DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Holger Assmann <h.assmann@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Holger Assmann <h.assmann@pengutronix.de>,
	Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH v2 1/2] platform-v7a: kernel version bump 5.6.2 -> 5.8
Date: Mon, 10 Aug 2020 17:27:29 +0200	[thread overview]
Message-ID: <20200810152730.9416-1-h.assmann@pengutronix.de> (raw)

The latest kernel release now contains the device trees for the
Linux Automation MC-1. We can thus drop them from the BSP.

On the Kconfig front, we dropped CONFIG_MMC_OMAP(_HS) in favor of
CONFIG_MMC_SDHCI_OMAP. For a while now, Linux has had a sdhci-omap
driver for TI's OMAP SoCs making use of the SDHCI core library.
This was in addition to the older omap-hsmmc driver, which didn't.

Linux commit 0b4edf11187 ("ARM: dts: Move am33xx and am43xx mmc nodes
tosdhci-omap driver") first included in v5.8 changes the device tree
compatible of the mmc nodes on the am33xx and am43xx SoCs away from
the omap-hsmmc to the SDHCI driver. Add the new compatibles, so we
aren't broken by the change.

Co-authored-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Holger Assmann <h.assmann@pengutronix.de>
---
 .../platform-v7a/dts/stm32mp157c-lxa-mc1.dts  | 362 ------------------
 .../platform-v7a/dts/stm32mp15xx-osd32.dtsi   | 229 -----------
 configs/platform-v7a/kernelconfig             | 163 +++++---
 configs/platform-v7a/platformconfig           |   4 +-
 4 files changed, 116 insertions(+), 642 deletions(-)
 delete mode 100644 configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts
 delete mode 100644 configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi

diff --git a/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts b/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts
deleted file mode 100644
index d65c823..0000000
--- a/configs/platform-v7a/dts/stm32mp157c-lxa-mc1.dts
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-/dts-v1/;
-
-#include "stm32mp157.dtsi"
-#include "stm32mp15xx-osd32.dtsi"
-#include "stm32mp15xxac-pinctrl.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Linux Automation MC-1 board";
-	compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		mmc0 = &sdmmc1;
-		mmc1 = &sdmmc2;
-		serial0 = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 31 63 95 127 159 191 223 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_5v2>; /* 3V3_BACKLIGHT */
-	};
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	led-act {
-		compatible = "gpio-leds";
-
-		led-green {
-			label = "mc1:green:act";
-			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-rgb {
-		compatible = "pwm-leds";
-
-		led-red {
-			label = "mc1:red:rgb";
-			pwms = <&leds_pwm 1 1000000 0>;
-			max-brightness = <255>;
-			active-low;
-		};
-
-		led-green {
-			label = "mc1:green:rgb";
-			pwms = <&leds_pwm 2 1000000 0>;
-			max-brightness = <255>;
-			active-low;
-		};
-
-		led-blue {
-			label = "mc1:blue:rgb";
-			pwms = <&leds_pwm 3 1000000 0>;
-			max-brightness = <255>;
-			active-low;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,etm0700g0edh6", "simple-panel";
-		backlight = <&backlight>;
-		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&ltdc_ep0_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&v3v3>;
-	};
-
-	/* supplied by either debug board or PoE */
-	reg_5v2: regulator_5v2 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V2";
-		regulator-min-microvolt = <5200000>;
-		regulator-max-microvolt = <5200000>;
-		regulator-always-on;
-	};
-};
-
-&ethernet0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_rgmii_mc1pins_b>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio0 {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@3 { /* KSZ9031RN */
-			reg = <3>;
-			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
-			interrupt-parent = <&gpioa>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
-			rxc-skew-ps = <1860>;
-			txc-skew-ps = <1860>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-			micrel,force-master;
-		};
-	};
-};
-
-&gpioz {
-	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
-			  "HWID4", "HWID5";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_mc1pins_b>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		interrupt-parent = <&gpiod>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
-		vcc-supply = <&reg_3v3>;
-		reg = <0x38>;
-		reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
-		touchscreen-size-x = <1792>;
-		touchscreen-size-y = <1024>;
-		wakeup-source;
-	};
-};
-
-&ltdc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ltdc_mc1pins_c>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&panel_input>;
-		};
-	};
-};
-
-&pmic {
-	regulators {
-		buck4-supply = <&reg_5v2>;	/* VIN */
-		ldo2-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
-		ldo5-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
-		boost-supply = <&reg_5v2>;	/* PMIC_BSTIN */
-		pwr_sw2-supply = <&bst_out>;    /* PMIC_SWIN */
-	};
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	bus-width = <4>;
-	cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	no-1-8-v;
-	st,neg-edge;
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&sdmmc1_b4_pins_a {
-	/*
-	 * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
-	 * work, thus enable internal pull-ups.
-	 */
-	pins1 {
-		/delete-property/ bias-disable;
-		bias-pull-up;
-	};
-	pins2 {
-		/delete-property/ bias-disable;
-		bias-pull-up;
-	};
-};
-
-&sdmmc2 {
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_mc1pins_b>;
-	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_mc1pins_b>;
-	bus-width = <8>;
-	no-1-8-v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	st,neg-edge;
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&timers3 {
-	status = "okay";
-
-	backlight_pwm: pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm3_mc1pins_b>;
-		status = "okay";
-	};
-};
-
-&timers5 {
-	status = "okay";
-
-	leds_pwm: pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm5_mc1pins_b>;
-		status = "okay";
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	ethernet0_rgmii_mc1pins_b: mc1-rgmii-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-			bias-disable;
-		};
-	};
-
-	i2c5_mc1pins_b: mc1-i2c5-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
-			         <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	ltdc_mc1pins_c: mc1-ltdc-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
-				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
-				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
-				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
-				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
-				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
-				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
-				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
-				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
-				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
-				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
-				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
-				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
-				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
-				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
-				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
-				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
-				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
-				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
-				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
-				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	pwm3_mc1pins_b: mc1-pwm3-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm5_mc1pins_b: mc1-pwm5-1 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
-				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
-				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	sdmmc2_d47_mc1pins_b: mc1-sdmmc2-d47-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-};
diff --git a/configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi b/configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi
deleted file mode 100644
index cd0bbf0..0000000
--- a/configs/platform-v7a/dts/stm32mp15xx-osd32.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-#include "stm32mp15-pinctrl.dtsi"
-
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-/ {
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mcuram2: mcuram2@10000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10000000 0x40000>;
-			no-map;
-		};
-
-		vdev0vring0: vdev0vring0@10040000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10040000 0x1000>;
-			no-map;
-		};
-
-		vdev0vring1: vdev0vring1@10041000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10041000 0x1000>;
-			no-map;
-		};
-
-		vdev0buffer: vdev0buffer@10042000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10042000 0x4000>;
-			no-map;
-		};
-
-		mcuram: mcuram@30000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x30000000 0x40000>;
-			no-map;
-		};
-
-		retram: retram@38000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x38000000 0x10000>;
-			no-map;
-		};
-	};
-
-	reg_sip_eeprom: regulator_eeprom {
-		compatible = "regulator-fixed";
-		regulator-name = "sip_eeprom";
-		regulator-always-on;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-
-			ldo1-supply = <&v3v3>;
-			ldo6-supply = <&v3v3>;
-			pwr_sw1-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO1 0>;
-
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO2 0>;
-
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO6 0>;
-
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-			};
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
-			};
-
-			vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
-			};
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-		};
-
-		pmic_watchdog: watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-
-	sip_eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		vcc-supply = <&reg_sip_eeprom>;
-		reg = <0x50>;
-	};
-};
-
-&ipcc {
-	status = "okay";
-};
-
-&m4_rproc {
-	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
-			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
-	interrupt-parent = <&exti>;
-	interrupts = <68 1>;
-	status = "okay";
-};
-
-&rng1 {
-	status = "okay";
-};
diff --git a/configs/platform-v7a/kernelconfig b/configs/platform-v7a/kernelconfig
index fd81891..c24bcaa 100644
--- a/configs/platform-v7a/kernelconfig
+++ b/configs/platform-v7a/kernelconfig
@@ -1,18 +1,16 @@
 #
 # Automatically generated file; DO NOT EDIT.
-# Linux/arm 5.6.2 Kernel Configuration
-#
-
-#
-# Compiler: arm-v7a-linux-gnueabihf-gcc (OSELAS.Toolchain-2019.09.1 9-20191130) 9.2.1 20191130
+# Linux/arm 5.8.0-20200810-1 Kernel Configuration
 #
+CONFIG_CC_VERSION_TEXT="arm-v7a-linux-gnueabihf-gcc (OSELAS.Toolchain-2019.09.1 9-20191130) 9.2.1 20191130"
 CONFIG_CC_IS_GCC=y
 CONFIG_GCC_VERSION=90201
+CONFIG_LD_VERSION=232000000
 CONFIG_CLANG_VERSION=0
 CONFIG_CC_CAN_LINK=y
+CONFIG_CC_CAN_LINK_STATIC=y
 CONFIG_CC_HAS_ASM_GOTO=y
 CONFIG_CC_HAS_ASM_INLINE=y
-CONFIG_CC_HAS_WARN_MAYBE_UNINITIALIZED=y
 CONFIG_IRQ_WORK=y
 CONFIG_BUILDTIME_TABLE_SORT=y
 
@@ -34,12 +32,14 @@ CONFIG_HAVE_KERNEL_LZ4=y
 # CONFIG_KERNEL_XZ is not set
 CONFIG_KERNEL_LZO=y
 # CONFIG_KERNEL_LZ4 is not set
+CONFIG_DEFAULT_INIT=""
 CONFIG_DEFAULT_HOSTNAME="(none)"
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_WATCH_QUEUE is not set
 CONFIG_CROSS_MEMORY_ATTACH=y
 # CONFIG_USELIB is not set
 # CONFIG_AUDIT is not set
@@ -63,7 +63,6 @@ CONFIG_SPARSE_IRQ=y
 # end of IRQ subsystem
 
 CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_ARCH_HAS_TICK_BROADCAST=y
@@ -93,6 +92,7 @@ CONFIG_PREEMPTION=y
 CONFIG_TICK_CPU_ACCOUNTING=y
 # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
 # CONFIG_IRQ_TIME_ACCOUNTING is not set
+# CONFIG_SCHED_THERMAL_PRESSURE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_PSI is not set
@@ -108,7 +108,9 @@ CONFIG_PREEMPT_RCU=y
 # CONFIG_RCU_EXPERT is not set
 CONFIG_SRCU=y
 CONFIG_TREE_SRCU=y
+CONFIG_TASKS_RCU_GENERIC=y
 CONFIG_TASKS_RCU=y
+CONFIG_TASKS_RUDE_RCU=y
 CONFIG_RCU_STALL_COMMON=y
 CONFIG_RCU_NEED_SEGCBLIST=y
 # end of RCU Subsystem
@@ -386,6 +388,7 @@ CONFIG_ARCH_OMAP2PLUS=y
 # CONFIG_ARCH_SIRF is not set
 # CONFIG_ARCH_QCOM is not set
 # CONFIG_ARCH_RDA is not set
+# CONFIG_ARCH_REALTEK is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_ROCKCHIP is not set
 # CONFIG_ARCH_S5PV210 is not set
@@ -517,6 +520,9 @@ CONFIG_ARM_PATCH_IDIV=y
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
 CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
 CONFIG_HAVE_ARCH_PFN_VALID=y
 CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
@@ -581,7 +587,6 @@ CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y
 # CONFIG_ARM_IMX_CPUFREQ_DT is not set
 # CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
 CONFIG_ARM_TI_CPUFREQ=y
-# CONFIG_QORIQ_CPUFREQ is not set
 # end of CPU Frequency scaling
 
 #
@@ -643,11 +648,12 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_FIRMWARE_MEMMAP is not set
 CONFIG_RASPBERRYPI_FIRMWARE=y
 # CONFIG_TRUSTED_FOUNDATIONS is not set
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_ARM_PSCI_FW=y
 # CONFIG_GOOGLE_FIRMWARE is not set
 # CONFIG_IMX_DSP is not set
 # CONFIG_IMX_SCU is not set
+CONFIG_ARM_PSCI_FW=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_ARM_SMCCC_DISCOVERY=y
 
 #
 # Tegra firmware driver
@@ -671,7 +677,6 @@ CONFIG_CRYPTO_CHACHA20_NEON=y
 CONFIG_CRYPTO_POLY1305_ARM=y
 # CONFIG_CRYPTO_NHPOLY1305_NEON is not set
 CONFIG_CRYPTO_CURVE25519_NEON=y
-# CONFIG_VIRTUALIZATION is not set
 
 #
 # General architecture-dependent options
@@ -696,7 +701,6 @@ CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
 CONFIG_ARCH_32BIT_OFF_T=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_CLK=y
 CONFIG_HAVE_HW_BREAKPOINT=y
 CONFIG_HAVE_PERF_REGS=y
 CONFIG_HAVE_PERF_USER_STACK_DUMP=y
@@ -739,7 +743,6 @@ CONFIG_ARCH_HAS_PHYS_TO_DMA=y
 CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
 # end of GCOV-based kernel profiling
 
-CONFIG_PLUGIN_HOSTCC=""
 CONFIG_HAVE_GCC_PLUGINS=y
 # end of General architecture-dependent options
 
@@ -756,6 +759,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_TRIM_UNUSED_KSYMS=y
+CONFIG_UNUSED_KSYMS_WHITELIST=""
 CONFIG_MODULES_TREE_LOOKUP=y
 CONFIG_BLOCK=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -769,6 +773,7 @@ CONFIG_BLOCK=y
 # CONFIG_BLK_CGROUP_IOCOST is not set
 # CONFIG_BLK_DEBUG_FS is not set
 # CONFIG_BLK_SED_OPAL is not set
+# CONFIG_BLK_INLINE_ENCRYPTION is not set
 
 #
 # Partition Types
@@ -795,6 +800,7 @@ CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
 CONFIG_FREEZER=y
 
 #
@@ -815,12 +821,16 @@ CONFIG_COREDUMP=y
 #
 # Memory Management options
 #
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
 CONFIG_MEMORY_ISOLATION=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_COMPACTION=y
+# CONFIG_PAGE_REPORTING is not set
 CONFIG_MIGRATION=y
 CONFIG_CONTIG_ALLOC=y
 CONFIG_BOUNCE=y
@@ -906,6 +916,7 @@ CONFIG_IPV6=y
 # CONFIG_IPV6_MROUTE is not set
 # CONFIG_IPV6_SEG6_LWTUNNEL is not set
 # CONFIG_IPV6_SEG6_HMAC is not set
+# CONFIG_IPV6_RPL_LWTUNNEL is not set
 # CONFIG_MPTCP is not set
 # CONFIG_NETWORK_SECMARK is not set
 CONFIG_NET_PTP_CLASSIFY=y
@@ -1042,6 +1053,7 @@ CONFIG_DNS_RESOLVER=y
 # CONFIG_HSR is not set
 # CONFIG_NET_SWITCHDEV is not set
 # CONFIG_NET_L3_MASTER_DEV is not set
+# CONFIG_QRTR is not set
 # CONFIG_NET_NCSI is not set
 CONFIG_RPS=y
 CONFIG_RFS_ACCEL=y
@@ -1140,6 +1152,8 @@ CONFIG_OMAP_OCP2SCP=y
 # CONFIG_SIMPLE_PM_BUS is not set
 CONFIG_TI_SYSC=y
 CONFIG_VEXPRESS_CONFIG=y
+# CONFIG_FSL_MC_BUS is not set
+# CONFIG_MHI_BUS is not set
 # end of Bus devices
 
 # CONFIG_CONNECTOR is not set
@@ -1290,7 +1304,6 @@ CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
 # CONFIG_LATTICE_ECP3_CONFIG is not set
 CONFIG_SRAM=y
 CONFIG_SRAM_EXEC=y
-CONFIG_VEXPRESS_SYSCFG=y
 # CONFIG_XILINX_SDFEC is not set
 # CONFIG_PVPANIC is not set
 # CONFIG_C2PORT is not set
@@ -1353,6 +1366,7 @@ CONFIG_WIREGUARD=y
 # CONFIG_IPVLAN is not set
 # CONFIG_VXLAN is not set
 # CONFIG_GENEVE is not set
+# CONFIG_BAREUDP is not set
 # CONFIG_GTP is not set
 # CONFIG_MACSEC is not set
 # CONFIG_NETCONSOLE is not set
@@ -1420,17 +1434,18 @@ CONFIG_STMMAC_PLATFORM=y
 # CONFIG_DWMAC_DWC_QOS_ETH is not set
 CONFIG_DWMAC_GENERIC=y
 CONFIG_DWMAC_STM32=y
+CONFIG_DWMAC_IMX8=y
 # CONFIG_NET_VENDOR_SYNOPSYS is not set
 CONFIG_NET_VENDOR_TI=y
 CONFIG_TI_DAVINCI_MDIO=y
 CONFIG_TI_CPSW_PHY_SEL=y
 CONFIG_TI_CPSW=y
 CONFIG_TI_CPTS=y
-CONFIG_TI_CPTS_MOD=y
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_NET_VENDOR_XILINX=y
 # CONFIG_XILINX_AXI_EMAC is not set
+# CONFIG_XILINX_LL_TEMAC is not set
 CONFIG_MDIO_DEVICE=y
 CONFIG_MDIO_BUS=y
 # CONFIG_MDIO_BCM_UNIMAC is not set
@@ -1439,7 +1454,11 @@ CONFIG_MDIO_BUS=y
 # CONFIG_MDIO_BUS_MUX_MMIOREG is not set
 # CONFIG_MDIO_BUS_MUX_MULTIPLEXER is not set
 # CONFIG_MDIO_HISI_FEMAC is not set
+# CONFIG_MDIO_IPQ4019 is not set
+# CONFIG_MDIO_IPQ8064 is not set
 # CONFIG_MDIO_MSCC_MIIM is not set
+# CONFIG_MDIO_MVUSB is not set
+CONFIG_MDIO_XPCS=y
 CONFIG_PHYLINK=y
 CONFIG_PHYLIB=y
 CONFIG_SWPHY=y
@@ -1456,6 +1475,7 @@ CONFIG_SWPHY=y
 # CONFIG_BCM7XXX_PHY is not set
 # CONFIG_BCM87XX_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
+# CONFIG_BCM54140_PHY is not set
 # CONFIG_BCM84881_PHY is not set
 # CONFIG_CICADA_PHY is not set
 # CONFIG_CORTINA_PHY is not set
@@ -1590,13 +1610,7 @@ CONFIG_TTY=y
 # CONFIG_VT is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_N_GSM is not set
-# CONFIG_TRACE_SINK is not set
-CONFIG_NULL_TTY=y
 CONFIG_LDISC_AUTOLOAD=y
-CONFIG_DEVMEM=y
-CONFIG_DEVKMEM=y
 
 #
 # Serial drivers
@@ -1653,14 +1667,19 @@ CONFIG_SERIAL_OMAP_CONSOLE=y
 # CONFIG_SERIAL_FSL_LINFLEXUART is not set
 # CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set
 # CONFIG_SERIAL_ST_ASC is not set
+# CONFIG_SERIAL_SPRD is not set
 CONFIG_SERIAL_STM32=y
 CONFIG_SERIAL_STM32_CONSOLE=y
 # end of Serial drivers
 
 CONFIG_SERIAL_MCTRL_GPIO=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_N_GSM is not set
+CONFIG_NULL_TTY=y
+# CONFIG_TRACE_SINK is not set
+# CONFIG_HVC_DCC is not set
 # CONFIG_SERIAL_DEV_BUS is not set
 # CONFIG_TTY_PRINTK is not set
-# CONFIG_HVC_DCC is not set
 # CONFIG_VIRTIO_CONSOLE is not set
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_IPMB_DEVICE_INTERFACE is not set
@@ -1670,8 +1689,10 @@ CONFIG_HW_RANDOM_BCM2835=y
 # CONFIG_HW_RANDOM_IPROC_RNG200 is not set
 CONFIG_HW_RANDOM_OMAP=y
 CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_HW_RANDOM_IMX_RNGC=y
 CONFIG_HW_RANDOM_STM32=y
+# CONFIG_HW_RANDOM_CCTRNG is not set
+CONFIG_DEVMEM=y
+CONFIG_DEVKMEM=y
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 # CONFIG_XILLYBUS is not set
@@ -1697,6 +1718,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_BCM2835=y
+CONFIG_I2C_BRCMSTB=y
 # CONFIG_I2C_CBUS_GPIO is not set
 # CONFIG_I2C_DESIGNWARE_PLATFORM is not set
 # CONFIG_I2C_EMEV2 is not set
@@ -1771,6 +1793,12 @@ CONFIG_SPI_OMAP24XX=y
 # CONFIG_SPI_XCOMM is not set
 # CONFIG_SPI_XILINX is not set
 # CONFIG_SPI_ZYNQMP_GQSPI is not set
+# CONFIG_SPI_AMD is not set
+
+#
+# SPI Multiplexer support
+#
+# CONFIG_SPI_MUX is not set
 
 #
 # SPI Protocol Masters
@@ -1801,6 +1829,7 @@ CONFIG_PPS=y
 CONFIG_PTP_1588_CLOCK=y
 # CONFIG_DP83640_PHY is not set
 # CONFIG_PTP_1588_CLOCK_INES is not set
+# CONFIG_PTP_1588_CLOCK_IDT82P33 is not set
 # CONFIG_PTP_1588_CLOCK_IDTCM is not set
 # end of PTP clock support
 
@@ -1811,7 +1840,6 @@ CONFIG_GENERIC_PINMUX_FUNCTIONS=y
 CONFIG_PINCONF=y
 CONFIG_GENERIC_PINCONF=y
 # CONFIG_DEBUG_PINCTRL is not set
-# CONFIG_PINCTRL_AMD is not set
 # CONFIG_PINCTRL_MCP23S08 is not set
 CONFIG_PINCTRL_SINGLE=y
 # CONFIG_PINCTRL_SX150X is not set
@@ -1822,9 +1850,12 @@ CONFIG_PINCTRL_BCM2835=y
 CONFIG_PINCTRL_IMX=y
 CONFIG_PINCTRL_IMX6Q=y
 CONFIG_PINCTRL_IMX6SX=y
+# CONFIG_PINCTRL_IMX8MM is not set
+# CONFIG_PINCTRL_IMX8MN is not set
+# CONFIG_PINCTRL_IMX8MP is not set
+# CONFIG_PINCTRL_IMX8MQ is not set
 CONFIG_PINCTRL_STM32=y
 CONFIG_PINCTRL_STM32MP157=y
-# CONFIG_PINCTRL_EQUILIBRIUM is not set
 CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIOLIB_FASTPATH_LIMIT=512
@@ -1901,6 +1932,7 @@ CONFIG_GPIO_TWL4030=y
 #
 # end of USB GPIO expanders
 
+# CONFIG_GPIO_AGGREGATOR is not set
 # CONFIG_GPIO_MOCKUP is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_AVS=y
@@ -1923,6 +1955,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_PDA_POWER is not set
 # CONFIG_TEST_POWER is not set
 # CONFIG_CHARGER_ADP5061 is not set
+# CONFIG_BATTERY_CW2015 is not set
 # CONFIG_BATTERY_DS2780 is not set
 # CONFIG_BATTERY_DS2781 is not set
 # CONFIG_BATTERY_DS2782 is not set
@@ -1948,6 +1981,7 @@ CONFIG_POWER_SUPPLY=y
 # CONFIG_BATTERY_GAUGE_LTC2941 is not set
 # CONFIG_CHARGER_RT9455 is not set
 # CONFIG_CHARGER_UCS1002 is not set
+# CONFIG_CHARGER_BD99954 is not set
 # CONFIG_HWMON is not set
 CONFIG_THERMAL=y
 CONFIG_THERMAL_STATISTICS=y
@@ -1969,7 +2003,7 @@ CONFIG_CPU_FREQ_THERMAL=y
 # CONFIG_THERMAL_EMULATION is not set
 # CONFIG_THERMAL_MMIO is not set
 CONFIG_IMX_THERMAL=y
-# CONFIG_QORIQ_THERMAL is not set
+# CONFIG_IMX8MM_THERMAL is not set
 
 #
 # Broadcom thermal drivers
@@ -2021,6 +2055,7 @@ CONFIG_OMAP_WATCHDOG=y
 # CONFIG_MAX63XX_WATCHDOG is not set
 CONFIG_IMX2_WDT=y
 # CONFIG_IMX7ULP_WDT is not set
+# CONFIG_ARM_SMC_WATCHDOG is not set
 CONFIG_STM32_WATCHDOG=y
 CONFIG_STPMIC1_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
@@ -2059,11 +2094,14 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_DA9063 is not set
 # CONFIG_MFD_DA9150 is not set
 # CONFIG_MFD_DLN2 is not set
+# CONFIG_MFD_GATEWORKS_GSC is not set
 # CONFIG_MFD_MC13XXX_SPI is not set
 # CONFIG_MFD_MC13XXX_I2C is not set
+# CONFIG_MFD_MP2629 is not set
 # CONFIG_MFD_HI6421_PMIC is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_HTC_I2CPLD is not set
+# CONFIG_MFD_IQS62X is not set
 # CONFIG_MFD_KEMPLD is not set
 # CONFIG_MFD_88PM800 is not set
 # CONFIG_MFD_88PM805 is not set
@@ -2078,6 +2116,7 @@ CONFIG_MFD_CORE=y
 # CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_MAX8997 is not set
 # CONFIG_MFD_MAX8998 is not set
+# CONFIG_MFD_MT6360 is not set
 # CONFIG_MFD_MT6397 is not set
 # CONFIG_MFD_MENF21BMC is not set
 # CONFIG_EZX_PCAP is not set
@@ -2173,8 +2212,11 @@ CONFIG_REGULATOR_ANATOP=y
 # CONFIG_REGULATOR_MAX8660 is not set
 # CONFIG_REGULATOR_MAX8952 is not set
 # CONFIG_REGULATOR_MAX8973 is not set
+# CONFIG_REGULATOR_MAX77826 is not set
 # CONFIG_REGULATOR_MCP16502 is not set
+# CONFIG_REGULATOR_MP5416 is not set
 # CONFIG_REGULATOR_MP8859 is not set
+# CONFIG_REGULATOR_MP886X is not set
 # CONFIG_REGULATOR_MPQ7920 is not set
 # CONFIG_REGULATOR_MT6311 is not set
 CONFIG_REGULATOR_PALMAS=y
@@ -2205,6 +2247,7 @@ CONFIG_REGULATOR_TPS65217=y
 # CONFIG_REGULATOR_VCTRL is not set
 # CONFIG_REGULATOR_VEXPRESS is not set
 # CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_CEC_SUPPORT is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -2218,11 +2261,6 @@ CONFIG_REGULATOR_TPS65217=y
 #
 # end of ARM devices
 
-#
-# ACP (Audio CoProcessor) Configuration
-#
-# end of ACP (Audio CoProcessor) Configuration
-
 #
 # Frame buffer Devices
 #
@@ -2254,7 +2292,6 @@ CONFIG_HID=y
 # CONFIG_HID_A4TECH is not set
 # CONFIG_HID_ACRUX is not set
 # CONFIG_HID_APPLE is not set
-# CONFIG_HID_ASUS is not set
 # CONFIG_HID_AUREAL is not set
 # CONFIG_HID_BELKIN is not set
 # CONFIG_HID_CHERRY is not set
@@ -2270,6 +2307,7 @@ CONFIG_HID=y
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_GEMBIRD is not set
 # CONFIG_HID_GFRM is not set
+# CONFIG_HID_GLORIOUS is not set
 # CONFIG_HID_KEYTOUCH is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_WALTOP is not set
@@ -2433,8 +2471,10 @@ CONFIG_USB_DWC2_HOST=y
 # CONFIG_USB_DWC2_DEBUG is not set
 # CONFIG_USB_DWC2_TRACK_MISSED_SOFS is not set
 CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_OF=y
 CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_MSM=y
+CONFIG_USB_CHIPIDEA_IMX=y
+CONFIG_USB_CHIPIDEA_GENERIC=y
 # CONFIG_USB_ISP1760 is not set
 
 #
@@ -2456,6 +2496,7 @@ CONFIG_USB_CHIPIDEA_HOST=y
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_APPLE_MFI_FASTCHARGE is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
@@ -2514,8 +2555,8 @@ CONFIG_MMC_SDHCI_ESDHC_IMX=y
 # CONFIG_MMC_SDHCI_F_SDH30 is not set
 # CONFIG_MMC_SDHCI_MILBEAUT is not set
 CONFIG_MMC_SDHCI_IPROC=y
-CONFIG_MMC_OMAP=y
-CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_OMAP_HS is not set
 # CONFIG_MMC_MXC is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MMC_DW is not set
@@ -2523,11 +2564,13 @@ CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_USHC is not set
 # CONFIG_MMC_USDHI6ROL0 is not set
 CONFIG_MMC_CQHCI=y
+# CONFIG_MMC_HSQ is not set
 CONFIG_MMC_BCM2835=y
 # CONFIG_MMC_MTK is not set
 # CONFIG_MMC_SDHCI_XENON is not set
-# CONFIG_MMC_SDHCI_OMAP is not set
+CONFIG_MMC_SDHCI_OMAP=y
 # CONFIG_MMC_SDHCI_AM654 is not set
+CONFIG_MMC_SDHCI_EXTERNAL_DMA=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
@@ -2538,6 +2581,7 @@ CONFIG_LEDS_CLASS=y
 # LED drivers
 #
 # CONFIG_LEDS_AN30259A is not set
+# CONFIG_LEDS_AW2013 is not set
 # CONFIG_LEDS_BCM6328 is not set
 # CONFIG_LEDS_BCM6358 is not set
 # CONFIG_LEDS_CR0014114 is not set
@@ -2771,6 +2815,7 @@ CONFIG_TI_DMA_CROSSBAR=y
 CONFIG_SYNC_FILE=y
 # CONFIG_SW_SYNC is not set
 # CONFIG_UDMABUF is not set
+# CONFIG_DMABUF_MOVE_NOTIFY is not set
 # CONFIG_DMABUF_SELFTESTS is not set
 # CONFIG_DMABUF_HEAPS is not set
 # end of DMABUF options
@@ -2784,6 +2829,10 @@ CONFIG_VIRTIO_MENU=y
 # CONFIG_VIRTIO_INPUT is not set
 CONFIG_VIRTIO_MMIO=y
 # CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set
+# CONFIG_VDPA is not set
+CONFIG_VHOST_MENU=y
+# CONFIG_VHOST_NET is not set
+# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set
 
 #
 # Microsoft Hyper-V guest support
@@ -2796,18 +2845,19 @@ CONFIG_VIRTIO_MMIO=y
 # CONFIG_MFD_CROS_EC is not set
 # CONFIG_CHROME_PLATFORMS is not set
 # CONFIG_MELLANOX_PLATFORM is not set
+CONFIG_HAVE_CLK=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_HAVE_CLK_PREPARE=y
 CONFIG_COMMON_CLK=y
 
 #
-# Common Clock Framework
+# Clock driver for ARM Reference designs
 #
 CONFIG_ICST=y
-CONFIG_COMMON_CLK_VERSATILE=y
 CONFIG_CLK_SP810=y
 CONFIG_CLK_VEXPRESS_OSC=y
-# CONFIG_CLK_HSDK is not set
+# end of Clock driver for ARM Reference designs
+
 # CONFIG_COMMON_CLK_MAX9485 is not set
 # CONFIG_COMMON_CLK_SI5341 is not set
 # CONFIG_COMMON_CLK_SI5351 is not set
@@ -2827,9 +2877,11 @@ CONFIG_COMMON_CLK_STM32MP157=y
 CONFIG_CLK_BCM2835=y
 # CONFIG_CLK_RASPBERRYPI is not set
 CONFIG_MXC_CLK=y
+# CONFIG_CLK_IMX8MM is not set
+# CONFIG_CLK_IMX8MN is not set
+# CONFIG_CLK_IMX8MP is not set
+# CONFIG_CLK_IMX8MQ is not set
 # CONFIG_COMMON_CLK_TI_ADPLL is not set
-# end of Common Clock Framework
-
 CONFIG_HWSPINLOCK=y
 CONFIG_HWSPINLOCK_OMAP=y
 CONFIG_HWSPINLOCK_STM32=y
@@ -2917,6 +2969,7 @@ CONFIG_FSL_GUTS=y
 # i.MX SoC drivers
 #
 # CONFIG_IMX_GPCV2_PM_DOMAINS is not set
+# CONFIG_SOC_IMX8M is not set
 # end of i.MX SoC drivers
 
 #
@@ -2947,6 +3000,7 @@ CONFIG_PM_DEVFREQ=y
 #
 # DEVFREQ Drivers
 #
+# CONFIG_ARM_IMX_BUS_DEVFREQ is not set
 # CONFIG_ARM_IMX8M_DDRC_DEVFREQ is not set
 # CONFIG_PM_DEVFREQ_EVENT is not set
 CONFIG_EXTCON=y
@@ -2973,6 +3027,7 @@ CONFIG_PL353_SMC=y
 # CONFIG_IIO is not set
 CONFIG_PWM=y
 CONFIG_PWM_SYSFS=y
+# CONFIG_PWM_DEBUG is not set
 CONFIG_PWM_BCM2835=y
 # CONFIG_PWM_FSL_FTM is not set
 # CONFIG_PWM_IMX1 is not set
@@ -3013,9 +3068,10 @@ CONFIG_RESET_STM32MP157=y
 #
 CONFIG_GENERIC_PHY=y
 # CONFIG_BCM_KONA_USB2_PHY is not set
-# CONFIG_PHY_CADENCE_DP is not set
+# CONFIG_PHY_CADENCE_TORRENT is not set
 # CONFIG_PHY_CADENCE_DPHY is not set
 # CONFIG_PHY_CADENCE_SIERRA is not set
+# CONFIG_PHY_CADENCE_SALVO is not set
 # CONFIG_PHY_FSL_IMX8MQ_USB is not set
 # CONFIG_PHY_MIXEL_MIPI_DPHY is not set
 # CONFIG_PHY_PXA_28NM_HSIC is not set
@@ -3032,7 +3088,6 @@ CONFIG_PHY_STM32_USBPHYC=y
 # CONFIG_TI_PIPE3 is not set
 # CONFIG_PHY_TUSB1210 is not set
 CONFIG_PHY_TI_GMII_SEL=y
-# CONFIG_PHY_INTEL_EMMC is not set
 # end of PHY Subsystem
 
 # CONFIG_POWERCAP is not set
@@ -3081,6 +3136,7 @@ CONFIG_COUNTER=y
 # CONFIG_STM32_TIMER_CNT is not set
 # CONFIG_TI_EQEP is not set
 # CONFIG_FTM_QUADDEC is not set
+# CONFIG_MOST is not set
 # end of Device Drivers
 
 #
@@ -3138,7 +3194,7 @@ CONFIG_AUTOFS_FS=y
 # end of CD-ROM/DVD Filesystems
 
 #
-# DOS/FAT/NT Filesystems
+# DOS/FAT/EXFAT/NT Filesystems
 #
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
@@ -3146,8 +3202,9 @@ CONFIG_VFAT_FS=y
 CONFIG_FAT_DEFAULT_CODEPAGE=437
 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # CONFIG_FAT_DEFAULT_UTF8 is not set
+# CONFIG_EXFAT_FS is not set
 # CONFIG_NTFS_FS is not set
-# end of DOS/FAT/NT Filesystems
+# end of DOS/FAT/EXFAT/NT Filesystems
 
 #
 # Pseudo filesystems
@@ -3314,6 +3371,7 @@ CONFIG_CRYPTO_CRYPTD=y
 CONFIG_CRYPTO_AUTHENC=y
 # CONFIG_CRYPTO_TEST is not set
 CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_ENGINE=y
 
 #
 # Public-key cryptography
@@ -3482,6 +3540,7 @@ CONFIG_BINARY_PRINTF=y
 #
 # Library routines
 #
+CONFIG_LINEAR_RANGES=y
 # CONFIG_PACKING is not set
 CONFIG_BITREVERSE=y
 CONFIG_HAVE_ARCH_BITREVERSE=y
@@ -3489,6 +3548,7 @@ CONFIG_GENERIC_STRNCPY_FROM_USER=y
 CONFIG_GENERIC_STRNLEN_USER=y
 CONFIG_GENERIC_NET_UTILS=y
 # CONFIG_CORDIC is not set
+# CONFIG_PRIME_NUMBERS is not set
 CONFIG_RATIONAL=y
 CONFIG_GENERIC_PCI_IOMAP=y
 CONFIG_STMP_DEVICE=y
@@ -3565,6 +3625,7 @@ CONFIG_CONSOLE_LOGLEVEL_QUIET=4
 CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
 # CONFIG_BOOT_PRINTK_DELAY is not set
 CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DYNAMIC_DEBUG_CORE=y
 CONFIG_SYMBOLIC_ERRNAME=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # end of printk and dmesg options
@@ -3574,6 +3635,7 @@ CONFIG_SYMBOLIC_ERRNAME=y
 #
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_INFO_REDUCED is not set
+# CONFIG_DEBUG_INFO_COMPRESSED is not set
 # CONFIG_DEBUG_INFO_SPLIT is not set
 # CONFIG_DEBUG_INFO_DWARF4 is not set
 # CONFIG_DEBUG_INFO_BTF is not set
@@ -3583,7 +3645,6 @@ CONFIG_FRAME_WARN=1024
 # CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_READABLE_ASM is not set
 # CONFIG_HEADERS_INSTALL is not set
-CONFIG_OPTIMIZE_INLINING=y
 # CONFIG_DEBUG_SECTION_MISMATCH is not set
 CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
@@ -3595,11 +3656,11 @@ CONFIG_SECTION_MISMATCH_WARN_ONLY=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x10
 CONFIG_MAGIC_SYSRQ_SERIAL=y
+CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE=""
 CONFIG_DEBUG_FS=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_UBSAN is not set
-CONFIG_UBSAN_ALIGNMENT=y
 # end of Generic Kernel Debugging Instruments
 
 CONFIG_DEBUG_KERNEL=y
@@ -3614,6 +3675,7 @@ CONFIG_PAGE_EXTENSION=y
 # CONFIG_PAGE_POISONING is not set
 # CONFIG_DEBUG_PAGE_REF is not set
 # CONFIG_DEBUG_RODATA_TEST is not set
+# CONFIG_DEBUG_WX is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
@@ -3628,6 +3690,7 @@ CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
 # CONFIG_DEBUG_PER_CPU_MAPS is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 CONFIG_CC_HAS_KASAN_GENERIC=y
+CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
 CONFIG_KASAN_STACK=1
 # end of Memory Debugging
 
@@ -3648,6 +3711,7 @@ CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
 # CONFIG_WQ_WATCHDOG is not set
+# CONFIG_TEST_LOCKUP is not set
 # end of Debug Oops, Lockups and Hangs
 
 #
@@ -3730,7 +3794,6 @@ CONFIG_DYNAMIC_FTRACE=y
 CONFIG_DYNAMIC_FTRACE_WITH_REGS=y
 # CONFIG_FUNCTION_PROFILER is not set
 # CONFIG_STACK_TRACER is not set
-# CONFIG_PREEMPTIRQ_EVENTS is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
@@ -3742,6 +3805,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_UPROBE_EVENTS is not set
 CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_SYNTH_EVENTS is not set
 # CONFIG_TRACE_EVENT_INJECT is not set
 # CONFIG_TRACEPOINT_BENCHMARK is not set
 # CONFIG_RING_BUFFER_BENCHMARK is not set
@@ -3758,7 +3822,6 @@ CONFIG_STRICT_DEVMEM=y
 # arm Debugging
 #
 # CONFIG_ARM_PTDUMP_DEBUGFS is not set
-# CONFIG_DEBUG_WX is not set
 # CONFIG_UNWINDER_FRAME_POINTER is not set
 CONFIG_UNWINDER_ARM=y
 CONFIG_ARM_UNWIND=y
@@ -3782,6 +3845,7 @@ CONFIG_CC_HAS_SANCOV_TRACE_PC=y
 CONFIG_RUNTIME_TESTING_MENU=y
 # CONFIG_LKDTM is not set
 # CONFIG_TEST_LIST_SORT is not set
+# CONFIG_TEST_MIN_HEAP is not set
 # CONFIG_TEST_SORT is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_RBTREE_TEST is not set
@@ -3803,6 +3867,7 @@ CONFIG_RUNTIME_TESTING_MENU=y
 # CONFIG_TEST_HASH is not set
 # CONFIG_TEST_IDA is not set
 # CONFIG_TEST_LKM is not set
+# CONFIG_TEST_BITOPS is not set
 # CONFIG_TEST_VMALLOC is not set
 # CONFIG_TEST_USER_COPY is not set
 # CONFIG_TEST_BPF is not set
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 53cad9a..4332513 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -111,8 +111,8 @@ PTXCONF_KERNEL_INSTALL=y
 PTXCONF_KERNEL_MODULES=y
 PTXCONF_KERNEL_MODULES_INSTALL=y
 PTXCONF_KERNEL_MODULES_BUILD="modules"
-PTXCONF_KERNEL_VERSION="5.6.2"
-PTXCONF_KERNEL_MD5="8b96e9e8eff865ff84a23b4f858dafa1"
+PTXCONF_KERNEL_VERSION="5.8"
+PTXCONF_KERNEL_MD5="0e5c4c15266218ef26c50fac0016095b"
 # PTXCONF_KERNEL_IMAGE_BZ is not set
 PTXCONF_KERNEL_IMAGE_Z=y
 # PTXCONF_KERNEL_IMAGE_XIP is not set
-- 
2.20.1


_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de

             reply	other threads:[~2020-08-10 15:27 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-10 15:27 Holger Assmann [this message]
2020-08-10 15:27 ` [DistroKit] [PATCH v2 2/2] platform-v7a: kernel patch to fix PHY warnings Holger Assmann
2020-08-10 15:32   ` Holger Assmann
2020-08-11  8:07   ` Robert Schwebel
2020-08-11  8:07 ` [DistroKit] [PATCH v2 1/2] platform-v7a: kernel version bump 5.6.2 -> 5.8 Robert Schwebel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200810152730.9416-1-h.assmann@pengutronix.de \
    --to=h.assmann@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=distrokit@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox