From: Michael Olbrich <m.olbrich@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Michael Olbrich <m.olbrich@pengutronix.de>,
Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH 03/14] v7a: barebox: version bump 2019.08.1 → 2019.10.0
Date: Tue, 29 Oct 2019 12:28:50 +0100 [thread overview]
Message-ID: <20191029112901.3380-4-m.olbrich@pengutronix.de> (raw)
In-Reply-To: <20191029112901.3380-1-m.olbrich@pengutronix.de>
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
There's a new barebox in town. Upgrade to it.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
---
.../platform-v7a/barebox-am335x-mlo.config | 8 +++++++-
configs/platform-v7a/barebox-am335x.config | 19 +++++++++++++++++--
.../platform-v7a/barebox-am335x.config.diff | 12 +++++++-----
configs/platform-v7a/barebox-mx6.config | 16 +++++++++++++++-
configs/platform-v7a/barebox-mx6.config.diff | 8 +++-----
configs/platform-v7a/barebox-rpi2.config | 11 ++++++++++-
configs/platform-v7a/barebox-rpi2.config.diff | 2 +-
configs/platform-v7a/barebox-vexpress.config | 11 ++++++++++-
.../platform-v7a/barebox-vexpress.config.diff | 2 +-
configs/platform-v7a/barebox.config | 11 ++++++++++-
configs/platform-v7a/platformconfig | 4 ++--
11 files changed, 83 insertions(+), 21 deletions(-)
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index bb75689ac100..545dba606bd4 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.08.1 Configuration
+# Barebox/arm 2019.10.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -69,6 +69,7 @@ CONFIG_MACH_PHYTEC_SOM_AM335X=y
# CONFIG_PHYTEC_SOM_AM335X_OF_AUTOENABLE is not set
# end of OMAP Features
+# CONFIG_BOARD_ARM_GENERIC_DT is not set
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
@@ -178,6 +179,8 @@ CONFIG_DEFAULT_LOGLEVEL=7
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
# end of Debugging
CONFIG_HAS_DEBUG_LL=y
@@ -246,6 +249,7 @@ CONFIG_NAND_ECC_HW=y
# CONFIG_NAND_INFO is not set
# CONFIG_NAND_BBT is not set
CONFIG_NAND_OMAP_GPMC=y
+# CONFIG_MTD_NAND_OMAP_ELM is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DENALI is not set
@@ -323,6 +327,7 @@ CONFIG_CLOCKSOURCE_TI_DM=y
# Input device support
#
# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
# CONFIG_WATCHDOG is not set
@@ -464,6 +469,7 @@ CONFIG_XYMODEM=y
# CONFIG_BOOTSTRAP is not set
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
# end of Library routines
#
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 1ffeefd6468e..6ba7c5cb36bf 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.08.1 Configuration
+# Barebox/arm 2019.10.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -72,6 +72,7 @@ CONFIG_MACH_BEAGLEBONE=y
# CONFIG_MACH_WAGO_PFC_AM35XX is not set
# end of OMAP Features
+CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
@@ -220,6 +221,8 @@ CONFIG_DEFAULT_LOGLEVEL=6
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
# end of Debugging
CONFIG_HAS_DEBUG_LL=y
@@ -429,12 +432,14 @@ CONFIG_OF_GPIO=y
CONFIG_OF_BAREBOX_DRIVERS=y
# CONFIG_OF_BAREBOX_ENV_IN_FS is not set
# CONFIG_AIODEV is not set
+CONFIG_ARM_AMBA=y
#
# serial drivers
#
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
@@ -543,6 +548,7 @@ CONFIG_NAND_READ_OOB=y
CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
+# CONFIG_MTD_NAND_OMAP_ELM is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DENALI is not set
@@ -607,6 +613,7 @@ CONFIG_MCI_WRITE=y
#
# CONFIG_MCI_DW is not set
CONFIG_MCI_OMAP_HSMMC=y
+# CONFIG_MCI_MMCI is not set
# CONFIG_MCI_SPI is not set
#
@@ -632,6 +639,7 @@ CONFIG_CLOCKSOURCE_TI_DM=y
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
# end of MFD
#
@@ -665,6 +673,7 @@ CONFIG_EEPROM_AT24=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
CONFIG_WATCHDOG=y
@@ -690,6 +699,7 @@ CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_OMAP=y
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_GPIO_SX150X is not set
# end of GPIO
@@ -703,7 +713,9 @@ CONFIG_PINCTRL=y
CONFIG_PINCTRL_SINGLE=y
# end of Pin controllers
-# CONFIG_NVMEM is not set
+CONFIG_NVMEM=y
+# CONFIG_NVMEM_SNVS_LPGPR is not set
+# CONFIG_EEPROM_93XX46 is not set
#
# Bus devices
@@ -813,6 +825,7 @@ CONFIG_LZO_DECOMPRESS=y
CONFIG_FNMATCH=y
CONFIG_QSORT=y
CONFIG_IMAGE_SPARSE=y
+CONFIG_LIBFDT=y
# CONFIG_RATP is not set
# CONFIG_ALLOW_PRNG_FALLBACK is not set
# CONFIG_CRC_CCITT is not set
@@ -826,6 +839,8 @@ CONFIG_IMAGE_SPARSE=y
# CONFIG_BAREBOX_LOGO is not set
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
# end of Library routines
#
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index ac11713a9abe..c2c0e9f43dc9 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,10 +1,9 @@
-8fdac5cea1dd13f3b0fbae5c0ea20c43
+f0f401a38f730b82ca95db270f8c2d48
# CONFIG_AM33XX_NET_BOOT is not set
CONFIG_ARCH_AM33XX=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_TEXT_BASE is undefined
-# CONFIG_ARM_AMBA is undefined
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_ARM_BOARD_APPEND_ATAG=y
# CONFIG_ARM_BOARD_PREPEND_ATAG is not set
@@ -37,15 +36,16 @@ CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
# CONFIG_DRIVER_SPI_FSL_QUADSPI is not set
CONFIG_DRIVER_SPI_OMAP3=y
+# CONFIG_EEPROM_93XX46 is not set
CONFIG_EEPROM_AT24=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_OMAP=y
-# CONFIG_GPIO_PL061 is undefined
# CONFIG_GREGORIAN_CALENDER is undefined
# CONFIG_HAVE_CLK is undefined
# CONFIG_I2C_MV64XXX is undefined
CONFIG_I2C_OMAP=y
+# CONFIG_I2C_STM32 is undefined
CONFIG_IMAGE_SPARSE=y
CONFIG_MACH_AFI_GF=y
# CONFIG_MACH_BEAGLE is not set
@@ -60,12 +60,13 @@ CONFIG_MACH_BEAGLEBONE=y
# CONFIG_MACH_WAGO_PFC_AM35XX is not set
# CONFIG_MCI_BCM283X is undefined
# CONFIG_MCI_BCM283X_SDHOST is undefined
-# CONFIG_MCI_MMCI is undefined
+# CONFIG_MCI_MMCI is not set
CONFIG_MCI_OMAP_HSMMC=y
CONFIG_MTD_M25P80=y
# CONFIG_MTD_NAND_DENALI is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_OMAP_ELM is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
# CONFIG_MTD_SST25L is not set
@@ -81,6 +82,8 @@ CONFIG_NAND_ECC_SOFT=y
CONFIG_NAND_INFO=y
CONFIG_NAND_OMAP_GPMC=y
CONFIG_NAND_READ_OOB=y
+CONFIG_NVMEM=y
+# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_OMAP_BUILD_IFT is not set
# CONFIG_OMAP_BUILD_SPI is not set
CONFIG_OMAP_GPMC=y
@@ -89,7 +92,6 @@ CONFIG_OMAP_MULTI_BOARDS=y
CONFIG_PINCTRL_SINGLE=y
CONFIG_PROMPT="barebox> "
# CONFIG_REGULATOR_BCM283X is undefined
-# CONFIG_SERIAL_AMBA_PL011 is undefined
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MEM=y
CONFIG_THUMB2_BAREBOX=y
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 2b69d0a03e69..dad7170503ac 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.08.1 Configuration
+# Barebox/arm 2019.10.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -62,6 +62,7 @@ CONFIG_RESET_IMX_SRC=y
CONFIG_ARCH_IMX6=y
CONFIG_ARCH_IMX6SX=y
CONFIG_IMX_MULTI_BOARDS=y
+# CONFIG_MACH_SCB9328 is not set
# CONFIG_MACH_TX25 is not set
# CONFIG_MACH_PCA100 is not set
# CONFIG_MACH_PCM038 is not set
@@ -127,6 +128,7 @@ CONFIG_IMX_IIM_FUSE_BLOW=y
# CONFIG_HABV4 is not set
# end of i.MX specific settings
+CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_AEABI=y
CONFIG_THUMB2_BAREBOX=y
@@ -280,6 +282,8 @@ CONFIG_DEFAULT_LOGLEVEL=6
CONFIG_DEBUG_IMX_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
# end of Debugging
CONFIG_HAS_DEBUG_LL=y
@@ -494,12 +498,14 @@ CONFIG_OF_GPIO=y
CONFIG_OF_BAREBOX_DRIVERS=y
# CONFIG_OF_BAREBOX_ENV_IN_FS is not set
# CONFIG_AIODEV is not set
+CONFIG_ARM_AMBA=y
#
# serial drivers
#
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_DRIVER_SERIAL_ARM_DCC is not set
+# CONFIG_SERIAL_AMBA_PL011 is not set
CONFIG_DRIVER_SERIAL_IMX=y
# CONFIG_DRIVER_SERIAL_NS16550 is not set
# CONFIG_DRIVER_SERIAL_CADENCE is not set
@@ -574,6 +580,7 @@ CONFIG_I2C_GPIO=y
CONFIG_I2C_IMX=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_STM32 is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_MUX is not set
@@ -706,6 +713,7 @@ CONFIG_MCI_MMC_BOOT_PARTITIONS=y
# CONFIG_MCI_DW is not set
CONFIG_MCI_IMX_ESDHC=y
# CONFIG_MCI_IMX_ESDHC_PIO is not set
+# CONFIG_MCI_MMCI is not set
# CONFIG_MCI_SPI is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
@@ -736,6 +744,7 @@ CONFIG_CLOCKSOURCE_IMX_GPT=y
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
# end of MFD
#
@@ -772,6 +781,7 @@ CONFIG_KEYBOARD_GPIO=y
# CONFIG_KEYBOARD_IMX_KEYPAD is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
CONFIG_WATCHDOG_IMX_RESET_SOURCE=y
@@ -799,6 +809,7 @@ CONFIG_GPIOLIB=y
CONFIG_GPIO_IMX=y
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+# CONFIG_GPIO_PL061 is not set
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_GPIO_SX150X is not set
# end of GPIO
@@ -946,6 +957,7 @@ CONFIG_LIBSCAN=y
CONFIG_LIBUBIGEN=y
CONFIG_IMAGE_SPARSE=y
CONFIG_STMP_DEVICE=y
+CONFIG_LIBFDT=y
# CONFIG_RATP is not set
# CONFIG_ALLOW_PRNG_FALLBACK is not set
# CONFIG_CRC_CCITT is not set
@@ -965,6 +977,8 @@ CONFIG_LODEPNG=y
CONFIG_PRINTF_UUID=y
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
# end of Library routines
#
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 680ea227a491..bdfcf62400d2 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-8fdac5cea1dd13f3b0fbae5c0ea20c43
+f0f401a38f730b82ca95db270f8c2d48
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_FEC_IMX=y
CONFIG_ARCH_HAS_IMX_GPT=y
@@ -9,7 +9,6 @@ CONFIG_ARCH_IMX=y
CONFIG_ARCH_IMX_IMXIMAGE=y
# CONFIG_ARCH_IMX_USBLOADER is not set
CONFIG_ARCH_TEXT_BASE=0x4fc00000
-# CONFIG_ARM_AMBA is undefined
CONFIG_ARM_ASM_UNIFIED=y
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
@@ -68,7 +67,6 @@ CONFIG_FS_UBIFS_COMPRESSION_LZO=y
# CONFIG_FS_UBIFS_COMPRESSION_ZLIB is not set
CONFIG_GENERIC_PHY=y
CONFIG_GPIO_IMX=y
-# CONFIG_GPIO_PL061 is undefined
# CONFIG_HABV4 is not set
# CONFIG_HWRNG is not set
CONFIG_HW_HAS_PCI=y
@@ -126,6 +124,7 @@ CONFIG_MACH_NITROGEN6=y
# CONFIG_MACH_RPI_COMMON is undefined
CONFIG_MACH_SABRELITE=y
# CONFIG_MACH_SABRESD is not set
+# CONFIG_MACH_SCB9328 is not set
# CONFIG_MACH_SOLIDRUN_MICROSOM is not set
# CONFIG_MACH_TECHNEXION_PICO_HOBBIT is not set
# CONFIG_MACH_TECHNEXION_WANDBOARD is not set
@@ -148,7 +147,7 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MCI_BCM283X_SDHOST is undefined
CONFIG_MCI_IMX_ESDHC=y
# CONFIG_MCI_IMX_ESDHC_PIO is not set
-# CONFIG_MCI_MMCI is undefined
+# CONFIG_MCI_MMCI is not set
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
# CONFIG_MCI_STARTUP is not set
CONFIG_MFD_SYSCON=y
@@ -205,7 +204,6 @@ CONFIG_PWM_IMX=y
CONFIG_REGULATOR_FIXED=y
# CONFIG_REGULATOR_PFUZE is not set
CONFIG_RESET_IMX_SRC=y
-# CONFIG_SERIAL_AMBA_PL011 is undefined
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MEM=y
CONFIG_STMP_DEVICE=y
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 9fadd665c193..a5caee8eb73c 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.08.1 Configuration
+# Barebox/arm 2019.10.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -62,6 +62,7 @@ CONFIG_MACH_RPI3=y
# end of select Broadcom BCM283X boards to be built
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
# CONFIG_ARM_BOARD_APPEND_ATAG is not set
@@ -210,6 +211,8 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
# end of Debugging
CONFIG_HAS_DEBUG_LL=y
@@ -491,6 +494,7 @@ CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_STM32 is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_MUX is not set
@@ -600,6 +604,7 @@ CONFIG_CLOCKSOURCE_ARMV8_TIMER=y
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
# end of MFD
#
@@ -633,6 +638,7 @@ CONFIG_LED_TRIGGERS=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
CONFIG_WATCHDOG=y
@@ -781,6 +787,7 @@ CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_FNMATCH=y
CONFIG_QSORT=y
+CONFIG_LIBFDT=y
# CONFIG_RATP is not set
# CONFIG_ALLOW_PRNG_FALLBACK is not set
# CONFIG_CRC_CCITT is not set
@@ -794,6 +801,8 @@ CONFIG_QSORT=y
# CONFIG_BAREBOX_LOGO is not set
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
# end of Library routines
#
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index e322a08e22f0..6aa532a4b838 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,4 +1,4 @@
-8fdac5cea1dd13f3b0fbae5c0ea20c43
+f0f401a38f730b82ca95db270f8c2d48
CONFIG_DRIVER_SERIAL_NS16550=y
# CONFIG_EEPROM_93XX46 is not set
CONFIG_MACH_RPI2=y
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 0fa14357bd20..388245d8817c 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.08.1 Configuration
+# Barebox/arm 2019.10.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -52,6 +52,7 @@ CONFIG_CPU_32v7=y
CONFIG_ARCH_TEXT_BASE=0x0
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_MACH_VEXPRESS=y
+CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
# CONFIG_ARM_BOARD_APPEND_ATAG is not set
@@ -197,6 +198,8 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
# end of Debugging
CONFIG_HAS_DEBUG_LL=y
@@ -472,6 +475,7 @@ CONFIG_I2C=y
#
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_STM32 is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_MUX is not set
@@ -587,6 +591,7 @@ CONFIG_CLOCKSOURCE_ARMV8_TIMER=y
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
# end of MFD
#
@@ -613,6 +618,7 @@ CONFIG_LED_TRIGGERS=y
# Input device support
#
# CONFIG_KEYBOARD_USB is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
CONFIG_WATCHDOG=y
@@ -740,6 +746,7 @@ CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_FNMATCH=y
CONFIG_QSORT=y
+CONFIG_LIBFDT=y
# CONFIG_RATP is not set
# CONFIG_ALLOW_PRNG_FALLBACK is not set
# CONFIG_CRC_CCITT is not set
@@ -753,6 +760,8 @@ CONFIG_QSORT=y
# CONFIG_BAREBOX_LOGO is not set
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
# end of Library routines
#
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index 9cf068124418..b49eb265d7b6 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-8fdac5cea1dd13f3b0fbae5c0ea20c43
+f0f401a38f730b82ca95db270f8c2d48
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index adbbc373824b..b2e99c91151b 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2019.08.1 Configuration
+# Barebox/arm 2019.10.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -62,6 +62,7 @@ CONFIG_MACH_RPI3=y
# end of select Broadcom BCM283X boards to be built
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
+CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
# CONFIG_ARM_BOARD_APPEND_ATAG is not set
@@ -210,6 +211,8 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
+# CONFIG_UBSAN is not set
+CONFIG_UBSAN_ALIGNMENT=y
# end of Debugging
CONFIG_HAS_DEBUG_LL=y
@@ -491,6 +494,7 @@ CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_GPIO=y
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_MV64XXX is not set
+# CONFIG_I2C_STM32 is not set
# end of I2C Hardware Bus support
# CONFIG_I2C_MUX is not set
@@ -600,6 +604,7 @@ CONFIG_CLOCKSOURCE_ARMV8_TIMER=y
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
+# CONFIG_MFD_STPMIC1 is not set
# end of MFD
#
@@ -633,6 +638,7 @@ CONFIG_LED_TRIGGERS=y
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
+# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
CONFIG_WATCHDOG=y
@@ -779,6 +785,7 @@ CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_FNMATCH=y
CONFIG_QSORT=y
+CONFIG_LIBFDT=y
# CONFIG_RATP is not set
# CONFIG_ALLOW_PRNG_FALLBACK is not set
# CONFIG_CRC_CCITT is not set
@@ -792,6 +799,8 @@ CONFIG_QSORT=y
# CONFIG_BAREBOX_LOGO is not set
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
+CONFIG_ARCH_HAS_STACK_DUMP=y
+CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
# end of Library routines
#
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index afb6d2531a0b..60681599c32a 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -166,8 +166,8 @@ PTXCONF_CONSOLE_SPEED="115200"
# PTXCONF_AT91BOOTSTRAP2 is not set
PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2019.08.1"
-PTXCONF_BAREBOX_COMMON_MD5="7538a4daba730b93d52fb3201c45df3e"
+PTXCONF_BAREBOX_COMMON_VERSION="2019.10.0"
+PTXCONF_BAREBOX_COMMON_MD5="ae5315916a0b493a3545e99f5e26de5c"
PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
PTXCONF_BAREBOX_AM335X_MLO=y
PTXCONF_BAREBOX_AM335X=y
--
2.20.1
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
next prev parent reply other threads:[~2019-10-29 11:28 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-29 11:28 [DistroKit] [PATCH 00/14] Barebox Update and Cleanup Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 01/14] v7a: barebox-common: modify oldconfig to affect all bareboxes Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 02/14] v7a: barebox-common: add clean target that affects " Michael Olbrich
2019-10-29 11:28 ` Michael Olbrich [this message]
2019-10-29 11:28 ` [DistroKit] [PATCH 04/14] barebox-vexpress: sync with latest barebox template Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 05/14] barebox-mx6: " Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 06/14] barebox-rpi2: " Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 07/14] barebox-am335x-mlo: " Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 08/14] barebox-am335x: " Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 09/14] barebox-common: " Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 10/14] barebox-vexpress: remove installed files Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 11/14] barebox-rpi2: don't add a suffix to the images Michael Olbrich
2019-10-29 11:28 ` [DistroKit] [PATCH 12/14] barebox-am335x-mlo: actually remove images during 'clean' Michael Olbrich
2019-10-29 11:29 ` [DistroKit] [PATCH 13/14] barebox-am335x: " Michael Olbrich
2019-10-29 11:29 ` [DistroKit] [PATCH 14/14] barebox-mx6: " Michael Olbrich
2019-10-29 15:42 ` [DistroKit] [PATCH 00/14] Barebox Update and Cleanup Robert Schwebel
2019-11-02 9:15 ` Robert Schwebel
2019-11-04 10:09 ` Roland Hieber
2019-11-04 13:18 ` Rouven Czerwinski
2019-11-04 21:16 ` Michael Olbrich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191029112901.3380-4-m.olbrich@pengutronix.de \
--to=m.olbrich@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox