From: Roland Hieber <r.hieber@pengutronix.de>
To: Rouven Czerwinski <rouven@czerwinskis.de>
Cc: distrokit@pengutronix.de,
Rouven Czerwinski <r.czerwinski@pengutronix.de>
Subject: Re: [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0
Date: Wed, 5 Dec 2018 14:15:17 +0100 [thread overview]
Message-ID: <20181205131517.642rnuvsq3sxqzr6@pengutronix.de> (raw)
In-Reply-To: <20181205075542.7646-1-rouven@czerwinskis.de>
On Wed, Dec 05, 2018 at 08:55:42AM +0100, Rouven Czerwinski wrote:
> Drop the beaglebone patch, it will be resurrected in a distrokit-deployment
> layer.
> We also add the patch series for the rpi3 to barebox, it can be dropped
> in the next release.
>
> Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> ---
> .../platform-v7a/barebox-am335x-mlo.config | 22 +-
> configs/platform-v7a/barebox-am335x.config | 24 +-
> configs/platform-v7a/barebox-mx6.config | 32 +-
> configs/platform-v7a/barebox-rpi2.config | 23 +-
> .../barebox-rpi3-defaultenv/boot/9p | 10 +
> .../barebox-rpi3-defaultenv/init/bootsource | 13 +
> .../nv/linux.bootargs.loglevel | 1 +
> configs/platform-v7a/barebox-rpi3.config | 600 ++++++++++++++++++
> configs/platform-v7a/barebox-vexpress.config | 23 +-
> ...ne-add-state-entry-for-mmc0-and-mmc1.patch | 35 -
> ...ease-pengutronix-multi_v7-20180515-1.patch | 22 -
> .../patches/barebox-2018.05.0/series | 15 -
> ...ort-opcode-helpers-from-Linux-kernel.patch | 299 +++++++++
> ...tch-from-HYP-to-SVC-mode-if-required.patch | 88 +++
> ...-monitor-code-to-be-built-without-PS.patch | 37 ++
> ...-add-file-for-HYP-mode-related-setup.patch | 193 ++++++
> ...-install-secure-monitor-when-entered.patch | 30 +
> ...tarting-kernel-in-HYP-mode-when-ente.patch | 31 +
> ...HYP-vectors-at-PBL-and-Barebox-entry.patch | 105 +++
> ...sion-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch | 41 ++
> ...9-ARM-rpi-add-raspberry-pi-3-support.patch | 141 ++++
> .../0010-ARM-rpi-autosize-malloc-area.patch | 25 +
> ...RM-imx-add-support-for-Udoo-Neo-full.patch | 26 +-
> ...lease-pengutronix_multiv7-20181122-1.patch | 22 +
> .../patches/barebox-2018.11.0/series | 24 +
> configs/platform-v7a/platformconfig | 2 +
> .../rules/barebox-am335x-mlo.make | 4 +-
> .../platform-v7a/rules/barebox-am335x.make | 4 +-
> configs/platform-v7a/rules/barebox-mx6.make | 4 +-
> configs/platform-v7a/rules/barebox-rpi2.make | 4 +-
> configs/platform-v7a/rules/barebox-rpi3.make | 104 +++
Oh, RPi 3 now has its own barebox? Previously we used barebox-rpi2 for
both versions, what is the reason to change that?
- Roland
> .../platform-v7a/rules/barebox-vexpress.make | 4 +-
> 32 files changed, 1905 insertions(+), 103 deletions(-)
> create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> create mode 100644 configs/platform-v7a/barebox-rpi3.config
> delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/series
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> rename configs/platform-v7a/patches/{barebox-2018.05.0 => barebox-2018.11.0}/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch (93%)
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/series
> create mode 100644 configs/platform-v7a/rules/barebox-rpi3.make
>
> diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
> index 6cebecd..90adc2c 100644
> --- a/configs/platform-v7a/barebox-am335x-mlo.config
> +++ b/configs/platform-v7a/barebox-am335x-mlo.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> @@ -185,6 +185,7 @@ CONFIG_OF_GPIO=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
> @@ -337,6 +338,15 @@ CONFIG_BUS_OMAP_GPMC=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> # CONFIG_FS_CRAMFS is not set
> # CONFIG_FS_EXT4 is not set
> CONFIG_FS_RAMFS=y
> @@ -398,3 +408,13 @@ CONFIG_XYMODEM=y
> CONFIG_CRC16=y
> # CONFIG_DIGEST is not set
> # CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
> index 0c78012..0c3d7e5 100644
> --- a/configs/platform-v7a/barebox-am335x.config
> +++ b/configs/platform-v7a/barebox-am335x.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -408,6 +408,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
> @@ -436,6 +437,7 @@ CONFIG_DRIVER_NET_CPSW=y
> #
> # CONFIG_AR8327N_PHY is not set
> # CONFIG_AT803X_PHY is not set
> +# CONFIG_DAVICOM_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> @@ -587,6 +589,7 @@ CONFIG_LED_GPIO_OF=y
> # CONFIG_LED_GPIO_RGB is not set
> # CONFIG_LED_GPIO_BICOLOR is not set
> CONFIG_LED_TRIGGERS=y
> +# CONFIG_LED_PCA955X is not set
>
> #
> # EEPROM support
> @@ -649,6 +652,15 @@ CONFIG_BUS_OMAP_GPMC=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -732,3 +744,13 @@ CONFIG_DIGEST_HMAC_GENERIC=y
> # CONFIG_DIGEST_SHA256_ARM is not set
> CONFIG_CRYPTO_RSA=y
> CONFIG_CRYPTO_KEYSTORE=y
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
> index 980b97b..536cbfe 100644
> --- a/configs/platform-v7a/barebox-mx6.config
> +++ b/configs/platform-v7a/barebox-mx6.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -94,13 +94,17 @@ CONFIG_MACH_UDOO_NEO=y
> # CONFIG_MACH_VARISCITE_MX6 is not set
> # CONFIG_MACH_GW_VENTANA is not set
> # CONFIG_MACH_CM_FX6 is not set
> +# CONFIG_MACH_ADVANTECH_ROM_742X is not set
> # CONFIG_MACH_WARP7 is not set
> # CONFIG_MACH_VF610_TWR is not set
> +# CONFIG_MACH_ZII_RDU1 is not set
> # CONFIG_MACH_ZII_RDU2 is not set
> # CONFIG_MACH_ZII_VF610_DEV is not set
> +# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
> # CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
> # CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
> # CONFIG_MACH_NXP_IMX6ULL_EVK is not set
> +# CONFIG_MACH_NXP_IMX8MQ_EVK is not set
>
> #
> # Board specific settings
> @@ -111,10 +115,7 @@ CONFIG_MACH_UDOO_NEO=y
> #
> CONFIG_IMX_IIM=y
> CONFIG_IMX_IIM_FUSE_BLOW=y
> -CONFIG_IMX_OCOTP=y
> -# CONFIG_IMX_OCOTP_WRITE is not set
> # CONFIG_HABV4 is not set
> -# CONFIG_ARCH_IMX_USBLOADER is not set
> CONFIG_ARM_ASM_UNIFIED=y
> CONFIG_AEABI=y
> CONFIG_THUMB2_BAREBOX=y
> @@ -464,6 +465,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_DRIVER_SERIAL_IMX=y
> # CONFIG_DRIVER_SERIAL_NS16550 is not set
> @@ -493,6 +495,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
> #
> # CONFIG_AR8327N_PHY is not set
> CONFIG_AT803X_PHY=y
> +# CONFIG_DAVICOM_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> CONFIG_MICREL_PHY=y
> @@ -681,6 +684,7 @@ CONFIG_LED_GPIO_OF=y
> # CONFIG_LED_GPIO_RGB is not set
> # CONFIG_LED_GPIO_BICOLOR is not set
> CONFIG_LED_TRIGGERS=y
> +# CONFIG_LED_PCA955X is not set
>
> #
> # EEPROM support
> @@ -762,6 +766,15 @@ CONFIG_USB_NOP_XCEIV=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -854,3 +867,14 @@ CONFIG_DIGEST_HMAC_GENERIC=y
> # CONFIG_DIGEST_SHA1_ARM is not set
> # CONFIG_DIGEST_SHA256_ARM is not set
> CONFIG_CRYPTO_KEYSTORE=y
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> +# CONFIG_ARCH_IMX_USBLOADER is not set
> diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
> index 74c52e9..0e2622f 100644
> --- a/configs/platform-v7a/barebox-rpi2.config
> +++ b/configs/platform-v7a/barebox-rpi2.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -54,6 +54,7 @@ CONFIG_MACH_RPI_COMMON=y
> #
> # CONFIG_MACH_RPI is not set
> CONFIG_MACH_RPI2=y
> +# CONFIG_MACH_RPI3 is not set
> CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_AEABI=y
> # CONFIG_THUMB2_BAREBOX is not set
> @@ -369,6 +370,7 @@ CONFIG_ARM_AMBA=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_SERIAL_AMBA_PL011=y
> # CONFIG_DRIVER_SERIAL_NS16550 is not set
> @@ -499,6 +501,15 @@ CONFIG_REGULATOR_BCM283X=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -575,3 +586,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
> # CONFIG_DIGEST_SHA1_ARM is not set
> # CONFIG_DIGEST_SHA256_ARM is not set
> # CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> new file mode 100644
> index 0000000..264ffec
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +
> +addpart /dev/nor0 "8M@32M(kernel)"
> +addpart /dev/nor0 "512k@40M(dtb)"
> +global.bootm.image="/dev/nor0.kernel"
> +global.bootm.oftree="/dev/nor0.dtb"
> +
> +global linux.bootargs.base="console=ttyAMA0,115200 loglevel=5 ptxdist-devel"
> +
> +global linux.bootargs.root="root=/dev/root rootfstype=9p rootflags=trans=virtio"
> \ No newline at end of file
> diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> new file mode 100644
> index 0000000..4de7163
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +if [ -n "$nv.boot.default" ]; then
> + exit
> +fi
> +
> +if [ $bootsource = mmc ]; then
> + global.boot.default="bootchooser net"
> +elif [ $bootsource = net ]; then
> + global.boot.default="net bootchooser"
> +else
> + global.boot.default="disk0.1 net"
> +fi
> diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> new file mode 100644
> index 0000000..705752c
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> @@ -0,0 +1 @@
> +loglevel=5 systemd.log_level=warning systemd.show_status=auto
> diff --git a/configs/platform-v7a/barebox-rpi3.config b/configs/platform-v7a/barebox-rpi3.config
> new file mode 100644
> index 0000000..0336bdf
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3.config
> @@ -0,0 +1,600 @@
> +#
> +# Automatically generated file; DO NOT EDIT.
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> +#
> +CONFIG_ARM=y
> +CONFIG_ARM_LINUX=y
> +CONFIG_TEXT_BASE=0x0
> +
> +#
> +# System Type
> +#
> +# CONFIG_ARCH_AT91 is not set
> +CONFIG_ARCH_BCM283X=y
> +# CONFIG_ARCH_CLPS711X is not set
> +# CONFIG_ARCH_DAVINCI is not set
> +# CONFIG_ARCH_DIGIC is not set
> +# CONFIG_ARCH_EP93XX is not set
> +# CONFIG_ARCH_HIGHBANK is not set
> +# CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_MVEBU is not set
> +# CONFIG_ARCH_MXS is not set
> +# CONFIG_ARCH_NETX is not set
> +# CONFIG_ARCH_NOMADIK is not set
> +# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_PXA is not set
> +# CONFIG_ARCH_ROCKCHIP is not set
> +# CONFIG_ARCH_SOCFPGA is not set
> +# CONFIG_ARCH_S3C24xx is not set
> +# CONFIG_ARCH_S5PCxx is not set
> +# CONFIG_ARCH_S3C64xx is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +# CONFIG_ARCH_VEXPRESS is not set
> +# CONFIG_ARCH_TEGRA is not set
> +# CONFIG_ARCH_UEMD is not set
> +# CONFIG_ARCH_ZYNQ is not set
> +# CONFIG_ARCH_QEMU is not set
> +
> +#
> +# Processor Type
> +#
> +CONFIG_CPU_32=y
> +CONFIG_CPU_V7=y
> +CONFIG_CPU_32v7=y
> +
> +#
> +# processor features
> +#
> +# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> +CONFIG_ARCH_TEXT_BASE=0x0
> +CONFIG_MACH_RPI_COMMON=y
> +
> +#
> +# select Broadcom BCM283X boards to be built
> +#
> +# CONFIG_MACH_RPI is not set
> +# CONFIG_MACH_RPI2 is not set
> +CONFIG_MACH_RPI3=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> +CONFIG_AEABI=y
> +# CONFIG_THUMB2_BAREBOX is not set
> +# CONFIG_ARM_BOARD_APPEND_ATAG is not set
> +
> +#
> +# ARM specific settings
> +#
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_ARM_EXCEPTIONS=y
> +CONFIG_ARM_UNWIND=y
> +# CONFIG_ARM_SEMIHOSTING is not set
> +CONFIG_ARM_SMCCC=y
> +CONFIG_ARM_SECURE_MONITOR=y
> +# CONFIG_ARM_PSCI is not set
> +CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
> +CONFIG_GREGORIAN_CALENDER=y
> +CONFIG_HAS_KALLSYMS=y
> +CONFIG_HAS_MODULES=y
> +CONFIG_HAS_CACHE=y
> +CONFIG_HAS_DMA=y
> +CONFIG_GENERIC_GPIO=y
> +CONFIG_BLOCK=y
> +CONFIG_BLOCK_WRITE=y
> +CONFIG_FILETYPE=y
> +CONFIG_BINFMT=y
> +CONFIG_UIMAGE=y
> +CONFIG_STDDEV=y
> +CONFIG_BOOT=y
> +
> +#
> +# General Settings
> +#
> +CONFIG_LOCALVERSION=""
> +CONFIG_LOCALVERSION_AUTO=y
> +CONFIG_BANNER=y
> +CONFIG_MEMINFO=y
> +CONFIG_ENVIRONMENT_VARIABLES=y
> +CONFIG_GLOBALVAR=y
> +CONFIG_NVVAR=y
> +
> +#
> +# memory layout
> +#
> +CONFIG_HAVE_PBL_IMAGE=y
> +CONFIG_HAVE_PBL_MULTI_IMAGES=y
> +CONFIG_HAVE_IMAGE_COMPRESSION=y
> +CONFIG_PBL_IMAGE=y
> +CONFIG_PBL_MULTI_IMAGES=y
> +CONFIG_PBL_RELOCATABLE=y
> +CONFIG_IMAGE_COMPRESSION=y
> +# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
> +# CONFIG_IMAGE_COMPRESSION_LZO is not set
> +# CONFIG_IMAGE_COMPRESSION_GZIP is not set
> +# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
> +CONFIG_IMAGE_COMPRESSION_NONE=y
> +CONFIG_MMU=y
> +CONFIG_MMU_EARLY=y
> +CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> +CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> +CONFIG_BAREBOX_MAX_PBLX_SIZE=0xffffffff
> +CONFIG_STACK_SIZE=0x8000
> +CONFIG_MALLOC_SIZE=0x0
> +# CONFIG_EXPERIMENTAL is not set
> +# CONFIG_MALLOC_DLMALLOC is not set
> +CONFIG_MALLOC_TLSF=y
> +CONFIG_KALLSYMS=y
> +CONFIG_RELOCATABLE=y
> +# CONFIG_PANIC_HANG is not set
> +CONFIG_PROMPT="R-Pi> "
> +CONFIG_BAUDRATE=115200
> +CONFIG_CBSIZE=1024
> +CONFIG_SHELL_HUSH=y
> +# CONFIG_SHELL_SIMPLE is not set
> +# CONFIG_SHELL_NONE is not set
> +CONFIG_GLOB=y
> +CONFIG_GLOB_SORT=y
> +CONFIG_PROMPT_HUSH_PS2="> "
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_PASSWORD=y
> +CONFIG_PASSWORD_DEFAULT=""
> +CONFIG_PASSWD_SUM_MD5=y
> +# CONFIG_PASSWD_SUM_SHA1 is not set
> +# CONFIG_PASSWD_SUM_SHA256 is not set
> +# CONFIG_PASSWD_SUM_SHA512 is not set
> +# CONFIG_PASSWD_CRYPTO_PBKDF2 is not set
> +CONFIG_DYNAMIC_CRC_TABLE=y
> +CONFIG_ERRNO_MESSAGES=y
> +CONFIG_TIMESTAMP=y
> +CONFIG_BOOTM=y
> +CONFIG_BOOTM_SHOW_TYPE=y
> +CONFIG_BOOTM_VERBOSE=y
> +CONFIG_BOOTM_INITRD=y
> +CONFIG_BOOTM_OFTREE=y
> +# CONFIG_BOOTM_OFTREE_UIMAGE is not set
> +# CONFIG_BOOTM_AIMAGE is not set
> +# CONFIG_BOOTM_FITIMAGE is not set
> +CONFIG_BLSPEC=y
> +CONFIG_FLEXIBLE_BOOTARGS=y
> +# CONFIG_IMD is not set
> +# CONFIG_KERNEL_INSTALL_TARGET is not set
> +CONFIG_CONSOLE_FULL=y
> +# CONFIG_CONSOLE_SIMPLE is not set
> +# CONFIG_CONSOLE_NONE is not set
> +CONFIG_CONSOLE_ACTIVATE_FIRST=y
> +# CONFIG_CONSOLE_ACTIVATE_ALL is not set
> +# CONFIG_CONSOLE_ACTIVATE_NONE is not set
> +# CONFIG_CONSOLE_ALLOW_COLOR is not set
> +# CONFIG_PBL_CONSOLE is not set
> +# CONFIG_CONSOLE_RATP is not set
> +CONFIG_PARTITION=y
> +CONFIG_PARTITION_DISK=y
> +CONFIG_PARTITION_DISK_DOS=y
> +# CONFIG_PARTITION_DISK_EFI is not set
> +CONFIG_ENV_HANDLING=y
> +CONFIG_DEFAULT_ENVIRONMENT=y
> +CONFIG_DEFAULT_COMPRESSION_NONE=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
> +# CONFIG_BAREBOXENV_TARGET is not set
> +# CONFIG_BAREBOXCRC32_TARGET is not set
> +CONFIG_POLLER=y
> +# CONFIG_STATE is not set
> +# CONFIG_BOOTCHOOSER is not set
> +# CONFIG_RESET_SOURCE is not set
> +
> +#
> +# Debugging
> +#
> +CONFIG_COMPILE_LOGLEVEL=6
> +CONFIG_DEFAULT_LOGLEVEL=7
> +# CONFIG_DEBUG_INFO is not set
> +# CONFIG_DEBUG_LL is not set
> +# CONFIG_DEBUG_INITCALLS is not set
> +CONFIG_HAS_DEBUG_LL=y
> +CONFIG_COMMAND_SUPPORT=y
> +CONFIG_COMPILE_HASH=y
> +CONFIG_COMPILE_MEMORY=y
> +
> +#
> +# Commands
> +#
> +
> +#
> +# Information
> +#
> +CONFIG_CMD_ARM_CPUINFO=y
> +CONFIG_CMD_DEVINFO=y
> +# CONFIG_CMD_DMESG is not set
> +CONFIG_CMD_DRVINFO=y
> +CONFIG_CMD_HELP=y
> +CONFIG_LONGHELP=y
> +CONFIG_CMD_IOMEM=y
> +# CONFIG_CMD_IMD is not set
> +CONFIG_CMD_MEMINFO=y
> +# CONFIG_CMD_ARM_MMUINFO is not set
> +# CONFIG_CMD_REGULATOR is not set
> +CONFIG_CMD_VERSION=y
> +# CONFIG_CMD_MMC_EXTCSD is not set
> +
> +#
> +# Boot
> +#
> +CONFIG_CMD_BOOT=y
> +CONFIG_CMD_BOOTM=y
> +CONFIG_CMD_BOOTU=y
> +# CONFIG_CMD_BOOTZ is not set
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_LOADB=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_LOADY=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_UIMAGE=y
> +
> +#
> +# Partition
> +#
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_AUTOMOUNT=y
> +CONFIG_CMD_MOUNT=y
> +CONFIG_CMD_UMOUNT=y
> +
> +#
> +# Environment
> +#
> +CONFIG_CMD_NV=y
> +CONFIG_CMD_EXPORT=y
> +# CONFIG_CMD_DEFAULTENV is not set
> +CONFIG_CMD_GLOBAL=y
> +# CONFIG_CMD_LOADENV is not set
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_MAGICVAR=y
> +CONFIG_CMD_MAGICVAR_HELP=y
> +CONFIG_CMD_SAVEENV=y
> +
> +#
> +# File
> +#
> +CONFIG_CMD_BASENAME=y
> +CONFIG_CMD_CAT=y
> +CONFIG_CMD_CD=y
> +CONFIG_CMD_CP=y
> +# CONFIG_CMD_CMP is not set
> +CONFIG_CMD_DIGEST=y
> +CONFIG_CMD_DIRNAME=y
> +CONFIG_CMD_FILETYPE=y
> +CONFIG_CMD_LN=y
> +CONFIG_CMD_LS=y
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_MKDIR=y
> +CONFIG_CMD_PWD=y
> +CONFIG_CMD_READLINK=y
> +CONFIG_CMD_RM=y
> +CONFIG_CMD_RMDIR=y
> +# CONFIG_CMD_SHA1SUM is not set
> +# CONFIG_CMD_SHA224SUM is not set
> +# CONFIG_CMD_SHA256SUM is not set
> +# CONFIG_CMD_SHA384SUM is not set
> +# CONFIG_CMD_SHA512SUM is not set
> +CONFIG_CMD_UNCOMPRESS=y
> +
> +#
> +# Shell scripting
> +#
> +CONFIG_CMD_FALSE=y
> +CONFIG_CMD_GETOPT=y
> +CONFIG_CMD_LET=y
> +CONFIG_CMD_MSLEEP=y
> +# CONFIG_CMD_READF is not set
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_TEST=y
> +CONFIG_CMD_TRUE=y
> +
> +#
> +# Console and Framebuffer interaction
> +#
> +CONFIG_CMD_CLEAR=y
> +CONFIG_CMD_ECHO=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_LOGIN=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +# CONFIG_CMD_MENUTREE is not set
> +CONFIG_CMD_PASSWD=y
> +CONFIG_PASSWD_MODE_HIDE=y
> +# CONFIG_PASSWD_MODE_STAR is not set
> +# CONFIG_PASSWD_MODE_CLEAR is not set
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIMEOUT=y
> +
> +#
> +# Memory
> +#
> +CONFIG_CMD_CRC=y
> +CONFIG_CMD_CRC_CMP=y
> +CONFIG_CMD_MD=y
> +CONFIG_CMD_MEMCMP=y
> +CONFIG_CMD_MEMCPY=y
> +CONFIG_CMD_MEMSET=y
> +# CONFIG_CMD_MEMTEST is not set
> +CONFIG_CMD_MM=y
> +CONFIG_CMD_MW=y
> +
> +#
> +# Hardware manipulation
> +#
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DETECT=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_LED is not set
> +# CONFIG_CMD_POWEROFF is not set
> +# CONFIG_CMD_SPI is not set
> +# CONFIG_CMD_LED_TRIGGER is not set
> +CONFIG_CMD_WD=y
> +CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> +
> +#
> +# Miscellaneous
> +#
> +# CONFIG_CMD_2048 is not set
> +# CONFIG_CMD_BAREBOX_UPDATE is not set
> +# CONFIG_CMD_FIRMWARELOAD is not set
> +CONFIG_CMD_OF_DUMP=y
> +CONFIG_CMD_OF_NODE=y
> +CONFIG_CMD_OF_PROPERTY=y
> +# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
> +# CONFIG_CMD_OF_FIXUP_STATUS is not set
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_TIME=y
> +# CONFIG_CMD_DHRYSTONE is not set
> +# CONFIG_CMD_SPD_DECODE is not set
> +# CONFIG_CMD_SEED is not set
> +# CONFIG_NET is not set
> +
> +#
> +# Drivers
> +#
> +CONFIG_OFTREE=y
> +CONFIG_OFTREE_MEM_GENERIC=y
> +CONFIG_DTC=y
> +CONFIG_OFDEVICE=y
> +CONFIG_OF_GPIO=y
> +# CONFIG_OF_BAREBOX_DRIVERS is not set
> +# CONFIG_AIODEV is not set
> +CONFIG_ARM_AMBA=y
> +
> +#
> +# serial drivers
> +#
> +# CONFIG_SERIAL_DEV_BUS is not set
> +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> +CONFIG_SERIAL_AMBA_PL011=y
> +# CONFIG_DRIVER_SERIAL_NS16550 is not set
> +# CONFIG_DRIVER_SERIAL_CADENCE is not set
> +
> +#
> +# SPI drivers
> +#
> +CONFIG_SPI=y
> +# CONFIG_DRIVER_SPI_GPIO is not set
> +# CONFIG_I2C is not set
> +# CONFIG_MTD is not set
> +CONFIG_DISK=y
> +CONFIG_DISK_WRITE=y
> +
> +#
> +# drive types
> +#
> +# CONFIG_DISK_ATA is not set
> +# CONFIG_DISK_AHCI is not set
> +
> +#
> +# interface types
> +#
> +# CONFIG_DISK_INTF_PLATFORM_IDE is not set
> +# CONFIG_USB_HOST is not set
> +# CONFIG_USB_GADGET is not set
> +# CONFIG_USB_MUSB is not set
> +# CONFIG_VIDEO is not set
> +CONFIG_MCI=y
> +
> +#
> +# --- Feature list ---
> +#
> +# CONFIG_MCI_STARTUP is not set
> +CONFIG_MCI_INFO=y
> +CONFIG_MCI_WRITE=y
> +# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> +
> +#
> +# --- MCI host drivers ---
> +#
> +# CONFIG_MCI_DW is not set
> +CONFIG_MCI_BCM283X=y
> +# CONFIG_MCI_MMCI is not set
> +# CONFIG_MCI_SPI is not set
> +CONFIG_HAVE_CLK=y
> +CONFIG_CLKDEV_LOOKUP=y
> +CONFIG_COMMON_CLK=y
> +CONFIG_CLOCKSOURCE_BCM283X=y
> +CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
> +
> +#
> +# MFD
> +#
> +# CONFIG_MFD_MC13XXX is not set
> +# CONFIG_MFD_SYSCON is not set
> +
> +#
> +# Misc devices
> +#
> +# CONFIG_JTAG is not set
> +# CONFIG_SRAM is not set
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +# CONFIG_LED_GPIO_OF is not set
> +# CONFIG_LED_GPIO_RGB is not set
> +# CONFIG_LED_GPIO_BICOLOR is not set
> +CONFIG_LED_TRIGGERS=y
> +
> +#
> +# EEPROM support
> +#
> +# CONFIG_EEPROM_AT25 is not set
> +
> +#
> +# Input device support
> +#
> +# CONFIG_KEYBOARD_GPIO is not set
> +CONFIG_WATCHDOG=y
> +# CONFIG_WATCHDOG_POLLER is not set
> +# CONFIG_WATCHDOG_DW is not set
> +CONFIG_WATCHDOG_BCM2835=y
> +# CONFIG_PWM is not set
> +# CONFIG_HWRNG is not set
> +
> +#
> +# DMA support
> +#
> +CONFIG_GPIOLIB=y
> +
> +#
> +# GPIO
> +#
> +# CONFIG_GPIO_74164 is not set
> +CONFIG_GPIO_BCM283X=y
> +# CONFIG_GPIO_GENERIC_PLATFORM is not set
> +# CONFIG_GPIO_IMX is not set
> +# CONFIG_GPIO_VF610 is not set
> +# CONFIG_GPIO_MXS is not set
> +# CONFIG_GPIO_OMAP is not set
> +# CONFIG_GPIO_PL061 is not set
> +# CONFIG_GPIO_DESIGNWARE is not set
> +# CONFIG_W1 is not set
> +# CONFIG_PINCTRL is not set
> +# CONFIG_NVMEM is not set
> +
> +#
> +# Bus devices
> +#
> +CONFIG_REGULATOR=y
> +# CONFIG_REGULATOR_FIXED is not set
> +CONFIG_REGULATOR_BCM283X=y
> +# CONFIG_RESET_CONTROLLER is not set
> +# CONFIG_RTC_CLASS is not set
> +
> +#
> +# Firmware Drivers
> +#
> +# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> +# CONFIG_GENERIC_PHY is not set
> +# CONFIG_CRYPTO_HW is not set
> +
> +#
> +# Memory controller drivers
> +#
> +
> +#
> +# Filesystem support
> +#
> +CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> +CONFIG_FS_AUTOMOUNT=y
> +# CONFIG_FS_CRAMFS is not set
> +CONFIG_FS_EXT4=y
> +CONFIG_FS_RAMFS=y
> +CONFIG_FS_DEVFS=y
> +CONFIG_FS_FAT=y
> +CONFIG_FS_FAT_WRITE=y
> +CONFIG_FS_FAT_LFN=y
> +# CONFIG_FS_BPKFS is not set
> +# CONFIG_FS_UIMAGEFS is not set
> +# CONFIG_FS_PSTORE is not set
> +# CONFIG_FS_SQUASHFS is not set
> +
> +#
> +# ZLIB support disabled
> +#
> +
> +#
> +# LZ4 support disabled
> +#
> +
> +#
> +# LZO support disabled
> +#
> +
> +#
> +# XZ support disabled
> +#
> +
> +#
> +# ZSTD support disabled
> +#
> +
> +#
> +# Library routines
> +#
> +CONFIG_PARAMETER=y
> +CONFIG_UNCOMPRESS=y
> +# CONFIG_ZLIB is not set
> +# CONFIG_BZLIB is not set
> +# CONFIG_LZ4_DECOMPRESS is not set
> +# CONFIG_ZSTD_DECOMPRESS is not set
> +# CONFIG_XZ_DECOMPRESS is not set
> +# CONFIG_GENERIC_FIND_NEXT_BIT is not set
> +CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> +# CONFIG_LZO_DECOMPRESS is not set
> +CONFIG_FNMATCH=y
> +CONFIG_QSORT=y
> +CONFIG_XYMODEM=y
> +# CONFIG_RATP is not set
> +# CONFIG_ALLOW_PRNG_FALLBACK is not set
> +# CONFIG_CRC_CCITT is not set
> +
> +#
> +# Library gui routines
> +#
> +# CONFIG_BAREBOX_LOGO is not set
> +
> +#
> +# Crypto support
> +#
> +CONFIG_CRC32=y
> +CONFIG_CRC16=y
> +CONFIG_DIGEST=y
> +CONFIG_MD5=y
> +CONFIG_SHA1=y
> +CONFIG_SHA256=y
> +# CONFIG_DIGEST_CRC32_GENERIC is not set
> +CONFIG_DIGEST_MD5_GENERIC=y
> +CONFIG_DIGEST_SHA1_GENERIC=y
> +# CONFIG_DIGEST_SHA224_GENERIC is not set
> +CONFIG_DIGEST_SHA256_GENERIC=y
> +# CONFIG_DIGEST_SHA384_GENERIC is not set
> +# CONFIG_DIGEST_SHA512_GENERIC is not set
> +# CONFIG_DIGEST_HMAC_GENERIC is not set
> +# CONFIG_DIGEST_SHA1_ARM is not set
> +# CONFIG_DIGEST_SHA256_ARM is not set
> +# CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
> index 826d222..72d5421 100644
> --- a/configs/platform-v7a/barebox-vexpress.config
> +++ b/configs/platform-v7a/barebox-vexpress.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -364,6 +364,7 @@ CONFIG_ARM_AMBA=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_SERIAL_AMBA_PL011=y
> # CONFIG_DRIVER_SERIAL_NS16550 is not set
> @@ -389,6 +390,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> #
> # CONFIG_AR8327N_PHY is not set
> # CONFIG_AT803X_PHY is not set
> +# CONFIG_DAVICOM_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> @@ -522,6 +524,15 @@ CONFIG_STATE_DRV=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -599,3 +610,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
> # CONFIG_DIGEST_SHA1_ARM is not set
> # CONFIG_DIGEST_SHA256_ARM is not set
> # CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> deleted file mode 100644
> index cfca106..0000000
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> -Date: Fri, 10 Jun 2016 14:02:30 +0200
> -Subject: [PATCH] beaglebone: add state entry for mmc0 and mmc1
> -
> -Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ----
> - arch/arm/dts/am335x-bone-common.dtsi | 15 +++++++++++++++
> - 1 file changed, 15 insertions(+)
> -
> -diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi
> -index 0413724e0ca1..6e58714516fd 100644
> ---- a/arch/arm/dts/am335x-bone-common.dtsi
> -+++ b/arch/arm/dts/am335x-bone-common.dtsi
> -@@ -11,6 +11,21 @@
> - linux,stdout-path = &uart0;
> - };
> -
> -+ bootstate: bootstate {
> -+ compatible = "barebox,bootstate";
> -+ backend-type = "nv";
> -+
> -+ system0 {
> -+ default_attempts = <3>;
> -+ boot = "mmc0";
> -+ };
> -+
> -+ system1 {
> -+ default_attempts = <3>;
> -+ boot = "mmc1";
> -+ };
> -+ };
> -+
> - cpus {
> - cpu@0 {
> - cpu0-supply = <&dcdc2_reg>;
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> deleted file mode 100644
> index 4b0c22d..0000000
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -From: Roland Hieber <r.hieber@pengutronix.de>
> -Date: Tue, 15 May 2018 23:44:48 +0200
> -Subject: [PATCH] Release pengutronix/multi_v7/20180515-1
> -
> -Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ----
> - Makefile | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> -diff --git a/Makefile b/Makefile
> -index 88c19917394f..11e79cc339f4 100644
> ---- a/Makefile
> -+++ b/Makefile
> -@@ -1,7 +1,7 @@
> - VERSION = 2018
> - PATCHLEVEL = 05
> - SUBLEVEL = 0
> --EXTRAVERSION =
> -+EXTRAVERSION =-20180515-1
> - NAME = None
> -
> - # *DOCUMENTATION*
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/series b/configs/platform-v7a/patches/barebox-2018.05.0/series
> deleted file mode 100644
> index 272791c..0000000
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/series
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -# umpf-base: v2018.05.0
> -# umpf-name: pengutronix/multi_v7
> -# umpf-version: pengutronix/multi_v7/20180515-1
> -# umpf-topic: v2018.05.0/customers/pengutronix/beaglebone
> -# umpf-hashinfo: d1f50bff60c7069caad2df4ef02f672be456f141
> -# umpf-topic-range: cd4320e3e86bd2ab7b4a19016ef8df6c5d69a5a5..d1f50bff60c7069caad2df4ef02f672be456f141
> -0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> -# umpf-topic: v2018.05.0/customers/pengutronix/udoo-neo
> -# umpf-hashinfo: 772e5039c9a147256a085c76a74cf5cb5c14ec35
> -# umpf-topic-range: d1f50bff60c7069caad2df4ef02f672be456f141..183d8e8d0ccf827481923b3872144e2c10ef9fac
> -0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> -# umpf-release: pengutronix/multi_v7/20180515-1
> -# umpf-topic-range: 183d8e8d0ccf827481923b3872144e2c10ef9fac..734e18abc455f563837dd6ad0df6fb9378053b00
> -0201-Release-pengutronix-multi_v7-20180515-1.patch
> -# umpf-end
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> new file mode 100644
> index 0000000..bd459d0
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> @@ -0,0 +1,299 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:37 +0100
> +Subject: [PATCH] ARM: import opcode helpers from Linux kernel
> +
> +Those are needed to generate some of the ARM SEC and VIRT
> +opcodes in a portable way.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/include/asm/opcodes-virt.h | 39 +++++
> + arch/arm/include/asm/opcodes.h | 231 ++++++++++++++++++++++++++++
> + 2 files changed, 270 insertions(+)
> + create mode 100644 arch/arm/include/asm/opcodes-virt.h
> + create mode 100644 arch/arm/include/asm/opcodes.h
> +
> +diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h
> +new file mode 100644
> +index 000000000000..efcfdf92d9d5
> +--- /dev/null
> ++++ b/arch/arm/include/asm/opcodes-virt.h
> +@@ -0,0 +1,39 @@
> ++/*
> ++ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
> ++ * Copyright (C) 2012 Linaro Limited
> ++ *
> ++ * This program is free software; you can redistribute it and/or modify
> ++ * it under the terms of the GNU General Public License as published by
> ++ * the Free Software Foundation; either version 2 of the License, or
> ++ * (at your option) any later version.
> ++ *
> ++ * This program is distributed in the hope that it will be useful,
> ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> ++ * GNU General Public License for more details.
> ++ *
> ++ * You should have received a copy of the GNU General Public License along
> ++ * with this program; if not, write to the Free Software Foundation, Inc.,
> ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> ++ */
> ++#ifndef __ASM_ARM_OPCODES_VIRT_H
> ++#define __ASM_ARM_OPCODES_VIRT_H
> ++
> ++#include <asm/opcodes.h>
> ++
> ++#define __HVC(imm16) __inst_arm_thumb32( \
> ++ 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \
> ++ 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \
> ++)
> ++
> ++#define __ERET __inst_arm_thumb32( \
> ++ 0xE160006E, \
> ++ 0xF3DE8F00 \
> ++)
> ++
> ++#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \
> ++ 0xE12EF300 | regnum, \
> ++ 0xF3808E30 | (regnum << 16) \
> ++)
> ++
> ++#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
> +diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
> +new file mode 100644
> +index 000000000000..a78bf5d2c518
> +--- /dev/null
> ++++ b/arch/arm/include/asm/opcodes.h
> +@@ -0,0 +1,231 @@
> ++/*
> ++ * arch/arm/include/asm/opcodes.h
> ++ *
> ++ * This program is free software; you can redistribute it and/or modify
> ++ * it under the terms of the GNU General Public License version 2 as
> ++ * published by the Free Software Foundation.
> ++ */
> ++
> ++#ifndef __ASM_ARM_OPCODES_H
> ++#define __ASM_ARM_OPCODES_H
> ++
> ++#ifndef __ASSEMBLY__
> ++#include <linux/linkage.h>
> ++extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
> ++#endif
> ++
> ++#define ARM_OPCODE_CONDTEST_FAIL 0
> ++#define ARM_OPCODE_CONDTEST_PASS 1
> ++#define ARM_OPCODE_CONDTEST_UNCOND 2
> ++
> ++
> ++/*
> ++ * Assembler opcode byteswap helpers.
> ++ * These are only intended for use by this header: don't use them directly,
> ++ * because they will be suboptimal in most cases.
> ++ */
> ++#define ___asm_opcode_swab32(x) ( \
> ++ (((x) << 24) & 0xFF000000) \
> ++ | (((x) << 8) & 0x00FF0000) \
> ++ | (((x) >> 8) & 0x0000FF00) \
> ++ | (((x) >> 24) & 0x000000FF) \
> ++)
> ++#define ___asm_opcode_swab16(x) ( \
> ++ (((x) << 8) & 0xFF00) \
> ++ | (((x) >> 8) & 0x00FF) \
> ++)
> ++#define ___asm_opcode_swahb32(x) ( \
> ++ (((x) << 8) & 0xFF00FF00) \
> ++ | (((x) >> 8) & 0x00FF00FF) \
> ++)
> ++#define ___asm_opcode_swahw32(x) ( \
> ++ (((x) << 16) & 0xFFFF0000) \
> ++ | (((x) >> 16) & 0x0000FFFF) \
> ++)
> ++#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
> ++#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
> ++
> ++
> ++/*
> ++ * Opcode byteswap helpers
> ++ *
> ++ * These macros help with converting instructions between a canonical integer
> ++ * format and in-memory representation, in an endianness-agnostic manner.
> ++ *
> ++ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
> ++ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
> ++ *
> ++ *
> ++ * Canonical instruction representation:
> ++ *
> ++ * ARM: 0xKKLLMMNN
> ++ * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8
> ++ * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8
> ++ *
> ++ * There is no way to distinguish an ARM instruction in canonical representation
> ++ * from a Thumb instruction (just as these cannot be distinguished in memory).
> ++ * Where this distinction is important, it needs to be tracked separately.
> ++ *
> ++ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
> ++ * represent any valid Thumb-2 instruction. For this range,
> ++ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
> ++ *
> ++ * The ___asm variants are intended only for use by this header, in situations
> ++ * involving inline assembler. For .S files, the normal __opcode_*() macros
> ++ * should do the right thing.
> ++ */
> ++#ifdef __ASSEMBLY__
> ++
> ++#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
> ++#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
> ++#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
> ++#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
> ++#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
> ++#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
> ++
> ++#else /* ! __ASSEMBLY__ */
> ++
> ++#include <linux/types.h>
> ++#include <linux/swab.h>
> ++
> ++#define ___opcode_swab32(x) swab32(x)
> ++#define ___opcode_swab16(x) swab16(x)
> ++#define ___opcode_swahb32(x) swahb32(x)
> ++#define ___opcode_swahw32(x) swahw32(x)
> ++#define ___opcode_identity32(x) ((u32)(x))
> ++#define ___opcode_identity16(x) ((u16)(x))
> ++
> ++#endif /* ! __ASSEMBLY__ */
> ++
> ++
> ++#ifdef CONFIG_CPU_ENDIAN_BE8
> ++
> ++#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
> ++#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
> ++#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
> ++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
> ++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
> ++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
> ++
> ++#else /* ! CONFIG_CPU_ENDIAN_BE8 */
> ++
> ++#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
> ++#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
> ++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
> ++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
> ++#ifndef CONFIG_CPU_ENDIAN_BE32
> ++/*
> ++ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
> ++ * work in all cases, due to alignment constraints. For now, a correct
> ++ * version is not provided for BE32.
> ++ */
> ++#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
> ++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
> ++#endif
> ++
> ++#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
> ++
> ++#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
> ++#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
> ++#ifndef CONFIG_CPU_ENDIAN_BE32
> ++#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
> ++#endif
> ++
> ++/* Operations specific to Thumb opcodes */
> ++
> ++/* Instruction size checks: */
> ++#define __opcode_is_thumb32(x) ( \
> ++ ((x) & 0xF8000000) == 0xE8000000 \
> ++ || ((x) & 0xF0000000) == 0xF0000000 \
> ++)
> ++#define __opcode_is_thumb16(x) ( \
> ++ ((x) & 0xFFFF0000) == 0 \
> ++ && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \
> ++)
> ++
> ++/* Operations to construct or split 32-bit Thumb instructions: */
> ++#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
> ++#define __opcode_thumb32_second(x) (___opcode_identity16(x))
> ++#define __opcode_thumb32_compose(first, second) ( \
> ++ (___opcode_identity32(___opcode_identity16(first)) << 16) \
> ++ | ___opcode_identity32(___opcode_identity16(second)) \
> ++)
> ++#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
> ++#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
> ++#define ___asm_opcode_thumb32_compose(first, second) ( \
> ++ (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
> ++ | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \
> ++)
> ++
> ++/*
> ++ * Opcode injection helpers
> ++ *
> ++ * In rare cases it is necessary to assemble an opcode which the
> ++ * assembler does not support directly, or which would normally be
> ++ * rejected because of the CFLAGS or AFLAGS used to build the affected
> ++ * file.
> ++ *
> ++ * Before using these macros, consider carefully whether it is feasible
> ++ * instead to change the build flags for your file, or whether it really
> ++ * makes sense to support old assembler versions when building that
> ++ * particular kernel feature.
> ++ *
> ++ * The macros defined here should only be used where there is no viable
> ++ * alternative.
> ++ *
> ++ *
> ++ * __inst_arm(x): emit the specified ARM opcode
> ++ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
> ++ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
> ++ *
> ++ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
> ++ * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2
> ++ * kernel is being built
> ++ *
> ++ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
> ++ * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2
> ++ * kernel is being built
> ++ *
> ++ *
> ++ * Note that using these macros directly is poor practice. Instead, you
> ++ * should use them to define human-readable wrapper macros to encode the
> ++ * instructions that you care about. In code which might run on ARMv7 or
> ++ * above, you can usually use the __inst_arm_thumb{16,32} macros to
> ++ * specify the ARM and Thumb alternatives at the same time. This ensures
> ++ * that the correct opcode gets emitted depending on the instruction set
> ++ * used for the kernel build.
> ++ *
> ++ * Look at opcodes-virt.h for an example of how to use these macros.
> ++ */
> ++#include <linux/stringify.h>
> ++
> ++#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
> ++#define __inst_thumb32(x) ___inst_thumb32( \
> ++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \
> ++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \
> ++)
> ++#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
> ++
> ++#ifdef CONFIG_THUMB2_BAREBOX
> ++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
> ++ __inst_thumb16(thumb_opcode)
> ++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
> ++ __inst_thumb32(thumb_opcode)
> ++#else
> ++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
> ++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
> ++#endif
> ++
> ++/* Helpers for the helpers. Don't use these directly. */
> ++#ifdef __ASSEMBLY__
> ++#define ___inst_arm(x) .long x
> ++#define ___inst_thumb16(x) .short x
> ++#define ___inst_thumb32(first, second) .short first, second
> ++#else
> ++#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
> ++#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
> ++#define ___inst_thumb32(first, second) \
> ++ ".short " __stringify(first) ", " __stringify(second) "\n\t"
> ++#endif
> ++
> ++#endif /* __ASM_ARM_OPCODES_H */
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> new file mode 100644
> index 0000000..fcd116a
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> @@ -0,0 +1,88 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:38 +0100
> +Subject: [PATCH] ARM: safely switch from HYP to SVC mode if required
> +
> +This is a port of the Linux safe_svcmode_maskall macro to
> +the Barebox lowlevel init.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/lowlevel.S | 18 +++++++++++++++---
> + arch/arm/include/asm/system.h | 26 ++++++++++++++++++++++++++
> + 2 files changed, 41 insertions(+), 3 deletions(-)
> +
> +diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
> +index 7696a198e764..43665981e48b 100644
> +--- a/arch/arm/cpu/lowlevel.S
> ++++ b/arch/arm/cpu/lowlevel.S
> +@@ -1,16 +1,28 @@
> + #include <linux/linkage.h>
> + #include <init.h>
> + #include <asm/system.h>
> ++#include <asm/opcodes-virt.h>
> +
> + .section ".text_bare_init_","ax"
> + ENTRY(arm_cpu_lowlevel_init)
> + /* save lr, since it may be banked away with a processor mode change */
> + mov r2, lr
> ++
> + /* set the cpu to SVC32 mode, mask irq and fiq */
> + mrs r12, cpsr
> +- bic r12, r12, #0x1f
> +- orr r12, r12, #0xd3
> +- msr cpsr, r12
> ++ eor r12, r12, #HYP_MODE
> ++ tst r12, #MODE_MASK
> ++ bic r12, r12, #MODE_MASK
> ++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
> ++THUMB( orr r12, r12, #PSR_T_BIT )
> ++ bne 1f
> ++ orr r12, r12, #PSR_A_BIT
> ++ adr lr, 2f
> ++ msr spsr_cxsf, r12
> ++ __MSR_ELR_HYP(14)
> ++ __ERET
> ++1: msr cpsr_c, r12
> ++2:
> +
> + #if __LINUX_ARM_ARCH__ >= 6
> + /*
> +diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
> +index 5cf828ea36cb..48242ab473f4 100644
> +--- a/arch/arm/include/asm/system.h
> ++++ b/arch/arm/include/asm/system.h
> +@@ -60,6 +60,32 @@
> + #define CR_AFE (1 << 29) /* Access flag enable */
> + #define CR_TE (1 << 30) /* Thumb exception enable */
> +
> ++/*
> ++ * PSR bits
> ++ */
> ++#define USR_MODE 0x00000010
> ++#define FIQ_MODE 0x00000011
> ++#define IRQ_MODE 0x00000012
> ++#define SVC_MODE 0x00000013
> ++#define ABT_MODE 0x00000017
> ++#define HYP_MODE 0x0000001a
> ++#define UND_MODE 0x0000001b
> ++#define SYSTEM_MODE 0x0000001f
> ++#define MODE32_BIT 0x00000010
> ++#define MODE_MASK 0x0000001f
> ++
> ++#define PSR_T_BIT 0x00000020
> ++#define PSR_F_BIT 0x00000040
> ++#define PSR_I_BIT 0x00000080
> ++#define PSR_A_BIT 0x00000100
> ++#define PSR_E_BIT 0x00000200
> ++#define PSR_J_BIT 0x01000000
> ++#define PSR_Q_BIT 0x08000000
> ++#define PSR_V_BIT 0x10000000
> ++#define PSR_C_BIT 0x20000000
> ++#define PSR_Z_BIT 0x40000000
> ++#define PSR_N_BIT 0x80000000
> ++
> + #ifndef __ASSEMBLY__
> + #if __LINUX_ARM_ARCH__ >= 7
> + static inline unsigned int current_el(void)
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> new file mode 100644
> index 0000000..eed9e52
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> @@ -0,0 +1,37 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:39 +0100
> +Subject: [PATCH] ARM: allow secure monitor code to be built without PSCI
> +
> +The hyp mode handling added in the secure monitor code is also useful
> +when Barebox doesn't have PSCI control. Allow to build without PSCI.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/sm_as.S | 4 ++++
> + 1 file changed, 4 insertions(+)
> +
> +diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> +index 09580e75de5f..0d01e1bf2435 100644
> +--- a/arch/arm/cpu/sm_as.S
> ++++ b/arch/arm/cpu/sm_as.S
> +@@ -129,7 +129,9 @@ secure_monitor:
> + sub sp, sp, #4*4 @ allocate result structure on stack
> + mov r12, sp
> + push {r4-r6, r12}
> ++#ifdef CONFIG_ARM_PSCI
> + bl psci_entry
> ++#endif
> + pop {r4-r6, r12}
> + ldm r12, {r0-r3}
> + add sp, sp, #4*4
> +@@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
> + mcr p15, 0, r0, c1, c0, 1 @ ACTLR
> +
> + bl secure_monitor_stack_setup
> ++#ifdef CONFIG_ARM_PSCI
> + bl psci_cpu_entry_c
> ++#endif
> +
> + ENDPROC(psci_cpu_entry)
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> new file mode 100644
> index 0000000..8047922
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> @@ -0,0 +1,193 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:40 +0100
> +Subject: [PATCH] ARM: add file for HYP mode related setup
> +
> +This adds routines to add hyp mode vectors and switch back to HYP
> +mode from SVC. This is needed in both the PBL and Barebox proper.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/Makefile | 3 +
> + arch/arm/cpu/hyp.S | 116 ++++++++++++++++++++++++++++++++++
> + arch/arm/cpu/sm_as.S | 11 ----
> + arch/arm/include/asm/secure.h | 3 +
> + 4 files changed, 122 insertions(+), 11 deletions(-)
> + create mode 100644 arch/arm/cpu/hyp.S
> +
> +diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
> +index 874d723e2cee..0a403bc981c5 100644
> +--- a/arch/arm/cpu/Makefile
> ++++ b/arch/arm/cpu/Makefile
> +@@ -4,6 +4,9 @@ obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions$(S64).o interrupts$(S64).o
> + obj-$(CONFIG_MMU) += mmu$(S64).o
> + lwl-y += lowlevel$(S64).o
> + obj-pbl-$(CONFIG_MMU) += mmu-early$(S64).o
> ++obj-pbl-$(CONFIG_CPU_32v7) += hyp.o
> ++AFLAGS_hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
> ++AFLAGS_pbl-hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
> +
> + obj-y += start.o entry.o
> +
> +diff --git a/arch/arm/cpu/hyp.S b/arch/arm/cpu/hyp.S
> +new file mode 100644
> +index 000000000000..1314b56eab25
> +--- /dev/null
> ++++ b/arch/arm/cpu/hyp.S
> +@@ -0,0 +1,116 @@
> ++#include <linux/linkage.h>
> ++#include <asm/system.h>
> ++#include <asm/opcodes-virt.h>
> ++#include <init.h>
> ++
> ++.arch_extension sec
> ++.arch_extension virt
> ++
> ++__BARE_INIT
> ++
> ++.data
> ++ .align 2
> ++ENTRY(__boot_cpu_mode)
> ++ .long 0
> ++.text
> ++
> ++ENTRY(__hyp_install)
> ++ mrs r12, cpsr
> ++ and r12, r12, #MODE_MASK
> ++
> ++ @ Save the initial CPU state
> ++ adr r0, .L__boot_cpu_mode_offset
> ++ ldr r1, [r0]
> ++ str r12, [r0, r1]
> ++
> ++ cmp r12, #HYP_MODE
> ++ movne pc, lr @ give up if the CPU is not in HYP mode
> ++
> ++ @ Now install the hypervisor stub:
> ++ adr r12, __hyp_vectors
> ++ mcr p15, 4, r12, c12, c0, 0 @ set hypervisor vector base (HVBAR)
> ++
> ++ @ Disable all traps, so we don't get any nasty surprise
> ++ mov r12, #0
> ++ mcr p15, 4, r12, c1, c1, 0 @ HCR
> ++ mcr p15, 4, r12, c1, c1, 2 @ HCPTR
> ++ mcr p15, 4, r12, c1, c1, 3 @ HSTR
> ++
> ++THUMB( orr r12, #(1 << 30) ) @ HSCTLR.TE
> ++ mcr p15, 4, r12, c1, c0, 0 @ HSCTLR
> ++
> ++ mrc p15, 4, r12, c1, c1, 1 @ HDCR
> ++ and r12, #0x1f @ Preserve HPMN
> ++ mcr p15, 4, r12, c1, c1, 1 @ HDCR
> ++
> ++ @ Make sure NS-SVC is initialised appropriately
> ++ mrc p15, 0, r12, c1, c0, 0 @ SCTLR
> ++ orr r12, #(1 << 5) @ CP15 barriers enabled
> ++ bic r12, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7)
> ++ bic r12, #(3 << 19) @ WXN and UWXN disabled
> ++ mcr p15, 0, r12, c1, c0, 0 @ SCTLR
> ++
> ++ mrc p15, 0, r12, c0, c0, 0 @ MIDR
> ++ mcr p15, 4, r12, c0, c0, 0 @ VPIDR
> ++
> ++ mrc p15, 0, r12, c0, c0, 5 @ MPIDR
> ++ mcr p15, 4, r12, c0, c0, 5 @ VMPIDR
> ++ bx lr
> ++ENDPROC(__hyp_install)
> ++
> ++ENTRY(armv7_hyp_install)
> ++ mov r2, lr
> ++
> ++ bl __hyp_install
> ++
> ++ /* set the cpu to SVC32 mode, mask irq and fiq */
> ++ mrs r12, cpsr
> ++ eor r12, r12, #HYP_MODE
> ++ tst r12, #MODE_MASK
> ++ bic r12, r12, #MODE_MASK
> ++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
> ++THUMB( orr r12, r12, #PSR_T_BIT )
> ++ bne 1f
> ++ orr r12, r12, #PSR_A_BIT
> ++ adr lr, 2f
> ++ msr spsr_cxsf, r12
> ++ __MSR_ELR_HYP(14)
> ++ __ERET
> ++1: msr cpsr_c, r12
> ++2:
> ++ mov pc, r2
> ++ENDPROC(armv7_hyp_install)
> ++
> ++ENTRY(armv7_switch_to_hyp)
> ++ mov r0, lr
> ++ mov r1, sp @ save SVC copy of LR and SP
> ++ isb
> ++ hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
> ++ mov sp, r1
> ++ mov lr, r0 @ restore SVC copy of LR and SP
> ++
> ++ bx lr
> ++ENDPROC(armv7_switch_to_hyp)
> ++
> ++.align 2
> ++.L__boot_cpu_mode_offset:
> ++ .long __boot_cpu_mode - .
> ++
> ++/* The HYP trap is crafted to match armv7_switch_to_hyp() */
> ++__hyp_do_trap:
> ++ mov lr, r0
> ++ mov sp, r1
> ++ bx lr
> ++ENDPROC(__hyp_do_trap)
> ++
> ++.align 5
> ++__hyp_vectors:
> ++__hyp_reset: W(b) .
> ++__hyp_und: W(b) .
> ++__hyp_svc: W(b) .
> ++__hyp_pabort: W(b) .
> ++__hyp_dabort: W(b) .
> ++__hyp_trap: W(b) __hyp_do_trap
> ++__hyp_irq: W(b) .
> ++__hyp_fiq: W(b) .
> ++ENDPROC(__hyp_vectors)
> +diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> +index 0d01e1bf2435..de6cd0406f4f 100644
> +--- a/arch/arm/cpu/sm_as.S
> ++++ b/arch/arm/cpu/sm_as.S
> +@@ -148,17 +148,6 @@ hyp_trap:
> + mov pc, lr @ do no switch modes, but
> + @ return to caller
> +
> +-ENTRY(armv7_switch_to_hyp)
> +- mov r0, lr
> +- mov r1, sp @ save SVC copy of LR and SP
> +- isb
> +- hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
> +- mov sp, r1
> +- mov lr, r0 @ restore SVC copy of LR and SP
> +-
> +- bx lr
> +-ENDPROC(armv7_switch_to_hyp)
> +-
> + ENTRY(psci_cpu_entry)
> + mrc p15, 0, r0, c1, c0, 1 @ ACTLR
> + orr r0, r0, #(1 << 6) @ Set SMP bit
> +diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
> +index a4cb1f6c1c44..663d81ea27dd 100644
> +--- a/arch/arm/include/asm/secure.h
> ++++ b/arch/arm/include/asm/secure.h
> +@@ -5,9 +5,12 @@
> +
> + int armv7_secure_monitor_install(void);
> + int __armv7_secure_monitor_install(void);
> ++
> + void armv7_switch_to_hyp(void);
> ++void armv7_hyp_install(void);
> +
> + extern unsigned char secure_monitor_init_vectors[];
> ++extern int __boot_cpu_mode;
> +
> + enum arm_security_state {
> + ARM_STATE_SECURE,
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> new file mode 100644
> index 0000000..b82de4b
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> @@ -0,0 +1,30 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:41 +0100
> +Subject: [PATCH] ARM: don't try to install secure monitor when entered in HYP
> + mode
> +
> +When Barebox has been entered in HYP mode, the CPU is already switched
> +to the non-secure world and it's not possible for Barebox to install
> +it's own secure monitor.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/sm.c | 3 +++
> + 1 file changed, 3 insertions(+)
> +
> +diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
> +index cb0bac106b5f..1246d8e3a441 100644
> +--- a/arch/arm/cpu/sm.c
> ++++ b/arch/arm/cpu/sm.c
> +@@ -184,6 +184,9 @@ int armv7_secure_monitor_install(void)
> + return -EINVAL;
> + }
> +
> ++ if (__boot_cpu_mode == HYP_MODE)
> ++ return 0;
> ++
> + mmuon = get_cr() & CR_M;
> +
> + vbar = get_vbar();
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> new file mode 100644
> index 0000000..1de95c1
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> @@ -0,0 +1,31 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:42 +0100
> +Subject: [PATCH] ARM: default to starting kernel in HYP mode when entered in
> + HYP
> +
> +When Barebox has been entered in HYP mode, there is a high chance that
> +the kernel is intended to be started in HYP mode also. Get this
> +default into place.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/sm.c | 3 +++
> + 1 file changed, 3 insertions(+)
> +
> +diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
> +index 1246d8e3a441..6fad30adabc9 100644
> +--- a/arch/arm/cpu/sm.c
> ++++ b/arch/arm/cpu/sm.c
> +@@ -262,6 +262,9 @@ static int sm_init(void)
> + bootm_secure_state_names,
> + ARRAY_SIZE(bootm_secure_state_names));
> +
> ++ if (__boot_cpu_mode == HYP_MODE)
> ++ bootm_secure_state = ARM_STATE_HYP;
> ++
> + return 0;
> + }
> + device_initcall(sm_init);
> +\ No newline at end of file
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> new file mode 100644
> index 0000000..10615e9
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> @@ -0,0 +1,105 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:43 +0100
> +Subject: [PATCH] ARM: install HYP vectors at PBL and Barebox entry
> +
> +If the CPU was already in HYP mode when entering the PBL, install a
> +simple trap handler to allow to get back from SVC to HYP before
> +switching to HYP mode.
> +
> +As the vectors are part of the currently running binary, we need to
> +do the same setup when starting the real Barebox binary, as the PBL
> +setup vectors might get overwritten. To do this we trap into HYP mode
> +just before jumping to Barebox and then re-do the vector setup and
> +SVC switch as the first thing in Barebox proper.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/lowlevel.S | 5 +++++
> + arch/arm/cpu/start-pbl.c | 4 ++++
> + arch/arm/cpu/start.c | 5 +++++
> + arch/arm/cpu/uncompress.c | 4 ++++
> + 4 files changed, 18 insertions(+)
> +
> +diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
> +index 43665981e48b..3b52644e43e1 100644
> +--- a/arch/arm/cpu/lowlevel.S
> ++++ b/arch/arm/cpu/lowlevel.S
> +@@ -8,6 +8,11 @@ ENTRY(arm_cpu_lowlevel_init)
> + /* save lr, since it may be banked away with a processor mode change */
> + mov r2, lr
> +
> ++#ifdef CONFIG_CPU_32v7
> ++ /* careful: the hyp install corrupts r0 and r1 */
> ++ bl __hyp_install
> ++#endif
> ++
> + /* set the cpu to SVC32 mode, mask irq and fiq */
> + mrs r12, cpsr
> + eor r12, r12, #HYP_MODE
> +diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
> +index 16159d7f9d51..48a808645671 100644
> +--- a/arch/arm/cpu/start-pbl.c
> ++++ b/arch/arm/cpu/start-pbl.c
> +@@ -26,6 +26,7 @@
> + #include <asm/barebox-arm-head.h>
> + #include <asm-generic/memory_layout.h>
> + #include <asm/sections.h>
> ++#include <asm/secure.h>
> + #include <asm/cache.h>
> + #include <asm/mmu.h>
> + #include <asm/unaligned.h>
> +@@ -98,5 +99,8 @@ __noreturn void barebox_single_pbl_start(unsigned long membase,
> + else
> + barebox = (void *)barebox_base;
> +
> ++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
> ++ armv7_switch_to_hyp();
> ++
> + barebox(membase, memsize, boarddata);
> + }
> +diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
> +index 64bd942ad764..a79d64eaa6e6 100644
> +--- a/arch/arm/cpu/start.c
> ++++ b/arch/arm/cpu/start.c
> +@@ -24,6 +24,7 @@
> + #include <asm/barebox-arm-head.h>
> + #include <asm-generic/memory_layout.h>
> + #include <asm/sections.h>
> ++#include <asm/secure.h>
> + #include <asm/unaligned.h>
> + #include <asm/cache.h>
> + #include <asm/mmu.h>
> +@@ -147,6 +148,10 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
> + unsigned long barebox_base = arm_mem_barebox_image(membase,
> + endmem,
> + barebox_size);
> ++
> ++ if (IS_ENABLED(CONFIG_CPU_V7))
> ++ armv7_hyp_install();
> ++
> + if (IS_ENABLED(CONFIG_RELOCATABLE))
> + relocate_to_adr(barebox_base);
> +
> +diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
> +index 43b49b42120b..048bca0c9599 100644
> +--- a/arch/arm/cpu/uncompress.c
> ++++ b/arch/arm/cpu/uncompress.c
> +@@ -27,6 +27,7 @@
> + #include <asm/barebox-arm-head.h>
> + #include <asm-generic/memory_layout.h>
> + #include <asm/sections.h>
> ++#include <asm/secure.h>
> + #include <asm/cache.h>
> + #include <asm/mmu.h>
> + #include <asm/unaligned.h>
> +@@ -105,5 +106,8 @@ void __noreturn barebox_multi_pbl_start(unsigned long membase,
> +
> + pr_debug("jumping to uncompressed image at 0x%p\n", barebox);
> +
> ++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
> ++ armv7_switch_to_hyp();
> ++
> + barebox(membase, memsize, boarddata);
> + }
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> new file mode 100644
> index 0000000..9aa90b5
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> @@ -0,0 +1,41 @@
> +From: Enrico Joerns <ejo@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:44 +0100
> +Subject: [PATCH] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
> +
> +Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
> + arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
> + 2 files changed, 6 insertions(+)
> +
> +diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
> +index 6e375bc984de..3baed6525586 100644
> +--- a/arch/arm/boards/raspberry-pi/rpi-common.c
> ++++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> +@@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
> + const struct rpi_model rpi_models_new_scheme[] = {
> + RPI_MODEL(0, "Unknown model", NULL),
> + RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
> ++ RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
> ++ RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
> + };
> +
> + static int rpi_board_rev = 0;
> +diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
> +index 2b5aea88ee0a..0d1ac074e328 100644
> +--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
> ++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
> +@@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
> +
> + /* RPi 2 */
> + #define BCM2836_BOARD_REV_2_B 0x4
> ++/* RPi 3 */
> ++#define BCM2837_BOARD_REV_3_B 0x8
> ++/* Zero */
> ++#define BCM2835_BOARD_REV_ZERO 0x9
> +
> + /*
> + * 0x2..0xf from:
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> new file mode 100644
> index 0000000..8e8d76a
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> @@ -0,0 +1,141 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:45 +0100
> +Subject: [PATCH] ARM: rpi: add raspberry pi 3 support
> +
> +This adds basic support at the same feature level as the other
> +supported raspberry pi boards.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/boards/raspberry-pi/lowlevel.c | 14 ++++++++++++--
> + arch/arm/configs/rpi_defconfig | 2 ++
> + arch/arm/dts/Makefile | 1 +
> + arch/arm/dts/bcm2837-rpi-3.dts | 16 ++++++++++++++++
> + arch/arm/mach-bcm283x/Kconfig | 6 ++++++
> + arch/arm/mach-bcm283x/core.c | 1 +
> + images/Makefile.bcm283x | 4 ++++
> + 7 files changed, 42 insertions(+), 2 deletions(-)
> + create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts
> +
> +diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c
> +index cbc6caa4b9ed..34c9350920e9 100644
> +--- a/arch/arm/boards/raspberry-pi/lowlevel.c
> ++++ b/arch/arm/boards/raspberry-pi/lowlevel.c
> +@@ -1,7 +1,7 @@
> ++#include <asm/barebox-arm.h>
> ++#include <asm/cache.h>
> + #include <common.h>
> + #include <linux/sizes.h>
> +-#include <asm/barebox-arm.h>
> +-#include <asm/barebox-arm-head.h>
> + #include <mach/platform.h>
> +
> + extern char __dtb_bcm2835_rpi_start[];
> +@@ -23,3 +23,13 @@ ENTRY_FUNCTION(start_raspberry_pi2, r0, r1, r2)
> +
> + barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
> + }
> ++
> ++extern char __dtb_bcm2837_rpi_3_start[];
> ++ENTRY_FUNCTION(start_raspberry_pi3, r0, r1, r2)
> ++{
> ++ void *fdt = __dtb_bcm2837_rpi_3_start + get_runtime_offset();
> ++
> ++ arm_cpu_lowlevel_init();
> ++
> ++ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
> ++}
> +diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
> +index f3aef4290425..cd88b4ac751c 100644
> +--- a/arch/arm/configs/rpi_defconfig
> ++++ b/arch/arm/configs/rpi_defconfig
> +@@ -1,9 +1,11 @@
> + CONFIG_ARCH_BCM283X=y
> + CONFIG_MACH_RPI=y
> + CONFIG_MACH_RPI2=y
> ++CONFIG_MACH_RPI3=y
> + CONFIG_AEABI=y
> + CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> + CONFIG_ARM_UNWIND=y
> ++CONFIG_IMAGE_COMPRESSION_NONE=y
> + CONFIG_MMU=y
> + CONFIG_MALLOC_TLSF=y
> + CONFIG_KALLSYMS=y
> +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> +index 1caeca35b484..4e063902c635 100644
> +--- a/arch/arm/dts/Makefile
> ++++ b/arch/arm/dts/Makefile
> +@@ -71,6 +71,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
> + pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
> + pbl-dtb-$(CONFIG_MACH_RPI) += bcm2835-rpi.dtb.o
> + pbl-dtb-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
> ++pbl-dtb-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
> + pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
> + pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
> + pbl-dtb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-sdb.dtb.o
> +diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
> +new file mode 100644
> +index 000000000000..d6ffc369122c
> +--- /dev/null
> ++++ b/arch/arm/dts/bcm2837-rpi-3.dts
> +@@ -0,0 +1,16 @@
> ++#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
> ++
> ++/ {
> ++ chosen {
> ++ stdout-path = &uart0;
> ++ };
> ++
> ++ memory {
> ++ reg = <0x0 0x0>;
> ++ };
> ++};
> ++
> ++&uart0 {
> ++ status = "okay";
> ++ /delete-node/ bluetooth;
> ++};
> +diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
> +index 1457f114ccaa..af2f88c47acb 100644
> +--- a/arch/arm/mach-bcm283x/Kconfig
> ++++ b/arch/arm/mach-bcm283x/Kconfig
> +@@ -19,6 +19,12 @@ config MACH_RPI2
> + select CPU_V7
> + select MACH_RPI_COMMON
> +
> ++config MACH_RPI3
> ++ bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
> ++ select CPU_V7
> ++ select MACH_RPI_COMMON
> ++ select ARM_SECURE_MONITOR
> ++
> + endmenu
> +
> + config MACH_RPI_DEBUG_UART_BASE
> +diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-bcm283x/core.c
> +index fddcb0d1a1d4..26f0996b1cb8 100644
> +--- a/arch/arm/mach-bcm283x/core.c
> ++++ b/arch/arm/mach-bcm283x/core.c
> +@@ -41,6 +41,7 @@ static int bcm2835_clk_init(void)
> + clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
> + clk_register_clkdev(clk, NULL, "uart0-pl0110");
> + clk_register_clkdev(clk, NULL, "20201000.serial");
> ++ clk_register_clkdev(clk, NULL, "3f201000.serial");
> +
> + clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
> + clk_register_clkdev(clk, NULL, "bcm2835-cs");
> +diff --git a/images/Makefile.bcm283x b/images/Makefile.bcm283x
> +index d59ef043f05c..d14e648926ac 100644
> +--- a/images/Makefile.bcm283x
> ++++ b/images/Makefile.bcm283x
> +@@ -9,3 +9,7 @@ image-$(CONFIG_MACH_RPI) += barebox-raspberry-pi-1.img
> + pblx-$(CONFIG_MACH_RPI2) += start_raspberry_pi2
> + FILE_barebox-raspberry-pi-2.img = start_raspberry_pi2.pblx
> + image-$(CONFIG_MACH_RPI2) += barebox-raspberry-pi-2.img
> ++
> ++pblx-$(CONFIG_MACH_RPI3) += start_raspberry_pi3
> ++FILE_barebox-raspberry-pi-3.img = start_raspberry_pi3.pblx
> ++image-$(CONFIG_MACH_RPI3) += barebox-raspberry-pi-3.img
> +\ No newline at end of file
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> new file mode 100644
> index 0000000..da498ba
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> @@ -0,0 +1,25 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:46 +0100
> +Subject: [PATCH] ARM: rpi: autosize malloc area
> +
> +Autosize the malloc area according to the available RAM size.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/configs/rpi_defconfig | 1 +
> + 1 file changed, 1 insertion(+)
> +
> +diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
> +index cd88b4ac751c..2bb615849324 100644
> +--- a/arch/arm/configs/rpi_defconfig
> ++++ b/arch/arm/configs/rpi_defconfig
> +@@ -7,6 +7,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> + CONFIG_ARM_UNWIND=y
> + CONFIG_IMAGE_COMPRESSION_NONE=y
> + CONFIG_MMU=y
> ++CONFIG_MALLOC_SIZE=0x0
> + CONFIG_MALLOC_TLSF=y
> + CONFIG_KALLSYMS=y
> + CONFIG_PROMPT="R-Pi> "
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> similarity index 93%
> rename from configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> rename to configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> index 06c356b..9f99a39 100644
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> @@ -26,10 +26,10 @@ Forwarded: id:20170627190317.19253-1-uwe@kleine-koenig.org
> create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> -index 30f4c299f1a1..f70fbac8f379 100644
> +index c737cf34138c..9aee9bf0993a 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> -@@ -135,6 +135,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
> +@@ -137,6 +137,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
> obj-$(CONFIG_MACH_TX53) += karo-tx53/
> obj-$(CONFIG_MACH_TX6X) += karo-tx6x/
> obj-$(CONFIG_MACH_UDOO) += udoo/
> @@ -254,10 +254,10 @@ index 000000000000..e78c2685fd78
> + imx6sx_barebox_entry(fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> -index e60e0ea0c6be..b87e27c8c263 100644
> +index 4e063902c635..3d34a78f7878 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> -@@ -93,6 +93,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
> +@@ -97,6 +97,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
> pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
> pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-bb.dtb.o
> pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
> @@ -276,10 +276,10 @@ index 000000000000..9203d40207c5
> +/{
> +};
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> -index 9052a94ea071..9ec95bb6df09 100644
> +index 63a92bd5bd1d..ab515ecf2286 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> -@@ -377,6 +377,10 @@ config MACH_UDOO
> +@@ -380,6 +380,10 @@ config MACH_UDOO
> bool "Freescale i.MX6 UDOO Board"
> select ARCH_IMX6
>
> @@ -291,22 +291,22 @@ index 9052a94ea071..9ec95bb6df09 100644
> bool "Variscite i.MX6 Quad SOM"
> select ARCH_IMX6
> diff --git a/arch/arm/mach-imx/include/mach/esdctl.h b/arch/arm/mach-imx/include/mach/esdctl.h
> -index 66dcc8974cfb..bd6092febca4 100644
> +index bc6c7339535e..18c4a2836007 100644
> --- a/arch/arm/mach-imx/include/mach/esdctl.h
> +++ b/arch/arm/mach-imx/include/mach/esdctl.h
> -@@ -137,6 +137,7 @@ void __noreturn imx51_barebox_entry(void *boarddata);
> - void __noreturn imx53_barebox_entry(void *boarddata);
> - void __noreturn imx6q_barebox_entry(void *boarddata);
> - void __noreturn imx6ul_barebox_entry(void *boarddata);
> +@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void *boarddata);
> + void __noreturn vf610_barebox_entry(void *boarddata);
> + void __noreturn imx8mq_barebox_entry(void *boarddata);
> + void __noreturn imx7d_barebox_entry(void *boarddata);
> +#define imx6sx_barebox_entry(boarddata) imx6ul_barebox_entry(boarddata)
> void imx_esdctl_disable(void);
> #endif
>
> diff --git a/images/Makefile.imx b/images/Makefile.imx
> -index 90da95d4d025..6420490811f9 100644
> +index 341ce8506d88..c32f78b7e184 100644
> --- a/images/Makefile.imx
> +++ b/images/Makefile.imx
> -@@ -275,6 +275,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
> +@@ -271,6 +271,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
> FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblx.imximg
> image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
>
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> new file mode 100644
> index 0000000..bd444f0
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> @@ -0,0 +1,22 @@
> +From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> +Date: Thu, 22 Nov 2018 12:09:22 +0100
> +Subject: [PATCH] Release pengutronix_multiv7/20181122-1
> +
> +Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> +---
> + Makefile | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/Makefile b/Makefile
> +index 60a5d5ce11f4..b55ca4b03129 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -1,7 +1,7 @@
> + VERSION = 2018
> + PATCHLEVEL = 11
> + SUBLEVEL = 0
> +-EXTRAVERSION =
> ++EXTRAVERSION =-20181122-1
> + NAME = None
> +
> + # *DOCUMENTATION*
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/series b/configs/platform-v7a/patches/barebox-2018.11.0/series
> new file mode 100644
> index 0000000..e056b0c
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/series
> @@ -0,0 +1,24 @@
> +# umpf-base: v2018.11.0
> +# umpf-name: pengutronix_multiv7
> +# umpf-version: pengutronix_multiv7/20181122-1
> +# umpf-topic: v2018.11.0/customers/pengutronix/rpi3
> +# umpf-hashinfo: 1bdd9ef32c272ba5501e24ba643107855dd5149c
> +# umpf-topic-range: d1f223eddbcde31ba2a3f34fc0a1a14f40ea7130..1bdd9ef32c272ba5501e24ba643107855dd5149c
> +0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> +0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> +0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> +0004-ARM-add-file-for-HYP-mode-related-setup.patch
> +0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> +0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> +0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> +0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> +0009-ARM-rpi-add-raspberry-pi-3-support.patch
> +0010-ARM-rpi-autosize-malloc-area.patch
> +# umpf-topic: v2018.11.0/customers/pengutronix/udoo-neo
> +# umpf-hashinfo: c5f2e150d7e8d5439458df1a2cab71b25fc36e19
> +# umpf-topic-range: 1bdd9ef32c272ba5501e24ba643107855dd5149c..8cacc208f8f6c9071113b12a618a54d7e80b1694
> +0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> +# umpf-release: pengutronix_multiv7/20181122-1
> +# umpf-topic-range: 8cacc208f8f6c9071113b12a618a54d7e80b1694..45c64f6b4690a6b51be1c487de1ffec6472704e1
> +0201-Release-pengutronix_multiv7-20181122-1.patch
> +# umpf-end
> diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
> index cdea840..e2c8ac1 100644
> --- a/configs/platform-v7a/platformconfig
> +++ b/configs/platform-v7a/platformconfig
> @@ -166,6 +166,8 @@ PTXCONF_BAREBOX_AM335X=y
> PTXCONF_BAREBOX_MX6=y
> PTXCONF_BAREBOX_RPI2=y
> PTXCONF_BAREBOX_RPI2_NEEDS_HOST_LZOP=y
> +PTXCONF_BAREBOX_RPI3=y
> +# PTXCONF_BAREBOX_RPI3_NEEDS_HOST_LZOP is not set
> PTXCONF_BAREBOX_VEXPRESS=y
> PTXCONF_BAREBOX_ARCH_STRING="arm"
> # PTXCONF_BAREBOX is not set
> diff --git a/configs/platform-v7a/rules/barebox-am335x-mlo.make b/configs/platform-v7a/rules/barebox-am335x-mlo.make
> index e71d057..6835d35 100644
> --- a/configs/platform-v7a/rules/barebox-am335x-mlo.make
> +++ b/configs/platform-v7a/rules/barebox-am335x-mlo.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X_MLO) += barebox-am335x-mlo
> #
> # Paths and names
> #
> -BAREBOX_AM335X_MLO_VERSION := 2018.05.0
> -BAREBOX_AM335X_MLO_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_AM335X_MLO_VERSION := 2018.11.0
> +BAREBOX_AM335X_MLO_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_AM335X_MLO := barebox-$(BAREBOX_AM335X_MLO_VERSION)
> BAREBOX_AM335X_MLO_SUFFIX := tar.bz2
> BAREBOX_AM335X_MLO_DIR := $(BUILDDIR)/barebox-am335x-mlo-$(BAREBOX_AM335X_MLO_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-am335x.make b/configs/platform-v7a/rules/barebox-am335x.make
> index 2c35ae1..8b3c2a0 100644
> --- a/configs/platform-v7a/rules/barebox-am335x.make
> +++ b/configs/platform-v7a/rules/barebox-am335x.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X) += barebox-am335x
> #
> # Paths and names
> #
> -BAREBOX_AM335X_VERSION := 2018.05.0
> -BAREBOX_AM335X_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_AM335X_VERSION := 2018.11.0
> +BAREBOX_AM335X_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_AM335X := barebox-$(BAREBOX_AM335X_VERSION)
> BAREBOX_AM335X_SUFFIX := tar.bz2
> BAREBOX_AM335X_DIR := $(BUILDDIR)/barebox-am335x-$(BAREBOX_AM335X_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-mx6.make b/configs/platform-v7a/rules/barebox-mx6.make
> index 7d7c2ce..3b86ea0 100644
> --- a/configs/platform-v7a/rules/barebox-mx6.make
> +++ b/configs/platform-v7a/rules/barebox-mx6.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_MX6) += barebox-mx6
> #
> # Paths and names
> #
> -BAREBOX_MX6_VERSION := 2018.05.0
> -BAREBOX_MX6_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_MX6_VERSION := 2018.11.0
> +BAREBOX_MX6_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_MX6 := barebox-$(BAREBOX_MX6_VERSION)
> BAREBOX_MX6_SUFFIX := tar.bz2
> BAREBOX_MX6_DIR := $(BUILDDIR)/barebox-mx6-$(BAREBOX_MX6_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-rpi2.make b/configs/platform-v7a/rules/barebox-rpi2.make
> index cf9fc00..41990a0 100644
> --- a/configs/platform-v7a/rules/barebox-rpi2.make
> +++ b/configs/platform-v7a/rules/barebox-rpi2.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_RPI2) += barebox-rpi2
> #
> # Paths and names
> #
> -BAREBOX_RPI2_VERSION := 2018.05.0
> -BAREBOX_RPI2_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_RPI2_VERSION := 2018.11.0
> +BAREBOX_RPI2_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_RPI2 := barebox-$(BAREBOX_RPI2_VERSION)
> BAREBOX_RPI2_SUFFIX := tar.bz2
> BAREBOX_RPI2_DIR := $(BUILDDIR)/barebox-rpi2-$(BAREBOX_RPI2_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-rpi3.make b/configs/platform-v7a/rules/barebox-rpi3.make
> new file mode 100644
> index 0000000..35b7e5b
> --- /dev/null
> +++ b/configs/platform-v7a/rules/barebox-rpi3.make
> @@ -0,0 +1,104 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2016 by Alexander Aring <aar@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_BAREBOX_RPI3) += barebox-rpi3
> +
> +#
> +# Paths and names
> +#
> +BAREBOX_RPI3_VERSION := 2018.11.0
> +BAREBOX_RPI3_MD5 := 1472eae302647d1cf7f1c561a6380b43
> +BAREBOX_RPI3 := barebox-$(BAREBOX_RPI3_VERSION)
> +BAREBOX_RPI3_SUFFIX := tar.bz2
> +BAREBOX_RPI3_DIR := $(BUILDDIR)/barebox-rpi3-$(BAREBOX_RPI3_VERSION)
> +BAREBOX_RPI3_CONFIG := $(call ptx/in-platformconfigdir, barebox-rpi3.config)
> +BAREBOX_RPI3_LICENSE := GPL-2.0
> +BAREBOX_RPI3_URL := $(call barebox-url, BAREBOX_RPI3)
> +BAREBOX_RPI3_SOURCE := $(SRCDIR)/$(BAREBOX_RPI3).$(BAREBOX_RPI3_SUFFIX)
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +BAREBOX_RPI3_WRAPPER_BLACKLIST := \
> + TARGET_HARDEN_RELRO \
> + TARGET_HARDEN_BINDNOW \
> + TARGET_HARDEN_PIE \
> + TARGET_DEBUG \
> + TARGET_BUILD_ID
> +
> +BAREBOX_RPI3_CONF_ENV := KCONFIG_NOTIMESTAMP=1
> +BAREBOX_RPI3_CONF_OPT := $(call barebox-opts, BAREBOX_RPI3)
> +
> +BAREBOX_RPI3_MAKE_ENV := $(BAREBOX_RPI3_CONF_ENV)
> +BAREBOX_RPI3_MAKE_OPT := $(BAREBOX_RPI3_CONF_OPT)
> +
> +BAREBOX_RPI3_IMAGES := images/barebox-raspberry-pi-3.img
> +BAREBOX_RPI3_IMAGES := $(addprefix $(BAREBOX_RPI3_DIR)/,$(BAREBOX_RPI3_IMAGES))
> +
> +ifdef PTXCONF_BAREBOX_RPI3
> +$(BAREBOX_RPI3_CONFIG):
> + @echo
> + @echo "****************************************************************************"
> + @echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-rpi3'"
> + @echo "****************************************************************************"
> + @echo
> + @echo
> + @exit 1
> +endif
> +
> +$(STATEDIR)/barebox-rpi3.prepare: $(BAREBOX_RPI3_CONFIG)
> + @$(call targetinfo)
> + @rm -f "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
> + @ln -s "$(call ptx/in-platformconfigdir, barebox-rpi3-defaultenv)" \
> + "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
> + @$(call world/prepare, BAREBOX_RPI3)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox-rpi3.install:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Targetinstall
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox-rpi3.targetinstall:
> + @$(call targetinfo)
> + @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
> + install -m 644 \
> + $(image) $(IMAGEDIR)/$(notdir $(image))-rpi3;)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Clean
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox-rpi3.clean:
> + @$(call targetinfo)
> + @$(call clean_pkg, BAREBOX_RPI3)
> + @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
> + rm -fv $(IMAGEDIR)/$(notdir $(image));)
> +
> +# ----------------------------------------------------------------------------
> +# oldconfig / menuconfig
> +# ----------------------------------------------------------------------------
> +
> +barebox-rpi3_oldconfig barebox-rpi3_menuconfig barebox-rpi3_nconfig: $(STATEDIR)/barebox-rpi3.extract
> + @$(call world/kconfig, BAREBOX_RPI3, $(subst barebox-rpi3_,,$@))
> +
> +# vim: syntax=make
> diff --git a/configs/platform-v7a/rules/barebox-vexpress.make b/configs/platform-v7a/rules/barebox-vexpress.make
> index 0266cbe..f69b6c5 100644
> --- a/configs/platform-v7a/rules/barebox-vexpress.make
> +++ b/configs/platform-v7a/rules/barebox-vexpress.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_VEXPRESS) += barebox-vexpress
> #
> # Paths and names
> #
> -BAREBOX_VEXPRESS_VERSION := 2018.05.0
> -BAREBOX_VEXPRESS_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_VEXPRESS_VERSION := 2018.11.0
> +BAREBOX_VEXPRESS_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_VEXPRESS := barebox-$(BAREBOX_VEXPRESS_VERSION)
> BAREBOX_VEXPRESS_SUFFIX := tar.bz2
> BAREBOX_VEXPRESS_DIR := $(BUILDDIR)/barebox-vexpress-$(BAREBOX_VEXPRESS_VERSION)
> --
> 2.19.1
>
>
> _______________________________________________
> DistroKit mailing list
> DistroKit@pengutronix.de
--
Roland Hieber | r.hieber@pengutronix.de |
Pengutronix e.K. | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
next prev parent reply other threads:[~2018-12-05 13:15 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-05 7:55 Rouven Czerwinski
2018-12-05 13:15 ` Roland Hieber [this message]
2018-12-05 13:20 ` Rouven Czerwinski
2018-12-06 14:39 ` [DistroKit] [PATCH v2] " Rouven Czerwinski
2018-12-06 21:04 ` Alexander Dahl
2018-12-07 13:16 ` Roland Hieber
2018-12-10 8:56 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181205131517.642rnuvsq3sxqzr6@pengutronix.de \
--to=r.hieber@pengutronix.de \
--cc=distrokit@pengutronix.de \
--cc=r.czerwinski@pengutronix.de \
--cc=rouven@czerwinskis.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox