From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sam Ravnborg <sam@ravnborg.org>,
Barebox List <barebox@lists.infradead.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Ladislav Michl <ladis@linux-mips.org>
Subject: Re: [PATCH v4 0/11] at91: Support PMC clock bindings
Date: Tue, 26 Feb 2019 10:03:45 +0100 [thread overview]
Message-ID: <c12c9d12-4ac8-a595-c138-1b1adfd54fbb@pengutronix.de> (raw)
In-Reply-To: <20190224185259.28458-1-sam@ravnborg.org>
On 24/2/19 19:52, Sam Ravnborg wrote:
> Hi all.
>
> The following patchset add supports for the PMC clk
> bindings for at91.
> The patchset was tested on:
> - at91sam9264ek - DT enabled
> - sama5d4-xplained - non DT
>
> Ladislav and Ahmad did some additional testing on the boards they have available.
>
> Please await feedback from Ahmad and Ladislav before applying to master.
I don't have the hardware to test these at the moment,
but from the changelog, I assume it should be okay.
>
>
> The patchset includes sama5d2.c which is not used today.
> I have a sama5d27-som1-ek board that I hope to find time to work
> with and then this will be needed.
>
> Patch was made on top of barebox master:
> 3c2dee2e7d62a32ba85f7bf94bb7abf5b4f09dab ("doc: bootchooser: add retry handling to algorithm description")
>
> On stray patch sneaked in - to kill a warning.
>
> The patchset triggers some checkpatch warnings:
> - SPDX, the barebox variant of checkpatch is missing support for these
> - Too long lines. As code is copied from the kernel I left them as-is
>
> Comments/review/testing very welcome!
> Note: I am at Embedded World Nürenberg for a few days, so no swift
> repsonses to feedback/comments.
>
> v4:
> - added dt-compat required by sama5d3 (Ahmad)
> - added syscon_regmap_lookup_by_compatible (Ahmad)
> - Rebased on master
> - Added SOC_SAMA5D2 - as it is used later
> Not used for now, but needed later
>
> v3:
> - fixed build breakage in sama5d4 and clk-h32mx
> - added Tested-by: Ladislav Michl <ladis@linux-mips.org> to relevant patches
> Not all, as only a subet was covered by the test
>
> v2:
> - Split up in smaller patches
> - Fix builds in various configs
> - Reworked Kconfig changes
> - Fix checkpatch warnings (mostly whitespace)
>
> v1:
> - Posted to mailing list as a WIP patch
>
> Sam
>
>
> Ahmad Fatoum (2):
> regmap: Implement syscon_regmap_lookup_by_compatible()
> clk: at91: add dt-compat to PMC bindings
>
> Sam Ravnborg (9):
> arm: at91: fix at91_configure_usart6 warning
> clocksource: Do not mix depends and select for ATMEL_PIT
> arm: at91: add SOC_SAMA5{D2,D3,D4}
> clk: at91: add at91sam9260
> clk: at91: add at91sam9rl
> clk: at91: add at91sam9x5
> clk: at91: add sama5d2
> clk: at91: add sama5d4
> clk: at91: update to PMC bindings
>
> arch/arm/mach-at91/Kconfig | 37 +-
> arch/arm/mach-at91/include/mach/board.h | 1 +
> drivers/clk/at91/Makefile | 6 +
> drivers/clk/at91/at91sam9260.c | 497 +++++++++++++++++
> drivers/clk/at91/at91sam9rl.c | 177 ++++++
> drivers/clk/at91/at91sam9x5.c | 315 +++++++++++
> drivers/clk/at91/clk-generated.c | 185 ++----
> drivers/clk/at91/clk-h32mx.c | 55 +-
> drivers/clk/at91/clk-main.c | 112 +---
> drivers/clk/at91/clk-master.c | 94 +---
> drivers/clk/at91/clk-peripheral.c | 82 +--
> drivers/clk/at91/clk-pll.c | 174 +-----
> drivers/clk/at91/clk-plldiv.c | 27 +-
> drivers/clk/at91/clk-programmable.c | 83 +--
> drivers/clk/at91/clk-slow.c | 33 +-
> drivers/clk/at91/clk-smd.c | 33 +-
> drivers/clk/at91/clk-system.c | 42 +-
> drivers/clk/at91/clk-usb.c | 94 +---
> drivers/clk/at91/clk-utmi.c | 100 ++--
> drivers/clk/at91/dt-compat.c | 961 ++++++++++++++++++++++++++++++++
> drivers/clk/at91/pmc.c | 248 +++++++++
> drivers/clk/at91/pmc.h | 169 ++++++
> drivers/clk/at91/sama5d2.c | 342 ++++++++++++
> drivers/clk/at91/sama5d4.c | 270 +++++++++
> drivers/clocksource/Kconfig | 1 -
> drivers/mfd/syscon.c | 14 +
> include/linux/clk.h | 7 +
> include/mfd/syscon.h | 5 +
> include/soc/at91/atmel-sfr.h | 34 ++
> 29 files changed, 3220 insertions(+), 978 deletions(-)
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2019-02-26 9:03 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-24 18:52 Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 01/11] arm: at91: fix at91_configure_usart6 warning Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 02/11] regmap: Implement syscon_regmap_lookup_by_compatible() Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 03/11] clocksource: Do not mix depends and select for ATMEL_PIT Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 04/11] arm: at91: add SOC_SAMA5{D2,D3,D4} Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 05/11] clk: at91: add at91sam9260 Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 06/11] clk: at91: add at91sam9rl Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 07/11] clk: at91: add at91sam9x5 Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 08/11] clk: at91: add sama5d2 Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 09/11] clk: at91: add sama5d4 Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 10/11] clk: at91: add dt-compat to PMC bindings Sam Ravnborg
2019-02-24 18:52 ` [PATCH v4 11/11] clk: at91: update " Sam Ravnborg
2019-02-24 21:40 ` [PATCH v4 0/11] at91: Support PMC clock bindings Ladislav Michl
2019-02-25 8:47 ` Sascha Hauer
2019-02-26 9:03 ` Ahmad Fatoum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c12c9d12-4ac8-a595-c138-1b1adfd54fbb@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=ladis@linux-mips.org \
--cc=s.hauer@pengutronix.de \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox