From: Oleksij Rempel <o.rempel@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>, barebox@lists.infradead.org
Cc: Peter Mamonov <pmamonov@gmail.com>
Subject: Re: [RFC 2/5] WIP: MIPS: implement dma mapping functions
Date: Mon, 13 Jan 2020 09:26:36 +0100 [thread overview]
Message-ID: <deb20a19-7177-5ab6-bf86-65ead7a9ae19@pengutronix.de> (raw)
In-Reply-To: <20200109072855.14154-3-antonynpavlov@gmail.com>
On 09.01.20 08:28, Antony Pavlov wrote:
> TODO: fix warnings
>
> arch/mips/include/asm/dma-mapping.h: In function ‘dma_free_coherent’:
> arch/mips/include/asm/dma-mapping.h:31:21: warning: passing argument 1 of ‘phys_to_virt’
> makes integer from pointer without a cast [-Wint-conversion]
> free(phys_to_virt(vaddr));
> ^~~~~
> In file included from include/common.h:33:0,
> from drivers/net/e1000/main.c:32:
> arch/mips/include/asm/io.h:40:21: note: expected ‘long unsigned int’ but argument is of type ‘void *’
> static inline void *phys_to_virt(unsigned long address)
> ^~~~~~~~~~~~
>
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
> ---
> arch/mips/include/asm/dma-mapping.h | 2 +-
> arch/mips/lib/dma-default.c | 22 ++++++++++++++++++++--
> 2 files changed, 21 insertions(+), 3 deletions(-)
>
> diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
> index c71a087038..5013e7b369 100644
> --- a/arch/mips/include/asm/dma-mapping.h
> +++ b/arch/mips/include/asm/dma-mapping.h
> @@ -28,7 +28,7 @@ static inline void dma_free_coherent(void *vaddr, dma_addr_t dma_handle,
> size_t size)
> {
> if (IS_ENABLED(CONFIG_MMU))
> - free((void *)CKSEG0ADDR(vaddr));
> + free(phys_to_virt(vaddr));
> else
> free(vaddr);
> }
> diff --git a/arch/mips/lib/dma-default.c b/arch/mips/lib/dma-default.c
> index fbe627c24c..40caf6f91b 100644
> --- a/arch/mips/lib/dma-default.c
> +++ b/arch/mips/lib/dma-default.c
> @@ -8,9 +8,11 @@
>
> #if defined(CONFIG_CPU_MIPS32) || \
> defined(CONFIG_CPU_MIPS64)
> -static inline void __dma_sync_mips(unsigned long addr, size_t size,
> +static inline void __dma_sync_mips(dma_addr_t _addr, size_t size,
> enum dma_data_direction direction)
> {
> + void *addr = phys_to_virt(_addr);
> +
> switch (direction) {
> case DMA_TO_DEVICE:
> dma_flush_range(addr, addr + size);
> @@ -29,7 +31,7 @@ static inline void __dma_sync_mips(unsigned long addr, size_t size,
> }
> }
> #else
> -static inline void __dma_sync_mips(void *addr, size_t size,
> +static inline void __dma_sync_mips(dma_addr_t addr, size_t size,
> enum dma_data_direction direction)
> {
> }
> @@ -46,3 +48,19 @@ void dma_sync_single_for_device(dma_addr_t address, size_t size,
> {
> __dma_sync_mips(address, size, dir);
> }
> +
> +dma_addr_t dma_map_single(struct device_d *dev, void *ptr, size_t size,
> + enum dma_data_direction dir)
> +{
> + unsigned long addr = virt_to_phys(ptr);
> +
> + dma_sync_single_for_device(addr, size, dir);
Hm.. i was thinking Hit Invalidate D instruction works with Virtual addresses. Are you
sure we need to use virt_to_phys() here?
> +
> + return addr;
> +}
> +
> +void dma_unmap_single(struct device_d *dev, dma_addr_t addr, size_t size,
> + enum dma_data_direction dir)
> +{
> + dma_sync_single_for_cpu(addr, size, dir);
> +}
>
Kind regards,
Oleksij Rempel
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-01-13 8:26 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-09 7:28 [RFC 0/5] " Antony Pavlov
2020-01-09 7:28 ` [RFC 1/5] WIP: MIPS: configure ebase according CONFIG_MMU Antony Pavlov
2020-01-13 6:48 ` Oleksij Rempel
2020-01-09 7:28 ` [RFC 2/5] WIP: MIPS: implement dma mapping functions Antony Pavlov
2020-01-13 8:26 ` Oleksij Rempel [this message]
2020-01-14 21:03 ` Antony Pavlov
2020-01-09 7:28 ` [RFC 3/5] net: e1000: make it work on MIPS Antony Pavlov
2020-01-13 7:29 ` Oleksij Rempel
2020-01-13 19:06 ` Lucas Stach
2020-01-09 7:28 ` [RFC 4/5] net: rtl8169: make it work on big-endian system Antony Pavlov
2020-01-13 7:21 ` Oleksij Rempel
2020-02-04 14:03 ` Oleksij Rempel
2020-02-09 6:30 ` Antony Pavlov
2020-02-09 8:17 ` Oleksij Rempel
2020-02-28 5:38 ` Antony Pavlov
2020-01-09 7:28 ` [RFC 5/5] MIPS: qemu-malta_defconfig: enable e1000 network driver Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=deb20a19-7177-5ab6-bf86-65ead7a9ae19@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=pmamonov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox