* [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0
@ 2018-12-05 7:55 Rouven Czerwinski
2018-12-05 13:15 ` Roland Hieber
2018-12-06 14:39 ` [DistroKit] [PATCH v2] " Rouven Czerwinski
0 siblings, 2 replies; 7+ messages in thread
From: Rouven Czerwinski @ 2018-12-05 7:55 UTC (permalink / raw)
To: distrokit; +Cc: Rouven Czerwinski, Rouven Czerwinski
Drop the beaglebone patch, it will be resurrected in a distrokit-deployment
layer.
We also add the patch series for the rpi3 to barebox, it can be dropped
in the next release.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
.../platform-v7a/barebox-am335x-mlo.config | 22 +-
configs/platform-v7a/barebox-am335x.config | 24 +-
configs/platform-v7a/barebox-mx6.config | 32 +-
configs/platform-v7a/barebox-rpi2.config | 23 +-
.../barebox-rpi3-defaultenv/boot/9p | 10 +
.../barebox-rpi3-defaultenv/init/bootsource | 13 +
.../nv/linux.bootargs.loglevel | 1 +
configs/platform-v7a/barebox-rpi3.config | 600 ++++++++++++++++++
configs/platform-v7a/barebox-vexpress.config | 23 +-
...ne-add-state-entry-for-mmc0-and-mmc1.patch | 35 -
...ease-pengutronix-multi_v7-20180515-1.patch | 22 -
.../patches/barebox-2018.05.0/series | 15 -
...ort-opcode-helpers-from-Linux-kernel.patch | 299 +++++++++
...tch-from-HYP-to-SVC-mode-if-required.patch | 88 +++
...-monitor-code-to-be-built-without-PS.patch | 37 ++
...-add-file-for-HYP-mode-related-setup.patch | 193 ++++++
...-install-secure-monitor-when-entered.patch | 30 +
...tarting-kernel-in-HYP-mode-when-ente.patch | 31 +
...HYP-vectors-at-PBL-and-Barebox-entry.patch | 105 +++
...sion-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch | 41 ++
...9-ARM-rpi-add-raspberry-pi-3-support.patch | 141 ++++
.../0010-ARM-rpi-autosize-malloc-area.patch | 25 +
...RM-imx-add-support-for-Udoo-Neo-full.patch | 26 +-
...lease-pengutronix_multiv7-20181122-1.patch | 22 +
.../patches/barebox-2018.11.0/series | 24 +
configs/platform-v7a/platformconfig | 2 +
.../rules/barebox-am335x-mlo.make | 4 +-
.../platform-v7a/rules/barebox-am335x.make | 4 +-
configs/platform-v7a/rules/barebox-mx6.make | 4 +-
configs/platform-v7a/rules/barebox-rpi2.make | 4 +-
configs/platform-v7a/rules/barebox-rpi3.make | 104 +++
.../platform-v7a/rules/barebox-vexpress.make | 4 +-
32 files changed, 1905 insertions(+), 103 deletions(-)
create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
create mode 100644 configs/platform-v7a/barebox-rpi3.config
delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/series
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
rename configs/platform-v7a/patches/{barebox-2018.05.0 => barebox-2018.11.0}/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch (93%)
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/series
create mode 100644 configs/platform-v7a/rules/barebox-rpi3.make
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index 6cebecd..90adc2c 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -185,6 +185,7 @@ CONFIG_OF_GPIO=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
@@ -337,6 +338,15 @@ CONFIG_BUS_OMAP_GPMC=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
CONFIG_FS_RAMFS=y
@@ -398,3 +408,13 @@ CONFIG_XYMODEM=y
CONFIG_CRC16=y
# CONFIG_DIGEST is not set
# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 0c78012..0c3d7e5 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -408,6 +408,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
@@ -436,6 +437,7 @@ CONFIG_DRIVER_NET_CPSW=y
#
# CONFIG_AR8327N_PHY is not set
# CONFIG_AT803X_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -587,6 +589,7 @@ CONFIG_LED_GPIO_OF=y
# CONFIG_LED_GPIO_RGB is not set
# CONFIG_LED_GPIO_BICOLOR is not set
CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
#
# EEPROM support
@@ -649,6 +652,15 @@ CONFIG_BUS_OMAP_GPMC=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -732,3 +744,13 @@ CONFIG_DIGEST_HMAC_GENERIC=y
# CONFIG_DIGEST_SHA256_ARM is not set
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_KEYSTORE=y
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 980b97b..536cbfe 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -94,13 +94,17 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_VARISCITE_MX6 is not set
# CONFIG_MACH_GW_VENTANA is not set
# CONFIG_MACH_CM_FX6 is not set
+# CONFIG_MACH_ADVANTECH_ROM_742X is not set
# CONFIG_MACH_WARP7 is not set
# CONFIG_MACH_VF610_TWR is not set
+# CONFIG_MACH_ZII_RDU1 is not set
# CONFIG_MACH_ZII_RDU2 is not set
# CONFIG_MACH_ZII_VF610_DEV is not set
+# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
# CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
# CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
# CONFIG_MACH_NXP_IMX6ULL_EVK is not set
+# CONFIG_MACH_NXP_IMX8MQ_EVK is not set
#
# Board specific settings
@@ -111,10 +115,7 @@ CONFIG_MACH_UDOO_NEO=y
#
CONFIG_IMX_IIM=y
CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_IMX_OCOTP=y
-# CONFIG_IMX_OCOTP_WRITE is not set
# CONFIG_HABV4 is not set
-# CONFIG_ARCH_IMX_USBLOADER is not set
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
@@ -464,6 +465,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_IMX=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -493,6 +495,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
#
# CONFIG_AR8327N_PHY is not set
CONFIG_AT803X_PHY=y
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
@@ -681,6 +684,7 @@ CONFIG_LED_GPIO_OF=y
# CONFIG_LED_GPIO_RGB is not set
# CONFIG_LED_GPIO_BICOLOR is not set
CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
#
# EEPROM support
@@ -762,6 +766,15 @@ CONFIG_USB_NOP_XCEIV=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -854,3 +867,14 @@ CONFIG_DIGEST_HMAC_GENERIC=y
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set
CONFIG_CRYPTO_KEYSTORE=y
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
+# CONFIG_ARCH_IMX_USBLOADER is not set
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 74c52e9..0e2622f 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -54,6 +54,7 @@ CONFIG_MACH_RPI_COMMON=y
#
# CONFIG_MACH_RPI is not set
CONFIG_MACH_RPI2=y
+# CONFIG_MACH_RPI3 is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
@@ -369,6 +370,7 @@ CONFIG_ARM_AMBA=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_SERIAL_AMBA_PL011=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -499,6 +501,15 @@ CONFIG_REGULATOR_BCM283X=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -575,3 +586,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set
# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
new file mode 100644
index 0000000..264ffec
--- /dev/null
+++ b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+addpart /dev/nor0 "8M@32M(kernel)"
+addpart /dev/nor0 "512k@40M(dtb)"
+global.bootm.image="/dev/nor0.kernel"
+global.bootm.oftree="/dev/nor0.dtb"
+
+global linux.bootargs.base="console=ttyAMA0,115200 loglevel=5 ptxdist-devel"
+
+global linux.bootargs.root="root=/dev/root rootfstype=9p rootflags=trans=virtio"
\ No newline at end of file
diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
new file mode 100644
index 0000000..4de7163
--- /dev/null
+++ b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
@@ -0,0 +1,13 @@
+#!/bin/sh
+
+if [ -n "$nv.boot.default" ]; then
+ exit
+fi
+
+if [ $bootsource = mmc ]; then
+ global.boot.default="bootchooser net"
+elif [ $bootsource = net ]; then
+ global.boot.default="net bootchooser"
+else
+ global.boot.default="disk0.1 net"
+fi
diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
new file mode 100644
index 0000000..705752c
--- /dev/null
+++ b/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
@@ -0,0 +1 @@
+loglevel=5 systemd.log_level=warning systemd.show_status=auto
diff --git a/configs/platform-v7a/barebox-rpi3.config b/configs/platform-v7a/barebox-rpi3.config
new file mode 100644
index 0000000..0336bdf
--- /dev/null
+++ b/configs/platform-v7a/barebox-rpi3.config
@@ -0,0 +1,600 @@
+#
+# Automatically generated file; DO NOT EDIT.
+# Barebox/arm 2018.11.0-20181122-1 Configuration
+#
+CONFIG_ARM=y
+CONFIG_ARM_LINUX=y
+CONFIG_TEXT_BASE=0x0
+
+#
+# System Type
+#
+# CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCM283X=y
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_DIGIC is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_HIGHBANK is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_MVEBU is not set
+# CONFIG_ARCH_MXS is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_SOCFPGA is not set
+# CONFIG_ARCH_S3C24xx is not set
+# CONFIG_ARCH_S5PCxx is not set
+# CONFIG_ARCH_S3C64xx is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
+# CONFIG_ARCH_TEGRA is not set
+# CONFIG_ARCH_UEMD is not set
+# CONFIG_ARCH_ZYNQ is not set
+# CONFIG_ARCH_QEMU is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+
+#
+# processor features
+#
+# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
+CONFIG_ARCH_TEXT_BASE=0x0
+CONFIG_MACH_RPI_COMMON=y
+
+#
+# select Broadcom BCM283X boards to be built
+#
+# CONFIG_MACH_RPI is not set
+# CONFIG_MACH_RPI2 is not set
+CONFIG_MACH_RPI3=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+CONFIG_AEABI=y
+# CONFIG_THUMB2_BAREBOX is not set
+# CONFIG_ARM_BOARD_APPEND_ATAG is not set
+
+#
+# ARM specific settings
+#
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_EXCEPTIONS=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_SEMIHOSTING is not set
+CONFIG_ARM_SMCCC=y
+CONFIG_ARM_SECURE_MONITOR=y
+# CONFIG_ARM_PSCI is not set
+CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
+CONFIG_GREGORIAN_CALENDER=y
+CONFIG_HAS_KALLSYMS=y
+CONFIG_HAS_MODULES=y
+CONFIG_HAS_CACHE=y
+CONFIG_HAS_DMA=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_BLOCK=y
+CONFIG_BLOCK_WRITE=y
+CONFIG_FILETYPE=y
+CONFIG_BINFMT=y
+CONFIG_UIMAGE=y
+CONFIG_STDDEV=y
+CONFIG_BOOT=y
+
+#
+# General Settings
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_BANNER=y
+CONFIG_MEMINFO=y
+CONFIG_ENVIRONMENT_VARIABLES=y
+CONFIG_GLOBALVAR=y
+CONFIG_NVVAR=y
+
+#
+# memory layout
+#
+CONFIG_HAVE_PBL_IMAGE=y
+CONFIG_HAVE_PBL_MULTI_IMAGES=y
+CONFIG_HAVE_IMAGE_COMPRESSION=y
+CONFIG_PBL_IMAGE=y
+CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_PBL_RELOCATABLE=y
+CONFIG_IMAGE_COMPRESSION=y
+# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
+# CONFIG_IMAGE_COMPRESSION_LZO is not set
+# CONFIG_IMAGE_COMPRESSION_GZIP is not set
+# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
+CONFIG_IMAGE_COMPRESSION_NONE=y
+CONFIG_MMU=y
+CONFIG_MMU_EARLY=y
+CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
+CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
+CONFIG_BAREBOX_MAX_PBLX_SIZE=0xffffffff
+CONFIG_STACK_SIZE=0x8000
+CONFIG_MALLOC_SIZE=0x0
+# CONFIG_EXPERIMENTAL is not set
+# CONFIG_MALLOC_DLMALLOC is not set
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_HANG is not set
+CONFIG_PROMPT="R-Pi> "
+CONFIG_BAUDRATE=115200
+CONFIG_CBSIZE=1024
+CONFIG_SHELL_HUSH=y
+# CONFIG_SHELL_SIMPLE is not set
+# CONFIG_SHELL_NONE is not set
+CONFIG_GLOB=y
+CONFIG_GLOB_SORT=y
+CONFIG_PROMPT_HUSH_PS2="> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_PASSWORD=y
+CONFIG_PASSWORD_DEFAULT=""
+CONFIG_PASSWD_SUM_MD5=y
+# CONFIG_PASSWD_SUM_SHA1 is not set
+# CONFIG_PASSWD_SUM_SHA256 is not set
+# CONFIG_PASSWD_SUM_SHA512 is not set
+# CONFIG_PASSWD_CRYPTO_PBKDF2 is not set
+CONFIG_DYNAMIC_CRC_TABLE=y
+CONFIG_ERRNO_MESSAGES=y
+CONFIG_TIMESTAMP=y
+CONFIG_BOOTM=y
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+# CONFIG_BOOTM_OFTREE_UIMAGE is not set
+# CONFIG_BOOTM_AIMAGE is not set
+# CONFIG_BOOTM_FITIMAGE is not set
+CONFIG_BLSPEC=y
+CONFIG_FLEXIBLE_BOOTARGS=y
+# CONFIG_IMD is not set
+# CONFIG_KERNEL_INSTALL_TARGET is not set
+CONFIG_CONSOLE_FULL=y
+# CONFIG_CONSOLE_SIMPLE is not set
+# CONFIG_CONSOLE_NONE is not set
+CONFIG_CONSOLE_ACTIVATE_FIRST=y
+# CONFIG_CONSOLE_ACTIVATE_ALL is not set
+# CONFIG_CONSOLE_ACTIVATE_NONE is not set
+# CONFIG_CONSOLE_ALLOW_COLOR is not set
+# CONFIG_PBL_CONSOLE is not set
+# CONFIG_CONSOLE_RATP is not set
+CONFIG_PARTITION=y
+CONFIG_PARTITION_DISK=y
+CONFIG_PARTITION_DISK_DOS=y
+# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_ENV_HANDLING=y
+CONFIG_DEFAULT_ENVIRONMENT=y
+CONFIG_DEFAULT_COMPRESSION_NONE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+# CONFIG_BAREBOXENV_TARGET is not set
+# CONFIG_BAREBOXCRC32_TARGET is not set
+CONFIG_POLLER=y
+# CONFIG_STATE is not set
+# CONFIG_BOOTCHOOSER is not set
+# CONFIG_RESET_SOURCE is not set
+
+#
+# Debugging
+#
+CONFIG_COMPILE_LOGLEVEL=6
+CONFIG_DEFAULT_LOGLEVEL=7
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_DEBUG_INITCALLS is not set
+CONFIG_HAS_DEBUG_LL=y
+CONFIG_COMMAND_SUPPORT=y
+CONFIG_COMPILE_HASH=y
+CONFIG_COMPILE_MEMORY=y
+
+#
+# Commands
+#
+
+#
+# Information
+#
+CONFIG_CMD_ARM_CPUINFO=y
+CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_DMESG is not set
+CONFIG_CMD_DRVINFO=y
+CONFIG_CMD_HELP=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+# CONFIG_CMD_IMD is not set
+CONFIG_CMD_MEMINFO=y
+# CONFIG_CMD_ARM_MMUINFO is not set
+# CONFIG_CMD_REGULATOR is not set
+CONFIG_CMD_VERSION=y
+# CONFIG_CMD_MMC_EXTCSD is not set
+
+#
+# Boot
+#
+CONFIG_CMD_BOOT=y
+CONFIG_CMD_BOOTM=y
+CONFIG_CMD_BOOTU=y
+# CONFIG_CMD_BOOTZ is not set
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADB=y
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+
+#
+# Partition
+#
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_AUTOMOUNT=y
+CONFIG_CMD_MOUNT=y
+CONFIG_CMD_UMOUNT=y
+
+#
+# Environment
+#
+CONFIG_CMD_NV=y
+CONFIG_CMD_EXPORT=y
+# CONFIG_CMD_DEFAULTENV is not set
+CONFIG_CMD_GLOBAL=y
+# CONFIG_CMD_LOADENV is not set
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+
+#
+# File
+#
+CONFIG_CMD_BASENAME=y
+CONFIG_CMD_CAT=y
+CONFIG_CMD_CD=y
+CONFIG_CMD_CP=y
+# CONFIG_CMD_CMP is not set
+CONFIG_CMD_DIGEST=y
+CONFIG_CMD_DIRNAME=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_LS=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MKDIR=y
+CONFIG_CMD_PWD=y
+CONFIG_CMD_READLINK=y
+CONFIG_CMD_RM=y
+CONFIG_CMD_RMDIR=y
+# CONFIG_CMD_SHA1SUM is not set
+# CONFIG_CMD_SHA224SUM is not set
+# CONFIG_CMD_SHA256SUM is not set
+# CONFIG_CMD_SHA384SUM is not set
+# CONFIG_CMD_SHA512SUM is not set
+CONFIG_CMD_UNCOMPRESS=y
+
+#
+# Shell scripting
+#
+CONFIG_CMD_FALSE=y
+CONFIG_CMD_GETOPT=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+# CONFIG_CMD_READF is not set
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_TEST=y
+CONFIG_CMD_TRUE=y
+
+#
+# Console and Framebuffer interaction
+#
+CONFIG_CMD_CLEAR=y
+CONFIG_CMD_ECHO=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_LOGIN=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+# CONFIG_CMD_MENUTREE is not set
+CONFIG_CMD_PASSWD=y
+CONFIG_PASSWD_MODE_HIDE=y
+# CONFIG_PASSWD_MODE_STAR is not set
+# CONFIG_PASSWD_MODE_CLEAR is not set
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+
+#
+# Memory
+#
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MD=y
+CONFIG_CMD_MEMCMP=y
+CONFIG_CMD_MEMCPY=y
+CONFIG_CMD_MEMSET=y
+# CONFIG_CMD_MEMTEST is not set
+CONFIG_CMD_MM=y
+CONFIG_CMD_MW=y
+
+#
+# Hardware manipulation
+#
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_LED is not set
+# CONFIG_CMD_POWEROFF is not set
+# CONFIG_CMD_SPI is not set
+# CONFIG_CMD_LED_TRIGGER is not set
+CONFIG_CMD_WD=y
+CONFIG_CMD_WD_DEFAULT_TIMOUT=0
+
+#
+# Miscellaneous
+#
+# CONFIG_CMD_2048 is not set
+# CONFIG_CMD_BAREBOX_UPDATE is not set
+# CONFIG_CMD_FIRMWARELOAD is not set
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP_STATUS is not set
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+# CONFIG_CMD_DHRYSTONE is not set
+# CONFIG_CMD_SPD_DECODE is not set
+# CONFIG_CMD_SEED is not set
+# CONFIG_NET is not set
+
+#
+# Drivers
+#
+CONFIG_OFTREE=y
+CONFIG_OFTREE_MEM_GENERIC=y
+CONFIG_DTC=y
+CONFIG_OFDEVICE=y
+CONFIG_OF_GPIO=y
+# CONFIG_OF_BAREBOX_DRIVERS is not set
+# CONFIG_AIODEV is not set
+CONFIG_ARM_AMBA=y
+
+#
+# serial drivers
+#
+# CONFIG_SERIAL_DEV_BUS is not set
+# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+CONFIG_SERIAL_AMBA_PL011=y
+# CONFIG_DRIVER_SERIAL_NS16550 is not set
+# CONFIG_DRIVER_SERIAL_CADENCE is not set
+
+#
+# SPI drivers
+#
+CONFIG_SPI=y
+# CONFIG_DRIVER_SPI_GPIO is not set
+# CONFIG_I2C is not set
+# CONFIG_MTD is not set
+CONFIG_DISK=y
+CONFIG_DISK_WRITE=y
+
+#
+# drive types
+#
+# CONFIG_DISK_ATA is not set
+# CONFIG_DISK_AHCI is not set
+
+#
+# interface types
+#
+# CONFIG_DISK_INTF_PLATFORM_IDE is not set
+# CONFIG_USB_HOST is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_USB_MUSB is not set
+# CONFIG_VIDEO is not set
+CONFIG_MCI=y
+
+#
+# --- Feature list ---
+#
+# CONFIG_MCI_STARTUP is not set
+CONFIG_MCI_INFO=y
+CONFIG_MCI_WRITE=y
+# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+
+#
+# --- MCI host drivers ---
+#
+# CONFIG_MCI_DW is not set
+CONFIG_MCI_BCM283X=y
+# CONFIG_MCI_MMCI is not set
+# CONFIG_MCI_SPI is not set
+CONFIG_HAVE_CLK=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_COMMON_CLK=y
+CONFIG_CLOCKSOURCE_BCM283X=y
+CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
+
+#
+# MFD
+#
+# CONFIG_MFD_MC13XXX is not set
+# CONFIG_MFD_SYSCON is not set
+
+#
+# Misc devices
+#
+# CONFIG_JTAG is not set
+# CONFIG_SRAM is not set
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+# CONFIG_LED_GPIO_OF is not set
+# CONFIG_LED_GPIO_RGB is not set
+# CONFIG_LED_GPIO_BICOLOR is not set
+CONFIG_LED_TRIGGERS=y
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT25 is not set
+
+#
+# Input device support
+#
+# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_POLLER is not set
+# CONFIG_WATCHDOG_DW is not set
+CONFIG_WATCHDOG_BCM2835=y
+# CONFIG_PWM is not set
+# CONFIG_HWRNG is not set
+
+#
+# DMA support
+#
+CONFIG_GPIOLIB=y
+
+#
+# GPIO
+#
+# CONFIG_GPIO_74164 is not set
+CONFIG_GPIO_BCM283X=y
+# CONFIG_GPIO_GENERIC_PLATFORM is not set
+# CONFIG_GPIO_IMX is not set
+# CONFIG_GPIO_VF610 is not set
+# CONFIG_GPIO_MXS is not set
+# CONFIG_GPIO_OMAP is not set
+# CONFIG_GPIO_PL061 is not set
+# CONFIG_GPIO_DESIGNWARE is not set
+# CONFIG_W1 is not set
+# CONFIG_PINCTRL is not set
+# CONFIG_NVMEM is not set
+
+#
+# Bus devices
+#
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_FIXED is not set
+CONFIG_REGULATOR_BCM283X=y
+# CONFIG_RESET_CONTROLLER is not set
+# CONFIG_RTC_CLASS is not set
+
+#
+# Firmware Drivers
+#
+# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
+# CONFIG_GENERIC_PHY is not set
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Memory controller drivers
+#
+
+#
+# Filesystem support
+#
+CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
+CONFIG_FS_AUTOMOUNT=y
+# CONFIG_FS_CRAMFS is not set
+CONFIG_FS_EXT4=y
+CONFIG_FS_RAMFS=y
+CONFIG_FS_DEVFS=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+# CONFIG_FS_BPKFS is not set
+# CONFIG_FS_UIMAGEFS is not set
+# CONFIG_FS_PSTORE is not set
+# CONFIG_FS_SQUASHFS is not set
+
+#
+# ZLIB support disabled
+#
+
+#
+# LZ4 support disabled
+#
+
+#
+# LZO support disabled
+#
+
+#
+# XZ support disabled
+#
+
+#
+# ZSTD support disabled
+#
+
+#
+# Library routines
+#
+CONFIG_PARAMETER=y
+CONFIG_UNCOMPRESS=y
+# CONFIG_ZLIB is not set
+# CONFIG_BZLIB is not set
+# CONFIG_LZ4_DECOMPRESS is not set
+# CONFIG_ZSTD_DECOMPRESS is not set
+# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_PROCESS_ESCAPE_SEQUENCE=y
+# CONFIG_LZO_DECOMPRESS is not set
+CONFIG_FNMATCH=y
+CONFIG_QSORT=y
+CONFIG_XYMODEM=y
+# CONFIG_RATP is not set
+# CONFIG_ALLOW_PRNG_FALLBACK is not set
+# CONFIG_CRC_CCITT is not set
+
+#
+# Library gui routines
+#
+# CONFIG_BAREBOX_LOGO is not set
+
+#
+# Crypto support
+#
+CONFIG_CRC32=y
+CONFIG_CRC16=y
+CONFIG_DIGEST=y
+CONFIG_MD5=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
+# CONFIG_DIGEST_CRC32_GENERIC is not set
+CONFIG_DIGEST_MD5_GENERIC=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+# CONFIG_DIGEST_SHA224_GENERIC is not set
+CONFIG_DIGEST_SHA256_GENERIC=y
+# CONFIG_DIGEST_SHA384_GENERIC is not set
+# CONFIG_DIGEST_SHA512_GENERIC is not set
+# CONFIG_DIGEST_HMAC_GENERIC is not set
+# CONFIG_DIGEST_SHA1_ARM is not set
+# CONFIG_DIGEST_SHA256_ARM is not set
+# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 826d222..72d5421 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -364,6 +364,7 @@ CONFIG_ARM_AMBA=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_SERIAL_AMBA_PL011=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -389,6 +390,7 @@ CONFIG_DRIVER_NET_SMC911X=y
#
# CONFIG_AR8327N_PHY is not set
# CONFIG_AT803X_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -522,6 +524,15 @@ CONFIG_STATE_DRV=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -599,3 +610,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set
# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
deleted file mode 100644
index cfca106..0000000
--- a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Michael Grzeschik <m.grzeschik@pengutronix.de>
-Date: Fri, 10 Jun 2016 14:02:30 +0200
-Subject: [PATCH] beaglebone: add state entry for mmc0 and mmc1
-
-Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
----
- arch/arm/dts/am335x-bone-common.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
-diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi
-index 0413724e0ca1..6e58714516fd 100644
---- a/arch/arm/dts/am335x-bone-common.dtsi
-+++ b/arch/arm/dts/am335x-bone-common.dtsi
-@@ -11,6 +11,21 @@
- linux,stdout-path = &uart0;
- };
-
-+ bootstate: bootstate {
-+ compatible = "barebox,bootstate";
-+ backend-type = "nv";
-+
-+ system0 {
-+ default_attempts = <3>;
-+ boot = "mmc0";
-+ };
-+
-+ system1 {
-+ default_attempts = <3>;
-+ boot = "mmc1";
-+ };
-+ };
-+
- cpus {
- cpu@0 {
- cpu0-supply = <&dcdc2_reg>;
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
deleted file mode 100644
index 4b0c22d..0000000
--- a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Roland Hieber <r.hieber@pengutronix.de>
-Date: Tue, 15 May 2018 23:44:48 +0200
-Subject: [PATCH] Release pengutronix/multi_v7/20180515-1
-
-Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 88c19917394f..11e79cc339f4 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2018
- PATCHLEVEL = 05
- SUBLEVEL = 0
--EXTRAVERSION =
-+EXTRAVERSION =-20180515-1
- NAME = None
-
- # *DOCUMENTATION*
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/series b/configs/platform-v7a/patches/barebox-2018.05.0/series
deleted file mode 100644
index 272791c..0000000
--- a/configs/platform-v7a/patches/barebox-2018.05.0/series
+++ /dev/null
@@ -1,15 +0,0 @@
-# umpf-base: v2018.05.0
-# umpf-name: pengutronix/multi_v7
-# umpf-version: pengutronix/multi_v7/20180515-1
-# umpf-topic: v2018.05.0/customers/pengutronix/beaglebone
-# umpf-hashinfo: d1f50bff60c7069caad2df4ef02f672be456f141
-# umpf-topic-range: cd4320e3e86bd2ab7b4a19016ef8df6c5d69a5a5..d1f50bff60c7069caad2df4ef02f672be456f141
-0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
-# umpf-topic: v2018.05.0/customers/pengutronix/udoo-neo
-# umpf-hashinfo: 772e5039c9a147256a085c76a74cf5cb5c14ec35
-# umpf-topic-range: d1f50bff60c7069caad2df4ef02f672be456f141..183d8e8d0ccf827481923b3872144e2c10ef9fac
-0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
-# umpf-release: pengutronix/multi_v7/20180515-1
-# umpf-topic-range: 183d8e8d0ccf827481923b3872144e2c10ef9fac..734e18abc455f563837dd6ad0df6fb9378053b00
-0201-Release-pengutronix-multi_v7-20180515-1.patch
-# umpf-end
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
new file mode 100644
index 0000000..bd459d0
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
@@ -0,0 +1,299 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:37 +0100
+Subject: [PATCH] ARM: import opcode helpers from Linux kernel
+
+Those are needed to generate some of the ARM SEC and VIRT
+opcodes in a portable way.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/include/asm/opcodes-virt.h | 39 +++++
+ arch/arm/include/asm/opcodes.h | 231 ++++++++++++++++++++++++++++
+ 2 files changed, 270 insertions(+)
+ create mode 100644 arch/arm/include/asm/opcodes-virt.h
+ create mode 100644 arch/arm/include/asm/opcodes.h
+
+diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h
+new file mode 100644
+index 000000000000..efcfdf92d9d5
+--- /dev/null
++++ b/arch/arm/include/asm/opcodes-virt.h
+@@ -0,0 +1,39 @@
++/*
++ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
++ * Copyright (C) 2012 Linaro Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++#ifndef __ASM_ARM_OPCODES_VIRT_H
++#define __ASM_ARM_OPCODES_VIRT_H
++
++#include <asm/opcodes.h>
++
++#define __HVC(imm16) __inst_arm_thumb32( \
++ 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \
++ 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \
++)
++
++#define __ERET __inst_arm_thumb32( \
++ 0xE160006E, \
++ 0xF3DE8F00 \
++)
++
++#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \
++ 0xE12EF300 | regnum, \
++ 0xF3808E30 | (regnum << 16) \
++)
++
++#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
+diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
+new file mode 100644
+index 000000000000..a78bf5d2c518
+--- /dev/null
++++ b/arch/arm/include/asm/opcodes.h
+@@ -0,0 +1,231 @@
++/*
++ * arch/arm/include/asm/opcodes.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARM_OPCODES_H
++#define __ASM_ARM_OPCODES_H
++
++#ifndef __ASSEMBLY__
++#include <linux/linkage.h>
++extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
++#endif
++
++#define ARM_OPCODE_CONDTEST_FAIL 0
++#define ARM_OPCODE_CONDTEST_PASS 1
++#define ARM_OPCODE_CONDTEST_UNCOND 2
++
++
++/*
++ * Assembler opcode byteswap helpers.
++ * These are only intended for use by this header: don't use them directly,
++ * because they will be suboptimal in most cases.
++ */
++#define ___asm_opcode_swab32(x) ( \
++ (((x) << 24) & 0xFF000000) \
++ | (((x) << 8) & 0x00FF0000) \
++ | (((x) >> 8) & 0x0000FF00) \
++ | (((x) >> 24) & 0x000000FF) \
++)
++#define ___asm_opcode_swab16(x) ( \
++ (((x) << 8) & 0xFF00) \
++ | (((x) >> 8) & 0x00FF) \
++)
++#define ___asm_opcode_swahb32(x) ( \
++ (((x) << 8) & 0xFF00FF00) \
++ | (((x) >> 8) & 0x00FF00FF) \
++)
++#define ___asm_opcode_swahw32(x) ( \
++ (((x) << 16) & 0xFFFF0000) \
++ | (((x) >> 16) & 0x0000FFFF) \
++)
++#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
++#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
++
++
++/*
++ * Opcode byteswap helpers
++ *
++ * These macros help with converting instructions between a canonical integer
++ * format and in-memory representation, in an endianness-agnostic manner.
++ *
++ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
++ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
++ *
++ *
++ * Canonical instruction representation:
++ *
++ * ARM: 0xKKLLMMNN
++ * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8
++ * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8
++ *
++ * There is no way to distinguish an ARM instruction in canonical representation
++ * from a Thumb instruction (just as these cannot be distinguished in memory).
++ * Where this distinction is important, it needs to be tracked separately.
++ *
++ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
++ * represent any valid Thumb-2 instruction. For this range,
++ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
++ *
++ * The ___asm variants are intended only for use by this header, in situations
++ * involving inline assembler. For .S files, the normal __opcode_*() macros
++ * should do the right thing.
++ */
++#ifdef __ASSEMBLY__
++
++#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
++#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
++#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
++#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
++#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
++#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
++
++#else /* ! __ASSEMBLY__ */
++
++#include <linux/types.h>
++#include <linux/swab.h>
++
++#define ___opcode_swab32(x) swab32(x)
++#define ___opcode_swab16(x) swab16(x)
++#define ___opcode_swahb32(x) swahb32(x)
++#define ___opcode_swahw32(x) swahw32(x)
++#define ___opcode_identity32(x) ((u32)(x))
++#define ___opcode_identity16(x) ((u16)(x))
++
++#endif /* ! __ASSEMBLY__ */
++
++
++#ifdef CONFIG_CPU_ENDIAN_BE8
++
++#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
++#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
++#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
++
++#else /* ! CONFIG_CPU_ENDIAN_BE8 */
++
++#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
++#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
++#ifndef CONFIG_CPU_ENDIAN_BE32
++/*
++ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
++ * work in all cases, due to alignment constraints. For now, a correct
++ * version is not provided for BE32.
++ */
++#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
++#endif
++
++#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
++
++#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
++#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
++#ifndef CONFIG_CPU_ENDIAN_BE32
++#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
++#endif
++
++/* Operations specific to Thumb opcodes */
++
++/* Instruction size checks: */
++#define __opcode_is_thumb32(x) ( \
++ ((x) & 0xF8000000) == 0xE8000000 \
++ || ((x) & 0xF0000000) == 0xF0000000 \
++)
++#define __opcode_is_thumb16(x) ( \
++ ((x) & 0xFFFF0000) == 0 \
++ && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \
++)
++
++/* Operations to construct or split 32-bit Thumb instructions: */
++#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
++#define __opcode_thumb32_second(x) (___opcode_identity16(x))
++#define __opcode_thumb32_compose(first, second) ( \
++ (___opcode_identity32(___opcode_identity16(first)) << 16) \
++ | ___opcode_identity32(___opcode_identity16(second)) \
++)
++#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
++#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
++#define ___asm_opcode_thumb32_compose(first, second) ( \
++ (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
++ | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \
++)
++
++/*
++ * Opcode injection helpers
++ *
++ * In rare cases it is necessary to assemble an opcode which the
++ * assembler does not support directly, or which would normally be
++ * rejected because of the CFLAGS or AFLAGS used to build the affected
++ * file.
++ *
++ * Before using these macros, consider carefully whether it is feasible
++ * instead to change the build flags for your file, or whether it really
++ * makes sense to support old assembler versions when building that
++ * particular kernel feature.
++ *
++ * The macros defined here should only be used where there is no viable
++ * alternative.
++ *
++ *
++ * __inst_arm(x): emit the specified ARM opcode
++ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
++ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
++ *
++ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
++ * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2
++ * kernel is being built
++ *
++ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
++ * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2
++ * kernel is being built
++ *
++ *
++ * Note that using these macros directly is poor practice. Instead, you
++ * should use them to define human-readable wrapper macros to encode the
++ * instructions that you care about. In code which might run on ARMv7 or
++ * above, you can usually use the __inst_arm_thumb{16,32} macros to
++ * specify the ARM and Thumb alternatives at the same time. This ensures
++ * that the correct opcode gets emitted depending on the instruction set
++ * used for the kernel build.
++ *
++ * Look at opcodes-virt.h for an example of how to use these macros.
++ */
++#include <linux/stringify.h>
++
++#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
++#define __inst_thumb32(x) ___inst_thumb32( \
++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \
++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \
++)
++#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
++
++#ifdef CONFIG_THUMB2_BAREBOX
++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
++ __inst_thumb16(thumb_opcode)
++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
++ __inst_thumb32(thumb_opcode)
++#else
++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
++#endif
++
++/* Helpers for the helpers. Don't use these directly. */
++#ifdef __ASSEMBLY__
++#define ___inst_arm(x) .long x
++#define ___inst_thumb16(x) .short x
++#define ___inst_thumb32(first, second) .short first, second
++#else
++#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
++#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
++#define ___inst_thumb32(first, second) \
++ ".short " __stringify(first) ", " __stringify(second) "\n\t"
++#endif
++
++#endif /* __ASM_ARM_OPCODES_H */
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
new file mode 100644
index 0000000..fcd116a
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
@@ -0,0 +1,88 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:38 +0100
+Subject: [PATCH] ARM: safely switch from HYP to SVC mode if required
+
+This is a port of the Linux safe_svcmode_maskall macro to
+the Barebox lowlevel init.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/lowlevel.S | 18 +++++++++++++++---
+ arch/arm/include/asm/system.h | 26 ++++++++++++++++++++++++++
+ 2 files changed, 41 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
+index 7696a198e764..43665981e48b 100644
+--- a/arch/arm/cpu/lowlevel.S
++++ b/arch/arm/cpu/lowlevel.S
+@@ -1,16 +1,28 @@
+ #include <linux/linkage.h>
+ #include <init.h>
+ #include <asm/system.h>
++#include <asm/opcodes-virt.h>
+
+ .section ".text_bare_init_","ax"
+ ENTRY(arm_cpu_lowlevel_init)
+ /* save lr, since it may be banked away with a processor mode change */
+ mov r2, lr
++
+ /* set the cpu to SVC32 mode, mask irq and fiq */
+ mrs r12, cpsr
+- bic r12, r12, #0x1f
+- orr r12, r12, #0xd3
+- msr cpsr, r12
++ eor r12, r12, #HYP_MODE
++ tst r12, #MODE_MASK
++ bic r12, r12, #MODE_MASK
++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
++THUMB( orr r12, r12, #PSR_T_BIT )
++ bne 1f
++ orr r12, r12, #PSR_A_BIT
++ adr lr, 2f
++ msr spsr_cxsf, r12
++ __MSR_ELR_HYP(14)
++ __ERET
++1: msr cpsr_c, r12
++2:
+
+ #if __LINUX_ARM_ARCH__ >= 6
+ /*
+diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
+index 5cf828ea36cb..48242ab473f4 100644
+--- a/arch/arm/include/asm/system.h
++++ b/arch/arm/include/asm/system.h
+@@ -60,6 +60,32 @@
+ #define CR_AFE (1 << 29) /* Access flag enable */
+ #define CR_TE (1 << 30) /* Thumb exception enable */
+
++/*
++ * PSR bits
++ */
++#define USR_MODE 0x00000010
++#define FIQ_MODE 0x00000011
++#define IRQ_MODE 0x00000012
++#define SVC_MODE 0x00000013
++#define ABT_MODE 0x00000017
++#define HYP_MODE 0x0000001a
++#define UND_MODE 0x0000001b
++#define SYSTEM_MODE 0x0000001f
++#define MODE32_BIT 0x00000010
++#define MODE_MASK 0x0000001f
++
++#define PSR_T_BIT 0x00000020
++#define PSR_F_BIT 0x00000040
++#define PSR_I_BIT 0x00000080
++#define PSR_A_BIT 0x00000100
++#define PSR_E_BIT 0x00000200
++#define PSR_J_BIT 0x01000000
++#define PSR_Q_BIT 0x08000000
++#define PSR_V_BIT 0x10000000
++#define PSR_C_BIT 0x20000000
++#define PSR_Z_BIT 0x40000000
++#define PSR_N_BIT 0x80000000
++
+ #ifndef __ASSEMBLY__
+ #if __LINUX_ARM_ARCH__ >= 7
+ static inline unsigned int current_el(void)
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
new file mode 100644
index 0000000..eed9e52
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
@@ -0,0 +1,37 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:39 +0100
+Subject: [PATCH] ARM: allow secure monitor code to be built without PSCI
+
+The hyp mode handling added in the secure monitor code is also useful
+when Barebox doesn't have PSCI control. Allow to build without PSCI.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/sm_as.S | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
+index 09580e75de5f..0d01e1bf2435 100644
+--- a/arch/arm/cpu/sm_as.S
++++ b/arch/arm/cpu/sm_as.S
+@@ -129,7 +129,9 @@ secure_monitor:
+ sub sp, sp, #4*4 @ allocate result structure on stack
+ mov r12, sp
+ push {r4-r6, r12}
++#ifdef CONFIG_ARM_PSCI
+ bl psci_entry
++#endif
+ pop {r4-r6, r12}
+ ldm r12, {r0-r3}
+ add sp, sp, #4*4
+@@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
+ mcr p15, 0, r0, c1, c0, 1 @ ACTLR
+
+ bl secure_monitor_stack_setup
++#ifdef CONFIG_ARM_PSCI
+ bl psci_cpu_entry_c
++#endif
+
+ ENDPROC(psci_cpu_entry)
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
new file mode 100644
index 0000000..8047922
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
@@ -0,0 +1,193 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:40 +0100
+Subject: [PATCH] ARM: add file for HYP mode related setup
+
+This adds routines to add hyp mode vectors and switch back to HYP
+mode from SVC. This is needed in both the PBL and Barebox proper.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/Makefile | 3 +
+ arch/arm/cpu/hyp.S | 116 ++++++++++++++++++++++++++++++++++
+ arch/arm/cpu/sm_as.S | 11 ----
+ arch/arm/include/asm/secure.h | 3 +
+ 4 files changed, 122 insertions(+), 11 deletions(-)
+ create mode 100644 arch/arm/cpu/hyp.S
+
+diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
+index 874d723e2cee..0a403bc981c5 100644
+--- a/arch/arm/cpu/Makefile
++++ b/arch/arm/cpu/Makefile
+@@ -4,6 +4,9 @@ obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions$(S64).o interrupts$(S64).o
+ obj-$(CONFIG_MMU) += mmu$(S64).o
+ lwl-y += lowlevel$(S64).o
+ obj-pbl-$(CONFIG_MMU) += mmu-early$(S64).o
++obj-pbl-$(CONFIG_CPU_32v7) += hyp.o
++AFLAGS_hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
++AFLAGS_pbl-hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
+
+ obj-y += start.o entry.o
+
+diff --git a/arch/arm/cpu/hyp.S b/arch/arm/cpu/hyp.S
+new file mode 100644
+index 000000000000..1314b56eab25
+--- /dev/null
++++ b/arch/arm/cpu/hyp.S
+@@ -0,0 +1,116 @@
++#include <linux/linkage.h>
++#include <asm/system.h>
++#include <asm/opcodes-virt.h>
++#include <init.h>
++
++.arch_extension sec
++.arch_extension virt
++
++__BARE_INIT
++
++.data
++ .align 2
++ENTRY(__boot_cpu_mode)
++ .long 0
++.text
++
++ENTRY(__hyp_install)
++ mrs r12, cpsr
++ and r12, r12, #MODE_MASK
++
++ @ Save the initial CPU state
++ adr r0, .L__boot_cpu_mode_offset
++ ldr r1, [r0]
++ str r12, [r0, r1]
++
++ cmp r12, #HYP_MODE
++ movne pc, lr @ give up if the CPU is not in HYP mode
++
++ @ Now install the hypervisor stub:
++ adr r12, __hyp_vectors
++ mcr p15, 4, r12, c12, c0, 0 @ set hypervisor vector base (HVBAR)
++
++ @ Disable all traps, so we don't get any nasty surprise
++ mov r12, #0
++ mcr p15, 4, r12, c1, c1, 0 @ HCR
++ mcr p15, 4, r12, c1, c1, 2 @ HCPTR
++ mcr p15, 4, r12, c1, c1, 3 @ HSTR
++
++THUMB( orr r12, #(1 << 30) ) @ HSCTLR.TE
++ mcr p15, 4, r12, c1, c0, 0 @ HSCTLR
++
++ mrc p15, 4, r12, c1, c1, 1 @ HDCR
++ and r12, #0x1f @ Preserve HPMN
++ mcr p15, 4, r12, c1, c1, 1 @ HDCR
++
++ @ Make sure NS-SVC is initialised appropriately
++ mrc p15, 0, r12, c1, c0, 0 @ SCTLR
++ orr r12, #(1 << 5) @ CP15 barriers enabled
++ bic r12, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7)
++ bic r12, #(3 << 19) @ WXN and UWXN disabled
++ mcr p15, 0, r12, c1, c0, 0 @ SCTLR
++
++ mrc p15, 0, r12, c0, c0, 0 @ MIDR
++ mcr p15, 4, r12, c0, c0, 0 @ VPIDR
++
++ mrc p15, 0, r12, c0, c0, 5 @ MPIDR
++ mcr p15, 4, r12, c0, c0, 5 @ VMPIDR
++ bx lr
++ENDPROC(__hyp_install)
++
++ENTRY(armv7_hyp_install)
++ mov r2, lr
++
++ bl __hyp_install
++
++ /* set the cpu to SVC32 mode, mask irq and fiq */
++ mrs r12, cpsr
++ eor r12, r12, #HYP_MODE
++ tst r12, #MODE_MASK
++ bic r12, r12, #MODE_MASK
++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
++THUMB( orr r12, r12, #PSR_T_BIT )
++ bne 1f
++ orr r12, r12, #PSR_A_BIT
++ adr lr, 2f
++ msr spsr_cxsf, r12
++ __MSR_ELR_HYP(14)
++ __ERET
++1: msr cpsr_c, r12
++2:
++ mov pc, r2
++ENDPROC(armv7_hyp_install)
++
++ENTRY(armv7_switch_to_hyp)
++ mov r0, lr
++ mov r1, sp @ save SVC copy of LR and SP
++ isb
++ hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
++ mov sp, r1
++ mov lr, r0 @ restore SVC copy of LR and SP
++
++ bx lr
++ENDPROC(armv7_switch_to_hyp)
++
++.align 2
++.L__boot_cpu_mode_offset:
++ .long __boot_cpu_mode - .
++
++/* The HYP trap is crafted to match armv7_switch_to_hyp() */
++__hyp_do_trap:
++ mov lr, r0
++ mov sp, r1
++ bx lr
++ENDPROC(__hyp_do_trap)
++
++.align 5
++__hyp_vectors:
++__hyp_reset: W(b) .
++__hyp_und: W(b) .
++__hyp_svc: W(b) .
++__hyp_pabort: W(b) .
++__hyp_dabort: W(b) .
++__hyp_trap: W(b) __hyp_do_trap
++__hyp_irq: W(b) .
++__hyp_fiq: W(b) .
++ENDPROC(__hyp_vectors)
+diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
+index 0d01e1bf2435..de6cd0406f4f 100644
+--- a/arch/arm/cpu/sm_as.S
++++ b/arch/arm/cpu/sm_as.S
+@@ -148,17 +148,6 @@ hyp_trap:
+ mov pc, lr @ do no switch modes, but
+ @ return to caller
+
+-ENTRY(armv7_switch_to_hyp)
+- mov r0, lr
+- mov r1, sp @ save SVC copy of LR and SP
+- isb
+- hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
+- mov sp, r1
+- mov lr, r0 @ restore SVC copy of LR and SP
+-
+- bx lr
+-ENDPROC(armv7_switch_to_hyp)
+-
+ ENTRY(psci_cpu_entry)
+ mrc p15, 0, r0, c1, c0, 1 @ ACTLR
+ orr r0, r0, #(1 << 6) @ Set SMP bit
+diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
+index a4cb1f6c1c44..663d81ea27dd 100644
+--- a/arch/arm/include/asm/secure.h
++++ b/arch/arm/include/asm/secure.h
+@@ -5,9 +5,12 @@
+
+ int armv7_secure_monitor_install(void);
+ int __armv7_secure_monitor_install(void);
++
+ void armv7_switch_to_hyp(void);
++void armv7_hyp_install(void);
+
+ extern unsigned char secure_monitor_init_vectors[];
++extern int __boot_cpu_mode;
+
+ enum arm_security_state {
+ ARM_STATE_SECURE,
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
new file mode 100644
index 0000000..b82de4b
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
@@ -0,0 +1,30 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:41 +0100
+Subject: [PATCH] ARM: don't try to install secure monitor when entered in HYP
+ mode
+
+When Barebox has been entered in HYP mode, the CPU is already switched
+to the non-secure world and it's not possible for Barebox to install
+it's own secure monitor.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/sm.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
+index cb0bac106b5f..1246d8e3a441 100644
+--- a/arch/arm/cpu/sm.c
++++ b/arch/arm/cpu/sm.c
+@@ -184,6 +184,9 @@ int armv7_secure_monitor_install(void)
+ return -EINVAL;
+ }
+
++ if (__boot_cpu_mode == HYP_MODE)
++ return 0;
++
+ mmuon = get_cr() & CR_M;
+
+ vbar = get_vbar();
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
new file mode 100644
index 0000000..1de95c1
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
@@ -0,0 +1,31 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:42 +0100
+Subject: [PATCH] ARM: default to starting kernel in HYP mode when entered in
+ HYP
+
+When Barebox has been entered in HYP mode, there is a high chance that
+the kernel is intended to be started in HYP mode also. Get this
+default into place.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/sm.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
+index 1246d8e3a441..6fad30adabc9 100644
+--- a/arch/arm/cpu/sm.c
++++ b/arch/arm/cpu/sm.c
+@@ -262,6 +262,9 @@ static int sm_init(void)
+ bootm_secure_state_names,
+ ARRAY_SIZE(bootm_secure_state_names));
+
++ if (__boot_cpu_mode == HYP_MODE)
++ bootm_secure_state = ARM_STATE_HYP;
++
+ return 0;
+ }
+ device_initcall(sm_init);
+\ No newline at end of file
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
new file mode 100644
index 0000000..10615e9
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
@@ -0,0 +1,105 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:43 +0100
+Subject: [PATCH] ARM: install HYP vectors at PBL and Barebox entry
+
+If the CPU was already in HYP mode when entering the PBL, install a
+simple trap handler to allow to get back from SVC to HYP before
+switching to HYP mode.
+
+As the vectors are part of the currently running binary, we need to
+do the same setup when starting the real Barebox binary, as the PBL
+setup vectors might get overwritten. To do this we trap into HYP mode
+just before jumping to Barebox and then re-do the vector setup and
+SVC switch as the first thing in Barebox proper.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/lowlevel.S | 5 +++++
+ arch/arm/cpu/start-pbl.c | 4 ++++
+ arch/arm/cpu/start.c | 5 +++++
+ arch/arm/cpu/uncompress.c | 4 ++++
+ 4 files changed, 18 insertions(+)
+
+diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
+index 43665981e48b..3b52644e43e1 100644
+--- a/arch/arm/cpu/lowlevel.S
++++ b/arch/arm/cpu/lowlevel.S
+@@ -8,6 +8,11 @@ ENTRY(arm_cpu_lowlevel_init)
+ /* save lr, since it may be banked away with a processor mode change */
+ mov r2, lr
+
++#ifdef CONFIG_CPU_32v7
++ /* careful: the hyp install corrupts r0 and r1 */
++ bl __hyp_install
++#endif
++
+ /* set the cpu to SVC32 mode, mask irq and fiq */
+ mrs r12, cpsr
+ eor r12, r12, #HYP_MODE
+diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
+index 16159d7f9d51..48a808645671 100644
+--- a/arch/arm/cpu/start-pbl.c
++++ b/arch/arm/cpu/start-pbl.c
+@@ -26,6 +26,7 @@
+ #include <asm/barebox-arm-head.h>
+ #include <asm-generic/memory_layout.h>
+ #include <asm/sections.h>
++#include <asm/secure.h>
+ #include <asm/cache.h>
+ #include <asm/mmu.h>
+ #include <asm/unaligned.h>
+@@ -98,5 +99,8 @@ __noreturn void barebox_single_pbl_start(unsigned long membase,
+ else
+ barebox = (void *)barebox_base;
+
++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
++ armv7_switch_to_hyp();
++
+ barebox(membase, memsize, boarddata);
+ }
+diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
+index 64bd942ad764..a79d64eaa6e6 100644
+--- a/arch/arm/cpu/start.c
++++ b/arch/arm/cpu/start.c
+@@ -24,6 +24,7 @@
+ #include <asm/barebox-arm-head.h>
+ #include <asm-generic/memory_layout.h>
+ #include <asm/sections.h>
++#include <asm/secure.h>
+ #include <asm/unaligned.h>
+ #include <asm/cache.h>
+ #include <asm/mmu.h>
+@@ -147,6 +148,10 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
+ unsigned long barebox_base = arm_mem_barebox_image(membase,
+ endmem,
+ barebox_size);
++
++ if (IS_ENABLED(CONFIG_CPU_V7))
++ armv7_hyp_install();
++
+ if (IS_ENABLED(CONFIG_RELOCATABLE))
+ relocate_to_adr(barebox_base);
+
+diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
+index 43b49b42120b..048bca0c9599 100644
+--- a/arch/arm/cpu/uncompress.c
++++ b/arch/arm/cpu/uncompress.c
+@@ -27,6 +27,7 @@
+ #include <asm/barebox-arm-head.h>
+ #include <asm-generic/memory_layout.h>
+ #include <asm/sections.h>
++#include <asm/secure.h>
+ #include <asm/cache.h>
+ #include <asm/mmu.h>
+ #include <asm/unaligned.h>
+@@ -105,5 +106,8 @@ void __noreturn barebox_multi_pbl_start(unsigned long membase,
+
+ pr_debug("jumping to uncompressed image at 0x%p\n", barebox);
+
++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
++ armv7_switch_to_hyp();
++
+ barebox(membase, memsize, boarddata);
+ }
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
new file mode 100644
index 0000000..9aa90b5
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
@@ -0,0 +1,41 @@
+From: Enrico Joerns <ejo@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:44 +0100
+Subject: [PATCH] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
+
+Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
+ arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
+ 2 files changed, 6 insertions(+)
+
+diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
+index 6e375bc984de..3baed6525586 100644
+--- a/arch/arm/boards/raspberry-pi/rpi-common.c
++++ b/arch/arm/boards/raspberry-pi/rpi-common.c
+@@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
+ const struct rpi_model rpi_models_new_scheme[] = {
+ RPI_MODEL(0, "Unknown model", NULL),
+ RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
++ RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
++ RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
+ };
+
+ static int rpi_board_rev = 0;
+diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
+index 2b5aea88ee0a..0d1ac074e328 100644
+--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
+@@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
+
+ /* RPi 2 */
+ #define BCM2836_BOARD_REV_2_B 0x4
++/* RPi 3 */
++#define BCM2837_BOARD_REV_3_B 0x8
++/* Zero */
++#define BCM2835_BOARD_REV_ZERO 0x9
+
+ /*
+ * 0x2..0xf from:
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
new file mode 100644
index 0000000..8e8d76a
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
@@ -0,0 +1,141 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:45 +0100
+Subject: [PATCH] ARM: rpi: add raspberry pi 3 support
+
+This adds basic support at the same feature level as the other
+supported raspberry pi boards.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/boards/raspberry-pi/lowlevel.c | 14 ++++++++++++--
+ arch/arm/configs/rpi_defconfig | 2 ++
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/bcm2837-rpi-3.dts | 16 ++++++++++++++++
+ arch/arm/mach-bcm283x/Kconfig | 6 ++++++
+ arch/arm/mach-bcm283x/core.c | 1 +
+ images/Makefile.bcm283x | 4 ++++
+ 7 files changed, 42 insertions(+), 2 deletions(-)
+ create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts
+
+diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c
+index cbc6caa4b9ed..34c9350920e9 100644
+--- a/arch/arm/boards/raspberry-pi/lowlevel.c
++++ b/arch/arm/boards/raspberry-pi/lowlevel.c
+@@ -1,7 +1,7 @@
++#include <asm/barebox-arm.h>
++#include <asm/cache.h>
+ #include <common.h>
+ #include <linux/sizes.h>
+-#include <asm/barebox-arm.h>
+-#include <asm/barebox-arm-head.h>
+ #include <mach/platform.h>
+
+ extern char __dtb_bcm2835_rpi_start[];
+@@ -23,3 +23,13 @@ ENTRY_FUNCTION(start_raspberry_pi2, r0, r1, r2)
+
+ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
+ }
++
++extern char __dtb_bcm2837_rpi_3_start[];
++ENTRY_FUNCTION(start_raspberry_pi3, r0, r1, r2)
++{
++ void *fdt = __dtb_bcm2837_rpi_3_start + get_runtime_offset();
++
++ arm_cpu_lowlevel_init();
++
++ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
++}
+diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
+index f3aef4290425..cd88b4ac751c 100644
+--- a/arch/arm/configs/rpi_defconfig
++++ b/arch/arm/configs/rpi_defconfig
+@@ -1,9 +1,11 @@
+ CONFIG_ARCH_BCM283X=y
+ CONFIG_MACH_RPI=y
+ CONFIG_MACH_RPI2=y
++CONFIG_MACH_RPI3=y
+ CONFIG_AEABI=y
+ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+ CONFIG_ARM_UNWIND=y
++CONFIG_IMAGE_COMPRESSION_NONE=y
+ CONFIG_MMU=y
+ CONFIG_MALLOC_TLSF=y
+ CONFIG_KALLSYMS=y
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 1caeca35b484..4e063902c635 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -71,6 +71,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
+ pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
+ pbl-dtb-$(CONFIG_MACH_RPI) += bcm2835-rpi.dtb.o
+ pbl-dtb-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
++pbl-dtb-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
+ pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
+ pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
+ pbl-dtb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-sdb.dtb.o
+diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
+new file mode 100644
+index 000000000000..d6ffc369122c
+--- /dev/null
++++ b/arch/arm/dts/bcm2837-rpi-3.dts
+@@ -0,0 +1,16 @@
++#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
++
++/ {
++ chosen {
++ stdout-path = &uart0;
++ };
++
++ memory {
++ reg = <0x0 0x0>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++ /delete-node/ bluetooth;
++};
+diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
+index 1457f114ccaa..af2f88c47acb 100644
+--- a/arch/arm/mach-bcm283x/Kconfig
++++ b/arch/arm/mach-bcm283x/Kconfig
+@@ -19,6 +19,12 @@ config MACH_RPI2
+ select CPU_V7
+ select MACH_RPI_COMMON
+
++config MACH_RPI3
++ bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
++ select CPU_V7
++ select MACH_RPI_COMMON
++ select ARM_SECURE_MONITOR
++
+ endmenu
+
+ config MACH_RPI_DEBUG_UART_BASE
+diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-bcm283x/core.c
+index fddcb0d1a1d4..26f0996b1cb8 100644
+--- a/arch/arm/mach-bcm283x/core.c
++++ b/arch/arm/mach-bcm283x/core.c
+@@ -41,6 +41,7 @@ static int bcm2835_clk_init(void)
+ clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
+ clk_register_clkdev(clk, NULL, "uart0-pl0110");
+ clk_register_clkdev(clk, NULL, "20201000.serial");
++ clk_register_clkdev(clk, NULL, "3f201000.serial");
+
+ clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
+ clk_register_clkdev(clk, NULL, "bcm2835-cs");
+diff --git a/images/Makefile.bcm283x b/images/Makefile.bcm283x
+index d59ef043f05c..d14e648926ac 100644
+--- a/images/Makefile.bcm283x
++++ b/images/Makefile.bcm283x
+@@ -9,3 +9,7 @@ image-$(CONFIG_MACH_RPI) += barebox-raspberry-pi-1.img
+ pblx-$(CONFIG_MACH_RPI2) += start_raspberry_pi2
+ FILE_barebox-raspberry-pi-2.img = start_raspberry_pi2.pblx
+ image-$(CONFIG_MACH_RPI2) += barebox-raspberry-pi-2.img
++
++pblx-$(CONFIG_MACH_RPI3) += start_raspberry_pi3
++FILE_barebox-raspberry-pi-3.img = start_raspberry_pi3.pblx
++image-$(CONFIG_MACH_RPI3) += barebox-raspberry-pi-3.img
+\ No newline at end of file
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
new file mode 100644
index 0000000..da498ba
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
@@ -0,0 +1,25 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:46 +0100
+Subject: [PATCH] ARM: rpi: autosize malloc area
+
+Autosize the malloc area according to the available RAM size.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/configs/rpi_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
+index cd88b4ac751c..2bb615849324 100644
+--- a/arch/arm/configs/rpi_defconfig
++++ b/arch/arm/configs/rpi_defconfig
+@@ -7,6 +7,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+ CONFIG_ARM_UNWIND=y
+ CONFIG_IMAGE_COMPRESSION_NONE=y
+ CONFIG_MMU=y
++CONFIG_MALLOC_SIZE=0x0
+ CONFIG_MALLOC_TLSF=y
+ CONFIG_KALLSYMS=y
+ CONFIG_PROMPT="R-Pi> "
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
similarity index 93%
rename from configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
rename to configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
index 06c356b..9f99a39 100644
--- a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
@@ -26,10 +26,10 @@ Forwarded: id:20170627190317.19253-1-uwe@kleine-koenig.org
create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
-index 30f4c299f1a1..f70fbac8f379 100644
+index c737cf34138c..9aee9bf0993a 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
-@@ -135,6 +135,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
+@@ -137,6 +137,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
obj-$(CONFIG_MACH_TX53) += karo-tx53/
obj-$(CONFIG_MACH_TX6X) += karo-tx6x/
obj-$(CONFIG_MACH_UDOO) += udoo/
@@ -254,10 +254,10 @@ index 000000000000..e78c2685fd78
+ imx6sx_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index e60e0ea0c6be..b87e27c8c263 100644
+index 4e063902c635..3d34a78f7878 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -93,6 +93,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
+@@ -97,6 +97,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
@@ -276,10 +276,10 @@ index 000000000000..9203d40207c5
+/{
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
-index 9052a94ea071..9ec95bb6df09 100644
+index 63a92bd5bd1d..ab515ecf2286 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
-@@ -377,6 +377,10 @@ config MACH_UDOO
+@@ -380,6 +380,10 @@ config MACH_UDOO
bool "Freescale i.MX6 UDOO Board"
select ARCH_IMX6
@@ -291,22 +291,22 @@ index 9052a94ea071..9ec95bb6df09 100644
bool "Variscite i.MX6 Quad SOM"
select ARCH_IMX6
diff --git a/arch/arm/mach-imx/include/mach/esdctl.h b/arch/arm/mach-imx/include/mach/esdctl.h
-index 66dcc8974cfb..bd6092febca4 100644
+index bc6c7339535e..18c4a2836007 100644
--- a/arch/arm/mach-imx/include/mach/esdctl.h
+++ b/arch/arm/mach-imx/include/mach/esdctl.h
-@@ -137,6 +137,7 @@ void __noreturn imx51_barebox_entry(void *boarddata);
- void __noreturn imx53_barebox_entry(void *boarddata);
- void __noreturn imx6q_barebox_entry(void *boarddata);
- void __noreturn imx6ul_barebox_entry(void *boarddata);
+@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void *boarddata);
+ void __noreturn vf610_barebox_entry(void *boarddata);
+ void __noreturn imx8mq_barebox_entry(void *boarddata);
+ void __noreturn imx7d_barebox_entry(void *boarddata);
+#define imx6sx_barebox_entry(boarddata) imx6ul_barebox_entry(boarddata)
void imx_esdctl_disable(void);
#endif
diff --git a/images/Makefile.imx b/images/Makefile.imx
-index 90da95d4d025..6420490811f9 100644
+index 341ce8506d88..c32f78b7e184 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
-@@ -275,6 +275,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
+@@ -271,6 +271,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblx.imximg
image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
new file mode 100644
index 0000000..bd444f0
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
@@ -0,0 +1,22 @@
+From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
+Date: Thu, 22 Nov 2018 12:09:22 +0100
+Subject: [PATCH] Release pengutronix_multiv7/20181122-1
+
+Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 60a5d5ce11f4..b55ca4b03129 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ VERSION = 2018
+ PATCHLEVEL = 11
+ SUBLEVEL = 0
+-EXTRAVERSION =
++EXTRAVERSION =-20181122-1
+ NAME = None
+
+ # *DOCUMENTATION*
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/series b/configs/platform-v7a/patches/barebox-2018.11.0/series
new file mode 100644
index 0000000..e056b0c
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/series
@@ -0,0 +1,24 @@
+# umpf-base: v2018.11.0
+# umpf-name: pengutronix_multiv7
+# umpf-version: pengutronix_multiv7/20181122-1
+# umpf-topic: v2018.11.0/customers/pengutronix/rpi3
+# umpf-hashinfo: 1bdd9ef32c272ba5501e24ba643107855dd5149c
+# umpf-topic-range: d1f223eddbcde31ba2a3f34fc0a1a14f40ea7130..1bdd9ef32c272ba5501e24ba643107855dd5149c
+0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
+0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
+0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
+0004-ARM-add-file-for-HYP-mode-related-setup.patch
+0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
+0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
+0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
+0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
+0009-ARM-rpi-add-raspberry-pi-3-support.patch
+0010-ARM-rpi-autosize-malloc-area.patch
+# umpf-topic: v2018.11.0/customers/pengutronix/udoo-neo
+# umpf-hashinfo: c5f2e150d7e8d5439458df1a2cab71b25fc36e19
+# umpf-topic-range: 1bdd9ef32c272ba5501e24ba643107855dd5149c..8cacc208f8f6c9071113b12a618a54d7e80b1694
+0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
+# umpf-release: pengutronix_multiv7/20181122-1
+# umpf-topic-range: 8cacc208f8f6c9071113b12a618a54d7e80b1694..45c64f6b4690a6b51be1c487de1ffec6472704e1
+0201-Release-pengutronix_multiv7-20181122-1.patch
+# umpf-end
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index cdea840..e2c8ac1 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -166,6 +166,8 @@ PTXCONF_BAREBOX_AM335X=y
PTXCONF_BAREBOX_MX6=y
PTXCONF_BAREBOX_RPI2=y
PTXCONF_BAREBOX_RPI2_NEEDS_HOST_LZOP=y
+PTXCONF_BAREBOX_RPI3=y
+# PTXCONF_BAREBOX_RPI3_NEEDS_HOST_LZOP is not set
PTXCONF_BAREBOX_VEXPRESS=y
PTXCONF_BAREBOX_ARCH_STRING="arm"
# PTXCONF_BAREBOX is not set
diff --git a/configs/platform-v7a/rules/barebox-am335x-mlo.make b/configs/platform-v7a/rules/barebox-am335x-mlo.make
index e71d057..6835d35 100644
--- a/configs/platform-v7a/rules/barebox-am335x-mlo.make
+++ b/configs/platform-v7a/rules/barebox-am335x-mlo.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X_MLO) += barebox-am335x-mlo
#
# Paths and names
#
-BAREBOX_AM335X_MLO_VERSION := 2018.05.0
-BAREBOX_AM335X_MLO_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_AM335X_MLO_VERSION := 2018.11.0
+BAREBOX_AM335X_MLO_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_AM335X_MLO := barebox-$(BAREBOX_AM335X_MLO_VERSION)
BAREBOX_AM335X_MLO_SUFFIX := tar.bz2
BAREBOX_AM335X_MLO_DIR := $(BUILDDIR)/barebox-am335x-mlo-$(BAREBOX_AM335X_MLO_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-am335x.make b/configs/platform-v7a/rules/barebox-am335x.make
index 2c35ae1..8b3c2a0 100644
--- a/configs/platform-v7a/rules/barebox-am335x.make
+++ b/configs/platform-v7a/rules/barebox-am335x.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X) += barebox-am335x
#
# Paths and names
#
-BAREBOX_AM335X_VERSION := 2018.05.0
-BAREBOX_AM335X_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_AM335X_VERSION := 2018.11.0
+BAREBOX_AM335X_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_AM335X := barebox-$(BAREBOX_AM335X_VERSION)
BAREBOX_AM335X_SUFFIX := tar.bz2
BAREBOX_AM335X_DIR := $(BUILDDIR)/barebox-am335x-$(BAREBOX_AM335X_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-mx6.make b/configs/platform-v7a/rules/barebox-mx6.make
index 7d7c2ce..3b86ea0 100644
--- a/configs/platform-v7a/rules/barebox-mx6.make
+++ b/configs/platform-v7a/rules/barebox-mx6.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_MX6) += barebox-mx6
#
# Paths and names
#
-BAREBOX_MX6_VERSION := 2018.05.0
-BAREBOX_MX6_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_MX6_VERSION := 2018.11.0
+BAREBOX_MX6_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_MX6 := barebox-$(BAREBOX_MX6_VERSION)
BAREBOX_MX6_SUFFIX := tar.bz2
BAREBOX_MX6_DIR := $(BUILDDIR)/barebox-mx6-$(BAREBOX_MX6_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-rpi2.make b/configs/platform-v7a/rules/barebox-rpi2.make
index cf9fc00..41990a0 100644
--- a/configs/platform-v7a/rules/barebox-rpi2.make
+++ b/configs/platform-v7a/rules/barebox-rpi2.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_RPI2) += barebox-rpi2
#
# Paths and names
#
-BAREBOX_RPI2_VERSION := 2018.05.0
-BAREBOX_RPI2_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_RPI2_VERSION := 2018.11.0
+BAREBOX_RPI2_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_RPI2 := barebox-$(BAREBOX_RPI2_VERSION)
BAREBOX_RPI2_SUFFIX := tar.bz2
BAREBOX_RPI2_DIR := $(BUILDDIR)/barebox-rpi2-$(BAREBOX_RPI2_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-rpi3.make b/configs/platform-v7a/rules/barebox-rpi3.make
new file mode 100644
index 0000000..35b7e5b
--- /dev/null
+++ b/configs/platform-v7a/rules/barebox-rpi3.make
@@ -0,0 +1,104 @@
+# -*-makefile-*-
+#
+# Copyright (C) 2016 by Alexander Aring <aar@pengutronix.de>
+#
+# See CREDITS for details about who has contributed to this project.
+#
+# For further information about the PTXdist project and license conditions
+# see the README file.
+#
+
+#
+# We provide this package
+#
+PACKAGES-$(PTXCONF_BAREBOX_RPI3) += barebox-rpi3
+
+#
+# Paths and names
+#
+BAREBOX_RPI3_VERSION := 2018.11.0
+BAREBOX_RPI3_MD5 := 1472eae302647d1cf7f1c561a6380b43
+BAREBOX_RPI3 := barebox-$(BAREBOX_RPI3_VERSION)
+BAREBOX_RPI3_SUFFIX := tar.bz2
+BAREBOX_RPI3_DIR := $(BUILDDIR)/barebox-rpi3-$(BAREBOX_RPI3_VERSION)
+BAREBOX_RPI3_CONFIG := $(call ptx/in-platformconfigdir, barebox-rpi3.config)
+BAREBOX_RPI3_LICENSE := GPL-2.0
+BAREBOX_RPI3_URL := $(call barebox-url, BAREBOX_RPI3)
+BAREBOX_RPI3_SOURCE := $(SRCDIR)/$(BAREBOX_RPI3).$(BAREBOX_RPI3_SUFFIX)
+
+# ----------------------------------------------------------------------------
+# Prepare
+# ----------------------------------------------------------------------------
+
+BAREBOX_RPI3_WRAPPER_BLACKLIST := \
+ TARGET_HARDEN_RELRO \
+ TARGET_HARDEN_BINDNOW \
+ TARGET_HARDEN_PIE \
+ TARGET_DEBUG \
+ TARGET_BUILD_ID
+
+BAREBOX_RPI3_CONF_ENV := KCONFIG_NOTIMESTAMP=1
+BAREBOX_RPI3_CONF_OPT := $(call barebox-opts, BAREBOX_RPI3)
+
+BAREBOX_RPI3_MAKE_ENV := $(BAREBOX_RPI3_CONF_ENV)
+BAREBOX_RPI3_MAKE_OPT := $(BAREBOX_RPI3_CONF_OPT)
+
+BAREBOX_RPI3_IMAGES := images/barebox-raspberry-pi-3.img
+BAREBOX_RPI3_IMAGES := $(addprefix $(BAREBOX_RPI3_DIR)/,$(BAREBOX_RPI3_IMAGES))
+
+ifdef PTXCONF_BAREBOX_RPI3
+$(BAREBOX_RPI3_CONFIG):
+ @echo
+ @echo "****************************************************************************"
+ @echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-rpi3'"
+ @echo "****************************************************************************"
+ @echo
+ @echo
+ @exit 1
+endif
+
+$(STATEDIR)/barebox-rpi3.prepare: $(BAREBOX_RPI3_CONFIG)
+ @$(call targetinfo)
+ @rm -f "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
+ @ln -s "$(call ptx/in-platformconfigdir, barebox-rpi3-defaultenv)" \
+ "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
+ @$(call world/prepare, BAREBOX_RPI3)
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Install
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-rpi3.install:
+ @$(call targetinfo)
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Targetinstall
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-rpi3.targetinstall:
+ @$(call targetinfo)
+ @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
+ install -m 644 \
+ $(image) $(IMAGEDIR)/$(notdir $(image))-rpi3;)
+ @$(call touch)
+
+# ----------------------------------------------------------------------------
+# Clean
+# ----------------------------------------------------------------------------
+
+$(STATEDIR)/barebox-rpi3.clean:
+ @$(call targetinfo)
+ @$(call clean_pkg, BAREBOX_RPI3)
+ @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
+ rm -fv $(IMAGEDIR)/$(notdir $(image));)
+
+# ----------------------------------------------------------------------------
+# oldconfig / menuconfig
+# ----------------------------------------------------------------------------
+
+barebox-rpi3_oldconfig barebox-rpi3_menuconfig barebox-rpi3_nconfig: $(STATEDIR)/barebox-rpi3.extract
+ @$(call world/kconfig, BAREBOX_RPI3, $(subst barebox-rpi3_,,$@))
+
+# vim: syntax=make
diff --git a/configs/platform-v7a/rules/barebox-vexpress.make b/configs/platform-v7a/rules/barebox-vexpress.make
index 0266cbe..f69b6c5 100644
--- a/configs/platform-v7a/rules/barebox-vexpress.make
+++ b/configs/platform-v7a/rules/barebox-vexpress.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_VEXPRESS) += barebox-vexpress
#
# Paths and names
#
-BAREBOX_VEXPRESS_VERSION := 2018.05.0
-BAREBOX_VEXPRESS_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_VEXPRESS_VERSION := 2018.11.0
+BAREBOX_VEXPRESS_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_VEXPRESS := barebox-$(BAREBOX_VEXPRESS_VERSION)
BAREBOX_VEXPRESS_SUFFIX := tar.bz2
BAREBOX_VEXPRESS_DIR := $(BUILDDIR)/barebox-vexpress-$(BAREBOX_VEXPRESS_VERSION)
--
2.19.1
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0
2018-12-05 7:55 [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0 Rouven Czerwinski
@ 2018-12-05 13:15 ` Roland Hieber
2018-12-05 13:20 ` Rouven Czerwinski
2018-12-06 14:39 ` [DistroKit] [PATCH v2] " Rouven Czerwinski
1 sibling, 1 reply; 7+ messages in thread
From: Roland Hieber @ 2018-12-05 13:15 UTC (permalink / raw)
To: Rouven Czerwinski; +Cc: distrokit, Rouven Czerwinski
On Wed, Dec 05, 2018 at 08:55:42AM +0100, Rouven Czerwinski wrote:
> Drop the beaglebone patch, it will be resurrected in a distrokit-deployment
> layer.
> We also add the patch series for the rpi3 to barebox, it can be dropped
> in the next release.
>
> Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> ---
> .../platform-v7a/barebox-am335x-mlo.config | 22 +-
> configs/platform-v7a/barebox-am335x.config | 24 +-
> configs/platform-v7a/barebox-mx6.config | 32 +-
> configs/platform-v7a/barebox-rpi2.config | 23 +-
> .../barebox-rpi3-defaultenv/boot/9p | 10 +
> .../barebox-rpi3-defaultenv/init/bootsource | 13 +
> .../nv/linux.bootargs.loglevel | 1 +
> configs/platform-v7a/barebox-rpi3.config | 600 ++++++++++++++++++
> configs/platform-v7a/barebox-vexpress.config | 23 +-
> ...ne-add-state-entry-for-mmc0-and-mmc1.patch | 35 -
> ...ease-pengutronix-multi_v7-20180515-1.patch | 22 -
> .../patches/barebox-2018.05.0/series | 15 -
> ...ort-opcode-helpers-from-Linux-kernel.patch | 299 +++++++++
> ...tch-from-HYP-to-SVC-mode-if-required.patch | 88 +++
> ...-monitor-code-to-be-built-without-PS.patch | 37 ++
> ...-add-file-for-HYP-mode-related-setup.patch | 193 ++++++
> ...-install-secure-monitor-when-entered.patch | 30 +
> ...tarting-kernel-in-HYP-mode-when-ente.patch | 31 +
> ...HYP-vectors-at-PBL-and-Barebox-entry.patch | 105 +++
> ...sion-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch | 41 ++
> ...9-ARM-rpi-add-raspberry-pi-3-support.patch | 141 ++++
> .../0010-ARM-rpi-autosize-malloc-area.patch | 25 +
> ...RM-imx-add-support-for-Udoo-Neo-full.patch | 26 +-
> ...lease-pengutronix_multiv7-20181122-1.patch | 22 +
> .../patches/barebox-2018.11.0/series | 24 +
> configs/platform-v7a/platformconfig | 2 +
> .../rules/barebox-am335x-mlo.make | 4 +-
> .../platform-v7a/rules/barebox-am335x.make | 4 +-
> configs/platform-v7a/rules/barebox-mx6.make | 4 +-
> configs/platform-v7a/rules/barebox-rpi2.make | 4 +-
> configs/platform-v7a/rules/barebox-rpi3.make | 104 +++
Oh, RPi 3 now has its own barebox? Previously we used barebox-rpi2 for
both versions, what is the reason to change that?
- Roland
> .../platform-v7a/rules/barebox-vexpress.make | 4 +-
> 32 files changed, 1905 insertions(+), 103 deletions(-)
> create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> create mode 100644 configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> create mode 100644 configs/platform-v7a/barebox-rpi3.config
> delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/series
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> rename configs/platform-v7a/patches/{barebox-2018.05.0 => barebox-2018.11.0}/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch (93%)
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/series
> create mode 100644 configs/platform-v7a/rules/barebox-rpi3.make
>
> diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
> index 6cebecd..90adc2c 100644
> --- a/configs/platform-v7a/barebox-am335x-mlo.config
> +++ b/configs/platform-v7a/barebox-am335x-mlo.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> @@ -185,6 +185,7 @@ CONFIG_OF_GPIO=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
> @@ -337,6 +338,15 @@ CONFIG_BUS_OMAP_GPMC=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> # CONFIG_FS_CRAMFS is not set
> # CONFIG_FS_EXT4 is not set
> CONFIG_FS_RAMFS=y
> @@ -398,3 +408,13 @@ CONFIG_XYMODEM=y
> CONFIG_CRC16=y
> # CONFIG_DIGEST is not set
> # CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
> index 0c78012..0c3d7e5 100644
> --- a/configs/platform-v7a/barebox-am335x.config
> +++ b/configs/platform-v7a/barebox-am335x.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -408,6 +408,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_DRIVER_SERIAL_NS16550=y
> CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
> @@ -436,6 +437,7 @@ CONFIG_DRIVER_NET_CPSW=y
> #
> # CONFIG_AR8327N_PHY is not set
> # CONFIG_AT803X_PHY is not set
> +# CONFIG_DAVICOM_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> @@ -587,6 +589,7 @@ CONFIG_LED_GPIO_OF=y
> # CONFIG_LED_GPIO_RGB is not set
> # CONFIG_LED_GPIO_BICOLOR is not set
> CONFIG_LED_TRIGGERS=y
> +# CONFIG_LED_PCA955X is not set
>
> #
> # EEPROM support
> @@ -649,6 +652,15 @@ CONFIG_BUS_OMAP_GPMC=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -732,3 +744,13 @@ CONFIG_DIGEST_HMAC_GENERIC=y
> # CONFIG_DIGEST_SHA256_ARM is not set
> CONFIG_CRYPTO_RSA=y
> CONFIG_CRYPTO_KEYSTORE=y
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
> index 980b97b..536cbfe 100644
> --- a/configs/platform-v7a/barebox-mx6.config
> +++ b/configs/platform-v7a/barebox-mx6.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -94,13 +94,17 @@ CONFIG_MACH_UDOO_NEO=y
> # CONFIG_MACH_VARISCITE_MX6 is not set
> # CONFIG_MACH_GW_VENTANA is not set
> # CONFIG_MACH_CM_FX6 is not set
> +# CONFIG_MACH_ADVANTECH_ROM_742X is not set
> # CONFIG_MACH_WARP7 is not set
> # CONFIG_MACH_VF610_TWR is not set
> +# CONFIG_MACH_ZII_RDU1 is not set
> # CONFIG_MACH_ZII_RDU2 is not set
> # CONFIG_MACH_ZII_VF610_DEV is not set
> +# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
> # CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
> # CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
> # CONFIG_MACH_NXP_IMX6ULL_EVK is not set
> +# CONFIG_MACH_NXP_IMX8MQ_EVK is not set
>
> #
> # Board specific settings
> @@ -111,10 +115,7 @@ CONFIG_MACH_UDOO_NEO=y
> #
> CONFIG_IMX_IIM=y
> CONFIG_IMX_IIM_FUSE_BLOW=y
> -CONFIG_IMX_OCOTP=y
> -# CONFIG_IMX_OCOTP_WRITE is not set
> # CONFIG_HABV4 is not set
> -# CONFIG_ARCH_IMX_USBLOADER is not set
> CONFIG_ARM_ASM_UNIFIED=y
> CONFIG_AEABI=y
> CONFIG_THUMB2_BAREBOX=y
> @@ -464,6 +465,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_DRIVER_SERIAL_IMX=y
> # CONFIG_DRIVER_SERIAL_NS16550 is not set
> @@ -493,6 +495,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
> #
> # CONFIG_AR8327N_PHY is not set
> CONFIG_AT803X_PHY=y
> +# CONFIG_DAVICOM_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> CONFIG_MICREL_PHY=y
> @@ -681,6 +684,7 @@ CONFIG_LED_GPIO_OF=y
> # CONFIG_LED_GPIO_RGB is not set
> # CONFIG_LED_GPIO_BICOLOR is not set
> CONFIG_LED_TRIGGERS=y
> +# CONFIG_LED_PCA955X is not set
>
> #
> # EEPROM support
> @@ -762,6 +766,15 @@ CONFIG_USB_NOP_XCEIV=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -854,3 +867,14 @@ CONFIG_DIGEST_HMAC_GENERIC=y
> # CONFIG_DIGEST_SHA1_ARM is not set
> # CONFIG_DIGEST_SHA256_ARM is not set
> CONFIG_CRYPTO_KEYSTORE=y
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> +# CONFIG_ARCH_IMX_USBLOADER is not set
> diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
> index 74c52e9..0e2622f 100644
> --- a/configs/platform-v7a/barebox-rpi2.config
> +++ b/configs/platform-v7a/barebox-rpi2.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -54,6 +54,7 @@ CONFIG_MACH_RPI_COMMON=y
> #
> # CONFIG_MACH_RPI is not set
> CONFIG_MACH_RPI2=y
> +# CONFIG_MACH_RPI3 is not set
> CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_AEABI=y
> # CONFIG_THUMB2_BAREBOX is not set
> @@ -369,6 +370,7 @@ CONFIG_ARM_AMBA=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_SERIAL_AMBA_PL011=y
> # CONFIG_DRIVER_SERIAL_NS16550 is not set
> @@ -499,6 +501,15 @@ CONFIG_REGULATOR_BCM283X=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -575,3 +586,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
> # CONFIG_DIGEST_SHA1_ARM is not set
> # CONFIG_DIGEST_SHA256_ARM is not set
> # CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> new file mode 100644
> index 0000000..264ffec
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +
> +addpart /dev/nor0 "8M@32M(kernel)"
> +addpart /dev/nor0 "512k@40M(dtb)"
> +global.bootm.image="/dev/nor0.kernel"
> +global.bootm.oftree="/dev/nor0.dtb"
> +
> +global linux.bootargs.base="console=ttyAMA0,115200 loglevel=5 ptxdist-devel"
> +
> +global linux.bootargs.root="root=/dev/root rootfstype=9p rootflags=trans=virtio"
> \ No newline at end of file
> diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> new file mode 100644
> index 0000000..4de7163
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> @@ -0,0 +1,13 @@
> +#!/bin/sh
> +
> +if [ -n "$nv.boot.default" ]; then
> + exit
> +fi
> +
> +if [ $bootsource = mmc ]; then
> + global.boot.default="bootchooser net"
> +elif [ $bootsource = net ]; then
> + global.boot.default="net bootchooser"
> +else
> + global.boot.default="disk0.1 net"
> +fi
> diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> new file mode 100644
> index 0000000..705752c
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> @@ -0,0 +1 @@
> +loglevel=5 systemd.log_level=warning systemd.show_status=auto
> diff --git a/configs/platform-v7a/barebox-rpi3.config b/configs/platform-v7a/barebox-rpi3.config
> new file mode 100644
> index 0000000..0336bdf
> --- /dev/null
> +++ b/configs/platform-v7a/barebox-rpi3.config
> @@ -0,0 +1,600 @@
> +#
> +# Automatically generated file; DO NOT EDIT.
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> +#
> +CONFIG_ARM=y
> +CONFIG_ARM_LINUX=y
> +CONFIG_TEXT_BASE=0x0
> +
> +#
> +# System Type
> +#
> +# CONFIG_ARCH_AT91 is not set
> +CONFIG_ARCH_BCM283X=y
> +# CONFIG_ARCH_CLPS711X is not set
> +# CONFIG_ARCH_DAVINCI is not set
> +# CONFIG_ARCH_DIGIC is not set
> +# CONFIG_ARCH_EP93XX is not set
> +# CONFIG_ARCH_HIGHBANK is not set
> +# CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_MVEBU is not set
> +# CONFIG_ARCH_MXS is not set
> +# CONFIG_ARCH_NETX is not set
> +# CONFIG_ARCH_NOMADIK is not set
> +# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_PXA is not set
> +# CONFIG_ARCH_ROCKCHIP is not set
> +# CONFIG_ARCH_SOCFPGA is not set
> +# CONFIG_ARCH_S3C24xx is not set
> +# CONFIG_ARCH_S5PCxx is not set
> +# CONFIG_ARCH_S3C64xx is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +# CONFIG_ARCH_VEXPRESS is not set
> +# CONFIG_ARCH_TEGRA is not set
> +# CONFIG_ARCH_UEMD is not set
> +# CONFIG_ARCH_ZYNQ is not set
> +# CONFIG_ARCH_QEMU is not set
> +
> +#
> +# Processor Type
> +#
> +CONFIG_CPU_32=y
> +CONFIG_CPU_V7=y
> +CONFIG_CPU_32v7=y
> +
> +#
> +# processor features
> +#
> +# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> +CONFIG_ARCH_TEXT_BASE=0x0
> +CONFIG_MACH_RPI_COMMON=y
> +
> +#
> +# select Broadcom BCM283X boards to be built
> +#
> +# CONFIG_MACH_RPI is not set
> +# CONFIG_MACH_RPI2 is not set
> +CONFIG_MACH_RPI3=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> +CONFIG_AEABI=y
> +# CONFIG_THUMB2_BAREBOX is not set
> +# CONFIG_ARM_BOARD_APPEND_ATAG is not set
> +
> +#
> +# ARM specific settings
> +#
> +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> +CONFIG_ARM_EXCEPTIONS=y
> +CONFIG_ARM_UNWIND=y
> +# CONFIG_ARM_SEMIHOSTING is not set
> +CONFIG_ARM_SMCCC=y
> +CONFIG_ARM_SECURE_MONITOR=y
> +# CONFIG_ARM_PSCI is not set
> +CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
> +CONFIG_GREGORIAN_CALENDER=y
> +CONFIG_HAS_KALLSYMS=y
> +CONFIG_HAS_MODULES=y
> +CONFIG_HAS_CACHE=y
> +CONFIG_HAS_DMA=y
> +CONFIG_GENERIC_GPIO=y
> +CONFIG_BLOCK=y
> +CONFIG_BLOCK_WRITE=y
> +CONFIG_FILETYPE=y
> +CONFIG_BINFMT=y
> +CONFIG_UIMAGE=y
> +CONFIG_STDDEV=y
> +CONFIG_BOOT=y
> +
> +#
> +# General Settings
> +#
> +CONFIG_LOCALVERSION=""
> +CONFIG_LOCALVERSION_AUTO=y
> +CONFIG_BANNER=y
> +CONFIG_MEMINFO=y
> +CONFIG_ENVIRONMENT_VARIABLES=y
> +CONFIG_GLOBALVAR=y
> +CONFIG_NVVAR=y
> +
> +#
> +# memory layout
> +#
> +CONFIG_HAVE_PBL_IMAGE=y
> +CONFIG_HAVE_PBL_MULTI_IMAGES=y
> +CONFIG_HAVE_IMAGE_COMPRESSION=y
> +CONFIG_PBL_IMAGE=y
> +CONFIG_PBL_MULTI_IMAGES=y
> +CONFIG_PBL_RELOCATABLE=y
> +CONFIG_IMAGE_COMPRESSION=y
> +# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
> +# CONFIG_IMAGE_COMPRESSION_LZO is not set
> +# CONFIG_IMAGE_COMPRESSION_GZIP is not set
> +# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
> +CONFIG_IMAGE_COMPRESSION_NONE=y
> +CONFIG_MMU=y
> +CONFIG_MMU_EARLY=y
> +CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> +CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> +CONFIG_BAREBOX_MAX_PBLX_SIZE=0xffffffff
> +CONFIG_STACK_SIZE=0x8000
> +CONFIG_MALLOC_SIZE=0x0
> +# CONFIG_EXPERIMENTAL is not set
> +# CONFIG_MALLOC_DLMALLOC is not set
> +CONFIG_MALLOC_TLSF=y
> +CONFIG_KALLSYMS=y
> +CONFIG_RELOCATABLE=y
> +# CONFIG_PANIC_HANG is not set
> +CONFIG_PROMPT="R-Pi> "
> +CONFIG_BAUDRATE=115200
> +CONFIG_CBSIZE=1024
> +CONFIG_SHELL_HUSH=y
> +# CONFIG_SHELL_SIMPLE is not set
> +# CONFIG_SHELL_NONE is not set
> +CONFIG_GLOB=y
> +CONFIG_GLOB_SORT=y
> +CONFIG_PROMPT_HUSH_PS2="> "
> +CONFIG_HUSH_FANCY_PROMPT=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_MENU=y
> +CONFIG_PASSWORD=y
> +CONFIG_PASSWORD_DEFAULT=""
> +CONFIG_PASSWD_SUM_MD5=y
> +# CONFIG_PASSWD_SUM_SHA1 is not set
> +# CONFIG_PASSWD_SUM_SHA256 is not set
> +# CONFIG_PASSWD_SUM_SHA512 is not set
> +# CONFIG_PASSWD_CRYPTO_PBKDF2 is not set
> +CONFIG_DYNAMIC_CRC_TABLE=y
> +CONFIG_ERRNO_MESSAGES=y
> +CONFIG_TIMESTAMP=y
> +CONFIG_BOOTM=y
> +CONFIG_BOOTM_SHOW_TYPE=y
> +CONFIG_BOOTM_VERBOSE=y
> +CONFIG_BOOTM_INITRD=y
> +CONFIG_BOOTM_OFTREE=y
> +# CONFIG_BOOTM_OFTREE_UIMAGE is not set
> +# CONFIG_BOOTM_AIMAGE is not set
> +# CONFIG_BOOTM_FITIMAGE is not set
> +CONFIG_BLSPEC=y
> +CONFIG_FLEXIBLE_BOOTARGS=y
> +# CONFIG_IMD is not set
> +# CONFIG_KERNEL_INSTALL_TARGET is not set
> +CONFIG_CONSOLE_FULL=y
> +# CONFIG_CONSOLE_SIMPLE is not set
> +# CONFIG_CONSOLE_NONE is not set
> +CONFIG_CONSOLE_ACTIVATE_FIRST=y
> +# CONFIG_CONSOLE_ACTIVATE_ALL is not set
> +# CONFIG_CONSOLE_ACTIVATE_NONE is not set
> +# CONFIG_CONSOLE_ALLOW_COLOR is not set
> +# CONFIG_PBL_CONSOLE is not set
> +# CONFIG_CONSOLE_RATP is not set
> +CONFIG_PARTITION=y
> +CONFIG_PARTITION_DISK=y
> +CONFIG_PARTITION_DISK_DOS=y
> +# CONFIG_PARTITION_DISK_EFI is not set
> +CONFIG_ENV_HANDLING=y
> +CONFIG_DEFAULT_ENVIRONMENT=y
> +CONFIG_DEFAULT_COMPRESSION_NONE=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
> +# CONFIG_BAREBOXENV_TARGET is not set
> +# CONFIG_BAREBOXCRC32_TARGET is not set
> +CONFIG_POLLER=y
> +# CONFIG_STATE is not set
> +# CONFIG_BOOTCHOOSER is not set
> +# CONFIG_RESET_SOURCE is not set
> +
> +#
> +# Debugging
> +#
> +CONFIG_COMPILE_LOGLEVEL=6
> +CONFIG_DEFAULT_LOGLEVEL=7
> +# CONFIG_DEBUG_INFO is not set
> +# CONFIG_DEBUG_LL is not set
> +# CONFIG_DEBUG_INITCALLS is not set
> +CONFIG_HAS_DEBUG_LL=y
> +CONFIG_COMMAND_SUPPORT=y
> +CONFIG_COMPILE_HASH=y
> +CONFIG_COMPILE_MEMORY=y
> +
> +#
> +# Commands
> +#
> +
> +#
> +# Information
> +#
> +CONFIG_CMD_ARM_CPUINFO=y
> +CONFIG_CMD_DEVINFO=y
> +# CONFIG_CMD_DMESG is not set
> +CONFIG_CMD_DRVINFO=y
> +CONFIG_CMD_HELP=y
> +CONFIG_LONGHELP=y
> +CONFIG_CMD_IOMEM=y
> +# CONFIG_CMD_IMD is not set
> +CONFIG_CMD_MEMINFO=y
> +# CONFIG_CMD_ARM_MMUINFO is not set
> +# CONFIG_CMD_REGULATOR is not set
> +CONFIG_CMD_VERSION=y
> +# CONFIG_CMD_MMC_EXTCSD is not set
> +
> +#
> +# Boot
> +#
> +CONFIG_CMD_BOOT=y
> +CONFIG_CMD_BOOTM=y
> +CONFIG_CMD_BOOTU=y
> +# CONFIG_CMD_BOOTZ is not set
> +CONFIG_CMD_GO=y
> +CONFIG_CMD_LOADB=y
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_LOADY=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_UIMAGE=y
> +
> +#
> +# Partition
> +#
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_AUTOMOUNT=y
> +CONFIG_CMD_MOUNT=y
> +CONFIG_CMD_UMOUNT=y
> +
> +#
> +# Environment
> +#
> +CONFIG_CMD_NV=y
> +CONFIG_CMD_EXPORT=y
> +# CONFIG_CMD_DEFAULTENV is not set
> +CONFIG_CMD_GLOBAL=y
> +# CONFIG_CMD_LOADENV is not set
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_MAGICVAR=y
> +CONFIG_CMD_MAGICVAR_HELP=y
> +CONFIG_CMD_SAVEENV=y
> +
> +#
> +# File
> +#
> +CONFIG_CMD_BASENAME=y
> +CONFIG_CMD_CAT=y
> +CONFIG_CMD_CD=y
> +CONFIG_CMD_CP=y
> +# CONFIG_CMD_CMP is not set
> +CONFIG_CMD_DIGEST=y
> +CONFIG_CMD_DIRNAME=y
> +CONFIG_CMD_FILETYPE=y
> +CONFIG_CMD_LN=y
> +CONFIG_CMD_LS=y
> +CONFIG_CMD_MD5SUM=y
> +CONFIG_CMD_MKDIR=y
> +CONFIG_CMD_PWD=y
> +CONFIG_CMD_READLINK=y
> +CONFIG_CMD_RM=y
> +CONFIG_CMD_RMDIR=y
> +# CONFIG_CMD_SHA1SUM is not set
> +# CONFIG_CMD_SHA224SUM is not set
> +# CONFIG_CMD_SHA256SUM is not set
> +# CONFIG_CMD_SHA384SUM is not set
> +# CONFIG_CMD_SHA512SUM is not set
> +CONFIG_CMD_UNCOMPRESS=y
> +
> +#
> +# Shell scripting
> +#
> +CONFIG_CMD_FALSE=y
> +CONFIG_CMD_GETOPT=y
> +CONFIG_CMD_LET=y
> +CONFIG_CMD_MSLEEP=y
> +# CONFIG_CMD_READF is not set
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_TEST=y
> +CONFIG_CMD_TRUE=y
> +
> +#
> +# Console and Framebuffer interaction
> +#
> +CONFIG_CMD_CLEAR=y
> +CONFIG_CMD_ECHO=y
> +CONFIG_CMD_ECHO_E=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_LOGIN=y
> +CONFIG_CMD_MENU=y
> +CONFIG_CMD_MENU_MANAGEMENT=y
> +# CONFIG_CMD_MENUTREE is not set
> +CONFIG_CMD_PASSWD=y
> +CONFIG_PASSWD_MODE_HIDE=y
> +# CONFIG_PASSWD_MODE_STAR is not set
> +# CONFIG_PASSWD_MODE_CLEAR is not set
> +CONFIG_CMD_READLINE=y
> +CONFIG_CMD_TIMEOUT=y
> +
> +#
> +# Memory
> +#
> +CONFIG_CMD_CRC=y
> +CONFIG_CMD_CRC_CMP=y
> +CONFIG_CMD_MD=y
> +CONFIG_CMD_MEMCMP=y
> +CONFIG_CMD_MEMCPY=y
> +CONFIG_CMD_MEMSET=y
> +# CONFIG_CMD_MEMTEST is not set
> +CONFIG_CMD_MM=y
> +CONFIG_CMD_MW=y
> +
> +#
> +# Hardware manipulation
> +#
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_DETECT=y
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_GPIO=y
> +# CONFIG_CMD_LED is not set
> +# CONFIG_CMD_POWEROFF is not set
> +# CONFIG_CMD_SPI is not set
> +# CONFIG_CMD_LED_TRIGGER is not set
> +CONFIG_CMD_WD=y
> +CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> +
> +#
> +# Miscellaneous
> +#
> +# CONFIG_CMD_2048 is not set
> +# CONFIG_CMD_BAREBOX_UPDATE is not set
> +# CONFIG_CMD_FIRMWARELOAD is not set
> +CONFIG_CMD_OF_DUMP=y
> +CONFIG_CMD_OF_NODE=y
> +CONFIG_CMD_OF_PROPERTY=y
> +# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
> +# CONFIG_CMD_OF_FIXUP_STATUS is not set
> +CONFIG_CMD_OFTREE=y
> +CONFIG_CMD_TIME=y
> +# CONFIG_CMD_DHRYSTONE is not set
> +# CONFIG_CMD_SPD_DECODE is not set
> +# CONFIG_CMD_SEED is not set
> +# CONFIG_NET is not set
> +
> +#
> +# Drivers
> +#
> +CONFIG_OFTREE=y
> +CONFIG_OFTREE_MEM_GENERIC=y
> +CONFIG_DTC=y
> +CONFIG_OFDEVICE=y
> +CONFIG_OF_GPIO=y
> +# CONFIG_OF_BAREBOX_DRIVERS is not set
> +# CONFIG_AIODEV is not set
> +CONFIG_ARM_AMBA=y
> +
> +#
> +# serial drivers
> +#
> +# CONFIG_SERIAL_DEV_BUS is not set
> +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> +CONFIG_SERIAL_AMBA_PL011=y
> +# CONFIG_DRIVER_SERIAL_NS16550 is not set
> +# CONFIG_DRIVER_SERIAL_CADENCE is not set
> +
> +#
> +# SPI drivers
> +#
> +CONFIG_SPI=y
> +# CONFIG_DRIVER_SPI_GPIO is not set
> +# CONFIG_I2C is not set
> +# CONFIG_MTD is not set
> +CONFIG_DISK=y
> +CONFIG_DISK_WRITE=y
> +
> +#
> +# drive types
> +#
> +# CONFIG_DISK_ATA is not set
> +# CONFIG_DISK_AHCI is not set
> +
> +#
> +# interface types
> +#
> +# CONFIG_DISK_INTF_PLATFORM_IDE is not set
> +# CONFIG_USB_HOST is not set
> +# CONFIG_USB_GADGET is not set
> +# CONFIG_USB_MUSB is not set
> +# CONFIG_VIDEO is not set
> +CONFIG_MCI=y
> +
> +#
> +# --- Feature list ---
> +#
> +# CONFIG_MCI_STARTUP is not set
> +CONFIG_MCI_INFO=y
> +CONFIG_MCI_WRITE=y
> +# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> +
> +#
> +# --- MCI host drivers ---
> +#
> +# CONFIG_MCI_DW is not set
> +CONFIG_MCI_BCM283X=y
> +# CONFIG_MCI_MMCI is not set
> +# CONFIG_MCI_SPI is not set
> +CONFIG_HAVE_CLK=y
> +CONFIG_CLKDEV_LOOKUP=y
> +CONFIG_COMMON_CLK=y
> +CONFIG_CLOCKSOURCE_BCM283X=y
> +CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
> +
> +#
> +# MFD
> +#
> +# CONFIG_MFD_MC13XXX is not set
> +# CONFIG_MFD_SYSCON is not set
> +
> +#
> +# Misc devices
> +#
> +# CONFIG_JTAG is not set
> +# CONFIG_SRAM is not set
> +CONFIG_LED=y
> +CONFIG_LED_GPIO=y
> +# CONFIG_LED_GPIO_OF is not set
> +# CONFIG_LED_GPIO_RGB is not set
> +# CONFIG_LED_GPIO_BICOLOR is not set
> +CONFIG_LED_TRIGGERS=y
> +
> +#
> +# EEPROM support
> +#
> +# CONFIG_EEPROM_AT25 is not set
> +
> +#
> +# Input device support
> +#
> +# CONFIG_KEYBOARD_GPIO is not set
> +CONFIG_WATCHDOG=y
> +# CONFIG_WATCHDOG_POLLER is not set
> +# CONFIG_WATCHDOG_DW is not set
> +CONFIG_WATCHDOG_BCM2835=y
> +# CONFIG_PWM is not set
> +# CONFIG_HWRNG is not set
> +
> +#
> +# DMA support
> +#
> +CONFIG_GPIOLIB=y
> +
> +#
> +# GPIO
> +#
> +# CONFIG_GPIO_74164 is not set
> +CONFIG_GPIO_BCM283X=y
> +# CONFIG_GPIO_GENERIC_PLATFORM is not set
> +# CONFIG_GPIO_IMX is not set
> +# CONFIG_GPIO_VF610 is not set
> +# CONFIG_GPIO_MXS is not set
> +# CONFIG_GPIO_OMAP is not set
> +# CONFIG_GPIO_PL061 is not set
> +# CONFIG_GPIO_DESIGNWARE is not set
> +# CONFIG_W1 is not set
> +# CONFIG_PINCTRL is not set
> +# CONFIG_NVMEM is not set
> +
> +#
> +# Bus devices
> +#
> +CONFIG_REGULATOR=y
> +# CONFIG_REGULATOR_FIXED is not set
> +CONFIG_REGULATOR_BCM283X=y
> +# CONFIG_RESET_CONTROLLER is not set
> +# CONFIG_RTC_CLASS is not set
> +
> +#
> +# Firmware Drivers
> +#
> +# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> +# CONFIG_GENERIC_PHY is not set
> +# CONFIG_CRYPTO_HW is not set
> +
> +#
> +# Memory controller drivers
> +#
> +
> +#
> +# Filesystem support
> +#
> +CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> +CONFIG_FS_AUTOMOUNT=y
> +# CONFIG_FS_CRAMFS is not set
> +CONFIG_FS_EXT4=y
> +CONFIG_FS_RAMFS=y
> +CONFIG_FS_DEVFS=y
> +CONFIG_FS_FAT=y
> +CONFIG_FS_FAT_WRITE=y
> +CONFIG_FS_FAT_LFN=y
> +# CONFIG_FS_BPKFS is not set
> +# CONFIG_FS_UIMAGEFS is not set
> +# CONFIG_FS_PSTORE is not set
> +# CONFIG_FS_SQUASHFS is not set
> +
> +#
> +# ZLIB support disabled
> +#
> +
> +#
> +# LZ4 support disabled
> +#
> +
> +#
> +# LZO support disabled
> +#
> +
> +#
> +# XZ support disabled
> +#
> +
> +#
> +# ZSTD support disabled
> +#
> +
> +#
> +# Library routines
> +#
> +CONFIG_PARAMETER=y
> +CONFIG_UNCOMPRESS=y
> +# CONFIG_ZLIB is not set
> +# CONFIG_BZLIB is not set
> +# CONFIG_LZ4_DECOMPRESS is not set
> +# CONFIG_ZSTD_DECOMPRESS is not set
> +# CONFIG_XZ_DECOMPRESS is not set
> +# CONFIG_GENERIC_FIND_NEXT_BIT is not set
> +CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> +# CONFIG_LZO_DECOMPRESS is not set
> +CONFIG_FNMATCH=y
> +CONFIG_QSORT=y
> +CONFIG_XYMODEM=y
> +# CONFIG_RATP is not set
> +# CONFIG_ALLOW_PRNG_FALLBACK is not set
> +# CONFIG_CRC_CCITT is not set
> +
> +#
> +# Library gui routines
> +#
> +# CONFIG_BAREBOX_LOGO is not set
> +
> +#
> +# Crypto support
> +#
> +CONFIG_CRC32=y
> +CONFIG_CRC16=y
> +CONFIG_DIGEST=y
> +CONFIG_MD5=y
> +CONFIG_SHA1=y
> +CONFIG_SHA256=y
> +# CONFIG_DIGEST_CRC32_GENERIC is not set
> +CONFIG_DIGEST_MD5_GENERIC=y
> +CONFIG_DIGEST_SHA1_GENERIC=y
> +# CONFIG_DIGEST_SHA224_GENERIC is not set
> +CONFIG_DIGEST_SHA256_GENERIC=y
> +# CONFIG_DIGEST_SHA384_GENERIC is not set
> +# CONFIG_DIGEST_SHA512_GENERIC is not set
> +# CONFIG_DIGEST_HMAC_GENERIC is not set
> +# CONFIG_DIGEST_SHA1_ARM is not set
> +# CONFIG_DIGEST_SHA256_ARM is not set
> +# CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
> index 826d222..72d5421 100644
> --- a/configs/platform-v7a/barebox-vexpress.config
> +++ b/configs/platform-v7a/barebox-vexpress.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2018.05.0-20180515-1 Configuration
> +# Barebox/arm 2018.11.0-20181122-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -364,6 +364,7 @@ CONFIG_ARM_AMBA=y
> #
> # serial drivers
> #
> +# CONFIG_SERIAL_DEV_BUS is not set
> # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> CONFIG_SERIAL_AMBA_PL011=y
> # CONFIG_DRIVER_SERIAL_NS16550 is not set
> @@ -389,6 +390,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> #
> # CONFIG_AR8327N_PHY is not set
> # CONFIG_AT803X_PHY is not set
> +# CONFIG_DAVICOM_PHY is not set
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> @@ -522,6 +524,15 @@ CONFIG_STATE_DRV=y
> # Filesystem support
> #
> CONFIG_FS=y
> +CONFIG_FS_LEGACY=y
> +
> +#
> +# Some selected filesystems still use the legacy FS API.
> +#
> +
> +#
> +# Consider updating them.
> +#
> CONFIG_FS_AUTOMOUNT=y
> # CONFIG_FS_CRAMFS is not set
> CONFIG_FS_EXT4=y
> @@ -599,3 +610,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
> # CONFIG_DIGEST_SHA1_ARM is not set
> # CONFIG_DIGEST_SHA256_ARM is not set
> # CONFIG_CRYPTO_KEYSTORE is not set
> +
> +#
> +# Firmware files
> +#
> +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +
> +#
> +# Host Tools
> +#
> +# CONFIG_COMPILE_HOST_TOOLS is not set
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> deleted file mode 100644
> index cfca106..0000000
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> +++ /dev/null
> @@ -1,35 +0,0 @@
> -From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> -Date: Fri, 10 Jun 2016 14:02:30 +0200
> -Subject: [PATCH] beaglebone: add state entry for mmc0 and mmc1
> -
> -Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> ----
> - arch/arm/dts/am335x-bone-common.dtsi | 15 +++++++++++++++
> - 1 file changed, 15 insertions(+)
> -
> -diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi
> -index 0413724e0ca1..6e58714516fd 100644
> ---- a/arch/arm/dts/am335x-bone-common.dtsi
> -+++ b/arch/arm/dts/am335x-bone-common.dtsi
> -@@ -11,6 +11,21 @@
> - linux,stdout-path = &uart0;
> - };
> -
> -+ bootstate: bootstate {
> -+ compatible = "barebox,bootstate";
> -+ backend-type = "nv";
> -+
> -+ system0 {
> -+ default_attempts = <3>;
> -+ boot = "mmc0";
> -+ };
> -+
> -+ system1 {
> -+ default_attempts = <3>;
> -+ boot = "mmc1";
> -+ };
> -+ };
> -+
> - cpus {
> - cpu@0 {
> - cpu0-supply = <&dcdc2_reg>;
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> deleted file mode 100644
> index 4b0c22d..0000000
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -From: Roland Hieber <r.hieber@pengutronix.de>
> -Date: Tue, 15 May 2018 23:44:48 +0200
> -Subject: [PATCH] Release pengutronix/multi_v7/20180515-1
> -
> -Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> ----
> - Makefile | 2 +-
> - 1 file changed, 1 insertion(+), 1 deletion(-)
> -
> -diff --git a/Makefile b/Makefile
> -index 88c19917394f..11e79cc339f4 100644
> ---- a/Makefile
> -+++ b/Makefile
> -@@ -1,7 +1,7 @@
> - VERSION = 2018
> - PATCHLEVEL = 05
> - SUBLEVEL = 0
> --EXTRAVERSION =
> -+EXTRAVERSION =-20180515-1
> - NAME = None
> -
> - # *DOCUMENTATION*
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/series b/configs/platform-v7a/patches/barebox-2018.05.0/series
> deleted file mode 100644
> index 272791c..0000000
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/series
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -# umpf-base: v2018.05.0
> -# umpf-name: pengutronix/multi_v7
> -# umpf-version: pengutronix/multi_v7/20180515-1
> -# umpf-topic: v2018.05.0/customers/pengutronix/beaglebone
> -# umpf-hashinfo: d1f50bff60c7069caad2df4ef02f672be456f141
> -# umpf-topic-range: cd4320e3e86bd2ab7b4a19016ef8df6c5d69a5a5..d1f50bff60c7069caad2df4ef02f672be456f141
> -0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> -# umpf-topic: v2018.05.0/customers/pengutronix/udoo-neo
> -# umpf-hashinfo: 772e5039c9a147256a085c76a74cf5cb5c14ec35
> -# umpf-topic-range: d1f50bff60c7069caad2df4ef02f672be456f141..183d8e8d0ccf827481923b3872144e2c10ef9fac
> -0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> -# umpf-release: pengutronix/multi_v7/20180515-1
> -# umpf-topic-range: 183d8e8d0ccf827481923b3872144e2c10ef9fac..734e18abc455f563837dd6ad0df6fb9378053b00
> -0201-Release-pengutronix-multi_v7-20180515-1.patch
> -# umpf-end
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> new file mode 100644
> index 0000000..bd459d0
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> @@ -0,0 +1,299 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:37 +0100
> +Subject: [PATCH] ARM: import opcode helpers from Linux kernel
> +
> +Those are needed to generate some of the ARM SEC and VIRT
> +opcodes in a portable way.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/include/asm/opcodes-virt.h | 39 +++++
> + arch/arm/include/asm/opcodes.h | 231 ++++++++++++++++++++++++++++
> + 2 files changed, 270 insertions(+)
> + create mode 100644 arch/arm/include/asm/opcodes-virt.h
> + create mode 100644 arch/arm/include/asm/opcodes.h
> +
> +diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h
> +new file mode 100644
> +index 000000000000..efcfdf92d9d5
> +--- /dev/null
> ++++ b/arch/arm/include/asm/opcodes-virt.h
> +@@ -0,0 +1,39 @@
> ++/*
> ++ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
> ++ * Copyright (C) 2012 Linaro Limited
> ++ *
> ++ * This program is free software; you can redistribute it and/or modify
> ++ * it under the terms of the GNU General Public License as published by
> ++ * the Free Software Foundation; either version 2 of the License, or
> ++ * (at your option) any later version.
> ++ *
> ++ * This program is distributed in the hope that it will be useful,
> ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> ++ * GNU General Public License for more details.
> ++ *
> ++ * You should have received a copy of the GNU General Public License along
> ++ * with this program; if not, write to the Free Software Foundation, Inc.,
> ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> ++ */
> ++#ifndef __ASM_ARM_OPCODES_VIRT_H
> ++#define __ASM_ARM_OPCODES_VIRT_H
> ++
> ++#include <asm/opcodes.h>
> ++
> ++#define __HVC(imm16) __inst_arm_thumb32( \
> ++ 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \
> ++ 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \
> ++)
> ++
> ++#define __ERET __inst_arm_thumb32( \
> ++ 0xE160006E, \
> ++ 0xF3DE8F00 \
> ++)
> ++
> ++#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \
> ++ 0xE12EF300 | regnum, \
> ++ 0xF3808E30 | (regnum << 16) \
> ++)
> ++
> ++#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
> +diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
> +new file mode 100644
> +index 000000000000..a78bf5d2c518
> +--- /dev/null
> ++++ b/arch/arm/include/asm/opcodes.h
> +@@ -0,0 +1,231 @@
> ++/*
> ++ * arch/arm/include/asm/opcodes.h
> ++ *
> ++ * This program is free software; you can redistribute it and/or modify
> ++ * it under the terms of the GNU General Public License version 2 as
> ++ * published by the Free Software Foundation.
> ++ */
> ++
> ++#ifndef __ASM_ARM_OPCODES_H
> ++#define __ASM_ARM_OPCODES_H
> ++
> ++#ifndef __ASSEMBLY__
> ++#include <linux/linkage.h>
> ++extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
> ++#endif
> ++
> ++#define ARM_OPCODE_CONDTEST_FAIL 0
> ++#define ARM_OPCODE_CONDTEST_PASS 1
> ++#define ARM_OPCODE_CONDTEST_UNCOND 2
> ++
> ++
> ++/*
> ++ * Assembler opcode byteswap helpers.
> ++ * These are only intended for use by this header: don't use them directly,
> ++ * because they will be suboptimal in most cases.
> ++ */
> ++#define ___asm_opcode_swab32(x) ( \
> ++ (((x) << 24) & 0xFF000000) \
> ++ | (((x) << 8) & 0x00FF0000) \
> ++ | (((x) >> 8) & 0x0000FF00) \
> ++ | (((x) >> 24) & 0x000000FF) \
> ++)
> ++#define ___asm_opcode_swab16(x) ( \
> ++ (((x) << 8) & 0xFF00) \
> ++ | (((x) >> 8) & 0x00FF) \
> ++)
> ++#define ___asm_opcode_swahb32(x) ( \
> ++ (((x) << 8) & 0xFF00FF00) \
> ++ | (((x) >> 8) & 0x00FF00FF) \
> ++)
> ++#define ___asm_opcode_swahw32(x) ( \
> ++ (((x) << 16) & 0xFFFF0000) \
> ++ | (((x) >> 16) & 0x0000FFFF) \
> ++)
> ++#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
> ++#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
> ++
> ++
> ++/*
> ++ * Opcode byteswap helpers
> ++ *
> ++ * These macros help with converting instructions between a canonical integer
> ++ * format and in-memory representation, in an endianness-agnostic manner.
> ++ *
> ++ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
> ++ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
> ++ *
> ++ *
> ++ * Canonical instruction representation:
> ++ *
> ++ * ARM: 0xKKLLMMNN
> ++ * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8
> ++ * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8
> ++ *
> ++ * There is no way to distinguish an ARM instruction in canonical representation
> ++ * from a Thumb instruction (just as these cannot be distinguished in memory).
> ++ * Where this distinction is important, it needs to be tracked separately.
> ++ *
> ++ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
> ++ * represent any valid Thumb-2 instruction. For this range,
> ++ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
> ++ *
> ++ * The ___asm variants are intended only for use by this header, in situations
> ++ * involving inline assembler. For .S files, the normal __opcode_*() macros
> ++ * should do the right thing.
> ++ */
> ++#ifdef __ASSEMBLY__
> ++
> ++#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
> ++#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
> ++#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
> ++#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
> ++#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
> ++#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
> ++
> ++#else /* ! __ASSEMBLY__ */
> ++
> ++#include <linux/types.h>
> ++#include <linux/swab.h>
> ++
> ++#define ___opcode_swab32(x) swab32(x)
> ++#define ___opcode_swab16(x) swab16(x)
> ++#define ___opcode_swahb32(x) swahb32(x)
> ++#define ___opcode_swahw32(x) swahw32(x)
> ++#define ___opcode_identity32(x) ((u32)(x))
> ++#define ___opcode_identity16(x) ((u16)(x))
> ++
> ++#endif /* ! __ASSEMBLY__ */
> ++
> ++
> ++#ifdef CONFIG_CPU_ENDIAN_BE8
> ++
> ++#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
> ++#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
> ++#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
> ++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
> ++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
> ++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
> ++
> ++#else /* ! CONFIG_CPU_ENDIAN_BE8 */
> ++
> ++#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
> ++#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
> ++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
> ++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
> ++#ifndef CONFIG_CPU_ENDIAN_BE32
> ++/*
> ++ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
> ++ * work in all cases, due to alignment constraints. For now, a correct
> ++ * version is not provided for BE32.
> ++ */
> ++#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
> ++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
> ++#endif
> ++
> ++#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
> ++
> ++#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
> ++#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
> ++#ifndef CONFIG_CPU_ENDIAN_BE32
> ++#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
> ++#endif
> ++
> ++/* Operations specific to Thumb opcodes */
> ++
> ++/* Instruction size checks: */
> ++#define __opcode_is_thumb32(x) ( \
> ++ ((x) & 0xF8000000) == 0xE8000000 \
> ++ || ((x) & 0xF0000000) == 0xF0000000 \
> ++)
> ++#define __opcode_is_thumb16(x) ( \
> ++ ((x) & 0xFFFF0000) == 0 \
> ++ && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \
> ++)
> ++
> ++/* Operations to construct or split 32-bit Thumb instructions: */
> ++#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
> ++#define __opcode_thumb32_second(x) (___opcode_identity16(x))
> ++#define __opcode_thumb32_compose(first, second) ( \
> ++ (___opcode_identity32(___opcode_identity16(first)) << 16) \
> ++ | ___opcode_identity32(___opcode_identity16(second)) \
> ++)
> ++#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
> ++#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
> ++#define ___asm_opcode_thumb32_compose(first, second) ( \
> ++ (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
> ++ | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \
> ++)
> ++
> ++/*
> ++ * Opcode injection helpers
> ++ *
> ++ * In rare cases it is necessary to assemble an opcode which the
> ++ * assembler does not support directly, or which would normally be
> ++ * rejected because of the CFLAGS or AFLAGS used to build the affected
> ++ * file.
> ++ *
> ++ * Before using these macros, consider carefully whether it is feasible
> ++ * instead to change the build flags for your file, or whether it really
> ++ * makes sense to support old assembler versions when building that
> ++ * particular kernel feature.
> ++ *
> ++ * The macros defined here should only be used where there is no viable
> ++ * alternative.
> ++ *
> ++ *
> ++ * __inst_arm(x): emit the specified ARM opcode
> ++ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
> ++ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
> ++ *
> ++ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
> ++ * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2
> ++ * kernel is being built
> ++ *
> ++ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
> ++ * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2
> ++ * kernel is being built
> ++ *
> ++ *
> ++ * Note that using these macros directly is poor practice. Instead, you
> ++ * should use them to define human-readable wrapper macros to encode the
> ++ * instructions that you care about. In code which might run on ARMv7 or
> ++ * above, you can usually use the __inst_arm_thumb{16,32} macros to
> ++ * specify the ARM and Thumb alternatives at the same time. This ensures
> ++ * that the correct opcode gets emitted depending on the instruction set
> ++ * used for the kernel build.
> ++ *
> ++ * Look at opcodes-virt.h for an example of how to use these macros.
> ++ */
> ++#include <linux/stringify.h>
> ++
> ++#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
> ++#define __inst_thumb32(x) ___inst_thumb32( \
> ++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \
> ++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \
> ++)
> ++#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
> ++
> ++#ifdef CONFIG_THUMB2_BAREBOX
> ++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
> ++ __inst_thumb16(thumb_opcode)
> ++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
> ++ __inst_thumb32(thumb_opcode)
> ++#else
> ++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
> ++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
> ++#endif
> ++
> ++/* Helpers for the helpers. Don't use these directly. */
> ++#ifdef __ASSEMBLY__
> ++#define ___inst_arm(x) .long x
> ++#define ___inst_thumb16(x) .short x
> ++#define ___inst_thumb32(first, second) .short first, second
> ++#else
> ++#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
> ++#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
> ++#define ___inst_thumb32(first, second) \
> ++ ".short " __stringify(first) ", " __stringify(second) "\n\t"
> ++#endif
> ++
> ++#endif /* __ASM_ARM_OPCODES_H */
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> new file mode 100644
> index 0000000..fcd116a
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> @@ -0,0 +1,88 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:38 +0100
> +Subject: [PATCH] ARM: safely switch from HYP to SVC mode if required
> +
> +This is a port of the Linux safe_svcmode_maskall macro to
> +the Barebox lowlevel init.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/lowlevel.S | 18 +++++++++++++++---
> + arch/arm/include/asm/system.h | 26 ++++++++++++++++++++++++++
> + 2 files changed, 41 insertions(+), 3 deletions(-)
> +
> +diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
> +index 7696a198e764..43665981e48b 100644
> +--- a/arch/arm/cpu/lowlevel.S
> ++++ b/arch/arm/cpu/lowlevel.S
> +@@ -1,16 +1,28 @@
> + #include <linux/linkage.h>
> + #include <init.h>
> + #include <asm/system.h>
> ++#include <asm/opcodes-virt.h>
> +
> + .section ".text_bare_init_","ax"
> + ENTRY(arm_cpu_lowlevel_init)
> + /* save lr, since it may be banked away with a processor mode change */
> + mov r2, lr
> ++
> + /* set the cpu to SVC32 mode, mask irq and fiq */
> + mrs r12, cpsr
> +- bic r12, r12, #0x1f
> +- orr r12, r12, #0xd3
> +- msr cpsr, r12
> ++ eor r12, r12, #HYP_MODE
> ++ tst r12, #MODE_MASK
> ++ bic r12, r12, #MODE_MASK
> ++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
> ++THUMB( orr r12, r12, #PSR_T_BIT )
> ++ bne 1f
> ++ orr r12, r12, #PSR_A_BIT
> ++ adr lr, 2f
> ++ msr spsr_cxsf, r12
> ++ __MSR_ELR_HYP(14)
> ++ __ERET
> ++1: msr cpsr_c, r12
> ++2:
> +
> + #if __LINUX_ARM_ARCH__ >= 6
> + /*
> +diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
> +index 5cf828ea36cb..48242ab473f4 100644
> +--- a/arch/arm/include/asm/system.h
> ++++ b/arch/arm/include/asm/system.h
> +@@ -60,6 +60,32 @@
> + #define CR_AFE (1 << 29) /* Access flag enable */
> + #define CR_TE (1 << 30) /* Thumb exception enable */
> +
> ++/*
> ++ * PSR bits
> ++ */
> ++#define USR_MODE 0x00000010
> ++#define FIQ_MODE 0x00000011
> ++#define IRQ_MODE 0x00000012
> ++#define SVC_MODE 0x00000013
> ++#define ABT_MODE 0x00000017
> ++#define HYP_MODE 0x0000001a
> ++#define UND_MODE 0x0000001b
> ++#define SYSTEM_MODE 0x0000001f
> ++#define MODE32_BIT 0x00000010
> ++#define MODE_MASK 0x0000001f
> ++
> ++#define PSR_T_BIT 0x00000020
> ++#define PSR_F_BIT 0x00000040
> ++#define PSR_I_BIT 0x00000080
> ++#define PSR_A_BIT 0x00000100
> ++#define PSR_E_BIT 0x00000200
> ++#define PSR_J_BIT 0x01000000
> ++#define PSR_Q_BIT 0x08000000
> ++#define PSR_V_BIT 0x10000000
> ++#define PSR_C_BIT 0x20000000
> ++#define PSR_Z_BIT 0x40000000
> ++#define PSR_N_BIT 0x80000000
> ++
> + #ifndef __ASSEMBLY__
> + #if __LINUX_ARM_ARCH__ >= 7
> + static inline unsigned int current_el(void)
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> new file mode 100644
> index 0000000..eed9e52
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> @@ -0,0 +1,37 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:39 +0100
> +Subject: [PATCH] ARM: allow secure monitor code to be built without PSCI
> +
> +The hyp mode handling added in the secure monitor code is also useful
> +when Barebox doesn't have PSCI control. Allow to build without PSCI.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/sm_as.S | 4 ++++
> + 1 file changed, 4 insertions(+)
> +
> +diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> +index 09580e75de5f..0d01e1bf2435 100644
> +--- a/arch/arm/cpu/sm_as.S
> ++++ b/arch/arm/cpu/sm_as.S
> +@@ -129,7 +129,9 @@ secure_monitor:
> + sub sp, sp, #4*4 @ allocate result structure on stack
> + mov r12, sp
> + push {r4-r6, r12}
> ++#ifdef CONFIG_ARM_PSCI
> + bl psci_entry
> ++#endif
> + pop {r4-r6, r12}
> + ldm r12, {r0-r3}
> + add sp, sp, #4*4
> +@@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
> + mcr p15, 0, r0, c1, c0, 1 @ ACTLR
> +
> + bl secure_monitor_stack_setup
> ++#ifdef CONFIG_ARM_PSCI
> + bl psci_cpu_entry_c
> ++#endif
> +
> + ENDPROC(psci_cpu_entry)
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> new file mode 100644
> index 0000000..8047922
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> @@ -0,0 +1,193 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:40 +0100
> +Subject: [PATCH] ARM: add file for HYP mode related setup
> +
> +This adds routines to add hyp mode vectors and switch back to HYP
> +mode from SVC. This is needed in both the PBL and Barebox proper.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/Makefile | 3 +
> + arch/arm/cpu/hyp.S | 116 ++++++++++++++++++++++++++++++++++
> + arch/arm/cpu/sm_as.S | 11 ----
> + arch/arm/include/asm/secure.h | 3 +
> + 4 files changed, 122 insertions(+), 11 deletions(-)
> + create mode 100644 arch/arm/cpu/hyp.S
> +
> +diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
> +index 874d723e2cee..0a403bc981c5 100644
> +--- a/arch/arm/cpu/Makefile
> ++++ b/arch/arm/cpu/Makefile
> +@@ -4,6 +4,9 @@ obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions$(S64).o interrupts$(S64).o
> + obj-$(CONFIG_MMU) += mmu$(S64).o
> + lwl-y += lowlevel$(S64).o
> + obj-pbl-$(CONFIG_MMU) += mmu-early$(S64).o
> ++obj-pbl-$(CONFIG_CPU_32v7) += hyp.o
> ++AFLAGS_hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
> ++AFLAGS_pbl-hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
> +
> + obj-y += start.o entry.o
> +
> +diff --git a/arch/arm/cpu/hyp.S b/arch/arm/cpu/hyp.S
> +new file mode 100644
> +index 000000000000..1314b56eab25
> +--- /dev/null
> ++++ b/arch/arm/cpu/hyp.S
> +@@ -0,0 +1,116 @@
> ++#include <linux/linkage.h>
> ++#include <asm/system.h>
> ++#include <asm/opcodes-virt.h>
> ++#include <init.h>
> ++
> ++.arch_extension sec
> ++.arch_extension virt
> ++
> ++__BARE_INIT
> ++
> ++.data
> ++ .align 2
> ++ENTRY(__boot_cpu_mode)
> ++ .long 0
> ++.text
> ++
> ++ENTRY(__hyp_install)
> ++ mrs r12, cpsr
> ++ and r12, r12, #MODE_MASK
> ++
> ++ @ Save the initial CPU state
> ++ adr r0, .L__boot_cpu_mode_offset
> ++ ldr r1, [r0]
> ++ str r12, [r0, r1]
> ++
> ++ cmp r12, #HYP_MODE
> ++ movne pc, lr @ give up if the CPU is not in HYP mode
> ++
> ++ @ Now install the hypervisor stub:
> ++ adr r12, __hyp_vectors
> ++ mcr p15, 4, r12, c12, c0, 0 @ set hypervisor vector base (HVBAR)
> ++
> ++ @ Disable all traps, so we don't get any nasty surprise
> ++ mov r12, #0
> ++ mcr p15, 4, r12, c1, c1, 0 @ HCR
> ++ mcr p15, 4, r12, c1, c1, 2 @ HCPTR
> ++ mcr p15, 4, r12, c1, c1, 3 @ HSTR
> ++
> ++THUMB( orr r12, #(1 << 30) ) @ HSCTLR.TE
> ++ mcr p15, 4, r12, c1, c0, 0 @ HSCTLR
> ++
> ++ mrc p15, 4, r12, c1, c1, 1 @ HDCR
> ++ and r12, #0x1f @ Preserve HPMN
> ++ mcr p15, 4, r12, c1, c1, 1 @ HDCR
> ++
> ++ @ Make sure NS-SVC is initialised appropriately
> ++ mrc p15, 0, r12, c1, c0, 0 @ SCTLR
> ++ orr r12, #(1 << 5) @ CP15 barriers enabled
> ++ bic r12, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7)
> ++ bic r12, #(3 << 19) @ WXN and UWXN disabled
> ++ mcr p15, 0, r12, c1, c0, 0 @ SCTLR
> ++
> ++ mrc p15, 0, r12, c0, c0, 0 @ MIDR
> ++ mcr p15, 4, r12, c0, c0, 0 @ VPIDR
> ++
> ++ mrc p15, 0, r12, c0, c0, 5 @ MPIDR
> ++ mcr p15, 4, r12, c0, c0, 5 @ VMPIDR
> ++ bx lr
> ++ENDPROC(__hyp_install)
> ++
> ++ENTRY(armv7_hyp_install)
> ++ mov r2, lr
> ++
> ++ bl __hyp_install
> ++
> ++ /* set the cpu to SVC32 mode, mask irq and fiq */
> ++ mrs r12, cpsr
> ++ eor r12, r12, #HYP_MODE
> ++ tst r12, #MODE_MASK
> ++ bic r12, r12, #MODE_MASK
> ++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
> ++THUMB( orr r12, r12, #PSR_T_BIT )
> ++ bne 1f
> ++ orr r12, r12, #PSR_A_BIT
> ++ adr lr, 2f
> ++ msr spsr_cxsf, r12
> ++ __MSR_ELR_HYP(14)
> ++ __ERET
> ++1: msr cpsr_c, r12
> ++2:
> ++ mov pc, r2
> ++ENDPROC(armv7_hyp_install)
> ++
> ++ENTRY(armv7_switch_to_hyp)
> ++ mov r0, lr
> ++ mov r1, sp @ save SVC copy of LR and SP
> ++ isb
> ++ hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
> ++ mov sp, r1
> ++ mov lr, r0 @ restore SVC copy of LR and SP
> ++
> ++ bx lr
> ++ENDPROC(armv7_switch_to_hyp)
> ++
> ++.align 2
> ++.L__boot_cpu_mode_offset:
> ++ .long __boot_cpu_mode - .
> ++
> ++/* The HYP trap is crafted to match armv7_switch_to_hyp() */
> ++__hyp_do_trap:
> ++ mov lr, r0
> ++ mov sp, r1
> ++ bx lr
> ++ENDPROC(__hyp_do_trap)
> ++
> ++.align 5
> ++__hyp_vectors:
> ++__hyp_reset: W(b) .
> ++__hyp_und: W(b) .
> ++__hyp_svc: W(b) .
> ++__hyp_pabort: W(b) .
> ++__hyp_dabort: W(b) .
> ++__hyp_trap: W(b) __hyp_do_trap
> ++__hyp_irq: W(b) .
> ++__hyp_fiq: W(b) .
> ++ENDPROC(__hyp_vectors)
> +diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> +index 0d01e1bf2435..de6cd0406f4f 100644
> +--- a/arch/arm/cpu/sm_as.S
> ++++ b/arch/arm/cpu/sm_as.S
> +@@ -148,17 +148,6 @@ hyp_trap:
> + mov pc, lr @ do no switch modes, but
> + @ return to caller
> +
> +-ENTRY(armv7_switch_to_hyp)
> +- mov r0, lr
> +- mov r1, sp @ save SVC copy of LR and SP
> +- isb
> +- hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
> +- mov sp, r1
> +- mov lr, r0 @ restore SVC copy of LR and SP
> +-
> +- bx lr
> +-ENDPROC(armv7_switch_to_hyp)
> +-
> + ENTRY(psci_cpu_entry)
> + mrc p15, 0, r0, c1, c0, 1 @ ACTLR
> + orr r0, r0, #(1 << 6) @ Set SMP bit
> +diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
> +index a4cb1f6c1c44..663d81ea27dd 100644
> +--- a/arch/arm/include/asm/secure.h
> ++++ b/arch/arm/include/asm/secure.h
> +@@ -5,9 +5,12 @@
> +
> + int armv7_secure_monitor_install(void);
> + int __armv7_secure_monitor_install(void);
> ++
> + void armv7_switch_to_hyp(void);
> ++void armv7_hyp_install(void);
> +
> + extern unsigned char secure_monitor_init_vectors[];
> ++extern int __boot_cpu_mode;
> +
> + enum arm_security_state {
> + ARM_STATE_SECURE,
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> new file mode 100644
> index 0000000..b82de4b
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> @@ -0,0 +1,30 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:41 +0100
> +Subject: [PATCH] ARM: don't try to install secure monitor when entered in HYP
> + mode
> +
> +When Barebox has been entered in HYP mode, the CPU is already switched
> +to the non-secure world and it's not possible for Barebox to install
> +it's own secure monitor.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/sm.c | 3 +++
> + 1 file changed, 3 insertions(+)
> +
> +diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
> +index cb0bac106b5f..1246d8e3a441 100644
> +--- a/arch/arm/cpu/sm.c
> ++++ b/arch/arm/cpu/sm.c
> +@@ -184,6 +184,9 @@ int armv7_secure_monitor_install(void)
> + return -EINVAL;
> + }
> +
> ++ if (__boot_cpu_mode == HYP_MODE)
> ++ return 0;
> ++
> + mmuon = get_cr() & CR_M;
> +
> + vbar = get_vbar();
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> new file mode 100644
> index 0000000..1de95c1
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> @@ -0,0 +1,31 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:42 +0100
> +Subject: [PATCH] ARM: default to starting kernel in HYP mode when entered in
> + HYP
> +
> +When Barebox has been entered in HYP mode, there is a high chance that
> +the kernel is intended to be started in HYP mode also. Get this
> +default into place.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/sm.c | 3 +++
> + 1 file changed, 3 insertions(+)
> +
> +diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
> +index 1246d8e3a441..6fad30adabc9 100644
> +--- a/arch/arm/cpu/sm.c
> ++++ b/arch/arm/cpu/sm.c
> +@@ -262,6 +262,9 @@ static int sm_init(void)
> + bootm_secure_state_names,
> + ARRAY_SIZE(bootm_secure_state_names));
> +
> ++ if (__boot_cpu_mode == HYP_MODE)
> ++ bootm_secure_state = ARM_STATE_HYP;
> ++
> + return 0;
> + }
> + device_initcall(sm_init);
> +\ No newline at end of file
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> new file mode 100644
> index 0000000..10615e9
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> @@ -0,0 +1,105 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:43 +0100
> +Subject: [PATCH] ARM: install HYP vectors at PBL and Barebox entry
> +
> +If the CPU was already in HYP mode when entering the PBL, install a
> +simple trap handler to allow to get back from SVC to HYP before
> +switching to HYP mode.
> +
> +As the vectors are part of the currently running binary, we need to
> +do the same setup when starting the real Barebox binary, as the PBL
> +setup vectors might get overwritten. To do this we trap into HYP mode
> +just before jumping to Barebox and then re-do the vector setup and
> +SVC switch as the first thing in Barebox proper.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/cpu/lowlevel.S | 5 +++++
> + arch/arm/cpu/start-pbl.c | 4 ++++
> + arch/arm/cpu/start.c | 5 +++++
> + arch/arm/cpu/uncompress.c | 4 ++++
> + 4 files changed, 18 insertions(+)
> +
> +diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
> +index 43665981e48b..3b52644e43e1 100644
> +--- a/arch/arm/cpu/lowlevel.S
> ++++ b/arch/arm/cpu/lowlevel.S
> +@@ -8,6 +8,11 @@ ENTRY(arm_cpu_lowlevel_init)
> + /* save lr, since it may be banked away with a processor mode change */
> + mov r2, lr
> +
> ++#ifdef CONFIG_CPU_32v7
> ++ /* careful: the hyp install corrupts r0 and r1 */
> ++ bl __hyp_install
> ++#endif
> ++
> + /* set the cpu to SVC32 mode, mask irq and fiq */
> + mrs r12, cpsr
> + eor r12, r12, #HYP_MODE
> +diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
> +index 16159d7f9d51..48a808645671 100644
> +--- a/arch/arm/cpu/start-pbl.c
> ++++ b/arch/arm/cpu/start-pbl.c
> +@@ -26,6 +26,7 @@
> + #include <asm/barebox-arm-head.h>
> + #include <asm-generic/memory_layout.h>
> + #include <asm/sections.h>
> ++#include <asm/secure.h>
> + #include <asm/cache.h>
> + #include <asm/mmu.h>
> + #include <asm/unaligned.h>
> +@@ -98,5 +99,8 @@ __noreturn void barebox_single_pbl_start(unsigned long membase,
> + else
> + barebox = (void *)barebox_base;
> +
> ++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
> ++ armv7_switch_to_hyp();
> ++
> + barebox(membase, memsize, boarddata);
> + }
> +diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
> +index 64bd942ad764..a79d64eaa6e6 100644
> +--- a/arch/arm/cpu/start.c
> ++++ b/arch/arm/cpu/start.c
> +@@ -24,6 +24,7 @@
> + #include <asm/barebox-arm-head.h>
> + #include <asm-generic/memory_layout.h>
> + #include <asm/sections.h>
> ++#include <asm/secure.h>
> + #include <asm/unaligned.h>
> + #include <asm/cache.h>
> + #include <asm/mmu.h>
> +@@ -147,6 +148,10 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
> + unsigned long barebox_base = arm_mem_barebox_image(membase,
> + endmem,
> + barebox_size);
> ++
> ++ if (IS_ENABLED(CONFIG_CPU_V7))
> ++ armv7_hyp_install();
> ++
> + if (IS_ENABLED(CONFIG_RELOCATABLE))
> + relocate_to_adr(barebox_base);
> +
> +diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
> +index 43b49b42120b..048bca0c9599 100644
> +--- a/arch/arm/cpu/uncompress.c
> ++++ b/arch/arm/cpu/uncompress.c
> +@@ -27,6 +27,7 @@
> + #include <asm/barebox-arm-head.h>
> + #include <asm-generic/memory_layout.h>
> + #include <asm/sections.h>
> ++#include <asm/secure.h>
> + #include <asm/cache.h>
> + #include <asm/mmu.h>
> + #include <asm/unaligned.h>
> +@@ -105,5 +106,8 @@ void __noreturn barebox_multi_pbl_start(unsigned long membase,
> +
> + pr_debug("jumping to uncompressed image at 0x%p\n", barebox);
> +
> ++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
> ++ armv7_switch_to_hyp();
> ++
> + barebox(membase, memsize, boarddata);
> + }
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> new file mode 100644
> index 0000000..9aa90b5
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> @@ -0,0 +1,41 @@
> +From: Enrico Joerns <ejo@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:44 +0100
> +Subject: [PATCH] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
> +
> +Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
> + arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
> + 2 files changed, 6 insertions(+)
> +
> +diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
> +index 6e375bc984de..3baed6525586 100644
> +--- a/arch/arm/boards/raspberry-pi/rpi-common.c
> ++++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> +@@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
> + const struct rpi_model rpi_models_new_scheme[] = {
> + RPI_MODEL(0, "Unknown model", NULL),
> + RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
> ++ RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
> ++ RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
> + };
> +
> + static int rpi_board_rev = 0;
> +diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
> +index 2b5aea88ee0a..0d1ac074e328 100644
> +--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
> ++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
> +@@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
> +
> + /* RPi 2 */
> + #define BCM2836_BOARD_REV_2_B 0x4
> ++/* RPi 3 */
> ++#define BCM2837_BOARD_REV_3_B 0x8
> ++/* Zero */
> ++#define BCM2835_BOARD_REV_ZERO 0x9
> +
> + /*
> + * 0x2..0xf from:
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> new file mode 100644
> index 0000000..8e8d76a
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> @@ -0,0 +1,141 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:45 +0100
> +Subject: [PATCH] ARM: rpi: add raspberry pi 3 support
> +
> +This adds basic support at the same feature level as the other
> +supported raspberry pi boards.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/boards/raspberry-pi/lowlevel.c | 14 ++++++++++++--
> + arch/arm/configs/rpi_defconfig | 2 ++
> + arch/arm/dts/Makefile | 1 +
> + arch/arm/dts/bcm2837-rpi-3.dts | 16 ++++++++++++++++
> + arch/arm/mach-bcm283x/Kconfig | 6 ++++++
> + arch/arm/mach-bcm283x/core.c | 1 +
> + images/Makefile.bcm283x | 4 ++++
> + 7 files changed, 42 insertions(+), 2 deletions(-)
> + create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts
> +
> +diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c
> +index cbc6caa4b9ed..34c9350920e9 100644
> +--- a/arch/arm/boards/raspberry-pi/lowlevel.c
> ++++ b/arch/arm/boards/raspberry-pi/lowlevel.c
> +@@ -1,7 +1,7 @@
> ++#include <asm/barebox-arm.h>
> ++#include <asm/cache.h>
> + #include <common.h>
> + #include <linux/sizes.h>
> +-#include <asm/barebox-arm.h>
> +-#include <asm/barebox-arm-head.h>
> + #include <mach/platform.h>
> +
> + extern char __dtb_bcm2835_rpi_start[];
> +@@ -23,3 +23,13 @@ ENTRY_FUNCTION(start_raspberry_pi2, r0, r1, r2)
> +
> + barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
> + }
> ++
> ++extern char __dtb_bcm2837_rpi_3_start[];
> ++ENTRY_FUNCTION(start_raspberry_pi3, r0, r1, r2)
> ++{
> ++ void *fdt = __dtb_bcm2837_rpi_3_start + get_runtime_offset();
> ++
> ++ arm_cpu_lowlevel_init();
> ++
> ++ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
> ++}
> +diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
> +index f3aef4290425..cd88b4ac751c 100644
> +--- a/arch/arm/configs/rpi_defconfig
> ++++ b/arch/arm/configs/rpi_defconfig
> +@@ -1,9 +1,11 @@
> + CONFIG_ARCH_BCM283X=y
> + CONFIG_MACH_RPI=y
> + CONFIG_MACH_RPI2=y
> ++CONFIG_MACH_RPI3=y
> + CONFIG_AEABI=y
> + CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> + CONFIG_ARM_UNWIND=y
> ++CONFIG_IMAGE_COMPRESSION_NONE=y
> + CONFIG_MMU=y
> + CONFIG_MALLOC_TLSF=y
> + CONFIG_KALLSYMS=y
> +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> +index 1caeca35b484..4e063902c635 100644
> +--- a/arch/arm/dts/Makefile
> ++++ b/arch/arm/dts/Makefile
> +@@ -71,6 +71,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
> + pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
> + pbl-dtb-$(CONFIG_MACH_RPI) += bcm2835-rpi.dtb.o
> + pbl-dtb-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
> ++pbl-dtb-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
> + pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
> + pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
> + pbl-dtb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-sdb.dtb.o
> +diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
> +new file mode 100644
> +index 000000000000..d6ffc369122c
> +--- /dev/null
> ++++ b/arch/arm/dts/bcm2837-rpi-3.dts
> +@@ -0,0 +1,16 @@
> ++#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
> ++
> ++/ {
> ++ chosen {
> ++ stdout-path = &uart0;
> ++ };
> ++
> ++ memory {
> ++ reg = <0x0 0x0>;
> ++ };
> ++};
> ++
> ++&uart0 {
> ++ status = "okay";
> ++ /delete-node/ bluetooth;
> ++};
> +diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
> +index 1457f114ccaa..af2f88c47acb 100644
> +--- a/arch/arm/mach-bcm283x/Kconfig
> ++++ b/arch/arm/mach-bcm283x/Kconfig
> +@@ -19,6 +19,12 @@ config MACH_RPI2
> + select CPU_V7
> + select MACH_RPI_COMMON
> +
> ++config MACH_RPI3
> ++ bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
> ++ select CPU_V7
> ++ select MACH_RPI_COMMON
> ++ select ARM_SECURE_MONITOR
> ++
> + endmenu
> +
> + config MACH_RPI_DEBUG_UART_BASE
> +diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-bcm283x/core.c
> +index fddcb0d1a1d4..26f0996b1cb8 100644
> +--- a/arch/arm/mach-bcm283x/core.c
> ++++ b/arch/arm/mach-bcm283x/core.c
> +@@ -41,6 +41,7 @@ static int bcm2835_clk_init(void)
> + clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
> + clk_register_clkdev(clk, NULL, "uart0-pl0110");
> + clk_register_clkdev(clk, NULL, "20201000.serial");
> ++ clk_register_clkdev(clk, NULL, "3f201000.serial");
> +
> + clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
> + clk_register_clkdev(clk, NULL, "bcm2835-cs");
> +diff --git a/images/Makefile.bcm283x b/images/Makefile.bcm283x
> +index d59ef043f05c..d14e648926ac 100644
> +--- a/images/Makefile.bcm283x
> ++++ b/images/Makefile.bcm283x
> +@@ -9,3 +9,7 @@ image-$(CONFIG_MACH_RPI) += barebox-raspberry-pi-1.img
> + pblx-$(CONFIG_MACH_RPI2) += start_raspberry_pi2
> + FILE_barebox-raspberry-pi-2.img = start_raspberry_pi2.pblx
> + image-$(CONFIG_MACH_RPI2) += barebox-raspberry-pi-2.img
> ++
> ++pblx-$(CONFIG_MACH_RPI3) += start_raspberry_pi3
> ++FILE_barebox-raspberry-pi-3.img = start_raspberry_pi3.pblx
> ++image-$(CONFIG_MACH_RPI3) += barebox-raspberry-pi-3.img
> +\ No newline at end of file
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> new file mode 100644
> index 0000000..da498ba
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> @@ -0,0 +1,25 @@
> +From: Lucas Stach <l.stach@pengutronix.de>
> +Date: Thu, 1 Nov 2018 10:18:46 +0100
> +Subject: [PATCH] ARM: rpi: autosize malloc area
> +
> +Autosize the malloc area according to the available RAM size.
> +
> +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +---
> + arch/arm/configs/rpi_defconfig | 1 +
> + 1 file changed, 1 insertion(+)
> +
> +diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
> +index cd88b4ac751c..2bb615849324 100644
> +--- a/arch/arm/configs/rpi_defconfig
> ++++ b/arch/arm/configs/rpi_defconfig
> +@@ -7,6 +7,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> + CONFIG_ARM_UNWIND=y
> + CONFIG_IMAGE_COMPRESSION_NONE=y
> + CONFIG_MMU=y
> ++CONFIG_MALLOC_SIZE=0x0
> + CONFIG_MALLOC_TLSF=y
> + CONFIG_KALLSYMS=y
> + CONFIG_PROMPT="R-Pi> "
> diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> similarity index 93%
> rename from configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> rename to configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> index 06c356b..9f99a39 100644
> --- a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> @@ -26,10 +26,10 @@ Forwarded: id:20170627190317.19253-1-uwe@kleine-koenig.org
> create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts
>
> diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> -index 30f4c299f1a1..f70fbac8f379 100644
> +index c737cf34138c..9aee9bf0993a 100644
> --- a/arch/arm/boards/Makefile
> +++ b/arch/arm/boards/Makefile
> -@@ -135,6 +135,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
> +@@ -137,6 +137,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
> obj-$(CONFIG_MACH_TX53) += karo-tx53/
> obj-$(CONFIG_MACH_TX6X) += karo-tx6x/
> obj-$(CONFIG_MACH_UDOO) += udoo/
> @@ -254,10 +254,10 @@ index 000000000000..e78c2685fd78
> + imx6sx_barebox_entry(fdt);
> +}
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> -index e60e0ea0c6be..b87e27c8c263 100644
> +index 4e063902c635..3d34a78f7878 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> -@@ -93,6 +93,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
> +@@ -97,6 +97,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
> pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
> pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-bb.dtb.o
> pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
> @@ -276,10 +276,10 @@ index 000000000000..9203d40207c5
> +/{
> +};
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> -index 9052a94ea071..9ec95bb6df09 100644
> +index 63a92bd5bd1d..ab515ecf2286 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> -@@ -377,6 +377,10 @@ config MACH_UDOO
> +@@ -380,6 +380,10 @@ config MACH_UDOO
> bool "Freescale i.MX6 UDOO Board"
> select ARCH_IMX6
>
> @@ -291,22 +291,22 @@ index 9052a94ea071..9ec95bb6df09 100644
> bool "Variscite i.MX6 Quad SOM"
> select ARCH_IMX6
> diff --git a/arch/arm/mach-imx/include/mach/esdctl.h b/arch/arm/mach-imx/include/mach/esdctl.h
> -index 66dcc8974cfb..bd6092febca4 100644
> +index bc6c7339535e..18c4a2836007 100644
> --- a/arch/arm/mach-imx/include/mach/esdctl.h
> +++ b/arch/arm/mach-imx/include/mach/esdctl.h
> -@@ -137,6 +137,7 @@ void __noreturn imx51_barebox_entry(void *boarddata);
> - void __noreturn imx53_barebox_entry(void *boarddata);
> - void __noreturn imx6q_barebox_entry(void *boarddata);
> - void __noreturn imx6ul_barebox_entry(void *boarddata);
> +@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void *boarddata);
> + void __noreturn vf610_barebox_entry(void *boarddata);
> + void __noreturn imx8mq_barebox_entry(void *boarddata);
> + void __noreturn imx7d_barebox_entry(void *boarddata);
> +#define imx6sx_barebox_entry(boarddata) imx6ul_barebox_entry(boarddata)
> void imx_esdctl_disable(void);
> #endif
>
> diff --git a/images/Makefile.imx b/images/Makefile.imx
> -index 90da95d4d025..6420490811f9 100644
> +index 341ce8506d88..c32f78b7e184 100644
> --- a/images/Makefile.imx
> +++ b/images/Makefile.imx
> -@@ -275,6 +275,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
> +@@ -271,6 +271,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
> FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblx.imximg
> image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
>
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> new file mode 100644
> index 0000000..bd444f0
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> @@ -0,0 +1,22 @@
> +From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> +Date: Thu, 22 Nov 2018 12:09:22 +0100
> +Subject: [PATCH] Release pengutronix_multiv7/20181122-1
> +
> +Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> +---
> + Makefile | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/Makefile b/Makefile
> +index 60a5d5ce11f4..b55ca4b03129 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -1,7 +1,7 @@
> + VERSION = 2018
> + PATCHLEVEL = 11
> + SUBLEVEL = 0
> +-EXTRAVERSION =
> ++EXTRAVERSION =-20181122-1
> + NAME = None
> +
> + # *DOCUMENTATION*
> diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/series b/configs/platform-v7a/patches/barebox-2018.11.0/series
> new file mode 100644
> index 0000000..e056b0c
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2018.11.0/series
> @@ -0,0 +1,24 @@
> +# umpf-base: v2018.11.0
> +# umpf-name: pengutronix_multiv7
> +# umpf-version: pengutronix_multiv7/20181122-1
> +# umpf-topic: v2018.11.0/customers/pengutronix/rpi3
> +# umpf-hashinfo: 1bdd9ef32c272ba5501e24ba643107855dd5149c
> +# umpf-topic-range: d1f223eddbcde31ba2a3f34fc0a1a14f40ea7130..1bdd9ef32c272ba5501e24ba643107855dd5149c
> +0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> +0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> +0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> +0004-ARM-add-file-for-HYP-mode-related-setup.patch
> +0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> +0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> +0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> +0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> +0009-ARM-rpi-add-raspberry-pi-3-support.patch
> +0010-ARM-rpi-autosize-malloc-area.patch
> +# umpf-topic: v2018.11.0/customers/pengutronix/udoo-neo
> +# umpf-hashinfo: c5f2e150d7e8d5439458df1a2cab71b25fc36e19
> +# umpf-topic-range: 1bdd9ef32c272ba5501e24ba643107855dd5149c..8cacc208f8f6c9071113b12a618a54d7e80b1694
> +0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> +# umpf-release: pengutronix_multiv7/20181122-1
> +# umpf-topic-range: 8cacc208f8f6c9071113b12a618a54d7e80b1694..45c64f6b4690a6b51be1c487de1ffec6472704e1
> +0201-Release-pengutronix_multiv7-20181122-1.patch
> +# umpf-end
> diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
> index cdea840..e2c8ac1 100644
> --- a/configs/platform-v7a/platformconfig
> +++ b/configs/platform-v7a/platformconfig
> @@ -166,6 +166,8 @@ PTXCONF_BAREBOX_AM335X=y
> PTXCONF_BAREBOX_MX6=y
> PTXCONF_BAREBOX_RPI2=y
> PTXCONF_BAREBOX_RPI2_NEEDS_HOST_LZOP=y
> +PTXCONF_BAREBOX_RPI3=y
> +# PTXCONF_BAREBOX_RPI3_NEEDS_HOST_LZOP is not set
> PTXCONF_BAREBOX_VEXPRESS=y
> PTXCONF_BAREBOX_ARCH_STRING="arm"
> # PTXCONF_BAREBOX is not set
> diff --git a/configs/platform-v7a/rules/barebox-am335x-mlo.make b/configs/platform-v7a/rules/barebox-am335x-mlo.make
> index e71d057..6835d35 100644
> --- a/configs/platform-v7a/rules/barebox-am335x-mlo.make
> +++ b/configs/platform-v7a/rules/barebox-am335x-mlo.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X_MLO) += barebox-am335x-mlo
> #
> # Paths and names
> #
> -BAREBOX_AM335X_MLO_VERSION := 2018.05.0
> -BAREBOX_AM335X_MLO_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_AM335X_MLO_VERSION := 2018.11.0
> +BAREBOX_AM335X_MLO_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_AM335X_MLO := barebox-$(BAREBOX_AM335X_MLO_VERSION)
> BAREBOX_AM335X_MLO_SUFFIX := tar.bz2
> BAREBOX_AM335X_MLO_DIR := $(BUILDDIR)/barebox-am335x-mlo-$(BAREBOX_AM335X_MLO_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-am335x.make b/configs/platform-v7a/rules/barebox-am335x.make
> index 2c35ae1..8b3c2a0 100644
> --- a/configs/platform-v7a/rules/barebox-am335x.make
> +++ b/configs/platform-v7a/rules/barebox-am335x.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X) += barebox-am335x
> #
> # Paths and names
> #
> -BAREBOX_AM335X_VERSION := 2018.05.0
> -BAREBOX_AM335X_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_AM335X_VERSION := 2018.11.0
> +BAREBOX_AM335X_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_AM335X := barebox-$(BAREBOX_AM335X_VERSION)
> BAREBOX_AM335X_SUFFIX := tar.bz2
> BAREBOX_AM335X_DIR := $(BUILDDIR)/barebox-am335x-$(BAREBOX_AM335X_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-mx6.make b/configs/platform-v7a/rules/barebox-mx6.make
> index 7d7c2ce..3b86ea0 100644
> --- a/configs/platform-v7a/rules/barebox-mx6.make
> +++ b/configs/platform-v7a/rules/barebox-mx6.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_MX6) += barebox-mx6
> #
> # Paths and names
> #
> -BAREBOX_MX6_VERSION := 2018.05.0
> -BAREBOX_MX6_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_MX6_VERSION := 2018.11.0
> +BAREBOX_MX6_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_MX6 := barebox-$(BAREBOX_MX6_VERSION)
> BAREBOX_MX6_SUFFIX := tar.bz2
> BAREBOX_MX6_DIR := $(BUILDDIR)/barebox-mx6-$(BAREBOX_MX6_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-rpi2.make b/configs/platform-v7a/rules/barebox-rpi2.make
> index cf9fc00..41990a0 100644
> --- a/configs/platform-v7a/rules/barebox-rpi2.make
> +++ b/configs/platform-v7a/rules/barebox-rpi2.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_RPI2) += barebox-rpi2
> #
> # Paths and names
> #
> -BAREBOX_RPI2_VERSION := 2018.05.0
> -BAREBOX_RPI2_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_RPI2_VERSION := 2018.11.0
> +BAREBOX_RPI2_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_RPI2 := barebox-$(BAREBOX_RPI2_VERSION)
> BAREBOX_RPI2_SUFFIX := tar.bz2
> BAREBOX_RPI2_DIR := $(BUILDDIR)/barebox-rpi2-$(BAREBOX_RPI2_VERSION)
> diff --git a/configs/platform-v7a/rules/barebox-rpi3.make b/configs/platform-v7a/rules/barebox-rpi3.make
> new file mode 100644
> index 0000000..35b7e5b
> --- /dev/null
> +++ b/configs/platform-v7a/rules/barebox-rpi3.make
> @@ -0,0 +1,104 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2016 by Alexander Aring <aar@pengutronix.de>
> +#
> +# See CREDITS for details about who has contributed to this project.
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_BAREBOX_RPI3) += barebox-rpi3
> +
> +#
> +# Paths and names
> +#
> +BAREBOX_RPI3_VERSION := 2018.11.0
> +BAREBOX_RPI3_MD5 := 1472eae302647d1cf7f1c561a6380b43
> +BAREBOX_RPI3 := barebox-$(BAREBOX_RPI3_VERSION)
> +BAREBOX_RPI3_SUFFIX := tar.bz2
> +BAREBOX_RPI3_DIR := $(BUILDDIR)/barebox-rpi3-$(BAREBOX_RPI3_VERSION)
> +BAREBOX_RPI3_CONFIG := $(call ptx/in-platformconfigdir, barebox-rpi3.config)
> +BAREBOX_RPI3_LICENSE := GPL-2.0
> +BAREBOX_RPI3_URL := $(call barebox-url, BAREBOX_RPI3)
> +BAREBOX_RPI3_SOURCE := $(SRCDIR)/$(BAREBOX_RPI3).$(BAREBOX_RPI3_SUFFIX)
> +
> +# ----------------------------------------------------------------------------
> +# Prepare
> +# ----------------------------------------------------------------------------
> +
> +BAREBOX_RPI3_WRAPPER_BLACKLIST := \
> + TARGET_HARDEN_RELRO \
> + TARGET_HARDEN_BINDNOW \
> + TARGET_HARDEN_PIE \
> + TARGET_DEBUG \
> + TARGET_BUILD_ID
> +
> +BAREBOX_RPI3_CONF_ENV := KCONFIG_NOTIMESTAMP=1
> +BAREBOX_RPI3_CONF_OPT := $(call barebox-opts, BAREBOX_RPI3)
> +
> +BAREBOX_RPI3_MAKE_ENV := $(BAREBOX_RPI3_CONF_ENV)
> +BAREBOX_RPI3_MAKE_OPT := $(BAREBOX_RPI3_CONF_OPT)
> +
> +BAREBOX_RPI3_IMAGES := images/barebox-raspberry-pi-3.img
> +BAREBOX_RPI3_IMAGES := $(addprefix $(BAREBOX_RPI3_DIR)/,$(BAREBOX_RPI3_IMAGES))
> +
> +ifdef PTXCONF_BAREBOX_RPI3
> +$(BAREBOX_RPI3_CONFIG):
> + @echo
> + @echo "****************************************************************************"
> + @echo " Please generate a bareboxconfig with 'ptxdist menuconfig barebox-rpi3'"
> + @echo "****************************************************************************"
> + @echo
> + @echo
> + @exit 1
> +endif
> +
> +$(STATEDIR)/barebox-rpi3.prepare: $(BAREBOX_RPI3_CONFIG)
> + @$(call targetinfo)
> + @rm -f "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
> + @ln -s "$(call ptx/in-platformconfigdir, barebox-rpi3-defaultenv)" \
> + "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
> + @$(call world/prepare, BAREBOX_RPI3)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox-rpi3.install:
> + @$(call targetinfo)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Targetinstall
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox-rpi3.targetinstall:
> + @$(call targetinfo)
> + @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
> + install -m 644 \
> + $(image) $(IMAGEDIR)/$(notdir $(image))-rpi3;)
> + @$(call touch)
> +
> +# ----------------------------------------------------------------------------
> +# Clean
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/barebox-rpi3.clean:
> + @$(call targetinfo)
> + @$(call clean_pkg, BAREBOX_RPI3)
> + @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
> + rm -fv $(IMAGEDIR)/$(notdir $(image));)
> +
> +# ----------------------------------------------------------------------------
> +# oldconfig / menuconfig
> +# ----------------------------------------------------------------------------
> +
> +barebox-rpi3_oldconfig barebox-rpi3_menuconfig barebox-rpi3_nconfig: $(STATEDIR)/barebox-rpi3.extract
> + @$(call world/kconfig, BAREBOX_RPI3, $(subst barebox-rpi3_,,$@))
> +
> +# vim: syntax=make
> diff --git a/configs/platform-v7a/rules/barebox-vexpress.make b/configs/platform-v7a/rules/barebox-vexpress.make
> index 0266cbe..f69b6c5 100644
> --- a/configs/platform-v7a/rules/barebox-vexpress.make
> +++ b/configs/platform-v7a/rules/barebox-vexpress.make
> @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_VEXPRESS) += barebox-vexpress
> #
> # Paths and names
> #
> -BAREBOX_VEXPRESS_VERSION := 2018.05.0
> -BAREBOX_VEXPRESS_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> +BAREBOX_VEXPRESS_VERSION := 2018.11.0
> +BAREBOX_VEXPRESS_MD5 := 1472eae302647d1cf7f1c561a6380b43
> BAREBOX_VEXPRESS := barebox-$(BAREBOX_VEXPRESS_VERSION)
> BAREBOX_VEXPRESS_SUFFIX := tar.bz2
> BAREBOX_VEXPRESS_DIR := $(BUILDDIR)/barebox-vexpress-$(BAREBOX_VEXPRESS_VERSION)
> --
> 2.19.1
>
>
> _______________________________________________
> DistroKit mailing list
> DistroKit@pengutronix.de
--
Roland Hieber | r.hieber@pengutronix.de |
Pengutronix e.K. | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim | Phone: +49-5121-206917-5086 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0
2018-12-05 13:15 ` Roland Hieber
@ 2018-12-05 13:20 ` Rouven Czerwinski
0 siblings, 0 replies; 7+ messages in thread
From: Rouven Czerwinski @ 2018-12-05 13:20 UTC (permalink / raw)
To: Roland Hieber, Rouven Czerwinski; +Cc: distrokit
On Wed, 2018-12-05 at 14:15 +0100, Roland Hieber wrote:
> On Wed, Dec 05, 2018 at 08:55:42AM +0100, Rouven Czerwinski wrote:
> > Drop the beaglebone patch, it will be resurrected in a distrokit-
> > deployment
> > layer.
> > We also add the patch series for the rpi3 to barebox, it can be
> > dropped
> > in the next release.
> >
> > Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> > ---
> > .../platform-v7a/barebox-am335x-mlo.config | 22 +-
> > configs/platform-v7a/barebox-am335x.config | 24 +-
> > configs/platform-v7a/barebox-mx6.config | 32 +-
> > configs/platform-v7a/barebox-rpi2.config | 23 +-
> > .../barebox-rpi3-defaultenv/boot/9p | 10 +
> > .../barebox-rpi3-defaultenv/init/bootsource | 13 +
> > .../nv/linux.bootargs.loglevel | 1 +
> > configs/platform-v7a/barebox-rpi3.config | 600
> > ++++++++++++++++++
> > configs/platform-v7a/barebox-vexpress.config | 23 +-
> > ...ne-add-state-entry-for-mmc0-and-mmc1.patch | 35 -
> > ...ease-pengutronix-multi_v7-20180515-1.patch | 22 -
> > .../patches/barebox-2018.05.0/series | 15 -
> > ...ort-opcode-helpers-from-Linux-kernel.patch | 299 +++++++++
> > ...tch-from-HYP-to-SVC-mode-if-required.patch | 88 +++
> > ...-monitor-code-to-be-built-without-PS.patch | 37 ++
> > ...-add-file-for-HYP-mode-related-setup.patch | 193 ++++++
> > ...-install-secure-monitor-when-entered.patch | 30 +
> > ...tarting-kernel-in-HYP-mode-when-ente.patch | 31 +
> > ...HYP-vectors-at-PBL-and-Barebox-entry.patch | 105 +++
> > ...sion-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch | 41 ++
> > ...9-ARM-rpi-add-raspberry-pi-3-support.patch | 141 ++++
> > .../0010-ARM-rpi-autosize-malloc-area.patch | 25 +
> > ...RM-imx-add-support-for-Udoo-Neo-full.patch | 26 +-
> > ...lease-pengutronix_multiv7-20181122-1.patch | 22 +
> > .../patches/barebox-2018.11.0/series | 24 +
> > configs/platform-v7a/platformconfig | 2 +
> > .../rules/barebox-am335x-mlo.make | 4 +-
> > .../platform-v7a/rules/barebox-am335x.make | 4 +-
> > configs/platform-v7a/rules/barebox-mx6.make | 4 +-
> > configs/platform-v7a/rules/barebox-rpi2.make | 4 +-
> > configs/platform-v7a/rules/barebox-rpi3.make | 104 +++
>
> Oh, RPi 3 now has its own barebox? Previously we used barebox-rpi2
> for
> both versions, what is the reason to change that?
Its still included in this old version of the branch and should be
dropped. Nice catch, thanks.
I'll send a V2.
- Rouven
> - Roland
> > .../platform-v7a/rules/barebox-vexpress.make | 4 +-
> > 32 files changed, 1905 insertions(+), 103 deletions(-)
> > create mode 100644 configs/platform-v7a/barebox-rpi3-
> > defaultenv/boot/9p
> > create mode 100644 configs/platform-v7a/barebox-rpi3-
> > defaultenv/init/bootsource
> > create mode 100644 configs/platform-v7a/barebox-rpi3-
> > defaultenv/nv/linux.bootargs.loglevel
> > create mode 100644 configs/platform-v7a/barebox-rpi3.config
> > delete mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> > delete mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
> > delete mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.05.0/series
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-
> > required.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-
> > PS.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-
> > entered.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-
> > ente.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-
> > entry.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-
> > Zer.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
> > rename configs/platform-v7a/patches/{barebox-2018.05.0 => barebox-
> > 2018.11.0}/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch (93%)
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
> > create mode 100644 configs/platform-v7a/patches/barebox-
> > 2018.11.0/series
> > create mode 100644 configs/platform-v7a/rules/barebox-rpi3.make
> >
> > diff --git a/configs/platform-v7a/barebox-am335x-mlo.config
> > b/configs/platform-v7a/barebox-am335x-mlo.config
> > index 6cebecd..90adc2c 100644
> > --- a/configs/platform-v7a/barebox-am335x-mlo.config
> > +++ b/configs/platform-v7a/barebox-am335x-mlo.config
> > @@ -1,6 +1,6 @@
> > #
> > # Automatically generated file; DO NOT EDIT.
> > -# Barebox/arm 2018.05.0-20180515-1 Configuration
> > +# Barebox/arm 2018.11.0-20181122-1 Configuration
> > #
> > CONFIG_ARM=y
> > CONFIG_ARM_USE_COMPRESSED_DTB=y
> > @@ -185,6 +185,7 @@ CONFIG_OF_GPIO=y
> > #
> > # serial drivers
> > #
> > +# CONFIG_SERIAL_DEV_BUS is not set
> > # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> > CONFIG_DRIVER_SERIAL_NS16550=y
> > CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
> > @@ -337,6 +338,15 @@ CONFIG_BUS_OMAP_GPMC=y
> > # Filesystem support
> > #
> > CONFIG_FS=y
> > +CONFIG_FS_LEGACY=y
> > +
> > +#
> > +# Some selected filesystems still use the legacy FS API.
> > +#
> > +
> > +#
> > +# Consider updating them.
> > +#
> > # CONFIG_FS_CRAMFS is not set
> > # CONFIG_FS_EXT4 is not set
> > CONFIG_FS_RAMFS=y
> > @@ -398,3 +408,13 @@ CONFIG_XYMODEM=y
> > CONFIG_CRC16=y
> > # CONFIG_DIGEST is not set
> > # CONFIG_CRYPTO_KEYSTORE is not set
> > +
> > +#
> > +# Firmware files
> > +#
> > +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> > +
> > +#
> > +# Host Tools
> > +#
> > +# CONFIG_COMPILE_HOST_TOOLS is not set
> > diff --git a/configs/platform-v7a/barebox-am335x.config
> > b/configs/platform-v7a/barebox-am335x.config
> > index 0c78012..0c3d7e5 100644
> > --- a/configs/platform-v7a/barebox-am335x.config
> > +++ b/configs/platform-v7a/barebox-am335x.config
> > @@ -1,6 +1,6 @@
> > #
> > # Automatically generated file; DO NOT EDIT.
> > -# Barebox/arm 2018.05.0-20180515-1 Configuration
> > +# Barebox/arm 2018.11.0-20181122-1 Configuration
> > #
> > CONFIG_ARM=y
> > CONFIG_ARM_LINUX=y
> > @@ -408,6 +408,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> > #
> > # serial drivers
> > #
> > +# CONFIG_SERIAL_DEV_BUS is not set
> > # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> > CONFIG_DRIVER_SERIAL_NS16550=y
> > CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
> > @@ -436,6 +437,7 @@ CONFIG_DRIVER_NET_CPSW=y
> > #
> > # CONFIG_AR8327N_PHY is not set
> > # CONFIG_AT803X_PHY is not set
> > +# CONFIG_DAVICOM_PHY is not set
> > # CONFIG_LXT_PHY is not set
> > # CONFIG_MARVELL_PHY is not set
> > # CONFIG_MICREL_PHY is not set
> > @@ -587,6 +589,7 @@ CONFIG_LED_GPIO_OF=y
> > # CONFIG_LED_GPIO_RGB is not set
> > # CONFIG_LED_GPIO_BICOLOR is not set
> > CONFIG_LED_TRIGGERS=y
> > +# CONFIG_LED_PCA955X is not set
> >
> > #
> > # EEPROM support
> > @@ -649,6 +652,15 @@ CONFIG_BUS_OMAP_GPMC=y
> > # Filesystem support
> > #
> > CONFIG_FS=y
> > +CONFIG_FS_LEGACY=y
> > +
> > +#
> > +# Some selected filesystems still use the legacy FS API.
> > +#
> > +
> > +#
> > +# Consider updating them.
> > +#
> > CONFIG_FS_AUTOMOUNT=y
> > # CONFIG_FS_CRAMFS is not set
> > CONFIG_FS_EXT4=y
> > @@ -732,3 +744,13 @@ CONFIG_DIGEST_HMAC_GENERIC=y
> > # CONFIG_DIGEST_SHA256_ARM is not set
> > CONFIG_CRYPTO_RSA=y
> > CONFIG_CRYPTO_KEYSTORE=y
> > +
> > +#
> > +# Firmware files
> > +#
> > +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> > +
> > +#
> > +# Host Tools
> > +#
> > +# CONFIG_COMPILE_HOST_TOOLS is not set
> > diff --git a/configs/platform-v7a/barebox-mx6.config
> > b/configs/platform-v7a/barebox-mx6.config
> > index 980b97b..536cbfe 100644
> > --- a/configs/platform-v7a/barebox-mx6.config
> > +++ b/configs/platform-v7a/barebox-mx6.config
> > @@ -1,6 +1,6 @@
> > #
> > # Automatically generated file; DO NOT EDIT.
> > -# Barebox/arm 2018.05.0-20180515-1 Configuration
> > +# Barebox/arm 2018.11.0-20181122-1 Configuration
> > #
> > CONFIG_ARM=y
> > CONFIG_ARM_LINUX=y
> > @@ -94,13 +94,17 @@ CONFIG_MACH_UDOO_NEO=y
> > # CONFIG_MACH_VARISCITE_MX6 is not set
> > # CONFIG_MACH_GW_VENTANA is not set
> > # CONFIG_MACH_CM_FX6 is not set
> > +# CONFIG_MACH_ADVANTECH_ROM_742X is not set
> > # CONFIG_MACH_WARP7 is not set
> > # CONFIG_MACH_VF610_TWR is not set
> > +# CONFIG_MACH_ZII_RDU1 is not set
> > # CONFIG_MACH_ZII_RDU2 is not set
> > # CONFIG_MACH_ZII_VF610_DEV is not set
> > +# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
> > # CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
> > # CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
> > # CONFIG_MACH_NXP_IMX6ULL_EVK is not set
> > +# CONFIG_MACH_NXP_IMX8MQ_EVK is not set
> >
> > #
> > # Board specific settings
> > @@ -111,10 +115,7 @@ CONFIG_MACH_UDOO_NEO=y
> > #
> > CONFIG_IMX_IIM=y
> > CONFIG_IMX_IIM_FUSE_BLOW=y
> > -CONFIG_IMX_OCOTP=y
> > -# CONFIG_IMX_OCOTP_WRITE is not set
> > # CONFIG_HABV4 is not set
> > -# CONFIG_ARCH_IMX_USBLOADER is not set
> > CONFIG_ARM_ASM_UNIFIED=y
> > CONFIG_AEABI=y
> > CONFIG_THUMB2_BAREBOX=y
> > @@ -464,6 +465,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
> > #
> > # serial drivers
> > #
> > +# CONFIG_SERIAL_DEV_BUS is not set
> > # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> > CONFIG_DRIVER_SERIAL_IMX=y
> > # CONFIG_DRIVER_SERIAL_NS16550 is not set
> > @@ -493,6 +495,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
> > #
> > # CONFIG_AR8327N_PHY is not set
> > CONFIG_AT803X_PHY=y
> > +# CONFIG_DAVICOM_PHY is not set
> > # CONFIG_LXT_PHY is not set
> > # CONFIG_MARVELL_PHY is not set
> > CONFIG_MICREL_PHY=y
> > @@ -681,6 +684,7 @@ CONFIG_LED_GPIO_OF=y
> > # CONFIG_LED_GPIO_RGB is not set
> > # CONFIG_LED_GPIO_BICOLOR is not set
> > CONFIG_LED_TRIGGERS=y
> > +# CONFIG_LED_PCA955X is not set
> >
> > #
> > # EEPROM support
> > @@ -762,6 +766,15 @@ CONFIG_USB_NOP_XCEIV=y
> > # Filesystem support
> > #
> > CONFIG_FS=y
> > +CONFIG_FS_LEGACY=y
> > +
> > +#
> > +# Some selected filesystems still use the legacy FS API.
> > +#
> > +
> > +#
> > +# Consider updating them.
> > +#
> > CONFIG_FS_AUTOMOUNT=y
> > # CONFIG_FS_CRAMFS is not set
> > CONFIG_FS_EXT4=y
> > @@ -854,3 +867,14 @@ CONFIG_DIGEST_HMAC_GENERIC=y
> > # CONFIG_DIGEST_SHA1_ARM is not set
> > # CONFIG_DIGEST_SHA256_ARM is not set
> > CONFIG_CRYPTO_KEYSTORE=y
> > +
> > +#
> > +# Firmware files
> > +#
> > +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> > +
> > +#
> > +# Host Tools
> > +#
> > +# CONFIG_COMPILE_HOST_TOOLS is not set
> > +# CONFIG_ARCH_IMX_USBLOADER is not set
> > diff --git a/configs/platform-v7a/barebox-rpi2.config
> > b/configs/platform-v7a/barebox-rpi2.config
> > index 74c52e9..0e2622f 100644
> > --- a/configs/platform-v7a/barebox-rpi2.config
> > +++ b/configs/platform-v7a/barebox-rpi2.config
> > @@ -1,6 +1,6 @@
> > #
> > # Automatically generated file; DO NOT EDIT.
> > -# Barebox/arm 2018.05.0-20180515-1 Configuration
> > +# Barebox/arm 2018.11.0-20181122-1 Configuration
> > #
> > CONFIG_ARM=y
> > CONFIG_ARM_LINUX=y
> > @@ -54,6 +54,7 @@ CONFIG_MACH_RPI_COMMON=y
> > #
> > # CONFIG_MACH_RPI is not set
> > CONFIG_MACH_RPI2=y
> > +# CONFIG_MACH_RPI3 is not set
> > CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> > CONFIG_AEABI=y
> > # CONFIG_THUMB2_BAREBOX is not set
> > @@ -369,6 +370,7 @@ CONFIG_ARM_AMBA=y
> > #
> > # serial drivers
> > #
> > +# CONFIG_SERIAL_DEV_BUS is not set
> > # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> > CONFIG_SERIAL_AMBA_PL011=y
> > # CONFIG_DRIVER_SERIAL_NS16550 is not set
> > @@ -499,6 +501,15 @@ CONFIG_REGULATOR_BCM283X=y
> > # Filesystem support
> > #
> > CONFIG_FS=y
> > +CONFIG_FS_LEGACY=y
> > +
> > +#
> > +# Some selected filesystems still use the legacy FS API.
> > +#
> > +
> > +#
> > +# Consider updating them.
> > +#
> > CONFIG_FS_AUTOMOUNT=y
> > # CONFIG_FS_CRAMFS is not set
> > CONFIG_FS_EXT4=y
> > @@ -575,3 +586,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
> > # CONFIG_DIGEST_SHA1_ARM is not set
> > # CONFIG_DIGEST_SHA256_ARM is not set
> > # CONFIG_CRYPTO_KEYSTORE is not set
> > +
> > +#
> > +# Firmware files
> > +#
> > +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> > +
> > +#
> > +# Host Tools
> > +#
> > +# CONFIG_COMPILE_HOST_TOOLS is not set
> > diff --git a/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> > b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> > new file mode 100644
> > index 0000000..264ffec
> > --- /dev/null
> > +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/boot/9p
> > @@ -0,0 +1,10 @@
> > +#!/bin/sh
> > +
> > +addpart /dev/nor0 "8M@32M(kernel)"
> > +addpart /dev/nor0 "512k@40M(dtb)"
> > +global.bootm.image="/dev/nor0.kernel"
> > +global.bootm.oftree="/dev/nor0.dtb"
> > +
> > +global linux.bootargs.base="console=ttyAMA0,115200 loglevel=5
> > ptxdist-devel"
> > +
> > +global linux.bootargs.root="root=/dev/root rootfstype=9p
> > rootflags=trans=virtio"
> > \ No newline at end of file
> > diff --git a/configs/platform-v7a/barebox-rpi3-
> > defaultenv/init/bootsource b/configs/platform-v7a/barebox-rpi3-
> > defaultenv/init/bootsource
> > new file mode 100644
> > index 0000000..4de7163
> > --- /dev/null
> > +++ b/configs/platform-v7a/barebox-rpi3-defaultenv/init/bootsource
> > @@ -0,0 +1,13 @@
> > +#!/bin/sh
> > +
> > +if [ -n "$nv.boot.default" ]; then
> > + exit
> > +fi
> > +
> > +if [ $bootsource = mmc ]; then
> > + global.boot.default="bootchooser net"
> > +elif [ $bootsource = net ]; then
> > + global.boot.default="net bootchooser"
> > +else
> > + global.boot.default="disk0.1 net"
> > +fi
> > diff --git a/configs/platform-v7a/barebox-rpi3-
> > defaultenv/nv/linux.bootargs.loglevel b/configs/platform-
> > v7a/barebox-rpi3-defaultenv/nv/linux.bootargs.loglevel
> > new file mode 100644
> > index 0000000..705752c
> > --- /dev/null
> > +++ b/configs/platform-v7a/barebox-rpi3-
> > defaultenv/nv/linux.bootargs.loglevel
> > @@ -0,0 +1 @@
> > +loglevel=5 systemd.log_level=warning systemd.show_status=auto
> > diff --git a/configs/platform-v7a/barebox-rpi3.config
> > b/configs/platform-v7a/barebox-rpi3.config
> > new file mode 100644
> > index 0000000..0336bdf
> > --- /dev/null
> > +++ b/configs/platform-v7a/barebox-rpi3.config
> > @@ -0,0 +1,600 @@
> > +#
> > +# Automatically generated file; DO NOT EDIT.
> > +# Barebox/arm 2018.11.0-20181122-1 Configuration
> > +#
> > +CONFIG_ARM=y
> > +CONFIG_ARM_LINUX=y
> > +CONFIG_TEXT_BASE=0x0
> > +
> > +#
> > +# System Type
> > +#
> > +# CONFIG_ARCH_AT91 is not set
> > +CONFIG_ARCH_BCM283X=y
> > +# CONFIG_ARCH_CLPS711X is not set
> > +# CONFIG_ARCH_DAVINCI is not set
> > +# CONFIG_ARCH_DIGIC is not set
> > +# CONFIG_ARCH_EP93XX is not set
> > +# CONFIG_ARCH_HIGHBANK is not set
> > +# CONFIG_ARCH_IMX is not set
> > +# CONFIG_ARCH_MVEBU is not set
> > +# CONFIG_ARCH_MXS is not set
> > +# CONFIG_ARCH_NETX is not set
> > +# CONFIG_ARCH_NOMADIK is not set
> > +# CONFIG_ARCH_OMAP is not set
> > +# CONFIG_ARCH_PXA is not set
> > +# CONFIG_ARCH_ROCKCHIP is not set
> > +# CONFIG_ARCH_SOCFPGA is not set
> > +# CONFIG_ARCH_S3C24xx is not set
> > +# CONFIG_ARCH_S5PCxx is not set
> > +# CONFIG_ARCH_S3C64xx is not set
> > +# CONFIG_ARCH_VERSATILE is not set
> > +# CONFIG_ARCH_VEXPRESS is not set
> > +# CONFIG_ARCH_TEGRA is not set
> > +# CONFIG_ARCH_UEMD is not set
> > +# CONFIG_ARCH_ZYNQ is not set
> > +# CONFIG_ARCH_QEMU is not set
> > +
> > +#
> > +# Processor Type
> > +#
> > +CONFIG_CPU_32=y
> > +CONFIG_CPU_V7=y
> > +CONFIG_CPU_32v7=y
> > +
> > +#
> > +# processor features
> > +#
> > +# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> > +CONFIG_ARCH_TEXT_BASE=0x0
> > +CONFIG_MACH_RPI_COMMON=y
> > +
> > +#
> > +# select Broadcom BCM283X boards to be built
> > +#
> > +# CONFIG_MACH_RPI is not set
> > +# CONFIG_MACH_RPI2 is not set
> > +CONFIG_MACH_RPI3=y
> > +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> > +CONFIG_AEABI=y
> > +# CONFIG_THUMB2_BAREBOX is not set
> > +# CONFIG_ARM_BOARD_APPEND_ATAG is not set
> > +
> > +#
> > +# ARM specific settings
> > +#
> > +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> > +CONFIG_ARM_EXCEPTIONS=y
> > +CONFIG_ARM_UNWIND=y
> > +# CONFIG_ARM_SEMIHOSTING is not set
> > +CONFIG_ARM_SMCCC=y
> > +CONFIG_ARM_SECURE_MONITOR=y
> > +# CONFIG_ARM_PSCI is not set
> > +CONFIG_DEFCONFIG_LIST="$ARCH_DEFCONFIG"
> > +CONFIG_GREGORIAN_CALENDER=y
> > +CONFIG_HAS_KALLSYMS=y
> > +CONFIG_HAS_MODULES=y
> > +CONFIG_HAS_CACHE=y
> > +CONFIG_HAS_DMA=y
> > +CONFIG_GENERIC_GPIO=y
> > +CONFIG_BLOCK=y
> > +CONFIG_BLOCK_WRITE=y
> > +CONFIG_FILETYPE=y
> > +CONFIG_BINFMT=y
> > +CONFIG_UIMAGE=y
> > +CONFIG_STDDEV=y
> > +CONFIG_BOOT=y
> > +
> > +#
> > +# General Settings
> > +#
> > +CONFIG_LOCALVERSION=""
> > +CONFIG_LOCALVERSION_AUTO=y
> > +CONFIG_BANNER=y
> > +CONFIG_MEMINFO=y
> > +CONFIG_ENVIRONMENT_VARIABLES=y
> > +CONFIG_GLOBALVAR=y
> > +CONFIG_NVVAR=y
> > +
> > +#
> > +# memory layout
> > +#
> > +CONFIG_HAVE_PBL_IMAGE=y
> > +CONFIG_HAVE_PBL_MULTI_IMAGES=y
> > +CONFIG_HAVE_IMAGE_COMPRESSION=y
> > +CONFIG_PBL_IMAGE=y
> > +CONFIG_PBL_MULTI_IMAGES=y
> > +CONFIG_PBL_RELOCATABLE=y
> > +CONFIG_IMAGE_COMPRESSION=y
> > +# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
> > +# CONFIG_IMAGE_COMPRESSION_LZO is not set
> > +# CONFIG_IMAGE_COMPRESSION_GZIP is not set
> > +# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
> > +CONFIG_IMAGE_COMPRESSION_NONE=y
> > +CONFIG_MMU=y
> > +CONFIG_MMU_EARLY=y
> > +CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> > +CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> > +CONFIG_BAREBOX_MAX_PBLX_SIZE=0xffffffff
> > +CONFIG_STACK_SIZE=0x8000
> > +CONFIG_MALLOC_SIZE=0x0
> > +# CONFIG_EXPERIMENTAL is not set
> > +# CONFIG_MALLOC_DLMALLOC is not set
> > +CONFIG_MALLOC_TLSF=y
> > +CONFIG_KALLSYMS=y
> > +CONFIG_RELOCATABLE=y
> > +# CONFIG_PANIC_HANG is not set
> > +CONFIG_PROMPT="R-Pi> "
> > +CONFIG_BAUDRATE=115200
> > +CONFIG_CBSIZE=1024
> > +CONFIG_SHELL_HUSH=y
> > +# CONFIG_SHELL_SIMPLE is not set
> > +# CONFIG_SHELL_NONE is not set
> > +CONFIG_GLOB=y
> > +CONFIG_GLOB_SORT=y
> > +CONFIG_PROMPT_HUSH_PS2="> "
> > +CONFIG_HUSH_FANCY_PROMPT=y
> > +CONFIG_CMDLINE_EDITING=y
> > +CONFIG_AUTO_COMPLETE=y
> > +CONFIG_MENU=y
> > +CONFIG_PASSWORD=y
> > +CONFIG_PASSWORD_DEFAULT=""
> > +CONFIG_PASSWD_SUM_MD5=y
> > +# CONFIG_PASSWD_SUM_SHA1 is not set
> > +# CONFIG_PASSWD_SUM_SHA256 is not set
> > +# CONFIG_PASSWD_SUM_SHA512 is not set
> > +# CONFIG_PASSWD_CRYPTO_PBKDF2 is not set
> > +CONFIG_DYNAMIC_CRC_TABLE=y
> > +CONFIG_ERRNO_MESSAGES=y
> > +CONFIG_TIMESTAMP=y
> > +CONFIG_BOOTM=y
> > +CONFIG_BOOTM_SHOW_TYPE=y
> > +CONFIG_BOOTM_VERBOSE=y
> > +CONFIG_BOOTM_INITRD=y
> > +CONFIG_BOOTM_OFTREE=y
> > +# CONFIG_BOOTM_OFTREE_UIMAGE is not set
> > +# CONFIG_BOOTM_AIMAGE is not set
> > +# CONFIG_BOOTM_FITIMAGE is not set
> > +CONFIG_BLSPEC=y
> > +CONFIG_FLEXIBLE_BOOTARGS=y
> > +# CONFIG_IMD is not set
> > +# CONFIG_KERNEL_INSTALL_TARGET is not set
> > +CONFIG_CONSOLE_FULL=y
> > +# CONFIG_CONSOLE_SIMPLE is not set
> > +# CONFIG_CONSOLE_NONE is not set
> > +CONFIG_CONSOLE_ACTIVATE_FIRST=y
> > +# CONFIG_CONSOLE_ACTIVATE_ALL is not set
> > +# CONFIG_CONSOLE_ACTIVATE_NONE is not set
> > +# CONFIG_CONSOLE_ALLOW_COLOR is not set
> > +# CONFIG_PBL_CONSOLE is not set
> > +# CONFIG_CONSOLE_RATP is not set
> > +CONFIG_PARTITION=y
> > +CONFIG_PARTITION_DISK=y
> > +CONFIG_PARTITION_DISK_DOS=y
> > +# CONFIG_PARTITION_DISK_EFI is not set
> > +CONFIG_ENV_HANDLING=y
> > +CONFIG_DEFAULT_ENVIRONMENT=y
> > +CONFIG_DEFAULT_COMPRESSION_NONE=y
> > +CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> > +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
> > +# CONFIG_BAREBOXENV_TARGET is not set
> > +# CONFIG_BAREBOXCRC32_TARGET is not set
> > +CONFIG_POLLER=y
> > +# CONFIG_STATE is not set
> > +# CONFIG_BOOTCHOOSER is not set
> > +# CONFIG_RESET_SOURCE is not set
> > +
> > +#
> > +# Debugging
> > +#
> > +CONFIG_COMPILE_LOGLEVEL=6
> > +CONFIG_DEFAULT_LOGLEVEL=7
> > +# CONFIG_DEBUG_INFO is not set
> > +# CONFIG_DEBUG_LL is not set
> > +# CONFIG_DEBUG_INITCALLS is not set
> > +CONFIG_HAS_DEBUG_LL=y
> > +CONFIG_COMMAND_SUPPORT=y
> > +CONFIG_COMPILE_HASH=y
> > +CONFIG_COMPILE_MEMORY=y
> > +
> > +#
> > +# Commands
> > +#
> > +
> > +#
> > +# Information
> > +#
> > +CONFIG_CMD_ARM_CPUINFO=y
> > +CONFIG_CMD_DEVINFO=y
> > +# CONFIG_CMD_DMESG is not set
> > +CONFIG_CMD_DRVINFO=y
> > +CONFIG_CMD_HELP=y
> > +CONFIG_LONGHELP=y
> > +CONFIG_CMD_IOMEM=y
> > +# CONFIG_CMD_IMD is not set
> > +CONFIG_CMD_MEMINFO=y
> > +# CONFIG_CMD_ARM_MMUINFO is not set
> > +# CONFIG_CMD_REGULATOR is not set
> > +CONFIG_CMD_VERSION=y
> > +# CONFIG_CMD_MMC_EXTCSD is not set
> > +
> > +#
> > +# Boot
> > +#
> > +CONFIG_CMD_BOOT=y
> > +CONFIG_CMD_BOOTM=y
> > +CONFIG_CMD_BOOTU=y
> > +# CONFIG_CMD_BOOTZ is not set
> > +CONFIG_CMD_GO=y
> > +CONFIG_CMD_LOADB=y
> > +# CONFIG_CMD_LOADS is not set
> > +CONFIG_CMD_LOADY=y
> > +CONFIG_CMD_RESET=y
> > +CONFIG_CMD_UIMAGE=y
> > +
> > +#
> > +# Partition
> > +#
> > +CONFIG_CMD_PARTITION=y
> > +CONFIG_CMD_AUTOMOUNT=y
> > +CONFIG_CMD_MOUNT=y
> > +CONFIG_CMD_UMOUNT=y
> > +
> > +#
> > +# Environment
> > +#
> > +CONFIG_CMD_NV=y
> > +CONFIG_CMD_EXPORT=y
> > +# CONFIG_CMD_DEFAULTENV is not set
> > +CONFIG_CMD_GLOBAL=y
> > +# CONFIG_CMD_LOADENV is not set
> > +CONFIG_CMD_PRINTENV=y
> > +CONFIG_CMD_MAGICVAR=y
> > +CONFIG_CMD_MAGICVAR_HELP=y
> > +CONFIG_CMD_SAVEENV=y
> > +
> > +#
> > +# File
> > +#
> > +CONFIG_CMD_BASENAME=y
> > +CONFIG_CMD_CAT=y
> > +CONFIG_CMD_CD=y
> > +CONFIG_CMD_CP=y
> > +# CONFIG_CMD_CMP is not set
> > +CONFIG_CMD_DIGEST=y
> > +CONFIG_CMD_DIRNAME=y
> > +CONFIG_CMD_FILETYPE=y
> > +CONFIG_CMD_LN=y
> > +CONFIG_CMD_LS=y
> > +CONFIG_CMD_MD5SUM=y
> > +CONFIG_CMD_MKDIR=y
> > +CONFIG_CMD_PWD=y
> > +CONFIG_CMD_READLINK=y
> > +CONFIG_CMD_RM=y
> > +CONFIG_CMD_RMDIR=y
> > +# CONFIG_CMD_SHA1SUM is not set
> > +# CONFIG_CMD_SHA224SUM is not set
> > +# CONFIG_CMD_SHA256SUM is not set
> > +# CONFIG_CMD_SHA384SUM is not set
> > +# CONFIG_CMD_SHA512SUM is not set
> > +CONFIG_CMD_UNCOMPRESS=y
> > +
> > +#
> > +# Shell scripting
> > +#
> > +CONFIG_CMD_FALSE=y
> > +CONFIG_CMD_GETOPT=y
> > +CONFIG_CMD_LET=y
> > +CONFIG_CMD_MSLEEP=y
> > +# CONFIG_CMD_READF is not set
> > +CONFIG_CMD_SLEEP=y
> > +CONFIG_CMD_TEST=y
> > +CONFIG_CMD_TRUE=y
> > +
> > +#
> > +# Console and Framebuffer interaction
> > +#
> > +CONFIG_CMD_CLEAR=y
> > +CONFIG_CMD_ECHO=y
> > +CONFIG_CMD_ECHO_E=y
> > +CONFIG_CMD_EDIT=y
> > +CONFIG_CMD_LOGIN=y
> > +CONFIG_CMD_MENU=y
> > +CONFIG_CMD_MENU_MANAGEMENT=y
> > +# CONFIG_CMD_MENUTREE is not set
> > +CONFIG_CMD_PASSWD=y
> > +CONFIG_PASSWD_MODE_HIDE=y
> > +# CONFIG_PASSWD_MODE_STAR is not set
> > +# CONFIG_PASSWD_MODE_CLEAR is not set
> > +CONFIG_CMD_READLINE=y
> > +CONFIG_CMD_TIMEOUT=y
> > +
> > +#
> > +# Memory
> > +#
> > +CONFIG_CMD_CRC=y
> > +CONFIG_CMD_CRC_CMP=y
> > +CONFIG_CMD_MD=y
> > +CONFIG_CMD_MEMCMP=y
> > +CONFIG_CMD_MEMCPY=y
> > +CONFIG_CMD_MEMSET=y
> > +# CONFIG_CMD_MEMTEST is not set
> > +CONFIG_CMD_MM=y
> > +CONFIG_CMD_MW=y
> > +
> > +#
> > +# Hardware manipulation
> > +#
> > +CONFIG_CMD_CLK=y
> > +CONFIG_CMD_DETECT=y
> > +# CONFIG_CMD_FLASH is not set
> > +CONFIG_CMD_GPIO=y
> > +# CONFIG_CMD_LED is not set
> > +# CONFIG_CMD_POWEROFF is not set
> > +# CONFIG_CMD_SPI is not set
> > +# CONFIG_CMD_LED_TRIGGER is not set
> > +CONFIG_CMD_WD=y
> > +CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> > +
> > +#
> > +# Miscellaneous
> > +#
> > +# CONFIG_CMD_2048 is not set
> > +# CONFIG_CMD_BAREBOX_UPDATE is not set
> > +# CONFIG_CMD_FIRMWARELOAD is not set
> > +CONFIG_CMD_OF_DUMP=y
> > +CONFIG_CMD_OF_NODE=y
> > +CONFIG_CMD_OF_PROPERTY=y
> > +# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
> > +# CONFIG_CMD_OF_FIXUP_STATUS is not set
> > +CONFIG_CMD_OFTREE=y
> > +CONFIG_CMD_TIME=y
> > +# CONFIG_CMD_DHRYSTONE is not set
> > +# CONFIG_CMD_SPD_DECODE is not set
> > +# CONFIG_CMD_SEED is not set
> > +# CONFIG_NET is not set
> > +
> > +#
> > +# Drivers
> > +#
> > +CONFIG_OFTREE=y
> > +CONFIG_OFTREE_MEM_GENERIC=y
> > +CONFIG_DTC=y
> > +CONFIG_OFDEVICE=y
> > +CONFIG_OF_GPIO=y
> > +# CONFIG_OF_BAREBOX_DRIVERS is not set
> > +# CONFIG_AIODEV is not set
> > +CONFIG_ARM_AMBA=y
> > +
> > +#
> > +# serial drivers
> > +#
> > +# CONFIG_SERIAL_DEV_BUS is not set
> > +# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> > +CONFIG_SERIAL_AMBA_PL011=y
> > +# CONFIG_DRIVER_SERIAL_NS16550 is not set
> > +# CONFIG_DRIVER_SERIAL_CADENCE is not set
> > +
> > +#
> > +# SPI drivers
> > +#
> > +CONFIG_SPI=y
> > +# CONFIG_DRIVER_SPI_GPIO is not set
> > +# CONFIG_I2C is not set
> > +# CONFIG_MTD is not set
> > +CONFIG_DISK=y
> > +CONFIG_DISK_WRITE=y
> > +
> > +#
> > +# drive types
> > +#
> > +# CONFIG_DISK_ATA is not set
> > +# CONFIG_DISK_AHCI is not set
> > +
> > +#
> > +# interface types
> > +#
> > +# CONFIG_DISK_INTF_PLATFORM_IDE is not set
> > +# CONFIG_USB_HOST is not set
> > +# CONFIG_USB_GADGET is not set
> > +# CONFIG_USB_MUSB is not set
> > +# CONFIG_VIDEO is not set
> > +CONFIG_MCI=y
> > +
> > +#
> > +# --- Feature list ---
> > +#
> > +# CONFIG_MCI_STARTUP is not set
> > +CONFIG_MCI_INFO=y
> > +CONFIG_MCI_WRITE=y
> > +# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> > +
> > +#
> > +# --- MCI host drivers ---
> > +#
> > +# CONFIG_MCI_DW is not set
> > +CONFIG_MCI_BCM283X=y
> > +# CONFIG_MCI_MMCI is not set
> > +# CONFIG_MCI_SPI is not set
> > +CONFIG_HAVE_CLK=y
> > +CONFIG_CLKDEV_LOOKUP=y
> > +CONFIG_COMMON_CLK=y
> > +CONFIG_CLOCKSOURCE_BCM283X=y
> > +CONFIG_CLOCKSOURCE_DUMMY_RATE=1000
> > +
> > +#
> > +# MFD
> > +#
> > +# CONFIG_MFD_MC13XXX is not set
> > +# CONFIG_MFD_SYSCON is not set
> > +
> > +#
> > +# Misc devices
> > +#
> > +# CONFIG_JTAG is not set
> > +# CONFIG_SRAM is not set
> > +CONFIG_LED=y
> > +CONFIG_LED_GPIO=y
> > +# CONFIG_LED_GPIO_OF is not set
> > +# CONFIG_LED_GPIO_RGB is not set
> > +# CONFIG_LED_GPIO_BICOLOR is not set
> > +CONFIG_LED_TRIGGERS=y
> > +
> > +#
> > +# EEPROM support
> > +#
> > +# CONFIG_EEPROM_AT25 is not set
> > +
> > +#
> > +# Input device support
> > +#
> > +# CONFIG_KEYBOARD_GPIO is not set
> > +CONFIG_WATCHDOG=y
> > +# CONFIG_WATCHDOG_POLLER is not set
> > +# CONFIG_WATCHDOG_DW is not set
> > +CONFIG_WATCHDOG_BCM2835=y
> > +# CONFIG_PWM is not set
> > +# CONFIG_HWRNG is not set
> > +
> > +#
> > +# DMA support
> > +#
> > +CONFIG_GPIOLIB=y
> > +
> > +#
> > +# GPIO
> > +#
> > +# CONFIG_GPIO_74164 is not set
> > +CONFIG_GPIO_BCM283X=y
> > +# CONFIG_GPIO_GENERIC_PLATFORM is not set
> > +# CONFIG_GPIO_IMX is not set
> > +# CONFIG_GPIO_VF610 is not set
> > +# CONFIG_GPIO_MXS is not set
> > +# CONFIG_GPIO_OMAP is not set
> > +# CONFIG_GPIO_PL061 is not set
> > +# CONFIG_GPIO_DESIGNWARE is not set
> > +# CONFIG_W1 is not set
> > +# CONFIG_PINCTRL is not set
> > +# CONFIG_NVMEM is not set
> > +
> > +#
> > +# Bus devices
> > +#
> > +CONFIG_REGULATOR=y
> > +# CONFIG_REGULATOR_FIXED is not set
> > +CONFIG_REGULATOR_BCM283X=y
> > +# CONFIG_RESET_CONTROLLER is not set
> > +# CONFIG_RTC_CLASS is not set
> > +
> > +#
> > +# Firmware Drivers
> > +#
> > +# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> > +# CONFIG_GENERIC_PHY is not set
> > +# CONFIG_CRYPTO_HW is not set
> > +
> > +#
> > +# Memory controller drivers
> > +#
> > +
> > +#
> > +# Filesystem support
> > +#
> > +CONFIG_FS=y
> > +CONFIG_FS_LEGACY=y
> > +
> > +#
> > +# Some selected filesystems still use the legacy FS API.
> > +#
> > +
> > +#
> > +# Consider updating them.
> > +#
> > +CONFIG_FS_AUTOMOUNT=y
> > +# CONFIG_FS_CRAMFS is not set
> > +CONFIG_FS_EXT4=y
> > +CONFIG_FS_RAMFS=y
> > +CONFIG_FS_DEVFS=y
> > +CONFIG_FS_FAT=y
> > +CONFIG_FS_FAT_WRITE=y
> > +CONFIG_FS_FAT_LFN=y
> > +# CONFIG_FS_BPKFS is not set
> > +# CONFIG_FS_UIMAGEFS is not set
> > +# CONFIG_FS_PSTORE is not set
> > +# CONFIG_FS_SQUASHFS is not set
> > +
> > +#
> > +# ZLIB support disabled
> > +#
> > +
> > +#
> > +# LZ4 support disabled
> > +#
> > +
> > +#
> > +# LZO support disabled
> > +#
> > +
> > +#
> > +# XZ support disabled
> > +#
> > +
> > +#
> > +# ZSTD support disabled
> > +#
> > +
> > +#
> > +# Library routines
> > +#
> > +CONFIG_PARAMETER=y
> > +CONFIG_UNCOMPRESS=y
> > +# CONFIG_ZLIB is not set
> > +# CONFIG_BZLIB is not set
> > +# CONFIG_LZ4_DECOMPRESS is not set
> > +# CONFIG_ZSTD_DECOMPRESS is not set
> > +# CONFIG_XZ_DECOMPRESS is not set
> > +# CONFIG_GENERIC_FIND_NEXT_BIT is not set
> > +CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> > +# CONFIG_LZO_DECOMPRESS is not set
> > +CONFIG_FNMATCH=y
> > +CONFIG_QSORT=y
> > +CONFIG_XYMODEM=y
> > +# CONFIG_RATP is not set
> > +# CONFIG_ALLOW_PRNG_FALLBACK is not set
> > +# CONFIG_CRC_CCITT is not set
> > +
> > +#
> > +# Library gui routines
> > +#
> > +# CONFIG_BAREBOX_LOGO is not set
> > +
> > +#
> > +# Crypto support
> > +#
> > +CONFIG_CRC32=y
> > +CONFIG_CRC16=y
> > +CONFIG_DIGEST=y
> > +CONFIG_MD5=y
> > +CONFIG_SHA1=y
> > +CONFIG_SHA256=y
> > +# CONFIG_DIGEST_CRC32_GENERIC is not set
> > +CONFIG_DIGEST_MD5_GENERIC=y
> > +CONFIG_DIGEST_SHA1_GENERIC=y
> > +# CONFIG_DIGEST_SHA224_GENERIC is not set
> > +CONFIG_DIGEST_SHA256_GENERIC=y
> > +# CONFIG_DIGEST_SHA384_GENERIC is not set
> > +# CONFIG_DIGEST_SHA512_GENERIC is not set
> > +# CONFIG_DIGEST_HMAC_GENERIC is not set
> > +# CONFIG_DIGEST_SHA1_ARM is not set
> > +# CONFIG_DIGEST_SHA256_ARM is not set
> > +# CONFIG_CRYPTO_KEYSTORE is not set
> > +
> > +#
> > +# Firmware files
> > +#
> > +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> > +
> > +#
> > +# Host Tools
> > +#
> > +# CONFIG_COMPILE_HOST_TOOLS is not set
> > diff --git a/configs/platform-v7a/barebox-vexpress.config
> > b/configs/platform-v7a/barebox-vexpress.config
> > index 826d222..72d5421 100644
> > --- a/configs/platform-v7a/barebox-vexpress.config
> > +++ b/configs/platform-v7a/barebox-vexpress.config
> > @@ -1,6 +1,6 @@
> > #
> > # Automatically generated file; DO NOT EDIT.
> > -# Barebox/arm 2018.05.0-20180515-1 Configuration
> > +# Barebox/arm 2018.11.0-20181122-1 Configuration
> > #
> > CONFIG_ARM=y
> > CONFIG_ARM_LINUX=y
> > @@ -364,6 +364,7 @@ CONFIG_ARM_AMBA=y
> > #
> > # serial drivers
> > #
> > +# CONFIG_SERIAL_DEV_BUS is not set
> > # CONFIG_DRIVER_SERIAL_ARM_DCC is not set
> > CONFIG_SERIAL_AMBA_PL011=y
> > # CONFIG_DRIVER_SERIAL_NS16550 is not set
> > @@ -389,6 +390,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> > #
> > # CONFIG_AR8327N_PHY is not set
> > # CONFIG_AT803X_PHY is not set
> > +# CONFIG_DAVICOM_PHY is not set
> > # CONFIG_LXT_PHY is not set
> > # CONFIG_MARVELL_PHY is not set
> > # CONFIG_MICREL_PHY is not set
> > @@ -522,6 +524,15 @@ CONFIG_STATE_DRV=y
> > # Filesystem support
> > #
> > CONFIG_FS=y
> > +CONFIG_FS_LEGACY=y
> > +
> > +#
> > +# Some selected filesystems still use the legacy FS API.
> > +#
> > +
> > +#
> > +# Consider updating them.
> > +#
> > CONFIG_FS_AUTOMOUNT=y
> > # CONFIG_FS_CRAMFS is not set
> > CONFIG_FS_EXT4=y
> > @@ -599,3 +610,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
> > # CONFIG_DIGEST_SHA1_ARM is not set
> > # CONFIG_DIGEST_SHA256_ARM is not set
> > # CONFIG_CRYPTO_KEYSTORE is not set
> > +
> > +#
> > +# Firmware files
> > +#
> > +CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> > +
> > +#
> > +# Host Tools
> > +#
> > +# CONFIG_COMPILE_HOST_TOOLS is not set
> > diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0001-
> > beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> > b/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-
> > add-state-entry-for-mmc0-and-mmc1.patch
> > deleted file mode 100644
> > index cfca106..0000000
> > --- a/configs/platform-v7a/patches/barebox-2018.05.0/0001-
> > beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> > +++ /dev/null
> > @@ -1,35 +0,0 @@
> > -From: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > -Date: Fri, 10 Jun 2016 14:02:30 +0200
> > -Subject: [PATCH] beaglebone: add state entry for mmc0 and mmc1
> > -
> > -Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
> > ----
> > - arch/arm/dts/am335x-bone-common.dtsi | 15 +++++++++++++++
> > - 1 file changed, 15 insertions(+)
> > -
> > -diff --git a/arch/arm/dts/am335x-bone-common.dtsi
> > b/arch/arm/dts/am335x-bone-common.dtsi
> > -index 0413724e0ca1..6e58714516fd 100644
> > ---- a/arch/arm/dts/am335x-bone-common.dtsi
> > -+++ b/arch/arm/dts/am335x-bone-common.dtsi
> > -@@ -11,6 +11,21 @@
> > - linux,stdout-path = &uart0;
> > - };
> > -
> > -+ bootstate: bootstate {
> > -+ compatible = "barebox,bootstate";
> > -+ backend-type = "nv";
> > -+
> > -+ system0 {
> > -+ default_attempts = <3>;
> > -+ boot = "mmc0";
> > -+ };
> > -+
> > -+ system1 {
> > -+ default_attempts = <3>;
> > -+ boot = "mmc1";
> > -+ };
> > -+ };
> > -+
> > - cpus {
> > - cpu@0 {
> > - cpu0-supply = <&dcdc2_reg>;
> > diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0201-
> > Release-pengutronix-multi_v7-20180515-1.patch b/configs/platform-
> > v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-
> > 20180515-1.patch
> > deleted file mode 100644
> > index 4b0c22d..0000000
> > --- a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-
> > pengutronix-multi_v7-20180515-1.patch
> > +++ /dev/null
> > @@ -1,22 +0,0 @@
> > -From: Roland Hieber <r.hieber@pengutronix.de>
> > -Date: Tue, 15 May 2018 23:44:48 +0200
> > -Subject: [PATCH] Release pengutronix/multi_v7/20180515-1
> > -
> > -Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
> > ----
> > - Makefile | 2 +-
> > - 1 file changed, 1 insertion(+), 1 deletion(-)
> > -
> > -diff --git a/Makefile b/Makefile
> > -index 88c19917394f..11e79cc339f4 100644
> > ---- a/Makefile
> > -+++ b/Makefile
> > -@@ -1,7 +1,7 @@
> > - VERSION = 2018
> > - PATCHLEVEL = 05
> > - SUBLEVEL = 0
> > --EXTRAVERSION =
> > -+EXTRAVERSION =-20180515-1
> > - NAME = None
> > -
> > - # *DOCUMENTATION*
> > diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/series
> > b/configs/platform-v7a/patches/barebox-2018.05.0/series
> > deleted file mode 100644
> > index 272791c..0000000
> > --- a/configs/platform-v7a/patches/barebox-2018.05.0/series
> > +++ /dev/null
> > @@ -1,15 +0,0 @@
> > -# umpf-base: v2018.05.0
> > -# umpf-name: pengutronix/multi_v7
> > -# umpf-version: pengutronix/multi_v7/20180515-1
> > -# umpf-topic: v2018.05.0/customers/pengutronix/beaglebone
> > -# umpf-hashinfo: d1f50bff60c7069caad2df4ef02f672be456f141
> > -# umpf-topic-range:
> > cd4320e3e86bd2ab7b4a19016ef8df6c5d69a5a5..d1f50bff60c7069caad2df4ef
> > 02f672be456f141
> > -0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
> > -# umpf-topic: v2018.05.0/customers/pengutronix/udoo-neo
> > -# umpf-hashinfo: 772e5039c9a147256a085c76a74cf5cb5c14ec35
> > -# umpf-topic-range:
> > d1f50bff60c7069caad2df4ef02f672be456f141..183d8e8d0ccf827481923b387
> > 2144e2c10ef9fac
> > -0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> > -# umpf-release: pengutronix/multi_v7/20180515-1
> > -# umpf-topic-range:
> > 183d8e8d0ccf827481923b3872144e2c10ef9fac..734e18abc455f563837dd6ad0
> > df6fb9378053b00
> > -0201-Release-pengutronix-multi_v7-20180515-1.patch
> > -# umpf-end
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0001-
> > ARM-import-opcode-helpers-from-Linux-kernel.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-
> > opcode-helpers-from-Linux-kernel.patch
> > new file mode 100644
> > index 0000000..bd459d0
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-
> > import-opcode-helpers-from-Linux-kernel.patch
> > @@ -0,0 +1,299 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:37 +0100
> > +Subject: [PATCH] ARM: import opcode helpers from Linux kernel
> > +
> > +Those are needed to generate some of the ARM SEC and VIRT
> > +opcodes in a portable way.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/include/asm/opcodes-virt.h | 39 +++++
> > + arch/arm/include/asm/opcodes.h | 231
> > ++++++++++++++++++++++++++++
> > + 2 files changed, 270 insertions(+)
> > + create mode 100644 arch/arm/include/asm/opcodes-virt.h
> > + create mode 100644 arch/arm/include/asm/opcodes.h
> > +
> > +diff --git a/arch/arm/include/asm/opcodes-virt.h
> > b/arch/arm/include/asm/opcodes-virt.h
> > +new file mode 100644
> > +index 000000000000..efcfdf92d9d5
> > +--- /dev/null
> > ++++ b/arch/arm/include/asm/opcodes-virt.h
> > +@@ -0,0 +1,39 @@
> > ++/*
> > ++ * opcodes-virt.h: Opcode definitions for the ARM virtualization
> > extensions
> > ++ * Copyright (C) 2012 Linaro Limited
> > ++ *
> > ++ * This program is free software; you can redistribute it and/or
> > modify
> > ++ * it under the terms of the GNU General Public License as
> > published by
> > ++ * the Free Software Foundation; either version 2 of the License,
> > or
> > ++ * (at your option) any later version.
> > ++ *
> > ++ * This program is distributed in the hope that it will be
> > useful,
> > ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > ++ * GNU General Public License for more details.
> > ++ *
> > ++ * You should have received a copy of the GNU General Public
> > License along
> > ++ * with this program; if not, write to the Free Software
> > Foundation, Inc.,
> > ++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
> > ++ */
> > ++#ifndef __ASM_ARM_OPCODES_VIRT_H
> > ++#define __ASM_ARM_OPCODES_VIRT_H
> > ++
> > ++#include <asm/opcodes.h>
> > ++
> > ++#define __HVC(imm16) __inst_arm_thumb32(
> > \
> > ++ 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) &
> > 0x000F), \
> > ++ 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) &
> > 0x0FFF) \
> > ++)
> > ++
> > ++#define __ERET __inst_arm_thumb32(
> > \
> > ++ 0xE160006E,
> > \
> > ++ 0xF3DE8F00
> > \
> > ++)
> > ++
> > ++#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32(
> > \
> > ++ 0xE12EF300 | regnum,
> > \
> > ++ 0xF3808E30 | (regnum << 16)
> > \
> > ++)
> > ++
> > ++#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
> > +diff --git a/arch/arm/include/asm/opcodes.h
> > b/arch/arm/include/asm/opcodes.h
> > +new file mode 100644
> > +index 000000000000..a78bf5d2c518
> > +--- /dev/null
> > ++++ b/arch/arm/include/asm/opcodes.h
> > +@@ -0,0 +1,231 @@
> > ++/*
> > ++ * arch/arm/include/asm/opcodes.h
> > ++ *
> > ++ * This program is free software; you can redistribute it and/or
> > modify
> > ++ * it under the terms of the GNU General Public License version 2
> > as
> > ++ * published by the Free Software Foundation.
> > ++ */
> > ++
> > ++#ifndef __ASM_ARM_OPCODES_H
> > ++#define __ASM_ARM_OPCODES_H
> > ++
> > ++#ifndef __ASSEMBLY__
> > ++#include <linux/linkage.h>
> > ++extern asmlinkage unsigned int arm_check_condition(u32 opcode,
> > u32 psr);
> > ++#endif
> > ++
> > ++#define ARM_OPCODE_CONDTEST_FAIL 0
> > ++#define ARM_OPCODE_CONDTEST_PASS 1
> > ++#define ARM_OPCODE_CONDTEST_UNCOND 2
> > ++
> > ++
> > ++/*
> > ++ * Assembler opcode byteswap helpers.
> > ++ * These are only intended for use by this header: don't use them
> > directly,
> > ++ * because they will be suboptimal in most cases.
> > ++ */
> > ++#define ___asm_opcode_swab32(x) ( \
> > ++ (((x) << 24) & 0xFF000000) \
> > ++ | (((x) << 8) & 0x00FF0000) \
> > ++ | (((x) >> 8) & 0x0000FF00) \
> > ++ | (((x) >> 24) & 0x000000FF) \
> > ++)
> > ++#define ___asm_opcode_swab16(x) ( \
> > ++ (((x) << 8) & 0xFF00) \
> > ++ | (((x) >> 8) & 0x00FF) \
> > ++)
> > ++#define ___asm_opcode_swahb32(x) ( \
> > ++ (((x) << 8) & 0xFF00FF00) \
> > ++ | (((x) >> 8) & 0x00FF00FF) \
> > ++)
> > ++#define ___asm_opcode_swahw32(x) ( \
> > ++ (((x) << 16) & 0xFFFF0000) \
> > ++ | (((x) >> 16) & 0x0000FFFF) \
> > ++)
> > ++#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
> > ++#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
> > ++
> > ++
> > ++/*
> > ++ * Opcode byteswap helpers
> > ++ *
> > ++ * These macros help with converting instructions between a
> > canonical integer
> > ++ * format and in-memory representation, in an endianness-agnostic
> > manner.
> > ++ *
> > ++ * __mem_to_opcode_*() convert from in-memory representation to
> > canonical form.
> > ++ * __opcode_to_mem_*() convert from canonical form to in-memory
> > representation.
> > ++ *
> > ++ *
> > ++ * Canonical instruction representation:
> > ++ *
> > ++ * ARM: 0xKKLLMMNN
> > ++ * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8
> > ++ * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8
> > ++ *
> > ++ * There is no way to distinguish an ARM instruction in canonical
> > representation
> > ++ * from a Thumb instruction (just as these cannot be
> > distinguished in memory).
> > ++ * Where this distinction is important, it needs to be tracked
> > separately.
> > ++ *
> > ++ * Note that values in the range 0x0000E800..0xE7FFFFFF
> > intentionally do not
> > ++ * represent any valid Thumb-2 instruction. For this range,
> > ++ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be
> > false.
> > ++ *
> > ++ * The ___asm variants are intended only for use by this header,
> > in situations
> > ++ * involving inline assembler. For .S files, the normal
> > __opcode_*() macros
> > ++ * should do the right thing.
> > ++ */
> > ++#ifdef __ASSEMBLY__
> > ++
> > ++#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
> > ++#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
> > ++#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
> > ++#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
> > ++#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
> > ++#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
> > ++
> > ++#else /* ! __ASSEMBLY__ */
> > ++
> > ++#include <linux/types.h>
> > ++#include <linux/swab.h>
> > ++
> > ++#define ___opcode_swab32(x) swab32(x)
> > ++#define ___opcode_swab16(x) swab16(x)
> > ++#define ___opcode_swahb32(x) swahb32(x)
> > ++#define ___opcode_swahw32(x) swahw32(x)
> > ++#define ___opcode_identity32(x) ((u32)(x))
> > ++#define ___opcode_identity16(x) ((u16)(x))
> > ++
> > ++#endif /* ! __ASSEMBLY__ */
> > ++
> > ++
> > ++#ifdef CONFIG_CPU_ENDIAN_BE8
> > ++
> > ++#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
> > ++#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
> > ++#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
> > ++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
> > ++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
> > ++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
> > ++
> > ++#else /* ! CONFIG_CPU_ENDIAN_BE8 */
> > ++
> > ++#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
> > ++#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
> > ++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
> > ++#define ___asm_opcode_to_mem_thumb16(x)
> > ___asm_opcode_identity16(x)
> > ++#ifndef CONFIG_CPU_ENDIAN_BE32
> > ++/*
> > ++ * On BE32 systems, using 32-bit accesses to store Thumb
> > instructions will not
> > ++ * work in all cases, due to alignment constraints. For now, a
> > correct
> > ++ * version is not provided for BE32.
> > ++ */
> > ++#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
> > ++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
> > ++#endif
> > ++
> > ++#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
> > ++
> > ++#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
> > ++#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
> > ++#ifndef CONFIG_CPU_ENDIAN_BE32
> > ++#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
> > ++#endif
> > ++
> > ++/* Operations specific to Thumb opcodes */
> > ++
> > ++/* Instruction size checks: */
> > ++#define __opcode_is_thumb32(x) ( \
> > ++ ((x) & 0xF8000000) == 0xE8000000 \
> > ++ || ((x) & 0xF0000000) == 0xF0000000 \
> > ++)
> > ++#define __opcode_is_thumb16(x) (
> > \
> > ++ ((x) & 0xFFFF0000) == 0
> > \
> > ++ && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) ==
> > 0xF000) \
> > ++)
> > ++
> > ++/* Operations to construct or split 32-bit Thumb instructions: */
> > ++#define __opcode_thumb32_first(x) (___opcode_identity16((x) >>
> > 16))
> > ++#define __opcode_thumb32_second(x) (___opcode_identity16(x))
> > ++#define __opcode_thumb32_compose(first, second) (
> > \
> > ++ (___opcode_identity32(___opcode_identity16(first)) <<
> > 16) \
> > ++ | ___opcode_identity32(___opcode_identity16(second))
> > \
> > ++)
> > ++#define ___asm_opcode_thumb32_first(x)
> > (___asm_opcode_identity16((x) >> 16))
> > ++#define ___asm_opcode_thumb32_second(x)
> > (___asm_opcode_identity16(x))
> > ++#define ___asm_opcode_thumb32_compose(first, second) (
> > \
> > ++ (___asm_opcode_identity32(___asm_opcode_identity16(firs
> > t)) << 16) \
> > ++ |
> > ___asm_opcode_identity32(___asm_opcode_identity16(second))
> > \
> > ++)
> > ++
> > ++/*
> > ++ * Opcode injection helpers
> > ++ *
> > ++ * In rare cases it is necessary to assemble an opcode which the
> > ++ * assembler does not support directly, or which would normally
> > be
> > ++ * rejected because of the CFLAGS or AFLAGS used to build the
> > affected
> > ++ * file.
> > ++ *
> > ++ * Before using these macros, consider carefully whether it is
> > feasible
> > ++ * instead to change the build flags for your file, or whether it
> > really
> > ++ * makes sense to support old assembler versions when building
> > that
> > ++ * particular kernel feature.
> > ++ *
> > ++ * The macros defined here should only be used where there is no
> > viable
> > ++ * alternative.
> > ++ *
> > ++ *
> > ++ * __inst_arm(x): emit the specified ARM opcode
> > ++ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
> > ++ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
> > ++ *
> > ++ * __inst_arm_thumb16(arm, thumb): emit either the specified arm
> > or
> > ++ * 16-bit Thumb opcode, depending on whether an ARM or
> > Thumb-2
> > ++ * kernel is being built
> > ++ *
> > ++ * __inst_arm_thumb32(arm, thumb): emit either the specified arm
> > or
> > ++ * 32-bit Thumb opcode, depending on whether an ARM or
> > Thumb-2
> > ++ * kernel is being built
> > ++ *
> > ++ *
> > ++ * Note that using these macros directly is poor
> > practice. Instead, you
> > ++ * should use them to define human-readable wrapper macros to
> > encode the
> > ++ * instructions that you care about. In code which might run on
> > ARMv7 or
> > ++ * above, you can usually use the __inst_arm_thumb{16,32} macros
> > to
> > ++ * specify the ARM and Thumb alternatives at the same time. This
> > ensures
> > ++ * that the correct opcode gets emitted depending on the
> > instruction set
> > ++ * used for the kernel build.
> > ++ *
> > ++ * Look at opcodes-virt.h for an example of how to use these
> > macros.
> > ++ */
> > ++#include <linux/stringify.h>
> > ++
> > ++#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
> > ++#define __inst_thumb32(x) ___inst_thumb32(
> > \
> > ++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(
> > x)), \
> > ++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second
> > (x)) \
> > ++)
> > ++#define __inst_thumb16(x)
> > ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
> > ++
> > ++#ifdef CONFIG_THUMB2_BAREBOX
> > ++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
> > ++ __inst_thumb16(thumb_opcode)
> > ++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
> > ++ __inst_thumb32(thumb_opcode)
> > ++#else
> > ++#define __inst_arm_thumb16(arm_opcode, thumb_opcode)
> > __inst_arm(arm_opcode)
> > ++#define __inst_arm_thumb32(arm_opcode, thumb_opcode)
> > __inst_arm(arm_opcode)
> > ++#endif
> > ++
> > ++/* Helpers for the helpers. Don't use these directly. */
> > ++#ifdef __ASSEMBLY__
> > ++#define ___inst_arm(x) .long x
> > ++#define ___inst_thumb16(x) .short x
> > ++#define ___inst_thumb32(first, second) .short first, second
> > ++#else
> > ++#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
> > ++#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
> > ++#define ___inst_thumb32(first, second) \
> > ++ ".short " __stringify(first) ", " __stringify(second)
> > "\n\t"
> > ++#endif
> > ++
> > ++#endif /* __ASM_ARM_OPCODES_H */
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0002-
> > ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-
> > switch-from-HYP-to-SVC-mode-if-required.patch
> > new file mode 100644
> > index 0000000..fcd116a
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-
> > safely-switch-from-HYP-to-SVC-mode-if-required.patch
> > @@ -0,0 +1,88 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:38 +0100
> > +Subject: [PATCH] ARM: safely switch from HYP to SVC mode if
> > required
> > +
> > +This is a port of the Linux safe_svcmode_maskall macro to
> > +the Barebox lowlevel init.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/cpu/lowlevel.S | 18 +++++++++++++++---
> > + arch/arm/include/asm/system.h | 26 ++++++++++++++++++++++++++
> > + 2 files changed, 41 insertions(+), 3 deletions(-)
> > +
> > +diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
> > +index 7696a198e764..43665981e48b 100644
> > +--- a/arch/arm/cpu/lowlevel.S
> > ++++ b/arch/arm/cpu/lowlevel.S
> > +@@ -1,16 +1,28 @@
> > + #include <linux/linkage.h>
> > + #include <init.h>
> > + #include <asm/system.h>
> > ++#include <asm/opcodes-virt.h>
> > +
> > + .section ".text_bare_init_","ax"
> > + ENTRY(arm_cpu_lowlevel_init)
> > + /* save lr, since it may be banked away with a processor
> > mode change */
> > + mov r2, lr
> > ++
> > + /* set the cpu to SVC32 mode, mask irq and fiq */
> > + mrs r12, cpsr
> > +- bic r12, r12, #0x1f
> > +- orr r12, r12, #0xd3
> > +- msr cpsr, r12
> > ++ eor r12, r12, #HYP_MODE
> > ++ tst r12, #MODE_MASK
> > ++ bic r12, r12, #MODE_MASK
> > ++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
> > ++THUMB( orr r12, r12, #PSR_T_BIT )
> > ++ bne 1f
> > ++ orr r12, r12, #PSR_A_BIT
> > ++ adr lr, 2f
> > ++ msr spsr_cxsf, r12
> > ++ __MSR_ELR_HYP(14)
> > ++ __ERET
> > ++1: msr cpsr_c, r12
> > ++2:
> > +
> > + #if __LINUX_ARM_ARCH__ >= 6
> > + /*
> > +diff --git a/arch/arm/include/asm/system.h
> > b/arch/arm/include/asm/system.h
> > +index 5cf828ea36cb..48242ab473f4 100644
> > +--- a/arch/arm/include/asm/system.h
> > ++++ b/arch/arm/include/asm/system.h
> > +@@ -60,6 +60,32 @@
> > + #define CR_AFE (1 << 29) /* Access flag enable
> > */
> > + #define CR_TE (1 << 30) /* Thumb exception enable
> > */
> > +
> > ++/*
> > ++ * PSR bits
> > ++ */
> > ++#define USR_MODE 0x00000010
> > ++#define FIQ_MODE 0x00000011
> > ++#define IRQ_MODE 0x00000012
> > ++#define SVC_MODE 0x00000013
> > ++#define ABT_MODE 0x00000017
> > ++#define HYP_MODE 0x0000001a
> > ++#define UND_MODE 0x0000001b
> > ++#define SYSTEM_MODE 0x0000001f
> > ++#define MODE32_BIT 0x00000010
> > ++#define MODE_MASK 0x0000001f
> > ++
> > ++#define PSR_T_BIT 0x00000020
> > ++#define PSR_F_BIT 0x00000040
> > ++#define PSR_I_BIT 0x00000080
> > ++#define PSR_A_BIT 0x00000100
> > ++#define PSR_E_BIT 0x00000200
> > ++#define PSR_J_BIT 0x01000000
> > ++#define PSR_Q_BIT 0x08000000
> > ++#define PSR_V_BIT 0x10000000
> > ++#define PSR_C_BIT 0x20000000
> > ++#define PSR_Z_BIT 0x40000000
> > ++#define PSR_N_BIT 0x80000000
> > ++
> > + #ifndef __ASSEMBLY__
> > + #if __LINUX_ARM_ARCH__ >= 7
> > + static inline unsigned int current_el(void)
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0003-
> > ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-
> > secure-monitor-code-to-be-built-without-PS.patch
> > new file mode 100644
> > index 0000000..eed9e52
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-
> > allow-secure-monitor-code-to-be-built-without-PS.patch
> > @@ -0,0 +1,37 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:39 +0100
> > +Subject: [PATCH] ARM: allow secure monitor code to be built
> > without PSCI
> > +
> > +The hyp mode handling added in the secure monitor code is also
> > useful
> > +when Barebox doesn't have PSCI control. Allow to build without
> > PSCI.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/cpu/sm_as.S | 4 ++++
> > + 1 file changed, 4 insertions(+)
> > +
> > +diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> > +index 09580e75de5f..0d01e1bf2435 100644
> > +--- a/arch/arm/cpu/sm_as.S
> > ++++ b/arch/arm/cpu/sm_as.S
> > +@@ -129,7 +129,9 @@ secure_monitor:
> > + sub sp, sp, #4*4 @ allocate
> > result structure on stack
> > + mov r12, sp
> > + push {r4-r6, r12}
> > ++#ifdef CONFIG_ARM_PSCI
> > + bl psci_entry
> > ++#endif
> > + pop {r4-r6, r12}
> > + ldm r12, {r0-r3}
> > + add sp, sp, #4*4
> > +@@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
> > + mcr p15, 0, r0, c1, c0, 1 @ ACTLR
> > +
> > + bl secure_monitor_stack_setup
> > ++#ifdef CONFIG_ARM_PSCI
> > + bl psci_cpu_entry_c
> > ++#endif
> > +
> > + ENDPROC(psci_cpu_entry)
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0004-
> > ARM-add-file-for-HYP-mode-related-setup.patch b/configs/platform-
> > v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-
> > related-setup.patch
> > new file mode 100644
> > index 0000000..8047922
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-
> > file-for-HYP-mode-related-setup.patch
> > @@ -0,0 +1,193 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:40 +0100
> > +Subject: [PATCH] ARM: add file for HYP mode related setup
> > +
> > +This adds routines to add hyp mode vectors and switch back to HYP
> > +mode from SVC. This is needed in both the PBL and Barebox proper.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/cpu/Makefile | 3 +
> > + arch/arm/cpu/hyp.S | 116
> > ++++++++++++++++++++++++++++++++++
> > + arch/arm/cpu/sm_as.S | 11 ----
> > + arch/arm/include/asm/secure.h | 3 +
> > + 4 files changed, 122 insertions(+), 11 deletions(-)
> > + create mode 100644 arch/arm/cpu/hyp.S
> > +
> > +diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
> > +index 874d723e2cee..0a403bc981c5 100644
> > +--- a/arch/arm/cpu/Makefile
> > ++++ b/arch/arm/cpu/Makefile
> > +@@ -4,6 +4,9 @@ obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions$(S64).o
> > interrupts$(S64).o
> > + obj-$(CONFIG_MMU) += mmu$(S64).o
> > + lwl-y += lowlevel$(S64).o
> > + obj-pbl-$(CONFIG_MMU) += mmu-early$(S64).o
> > ++obj-pbl-$(CONFIG_CPU_32v7) += hyp.o
> > ++AFLAGS_hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
> > ++AFLAGS_pbl-hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
> > +
> > + obj-y += start.o entry.o
> > +
> > +diff --git a/arch/arm/cpu/hyp.S b/arch/arm/cpu/hyp.S
> > +new file mode 100644
> > +index 000000000000..1314b56eab25
> > +--- /dev/null
> > ++++ b/arch/arm/cpu/hyp.S
> > +@@ -0,0 +1,116 @@
> > ++#include <linux/linkage.h>
> > ++#include <asm/system.h>
> > ++#include <asm/opcodes-virt.h>
> > ++#include <init.h>
> > ++
> > ++.arch_extension sec
> > ++.arch_extension virt
> > ++
> > ++__BARE_INIT
> > ++
> > ++.data
> > ++ .align 2
> > ++ENTRY(__boot_cpu_mode)
> > ++ .long 0
> > ++.text
> > ++
> > ++ENTRY(__hyp_install)
> > ++ mrs r12, cpsr
> > ++ and r12, r12, #MODE_MASK
> > ++
> > ++ @ Save the initial CPU state
> > ++ adr r0, .L__boot_cpu_mode_offset
> > ++ ldr r1, [r0]
> > ++ str r12, [r0, r1]
> > ++
> > ++ cmp r12, #HYP_MODE
> > ++ movne pc, lr @ give up if
> > the CPU is not in HYP mode
> > ++
> > ++ @ Now install the hypervisor stub:
> > ++ adr r12, __hyp_vectors
> > ++ mcr p15, 4, r12, c12, c0, 0 @ set
> > hypervisor vector base (HVBAR)
> > ++
> > ++ @ Disable all traps, so we don't get any nasty surprise
> > ++ mov r12, #0
> > ++ mcr p15, 4, r12, c1, c1, 0 @ HCR
> > ++ mcr p15, 4, r12, c1, c1, 2 @ HCPTR
> > ++ mcr p15, 4, r12, c1, c1, 3 @ HSTR
> > ++
> > ++THUMB( orr r12, #(1 << 30) ) @
> > HSCTLR.TE
> > ++ mcr p15, 4, r12, c1, c0, 0 @ HSCTLR
> > ++
> > ++ mrc p15, 4, r12, c1, c1, 1 @ HDCR
> > ++ and r12, #0x1f @ Preserve HPMN
> > ++ mcr p15, 4, r12, c1, c1, 1 @ HDCR
> > ++
> > ++ @ Make sure NS-SVC is initialised appropriately
> > ++ mrc p15, 0, r12, c1, c0, 0 @ SCTLR
> > ++ orr r12, #(1 << 5) @ CP15 barriers
> > enabled
> > ++ bic r12, #(3 << 7) @ Clear SED/ITD
> > for v8 (RES0 for v7)
> > ++ bic r12, #(3 << 19) @ WXN and UWXN
> > disabled
> > ++ mcr p15, 0, r12, c1, c0, 0 @ SCTLR
> > ++
> > ++ mrc p15, 0, r12, c0, c0, 0 @ MIDR
> > ++ mcr p15, 4, r12, c0, c0, 0 @ VPIDR
> > ++
> > ++ mrc p15, 0, r12, c0, c0, 5 @ MPIDR
> > ++ mcr p15, 4, r12, c0, c0, 5 @ VMPIDR
> > ++ bx lr
> > ++ENDPROC(__hyp_install)
> > ++
> > ++ENTRY(armv7_hyp_install)
> > ++ mov r2, lr
> > ++
> > ++ bl __hyp_install
> > ++
> > ++ /* set the cpu to SVC32 mode, mask irq and fiq */
> > ++ mrs r12, cpsr
> > ++ eor r12, r12, #HYP_MODE
> > ++ tst r12, #MODE_MASK
> > ++ bic r12, r12, #MODE_MASK
> > ++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
> > ++THUMB( orr r12, r12, #PSR_T_BIT )
> > ++ bne 1f
> > ++ orr r12, r12, #PSR_A_BIT
> > ++ adr lr, 2f
> > ++ msr spsr_cxsf, r12
> > ++ __MSR_ELR_HYP(14)
> > ++ __ERET
> > ++1: msr cpsr_c, r12
> > ++2:
> > ++ mov pc, r2
> > ++ENDPROC(armv7_hyp_install)
> > ++
> > ++ENTRY(armv7_switch_to_hyp)
> > ++ mov r0, lr
> > ++ mov r1, sp @ save SVC copy of LR
> > and SP
> > ++ isb
> > ++ hvc #0 @ for older asm: .byte
> > 0x70, 0x00, 0x40, 0xe1
> > ++ mov sp, r1
> > ++ mov lr, r0 @ restore SVC copy of LR
> > and SP
> > ++
> > ++ bx lr
> > ++ENDPROC(armv7_switch_to_hyp)
> > ++
> > ++.align 2
> > ++.L__boot_cpu_mode_offset:
> > ++ .long __boot_cpu_mode - .
> > ++
> > ++/* The HYP trap is crafted to match armv7_switch_to_hyp() */
> > ++__hyp_do_trap:
> > ++ mov lr, r0
> > ++ mov sp, r1
> > ++ bx lr
> > ++ENDPROC(__hyp_do_trap)
> > ++
> > ++.align 5
> > ++__hyp_vectors:
> > ++__hyp_reset: W(b) .
> > ++__hyp_und: W(b) .
> > ++__hyp_svc: W(b) .
> > ++__hyp_pabort: W(b) .
> > ++__hyp_dabort: W(b) .
> > ++__hyp_trap: W(b) __hyp_do_trap
> > ++__hyp_irq: W(b) .
> > ++__hyp_fiq: W(b) .
> > ++ENDPROC(__hyp_vectors)
> > +diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
> > +index 0d01e1bf2435..de6cd0406f4f 100644
> > +--- a/arch/arm/cpu/sm_as.S
> > ++++ b/arch/arm/cpu/sm_as.S
> > +@@ -148,17 +148,6 @@ hyp_trap:
> > + mov pc, lr @ do no switch
> > modes, but
> > + @ return to
> > caller
> > +
> > +-ENTRY(armv7_switch_to_hyp)
> > +- mov r0, lr
> > +- mov r1, sp @ save SVC copy of LR
> > and SP
> > +- isb
> > +- hvc #0 @ for older asm: .byte
> > 0x70, 0x00, 0x40, 0xe1
> > +- mov sp, r1
> > +- mov lr, r0 @ restore SVC copy of LR
> > and SP
> > +-
> > +- bx lr
> > +-ENDPROC(armv7_switch_to_hyp)
> > +-
> > + ENTRY(psci_cpu_entry)
> > + mrc p15, 0, r0, c1, c0, 1 @ ACTLR
> > + orr r0, r0, #(1 << 6) @ Set SMP bit
> > +diff --git a/arch/arm/include/asm/secure.h
> > b/arch/arm/include/asm/secure.h
> > +index a4cb1f6c1c44..663d81ea27dd 100644
> > +--- a/arch/arm/include/asm/secure.h
> > ++++ b/arch/arm/include/asm/secure.h
> > +@@ -5,9 +5,12 @@
> > +
> > + int armv7_secure_monitor_install(void);
> > + int __armv7_secure_monitor_install(void);
> > ++
> > + void armv7_switch_to_hyp(void);
> > ++void armv7_hyp_install(void);
> > +
> > + extern unsigned char secure_monitor_init_vectors[];
> > ++extern int __boot_cpu_mode;
> > +
> > + enum arm_security_state {
> > + ARM_STATE_SECURE,
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0005-
> > ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-
> > try-to-install-secure-monitor-when-entered.patch
> > new file mode 100644
> > index 0000000..b82de4b
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-
> > t-try-to-install-secure-monitor-when-entered.patch
> > @@ -0,0 +1,30 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:41 +0100
> > +Subject: [PATCH] ARM: don't try to install secure monitor when
> > entered in HYP
> > + mode
> > +
> > +When Barebox has been entered in HYP mode, the CPU is already
> > switched
> > +to the non-secure world and it's not possible for Barebox to
> > install
> > +it's own secure monitor.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/cpu/sm.c | 3 +++
> > + 1 file changed, 3 insertions(+)
> > +
> > +diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
> > +index cb0bac106b5f..1246d8e3a441 100644
> > +--- a/arch/arm/cpu/sm.c
> > ++++ b/arch/arm/cpu/sm.c
> > +@@ -184,6 +184,9 @@ int armv7_secure_monitor_install(void)
> > + return -EINVAL;
> > + }
> > +
> > ++ if (__boot_cpu_mode == HYP_MODE)
> > ++ return 0;
> > ++
> > + mmuon = get_cr() & CR_M;
> > +
> > + vbar = get_vbar();
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0006-
> > ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-
> > to-starting-kernel-in-HYP-mode-when-ente.patch
> > new file mode 100644
> > index 0000000..1de95c1
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-
> > default-to-starting-kernel-in-HYP-mode-when-ente.patch
> > @@ -0,0 +1,31 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:42 +0100
> > +Subject: [PATCH] ARM: default to starting kernel in HYP mode when
> > entered in
> > + HYP
> > +
> > +When Barebox has been entered in HYP mode, there is a high chance
> > that
> > +the kernel is intended to be started in HYP mode also. Get this
> > +default into place.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/cpu/sm.c | 3 +++
> > + 1 file changed, 3 insertions(+)
> > +
> > +diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
> > +index 1246d8e3a441..6fad30adabc9 100644
> > +--- a/arch/arm/cpu/sm.c
> > ++++ b/arch/arm/cpu/sm.c
> > +@@ -262,6 +262,9 @@ static int sm_init(void)
> > + bootm_secure_state_names,
> > + ARRAY_SIZE(bootm_secure_state_n
> > ames));
> > +
> > ++ if (__boot_cpu_mode == HYP_MODE)
> > ++ bootm_secure_state = ARM_STATE_HYP;
> > ++
> > + return 0;
> > + }
> > + device_initcall(sm_init);
> > +\ No newline at end of file
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0007-
> > ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-
> > HYP-vectors-at-PBL-and-Barebox-entry.patch
> > new file mode 100644
> > index 0000000..10615e9
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-
> > install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> > @@ -0,0 +1,105 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:43 +0100
> > +Subject: [PATCH] ARM: install HYP vectors at PBL and Barebox entry
> > +
> > +If the CPU was already in HYP mode when entering the PBL, install
> > a
> > +simple trap handler to allow to get back from SVC to HYP before
> > +switching to HYP mode.
> > +
> > +As the vectors are part of the currently running binary, we need
> > to
> > +do the same setup when starting the real Barebox binary, as the
> > PBL
> > +setup vectors might get overwritten. To do this we trap into HYP
> > mode
> > +just before jumping to Barebox and then re-do the vector setup and
> > +SVC switch as the first thing in Barebox proper.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/cpu/lowlevel.S | 5 +++++
> > + arch/arm/cpu/start-pbl.c | 4 ++++
> > + arch/arm/cpu/start.c | 5 +++++
> > + arch/arm/cpu/uncompress.c | 4 ++++
> > + 4 files changed, 18 insertions(+)
> > +
> > +diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
> > +index 43665981e48b..3b52644e43e1 100644
> > +--- a/arch/arm/cpu/lowlevel.S
> > ++++ b/arch/arm/cpu/lowlevel.S
> > +@@ -8,6 +8,11 @@ ENTRY(arm_cpu_lowlevel_init)
> > + /* save lr, since it may be banked away with a processor
> > mode change */
> > + mov r2, lr
> > +
> > ++#ifdef CONFIG_CPU_32v7
> > ++ /* careful: the hyp install corrupts r0 and r1 */
> > ++ bl __hyp_install
> > ++#endif
> > ++
> > + /* set the cpu to SVC32 mode, mask irq and fiq */
> > + mrs r12, cpsr
> > + eor r12, r12, #HYP_MODE
> > +diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
> > +index 16159d7f9d51..48a808645671 100644
> > +--- a/arch/arm/cpu/start-pbl.c
> > ++++ b/arch/arm/cpu/start-pbl.c
> > +@@ -26,6 +26,7 @@
> > + #include <asm/barebox-arm-head.h>
> > + #include <asm-generic/memory_layout.h>
> > + #include <asm/sections.h>
> > ++#include <asm/secure.h>
> > + #include <asm/cache.h>
> > + #include <asm/mmu.h>
> > + #include <asm/unaligned.h>
> > +@@ -98,5 +99,8 @@ __noreturn void
> > barebox_single_pbl_start(unsigned long membase,
> > + else
> > + barebox = (void *)barebox_base;
> > +
> > ++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode ==
> > HYP_MODE)
> > ++ armv7_switch_to_hyp();
> > ++
> > + barebox(membase, memsize, boarddata);
> > + }
> > +diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
> > +index 64bd942ad764..a79d64eaa6e6 100644
> > +--- a/arch/arm/cpu/start.c
> > ++++ b/arch/arm/cpu/start.c
> > +@@ -24,6 +24,7 @@
> > + #include <asm/barebox-arm-head.h>
> > + #include <asm-generic/memory_layout.h>
> > + #include <asm/sections.h>
> > ++#include <asm/secure.h>
> > + #include <asm/unaligned.h>
> > + #include <asm/cache.h>
> > + #include <asm/mmu.h>
> > +@@ -147,6 +148,10 @@ __noreturn void
> > barebox_non_pbl_start(unsigned long membase,
> > + unsigned long barebox_base =
> > arm_mem_barebox_image(membase,
> > + endmem
> > ,
> > + barebo
> > x_size);
> > ++
> > ++ if (IS_ENABLED(CONFIG_CPU_V7))
> > ++ armv7_hyp_install();
> > ++
> > + if (IS_ENABLED(CONFIG_RELOCATABLE))
> > + relocate_to_adr(barebox_base);
> > +
> > +diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
> > +index 43b49b42120b..048bca0c9599 100644
> > +--- a/arch/arm/cpu/uncompress.c
> > ++++ b/arch/arm/cpu/uncompress.c
> > +@@ -27,6 +27,7 @@
> > + #include <asm/barebox-arm-head.h>
> > + #include <asm-generic/memory_layout.h>
> > + #include <asm/sections.h>
> > ++#include <asm/secure.h>
> > + #include <asm/cache.h>
> > + #include <asm/mmu.h>
> > + #include <asm/unaligned.h>
> > +@@ -105,5 +106,8 @@ void __noreturn
> > barebox_multi_pbl_start(unsigned long membase,
> > +
> > + pr_debug("jumping to uncompressed image at 0x%p\n",
> > barebox);
> > +
> > ++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode ==
> > HYP_MODE)
> > ++ armv7_switch_to_hyp();
> > ++
> > + barebox(membase, memsize, boarddata);
> > + }
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0008-
> > ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> > b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-
> > revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> > new file mode 100644
> > index 0000000..9aa90b5
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-
> > add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> > @@ -0,0 +1,41 @@
> > +From: Enrico Joerns <ejo@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:44 +0100
> > +Subject: [PATCH] ARM: rpi: add revision IDs for Pi 3 Model B and
> > Pi Zero
> > +
> > +Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
> > + arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
> > + 2 files changed, 6 insertions(+)
> > +
> > +diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c
> > b/arch/arm/boards/raspberry-pi/rpi-common.c
> > +index 6e375bc984de..3baed6525586 100644
> > +--- a/arch/arm/boards/raspberry-pi/rpi-common.c
> > ++++ b/arch/arm/boards/raspberry-pi/rpi-common.c
> > +@@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[]
> > = {
> > + const struct rpi_model rpi_models_new_scheme[] = {
> > + RPI_MODEL(0, "Unknown model", NULL),
> > + RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B",
> > rpi_b_plus_init),
> > ++ RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B",
> > rpi_b_plus_init),
> > ++ RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero",
> > rpi_b_plus_init),
> > + };
> > +
> > + static int rpi_board_rev = 0;
> > +diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h
> > b/arch/arm/mach-bcm283x/include/mach/mbox.h
> > +index 2b5aea88ee0a..0d1ac074e328 100644
> > +--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
> > ++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
> > +@@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
> > +
> > + /* RPi 2 */
> > + #define BCM2836_BOARD_REV_2_B 0x4
> > ++/* RPi 3 */
> > ++#define BCM2837_BOARD_REV_3_B 0x8
> > ++/* Zero */
> > ++#define BCM2835_BOARD_REV_ZERO 0x9
> > +
> > + /*
> > + * 0x2..0xf from:
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0009-
> > ARM-rpi-add-raspberry-pi-3-support.patch b/configs/platform-
> > v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-
> > support.patch
> > new file mode 100644
> > index 0000000..8e8d76a
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-
> > add-raspberry-pi-3-support.patch
> > @@ -0,0 +1,141 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:45 +0100
> > +Subject: [PATCH] ARM: rpi: add raspberry pi 3 support
> > +
> > +This adds basic support at the same feature level as the other
> > +supported raspberry pi boards.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/boards/raspberry-pi/lowlevel.c | 14 ++++++++++++--
> > + arch/arm/configs/rpi_defconfig | 2 ++
> > + arch/arm/dts/Makefile | 1 +
> > + arch/arm/dts/bcm2837-rpi-3.dts | 16 ++++++++++++++++
> > + arch/arm/mach-bcm283x/Kconfig | 6 ++++++
> > + arch/arm/mach-bcm283x/core.c | 1 +
> > + images/Makefile.bcm283x | 4 ++++
> > + 7 files changed, 42 insertions(+), 2 deletions(-)
> > + create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts
> > +
> > +diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c
> > b/arch/arm/boards/raspberry-pi/lowlevel.c
> > +index cbc6caa4b9ed..34c9350920e9 100644
> > +--- a/arch/arm/boards/raspberry-pi/lowlevel.c
> > ++++ b/arch/arm/boards/raspberry-pi/lowlevel.c
> > +@@ -1,7 +1,7 @@
> > ++#include <asm/barebox-arm.h>
> > ++#include <asm/cache.h>
> > + #include <common.h>
> > + #include <linux/sizes.h>
> > +-#include <asm/barebox-arm.h>
> > +-#include <asm/barebox-arm-head.h>
> > + #include <mach/platform.h>
> > +
> > + extern char __dtb_bcm2835_rpi_start[];
> > +@@ -23,3 +23,13 @@ ENTRY_FUNCTION(start_raspberry_pi2, r0, r1, r2)
> > +
> > + barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
> > + }
> > ++
> > ++extern char __dtb_bcm2837_rpi_3_start[];
> > ++ENTRY_FUNCTION(start_raspberry_pi3, r0, r1, r2)
> > ++{
> > ++ void *fdt = __dtb_bcm2837_rpi_3_start +
> > get_runtime_offset();
> > ++
> > ++ arm_cpu_lowlevel_init();
> > ++
> > ++ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
> > ++}
> > +diff --git a/arch/arm/configs/rpi_defconfig
> > b/arch/arm/configs/rpi_defconfig
> > +index f3aef4290425..cd88b4ac751c 100644
> > +--- a/arch/arm/configs/rpi_defconfig
> > ++++ b/arch/arm/configs/rpi_defconfig
> > +@@ -1,9 +1,11 @@
> > + CONFIG_ARCH_BCM283X=y
> > + CONFIG_MACH_RPI=y
> > + CONFIG_MACH_RPI2=y
> > ++CONFIG_MACH_RPI3=y
> > + CONFIG_AEABI=y
> > + CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> > + CONFIG_ARM_UNWIND=y
> > ++CONFIG_IMAGE_COMPRESSION_NONE=y
> > + CONFIG_MMU=y
> > + CONFIG_MALLOC_TLSF=y
> > + CONFIG_KALLSYMS=y
> > +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > +index 1caeca35b484..4e063902c635 100644
> > +--- a/arch/arm/dts/Makefile
> > ++++ b/arch/arm/dts/Makefile
> > +@@ -71,6 +71,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) +=
> > rk3288-phycore-som.dtb.o
> > + pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
> > + pbl-dtb-$(CONFIG_MACH_RPI) += bcm2835-rpi.dtb.o
> > + pbl-dtb-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
> > ++pbl-dtb-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
> > + pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-
> > sabrelite.dtb.o
> > + pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
> > + pbl-dtb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-
> > sdb.dtb.o
> > +diff --git a/arch/arm/dts/bcm2837-rpi-3.dts
> > b/arch/arm/dts/bcm2837-rpi-3.dts
> > +new file mode 100644
> > +index 000000000000..d6ffc369122c
> > +--- /dev/null
> > ++++ b/arch/arm/dts/bcm2837-rpi-3.dts
> > +@@ -0,0 +1,16 @@
> > ++#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
> > ++
> > ++/ {
> > ++ chosen {
> > ++ stdout-path = &uart0;
> > ++ };
> > ++
> > ++ memory {
> > ++ reg = <0x0 0x0>;
> > ++ };
> > ++};
> > ++
> > ++&uart0 {
> > ++ status = "okay";
> > ++ /delete-node/ bluetooth;
> > ++};
> > +diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-
> > bcm283x/Kconfig
> > +index 1457f114ccaa..af2f88c47acb 100644
> > +--- a/arch/arm/mach-bcm283x/Kconfig
> > ++++ b/arch/arm/mach-bcm283x/Kconfig
> > +@@ -19,6 +19,12 @@ config MACH_RPI2
> > + select CPU_V7
> > + select MACH_RPI_COMMON
> > +
> > ++config MACH_RPI3
> > ++ bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
> > ++ select CPU_V7
> > ++ select MACH_RPI_COMMON
> > ++ select ARM_SECURE_MONITOR
> > ++
> > + endmenu
> > +
> > + config MACH_RPI_DEBUG_UART_BASE
> > +diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-
> > bcm283x/core.c
> > +index fddcb0d1a1d4..26f0996b1cb8 100644
> > +--- a/arch/arm/mach-bcm283x/core.c
> > ++++ b/arch/arm/mach-bcm283x/core.c
> > +@@ -41,6 +41,7 @@ static int bcm2835_clk_init(void)
> > + clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
> > + clk_register_clkdev(clk, NULL, "uart0-pl0110");
> > + clk_register_clkdev(clk, NULL, "20201000.serial");
> > ++ clk_register_clkdev(clk, NULL, "3f201000.serial");
> > +
> > + clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
> > + clk_register_clkdev(clk, NULL, "bcm2835-cs");
> > +diff --git a/images/Makefile.bcm283x b/images/Makefile.bcm283x
> > +index d59ef043f05c..d14e648926ac 100644
> > +--- a/images/Makefile.bcm283x
> > ++++ b/images/Makefile.bcm283x
> > +@@ -9,3 +9,7 @@ image-$(CONFIG_MACH_RPI) += barebox-raspberry-pi-
> > 1.img
> > + pblx-$(CONFIG_MACH_RPI2) += start_raspberry_pi2
> > + FILE_barebox-raspberry-pi-2.img = start_raspberry_pi2.pblx
> > + image-$(CONFIG_MACH_RPI2) += barebox-raspberry-pi-2.img
> > ++
> > ++pblx-$(CONFIG_MACH_RPI3) += start_raspberry_pi3
> > ++FILE_barebox-raspberry-pi-3.img = start_raspberry_pi3.pblx
> > ++image-$(CONFIG_MACH_RPI3) += barebox-raspberry-pi-3.img
> > +\ No newline at end of file
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0010-
> > ARM-rpi-autosize-malloc-area.patch b/configs/platform-
> > v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-
> > area.patch
> > new file mode 100644
> > index 0000000..da498ba
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-
> > autosize-malloc-area.patch
> > @@ -0,0 +1,25 @@
> > +From: Lucas Stach <l.stach@pengutronix.de>
> > +Date: Thu, 1 Nov 2018 10:18:46 +0100
> > +Subject: [PATCH] ARM: rpi: autosize malloc area
> > +
> > +Autosize the malloc area according to the available RAM size.
> > +
> > +Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
> > +Tested-by: Roland Hieber <r.hieber@pengutronix.de>
> > +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > +---
> > + arch/arm/configs/rpi_defconfig | 1 +
> > + 1 file changed, 1 insertion(+)
> > +
> > +diff --git a/arch/arm/configs/rpi_defconfig
> > b/arch/arm/configs/rpi_defconfig
> > +index cd88b4ac751c..2bb615849324 100644
> > +--- a/arch/arm/configs/rpi_defconfig
> > ++++ b/arch/arm/configs/rpi_defconfig
> > +@@ -7,6 +7,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> > + CONFIG_ARM_UNWIND=y
> > + CONFIG_IMAGE_COMPRESSION_NONE=y
> > + CONFIG_MMU=y
> > ++CONFIG_MALLOC_SIZE=0x0
> > + CONFIG_MALLOC_TLSF=y
> > + CONFIG_KALLSYMS=y
> > + CONFIG_PROMPT="R-Pi> "
> > diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0101-
> > ARM-imx-add-support-for-Udoo-Neo-full.patch b/configs/platform-
> > v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-
> > Neo-full.patch
> > similarity index 93%
> > rename from configs/platform-v7a/patches/barebox-2018.05.0/0101-
> > ARM-imx-add-support-for-Udoo-Neo-full.patch
> > rename to configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-
> > imx-add-support-for-Udoo-Neo-full.patch
> > index 06c356b..9f99a39 100644
> > --- a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-
> > add-support-for-Udoo-Neo-full.patch
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-
> > add-support-for-Udoo-Neo-full.patch
> > @@ -26,10 +26,10 @@ Forwarded: id:20170627190317.19253-1-uwe@kleine
> > -koenig.org
> > create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts
> >
> > diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> > -index 30f4c299f1a1..f70fbac8f379 100644
> > +index c737cf34138c..9aee9bf0993a 100644
> > --- a/arch/arm/boards/Makefile
> > +++ b/arch/arm/boards/Makefile
> > -@@ -135,6 +135,7 @@ obj-$(CONFIG_MACH_TX51)
> > += karo-tx51/
> > +@@ -137,6 +137,7 @@ obj-$(CONFIG_MACH_TX51)
> > += karo-tx51/
> > obj-$(CONFIG_MACH_TX53) += karo-
> > tx53/
> > obj-$(CONFIG_MACH_TX6X) += karo-
> > tx6x/
> > obj-$(CONFIG_MACH_UDOO) += udoo/
> > @@ -254,10 +254,10 @@ index 000000000000..e78c2685fd78
> > + imx6sx_barebox_entry(fdt);
> > +}
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > -index e60e0ea0c6be..b87e27c8c263 100644
> > +index 4e063902c635..3d34a78f7878 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > -@@ -93,6 +93,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
> > +@@ -97,6 +97,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
> > pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
> > pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-
> > bb.dtb.o
> > pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
> > @@ -276,10 +276,10 @@ index 000000000000..9203d40207c5
> > +/{
> > +};
> > diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> > -index 9052a94ea071..9ec95bb6df09 100644
> > +index 63a92bd5bd1d..ab515ecf2286 100644
> > --- a/arch/arm/mach-imx/Kconfig
> > +++ b/arch/arm/mach-imx/Kconfig
> > -@@ -377,6 +377,10 @@ config MACH_UDOO
> > +@@ -380,6 +380,10 @@ config MACH_UDOO
> > bool "Freescale i.MX6 UDOO Board"
> > select ARCH_IMX6
> >
> > @@ -291,22 +291,22 @@ index 9052a94ea071..9ec95bb6df09 100644
> > bool "Variscite i.MX6 Quad SOM"
> > select ARCH_IMX6
> > diff --git a/arch/arm/mach-imx/include/mach/esdctl.h
> > b/arch/arm/mach-imx/include/mach/esdctl.h
> > -index 66dcc8974cfb..bd6092febca4 100644
> > +index bc6c7339535e..18c4a2836007 100644
> > --- a/arch/arm/mach-imx/include/mach/esdctl.h
> > +++ b/arch/arm/mach-imx/include/mach/esdctl.h
> > -@@ -137,6 +137,7 @@ void __noreturn imx51_barebox_entry(void
> > *boarddata);
> > - void __noreturn imx53_barebox_entry(void *boarddata);
> > - void __noreturn imx6q_barebox_entry(void *boarddata);
> > - void __noreturn imx6ul_barebox_entry(void *boarddata);
> > +@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void
> > *boarddata);
> > + void __noreturn vf610_barebox_entry(void *boarddata);
> > + void __noreturn imx8mq_barebox_entry(void *boarddata);
> > + void __noreturn imx7d_barebox_entry(void *boarddata);
> > +#define imx6sx_barebox_entry(boarddata)
> > imx6ul_barebox_entry(boarddata)
> > void imx_esdctl_disable(void);
> > #endif
> >
> > diff --git a/images/Makefile.imx b/images/Makefile.imx
> > -index 90da95d4d025..6420490811f9 100644
> > +index 341ce8506d88..c32f78b7e184 100644
> > --- a/images/Makefile.imx
> > +++ b/images/Makefile.imx
> > -@@ -275,6 +275,11 @@ CFG_start_imx6q_sabresd.pblx.imximg =
> > $(board)/freescale-mx6-sabresd/flash-heade
> > +@@ -271,6 +271,11 @@ CFG_start_imx6q_sabresd.pblx.imximg =
> > $(board)/freescale-mx6-sabresd/flash-heade
> > FILE_barebox-freescale-imx6q-sabresd.img =
> > start_imx6q_sabresd.pblx.imximg
> > image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-
> > sabresd.img
> >
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0201-
> > Release-pengutronix_multiv7-20181122-1.patch b/configs/platform-
> > v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-
> > 20181122-1.patch
> > new file mode 100644
> > index 0000000..bd444f0
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-
> > pengutronix_multiv7-20181122-1.patch
> > @@ -0,0 +1,22 @@
> > +From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> > +Date: Thu, 22 Nov 2018 12:09:22 +0100
> > +Subject: [PATCH] Release pengutronix_multiv7/20181122-1
> > +
> > +Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
> > +---
> > + Makefile | 2 +-
> > + 1 file changed, 1 insertion(+), 1 deletion(-)
> > +
> > +diff --git a/Makefile b/Makefile
> > +index 60a5d5ce11f4..b55ca4b03129 100644
> > +--- a/Makefile
> > ++++ b/Makefile
> > +@@ -1,7 +1,7 @@
> > + VERSION = 2018
> > + PATCHLEVEL = 11
> > + SUBLEVEL = 0
> > +-EXTRAVERSION =
> > ++EXTRAVERSION =-20181122-1
> > + NAME = None
> > +
> > + # *DOCUMENTATION*
> > diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/series
> > b/configs/platform-v7a/patches/barebox-2018.11.0/series
> > new file mode 100644
> > index 0000000..e056b0c
> > --- /dev/null
> > +++ b/configs/platform-v7a/patches/barebox-2018.11.0/series
> > @@ -0,0 +1,24 @@
> > +# umpf-base: v2018.11.0
> > +# umpf-name: pengutronix_multiv7
> > +# umpf-version: pengutronix_multiv7/20181122-1
> > +# umpf-topic: v2018.11.0/customers/pengutronix/rpi3
> > +# umpf-hashinfo: 1bdd9ef32c272ba5501e24ba643107855dd5149c
> > +# umpf-topic-range:
> > d1f223eddbcde31ba2a3f34fc0a1a14f40ea7130..1bdd9ef32c272ba5501e24ba6
> > 43107855dd5149c
> > +0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
> > +0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
> > +0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
> > +0004-ARM-add-file-for-HYP-mode-related-setup.patch
> > +0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
> > +0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
> > +0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
> > +0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
> > +0009-ARM-rpi-add-raspberry-pi-3-support.patch
> > +0010-ARM-rpi-autosize-malloc-area.patch
> > +# umpf-topic: v2018.11.0/customers/pengutronix/udoo-neo
> > +# umpf-hashinfo: c5f2e150d7e8d5439458df1a2cab71b25fc36e19
> > +# umpf-topic-range:
> > 1bdd9ef32c272ba5501e24ba643107855dd5149c..8cacc208f8f6c9071113b12a6
> > 18a54d7e80b1694
> > +0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
> > +# umpf-release: pengutronix_multiv7/20181122-1
> > +# umpf-topic-range:
> > 8cacc208f8f6c9071113b12a618a54d7e80b1694..45c64f6b4690a6b51be1c487d
> > e1ffec6472704e1
> > +0201-Release-pengutronix_multiv7-20181122-1.patch
> > +# umpf-end
> > diff --git a/configs/platform-v7a/platformconfig
> > b/configs/platform-v7a/platformconfig
> > index cdea840..e2c8ac1 100644
> > --- a/configs/platform-v7a/platformconfig
> > +++ b/configs/platform-v7a/platformconfig
> > @@ -166,6 +166,8 @@ PTXCONF_BAREBOX_AM335X=y
> > PTXCONF_BAREBOX_MX6=y
> > PTXCONF_BAREBOX_RPI2=y
> > PTXCONF_BAREBOX_RPI2_NEEDS_HOST_LZOP=y
> > +PTXCONF_BAREBOX_RPI3=y
> > +# PTXCONF_BAREBOX_RPI3_NEEDS_HOST_LZOP is not set
> > PTXCONF_BAREBOX_VEXPRESS=y
> > PTXCONF_BAREBOX_ARCH_STRING="arm"
> > # PTXCONF_BAREBOX is not set
> > diff --git a/configs/platform-v7a/rules/barebox-am335x-mlo.make
> > b/configs/platform-v7a/rules/barebox-am335x-mlo.make
> > index e71d057..6835d35 100644
> > --- a/configs/platform-v7a/rules/barebox-am335x-mlo.make
> > +++ b/configs/platform-v7a/rules/barebox-am335x-mlo.make
> > @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X_MLO) +=
> > barebox-am335x-mlo
> > #
> > # Paths and names
> > #
> > -BAREBOX_AM335X_MLO_VERSION := 2018.05.0
> > -BAREBOX_AM335X_MLO_MD5 :=
> > 8286a8ea2cdd88104e5c6762d93d81db
> > +BAREBOX_AM335X_MLO_VERSION := 2018.11.0
> > +BAREBOX_AM335X_MLO_MD5 :=
> > 1472eae302647d1cf7f1c561a6380b43
> > BAREBOX_AM335X_MLO := barebox-
> > $(BAREBOX_AM335X_MLO_VERSION)
> > BAREBOX_AM335X_MLO_SUFFIX := tar.bz2
> > BAREBOX_AM335X_MLO_DIR := $(BUILDDIR)/barebox-
> > am335x-mlo-$(BAREBOX_AM335X_MLO_VERSION)
> > diff --git a/configs/platform-v7a/rules/barebox-am335x.make
> > b/configs/platform-v7a/rules/barebox-am335x.make
> > index 2c35ae1..8b3c2a0 100644
> > --- a/configs/platform-v7a/rules/barebox-am335x.make
> > +++ b/configs/platform-v7a/rules/barebox-am335x.make
> > @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X) += barebox-
> > am335x
> > #
> > # Paths and names
> > #
> > -BAREBOX_AM335X_VERSION := 2018.05.0
> > -BAREBOX_AM335X_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> > +BAREBOX_AM335X_VERSION := 2018.11.0
> > +BAREBOX_AM335X_MD5 := 1472eae302647d1cf7f1c561a6380b43
> > BAREBOX_AM335X := barebox-$(BAREBOX_AM335X_VERSION)
> > BAREBOX_AM335X_SUFFIX := tar.bz2
> > BAREBOX_AM335X_DIR := $(BUILDDIR)/barebox-am335x-
> > $(BAREBOX_AM335X_VERSION)
> > diff --git a/configs/platform-v7a/rules/barebox-mx6.make
> > b/configs/platform-v7a/rules/barebox-mx6.make
> > index 7d7c2ce..3b86ea0 100644
> > --- a/configs/platform-v7a/rules/barebox-mx6.make
> > +++ b/configs/platform-v7a/rules/barebox-mx6.make
> > @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_MX6) += barebox-mx6
> > #
> > # Paths and names
> > #
> > -BAREBOX_MX6_VERSION := 2018.05.0
> > -BAREBOX_MX6_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> > +BAREBOX_MX6_VERSION := 2018.11.0
> > +BAREBOX_MX6_MD5 := 1472eae302647d1cf7f1c561a6380b43
> > BAREBOX_MX6 := barebox-$(BAREBOX_MX6_VERSION)
> > BAREBOX_MX6_SUFFIX := tar.bz2
> > BAREBOX_MX6_DIR := $(BUILDDIR)/barebox-mx6-
> > $(BAREBOX_MX6_VERSION)
> > diff --git a/configs/platform-v7a/rules/barebox-rpi2.make
> > b/configs/platform-v7a/rules/barebox-rpi2.make
> > index cf9fc00..41990a0 100644
> > --- a/configs/platform-v7a/rules/barebox-rpi2.make
> > +++ b/configs/platform-v7a/rules/barebox-rpi2.make
> > @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_RPI2) += barebox-rpi2
> > #
> > # Paths and names
> > #
> > -BAREBOX_RPI2_VERSION := 2018.05.0
> > -BAREBOX_RPI2_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
> > +BAREBOX_RPI2_VERSION := 2018.11.0
> > +BAREBOX_RPI2_MD5 := 1472eae302647d1cf7f1c561a6380b43
> > BAREBOX_RPI2 := barebox-$(BAREBOX_RPI2_VERSION)
> > BAREBOX_RPI2_SUFFIX := tar.bz2
> > BAREBOX_RPI2_DIR := $(BUILDDIR)/barebox-rpi2-
> > $(BAREBOX_RPI2_VERSION)
> > diff --git a/configs/platform-v7a/rules/barebox-rpi3.make
> > b/configs/platform-v7a/rules/barebox-rpi3.make
> > new file mode 100644
> > index 0000000..35b7e5b
> > --- /dev/null
> > +++ b/configs/platform-v7a/rules/barebox-rpi3.make
> > @@ -0,0 +1,104 @@
> > +# -*-makefile-*-
> > +#
> > +# Copyright (C) 2016 by Alexander Aring <aar@pengutronix.de>
> > +#
> > +# See CREDITS for details about who has contributed to this
> > project.
> > +#
> > +# For further information about the PTXdist project and license
> > conditions
> > +# see the README file.
> > +#
> > +
> > +#
> > +# We provide this package
> > +#
> > +PACKAGES-$(PTXCONF_BAREBOX_RPI3) += barebox-rpi3
> > +
> > +#
> > +# Paths and names
> > +#
> > +BAREBOX_RPI3_VERSION := 2018.11.0
> > +BAREBOX_RPI3_MD5 := 1472eae302647d1cf7f1c561a6380b43
> > +BAREBOX_RPI3 := barebox-$(BAREBOX_RPI3_VERSION)
> > +BAREBOX_RPI3_SUFFIX := tar.bz2
> > +BAREBOX_RPI3_DIR := $(BUILDDIR)/barebox-rpi3-
> > $(BAREBOX_RPI3_VERSION)
> > +BAREBOX_RPI3_CONFIG := $(call ptx/in-platformconfigdir,
> > barebox-rpi3.config)
> > +BAREBOX_RPI3_LICENSE := GPL-2.0
> > +BAREBOX_RPI3_URL := $(call barebox-url, BAREBOX_RPI3)
> > +BAREBOX_RPI3_SOURCE :=
> > $(SRCDIR)/$(BAREBOX_RPI3).$(BAREBOX_RPI3_SUFFIX)
> > +
> > +# ----------------------------------------------------------------
> > ------------
> > +# Prepare
> > +# ----------------------------------------------------------------
> > ------------
> > +
> > +BAREBOX_RPI3_WRAPPER_BLACKLIST := \
> > + TARGET_HARDEN_RELRO \
> > + TARGET_HARDEN_BINDNOW \
> > + TARGET_HARDEN_PIE \
> > + TARGET_DEBUG \
> > + TARGET_BUILD_ID
> > +
> > +BAREBOX_RPI3_CONF_ENV := KCONFIG_NOTIMESTAMP=1
> > +BAREBOX_RPI3_CONF_OPT := $(call barebox-opts, BAREBOX_RPI3)
> > +
> > +BAREBOX_RPI3_MAKE_ENV := $(BAREBOX_RPI3_CONF_ENV)
> > +BAREBOX_RPI3_MAKE_OPT := $(BAREBOX_RPI3_CONF_OPT)
> > +
> > +BAREBOX_RPI3_IMAGES := images/barebox-raspberry-pi-3.img
> > +BAREBOX_RPI3_IMAGES := $(addprefix
> > $(BAREBOX_RPI3_DIR)/,$(BAREBOX_RPI3_IMAGES))
> > +
> > +ifdef PTXCONF_BAREBOX_RPI3
> > +$(BAREBOX_RPI3_CONFIG):
> > + @echo
> > + @echo
> > "******************************************************************
> > **********"
> > + @echo " Please generate a bareboxconfig with 'ptxdist
> > menuconfig barebox-rpi3'"
> > + @echo
> > "******************************************************************
> > **********"
> > + @echo
> > + @echo
> > + @exit 1
> > +endif
> > +
> > +$(STATEDIR)/barebox-rpi3.prepare: $(BAREBOX_RPI3_CONFIG)
> > + @$(call targetinfo)
> > + @rm -f "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
> > + @ln -s "$(call ptx/in-platformconfigdir, barebox-rpi3-
> > defaultenv)" \
> > + "$(BAREBOX_RPI3_DIR)/.ptxdist-defaultenv"
> > + @$(call world/prepare, BAREBOX_RPI3)
> > + @$(call touch)
> > +
> > +# ----------------------------------------------------------------
> > ------------
> > +# Install
> > +# ----------------------------------------------------------------
> > ------------
> > +
> > +$(STATEDIR)/barebox-rpi3.install:
> > + @$(call targetinfo)
> > + @$(call touch)
> > +
> > +# ----------------------------------------------------------------
> > ------------
> > +# Targetinstall
> > +# ----------------------------------------------------------------
> > ------------
> > +
> > +$(STATEDIR)/barebox-rpi3.targetinstall:
> > + @$(call targetinfo)
> > + @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
> > + install -m 644 \
> > + $(image) $(IMAGEDIR)/$(notdir $(image))-
> > rpi3;)
> > + @$(call touch)
> > +
> > +# ----------------------------------------------------------------
> > ------------
> > +# Clean
> > +# ----------------------------------------------------------------
> > ------------
> > +
> > +$(STATEDIR)/barebox-rpi3.clean:
> > + @$(call targetinfo)
> > + @$(call clean_pkg, BAREBOX_RPI3)
> > + @$(foreach image, $(BAREBOX_RPI3_IMAGES), \
> > + rm -fv $(IMAGEDIR)/$(notdir $(image));)
> > +
> > +# ----------------------------------------------------------------
> > ------------
> > +# oldconfig / menuconfig
> > +# ----------------------------------------------------------------
> > ------------
> > +
> > +barebox-rpi3_oldconfig barebox-rpi3_menuconfig barebox-
> > rpi3_nconfig: $(STATEDIR)/barebox-rpi3.extract
> > + @$(call world/kconfig, BAREBOX_RPI3, $(subst barebox-
> > rpi3_,,$@))
> > +
> > +# vim: syntax=make
> > diff --git a/configs/platform-v7a/rules/barebox-vexpress.make
> > b/configs/platform-v7a/rules/barebox-vexpress.make
> > index 0266cbe..f69b6c5 100644
> > --- a/configs/platform-v7a/rules/barebox-vexpress.make
> > +++ b/configs/platform-v7a/rules/barebox-vexpress.make
> > @@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_VEXPRESS) += barebox-
> > vexpress
> > #
> > # Paths and names
> > #
> > -BAREBOX_VEXPRESS_VERSION := 2018.05.0
> > -BAREBOX_VEXPRESS_MD5 :=
> > 8286a8ea2cdd88104e5c6762d93d81db
> > +BAREBOX_VEXPRESS_VERSION := 2018.11.0
> > +BAREBOX_VEXPRESS_MD5 :=
> > 1472eae302647d1cf7f1c561a6380b43
> > BAREBOX_VEXPRESS := barebox-
> > $(BAREBOX_VEXPRESS_VERSION)
> > BAREBOX_VEXPRESS_SUFFIX := tar.bz2
> > BAREBOX_VEXPRESS_DIR := $(BUILDDIR)/barebox-
> > vexpress-$(BAREBOX_VEXPRESS_VERSION)
> > --
> > 2.19.1
> >
> >
> > _______________________________________________
> > DistroKit mailing list
> > DistroKit@pengutronix.de
>
>
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* [DistroKit] [PATCH v2] plaform-v7a: barebox v2018.05.0 → v2018.11.0
2018-12-05 7:55 [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0 Rouven Czerwinski
2018-12-05 13:15 ` Roland Hieber
@ 2018-12-06 14:39 ` Rouven Czerwinski
2018-12-06 21:04 ` Alexander Dahl
1 sibling, 1 reply; 7+ messages in thread
From: Rouven Czerwinski @ 2018-12-06 14:39 UTC (permalink / raw)
To: distrokit; +Cc: Rouven Czerwinski
Drop the beaglebone patch, it will be resurrected in a barebox-deployment
layer.
We also add the patch series for the rpi3 to barebox, they can be dropped
in the next release.
Raspberry Pi 3 support is enabled in the patch series which also adds the rpi3
images.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
---
.../platform-v7a/barebox-am335x-mlo.config | 22 +-
configs/platform-v7a/barebox-am335x.config | 24 +-
configs/platform-v7a/barebox-mx6.config | 32 +-
configs/platform-v7a/barebox-rpi2.config | 23 +-
configs/platform-v7a/barebox-vexpress.config | 23 +-
...ne-add-state-entry-for-mmc0-and-mmc1.patch | 35 --
...ease-pengutronix-multi_v7-20180515-1.patch | 22 --
.../patches/barebox-2018.05.0/series | 15 -
...ort-opcode-helpers-from-Linux-kernel.patch | 299 ++++++++++++++++++
...tch-from-HYP-to-SVC-mode-if-required.patch | 88 ++++++
...-monitor-code-to-be-built-without-PS.patch | 37 +++
...-add-file-for-HYP-mode-related-setup.patch | 193 +++++++++++
...-install-secure-monitor-when-entered.patch | 30 ++
...tarting-kernel-in-HYP-mode-when-ente.patch | 31 ++
...HYP-vectors-at-PBL-and-Barebox-entry.patch | 105 ++++++
...sion-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch | 41 +++
...9-ARM-rpi-add-raspberry-pi-3-support.patch | 141 +++++++++
.../0010-ARM-rpi-autosize-malloc-area.patch | 25 ++
...RM-imx-add-support-for-Udoo-Neo-full.patch | 26 +-
...lease-pengutronix_multiv7-20181122-1.patch | 22 ++
.../patches/barebox-2018.11.0/series | 24 ++
configs/platform-v7a/platformconfig | 2 +
.../rules/barebox-am335x-mlo.make | 4 +-
.../platform-v7a/rules/barebox-am335x.make | 4 +-
configs/platform-v7a/rules/barebox-mx6.make | 4 +-
configs/platform-v7a/rules/barebox-rpi2.make | 4 +-
.../platform-v7a/rules/barebox-vexpress.make | 4 +-
27 files changed, 1177 insertions(+), 103 deletions(-)
delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
delete mode 100644 configs/platform-v7a/patches/barebox-2018.05.0/series
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
rename configs/platform-v7a/patches/{barebox-2018.05.0 => barebox-2018.11.0}/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch (93%)
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
create mode 100644 configs/platform-v7a/patches/barebox-2018.11.0/series
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index 6cebecd..7ccc487 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -185,6 +185,7 @@ CONFIG_OF_GPIO=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
@@ -337,6 +338,15 @@ CONFIG_BUS_OMAP_GPMC=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
# CONFIG_FS_CRAMFS is not set
# CONFIG_FS_EXT4 is not set
CONFIG_FS_RAMFS=y
@@ -398,3 +408,13 @@ CONFIG_XYMODEM=y
CONFIG_CRC16=y
# CONFIG_DIGEST is not set
# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 0c78012..66ef277 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -408,6 +408,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
@@ -436,6 +437,7 @@ CONFIG_DRIVER_NET_CPSW=y
#
# CONFIG_AR8327N_PHY is not set
# CONFIG_AT803X_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -587,6 +589,7 @@ CONFIG_LED_GPIO_OF=y
# CONFIG_LED_GPIO_RGB is not set
# CONFIG_LED_GPIO_BICOLOR is not set
CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
#
# EEPROM support
@@ -649,6 +652,15 @@ CONFIG_BUS_OMAP_GPMC=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -732,3 +744,13 @@ CONFIG_DIGEST_HMAC_GENERIC=y
# CONFIG_DIGEST_SHA256_ARM is not set
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_KEYSTORE=y
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 980b97b..536cbfe 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -94,13 +94,17 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_VARISCITE_MX6 is not set
# CONFIG_MACH_GW_VENTANA is not set
# CONFIG_MACH_CM_FX6 is not set
+# CONFIG_MACH_ADVANTECH_ROM_742X is not set
# CONFIG_MACH_WARP7 is not set
# CONFIG_MACH_VF610_TWR is not set
+# CONFIG_MACH_ZII_RDU1 is not set
# CONFIG_MACH_ZII_RDU2 is not set
# CONFIG_MACH_ZII_VF610_DEV is not set
+# CONFIG_MACH_ZII_IMX7D_RPU2 is not set
# CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
# CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
# CONFIG_MACH_NXP_IMX6ULL_EVK is not set
+# CONFIG_MACH_NXP_IMX8MQ_EVK is not set
#
# Board specific settings
@@ -111,10 +115,7 @@ CONFIG_MACH_UDOO_NEO=y
#
CONFIG_IMX_IIM=y
CONFIG_IMX_IIM_FUSE_BLOW=y
-CONFIG_IMX_OCOTP=y
-# CONFIG_IMX_OCOTP_WRITE is not set
# CONFIG_HABV4 is not set
-# CONFIG_ARCH_IMX_USBLOADER is not set
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
@@ -464,6 +465,7 @@ CONFIG_OF_BAREBOX_DRIVERS=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_DRIVER_SERIAL_IMX=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -493,6 +495,7 @@ CONFIG_DRIVER_NET_FEC_IMX=y
#
# CONFIG_AR8327N_PHY is not set
CONFIG_AT803X_PHY=y
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
@@ -681,6 +684,7 @@ CONFIG_LED_GPIO_OF=y
# CONFIG_LED_GPIO_RGB is not set
# CONFIG_LED_GPIO_BICOLOR is not set
CONFIG_LED_TRIGGERS=y
+# CONFIG_LED_PCA955X is not set
#
# EEPROM support
@@ -762,6 +766,15 @@ CONFIG_USB_NOP_XCEIV=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -854,3 +867,14 @@ CONFIG_DIGEST_HMAC_GENERIC=y
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set
CONFIG_CRYPTO_KEYSTORE=y
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
+# CONFIG_ARCH_IMX_USBLOADER is not set
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 74c52e9..0e2622f 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0-20181122-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -54,6 +54,7 @@ CONFIG_MACH_RPI_COMMON=y
#
# CONFIG_MACH_RPI is not set
CONFIG_MACH_RPI2=y
+# CONFIG_MACH_RPI3 is not set
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
@@ -369,6 +370,7 @@ CONFIG_ARM_AMBA=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_SERIAL_AMBA_PL011=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -499,6 +501,15 @@ CONFIG_REGULATOR_BCM283X=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -575,3 +586,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set
# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 826d222..add107b 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2018.05.0-20180515-1 Configuration
+# Barebox/arm 2018.11.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -364,6 +364,7 @@ CONFIG_ARM_AMBA=y
#
# serial drivers
#
+# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
CONFIG_SERIAL_AMBA_PL011=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
@@ -389,6 +390,7 @@ CONFIG_DRIVER_NET_SMC911X=y
#
# CONFIG_AR8327N_PHY is not set
# CONFIG_AT803X_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -522,6 +524,15 @@ CONFIG_STATE_DRV=y
# Filesystem support
#
CONFIG_FS=y
+CONFIG_FS_LEGACY=y
+
+#
+# Some selected filesystems still use the legacy FS API.
+#
+
+#
+# Consider updating them.
+#
CONFIG_FS_AUTOMOUNT=y
# CONFIG_FS_CRAMFS is not set
CONFIG_FS_EXT4=y
@@ -599,3 +610,13 @@ CONFIG_DIGEST_MD5_GENERIC=y
# CONFIG_DIGEST_SHA1_ARM is not set
# CONFIG_DIGEST_SHA256_ARM is not set
# CONFIG_CRYPTO_KEYSTORE is not set
+
+#
+# Firmware files
+#
+CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+
+#
+# Host Tools
+#
+# CONFIG_COMPILE_HOST_TOOLS is not set
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
deleted file mode 100644
index cfca106..0000000
--- a/configs/platform-v7a/patches/barebox-2018.05.0/0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Michael Grzeschik <m.grzeschik@pengutronix.de>
-Date: Fri, 10 Jun 2016 14:02:30 +0200
-Subject: [PATCH] beaglebone: add state entry for mmc0 and mmc1
-
-Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
----
- arch/arm/dts/am335x-bone-common.dtsi | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
-diff --git a/arch/arm/dts/am335x-bone-common.dtsi b/arch/arm/dts/am335x-bone-common.dtsi
-index 0413724e0ca1..6e58714516fd 100644
---- a/arch/arm/dts/am335x-bone-common.dtsi
-+++ b/arch/arm/dts/am335x-bone-common.dtsi
-@@ -11,6 +11,21 @@
- linux,stdout-path = &uart0;
- };
-
-+ bootstate: bootstate {
-+ compatible = "barebox,bootstate";
-+ backend-type = "nv";
-+
-+ system0 {
-+ default_attempts = <3>;
-+ boot = "mmc0";
-+ };
-+
-+ system1 {
-+ default_attempts = <3>;
-+ boot = "mmc1";
-+ };
-+ };
-+
- cpus {
- cpu@0 {
- cpu0-supply = <&dcdc2_reg>;
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch b/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
deleted file mode 100644
index 4b0c22d..0000000
--- a/configs/platform-v7a/patches/barebox-2018.05.0/0201-Release-pengutronix-multi_v7-20180515-1.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Roland Hieber <r.hieber@pengutronix.de>
-Date: Tue, 15 May 2018 23:44:48 +0200
-Subject: [PATCH] Release pengutronix/multi_v7/20180515-1
-
-Signed-off-by: Roland Hieber <r.hieber@pengutronix.de>
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 88c19917394f..11e79cc339f4 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,7 +1,7 @@
- VERSION = 2018
- PATCHLEVEL = 05
- SUBLEVEL = 0
--EXTRAVERSION =
-+EXTRAVERSION =-20180515-1
- NAME = None
-
- # *DOCUMENTATION*
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/series b/configs/platform-v7a/patches/barebox-2018.05.0/series
deleted file mode 100644
index 272791c..0000000
--- a/configs/platform-v7a/patches/barebox-2018.05.0/series
+++ /dev/null
@@ -1,15 +0,0 @@
-# umpf-base: v2018.05.0
-# umpf-name: pengutronix/multi_v7
-# umpf-version: pengutronix/multi_v7/20180515-1
-# umpf-topic: v2018.05.0/customers/pengutronix/beaglebone
-# umpf-hashinfo: d1f50bff60c7069caad2df4ef02f672be456f141
-# umpf-topic-range: cd4320e3e86bd2ab7b4a19016ef8df6c5d69a5a5..d1f50bff60c7069caad2df4ef02f672be456f141
-0001-beaglebone-add-state-entry-for-mmc0-and-mmc1.patch
-# umpf-topic: v2018.05.0/customers/pengutronix/udoo-neo
-# umpf-hashinfo: 772e5039c9a147256a085c76a74cf5cb5c14ec35
-# umpf-topic-range: d1f50bff60c7069caad2df4ef02f672be456f141..183d8e8d0ccf827481923b3872144e2c10ef9fac
-0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
-# umpf-release: pengutronix/multi_v7/20180515-1
-# umpf-topic-range: 183d8e8d0ccf827481923b3872144e2c10ef9fac..734e18abc455f563837dd6ad0df6fb9378053b00
-0201-Release-pengutronix-multi_v7-20180515-1.patch
-# umpf-end
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
new file mode 100644
index 0000000..bd459d0
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
@@ -0,0 +1,299 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:37 +0100
+Subject: [PATCH] ARM: import opcode helpers from Linux kernel
+
+Those are needed to generate some of the ARM SEC and VIRT
+opcodes in a portable way.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/include/asm/opcodes-virt.h | 39 +++++
+ arch/arm/include/asm/opcodes.h | 231 ++++++++++++++++++++++++++++
+ 2 files changed, 270 insertions(+)
+ create mode 100644 arch/arm/include/asm/opcodes-virt.h
+ create mode 100644 arch/arm/include/asm/opcodes.h
+
+diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h
+new file mode 100644
+index 000000000000..efcfdf92d9d5
+--- /dev/null
++++ b/arch/arm/include/asm/opcodes-virt.h
+@@ -0,0 +1,39 @@
++/*
++ * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions
++ * Copyright (C) 2012 Linaro Limited
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published by
++ * the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License along
++ * with this program; if not, write to the Free Software Foundation, Inc.,
++ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
++ */
++#ifndef __ASM_ARM_OPCODES_VIRT_H
++#define __ASM_ARM_OPCODES_VIRT_H
++
++#include <asm/opcodes.h>
++
++#define __HVC(imm16) __inst_arm_thumb32( \
++ 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \
++ 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \
++)
++
++#define __ERET __inst_arm_thumb32( \
++ 0xE160006E, \
++ 0xF3DE8F00 \
++)
++
++#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \
++ 0xE12EF300 | regnum, \
++ 0xF3808E30 | (regnum << 16) \
++)
++
++#endif /* ! __ASM_ARM_OPCODES_VIRT_H */
+diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h
+new file mode 100644
+index 000000000000..a78bf5d2c518
+--- /dev/null
++++ b/arch/arm/include/asm/opcodes.h
+@@ -0,0 +1,231 @@
++/*
++ * arch/arm/include/asm/opcodes.h
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++
++#ifndef __ASM_ARM_OPCODES_H
++#define __ASM_ARM_OPCODES_H
++
++#ifndef __ASSEMBLY__
++#include <linux/linkage.h>
++extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr);
++#endif
++
++#define ARM_OPCODE_CONDTEST_FAIL 0
++#define ARM_OPCODE_CONDTEST_PASS 1
++#define ARM_OPCODE_CONDTEST_UNCOND 2
++
++
++/*
++ * Assembler opcode byteswap helpers.
++ * These are only intended for use by this header: don't use them directly,
++ * because they will be suboptimal in most cases.
++ */
++#define ___asm_opcode_swab32(x) ( \
++ (((x) << 24) & 0xFF000000) \
++ | (((x) << 8) & 0x00FF0000) \
++ | (((x) >> 8) & 0x0000FF00) \
++ | (((x) >> 24) & 0x000000FF) \
++)
++#define ___asm_opcode_swab16(x) ( \
++ (((x) << 8) & 0xFF00) \
++ | (((x) >> 8) & 0x00FF) \
++)
++#define ___asm_opcode_swahb32(x) ( \
++ (((x) << 8) & 0xFF00FF00) \
++ | (((x) >> 8) & 0x00FF00FF) \
++)
++#define ___asm_opcode_swahw32(x) ( \
++ (((x) << 16) & 0xFFFF0000) \
++ | (((x) >> 16) & 0x0000FFFF) \
++)
++#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF)
++#define ___asm_opcode_identity16(x) ((x) & 0xFFFF)
++
++
++/*
++ * Opcode byteswap helpers
++ *
++ * These macros help with converting instructions between a canonical integer
++ * format and in-memory representation, in an endianness-agnostic manner.
++ *
++ * __mem_to_opcode_*() convert from in-memory representation to canonical form.
++ * __opcode_to_mem_*() convert from canonical form to in-memory representation.
++ *
++ *
++ * Canonical instruction representation:
++ *
++ * ARM: 0xKKLLMMNN
++ * Thumb 16-bit: 0x0000KKLL, where KK < 0xE8
++ * Thumb 32-bit: 0xKKLLMMNN, where KK >= 0xE8
++ *
++ * There is no way to distinguish an ARM instruction in canonical representation
++ * from a Thumb instruction (just as these cannot be distinguished in memory).
++ * Where this distinction is important, it needs to be tracked separately.
++ *
++ * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not
++ * represent any valid Thumb-2 instruction. For this range,
++ * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false.
++ *
++ * The ___asm variants are intended only for use by this header, in situations
++ * involving inline assembler. For .S files, the normal __opcode_*() macros
++ * should do the right thing.
++ */
++#ifdef __ASSEMBLY__
++
++#define ___opcode_swab32(x) ___asm_opcode_swab32(x)
++#define ___opcode_swab16(x) ___asm_opcode_swab16(x)
++#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x)
++#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x)
++#define ___opcode_identity32(x) ___asm_opcode_identity32(x)
++#define ___opcode_identity16(x) ___asm_opcode_identity16(x)
++
++#else /* ! __ASSEMBLY__ */
++
++#include <linux/types.h>
++#include <linux/swab.h>
++
++#define ___opcode_swab32(x) swab32(x)
++#define ___opcode_swab16(x) swab16(x)
++#define ___opcode_swahb32(x) swahb32(x)
++#define ___opcode_swahw32(x) swahw32(x)
++#define ___opcode_identity32(x) ((u32)(x))
++#define ___opcode_identity16(x) ((u16)(x))
++
++#endif /* ! __ASSEMBLY__ */
++
++
++#ifdef CONFIG_CPU_ENDIAN_BE8
++
++#define __opcode_to_mem_arm(x) ___opcode_swab32(x)
++#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x)
++#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x)
++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x)
++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x)
++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x)
++
++#else /* ! CONFIG_CPU_ENDIAN_BE8 */
++
++#define __opcode_to_mem_arm(x) ___opcode_identity32(x)
++#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x)
++#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x)
++#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x)
++#ifndef CONFIG_CPU_ENDIAN_BE32
++/*
++ * On BE32 systems, using 32-bit accesses to store Thumb instructions will not
++ * work in all cases, due to alignment constraints. For now, a correct
++ * version is not provided for BE32.
++ */
++#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x)
++#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x)
++#endif
++
++#endif /* ! CONFIG_CPU_ENDIAN_BE8 */
++
++#define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x)
++#define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x)
++#ifndef CONFIG_CPU_ENDIAN_BE32
++#define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x)
++#endif
++
++/* Operations specific to Thumb opcodes */
++
++/* Instruction size checks: */
++#define __opcode_is_thumb32(x) ( \
++ ((x) & 0xF8000000) == 0xE8000000 \
++ || ((x) & 0xF0000000) == 0xF0000000 \
++)
++#define __opcode_is_thumb16(x) ( \
++ ((x) & 0xFFFF0000) == 0 \
++ && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \
++)
++
++/* Operations to construct or split 32-bit Thumb instructions: */
++#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16))
++#define __opcode_thumb32_second(x) (___opcode_identity16(x))
++#define __opcode_thumb32_compose(first, second) ( \
++ (___opcode_identity32(___opcode_identity16(first)) << 16) \
++ | ___opcode_identity32(___opcode_identity16(second)) \
++)
++#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16))
++#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x))
++#define ___asm_opcode_thumb32_compose(first, second) ( \
++ (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \
++ | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \
++)
++
++/*
++ * Opcode injection helpers
++ *
++ * In rare cases it is necessary to assemble an opcode which the
++ * assembler does not support directly, or which would normally be
++ * rejected because of the CFLAGS or AFLAGS used to build the affected
++ * file.
++ *
++ * Before using these macros, consider carefully whether it is feasible
++ * instead to change the build flags for your file, or whether it really
++ * makes sense to support old assembler versions when building that
++ * particular kernel feature.
++ *
++ * The macros defined here should only be used where there is no viable
++ * alternative.
++ *
++ *
++ * __inst_arm(x): emit the specified ARM opcode
++ * __inst_thumb16(x): emit the specified 16-bit Thumb opcode
++ * __inst_thumb32(x): emit the specified 32-bit Thumb opcode
++ *
++ * __inst_arm_thumb16(arm, thumb): emit either the specified arm or
++ * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2
++ * kernel is being built
++ *
++ * __inst_arm_thumb32(arm, thumb): emit either the specified arm or
++ * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2
++ * kernel is being built
++ *
++ *
++ * Note that using these macros directly is poor practice. Instead, you
++ * should use them to define human-readable wrapper macros to encode the
++ * instructions that you care about. In code which might run on ARMv7 or
++ * above, you can usually use the __inst_arm_thumb{16,32} macros to
++ * specify the ARM and Thumb alternatives at the same time. This ensures
++ * that the correct opcode gets emitted depending on the instruction set
++ * used for the kernel build.
++ *
++ * Look at opcodes-virt.h for an example of how to use these macros.
++ */
++#include <linux/stringify.h>
++
++#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x))
++#define __inst_thumb32(x) ___inst_thumb32( \
++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \
++ ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \
++)
++#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x))
++
++#ifdef CONFIG_THUMB2_BAREBOX
++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \
++ __inst_thumb16(thumb_opcode)
++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \
++ __inst_thumb32(thumb_opcode)
++#else
++#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
++#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode)
++#endif
++
++/* Helpers for the helpers. Don't use these directly. */
++#ifdef __ASSEMBLY__
++#define ___inst_arm(x) .long x
++#define ___inst_thumb16(x) .short x
++#define ___inst_thumb32(first, second) .short first, second
++#else
++#define ___inst_arm(x) ".long " __stringify(x) "\n\t"
++#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t"
++#define ___inst_thumb32(first, second) \
++ ".short " __stringify(first) ", " __stringify(second) "\n\t"
++#endif
++
++#endif /* __ASM_ARM_OPCODES_H */
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
new file mode 100644
index 0000000..fcd116a
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
@@ -0,0 +1,88 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:38 +0100
+Subject: [PATCH] ARM: safely switch from HYP to SVC mode if required
+
+This is a port of the Linux safe_svcmode_maskall macro to
+the Barebox lowlevel init.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/lowlevel.S | 18 +++++++++++++++---
+ arch/arm/include/asm/system.h | 26 ++++++++++++++++++++++++++
+ 2 files changed, 41 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
+index 7696a198e764..43665981e48b 100644
+--- a/arch/arm/cpu/lowlevel.S
++++ b/arch/arm/cpu/lowlevel.S
+@@ -1,16 +1,28 @@
+ #include <linux/linkage.h>
+ #include <init.h>
+ #include <asm/system.h>
++#include <asm/opcodes-virt.h>
+
+ .section ".text_bare_init_","ax"
+ ENTRY(arm_cpu_lowlevel_init)
+ /* save lr, since it may be banked away with a processor mode change */
+ mov r2, lr
++
+ /* set the cpu to SVC32 mode, mask irq and fiq */
+ mrs r12, cpsr
+- bic r12, r12, #0x1f
+- orr r12, r12, #0xd3
+- msr cpsr, r12
++ eor r12, r12, #HYP_MODE
++ tst r12, #MODE_MASK
++ bic r12, r12, #MODE_MASK
++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
++THUMB( orr r12, r12, #PSR_T_BIT )
++ bne 1f
++ orr r12, r12, #PSR_A_BIT
++ adr lr, 2f
++ msr spsr_cxsf, r12
++ __MSR_ELR_HYP(14)
++ __ERET
++1: msr cpsr_c, r12
++2:
+
+ #if __LINUX_ARM_ARCH__ >= 6
+ /*
+diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
+index 5cf828ea36cb..48242ab473f4 100644
+--- a/arch/arm/include/asm/system.h
++++ b/arch/arm/include/asm/system.h
+@@ -60,6 +60,32 @@
+ #define CR_AFE (1 << 29) /* Access flag enable */
+ #define CR_TE (1 << 30) /* Thumb exception enable */
+
++/*
++ * PSR bits
++ */
++#define USR_MODE 0x00000010
++#define FIQ_MODE 0x00000011
++#define IRQ_MODE 0x00000012
++#define SVC_MODE 0x00000013
++#define ABT_MODE 0x00000017
++#define HYP_MODE 0x0000001a
++#define UND_MODE 0x0000001b
++#define SYSTEM_MODE 0x0000001f
++#define MODE32_BIT 0x00000010
++#define MODE_MASK 0x0000001f
++
++#define PSR_T_BIT 0x00000020
++#define PSR_F_BIT 0x00000040
++#define PSR_I_BIT 0x00000080
++#define PSR_A_BIT 0x00000100
++#define PSR_E_BIT 0x00000200
++#define PSR_J_BIT 0x01000000
++#define PSR_Q_BIT 0x08000000
++#define PSR_V_BIT 0x10000000
++#define PSR_C_BIT 0x20000000
++#define PSR_Z_BIT 0x40000000
++#define PSR_N_BIT 0x80000000
++
+ #ifndef __ASSEMBLY__
+ #if __LINUX_ARM_ARCH__ >= 7
+ static inline unsigned int current_el(void)
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
new file mode 100644
index 0000000..eed9e52
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
@@ -0,0 +1,37 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:39 +0100
+Subject: [PATCH] ARM: allow secure monitor code to be built without PSCI
+
+The hyp mode handling added in the secure monitor code is also useful
+when Barebox doesn't have PSCI control. Allow to build without PSCI.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/sm_as.S | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
+index 09580e75de5f..0d01e1bf2435 100644
+--- a/arch/arm/cpu/sm_as.S
++++ b/arch/arm/cpu/sm_as.S
+@@ -129,7 +129,9 @@ secure_monitor:
+ sub sp, sp, #4*4 @ allocate result structure on stack
+ mov r12, sp
+ push {r4-r6, r12}
++#ifdef CONFIG_ARM_PSCI
+ bl psci_entry
++#endif
+ pop {r4-r6, r12}
+ ldm r12, {r0-r3}
+ add sp, sp, #4*4
+@@ -163,6 +165,8 @@ ENTRY(psci_cpu_entry)
+ mcr p15, 0, r0, c1, c0, 1 @ ACTLR
+
+ bl secure_monitor_stack_setup
++#ifdef CONFIG_ARM_PSCI
+ bl psci_cpu_entry_c
++#endif
+
+ ENDPROC(psci_cpu_entry)
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
new file mode 100644
index 0000000..8047922
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0004-ARM-add-file-for-HYP-mode-related-setup.patch
@@ -0,0 +1,193 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:40 +0100
+Subject: [PATCH] ARM: add file for HYP mode related setup
+
+This adds routines to add hyp mode vectors and switch back to HYP
+mode from SVC. This is needed in both the PBL and Barebox proper.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/Makefile | 3 +
+ arch/arm/cpu/hyp.S | 116 ++++++++++++++++++++++++++++++++++
+ arch/arm/cpu/sm_as.S | 11 ----
+ arch/arm/include/asm/secure.h | 3 +
+ 4 files changed, 122 insertions(+), 11 deletions(-)
+ create mode 100644 arch/arm/cpu/hyp.S
+
+diff --git a/arch/arm/cpu/Makefile b/arch/arm/cpu/Makefile
+index 874d723e2cee..0a403bc981c5 100644
+--- a/arch/arm/cpu/Makefile
++++ b/arch/arm/cpu/Makefile
+@@ -4,6 +4,9 @@ obj-$(CONFIG_ARM_EXCEPTIONS) += exceptions$(S64).o interrupts$(S64).o
+ obj-$(CONFIG_MMU) += mmu$(S64).o
+ lwl-y += lowlevel$(S64).o
+ obj-pbl-$(CONFIG_MMU) += mmu-early$(S64).o
++obj-pbl-$(CONFIG_CPU_32v7) += hyp.o
++AFLAGS_hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
++AFLAGS_pbl-hyp.o :=-Wa,-march=armv7-a -Wa,-mcpu=all
+
+ obj-y += start.o entry.o
+
+diff --git a/arch/arm/cpu/hyp.S b/arch/arm/cpu/hyp.S
+new file mode 100644
+index 000000000000..1314b56eab25
+--- /dev/null
++++ b/arch/arm/cpu/hyp.S
+@@ -0,0 +1,116 @@
++#include <linux/linkage.h>
++#include <asm/system.h>
++#include <asm/opcodes-virt.h>
++#include <init.h>
++
++.arch_extension sec
++.arch_extension virt
++
++__BARE_INIT
++
++.data
++ .align 2
++ENTRY(__boot_cpu_mode)
++ .long 0
++.text
++
++ENTRY(__hyp_install)
++ mrs r12, cpsr
++ and r12, r12, #MODE_MASK
++
++ @ Save the initial CPU state
++ adr r0, .L__boot_cpu_mode_offset
++ ldr r1, [r0]
++ str r12, [r0, r1]
++
++ cmp r12, #HYP_MODE
++ movne pc, lr @ give up if the CPU is not in HYP mode
++
++ @ Now install the hypervisor stub:
++ adr r12, __hyp_vectors
++ mcr p15, 4, r12, c12, c0, 0 @ set hypervisor vector base (HVBAR)
++
++ @ Disable all traps, so we don't get any nasty surprise
++ mov r12, #0
++ mcr p15, 4, r12, c1, c1, 0 @ HCR
++ mcr p15, 4, r12, c1, c1, 2 @ HCPTR
++ mcr p15, 4, r12, c1, c1, 3 @ HSTR
++
++THUMB( orr r12, #(1 << 30) ) @ HSCTLR.TE
++ mcr p15, 4, r12, c1, c0, 0 @ HSCTLR
++
++ mrc p15, 4, r12, c1, c1, 1 @ HDCR
++ and r12, #0x1f @ Preserve HPMN
++ mcr p15, 4, r12, c1, c1, 1 @ HDCR
++
++ @ Make sure NS-SVC is initialised appropriately
++ mrc p15, 0, r12, c1, c0, 0 @ SCTLR
++ orr r12, #(1 << 5) @ CP15 barriers enabled
++ bic r12, #(3 << 7) @ Clear SED/ITD for v8 (RES0 for v7)
++ bic r12, #(3 << 19) @ WXN and UWXN disabled
++ mcr p15, 0, r12, c1, c0, 0 @ SCTLR
++
++ mrc p15, 0, r12, c0, c0, 0 @ MIDR
++ mcr p15, 4, r12, c0, c0, 0 @ VPIDR
++
++ mrc p15, 0, r12, c0, c0, 5 @ MPIDR
++ mcr p15, 4, r12, c0, c0, 5 @ VMPIDR
++ bx lr
++ENDPROC(__hyp_install)
++
++ENTRY(armv7_hyp_install)
++ mov r2, lr
++
++ bl __hyp_install
++
++ /* set the cpu to SVC32 mode, mask irq and fiq */
++ mrs r12, cpsr
++ eor r12, r12, #HYP_MODE
++ tst r12, #MODE_MASK
++ bic r12, r12, #MODE_MASK
++ orr r12, r12, #(PSR_I_BIT | PSR_F_BIT | SVC_MODE)
++THUMB( orr r12, r12, #PSR_T_BIT )
++ bne 1f
++ orr r12, r12, #PSR_A_BIT
++ adr lr, 2f
++ msr spsr_cxsf, r12
++ __MSR_ELR_HYP(14)
++ __ERET
++1: msr cpsr_c, r12
++2:
++ mov pc, r2
++ENDPROC(armv7_hyp_install)
++
++ENTRY(armv7_switch_to_hyp)
++ mov r0, lr
++ mov r1, sp @ save SVC copy of LR and SP
++ isb
++ hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
++ mov sp, r1
++ mov lr, r0 @ restore SVC copy of LR and SP
++
++ bx lr
++ENDPROC(armv7_switch_to_hyp)
++
++.align 2
++.L__boot_cpu_mode_offset:
++ .long __boot_cpu_mode - .
++
++/* The HYP trap is crafted to match armv7_switch_to_hyp() */
++__hyp_do_trap:
++ mov lr, r0
++ mov sp, r1
++ bx lr
++ENDPROC(__hyp_do_trap)
++
++.align 5
++__hyp_vectors:
++__hyp_reset: W(b) .
++__hyp_und: W(b) .
++__hyp_svc: W(b) .
++__hyp_pabort: W(b) .
++__hyp_dabort: W(b) .
++__hyp_trap: W(b) __hyp_do_trap
++__hyp_irq: W(b) .
++__hyp_fiq: W(b) .
++ENDPROC(__hyp_vectors)
+diff --git a/arch/arm/cpu/sm_as.S b/arch/arm/cpu/sm_as.S
+index 0d01e1bf2435..de6cd0406f4f 100644
+--- a/arch/arm/cpu/sm_as.S
++++ b/arch/arm/cpu/sm_as.S
+@@ -148,17 +148,6 @@ hyp_trap:
+ mov pc, lr @ do no switch modes, but
+ @ return to caller
+
+-ENTRY(armv7_switch_to_hyp)
+- mov r0, lr
+- mov r1, sp @ save SVC copy of LR and SP
+- isb
+- hvc #0 @ for older asm: .byte 0x70, 0x00, 0x40, 0xe1
+- mov sp, r1
+- mov lr, r0 @ restore SVC copy of LR and SP
+-
+- bx lr
+-ENDPROC(armv7_switch_to_hyp)
+-
+ ENTRY(psci_cpu_entry)
+ mrc p15, 0, r0, c1, c0, 1 @ ACTLR
+ orr r0, r0, #(1 << 6) @ Set SMP bit
+diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h
+index a4cb1f6c1c44..663d81ea27dd 100644
+--- a/arch/arm/include/asm/secure.h
++++ b/arch/arm/include/asm/secure.h
+@@ -5,9 +5,12 @@
+
+ int armv7_secure_monitor_install(void);
+ int __armv7_secure_monitor_install(void);
++
+ void armv7_switch_to_hyp(void);
++void armv7_hyp_install(void);
+
+ extern unsigned char secure_monitor_init_vectors[];
++extern int __boot_cpu_mode;
+
+ enum arm_security_state {
+ ARM_STATE_SECURE,
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
new file mode 100644
index 0000000..b82de4b
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
@@ -0,0 +1,30 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:41 +0100
+Subject: [PATCH] ARM: don't try to install secure monitor when entered in HYP
+ mode
+
+When Barebox has been entered in HYP mode, the CPU is already switched
+to the non-secure world and it's not possible for Barebox to install
+it's own secure monitor.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/sm.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
+index cb0bac106b5f..1246d8e3a441 100644
+--- a/arch/arm/cpu/sm.c
++++ b/arch/arm/cpu/sm.c
+@@ -184,6 +184,9 @@ int armv7_secure_monitor_install(void)
+ return -EINVAL;
+ }
+
++ if (__boot_cpu_mode == HYP_MODE)
++ return 0;
++
+ mmuon = get_cr() & CR_M;
+
+ vbar = get_vbar();
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
new file mode 100644
index 0000000..1de95c1
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
@@ -0,0 +1,31 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:42 +0100
+Subject: [PATCH] ARM: default to starting kernel in HYP mode when entered in
+ HYP
+
+When Barebox has been entered in HYP mode, there is a high chance that
+the kernel is intended to be started in HYP mode also. Get this
+default into place.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/sm.c | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm/cpu/sm.c b/arch/arm/cpu/sm.c
+index 1246d8e3a441..6fad30adabc9 100644
+--- a/arch/arm/cpu/sm.c
++++ b/arch/arm/cpu/sm.c
+@@ -262,6 +262,9 @@ static int sm_init(void)
+ bootm_secure_state_names,
+ ARRAY_SIZE(bootm_secure_state_names));
+
++ if (__boot_cpu_mode == HYP_MODE)
++ bootm_secure_state = ARM_STATE_HYP;
++
+ return 0;
+ }
+ device_initcall(sm_init);
+\ No newline at end of file
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
new file mode 100644
index 0000000..10615e9
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
@@ -0,0 +1,105 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:43 +0100
+Subject: [PATCH] ARM: install HYP vectors at PBL and Barebox entry
+
+If the CPU was already in HYP mode when entering the PBL, install a
+simple trap handler to allow to get back from SVC to HYP before
+switching to HYP mode.
+
+As the vectors are part of the currently running binary, we need to
+do the same setup when starting the real Barebox binary, as the PBL
+setup vectors might get overwritten. To do this we trap into HYP mode
+just before jumping to Barebox and then re-do the vector setup and
+SVC switch as the first thing in Barebox proper.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/cpu/lowlevel.S | 5 +++++
+ arch/arm/cpu/start-pbl.c | 4 ++++
+ arch/arm/cpu/start.c | 5 +++++
+ arch/arm/cpu/uncompress.c | 4 ++++
+ 4 files changed, 18 insertions(+)
+
+diff --git a/arch/arm/cpu/lowlevel.S b/arch/arm/cpu/lowlevel.S
+index 43665981e48b..3b52644e43e1 100644
+--- a/arch/arm/cpu/lowlevel.S
++++ b/arch/arm/cpu/lowlevel.S
+@@ -8,6 +8,11 @@ ENTRY(arm_cpu_lowlevel_init)
+ /* save lr, since it may be banked away with a processor mode change */
+ mov r2, lr
+
++#ifdef CONFIG_CPU_32v7
++ /* careful: the hyp install corrupts r0 and r1 */
++ bl __hyp_install
++#endif
++
+ /* set the cpu to SVC32 mode, mask irq and fiq */
+ mrs r12, cpsr
+ eor r12, r12, #HYP_MODE
+diff --git a/arch/arm/cpu/start-pbl.c b/arch/arm/cpu/start-pbl.c
+index 16159d7f9d51..48a808645671 100644
+--- a/arch/arm/cpu/start-pbl.c
++++ b/arch/arm/cpu/start-pbl.c
+@@ -26,6 +26,7 @@
+ #include <asm/barebox-arm-head.h>
+ #include <asm-generic/memory_layout.h>
+ #include <asm/sections.h>
++#include <asm/secure.h>
+ #include <asm/cache.h>
+ #include <asm/mmu.h>
+ #include <asm/unaligned.h>
+@@ -98,5 +99,8 @@ __noreturn void barebox_single_pbl_start(unsigned long membase,
+ else
+ barebox = (void *)barebox_base;
+
++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
++ armv7_switch_to_hyp();
++
+ barebox(membase, memsize, boarddata);
+ }
+diff --git a/arch/arm/cpu/start.c b/arch/arm/cpu/start.c
+index 64bd942ad764..a79d64eaa6e6 100644
+--- a/arch/arm/cpu/start.c
++++ b/arch/arm/cpu/start.c
+@@ -24,6 +24,7 @@
+ #include <asm/barebox-arm-head.h>
+ #include <asm-generic/memory_layout.h>
+ #include <asm/sections.h>
++#include <asm/secure.h>
+ #include <asm/unaligned.h>
+ #include <asm/cache.h>
+ #include <asm/mmu.h>
+@@ -147,6 +148,10 @@ __noreturn void barebox_non_pbl_start(unsigned long membase,
+ unsigned long barebox_base = arm_mem_barebox_image(membase,
+ endmem,
+ barebox_size);
++
++ if (IS_ENABLED(CONFIG_CPU_V7))
++ armv7_hyp_install();
++
+ if (IS_ENABLED(CONFIG_RELOCATABLE))
+ relocate_to_adr(barebox_base);
+
+diff --git a/arch/arm/cpu/uncompress.c b/arch/arm/cpu/uncompress.c
+index 43b49b42120b..048bca0c9599 100644
+--- a/arch/arm/cpu/uncompress.c
++++ b/arch/arm/cpu/uncompress.c
+@@ -27,6 +27,7 @@
+ #include <asm/barebox-arm-head.h>
+ #include <asm-generic/memory_layout.h>
+ #include <asm/sections.h>
++#include <asm/secure.h>
+ #include <asm/cache.h>
+ #include <asm/mmu.h>
+ #include <asm/unaligned.h>
+@@ -105,5 +106,8 @@ void __noreturn barebox_multi_pbl_start(unsigned long membase,
+
+ pr_debug("jumping to uncompressed image at 0x%p\n", barebox);
+
++ if (IS_ENABLED(CONFIG_CPU_V7) && __boot_cpu_mode == HYP_MODE)
++ armv7_switch_to_hyp();
++
+ barebox(membase, memsize, boarddata);
+ }
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
new file mode 100644
index 0000000..9aa90b5
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
@@ -0,0 +1,41 @@
+From: Enrico Joerns <ejo@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:44 +0100
+Subject: [PATCH] ARM: rpi: add revision IDs for Pi 3 Model B and Pi Zero
+
+Signed-off-by: Enrico Joerns <ejo@pengutronix.de>
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/boards/raspberry-pi/rpi-common.c | 2 ++
+ arch/arm/mach-bcm283x/include/mach/mbox.h | 4 ++++
+ 2 files changed, 6 insertions(+)
+
+diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
+index 6e375bc984de..3baed6525586 100644
+--- a/arch/arm/boards/raspberry-pi/rpi-common.c
++++ b/arch/arm/boards/raspberry-pi/rpi-common.c
+@@ -174,6 +174,8 @@ const struct rpi_model rpi_models_old_scheme[] = {
+ const struct rpi_model rpi_models_new_scheme[] = {
+ RPI_MODEL(0, "Unknown model", NULL),
+ RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
++ RPI_MODEL(BCM2837_BOARD_REV_3_B, "3 Model B", rpi_b_plus_init),
++ RPI_MODEL(BCM2835_BOARD_REV_ZERO, "Zero", rpi_b_plus_init),
+ };
+
+ static int rpi_board_rev = 0;
+diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
+index 2b5aea88ee0a..0d1ac074e328 100644
+--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
++++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
+@@ -129,6 +129,10 @@ struct bcm2835_mbox_tag_hdr {
+
+ /* RPi 2 */
+ #define BCM2836_BOARD_REV_2_B 0x4
++/* RPi 3 */
++#define BCM2837_BOARD_REV_3_B 0x8
++/* Zero */
++#define BCM2835_BOARD_REV_ZERO 0x9
+
+ /*
+ * 0x2..0xf from:
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
new file mode 100644
index 0000000..8e8d76a
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0009-ARM-rpi-add-raspberry-pi-3-support.patch
@@ -0,0 +1,141 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:45 +0100
+Subject: [PATCH] ARM: rpi: add raspberry pi 3 support
+
+This adds basic support at the same feature level as the other
+supported raspberry pi boards.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/boards/raspberry-pi/lowlevel.c | 14 ++++++++++++--
+ arch/arm/configs/rpi_defconfig | 2 ++
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/bcm2837-rpi-3.dts | 16 ++++++++++++++++
+ arch/arm/mach-bcm283x/Kconfig | 6 ++++++
+ arch/arm/mach-bcm283x/core.c | 1 +
+ images/Makefile.bcm283x | 4 ++++
+ 7 files changed, 42 insertions(+), 2 deletions(-)
+ create mode 100644 arch/arm/dts/bcm2837-rpi-3.dts
+
+diff --git a/arch/arm/boards/raspberry-pi/lowlevel.c b/arch/arm/boards/raspberry-pi/lowlevel.c
+index cbc6caa4b9ed..34c9350920e9 100644
+--- a/arch/arm/boards/raspberry-pi/lowlevel.c
++++ b/arch/arm/boards/raspberry-pi/lowlevel.c
+@@ -1,7 +1,7 @@
++#include <asm/barebox-arm.h>
++#include <asm/cache.h>
+ #include <common.h>
+ #include <linux/sizes.h>
+-#include <asm/barebox-arm.h>
+-#include <asm/barebox-arm-head.h>
+ #include <mach/platform.h>
+
+ extern char __dtb_bcm2835_rpi_start[];
+@@ -23,3 +23,13 @@ ENTRY_FUNCTION(start_raspberry_pi2, r0, r1, r2)
+
+ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
+ }
++
++extern char __dtb_bcm2837_rpi_3_start[];
++ENTRY_FUNCTION(start_raspberry_pi3, r0, r1, r2)
++{
++ void *fdt = __dtb_bcm2837_rpi_3_start + get_runtime_offset();
++
++ arm_cpu_lowlevel_init();
++
++ barebox_arm_entry(BCM2835_SDRAM_BASE, SZ_512M, fdt);
++}
+diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
+index f3aef4290425..cd88b4ac751c 100644
+--- a/arch/arm/configs/rpi_defconfig
++++ b/arch/arm/configs/rpi_defconfig
+@@ -1,9 +1,11 @@
+ CONFIG_ARCH_BCM283X=y
+ CONFIG_MACH_RPI=y
+ CONFIG_MACH_RPI2=y
++CONFIG_MACH_RPI3=y
+ CONFIG_AEABI=y
+ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+ CONFIG_ARM_UNWIND=y
++CONFIG_IMAGE_COMPRESSION_NONE=y
+ CONFIG_MMU=y
+ CONFIG_MALLOC_TLSF=y
+ CONFIG_KALLSYMS=y
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 1caeca35b484..4e063902c635 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -71,6 +71,7 @@ pbl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
+ pbl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
+ pbl-dtb-$(CONFIG_MACH_RPI) += bcm2835-rpi.dtb.o
+ pbl-dtb-$(CONFIG_MACH_RPI2) += bcm2836-rpi-2.dtb.o
++pbl-dtb-$(CONFIG_MACH_RPI3) += bcm2837-rpi-3.dtb.o
+ pbl-dtb-$(CONFIG_MACH_SABRELITE) += imx6q-sabrelite.dtb.o imx6dl-sabrelite.dtb.o
+ pbl-dtb-$(CONFIG_MACH_SABRESD) += imx6q-sabresd.dtb.o
+ pbl-dtb-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB) += imx6sx-sdb.dtb.o
+diff --git a/arch/arm/dts/bcm2837-rpi-3.dts b/arch/arm/dts/bcm2837-rpi-3.dts
+new file mode 100644
+index 000000000000..d6ffc369122c
+--- /dev/null
++++ b/arch/arm/dts/bcm2837-rpi-3.dts
+@@ -0,0 +1,16 @@
++#include <arm64/broadcom/bcm2837-rpi-3-b.dts>
++
++/ {
++ chosen {
++ stdout-path = &uart0;
++ };
++
++ memory {
++ reg = <0x0 0x0>;
++ };
++};
++
++&uart0 {
++ status = "okay";
++ /delete-node/ bluetooth;
++};
+diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
+index 1457f114ccaa..af2f88c47acb 100644
+--- a/arch/arm/mach-bcm283x/Kconfig
++++ b/arch/arm/mach-bcm283x/Kconfig
+@@ -19,6 +19,12 @@ config MACH_RPI2
+ select CPU_V7
+ select MACH_RPI_COMMON
+
++config MACH_RPI3
++ bool "RaspberryPi 3 (BCM2837/CORTEX-A53)"
++ select CPU_V7
++ select MACH_RPI_COMMON
++ select ARM_SECURE_MONITOR
++
+ endmenu
+
+ config MACH_RPI_DEBUG_UART_BASE
+diff --git a/arch/arm/mach-bcm283x/core.c b/arch/arm/mach-bcm283x/core.c
+index fddcb0d1a1d4..26f0996b1cb8 100644
+--- a/arch/arm/mach-bcm283x/core.c
++++ b/arch/arm/mach-bcm283x/core.c
+@@ -41,6 +41,7 @@ static int bcm2835_clk_init(void)
+ clk = clk_fixed("uart0-pl0110", 3 * 1000 * 1000);
+ clk_register_clkdev(clk, NULL, "uart0-pl0110");
+ clk_register_clkdev(clk, NULL, "20201000.serial");
++ clk_register_clkdev(clk, NULL, "3f201000.serial");
+
+ clk = clk_fixed("bcm2835-cs", 1 * 1000 * 1000);
+ clk_register_clkdev(clk, NULL, "bcm2835-cs");
+diff --git a/images/Makefile.bcm283x b/images/Makefile.bcm283x
+index d59ef043f05c..d14e648926ac 100644
+--- a/images/Makefile.bcm283x
++++ b/images/Makefile.bcm283x
+@@ -9,3 +9,7 @@ image-$(CONFIG_MACH_RPI) += barebox-raspberry-pi-1.img
+ pblx-$(CONFIG_MACH_RPI2) += start_raspberry_pi2
+ FILE_barebox-raspberry-pi-2.img = start_raspberry_pi2.pblx
+ image-$(CONFIG_MACH_RPI2) += barebox-raspberry-pi-2.img
++
++pblx-$(CONFIG_MACH_RPI3) += start_raspberry_pi3
++FILE_barebox-raspberry-pi-3.img = start_raspberry_pi3.pblx
++image-$(CONFIG_MACH_RPI3) += barebox-raspberry-pi-3.img
+\ No newline at end of file
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
new file mode 100644
index 0000000..da498ba
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0010-ARM-rpi-autosize-malloc-area.patch
@@ -0,0 +1,25 @@
+From: Lucas Stach <l.stach@pengutronix.de>
+Date: Thu, 1 Nov 2018 10:18:46 +0100
+Subject: [PATCH] ARM: rpi: autosize malloc area
+
+Autosize the malloc area according to the available RAM size.
+
+Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
+Tested-by: Roland Hieber <r.hieber@pengutronix.de>
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+---
+ arch/arm/configs/rpi_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/configs/rpi_defconfig b/arch/arm/configs/rpi_defconfig
+index cd88b4ac751c..2bb615849324 100644
+--- a/arch/arm/configs/rpi_defconfig
++++ b/arch/arm/configs/rpi_defconfig
+@@ -7,6 +7,7 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+ CONFIG_ARM_UNWIND=y
+ CONFIG_IMAGE_COMPRESSION_NONE=y
+ CONFIG_MMU=y
++CONFIG_MALLOC_SIZE=0x0
+ CONFIG_MALLOC_TLSF=y
+ CONFIG_KALLSYMS=y
+ CONFIG_PROMPT="R-Pi> "
diff --git a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
similarity index 93%
rename from configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
rename to configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
index 06c356b..9f99a39 100644
--- a/configs/platform-v7a/patches/barebox-2018.05.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
@@ -26,10 +26,10 @@ Forwarded: id:20170627190317.19253-1-uwe@kleine-koenig.org
create mode 100644 arch/arm/dts/imx6sx-udoo-neo-full.dts
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
-index 30f4c299f1a1..f70fbac8f379 100644
+index c737cf34138c..9aee9bf0993a 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
-@@ -135,6 +135,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
+@@ -137,6 +137,7 @@ obj-$(CONFIG_MACH_TX51) += karo-tx51/
obj-$(CONFIG_MACH_TX53) += karo-tx53/
obj-$(CONFIG_MACH_TX6X) += karo-tx6x/
obj-$(CONFIG_MACH_UDOO) += udoo/
@@ -254,10 +254,10 @@ index 000000000000..e78c2685fd78
+ imx6sx_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index e60e0ea0c6be..b87e27c8c263 100644
+index 4e063902c635..3d34a78f7878 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
-@@ -93,6 +93,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
+@@ -97,6 +97,7 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6dl-tx6u.dtb.o
pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o
pbl-dtb-$(CONFIG_MACH_TURRIS_OMNIA) += armada-385-turris-omnia-bb.dtb.o
pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o
@@ -276,10 +276,10 @@ index 000000000000..9203d40207c5
+/{
+};
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
-index 9052a94ea071..9ec95bb6df09 100644
+index 63a92bd5bd1d..ab515ecf2286 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
-@@ -377,6 +377,10 @@ config MACH_UDOO
+@@ -380,6 +380,10 @@ config MACH_UDOO
bool "Freescale i.MX6 UDOO Board"
select ARCH_IMX6
@@ -291,22 +291,22 @@ index 9052a94ea071..9ec95bb6df09 100644
bool "Variscite i.MX6 Quad SOM"
select ARCH_IMX6
diff --git a/arch/arm/mach-imx/include/mach/esdctl.h b/arch/arm/mach-imx/include/mach/esdctl.h
-index 66dcc8974cfb..bd6092febca4 100644
+index bc6c7339535e..18c4a2836007 100644
--- a/arch/arm/mach-imx/include/mach/esdctl.h
+++ b/arch/arm/mach-imx/include/mach/esdctl.h
-@@ -137,6 +137,7 @@ void __noreturn imx51_barebox_entry(void *boarddata);
- void __noreturn imx53_barebox_entry(void *boarddata);
- void __noreturn imx6q_barebox_entry(void *boarddata);
- void __noreturn imx6ul_barebox_entry(void *boarddata);
+@@ -141,6 +141,7 @@ void __noreturn imx6ul_barebox_entry(void *boarddata);
+ void __noreturn vf610_barebox_entry(void *boarddata);
+ void __noreturn imx8mq_barebox_entry(void *boarddata);
+ void __noreturn imx7d_barebox_entry(void *boarddata);
+#define imx6sx_barebox_entry(boarddata) imx6ul_barebox_entry(boarddata)
void imx_esdctl_disable(void);
#endif
diff --git a/images/Makefile.imx b/images/Makefile.imx
-index 90da95d4d025..6420490811f9 100644
+index 341ce8506d88..c32f78b7e184 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
-@@ -275,6 +275,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
+@@ -271,6 +271,11 @@ CFG_start_imx6q_sabresd.pblx.imximg = $(board)/freescale-mx6-sabresd/flash-heade
FILE_barebox-freescale-imx6q-sabresd.img = start_imx6q_sabresd.pblx.imximg
image-$(CONFIG_MACH_SABRESD) += barebox-freescale-imx6q-sabresd.img
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
new file mode 100644
index 0000000..bd444f0
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/0201-Release-pengutronix_multiv7-20181122-1.patch
@@ -0,0 +1,22 @@
+From: Rouven Czerwinski <r.czerwinski@pengutronix.de>
+Date: Thu, 22 Nov 2018 12:09:22 +0100
+Subject: [PATCH] Release pengutronix_multiv7/20181122-1
+
+Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 60a5d5ce11f4..b55ca4b03129 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,7 +1,7 @@
+ VERSION = 2018
+ PATCHLEVEL = 11
+ SUBLEVEL = 0
+-EXTRAVERSION =
++EXTRAVERSION =-20181122-1
+ NAME = None
+
+ # *DOCUMENTATION*
diff --git a/configs/platform-v7a/patches/barebox-2018.11.0/series b/configs/platform-v7a/patches/barebox-2018.11.0/series
new file mode 100644
index 0000000..e056b0c
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2018.11.0/series
@@ -0,0 +1,24 @@
+# umpf-base: v2018.11.0
+# umpf-name: pengutronix_multiv7
+# umpf-version: pengutronix_multiv7/20181122-1
+# umpf-topic: v2018.11.0/customers/pengutronix/rpi3
+# umpf-hashinfo: 1bdd9ef32c272ba5501e24ba643107855dd5149c
+# umpf-topic-range: d1f223eddbcde31ba2a3f34fc0a1a14f40ea7130..1bdd9ef32c272ba5501e24ba643107855dd5149c
+0001-ARM-import-opcode-helpers-from-Linux-kernel.patch
+0002-ARM-safely-switch-from-HYP-to-SVC-mode-if-required.patch
+0003-ARM-allow-secure-monitor-code-to-be-built-without-PS.patch
+0004-ARM-add-file-for-HYP-mode-related-setup.patch
+0005-ARM-don-t-try-to-install-secure-monitor-when-entered.patch
+0006-ARM-default-to-starting-kernel-in-HYP-mode-when-ente.patch
+0007-ARM-install-HYP-vectors-at-PBL-and-Barebox-entry.patch
+0008-ARM-rpi-add-revision-IDs-for-Pi-3-Model-B-and-Pi-Zer.patch
+0009-ARM-rpi-add-raspberry-pi-3-support.patch
+0010-ARM-rpi-autosize-malloc-area.patch
+# umpf-topic: v2018.11.0/customers/pengutronix/udoo-neo
+# umpf-hashinfo: c5f2e150d7e8d5439458df1a2cab71b25fc36e19
+# umpf-topic-range: 1bdd9ef32c272ba5501e24ba643107855dd5149c..8cacc208f8f6c9071113b12a618a54d7e80b1694
+0101-ARM-imx-add-support-for-Udoo-Neo-full.patch
+# umpf-release: pengutronix_multiv7/20181122-1
+# umpf-topic-range: 8cacc208f8f6c9071113b12a618a54d7e80b1694..45c64f6b4690a6b51be1c487de1ffec6472704e1
+0201-Release-pengutronix_multiv7-20181122-1.patch
+# umpf-end
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index cdea840..e2c8ac1 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -166,6 +166,8 @@ PTXCONF_BAREBOX_AM335X=y
PTXCONF_BAREBOX_MX6=y
PTXCONF_BAREBOX_RPI2=y
PTXCONF_BAREBOX_RPI2_NEEDS_HOST_LZOP=y
+PTXCONF_BAREBOX_RPI3=y
+# PTXCONF_BAREBOX_RPI3_NEEDS_HOST_LZOP is not set
PTXCONF_BAREBOX_VEXPRESS=y
PTXCONF_BAREBOX_ARCH_STRING="arm"
# PTXCONF_BAREBOX is not set
diff --git a/configs/platform-v7a/rules/barebox-am335x-mlo.make b/configs/platform-v7a/rules/barebox-am335x-mlo.make
index e71d057..6835d35 100644
--- a/configs/platform-v7a/rules/barebox-am335x-mlo.make
+++ b/configs/platform-v7a/rules/barebox-am335x-mlo.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X_MLO) += barebox-am335x-mlo
#
# Paths and names
#
-BAREBOX_AM335X_MLO_VERSION := 2018.05.0
-BAREBOX_AM335X_MLO_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_AM335X_MLO_VERSION := 2018.11.0
+BAREBOX_AM335X_MLO_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_AM335X_MLO := barebox-$(BAREBOX_AM335X_MLO_VERSION)
BAREBOX_AM335X_MLO_SUFFIX := tar.bz2
BAREBOX_AM335X_MLO_DIR := $(BUILDDIR)/barebox-am335x-mlo-$(BAREBOX_AM335X_MLO_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-am335x.make b/configs/platform-v7a/rules/barebox-am335x.make
index 2c35ae1..8b3c2a0 100644
--- a/configs/platform-v7a/rules/barebox-am335x.make
+++ b/configs/platform-v7a/rules/barebox-am335x.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_AM335X) += barebox-am335x
#
# Paths and names
#
-BAREBOX_AM335X_VERSION := 2018.05.0
-BAREBOX_AM335X_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_AM335X_VERSION := 2018.11.0
+BAREBOX_AM335X_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_AM335X := barebox-$(BAREBOX_AM335X_VERSION)
BAREBOX_AM335X_SUFFIX := tar.bz2
BAREBOX_AM335X_DIR := $(BUILDDIR)/barebox-am335x-$(BAREBOX_AM335X_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-mx6.make b/configs/platform-v7a/rules/barebox-mx6.make
index 7d7c2ce..3b86ea0 100644
--- a/configs/platform-v7a/rules/barebox-mx6.make
+++ b/configs/platform-v7a/rules/barebox-mx6.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_MX6) += barebox-mx6
#
# Paths and names
#
-BAREBOX_MX6_VERSION := 2018.05.0
-BAREBOX_MX6_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_MX6_VERSION := 2018.11.0
+BAREBOX_MX6_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_MX6 := barebox-$(BAREBOX_MX6_VERSION)
BAREBOX_MX6_SUFFIX := tar.bz2
BAREBOX_MX6_DIR := $(BUILDDIR)/barebox-mx6-$(BAREBOX_MX6_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-rpi2.make b/configs/platform-v7a/rules/barebox-rpi2.make
index cf9fc00..41990a0 100644
--- a/configs/platform-v7a/rules/barebox-rpi2.make
+++ b/configs/platform-v7a/rules/barebox-rpi2.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_RPI2) += barebox-rpi2
#
# Paths and names
#
-BAREBOX_RPI2_VERSION := 2018.05.0
-BAREBOX_RPI2_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_RPI2_VERSION := 2018.11.0
+BAREBOX_RPI2_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_RPI2 := barebox-$(BAREBOX_RPI2_VERSION)
BAREBOX_RPI2_SUFFIX := tar.bz2
BAREBOX_RPI2_DIR := $(BUILDDIR)/barebox-rpi2-$(BAREBOX_RPI2_VERSION)
diff --git a/configs/platform-v7a/rules/barebox-vexpress.make b/configs/platform-v7a/rules/barebox-vexpress.make
index 0266cbe..f69b6c5 100644
--- a/configs/platform-v7a/rules/barebox-vexpress.make
+++ b/configs/platform-v7a/rules/barebox-vexpress.make
@@ -16,8 +16,8 @@ PACKAGES-$(PTXCONF_BAREBOX_VEXPRESS) += barebox-vexpress
#
# Paths and names
#
-BAREBOX_VEXPRESS_VERSION := 2018.05.0
-BAREBOX_VEXPRESS_MD5 := 8286a8ea2cdd88104e5c6762d93d81db
+BAREBOX_VEXPRESS_VERSION := 2018.11.0
+BAREBOX_VEXPRESS_MD5 := 1472eae302647d1cf7f1c561a6380b43
BAREBOX_VEXPRESS := barebox-$(BAREBOX_VEXPRESS_VERSION)
BAREBOX_VEXPRESS_SUFFIX := tar.bz2
BAREBOX_VEXPRESS_DIR := $(BUILDDIR)/barebox-vexpress-$(BAREBOX_VEXPRESS_VERSION)
--
2.19.2
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [DistroKit] [PATCH v2] plaform-v7a: barebox v2018.05.0 → v2018.11.0
2018-12-06 14:39 ` [DistroKit] [PATCH v2] " Rouven Czerwinski
@ 2018-12-06 21:04 ` Alexander Dahl
2018-12-07 13:16 ` Roland Hieber
0 siblings, 1 reply; 7+ messages in thread
From: Alexander Dahl @ 2018-12-06 21:04 UTC (permalink / raw)
To: Rouven Czerwinski; +Cc: distrokit
[-- Attachment #1.1: Type: text/plain, Size: 776 bytes --]
Hei hei,
On Thu, Dec 06, 2018 at 03:39:32PM +0100, Rouven Czerwinski wrote:
> We also add the patch series for the rpi3 to barebox, they can be dropped
> in the next release.
> Raspberry Pi 3 support is enabled in the patch series which also adds the rpi3
> images.
I'm curious: what is the reason not to wait for the upcoming (?)
barebox v2018.12.0? Is that delayed? Judging from the release dates of
previous releases I would expect it in the next week or so.
Greets
Alex
--
/"\ ASCII RIBBON | »With the first link, the chain is forged. The first
\ / CAMPAIGN | speech censured, the first thought forbidden, the
X AGAINST | first freedom denied, chains us all irrevocably.«
/ \ HTML MAIL | (Jean-Luc Picard, quoting Judge Aaron Satie)
[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
[-- Attachment #2: Type: text/plain, Size: 95 bytes --]
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [DistroKit] [PATCH v2] plaform-v7a: barebox v2018.05.0 → v2018.11.0
2018-12-06 21:04 ` Alexander Dahl
@ 2018-12-07 13:16 ` Roland Hieber
2018-12-10 8:56 ` Robert Schwebel
0 siblings, 1 reply; 7+ messages in thread
From: Roland Hieber @ 2018-12-07 13:16 UTC (permalink / raw)
To: Rouven Czerwinski, distrokit
On Thu, Dec 06, 2018 at 10:04:42PM +0100, Alexander Dahl wrote:
> Hei hei,
>
> On Thu, Dec 06, 2018 at 03:39:32PM +0100, Rouven Czerwinski wrote:
> > We also add the patch series for the rpi3 to barebox, they can be dropped
> > in the next release.
> > Raspberry Pi 3 support is enabled in the patch series which also adds the rpi3
> > images.
>
> I'm curious: what is the reason not to wait for the upcoming (?)
> barebox v2018.12.0? Is that delayed? Judging from the release dates of
> previous releases I would expect it in the next week or so.
Fresh off the press :)
https://www.barebox.org/download/barebox-2018.12.0.tar.bz2
- Roland
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: [DistroKit] [PATCH v2] plaform-v7a: barebox v2018.05.0 → v2018.11.0
2018-12-07 13:16 ` Roland Hieber
@ 2018-12-10 8:56 ` Robert Schwebel
0 siblings, 0 replies; 7+ messages in thread
From: Robert Schwebel @ 2018-12-10 8:56 UTC (permalink / raw)
To: distrokit
On Fri, Dec 07, 2018 at 02:16:16PM +0100, Roland Hieber wrote:
> On Thu, Dec 06, 2018 at 10:04:42PM +0100, Alexander Dahl wrote:
> > Hei hei,
> >
> > On Thu, Dec 06, 2018 at 03:39:32PM +0100, Rouven Czerwinski wrote:
> > > We also add the patch series for the rpi3 to barebox, they can be dropped
> > > in the next release.
> > > Raspberry Pi 3 support is enabled in the patch series which also adds the rpi3
> > > images.
> >
> > I'm curious: what is the reason not to wait for the upcoming (?)
> > barebox v2018.12.0? Is that delayed? Judging from the release dates of
> > previous releases I would expect it in the next week or so.
>
> Fresh off the press :)
> https://www.barebox.org/download/barebox-2018.12.0.tar.bz2
And already merged, thanks, Rouven.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Industrial Linux Solutions | https://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2018-12-10 8:56 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-05 7:55 [DistroKit] [PATCH] plaform-v7a: barebox v2018.05.0 → v2018.11.0 Rouven Czerwinski
2018-12-05 13:15 ` Roland Hieber
2018-12-05 13:20 ` Rouven Czerwinski
2018-12-06 14:39 ` [DistroKit] [PATCH v2] " Rouven Czerwinski
2018-12-06 21:04 ` Alexander Dahl
2018-12-07 13:16 ` Roland Hieber
2018-12-10 8:56 ` Robert Schwebel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox