Re: NXP Layerscape

[Ahmad Fatoum <a.fatoum@pengutronix.de>]

Hello Barbier,

On 10.06.21 15:49, Barbier, Renaud wrote:
> I received a NXP  LS1046A-RDB

It doesn't reboot cleanly with a USB serial adapter attached!
Jfyi, gave me a scare first time, when I thought I broke something ^^.

> 
> I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image.
> I programmed the image in the alternative SPI bank as per NXP instructions:
> =>	tftp $load_addr
> =>	sf erase 0 +$filesize && sf write $load_addr 0 $filesize
> 
> Barebox does not boot.
> 
> I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000.
> My understanding is that barebox is one image and shall be programmed at offset 0 of the SPI (0x40000000)

Can't comment on that. Sascha did the integration.

> At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector.
> 
> Any return on experience is welcome.

Can comment on that: Last time I did this, I wrote some documentation:
https://www.barebox.org/doc/latest/boards/layerscape.html

There I flashed barebox from another barebox booted from SD-Card.
I'd assume that should still work. I can't recall how the CPLD
needed to be tickled, but it would be helpful to know whether doing
it like described in the documentation doesn't work for you.

Cheers,
Ahmad

> 
> Cheers,
> Renaud
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox