From mboxrd@z Thu Jan 1 00:00:00 1970 Delivery-date: Wed, 30 Aug 2023 16:43:30 +0200 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by lore.white.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.94.2) (envelope-from ) id 1qbMPr-00Ejyv-FN for lore@lore.pengutronix.de; Wed, 30 Aug 2023 16:43:30 +0200 Received: from bombadil.infradead.org ([2607:7c80:54:3::133]) by metis.ext.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1qbMPn-0007Y3-9C for lore@pengutronix.de; Wed, 30 Aug 2023 16:43:29 +0200 DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: Content-Type:In-Reply-To:From:References:To:Subject:MIME-Version:Date: Message-ID:Reply-To:Cc:Content-ID:Content-Description:Resent-Date:Resent-From :Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=H1N3dVAID3hEANXP/vnNm31WRzmXQyrc8h7LDob5TJ0=; b=nuMjT+Bgd3o30jXTUwgiVrNIs9 7/W8T5oHg0mg2wSKqdomXcYK9GIBaByUAHU6qShgPWOzIcX3dn3XIBnJCzLEzm2RxDwUMEWLWuCDI NgJTq+SYQryirGnHlW230ssuDrpCIhZ2DhqcGB2tXrEkuxbvBQVekLfD41HWJNJkaqqUlblpZiCxd A6LzpMZSlQPHKBwoqDt+jJ8sHxKDMFAxCGNkirXefskL1achhYQovA9z/YLHVyZFAlHCJDG93YZVw x6HB7BaXxWMqPkro5xYYnL2AVL/vv3AR5jwUXhit+gO4EpctYiW21ooAWSgckZscykXqoaGOQ4MJR OehOvCNg==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.96 #2 (Red Hat Linux)) id 1qbMOR-00Dgcc-2z; Wed, 30 Aug 2023 14:42:03 +0000 Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.96 #2 (Red Hat Linux)) id 1qbMOL-00DgcD-2h for barebox@lists.infradead.org; Wed, 30 Aug 2023 14:42:02 +0000 Received: from ptz.office.stw.pengutronix.de ([2a0a:edc0:0:900:1d::77] helo=[127.0.0.1]) by metis.ext.pengutronix.de with esmtp (Exim 4.92) (envelope-from ) id 1qbMOK-0007Qa-8O; Wed, 30 Aug 2023 16:41:56 +0200 Message-ID: Date: Wed, 30 Aug 2023 16:41:55 +0200 MIME-Version: 1.0 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:102.0) Gecko/20100101 Thunderbird/102.13.0 Content-Language: en-US To: Alexander Shiyan , barebox@lists.infradead.org References: <20230830104747.43193-1-eagle.alexander923@gmail.com> <20230830104747.43193-3-eagle.alexander923@gmail.com> From: Ahmad Fatoum In-Reply-To: <20230830104747.43193-3-eagle.alexander923@gmail.com> Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 7bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20230830_074158_216122_F091B896 X-CRM114-Status: GOOD ( 38.08 ) X-BeenThere: barebox@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "barebox" X-SA-Exim-Connect-IP: 2607:7c80:54:3::133 X-SA-Exim-Mail-From: barebox-bounces+lore=pengutronix.de@lists.infradead.org X-Spam-Checker-Version: SpamAssassin 3.4.2 (2018-09-13) on metis.ext.pengutronix.de X-Spam-Level: X-Spam-Status: No, score=-5.5 required=4.0 tests=AWL,BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,HEADER_FROM_DIFFERENT_DOMAINS, MAILING_LIST_MULTI,NICE_REPLY_A,RCVD_IN_DNSWL_MED,SPF_HELO_NONE, SPF_NONE autolearn=unavailable autolearn_force=no version=3.4.2 Subject: Re: [PATCH 3/3] ARM: boards: Add MyirTech MYD-YA15XC-T development board support X-SA-Exim-Version: 4.2.1 (built Wed, 08 May 2019 21:11:16 +0000) X-SA-Exim-Scanned: Yes (on metis.ext.pengutronix.de) Hello Alexander, Thanks for your patch. A few comments below. On 30.08.23 12:47, Alexander Shiyan wrote: > Add basic support for the MyirTech MYD-YA15XC-T development board [1]. > ... > deep-probe: supported due to myir,myc-stm32mp15x > stm32mp-init: detected STM32MP151AAC Rev.Z > STM32 RCC reset reason POR (MP_RSTSR: 0x00000015) > Boot from SD... > psci psci.of: detected version 1.1 > stpmic1-i2c stpmic10: PMIC Chip Version: 0x21 > stm32-usbphyc 5a006000.usbphyc@5a006000.of: registered rev:1.0 > nand_base: device found, Manufacturer ID: 0x2c, Chip ID: 0xda > nand_base: Micron MT29F2G08ABAEAWP > nand_base: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64 > Bad block table found at page 131008, version 0x01 > Bad block table found at page 130944, version 0x01 > nand_read_bbt: bad block at 0x000000d60000 > nand_read_bbt: bad block at 0x000000fa0000 > nand_read_bbt: bad block at 0x00000d460000 > stm32_sdmmc 58005000.mmc@58005000.of: registered as mmc0 > mmc0: detected SD card version 2.0 > mmc0: registered mmc0 > stm32_sdmmc 58007000.mmc@58007000.of: registered as mmc1 > stm32-iwdg 5a002000.watchdog@5a002000.of: probed > Product name: MYC-YA151C-256N256D-65-I-T > Product serial: TW202103290400145 > malloc space: 0xc7ef7a80 -> 0xcfdef4ff (size 127 MiB) > envfs: no envfs (magic mismatch) - envfs never written? > NOTICE: ubi0: scanning is finished > NOTICE: ubi0: registering /dev/nand0.system.ubi > NOTICE: ubi0: registering kernel as /dev/nand0.system.ubi.kernel > NOTICE: ubi0: registering root as /dev/nand0.system.ubi.root > NOTICE: ubi0: registering bbox as /dev/nand0.system.ubi.bbox > NOTICE: ubi0: attached mtd0 (name "nand0.system", size 237 MiB) to ubi0 > NOTICE: ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes > NOTICE: ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048 > NOTICE: ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096 > NOTICE: ubi0: good PEBs: 1895, bad PEBs: 5, corrupted PEBs: 0 > NOTICE: ubi0: user volume: 3, internal volumes: 1, max. volumes count: 128 > NOTICE: ubi0: max/mean erase counter: 1/0, WL threshold: 65536, image sequence number: 3389077539 > NOTICE: ubi0: available PEBs: 529, total reserved PEBs: 1366, PEBs reserved for bad PEB handling: 35 > > Hit m for menu or any to stop autoboot: 2 > barebox@MYC-YA151C-256N256D-65-I-T:/ > ... > > [1] https://www.myirtech.com/list.asp?id=659 > > Signed-off-by: Alexander Shiyan > --- > arch/arm/boards/Makefile | 1 + > arch/arm/boards/myirtech-stm32/Makefile | 4 + > arch/arm/boards/myirtech-stm32/board.c | 143 +++++++ > arch/arm/boards/myirtech-stm32/lowlevel.c | 27 ++ > arch/arm/dts/Makefile | 1 + > arch/arm/dts/stm32mp15x-myirtech-myc.dtsi | 351 +++++++++++++++++ > arch/arm/dts/stm32mp15x-myirtech-myd.dts | 458 ++++++++++++++++++++++ > arch/arm/mach-stm32mp/Kconfig | 7 + > images/Makefile.stm32mp | 2 + > 9 files changed, 994 insertions(+) > create mode 100644 arch/arm/boards/myirtech-stm32/Makefile > create mode 100644 arch/arm/boards/myirtech-stm32/board.c > create mode 100644 arch/arm/boards/myirtech-stm32/lowlevel.c > create mode 100644 arch/arm/dts/stm32mp15x-myirtech-myc.dtsi > create mode 100644 arch/arm/dts/stm32mp15x-myirtech-myd.dts > > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile > index 83a3179185..2ff10329b2 100644 > --- a/arch/arm/boards/Makefile > +++ b/arch/arm/boards/Makefile > @@ -140,6 +140,7 @@ obj-$(CONFIG_MACH_SOLIDRUN_MICROSOM) += solidrun-microsom/ > obj-$(CONFIG_MACH_STM32MP15XX_DKX) += stm32mp15xx-dkx/ > obj-$(CONFIG_MACH_STM32MP13XX_DK) += stm32mp13xx-dk/ > obj-$(CONFIG_MACH_LXA_MC1) += lxa-mc1/ > +obj-$(CONFIG_MACH_MYIRTECH_STM32MP1) += myirtech-stm32/ > obj-$(CONFIG_MACH_STM32MP15X_EV1) += stm32mp15x-ev1/ > obj-$(CONFIG_MACH_TECHNEXION_PICO_HOBBIT) += technexion-pico-hobbit/ > obj-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += technexion-wandboard/ > diff --git a/arch/arm/boards/myirtech-stm32/Makefile b/arch/arm/boards/myirtech-stm32/Makefile > new file mode 100644 > index 0000000000..511d4971fa > --- /dev/null > +++ b/arch/arm/boards/myirtech-stm32/Makefile > @@ -0,0 +1,4 @@ > +# SPDX-License-Identifier: GPL-2.0-only > + > +lwl-y += lowlevel.o > +obj-y += board.o > diff --git a/arch/arm/boards/myirtech-stm32/board.c b/arch/arm/boards/myirtech-stm32/board.c > new file mode 100644 > index 0000000000..187a3b8a59 > --- /dev/null > +++ b/arch/arm/boards/myirtech-stm32/board.c > @@ -0,0 +1,143 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +struct id_eeprom { > + u8 hrcw_primary[0x10]; > + u8 pn[64]; > + u8 sn[64]; > + u8 mac0[6]; > + u8 mac1[6]; > +} __packed; You could describe this as nvmem-cells in the DT and you'd automatically get the MAC addresses assigned. > + > +static int stm32mp15x_myirtech_serial_fixup(struct device_node *root, void *unused) > +{ > + char *serial; > + > + serial = basprintf("%s", getenv("global.machine_id")); > + of_set_property(root, "serial-number", serial, strlen(serial) + 1, 1); > + free(serial); > + > + return 0; > +} > + > +static int stm32mp15x_myirtech_eeprom_init(void) > +{ > + struct id_eeprom eeprom; > + struct cdev *cdev; > + char str[64]; > + int len; > + > + if (!of_machine_is_compatible("myir,myc-stm32mp15x")) > + return 0; > + > + cdev = cdev_by_name("eeprom0"); > + if (!cdev) { > + pr_err("Can't find EEPROM\n"); > + return -ENODEV; > + } I think using nvmem cells would make the code less verbose. > + > + if (cdev_read(cdev, &eeprom, sizeof(eeprom), 0, 0) < 0) { > + pr_err("Can't read EEPROM\n"); > + return -EIO; > + } > + > + len = (eeprom.pn[0] - '0'); > + if ((len < 8) || (len > 64)) { > + pr_err("Unable to get product name\n"); > + return -EINVAL; > + } > + > + strncpy(str, &eeprom.pn[1], len); > + str[len] = '\0'; > + pr_info("Product name: %s\n", str); > + globalvar_add_simple("model", str); barebox_set_model()? > + > + len = (eeprom.sn[0] - '0'); > + if ((len < 8) || (len > 64)) { > + pr_err("Unable to get product serial\n"); > + return -EINVAL; > + } > + > + strncpy(str, &eeprom.sn[1], len); > + str[len] = '\0'; > + pr_info("Product serial: %s\n", str); Would barebox_set_serial_number() work for you? > + machine_id_set_hashable(str, len); Any particular reason why not to just use the SoC serial? > + of_register_fixup(stm32mp15x_myirtech_serial_fixup, NULL); > + > + if (!is_valid_ether_addr(eeprom.mac0)) { > + int i, j; > + > + /* Make fixed MAC-address based on serial number */ > + memcpy(eeprom.mac0, str, sizeof(eeprom.mac0)); > + for (i = sizeof(eeprom.mac0); i < len; i++) > + for (j = 0; j < sizeof(eeprom.mac0); j++) > + eeprom.mac0[j] ^= str[i]; > + } > + > + eth_register_ethaddr(0, eeprom.mac0); You could check if the nvmem cell exists and only do the fixup if it doesn't. Check Marco's recent Debix patches for an example of how to call nvmem from board code. > + > + return 0; > +} > +of_populate_initcall(stm32mp15x_myirtech_eeprom_init); Why can't this be moved into the probe function below? You may need to lookup the cdev device by alias though. > +static int stm32mp15x_myirtech_probe(struct device *dev) > +{ > + int instance = bootsource_get_instance(), def = -1; > + const enum bootsource bs = bootsource_get(); > + > + barebox_set_hostname("myir-stm32"); > + > + switch (bs) { > + case BOOTSOURCE_MMC: > + if (instance == 0) { > + of_device_enable_path("/chosen/environment-sd"); > + pr_info("Boot from SD...\n"); > + } else { > + of_device_enable_path("/chosen/environment-emmc"); > + pr_info("Boot from eMMC...\n"); > + } > + def = instance; > + break; > + case BOOTSOURCE_NAND: > + of_device_enable_path("/chosen/environment-nand"); > + pr_info("Boot from NAND...\n"); > + def = 2; > + break; > + default: > + return 0; > + } > + > + stm32mp_bbu_mmc_register_handler("sd", "/dev/mmc0.ssbl", > + (def == 0) ? BBU_HANDLER_FLAG_DEFAULT : 0); > + > + stm32mp_bbu_mmc_register_handler("emmc", "/dev/mmc1.ssbl", > + (def == 1) ? BBU_HANDLER_FLAG_DEFAULT : 0); What version of TF-A do you use? New versions only support FIP, so stm32mp_bbu_mmc_fip_register() is what you actually want to use. > + > + //TODO: NAND > + > + return 0; > +} > + > +static const struct of_device_id stm32mp15x_myirtech_of_match[] = { > + { .compatible = "myir,myc-stm32mp15x" }, > + { }, > +}; > +BAREBOX_DEEP_PROBE_ENABLE(stm32mp15x_myirtech_of_match); > + > +static struct driver stm32mp15x_myirtech_board_driver = { > + .name = "board-myirtech-stm32", > + .probe = stm32mp15x_myirtech_probe, > + .of_compatible = stm32mp15x_myirtech_of_match, > +}; > +device_platform_driver(stm32mp15x_myirtech_board_driver); > diff --git a/arch/arm/boards/myirtech-stm32/lowlevel.c b/arch/arm/boards/myirtech-stm32/lowlevel.c > new file mode 100644 > index 0000000000..715a8eeb96 > --- /dev/null > +++ b/arch/arm/boards/myirtech-stm32/lowlevel.c > @@ -0,0 +1,27 @@ > +// SPDX-License-Identifier: GPL-2.0+ > + > +#include > +#include > +#include > + > +extern char __dtb_z_stm32mp15x_myirtech_myd_start[]; > + > +static void setup_uart(void) > +{ > + /* first stage has set up the UART, so nothing to do here */ > + putc_ll('>'); > +} > + > +ENTRY_FUNCTION(start_stm32mp15x_myir, r0, r1, r2) > +{ > + void *fdt; > + > + stm32mp_cpu_lowlevel_init(); > + > + if (IS_ENABLED(CONFIG_DEBUG_LL)) > + setup_uart(); > + > + fdt = __dtb_z_stm32mp15x_myirtech_myd_start + get_runtime_offset(); > + > + stm32mp1_barebox_entry(fdt); Same question: Do you use an old TF-A or why do you need a specific entry point instead of barebox-stm32mp-generic-bl33.img? > +} > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 81e11bb6a3..b882c4942b 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -143,6 +143,7 @@ lwl-$(CONFIG_MACH_SEEED_ODYSSEY) += stm32mp157c-odyssey.dtb.o > lwl-$(CONFIG_MACH_STM32MP15XX_DKX) += stm32mp157c-dk2.dtb.o stm32mp157a-dk1.dtb.o > lwl-$(CONFIG_MACH_STM32MP13XX_DK) += stm32mp135f-dk.dtb.o > lwl-$(CONFIG_MACH_LXA_MC1) += stm32mp157c-lxa-mc1.dtb.o > +lwl-$(CONFIG_MACH_MYIRTECH_STM32MP1) += stm32mp15x-myirtech-myd.dtb.o > lwl-$(CONFIG_MACH_STM32MP15X_EV1) += stm32mp157c-ev1.dtb.o > lwl-$(CONFIG_MACH_SCB9328) += imx1-scb9328.dtb.o > lwl-$(CONFIG_MACH_TECHNEXION_WANDBOARD) += imx6q-wandboard.dtb.o imx6dl-wandboard.dtb.o > diff --git a/arch/arm/dts/stm32mp15x-myirtech-myc.dtsi b/arch/arm/dts/stm32mp15x-myirtech-myc.dtsi > new file mode 100644 > index 0000000000..7f843ad2ab > --- /dev/null > +++ b/arch/arm/dts/stm32mp15x-myirtech-myc.dtsi > @@ -0,0 +1,351 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* SPDX-FileCopyrightText: Alexander Shiyan, */ > + > +#include > +#include > +#include > + > +#include > +#include > +#include > + > +/ { > + model = "MYIR MYC-YA15XC-T"; > + compatible = "myir,myc-stm32mp15x", "st,stm32mp151"; > + > + aliases { > + i2c0 = &i2c1; > + i2c1 = &i2c2; > + i2c2 = &i2c3; > + i2c3 = &i2c4; > + i2c4 = &i2c5; > + i2c5 = &i2c6; > + }; You can add these to arch/arm/dts/stm32mp151.dtsi, so it's fixed for other boards as well. > + > + memory@c0000000 { > + device_type = "memory"; > + reg = <0xc0000000 0x10000000>; > + }; barebox will dynamically determine memory size and fix it up, so you can drop this node. > + > + reserved-memory { > + #address-cells = <1>; > + #size-cells = <1>; > + ranges; > + > + mcuram2: mcuram2@10000000 { > + compatible = "shared-dma-pool"; > + reg = <0x10000000 0x40000>; > + no-map; > + }; > + > + vdev0vring0: vdev0vring0@10040000 { > + compatible = "shared-dma-pool"; > + reg = <0x10040000 0x1000>; > + no-map; > + }; > + > + vdev0vring1: vdev0vring1@10041000 { > + compatible = "shared-dma-pool"; > + reg = <0x10041000 0x1000>; > + no-map; > + }; > + > + vdev0buffer: vdev0buffer@10042000 { > + compatible = "shared-dma-pool"; > + reg = <0x10042000 0x4000>; > + no-map; > + }; > + > + mcuram: mcuram@30000000 { > + compatible = "shared-dma-pool"; > + reg = <0x30000000 0x40000>; > + no-map; > + }; > + > + retram: retram@38000000 { > + compatible = "shared-dma-pool"; > + reg = <0x38000000 0x10000>; > + no-map; > + }; > + > + optee: optee@0xde000000 { > + reg = <0xde000000 0x02000000>; > + no-map; > + }; > + }; > + > + vin_som: vin_som { > + compatible = "regulator-fixed"; > + regulator-name = "vin_som"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + leds: leds { > + compatible = "gpio-leds"; > + > + led_cpu: led_cpu { > + label = "som:cpu"; > + color = ; > + default-state = "off"; > + function = LED_FUNCTION_CPU; > + gpios = <&gpioa 13 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; > + linux,default-trigger = LED_FUNCTION_CPU; > + }; > + }; > +}; > + > +&bsec { > + board_id: board_id@ec { > + reg = <0xec 0x4>; > + st,non-secure-otp; > + }; > +}; > + > +&cpu0 { > + cpu-supply = <&vddcore>; > +}; > + > +&dts { > + status = "okay"; > +}; > + > +&fmc { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&fmc_pins_a>; > + pinctrl-1 = <&fmc_sleep_pins_a>; > + status = "okay"; > + > + nand-controller@4,0 { > + status = "okay"; > + > + nand@0 { > + reg = <0>; > + nand-on-flash-bbt; > + nand-ecc-strength = <4>; > + nand-ecc-step-size = <512>; > + #address-cells = <1>; > + #size-cells = <1>; > + > + nand_parts: partitions { > + compatible = "fixed-partitions"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + partition@0 { > + label = "fsbl1"; > + reg = <0x0 0x80000>; > + }; > + > + partition@80000 { > + label = "fsbl2"; > + reg = <0x80000 0x80000>; > + }; > + > + partition@100000 { > + label = "matadata1"; > + reg = <0x100000 0x80000>; > + }; > + > + partition@180000 { > + label = "matadata2"; > + reg = <0x180000 0x80000>; > + }; > + > + partition@200000 { > + label = "fip-a1"; > + reg = <0x200000 0x400000>; > + }; > + > + partition@600000 { > + label = "fip-a2"; > + reg = <0x600000 0x400000>; > + }; > + > + partition@a00000 { > + label = "fip-b1"; > + reg = <0xa00000 0x400000>; > + }; > + > + partition@e00000 { > + label = "fip-b2"; > + reg = <0xe00000 0x400000>; > + }; > + > + partition@1200000 { > + label = "system"; > + reg = <0x01200000 0>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c4 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&i2c4_pins_a>; > + pinctrl-1 = <&i2c4_sleep_pins_a>; > + clock-frequency = <400000>; > + status = "okay"; > + > + pmic: stpmic@33 { > + compatible = "st,stpmic1"; > + reg = <0x33>; > + interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + regulators { > + compatible = "st,stpmic1-regulators"; > + buck1-supply = <&vin_som>; > + buck2-supply = <&vin_som>; > + buck3-supply = <&vin_som>; > + buck4-supply = <&vin_som>; > + ldo1-supply = <&v3v3>; > + ldo4-supply = <&vin_som>; > + vref_ddr-supply = <&vin_som>; > + boost-supply = <&vin_som>; > + pwr_sw1-supply = <&bst_out>; > + pwr_sw2-supply = <&bst_out>; > + > + vddcore: buck1 { > + regulator-name = "vddcore"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd_ddr: buck2 { > + regulator-name = "vdd_ddr"; > + regulator-min-microvolt = <1350000>; > + regulator-max-microvolt = <1350000>; > + regulator-always-on; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + vdd: buck3 { > + regulator-name = "vdd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + st,mask-reset; > + regulator-initial-mode = <0>; > + regulator-over-current-protection; > + }; > + > + v3v3: buck4 { > + regulator-name = "v3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + regulator-over-current-protection; > + regulator-initial-mode = <0>; > + }; > + > + vdda: ldo1 { > + regulator-name = "vdda"; > + regulator-min-microvolt = <1700000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + vtt_ddr: ldo3 { > + regulator-name = "vtt_ddr"; > + regulator-always-on; > + }; > + > + vdd_usb: ldo4 { > + regulator-name = "vdd_usb"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vref_ddr: vref_ddr { > + regulator-name = "vref_ddr"; > + regulator-always-on; > + regulator-over-current-protection; > + }; > + > + bst_out: boost { > + regulator-name = "bst_out"; > + }; > + > + vbus_otg: pwr_sw1 { > + regulator-name = "vbus_otg"; > + regulator-active-discharge; > + }; > + > + vbus_sw: pwr_sw2 { > + regulator-name = "vbus_sw"; > + regulator-active-discharge; > + }; > + }; > + > + onkey: onkey { > + compatible = "st,stpmic1-onkey"; > + interrupts = , ; > + interrupt-names = "onkey-falling", "onkey-rising"; > + power-off-time-sec = <10>; > + }; > + }; > + > + eeprom: eeprom@50 { > + compatible = "atmel,24c32"; > + reg = <0x50>; > + pagesize = <32>; > + num-addresses = <8>; > + wp-gpios = <&gpioa 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; > + }; > +}; > + > +&ipcc { > + status = "okay"; > +}; > + > +&iwdg2 { > + timeout-sec = <32>; > + status = "okay"; > +}; > + > +&m4_rproc { > + memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>, > + <&vdev0vring1>, <&vdev0buffer>; > + mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>; > + mbox-names = "vq0", "vq1", "shutdown", "detach"; > + interrupt-parent = <&exti>; > + interrupts = <68 IRQ_TYPE_EDGE_RISING>; > + status = "okay"; > +}; > + > +&pwr_regulators { > + vdd-supply = <&vdd>; > + vdd_3v3_usbfs-supply = <&vdd_usb>; > +}; > + > +&rng1 { > + status = "okay"; > +}; > + > +&rtc { > + status = "okay"; > +}; > + > +&sdmmc2 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a>; > + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a>; > + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; > + non-removable; > + no-sd; > + no-sdio; > + st,neg-edge; > + bus-width = <8>; > + vmmc-supply = <&v3v3>; > + vqmmc-supply = <&vdd>; > + mmc-ddr-3_3v; > + status = "okay"; > +}; > diff --git a/arch/arm/dts/stm32mp15x-myirtech-myd.dts b/arch/arm/dts/stm32mp15x-myirtech-myd.dts > new file mode 100644 > index 0000000000..b15a4312d4 > --- /dev/null > +++ b/arch/arm/dts/stm32mp15x-myirtech-myd.dts > @@ -0,0 +1,458 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* SPDX-FileCopyrightText: Alexander Shiyan, */ > + > +/dts-v1/; > + > +#include "stm32mp15x-myirtech-myc.dtsi" > + > +#include > + > +/ { > + model = "MYIR MYD-YA15XC-T"; > + compatible = "myir,myd-stm32mp15x", "myir,myc-stm32mp15x", "st,stm32mp151"; > + > + aliases { > + ethernet0 = ðernet0; > + serial0 = &uart4; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + backlight: backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm2 0 100000 0>; > + brightness-levels = <0 255>; > + num-interpolated-steps = <256>; > + default-brightness-level = <255>; > + }; > + > + panel: panel { > + compatible = "panel-lvds"; > + backlight = <&backlight>; > + data-mapping = "vesa-24"; > + enable-gpios = <&gpioi 3 (GPIO_ACTIVE_HIGH | GPIO_PUSH_PULL)>; > + power-supply = <&vdd_3v3>; > + height-mm = <0>; > + width-mm = <0>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <<dc_ep0_out>; > + }; > + }; > + }; Do you intend to enable a boot splash? :> I only tested the LTDC driver with parallel output. > + > + vin: vin { > + compatible = "regulator-fixed"; > + regulator-name = "vin"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + vdd_3v3: vdd_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "vdd_3v3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + vin-supply = <&v3v3>; > + }; > +}; > + > +&leds { > + led_live: led_live { > + label = "board:live"; > + color = ; > + default-state = "off"; > + function = LED_FUNCTION_HEARTBEAT; > + gpios = <&extgpio 4 GPIO_ACTIVE_LOW>; > + linux,default-trigger = LED_FUNCTION_HEARTBEAT; > + panic-indicator; > + }; > +}; > + > +&vin_som { > + vin-supply = <&vin>; > +}; > + > +&i2c2 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&i2c2_pins &i2c2_pins_z>; > + pinctrl-1 = <&i2c2_sleep_pins &i2c2_sleep_pins_z>; > + clock-frequency = <400000>; > + status = "okay"; > + > + extgpio: pcf8575@20 { > + compatible = "nxp,pcf8575"; > + reg = <0x20>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + typec: stusb1600@28 { > + pinctrl-names = "default"; > + pinctrl-0 = <&stusb1600_pins>; > + compatible = "st,stusb1600"; > + reg = <0x28>; > + interrupt-parent = <&gpioa>; > + interrupts = <10 IRQ_TYPE_EDGE_FALLING>; > + vdd-supply = <&vin>; > + > + connector { > + compatible = "usb-c-connector"; > + label = "USB-C"; > + power-role = "dual"; > + power-opmode = "default"; > + > + port { > + con_usbotg_hs_ep: endpoint { > + remote-endpoint = <&usbotg_hs_ep>; > + }; > + }; > + }; > + }; FYI, there's a simple Type C driver framework now, so you could port the stusb1600 driver from Linux quite easily if you want to base decisions on whether the device is in device or host mode. > + > + rx8025: rtc@32 { > + compatible = "epson,rx8025"; > + reg = <0x32>; > + }; > +}; > + > +ðernet0 { > + pinctrl-0 = <ðernet0_rgmii_pins_a>; > + pinctrl-1 = <ðernet0_rgmii_sleep_pins_a>; > + pinctrl-names = "default", "sleep"; > + max-speed = <1000>; > + phy-handle = <&phy0>; > + phy-mode = "rgmii-id"; > + status = "okay"; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + reset-gpios = <&gpiog 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; > + reset-delay-us = <10000>; > + reset-post-delay-us = <2000>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + phy0: ethernet-phy@6 { > + reg = <6>; > + qca,clk-out-frequency = <125000000>; > + qca,clk-out-strength = ; > + }; > + }; > +}; > + > +<dc { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <<dc_pins>; > + pinctrl-1 = <<dc_sleep_pins>; > + status = "okay"; > + > + port { > + ltdc_ep0_out: endpoint@0 { > + reg = <0>; > + remote-endpoint = <&panel_in>; > + }; > + }; > +}; > + > +&sai1 { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&sai1_pins>; > + pinctrl-1 = <&sai1_sleep_pins>; > + clocks = <&rcc SAI1>, <&rcc PLL3_Q>, <&rcc PLL3_R>; > + clock-names = "pclk", "x8k", "x11k"; > + status = "okay"; > +}; > + > +&sdmmc1 { > + pinctrl-names = "default", "opendrain", "sleep"; > + pinctrl-0 = <&sdmmc1_b4_pins_a>; > + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; > + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; > + cd-gpios = <&gpioa 3 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; > + disable-wp; > + st,neg-edge; > + vmmc-supply = <&vdd>; > + status = "okay"; > +}; > + > +&spi5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&spi5_pins>; > + cs-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>, > + <&gpiof 13 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; > + status = "okay"; > +}; > + > +&timers2 { > + status = "okay"; > + > + pwm2: pwm { > + pinctrl-names = "default", "sleep"; > + pinctrl-0 = <&tim2_pwm_pins>; > + pinctrl-1 = <&tim2_pwm_sleep_pins>; > + status = "okay"; > + }; > +}; > + > +&uart4 { > + pinctrl-names = "default", "sleep", "idle"; > + pinctrl-0 = <&uart4_pins>; > + pinctrl-1 = <&uart4_sleep_pins>; > + pinctrl-2 = <&uart4_idle_pins>; > + status = "okay"; > +}; > + > +&usbh_ehci { > + phys = <&usbphyc_port0>; > + phy-names = "usb"; > + status = "okay"; > +}; > + > +&usbotg_hs { > + phys = <&usbphyc_port1 0>; > + phy-names = "usb2-phy"; > + usb-role-switch; > + vbus-supply = <&vbus_otg>; > + status = "okay"; > + > + port { > + usbotg_hs_ep: endpoint { > + remote-endpoint = <&con_usbotg_hs_ep>; > + }; > + }; > +}; > + > +&usbphyc { > + status = "okay"; > +}; > + > +&usbphyc_port0 { > + phy-supply = <&vdd_usb>; > + st,tune-hs-dc-level = <2>; > + st,enable-fs-rftime-tuning; > + st,enable-hs-rftime-reduction; > + st,trim-hs-current = <15>; > + st,trim-hs-impedance = <1>; > + st,tune-squelch-level = <3>; > + st,tune-hs-rx-offset = <2>; > + st,no-lsfs-sc; > + > + connector { > + compatible = "usb-a-connector"; > + vbus-supply = <&vin>; > + }; > +}; > + > +&usbphyc_port1 { > + phy-supply = <&vdd_usb>; > + st,tune-hs-dc-level = <2>; > + st,enable-fs-rftime-tuning; > + st,enable-hs-rftime-reduction; > + st,trim-hs-current = <15>; > + st,trim-hs-impedance = <1>; > + st,tune-squelch-level = <3>; > + st,tune-hs-rx-offset = <2>; > + st,no-lsfs-sc; > +}; > + > +&pinctrl { > + i2c2_pins: i2c2-0 { > + pins { > + pinmux = ; /* I2C2_SCL */ > + bias-disable; > + drive-open-drain; > + slew-rate = <0>; > + }; > + }; > + > + i2c2_sleep_pins: i2c2-sleep-0 { > + pins { > + pinmux = ; /* I2C2_SCL */ > + }; > + }; > + > + ltdc_pins: ltdc-0 { > + pins { > + pinmux = , /* LCD_CLK */ > + , /* LCD_HSYNC */ > + , /* LCD_VSYNC */ > + , /* LCD_DE */ > + , /* LCD_R0 */ > + , /* LCD_R1 */ > + , /* LCD_R2 */ > + , /* LCD_R3 */ > + , /* LCD_R4 */ > + , /* LCD_R5 */ > + , /* LCD_R6 */ > + , /* LCD_R7 */ > + , /* LCD_G0 */ > + , /* LCD_G1 */ > + , /* LCD_G2 */ > + , /* LCD_G3 */ > + , /* LCD_G4 */ > + , /* LCD_G5 */ > + , /* LCD_G6 */ > + , /* LCD_G7 */ > + , /* LCD_B0 */ > + , /* LCD_B1 */ > + , /* LCD_B2 */ > + , /* LCD_B3 */ > + , /* LCD_B4 */ > + , /* LCD_B5 */ > + , /* LCD_B6 */ > + ; /* LCD_B7 */ > + bias-disable; > + drive-push-pull; > + slew-rate = <1>; > + }; > + }; > + > + ltdc_sleep_pins: ltdc-sleep-0 { > + pins { > + pinmux = , /* LCD_CLK */ > + , /* LCD_HSYNC */ > + , /* LCD_VSYNC */ > + , /* LCD_DE */ > + , /* LCD_R0 */ > + , /* LCD_R1 */ > + , /* LCD_R2 */ > + , /* LCD_R3 */ > + , /* LCD_R4 */ > + , /* LCD_R5 */ > + , /* LCD_R6 */ > + , /* LCD_R7 */ > + , /* LCD_G0 */ > + , /* LCD_G1 */ > + , /* LCD_G2 */ > + , /* LCD_G3 */ > + , /* LCD_G4 */ > + , /* LCD_G5 */ > + , /* LCD_G6 */ > + , /* LCD_G7 */ > + , /* LCD_B0 */ > + , /* LCD_B1 */ > + , /* LCD_B2 */ > + , /* LCD_B3 */ > + , /* LCD_B4 */ > + , /* LCD_B5 */ > + , /* LCD_B6 */ > + ; /* LCD_B7 */ > + }; > + }; > + > + sai1_pins: sai1-0 { > + pins1 { > + pinmux = , /* SAI1_SD_A */ > + , /* SAI1_SCK_B */ > + , /* SAI1_FS_B */ > + ; /* SAI1_MCLK_B */ > + slew-rate = <0>; > + drive-push-pull; > + bias-disable; > + }; > + pins2 { > + pinmux = ; /* SAI1_SD_B */ > + bias-disable; > + }; > + }; > + > + sai1_sleep_pins: sai1-sleep-0 { > + pins { > + pinmux = , /* SAI1_SD_A */ > + , /* SAI1_SCK_B */ > + , /* SAI1_FS_B */ > + , /* SAI1_MCLK_B */ > + ; /* SAI1_SD_B */ > + }; > + }; > + > + spi5_pins: spi5-0 { > + pins { > + pinmux = , /* SPI5_SCK */ > + ; /* SPI5_MOSI */ > + bias-disable; > + drive-push-pull; > + slew-rate = <1>; > + }; > + pins2 { > + pinmux = ; /* SPI5_MISO */ > + bias-disable; > + }; > + }; > + > + stusb1600_pins: stusb1600-0 { > + pins { > + pinmux = ; /* STUSB1600 IRQ */ > + bias-pull-up; > + }; > + }; > + > + tim2_pwm_pins: tim2-pwm-0 { > + pins { > + pinmux = ; /* TIM2_CH1 */ > + bias-disable; > + drive-push-pull; > + slew-rate = <0>; > + }; > + }; > + > + tim2_pwm_sleep_pins: tim2-pwm-sleep-0 { > + pins { > + pinmux = ; /* TIM2_CH1 */ > + }; > + }; > + > + uart4_pins: uart4-0 { > + pins1 { > + pinmux = ; /* UART4_TX */ > + bias-disable; > + drive-push-pull; > + slew-rate = <0>; > + }; > + pins2 { > + pinmux = ; /* UART4_RX */ > + bias-disable; > + }; > + }; > + > + uart4_idle_pins: uart4-idle-0 { > + pins1 { > + pinmux = ; /* UART4_TX */ > + }; > + pins2 { > + pinmux = ; /* UART4_RX */ > + bias-disable; > + }; > + }; > + > + uart4_sleep_pins: uart4-sleep-0 { > + pins1 { > + pinmux = , /* UART4_TX */ > + ; /* UART4_RX */ > + }; > + }; > +}; > + > +&pinctrl_z { > + i2c2_pins_z: i2c2-0 { > + pins { > + pinmux = ; /* I2C2_SDA */ > + bias-disable; > + drive-open-drain; > + slew-rate = <0>; > + }; > + }; > + > + i2c2_sleep_pins_z: i2c2-sleep-0 { > + pins { > + pinmux = ; /* I2C2_SDA */ > + }; > + }; > +}; > diff --git a/arch/arm/mach-stm32mp/Kconfig b/arch/arm/mach-stm32mp/Kconfig > index bc0a48d64c..358aad940c 100644 > --- a/arch/arm/mach-stm32mp/Kconfig > +++ b/arch/arm/mach-stm32mp/Kconfig > @@ -29,6 +29,13 @@ config MACH_LXA_MC1 > select ARCH_STM32MP157 > bool "Linux Automation MC-1 board" > > +config MACH_MYIRTECH_STM32MP1 > + bool "MYIR Tech Limited SOMs" > + select ARCH_STM32MP157 > + select MACHINE_ID > + help > + Say Y here if you are using a STM32MP15x based MYIR SOM > + > config MACH_SEEED_ODYSSEY > select ARCH_STM32MP157 > bool "Seeed Studio Odyssey" > diff --git a/images/Makefile.stm32mp b/images/Makefile.stm32mp > index 59d6572207..344dd41eb7 100644 > --- a/images/Makefile.stm32mp > +++ b/images/Makefile.stm32mp > @@ -36,6 +36,8 @@ $(call build_stm32mp_image, CONFIG_MACH_STM32MP15X_EV1, start_stm32mp15x_ev1, st > > $(call build_stm32mp_image, CONFIG_MACH_LXA_MC1, start_stm32mp157c_lxa_mc1, stm32mp157c-lxa-mc1) > > +$(call build_stm32mp_image, CONFIG_MACH_MYIRTECH_STM32MP1, start_stm32mp15x_myir, stm32mp15x-myir) > + > $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1a, prtt1a) > $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1s, prtt1s) > $(call build_stm32mp_image, CONFIG_MACH_PROTONIC_STM32MP1, start_prtt1c, prtt1c) -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |