mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Robert P. J. Day" <rpjday@crashcourse.ca>
To: "U-Boot Version 2 (barebox)" <barebox@lists.infradead.org>
Subject: unused CONFIG variables in current barebox tree
Date: Sun, 20 Dec 2009 06:38:55 -0500 (EST)	[thread overview]
Message-ID: <alpine.LFD.2.00.0912200633440.15922@localhost> (raw)


  not sure if this is where this sort of thing should be posted, but i
used one of my stock kernel scanning scripts on the current barebox
tree to locate any CONFIG variables that are defined in a Kconfig file
somewhere but never subsequently tested in a preprocessor directive,
and here's the output.  (it would be trivial to run the other scripts
to locate more oddities.)


===== ARCH_LINUX
arch/sandbox/Kconfig:14:config ARCH_LINUX
===== BFIN_BOOT_FLASH8
arch/blackfin/Kconfig:58:config BFIN_BOOT_FLASH8
===== CMD_SAVES
commands/Kconfig:141:config CMD_SAVES
===== CPU_32
arch/arm/cpu/Kconfig:3:config CPU_32
===== EARLY_CONSOLE_BAUDRATE
common/Kconfig:304:config EARLY_CONSOLE_BAUDRATE
===== EARLY_CONSOLE_PORT
arch/ppc/mach-mpc5xxx/Kconfig:14:config EARLY_CONSOLE_PORT
common/Kconfig:295:config EARLY_CONSOLE_PORT
===== EARLY_CONSOLE_PORT
arch/ppc/mach-mpc5xxx/Kconfig:14:config EARLY_CONSOLE_PORT
common/Kconfig:295:config EARLY_CONSOLE_PORT
===== EUKREA_CPUIMX27_NOR_32MB
arch/arm/mach-imx/Kconfig:278:config EUKREA_CPUIMX27_NOR_32MB
===== HAS_CFI
arch/arm/mach-at91rm9200/Kconfig:18:	select HAS_CFI
arch/arm/mach-netx/Kconfig:49:	select HAS_CFI
arch/arm/mach-imx/Kconfig:85:	select HAS_CFI
arch/arm/mach-imx/Kconfig:105:	select HAS_CFI
arch/arm/mach-imx/Kconfig:126:	select HAS_CFI
arch/arm/mach-imx/Kconfig:146:	select HAS_CFI
arch/arm/mach-imx/Kconfig:155:	select HAS_CFI
arch/arm/mach-imx/Kconfig:171:	select HAS_CFI
arch/arm/mach-imx/Kconfig:215:	select HAS_CFI
arch/arm/mach-imx/Kconfig:223:        select HAS_CFI
arch/ppc/Kconfig:54:	select HAS_CFI
arch/m68k/Kconfig:77:	select HAS_CFI
arch/m68k/Kconfig:85:	select HAS_CFI
arch/m68k/Kconfig:94:	select HAS_CFI
arch/m68k/Kconfig:102:	select HAS_CFI
arch/m68k/Kconfig:110:	select HAS_CFI
arch/m68k/Kconfig:119:	select HAS_CFI
arch/m68k/Kconfig:128:	select HAS_CFI
arch/m68k/Kconfig:137:	select HAS_CFI
drivers/nor/Kconfig:3:config HAS_CFI
===== M68K
arch/m68k/include/asm/byteorder.h:24: * M68K is always big-endian mode.
arch/m68k/include/asm/coldfire/mcf5xxx.h:28: * Common M68K & ColdFire definitions
arch/m68k/Kconfig:49:config M68K
arch/m68k/cpu/cpu.c:157: * For M68K we never enable data cache so we do not need to disable it again.
commands/bootm.c:141:	case IH_CPU_M68K:	arch = "M68K"; 			break;
include/image.h:76:#define IH_CPU_M68K		12	/* M68K		*/
===== MTD_NAND_DISKONCHIP_BBTWRITE
drivers/nand/Kconfig:86:config MTD_NAND_DISKONCHIP_BBTWRITE
drivers/nand/diskonchip.c:123:#ifdef MTD_NAND_DISKONCHIP_BBTWRITE
===== PARTITION
common/Kconfig:316:config PARTITION
drivers/nand/diskonchip.c:1287:		printk(KERN_INFO	"    PARTITION[%d] ->\n"
===== PCM043_DISPLAY_TY090
arch/arm/mach-imx/Kconfig:243:config PCM043_DISPLAY_TY090

rday
--

========================================================================
Robert P. J. Day                               Waterloo, Ontario, CANADA

            Linux Consulting, Training and Kernel Pedantry.

Web page:                                          http://crashcourse.ca
Twitter:                                       http://twitter.com/rpjday
========================================================================

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2009-12-20 11:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-20 11:38 Robert P. J. Day [this message]
2009-12-21  9:09 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=alpine.LFD.2.00.0912200633440.15922@localhost \
    --to=rpjday@crashcourse.ca \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox