From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Antony Pavlov <antonynpavlov@gmail.com>, barebox@lists.infradead.org
Subject: Re: [PATCH 3/9] serial: add litex UART driver
Date: Wed, 5 May 2021 12:32:04 +0200 [thread overview]
Message-ID: <f5602ba7-64cb-7135-7c76-eb2afa6c3d52@pengutronix.de> (raw)
In-Reply-To: <20210505100900.88141-4-antonynpavlov@gmail.com>
On 05.05.21 12:08, Antony Pavlov wrote:
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
> drivers/serial/Makefile | 1 +
> drivers/serial/serial_litex.c | 96 +++++++++++++++++++++++++++++++++++
> 2 files changed, 97 insertions(+)
>
> diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
> index 7ff41cd5c7..95c3387d3e 100644
> --- a/drivers/serial/Makefile
> +++ b/drivers/serial/Makefile
> @@ -23,3 +23,4 @@ obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO) += efi-stdio.o
> obj-$(CONFIG_DRIVER_SERIAL_DIGIC) += serial_digic.o
> obj-$(CONFIG_DRIVER_SERIAL_LPUART) += serial_lpuart.o
> obj-$(CONFIG_VIRTIO_CONSOLE) += virtio_console.o
> +obj-$(CONFIG_MACH_LITEX) += serial_litex.o
> diff --git a/drivers/serial/serial_litex.c b/drivers/serial/serial_litex.c
> new file mode 100644
> index 0000000000..dec3d99fd0
> --- /dev/null
> +++ b/drivers/serial/serial_litex.c
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.
> +/*
> + * Copyright (C) 2019 Antony Pavlov <antonynpavlov@gmail.com>
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <malloc.h>
That header is unused, isn't it?
> +#include <io.h>
> +
> +#include <mach/debug_ll.h>
This seems unused as well.
> +static inline uint32_t litex_serial_readb(struct console_device *cdev,
> + uint32_t offset)
> +{
> + void __iomem *base = cdev->dev->priv;
> +
> + return readb(base + offset);
> +}
> +
> +static inline void litex_serial_writeb(struct console_device *cdev,
> + uint32_t value, uint32_t offset)
> +{
> + void __iomem *base = cdev->dev->priv;
> +
> + writeb(value, base + offset);
> +}
> +
> +static void litex_serial_putc(struct console_device *cdev, char c)
> +{
> + while (litex_serial_readb(cdev, UART_TXFULL))
> + ;
> +
> + litex_serial_writeb(cdev, c, UART_RXTX);
> +}
> +
> +static int litex_serial_getc(struct console_device *cdev)
> +{
> + int c;
> +
> + while (litex_serial_readb(cdev, UART_RXEMPTY))
> + ;
> +
> + c = litex_serial_readb(cdev, UART_RXTX);
> +
> + /* refresh UART_RXEMPTY by writing UART_EV_RX to UART_EV_PENDING */
> + litex_serial_writeb(cdev, UART_EV_RX, UART_EV_PENDING);
> +
> + return c;
> +}
> +
> +static int litex_serial_tstc(struct console_device *cdev)
> +{
> + if (litex_serial_readb(cdev, UART_RXEMPTY)) {
> + return 0;
> + }
> +
> + return 1;
return directly?
> +}
> +
> +static int litex_serial_probe(struct device_d *dev)
> +{
> + struct resource *iores;
> + struct console_device *cdev;
> +
> + cdev = xzalloc(sizeof(struct console_device));
> + iores = dev_request_mem_resource(dev, 0);
> + if (IS_ERR(iores))
> + return PTR_ERR(iores);
blank line.
> + dev->priv = IOMEM(iores->start);
> + cdev->dev = dev;
> + cdev->tstc = &litex_serial_tstc;
> + cdev->putc = &litex_serial_putc;
> + cdev->getc = &litex_serial_getc;
> + cdev->setbrg = NULL;
> +
> + console_register(cdev);
> +
> + return 0;
> +}
> +
> +static __maybe_unused struct of_device_id litex_serial_dt_ids[] = {
> + {
> + .compatible = "litex,uart",
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +static struct driver_d litex_serial_driver = {
> + .name = "litex-uart",
> + .probe = litex_serial_probe,
> + .of_compatible = DRV_OF_COMPAT(litex_serial_dt_ids),
> +};
> +console_platform_driver(litex_serial_driver);
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-05-05 10:33 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-05 10:08 [PATCH 0/9] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
2021-05-05 10:08 ` [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code Antony Pavlov
2021-05-05 10:27 ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-05 10:28 ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 3/9] serial: add litex UART driver Antony Pavlov
2021-05-05 10:32 ` Ahmad Fatoum [this message]
2021-05-05 10:08 ` [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-05 10:35 ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 5/9] spi: add litex spiflash driver Antony Pavlov
2021-05-05 10:39 ` Ahmad Fatoum
2021-05-05 15:10 ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 6/9] net: add LiteEth driver Antony Pavlov
2021-05-06 10:10 ` Roland Hieber
2021-05-06 11:33 ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 7/9] RISC-V: add initial LiteX SoC support Antony Pavlov
2021-05-05 10:16 ` Ahmad Fatoum
2021-05-05 10:45 ` Jan Lübbe
2021-05-05 15:23 ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 8/9] RISC-V: add litex-linux board support Antony Pavlov
2021-05-05 10:19 ` Ahmad Fatoum
2021-05-05 10:36 ` Antony Pavlov
2021-05-05 10:09 ` [PATCH 9/9] RISC-V: add litex_linux_defconfig Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f5602ba7-64cb-7135-7c76-eb2afa6c3d52@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox