mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: Hans Christian Lonstad <hcl@datarespons.com>,
	barebox@lists.infradead.org
Subject: Re: imx8 - gpc: Support IMX8 Lite
Date: Wed, 15 Mar 2023 10:22:44 +0100	[thread overview]
Message-ID: <ae056bad7244d1e6bde760add8bf37c3c044e325.camel@pengutronix.de> (raw)
In-Reply-To: <20230315070531.9697-1-hcl@datarespons.com>

Hi Hans Christian,

Am Mittwoch, dem 15.03.2023 um 08:05 +0100 schrieb Hans Christian Lonstad:
> IMX8 Lite lacks some functionality and hence the corresponding
> power domains (8, 11, 12, 13).
> This results in Barebox error messages and unfortunately a failed
> Linux kernel boot.
> Add a "Lite" specific table selected using device tree compatible
> clause.
> 
> Note that this should probably be related to the feature controller.

Yes, the lite versions of the SoC are usually just fused down versions
of the SoC and the fuses should tell you which features are actually
available. Please try to use the feature controller to disable the non
existent features/DT nodes. Adding a specific compatible and all this
code not look like the right way to go to me.

Regards,
Lucas

> 
> Signed-off-by: Hans Christian Lonstad <hcl@Datarespons.com>
> 
> diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
> index b662363f79..40998c42c5 100644
> --- a/drivers/soc/imx/gpcv2.c
> +++ b/drivers/soc/imx/gpcv2.c
> @@ -1053,6 +1053,192 @@ static const struct imx_pgc_domain imx8mp_pgc_domains[] = {
>  	},
>  };
>  
> +static const struct imx_pgc_domain imx8mpl_pgc_domains[] = {
> +	[IMX8MP_POWER_DOMAIN_MIPI_PHY1] = {
> +		.genpd = {
> +			.name = "mipi-phy1",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_MIPI_PHY1_SW_Pxx_REQ,
> +			.map = IMX8MP_MIPI_PHY1_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_MIPI1),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_PCIE_PHY] = {
> +		.genpd = {
> +			.name = "pcie-phy1",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_PCIE_PHY_SW_Pxx_REQ,
> +			.map = IMX8MP_PCIE_PHY_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_PCIE),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_USB1_PHY] = {
> +		.genpd = {
> +			.name = "usb-otg1",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_USB1_PHY_Pxx_REQ,
> +			.map = IMX8MP_USB1_PHY_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_USB1),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_USB2_PHY] = {
> +		.genpd = {
> +			.name = "usb-otg2",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_USB2_PHY_Pxx_REQ,
> +			.map = IMX8MP_USB2_PHY_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_USB2),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_MLMIX] = {
> +		.genpd = {
> +			.name = "mlmix",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_MLMIX_Pxx_REQ,
> +			.map = IMX8MP_MLMIX_A53_DOMAIN,
> +			.hskreq = IMX8MP_MLMIX_PWRDNREQN,
> +			.hskack = IMX8MP_MLMIX_PWRDNACKN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_MLMIX),
> +		.keep_clocks = true,
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_AUDIOMIX] = {
> +		.genpd = {
> +			.name = "audiomix",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_AUDIOMIX_Pxx_REQ,
> +			.map = IMX8MP_AUDIOMIX_A53_DOMAIN,
> +			.hskreq = IMX8MP_AUDIOMIX_PWRDNREQN,
> +			.hskack = IMX8MP_AUDIOMIX_PWRDNACKN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_AUDIOMIX),
> +		.keep_clocks = true,
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_GPU2D] = {
> +		.genpd = {
> +			.name = "gpu2d",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_GPU_2D_Pxx_REQ,
> +			.map = IMX8MP_GPU2D_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_GPU2D),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_GPUMIX] = {
> +		.genpd = {
> +			.name = "gpumix",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_GPU_SHARE_LOGIC_Pxx_REQ,
> +			.map = IMX8MP_GPUMIX_A53_DOMAIN,
> +			.hskreq = IMX8MP_GPUMIX_PWRDNREQN,
> +			.hskack = IMX8MP_GPUMIX_PWRDNACKN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_GPUMIX),
> +		.keep_clocks = true,
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_GPU3D] = {
> +		.genpd = {
> +			.name = "gpu3d",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_GPU_3D_Pxx_REQ,
> +			.map = IMX8MP_GPU3D_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_GPU3D),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_MEDIAMIX] = {
> +		.genpd = {
> +			.name = "mediamix",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_MEDIMIX_Pxx_REQ,
> +			.map = IMX8MP_MEDIAMIX_A53_DOMAIN,
> +			.hskreq = IMX8MP_MEDIAMIX_PWRDNREQN,
> +			.hskack = IMX8MP_MEDIAMIX_PWRDNACKN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_MEDIAMIX),
> +		.keep_clocks = true,
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_HDMIMIX] = {
> +		.genpd = {
> +			.name = "hdmimix",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_HDMIMIX_Pxx_REQ,
> +			.map = IMX8MP_HDMIMIX_A53_DOMAIN,
> +			.hskreq = IMX8MP_HDMIMIX_PWRDNREQN,
> +			.hskack = IMX8MP_HDMIMIX_PWRDNACKN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_HDMIMIX),
> +		.keep_clocks = true,
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_HDMI_PHY] = {
> +		.genpd = {
> +			.name = "hdmi-phy",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_HDMI_PHY_Pxx_REQ,
> +			.map = IMX8MP_HDMI_PHY_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_HDMI),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_MIPI_PHY2] = {
> +		.genpd = {
> +			.name = "mipi-phy2",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_MIPI_PHY2_Pxx_REQ,
> +			.map = IMX8MP_MIPI_PHY2_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_MIPI2),
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_HSIOMIX] = {
> +		.genpd = {
> +			.name = "hsiomix",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_HSIOMIX_Pxx_REQ,
> +			.map = IMX8MP_HSIOMIX_A53_DOMAIN,
> +			.hskreq = IMX8MP_HSIOMIX_PWRDNREQN,
> +			.hskack = IMX8MP_HSIOMIX_PWRDNACKN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_HSIOMIX),
> +		.keep_clocks = true,
> +	},
> +
> +	[IMX8MP_POWER_DOMAIN_MEDIAMIX_ISPDWP] = {
> +		.genpd = {
> +			.name = "mediamix-isp-dwp",
> +		},
> +		.bits = {
> +			.pxx = IMX8MP_MEDIA_ISP_DWP_Pxx_REQ,
> +			.map = IMX8MP_MEDIA_ISPDWP_A53_DOMAIN,
> +		},
> +		.pgc = BIT(IMX8MP_PGC_MEDIA_ISP_DWP),
> +	},
> +};
> +
> +
>  static const struct imx_pgc_regs imx8mp_pgc_regs = {
>  	.map = IMX8MP_GPC_PGC_CPU_MAPPING,
>  	.pup = IMX8MP_GPC_PU_PGC_SW_PUP_REQ,
> @@ -1065,6 +1251,12 @@ static const struct imx_pgc_domain_data imx8mp_pgc_domain_data = {
>  	.pgc_regs = &imx8mp_pgc_regs,
>  };
>  
> +static const struct imx_pgc_domain_data imx8mpl_pgc_domain_data = {
> +	.domains = imx8mpl_pgc_domains,
> +	.domains_num = ARRAY_SIZE(imx8mpl_pgc_domains),
> +	.pgc_regs = &imx8mp_pgc_regs,
> +};
> +
>  static const struct imx_pgc_domain imx8mn_pgc_domains[] = {
>  	[IMX8MN_POWER_DOMAIN_HSIOMIX] = {
>  		.genpd = {
> @@ -1302,6 +1494,7 @@ static const struct of_device_id imx_gpcv2_dt_ids[] = {
>  	{ .compatible = "fsl,imx8mm-gpc", .data = &imx8mm_pgc_domain_data, },
>  	{ .compatible = "fsl,imx8mn-gpc", .data = &imx8mn_pgc_domain_data, },
>  	{ .compatible = "fsl,imx8mp-gpc", .data = &imx8mp_pgc_domain_data, },
> +	{ .compatible = "fsl,imx8mpl-gpc", .data = &imx8mpl_pgc_domain_data, },
>  	{ .compatible = "fsl,imx8mq-gpc", .data = &imx8m_pgc_domain_data, },
>  	{ }
>  };
> 




      parent reply	other threads:[~2023-03-15  9:24 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-03-15  7:05 Hans Christian Lonstad
2023-03-15  9:13 ` Marco Felsch
2023-03-16 15:09   ` Hans Christian Lønstad
2023-04-14  7:47   ` Hans Christian Lønstad
2023-04-14  7:59     ` Ahmad Fatoum
2023-03-15  9:22 ` Lucas Stach [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ae056bad7244d1e6bde760add8bf37c3c044e325.camel@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=hcl@datarespons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox