On Thu, 9 Feb 2012, Eric Bénard wrote: > Hi, > Le Wed, 8 Feb 2012 17:20:45 -0500 (EST), > "Robert P. J. Day" a écrit : > > just for fun, i configured and built MLO and barebox.bin for the > > panda, then tried to use that on a panda ES -- got no response > > whatever from minicom. i did verify that i could boot to barebox just > > fine on a regular panda, though. > > > > this is different from the case of a regular beagle and beagle xM, > > for which the MLO and barebox.bin boot just fine on an xM, so there's > > clearly a significant difference between those two panda variants as > > far as barebox is concerned. i haven't had any time to look at it in > > more detail yet. > > > Panda ES has a OMAP4460 @ 1.2GHz Panda has a OMAP4430 @ 1GHz. > This patch series shows that some changes are really needed to switch > from the 4430 to the 4460 : > http://lists.denx.de/pipermail/u-boot/2011-July/096351.html yup, i'm already looking at that. hoping i'm not out of my depth here, but i like a challenge. :-) rday -- ======================================================================== Robert P. J. Day Ottawa, Ontario, CANADA http://crashcourse.ca Twitter: http://twitter.com/rpjday LinkedIn: http://ca.linkedin.com/in/rpjday ========================================================================