From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from astoria.ccjclearline.com ([64.235.106.9]) by bombadil.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1RuoRf-0004Sw-RB for barebox@lists.infradead.org; Tue, 07 Feb 2012 17:03:08 +0000 Date: Tue, 7 Feb 2012 12:02:56 -0500 (EST) From: "Robert P. J. Day" In-Reply-To: Message-ID: References: MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: RE: "make distclean" doesn't remove generated MLO file To: "Premi, Sanjeev" Cc: "U-Boot Version 2 (barebox)" On Tue, 7 Feb 2012, Premi, Sanjeev wrote: > I usually compile both stages together with a 'make clean' in > between, hence decided to preserve MLO. Makes it easy to copy both > MLO and barebox.bin at same time. is there any sort of requirement about cleaning in between those two steps? if there is, that's a potential "gotcha" that should be clearly documented. rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ======================================================================== _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox