mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address
@ 2022-05-05  7:36 Alexander Shiyan
  2022-05-05  7:55 ` Lucas Stach
  2022-05-05  8:13 ` Sascha Hauer
  0 siblings, 2 replies; 6+ messages in thread
From: Alexander Shiyan @ 2022-05-05  7:36 UTC (permalink / raw)
  To: barebox; +Cc: Alexander Shiyan

Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
---
 arch/arm/boards/afi-gf/lowlevel.c            |  2 +-
 arch/arm/boards/beagle/lowlevel.c            |  2 +-
 arch/arm/boards/beaglebone/lowlevel.c        |  2 +-
 arch/arm/boards/myirtech-x335x/lowlevel.c    |  2 +-
 arch/arm/boards/phytec-som-am335x/lowlevel.c |  2 +-
 arch/arm/boards/vscom-baltos/lowlevel.c      |  2 +-
 arch/arm/boards/wago-pfc-am35xx/lowlevel.c   |  2 +-
 arch/arm/mach-omap/include/mach/debug_ll.h   | 43 ++++++++++++--------
 8 files changed, 33 insertions(+), 24 deletions(-)

diff --git a/arch/arm/boards/afi-gf/lowlevel.c b/arch/arm/boards/afi-gf/lowlevel.c
index de40f6c5af..9e86b29b2d 100644
--- a/arch/arm/boards/afi-gf/lowlevel.c
+++ b/arch/arm/boards/afi-gf/lowlevel.c
@@ -230,7 +230,7 @@ static noinline int gf_sram_init(void)
 
 	am33xx_uart_soft_reset((void *)AM33XX_UART2_BASE);
 	am33xx_enable_uart2_pin_mux();
-	omap_uart_lowlevel_init((void *)AM33XX_UART2_BASE);
+	omap_uart_lowlevel_init();
 	putc_ll('>');
 
 	barebox_arm_entry(0x80000000, SZ_256M, fdt);
diff --git a/arch/arm/boards/beagle/lowlevel.c b/arch/arm/boards/beagle/lowlevel.c
index 683ab552f4..c64a2114d4 100644
--- a/arch/arm/boards/beagle/lowlevel.c
+++ b/arch/arm/boards/beagle/lowlevel.c
@@ -196,7 +196,7 @@ static noinline int beagle_board_init(void)
 
 	mux_config();
 
-	omap_uart_lowlevel_init((void *)OMAP3_UART3_BASE);
+	omap_uart_lowlevel_init();
 
 	/* Dont reconfigure SDRAM while running in SDRAM! */
 	if (!in_sdram)
diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
index 544e396e03..365ba64a79 100644
--- a/arch/arm/boards/beaglebone/lowlevel.c
+++ b/arch/arm/boards/beaglebone/lowlevel.c
@@ -139,7 +139,7 @@ static noinline int beaglebone_sram_init(void)
 
 	am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
 	am33xx_enable_uart0_pin_mux();
-	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
+	omap_uart_lowlevel_init();
 	putc_ll('>');
 
 	barebox_arm_entry(0x80000000, sdram_size, fdt);
diff --git a/arch/arm/boards/myirtech-x335x/lowlevel.c b/arch/arm/boards/myirtech-x335x/lowlevel.c
index 1a883da203..da47300d81 100644
--- a/arch/arm/boards/myirtech-x335x/lowlevel.c
+++ b/arch/arm/boards/myirtech-x335x/lowlevel.c
@@ -98,7 +98,7 @@ ENTRY_FUNCTION(start_am33xx_myirtech_sram, bootinfo, r1, r2)
 	if (IS_ENABLED(CONFIG_DEBUG_LL)) {
 		am33xx_uart_soft_reset(IOMEM(AM33XX_UART0_BASE));
 		am33xx_enable_uart0_pin_mux();
-		omap_uart_lowlevel_init(IOMEM(AM33XX_UART0_BASE));
+		omap_uart_lowlevel_init();
 		putc_ll('>');
 	}
 
diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
index bffb3ad880..e4f3edd211 100644
--- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
@@ -172,7 +172,7 @@ static noinline void physom_board_init(void *fdt, int sdram, int module_family)
 
 	am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
 	am33xx_enable_uart0_pin_mux();
-	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
+	omap_uart_lowlevel_init();
 	putc_ll('>');
 
 	am335x_barebox_entry(fdt);
diff --git a/arch/arm/boards/vscom-baltos/lowlevel.c b/arch/arm/boards/vscom-baltos/lowlevel.c
index 7da2f92efb..2401cf20c4 100644
--- a/arch/arm/boards/vscom-baltos/lowlevel.c
+++ b/arch/arm/boards/vscom-baltos/lowlevel.c
@@ -104,7 +104,7 @@ static noinline void baltos_sram_init(void)
 
 	am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
 	am33xx_enable_uart0_pin_mux();
-	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
+	omap_uart_lowlevel_init();
 	putc_ll('>');
 
 	am335x_barebox_entry(fdt);
diff --git a/arch/arm/boards/wago-pfc-am35xx/lowlevel.c b/arch/arm/boards/wago-pfc-am35xx/lowlevel.c
index 7da8fd0331..6a7f350dda 100644
--- a/arch/arm/boards/wago-pfc-am35xx/lowlevel.c
+++ b/arch/arm/boards/wago-pfc-am35xx/lowlevel.c
@@ -185,7 +185,7 @@ static noinline void pfc200_board_init(void)
 
 	if (IS_ENABLED(CONFIG_DEBUG_LL)) {
 		am33xx_uart_soft_reset(IOMEM(OMAP3_UART3_BASE));
-		omap_uart_lowlevel_init(IOMEM(OMAP3_UART3_BASE));
+		omap_uart_lowlevel_init();
 		putc_ll('>');
 	}
 
diff --git a/arch/arm/mach-omap/include/mach/debug_ll.h b/arch/arm/mach-omap/include/mach/debug_ll.h
index 25ddd485be..30a0d830c3 100644
--- a/arch/arm/mach-omap/include/mach/debug_ll.h
+++ b/arch/arm/mach-omap/include/mach/debug_ll.h
@@ -22,6 +22,8 @@
 #include <mach/omap4-silicon.h>
 #include <mach/am33xx-silicon.h>
 
+#ifdef CONFIG_DEBUG_LL
+
 #define LSR_THRE	0x20	/* Xmit holding register empty */
 #define LCR_BKSE	0x80	/* Bank select enable */
 #define LSR		(5 << 2)
@@ -34,22 +36,6 @@
 #define MCR		(4 << 2)
 #define MDR		(8 << 2)
 
-static inline void omap_uart_lowlevel_init(void __iomem *base)
-{
-	writeb(0x00, base + LCR);
-	writeb(0x00, base + IER);
-	writeb(0x07, base + MDR);
-	writeb(LCR_BKSE, base + LCR);
-	writeb(26, base + DLL); /* 115200 */
-	writeb(0, base + DLM);
-	writeb(0x03, base + LCR);
-	writeb(0x03, base + MCR);
-	writeb(0x07, base + FCR);
-	writeb(0x00, base + MDR);
-}
-
-#ifdef CONFIG_DEBUG_LL
-
 #ifdef CONFIG_DEBUG_OMAP3_UART
 #define OMAP_DEBUG_SOC OMAP3
 #elif defined CONFIG_DEBUG_OMAP4_UART
@@ -63,6 +49,23 @@ static inline void omap_uart_lowlevel_init(void __iomem *base)
 #define __OMAP_UART_BASE(soc, num) soc##_UART##num##_BASE
 #define OMAP_UART_BASE(soc, num) __OMAP_UART_BASE(soc, num)
 
+static inline void omap_uart_lowlevel_init(void)
+{
+	void __iomem *base = (void *)OMAP_UART_BASE(OMAP_DEBUG_SOC,
+			CONFIG_DEBUG_OMAP_UART_PORT);
+
+	writeb(0x00, base + LCR);
+	writeb(0x00, base + IER);
+	writeb(0x07, base + MDR);
+	writeb(LCR_BKSE, base + LCR);
+	writeb(26, base + DLL); /* 115200 */
+	writeb(0, base + DLM);
+	writeb(0x03, base + LCR);
+	writeb(0x03, base + MCR);
+	writeb(0x07, base + FCR);
+	writeb(0x00, base + MDR);
+}
+
 static inline void PUTC_LL(char c)
 {
 	void __iomem *base = (void *)OMAP_UART_BASE(OMAP_DEBUG_SOC,
@@ -75,6 +78,12 @@ static inline void PUTC_LL(char c)
 	/* Wait to make sure it hits the line, in case we die too soon. */
 	while ((readb(base + LSR) & LSR_THRE) == 0);
 }
-#endif
+#else /* CONFIG_DEBUG_LL */
+
+static inline void omap_uart_lowlevel_init(void)
+{
+}
+
+#endif /* CONFIG_DEBUG_LL */
 
 #endif
-- 
2.32.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address
  2022-05-05  7:36 [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address Alexander Shiyan
@ 2022-05-05  7:55 ` Lucas Stach
  2022-05-05  8:01   ` Alexander Shiyan
  2022-05-05  8:13 ` Sascha Hauer
  1 sibling, 1 reply; 6+ messages in thread
From: Lucas Stach @ 2022-05-05  7:55 UTC (permalink / raw)
  To: Alexander Shiyan, barebox

Am Donnerstag, dem 05.05.2022 um 10:36 +0300 schrieb Alexander Shiyan:
> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>

Is this really a change in the right direction? The way it is currently
done seems to mix well with overall multi-image theme of Barebox. By
using a Kconfig for that, the setting will most likely be wrong for a
subset of boards in a multi-image build.

Regards,
Lucas

> ---
>  arch/arm/boards/afi-gf/lowlevel.c            |  2 +-
>  arch/arm/boards/beagle/lowlevel.c            |  2 +-
>  arch/arm/boards/beaglebone/lowlevel.c        |  2 +-
>  arch/arm/boards/myirtech-x335x/lowlevel.c    |  2 +-
>  arch/arm/boards/phytec-som-am335x/lowlevel.c |  2 +-
>  arch/arm/boards/vscom-baltos/lowlevel.c      |  2 +-
>  arch/arm/boards/wago-pfc-am35xx/lowlevel.c   |  2 +-
>  arch/arm/mach-omap/include/mach/debug_ll.h   | 43 ++++++++++++--------
>  8 files changed, 33 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boards/afi-gf/lowlevel.c b/arch/arm/boards/afi-gf/lowlevel.c
> index de40f6c5af..9e86b29b2d 100644
> --- a/arch/arm/boards/afi-gf/lowlevel.c
> +++ b/arch/arm/boards/afi-gf/lowlevel.c
> @@ -230,7 +230,7 @@ static noinline int gf_sram_init(void)
>  
>  	am33xx_uart_soft_reset((void *)AM33XX_UART2_BASE);
>  	am33xx_enable_uart2_pin_mux();
> -	omap_uart_lowlevel_init((void *)AM33XX_UART2_BASE);
> +	omap_uart_lowlevel_init();
>  	putc_ll('>');
>  
>  	barebox_arm_entry(0x80000000, SZ_256M, fdt);
> diff --git a/arch/arm/boards/beagle/lowlevel.c b/arch/arm/boards/beagle/lowlevel.c
> index 683ab552f4..c64a2114d4 100644
> --- a/arch/arm/boards/beagle/lowlevel.c
> +++ b/arch/arm/boards/beagle/lowlevel.c
> @@ -196,7 +196,7 @@ static noinline int beagle_board_init(void)
>  
>  	mux_config();
>  
> -	omap_uart_lowlevel_init((void *)OMAP3_UART3_BASE);
> +	omap_uart_lowlevel_init();
>  
>  	/* Dont reconfigure SDRAM while running in SDRAM! */
>  	if (!in_sdram)
> diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beaglebone/lowlevel.c
> index 544e396e03..365ba64a79 100644
> --- a/arch/arm/boards/beaglebone/lowlevel.c
> +++ b/arch/arm/boards/beaglebone/lowlevel.c
> @@ -139,7 +139,7 @@ static noinline int beaglebone_sram_init(void)
>  
>  	am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
>  	am33xx_enable_uart0_pin_mux();
> -	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
> +	omap_uart_lowlevel_init();
>  	putc_ll('>');
>  
>  	barebox_arm_entry(0x80000000, sdram_size, fdt);
> diff --git a/arch/arm/boards/myirtech-x335x/lowlevel.c b/arch/arm/boards/myirtech-x335x/lowlevel.c
> index 1a883da203..da47300d81 100644
> --- a/arch/arm/boards/myirtech-x335x/lowlevel.c
> +++ b/arch/arm/boards/myirtech-x335x/lowlevel.c
> @@ -98,7 +98,7 @@ ENTRY_FUNCTION(start_am33xx_myirtech_sram, bootinfo, r1, r2)
>  	if (IS_ENABLED(CONFIG_DEBUG_LL)) {
>  		am33xx_uart_soft_reset(IOMEM(AM33XX_UART0_BASE));
>  		am33xx_enable_uart0_pin_mux();
> -		omap_uart_lowlevel_init(IOMEM(AM33XX_UART0_BASE));
> +		omap_uart_lowlevel_init();
>  		putc_ll('>');
>  	}
>  
> diff --git a/arch/arm/boards/phytec-som-am335x/lowlevel.c b/arch/arm/boards/phytec-som-am335x/lowlevel.c
> index bffb3ad880..e4f3edd211 100644
> --- a/arch/arm/boards/phytec-som-am335x/lowlevel.c
> +++ b/arch/arm/boards/phytec-som-am335x/lowlevel.c
> @@ -172,7 +172,7 @@ static noinline void physom_board_init(void *fdt, int sdram, int module_family)
>  
>  	am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
>  	am33xx_enable_uart0_pin_mux();
> -	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
> +	omap_uart_lowlevel_init();
>  	putc_ll('>');
>  
>  	am335x_barebox_entry(fdt);
> diff --git a/arch/arm/boards/vscom-baltos/lowlevel.c b/arch/arm/boards/vscom-baltos/lowlevel.c
> index 7da2f92efb..2401cf20c4 100644
> --- a/arch/arm/boards/vscom-baltos/lowlevel.c
> +++ b/arch/arm/boards/vscom-baltos/lowlevel.c
> @@ -104,7 +104,7 @@ static noinline void baltos_sram_init(void)
>  
>  	am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE);
>  	am33xx_enable_uart0_pin_mux();
> -	omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE);
> +	omap_uart_lowlevel_init();
>  	putc_ll('>');
>  
>  	am335x_barebox_entry(fdt);
> diff --git a/arch/arm/boards/wago-pfc-am35xx/lowlevel.c b/arch/arm/boards/wago-pfc-am35xx/lowlevel.c
> index 7da8fd0331..6a7f350dda 100644
> --- a/arch/arm/boards/wago-pfc-am35xx/lowlevel.c
> +++ b/arch/arm/boards/wago-pfc-am35xx/lowlevel.c
> @@ -185,7 +185,7 @@ static noinline void pfc200_board_init(void)
>  
>  	if (IS_ENABLED(CONFIG_DEBUG_LL)) {
>  		am33xx_uart_soft_reset(IOMEM(OMAP3_UART3_BASE));
> -		omap_uart_lowlevel_init(IOMEM(OMAP3_UART3_BASE));
> +		omap_uart_lowlevel_init();
>  		putc_ll('>');
>  	}
>  
> diff --git a/arch/arm/mach-omap/include/mach/debug_ll.h b/arch/arm/mach-omap/include/mach/debug_ll.h
> index 25ddd485be..30a0d830c3 100644
> --- a/arch/arm/mach-omap/include/mach/debug_ll.h
> +++ b/arch/arm/mach-omap/include/mach/debug_ll.h
> @@ -22,6 +22,8 @@
>  #include <mach/omap4-silicon.h>
>  #include <mach/am33xx-silicon.h>
>  
> +#ifdef CONFIG_DEBUG_LL
> +
>  #define LSR_THRE	0x20	/* Xmit holding register empty */
>  #define LCR_BKSE	0x80	/* Bank select enable */
>  #define LSR		(5 << 2)
> @@ -34,22 +36,6 @@
>  #define MCR		(4 << 2)
>  #define MDR		(8 << 2)
>  
> -static inline void omap_uart_lowlevel_init(void __iomem *base)
> -{
> -	writeb(0x00, base + LCR);
> -	writeb(0x00, base + IER);
> -	writeb(0x07, base + MDR);
> -	writeb(LCR_BKSE, base + LCR);
> -	writeb(26, base + DLL); /* 115200 */
> -	writeb(0, base + DLM);
> -	writeb(0x03, base + LCR);
> -	writeb(0x03, base + MCR);
> -	writeb(0x07, base + FCR);
> -	writeb(0x00, base + MDR);
> -}
> -
> -#ifdef CONFIG_DEBUG_LL
> -
>  #ifdef CONFIG_DEBUG_OMAP3_UART
>  #define OMAP_DEBUG_SOC OMAP3
>  #elif defined CONFIG_DEBUG_OMAP4_UART
> @@ -63,6 +49,23 @@ static inline void omap_uart_lowlevel_init(void __iomem *base)
>  #define __OMAP_UART_BASE(soc, num) soc##_UART##num##_BASE
>  #define OMAP_UART_BASE(soc, num) __OMAP_UART_BASE(soc, num)
>  
> +static inline void omap_uart_lowlevel_init(void)
> +{
> +	void __iomem *base = (void *)OMAP_UART_BASE(OMAP_DEBUG_SOC,
> +			CONFIG_DEBUG_OMAP_UART_PORT);
> +
> +	writeb(0x00, base + LCR);
> +	writeb(0x00, base + IER);
> +	writeb(0x07, base + MDR);
> +	writeb(LCR_BKSE, base + LCR);
> +	writeb(26, base + DLL); /* 115200 */
> +	writeb(0, base + DLM);
> +	writeb(0x03, base + LCR);
> +	writeb(0x03, base + MCR);
> +	writeb(0x07, base + FCR);
> +	writeb(0x00, base + MDR);
> +}
> +
>  static inline void PUTC_LL(char c)
>  {
>  	void __iomem *base = (void *)OMAP_UART_BASE(OMAP_DEBUG_SOC,
> @@ -75,6 +78,12 @@ static inline void PUTC_LL(char c)
>  	/* Wait to make sure it hits the line, in case we die too soon. */
>  	while ((readb(base + LSR) & LSR_THRE) == 0);
>  }
> -#endif
> +#else /* CONFIG_DEBUG_LL */
> +
> +static inline void omap_uart_lowlevel_init(void)
> +{
> +}
> +
> +#endif /* CONFIG_DEBUG_LL */
>  
>  #endif



_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address
  2022-05-05  7:55 ` Lucas Stach
@ 2022-05-05  8:01   ` Alexander Shiyan
  2022-05-05  8:09     ` Ahmad Fatoum
  0 siblings, 1 reply; 6+ messages in thread
From: Alexander Shiyan @ 2022-05-05  8:01 UTC (permalink / raw)
  To: Lucas Stach; +Cc: barebox

чт, 5 мая 2022 г. в 10:55, Lucas Stach <l.stach@pengutronix.de>:
> Am Donnerstag, dem 05.05.2022 um 10:36 +0300 schrieb Alexander Shiyan:
> > Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> Is this really a change in the right direction? The way it is currently
> done seems to mix well with overall multi-image theme of Barebox. By
> using a Kconfig for that, the setting will most likely be wrong for a
> subset of boards in a multi-image build.

Same as PUTC_LL, right?

Actually the debug code is already wrong when we create multiple
images with different UARTs.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address
  2022-05-05  8:01   ` Alexander Shiyan
@ 2022-05-05  8:09     ` Ahmad Fatoum
  0 siblings, 0 replies; 6+ messages in thread
From: Ahmad Fatoum @ 2022-05-05  8:09 UTC (permalink / raw)
  To: Alexander Shiyan, Lucas Stach; +Cc: barebox

On 05.05.22 10:01, Alexander Shiyan wrote:
> чт, 5 мая 2022 г. в 10:55, Lucas Stach <l.stach@pengutronix.de>:
>> Am Donnerstag, dem 05.05.2022 um 10:36 +0300 schrieb Alexander Shiyan:
>>> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
>> Is this really a change in the right direction? The way it is currently
>> done seems to mix well with overall multi-image theme of Barebox. By
>> using a Kconfig for that, the setting will most likely be wrong for a
>> subset of boards in a multi-image build.
> 
> Same as PUTC_LL, right?
> 
> Actually the debug code is already wrong when we create multiple
> images with different UARTs.

There is pbl_set_putc(), which can be called after relocation
for use by the PBL console and is multi-image friendly.

> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address
  2022-05-05  7:36 [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address Alexander Shiyan
  2022-05-05  7:55 ` Lucas Stach
@ 2022-05-05  8:13 ` Sascha Hauer
  2022-05-05  9:42   ` Alexander Shiyan
  1 sibling, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2022-05-05  8:13 UTC (permalink / raw)
  To: Alexander Shiyan; +Cc: barebox

Hi Alexander,

On Thu, May 05, 2022 at 10:36:04AM +0300, Alexander Shiyan wrote:
> Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> ---
>  arch/arm/boards/afi-gf/lowlevel.c            |  2 +-
>  arch/arm/boards/beagle/lowlevel.c            |  2 +-
>  arch/arm/boards/beaglebone/lowlevel.c        |  2 +-
>  arch/arm/boards/myirtech-x335x/lowlevel.c    |  2 +-
>  arch/arm/boards/phytec-som-am335x/lowlevel.c |  2 +-
>  arch/arm/boards/vscom-baltos/lowlevel.c      |  2 +-
>  arch/arm/boards/wago-pfc-am35xx/lowlevel.c   |  2 +-
>  arch/arm/mach-omap/include/mach/debug_ll.h   | 43 ++++++++++++--------
>  8 files changed, 33 insertions(+), 24 deletions(-)
> 
> diff --git a/arch/arm/boards/afi-gf/lowlevel.c b/arch/arm/boards/afi-gf/lowlevel.c
> index de40f6c5af..9e86b29b2d 100644
> --- a/arch/arm/boards/afi-gf/lowlevel.c
> +++ b/arch/arm/boards/afi-gf/lowlevel.c
> @@ -230,7 +230,7 @@ static noinline int gf_sram_init(void)
>  
>  	am33xx_uart_soft_reset((void *)AM33XX_UART2_BASE);
>  	am33xx_enable_uart2_pin_mux();
> -	omap_uart_lowlevel_init((void *)AM33XX_UART2_BASE);
> +	omap_uart_lowlevel_init();

I don't think removing the base address from omap_uart_lowlevel_init()
is a step forward. CONFIG_DEBUG_LL is only one possible usecase for this
function, another one is for regular early console with pbl_set_putc().

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address
  2022-05-05  8:13 ` Sascha Hauer
@ 2022-05-05  9:42   ` Alexander Shiyan
  0 siblings, 0 replies; 6+ messages in thread
From: Alexander Shiyan @ 2022-05-05  9:42 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox

чт, 5 мая 2022 г. в 11:13, Sascha Hauer <sha@pengutronix.de>:
> Hi Alexander,
> On Thu, May 05, 2022 at 10:36:04AM +0300, Alexander Shiyan wrote:
> > Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
> > ---
> >  arch/arm/boards/afi-gf/lowlevel.c            |  2 +-
> >  arch/arm/boards/beagle/lowlevel.c            |  2 +-
> >  arch/arm/boards/beaglebone/lowlevel.c        |  2 +-
> >  arch/arm/boards/myirtech-x335x/lowlevel.c    |  2 +-
> >  arch/arm/boards/phytec-som-am335x/lowlevel.c |  2 +-
> >  arch/arm/boards/vscom-baltos/lowlevel.c      |  2 +-
> >  arch/arm/boards/wago-pfc-am35xx/lowlevel.c   |  2 +-
> >  arch/arm/mach-omap/include/mach/debug_ll.h   | 43 ++++++++++++--------
> >  8 files changed, 33 insertions(+), 24 deletions(-)
> >
> > diff --git a/arch/arm/boards/afi-gf/lowlevel.c b/arch/arm/boards/afi-gf/lowlevel.c
> > index de40f6c5af..9e86b29b2d 100644
> > --- a/arch/arm/boards/afi-gf/lowlevel.c
> > +++ b/arch/arm/boards/afi-gf/lowlevel.c
> > @@ -230,7 +230,7 @@ static noinline int gf_sram_init(void)
> >
> >       am33xx_uart_soft_reset((void *)AM33XX_UART2_BASE);
> >       am33xx_enable_uart2_pin_mux();
> > -     omap_uart_lowlevel_init((void *)AM33XX_UART2_BASE);
> > +     omap_uart_lowlevel_init();
>
> I don't think removing the base address from omap_uart_lowlevel_init()
> is a step forward. CONFIG_DEBUG_LL is only one possible usecase for this
> function, another one is for regular early console with pbl_set_putc().

Ok. Please take a look at the patch in the next message, is this how
it should be?

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2022-05-05  9:43 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-05  7:36 [PATCH] ARM: OMAP: debug_ll: Use Kconfig UART base address Alexander Shiyan
2022-05-05  7:55 ` Lucas Stach
2022-05-05  8:01   ` Alexander Shiyan
2022-05-05  8:09     ` Ahmad Fatoum
2022-05-05  8:13 ` Sascha Hauer
2022-05-05  9:42   ` Alexander Shiyan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox