* [PATCH] MX21ADS: Support LCD panel
@ 2010-04-01 16:06 Ivo Clarysse
0 siblings, 0 replies; only message in thread
From: Ivo Clarysse @ 2010-04-01 16:06 UTC (permalink / raw)
To: barebox, Sascha Hauer
This patch enabled support for the Sharp QVGA LCD panel of the MX21ADS board.
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
---
diff --git a/board/imx21ads/imx21ads.c b/board/imx21ads/imx21ads.c
index bc638e3..9eba19a 100644
--- a/board/imx21ads/imx21ads.c
+++ b/board/imx21ads/imx21ads.c
@@ -34,6 +34,10 @@
#include <fcntl.h>
#include <asm/mach-types.h>
#include <mach/imx-nand.h>
+#include <mach/imxfb.h>
+
+#define MX21ADS_IO_REG 0xCC800000
+#define MX21ADS_IO_LCDON (1 << 9)
static struct device_d cfi_dev = {
.name = "cfi_flash",
@@ -70,6 +74,45 @@ static struct device_d cs8900_dev = {
// IRQ is connected to UART3_RTS
};
+/* Sharp LQ035Q7DB02 QVGA display */
+static struct imx_fb_videomode imx_fb_modedata = {
+ .mode = {
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 188679,
+ .left_margin = 6,
+ .right_margin = 16,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ .hsync_len = 2,
+ .vsync_len = 1,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+ .pcr = 0xfb108bc7,
+ .bpp = 16,
+};
+
+static struct imx_fb_platform_data imx_fb_data = {
+ .mode = &imx_fb_modedata,
+ .cmap_greyscale = 0,
+ .cmap_inverse = 0,
+ .cmap_static = 0,
+ .pwmr = 0x00a903ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
+};
+
+static struct device_d imxfb_dev = {
+ .name = "imxfb",
+ .map_base = 0x10021000,
+ .size = 0x1000,
+ .platform_data = &imx_fb_data,
+};
+
static int imx21ads_timing_init(void)
{
u32 temp;
@@ -111,6 +154,33 @@ static int mx21ads_devices_init(void)
{
int i;
unsigned int mode[] = {
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
PE12_PF_UART1_TXD,
PE13_PF_UART1_RXD,
PE14_PF_UART1_CTS,
@@ -125,6 +195,7 @@ static int mx21ads_devices_init(void)
register_device(&sdram_dev);
register_device(&nand_dev);
register_device(&cs8900_dev);
+ register_device(&imxfb_dev);
armlinux_add_dram(&sdram_dev);
armlinux_set_bootparams((void *)0xc0000100);
@@ -135,6 +206,18 @@ static int mx21ads_devices_init(void)
device_initcall(mx21ads_devices_init);
+static int mx21ads_enable_display(void)
+{
+ u16 tmp;
+
+ tmp = readw(MX21ADS_IO_REG);
+ tmp |= MX21ADS_IO_LCDON;
+ writew(tmp, MX21ADS_IO_REG);
+ return 0;
+}
+
+late_initcall(mx21ads_enable_display);
+
static struct device_d mx21ads_serial_device = {
.name = "imx_serial",
.map_base = IMX_UART1_BASE,
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2010-04-01 16:07 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-04-01 16:06 [PATCH] MX21ADS: Support LCD panel Ivo Clarysse
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox