From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>,
Barebox List <barebox@lists.infradead.org>
Subject: Re: [PATCH v4 09/16] crypto: rsa: encapsulate rsa keys in public keys struct
Date: Fri, 27 Sep 2024 10:02:08 +0200 [thread overview]
Message-ID: <e5fabaa7-10e7-435b-b2f4-380fdca30cdf@pengutronix.de> (raw)
In-Reply-To: <20240913075924.1652866-10-s.hauer@pengutronix.de>
On 13.09.24 09:59, Sascha Hauer wrote:
> This encapsulates struct rsa_public_key into a struct public_key. So far
> RSA keys are the only supported key type. With adding ECDSA keys we need
> a container struct so that we can add ECDSA keys using the same
> mechanisms.
>
> Also we rename CONFIG_CRYPTO_RSA_KEY to CONFIG_CRYPTO_PUBLIC_KEYS and
> CONFIG_CRYPTO_RSA_BUILTIN_KEYS to CONFIG_CRYPTO_BUILTIN_KEYS as these
> variables will be used for all types of keys, not only RSA keys.
>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
But two comments below.
> diff --git a/crypto/public-keys.c b/crypto/public-keys.c
> new file mode 100644
> index 0000000000..a3ef3bafc8
> --- /dev/null
> +++ b/crypto/public-keys.c
> @@ -0,0 +1,39 @@
add a pr_fmt?
> +#include <common.h>
> +#include <crypto/public_key.h>
> +#include <rsa.h>
> +
> +extern const struct public_key * const __public_keys_start;
> +extern const struct public_key * const __public_keys_end;
> +
> +static int init_public_keys(void)
> +{
> + const struct public_key * const *iter;
> + int ret;
> +
> + for (iter = &__public_keys_start; iter != &__public_keys_end; iter++) {
> + struct rsa_public_key *rsa_key;
> +
> + switch ((*iter)->type) {
> + case PUBLIC_KEY_TYPE_RSA:
> + rsa_key = rsa_key_dup((*iter)->rsa);
> + if (!rsa_key)
> + continue;
> +
> + ret = rsa_key_add(rsa_key);
> + if (ret)
> + pr_err("Cannot add rsa key: %pe\n", ERR_PTR(ret));
> + break;
> + default:
> + pr_err("Ignoring unknown key type %u\n", (*iter)->type);
> + }
> +
> + }
> +
> + return 0;
> +}
> +
> +device_initcall(init_public_keys);
> +
> -extern const struct rsa_public_key * const __rsa_keys_start;
> -extern const struct rsa_public_key * const __rsa_keys_end;
I know you are just moving these around, but defining
these with [] is way less confusing IMO.
Thanks,
Ahmad
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2024-09-27 8:03 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-13 7:59 [PATCH v4 00/16] Add ECDSA support for FIT image verification Sascha Hauer
2024-09-13 7:59 ` [PATCH v4 01/16] keytoc: remove ECDSA dts support Sascha Hauer
2024-09-25 8:53 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 02/16] keytoc: fail in case gen_key() fails Sascha Hauer
2024-09-25 8:53 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 03/16] keytoc: fix ECDSA endianess problems Sascha Hauer
2024-09-27 8:11 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 04/16] keytoc: remove duplicate __ENV__ check Sascha Hauer
2024-09-27 6:59 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 05/16] crypto: Makefile: make simpler Sascha Hauer
2024-09-27 7:01 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 06/16] crypto/Makefile: Drop unnecessary dependencies Sascha Hauer
2024-09-27 7:03 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 07/16] keytoc: make key name hint optional Sascha Hauer
2024-09-27 8:18 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 08/16] crypto: rsa: include key name hint into CONFIG_CRYPTO_RSA_KEY Sascha Hauer
2024-09-27 7:55 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 09/16] crypto: rsa: encapsulate rsa keys in public keys struct Sascha Hauer
2024-09-27 8:02 ` Ahmad Fatoum [this message]
2024-09-27 11:11 ` Sascha Hauer
2024-09-13 7:59 ` [PATCH v4 10/16] crypto: add public_key functions Sascha Hauer
2024-09-27 8:20 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 11/16] crypto: builtin_keys: Allow to specify multiple keys in CONFIG_CRYPTO_PUBLIC_KEYS Sascha Hauer
2024-09-25 8:22 ` Sascha Hauer
2024-09-13 7:59 ` [PATCH v4 12/16] crypto: public-keys: use array of public_keys Sascha Hauer
2024-09-13 7:59 ` [PATCH v4 13/16] crypto: rsa: create static inline wrapper for rsa_verify() Sascha Hauer
2024-09-27 8:09 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 14/16] Add elliptic curve cryptography (ECC) helper functions Sascha Hauer
2024-09-13 7:59 ` [PATCH v4 15/16] crypto: add ECDSA support Sascha Hauer
2024-09-27 8:07 ` Ahmad Fatoum
2024-09-13 7:59 ` [PATCH v4 16/16] crypto: make RSA a visible option Sascha Hauer
2024-09-27 11:23 ` [PATCH v4 00/16] Add ECDSA support for FIT image verification Sascha Hauer
2024-09-27 11:23 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e5fabaa7-10e7-435b-b2f4-380fdca30cdf@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox