mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] mach-imx: Add/correct help info in mach-imx/Kconfig
@ 2012-11-19 14:58 Robert P. J. Day
  2012-11-20  8:01 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Robert P. J. Day @ 2012-11-19 14:58 UTC (permalink / raw)
  To: U-Boot Version 2 (barebox)


Update help info, it's slightly out of date, and a grammatical fix.
No functional change.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>

---

  are there any other updates that can be made to that help info?

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index cca8394..3f4b452 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -65,15 +65,15 @@ choice
 	  used to setup SDRAM. The internal ROM code then initializes SDRAM
 	  using the register/value table, loads the whole barebox image to
 	  SDRAM and starts it. The internal boot mode is available on newer
-	  i.MX processors (i.MX25, i.MX35, i.MX51 and i.MX53). and supports
-	  booting from NOR, NAND, MMC/SD and serial ROMs.
-	  The external boot mode only supports booting from NAND and NOR. With
+	  i.MX processors (i.MX25, i.MX35, i.MX51, i.MX53 and i.MX6), and
+	  supports booting from NOR, NAND, MMC/SD and serial ROMs.
+	  The external boot mode supports booting only from NAND and NOR. With
 	  NOR flash the image is just started in NOR flash. With NAND flash
 	  the NAND controller loads the first 2kbyte from NAND into the NAND
 	  controllers internal SRAM where it is then started. It's the
 	  responsibility of these 2kbyte to load the rest of the boot image.
 	  The external boot mode is supported on older i.MX processors (i.MX1,
-	  i.MX21, i.MX25, i.MX27, i.MX21, i.MX35).
+	  i.MX21, i.MX25, i.MX27, i.MX31, i.MX35).

 config ARCH_IMX_INTERNAL_BOOT
 	bool "support internal boot mode"

-- 

========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                        http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2012-11-20  8:01 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-11-19 14:58 [PATCH] mach-imx: Add/correct help info in mach-imx/Kconfig Robert P. J. Day
2012-11-20  8:01 ` Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox