* [PATCH v2] commands: mmc_extcsd: Add support to write multibyte registers
@ 2018-06-07 8:25 Teresa Remmet
2018-06-07 8:35 ` Bastian Stender
2018-06-08 6:02 ` Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Teresa Remmet @ 2018-06-07 8:25 UTC (permalink / raw)
To: barebox
It has been possible to write only the first byte of a multibyte register.
Updated the command to write the complete value of a multibyte register at once.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
---
Changes in v2:
- Readded removed static from fuction
commands/mmc_extcsd.c | 44 +++++++++++++++++++++++++++-----------------
1 file changed, 27 insertions(+), 17 deletions(-)
diff --git a/commands/mmc_extcsd.c b/commands/mmc_extcsd.c
index acd23a466bcb..82e0600eaf67 100644
--- a/commands/mmc_extcsd.c
+++ b/commands/mmc_extcsd.c
@@ -2306,10 +2306,8 @@ static int request_write_operation(void)
return 0;
}
-static void write_field(struct mci *mci, u8 *reg, u16 index, u8 value,
- int always_write)
+static int request_one_time_programmable(u16 index)
{
-
switch (index) {
case EXT_CSD_BOOT_CONFIG_PROT:
case EXT_CSD_BOOT_WP:
@@ -2349,18 +2347,15 @@ static void write_field(struct mci *mci, u8 *reg, u16 index, u8 value,
case 52:
case EXT_CSD_BARRIER_CTRL:
case EXT_CSD_SECURE_REMOVAL_TYPE:
- if (!always_write)
- if (request_write_operation() == 0) {
- printf("Abort write operation!\n");
- goto out;
- }
- break;
+ if (request_write_operation() == 0) {
+ printf("Abort write operation!\n");
+ return 1;
+ } else {
+ return 0;
+ }
}
- mci_switch(mci, index, value);
-
-out:
- return;
+ return 0;
}
static int do_mmc_extcsd(int argc, char *argv[])
@@ -2430,11 +2425,26 @@ static int do_mmc_extcsd(int argc, char *argv[])
if (!print_field(dst, index)) {
printf("No field with this index found. Abort write operation!\n");
} else {
- write_field(mci, dst, index, value, always_write);
+ struct extcsd_reg *ext;
+ int i;
+ int val = 0;
+
+ if (!always_write) {
+ retval = request_one_time_programmable(index);
+ if (retval)
+ goto error_with_mem;
+ }
+
+ ext = &extcsd[index];
+ for (i = 0; i < ext->width; i++) {
+ val = (value >> (i * 8)) & 0xFF;
+
+ mci_switch(mci, index + i, val);
+ retval = mci_send_ext_csd(mci, dst);
+ if (retval != 0)
+ goto error_with_mem;
+ }
printf("\nValue written!\n\n");
- retval = mci_send_ext_csd(mci, dst);
- if (retval != 0)
- goto error_with_mem;
print_field(dst, index);
}
else
--
2.7.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] commands: mmc_extcsd: Add support to write multibyte registers
2018-06-07 8:25 [PATCH v2] commands: mmc_extcsd: Add support to write multibyte registers Teresa Remmet
@ 2018-06-07 8:35 ` Bastian Stender
2018-06-08 6:02 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Bastian Stender @ 2018-06-07 8:35 UTC (permalink / raw)
To: Teresa Remmet; +Cc: barebox
On 06/07/2018 10:25 AM, Teresa Remmet wrote:
> It has been possible to write only the first byte of a multibyte register.
> Updated the command to write the complete value of a multibyte register at once.
>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Reviewed-by: Bastian Stender <bst@pengutronix.de>
--
Pengutronix e.K.
Industrial Linux Solutions
http://www.pengutronix.de/
Peiner Str. 6-8, 31137 Hildesheim, Germany
Amtsgericht Hildesheim, HRA 2686
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH v2] commands: mmc_extcsd: Add support to write multibyte registers
2018-06-07 8:25 [PATCH v2] commands: mmc_extcsd: Add support to write multibyte registers Teresa Remmet
2018-06-07 8:35 ` Bastian Stender
@ 2018-06-08 6:02 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2018-06-08 6:02 UTC (permalink / raw)
To: Teresa Remmet; +Cc: barebox
On Thu, Jun 07, 2018 at 10:25:10AM +0200, Teresa Remmet wrote:
> It has been possible to write only the first byte of a multibyte register.
> Updated the command to write the complete value of a multibyte register at once.
>
> Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
> ---
> Changes in v2:
> - Readded removed static from fuction
Applied, thanks
Sascha
>
> commands/mmc_extcsd.c | 44 +++++++++++++++++++++++++++-----------------
> 1 file changed, 27 insertions(+), 17 deletions(-)
>
> diff --git a/commands/mmc_extcsd.c b/commands/mmc_extcsd.c
> index acd23a466bcb..82e0600eaf67 100644
> --- a/commands/mmc_extcsd.c
> +++ b/commands/mmc_extcsd.c
> @@ -2306,10 +2306,8 @@ static int request_write_operation(void)
> return 0;
> }
>
> -static void write_field(struct mci *mci, u8 *reg, u16 index, u8 value,
> - int always_write)
> +static int request_one_time_programmable(u16 index)
> {
> -
> switch (index) {
> case EXT_CSD_BOOT_CONFIG_PROT:
> case EXT_CSD_BOOT_WP:
> @@ -2349,18 +2347,15 @@ static void write_field(struct mci *mci, u8 *reg, u16 index, u8 value,
> case 52:
> case EXT_CSD_BARRIER_CTRL:
> case EXT_CSD_SECURE_REMOVAL_TYPE:
> - if (!always_write)
> - if (request_write_operation() == 0) {
> - printf("Abort write operation!\n");
> - goto out;
> - }
> - break;
> + if (request_write_operation() == 0) {
> + printf("Abort write operation!\n");
> + return 1;
> + } else {
> + return 0;
> + }
> }
>
> - mci_switch(mci, index, value);
> -
> -out:
> - return;
> + return 0;
> }
>
> static int do_mmc_extcsd(int argc, char *argv[])
> @@ -2430,11 +2425,26 @@ static int do_mmc_extcsd(int argc, char *argv[])
> if (!print_field(dst, index)) {
> printf("No field with this index found. Abort write operation!\n");
> } else {
> - write_field(mci, dst, index, value, always_write);
> + struct extcsd_reg *ext;
> + int i;
> + int val = 0;
> +
> + if (!always_write) {
> + retval = request_one_time_programmable(index);
> + if (retval)
> + goto error_with_mem;
> + }
> +
> + ext = &extcsd[index];
> + for (i = 0; i < ext->width; i++) {
> + val = (value >> (i * 8)) & 0xFF;
> +
> + mci_switch(mci, index + i, val);
> + retval = mci_send_ext_csd(mci, dst);
> + if (retval != 0)
> + goto error_with_mem;
> + }
> printf("\nValue written!\n\n");
> - retval = mci_send_ext_csd(mci, dst);
> - if (retval != 0)
> - goto error_with_mem;
> print_field(dst, index);
> }
> else
> --
> 2.7.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2018-06-08 6:02 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-07 8:25 [PATCH v2] commands: mmc_extcsd: Add support to write multibyte registers Teresa Remmet
2018-06-07 8:35 ` Bastian Stender
2018-06-08 6:02 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox