From: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH v4] v7a: barebox update 2020.09.0 -> 2021.02.0
Date: Sun, 14 Mar 2021 16:47:46 +0100 [thread overview]
Message-ID: <20210314154746.2331014-1-u.kleine-koenig@pengutronix.de> (raw)
One new patch is required to fix a regression for USB on rpi3. Also USB
on rpi3 requires CONFIG_USB_NOP_XCEIV=y now which is enabled in the rpi2
config now.
For the beaglebone two patches are added fixing a regression related to
a dts sync from upstream.
All three patches were already sent to the barebox mailing list.
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
.../platform-v7a/barebox-am335x-mlo.config | 17 ++++----
configs/platform-v7a/barebox-am335x.config | 24 +++++------
.../platform-v7a/barebox-am335x.config.diff | 16 ++------
configs/platform-v7a/barebox-at91.config | 13 +++++-
configs/platform-v7a/barebox-at91.config.diff | 4 +-
configs/platform-v7a/barebox-mx6.config | 29 ++++++++------
configs/platform-v7a/barebox-mx6.config.diff | 20 ++++------
configs/platform-v7a/barebox-rpi2.config | 16 +++++++-
configs/platform-v7a/barebox-rpi2.config.diff | 5 ++-
configs/platform-v7a/barebox-stm32mp.config | 15 ++++++-
.../platform-v7a/barebox-stm32mp.config.diff | 6 +--
configs/platform-v7a/barebox-vexpress.config | 12 +++++-
.../platform-v7a/barebox-vexpress.config.diff | 4 +-
configs/platform-v7a/barebox.config | 12 +++++-
.../bcm283X-Select-OF-clock-providers.patch | 30 ++++++++++++++
.../net-phy-fix-waiting-for-link.patch | 35 ++++++++++++++++
...probe-simple-pm-bus-children-as-well.patch | 40 +++++++++++++++++++
.../patches/barebox-2021.02.0/series | 6 +++
configs/platform-v7a/platformconfig | 4 +-
.../platform-v7a/rules/barebox-stm32mp.make | 2 +-
.../rules/image-stm32mp157c-dk2.make | 2 +-
21 files changed, 234 insertions(+), 78 deletions(-)
create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/series
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index 022d53c045e4..618d8e77bb3a 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -187,6 +187,9 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -248,18 +251,11 @@ CONFIG_MTD_M25P80=y
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
-# CONFIG_NAND_ECC_SOFT is not set
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
+# CONFIG_MTD_NAND_ECC_SOFT is not set
# CONFIG_NAND_ECC_HW_SYNDROME is not set
-# CONFIG_NAND_ECC_HW_NONE is not set
-# CONFIG_NAND_INFO is not set
-# CONFIG_NAND_BBT is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_OMAP_ELM is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -290,6 +286,7 @@ CONFIG_MCI=y
# CONFIG_MCI_STARTUP is not set
# CONFIG_MCI_WRITE is not set
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index a43071027572..d959c499b75a 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -213,6 +213,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -238,6 +239,9 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -267,6 +271,7 @@ CONFIG_CMD_VERSION=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_MMC_EXTCSD is not set
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -305,6 +310,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -384,6 +390,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -397,7 +404,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LED=y
CONFIG_CMD_NAND=y
-# CONFIG_CMD_NANDTEST is not set
# CONFIG_CMD_NAND_BITFLIP is not set
# CONFIG_CMD_POWEROFF is not set
CONFIG_CMD_SPI=y
@@ -439,6 +445,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -558,20 +565,12 @@ CONFIG_MTD_M25P80=y
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
-CONFIG_NAND_ECC_SOFT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
+# CONFIG_MTD_NAND_ECC_SOFT is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_HW_NONE=y
-CONFIG_NAND_INFO=y
-CONFIG_NAND_READ_OOB=y
-CONFIG_NAND_BBT=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_OMAP_GPMC=y
# CONFIG_MTD_NAND_OMAP_ELM is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -629,6 +628,7 @@ CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index e944803f8d0b..75d489722ecf 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
# CONFIG_AM33XX_NET_BOOT is not set
CONFIG_ARCH_AM33XX=y
# CONFIG_ARCH_BCM283X is not set
@@ -22,10 +22,10 @@ CONFIG_CLOCKSOURCE_TI_DM=y
# CONFIG_CMD_KEYSTORE is not set
CONFIG_CMD_MIITOOL=y
CONFIG_CMD_NAND=y
-# CONFIG_CMD_NANDTEST is not set
# CONFIG_CMD_NAND_BITFLIP is not set
# CONFIG_CMD_SMC is undefined
# CONFIG_COMMON_CLK is undefined
+# CONFIG_COMMON_CLK_OF_PROVIDER is undefined
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_NONE=y
CONFIG_CRYPTO_KEYSTORE=y
@@ -69,24 +69,16 @@ CONFIG_MACH_BEAGLEBONE=y
CONFIG_MCI_OMAP_HSMMC=y
CONFIG_MTD_M25P80=y
# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_OMAP_ELM is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
# CONFIG_MTD_SST25L is not set
CONFIG_NAND=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
-CONFIG_NAND_BBT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-CONFIG_NAND_ECC_HW_NONE=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_SOFT=y
-CONFIG_NAND_INFO=y
CONFIG_NAND_OMAP_GPMC=y
-CONFIG_NAND_READ_OOB=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_OMAP_BUILD_IFT is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index 48d48fe086f4..127b79f21e47 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -214,6 +214,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -233,6 +234,9 @@ CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -263,6 +267,7 @@ CONFIG_CMD_VERSION=y
# CONFIG_CMD_MMC is not set
# CONFIG_CMD_MMC_EXTCSD is not set
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -302,6 +307,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -381,6 +387,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -431,6 +438,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -577,6 +585,7 @@ CONFIG_MCI=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
@@ -730,6 +739,8 @@ CONFIG_REGULATOR_FIXED=y
# NVME Support
#
# end of NVME Support
+
+# CONFIG_SYSCON_REBOOT_MODE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index 3f636d86a633..3fa0142d83bd 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_TEXT_BASE=0x23f00000
@@ -21,7 +21,6 @@ CONFIG_CMD_MENU_MANAGEMENT=y
# CONFIG_CMD_USB is undefined
# CONFIG_CMD_USBGADGET is undefined
CONFIG_COMMON_CLK_AT91=y
-CONFIG_COMMON_CLK_OF_PROVIDER=y
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
CONFIG_DEFAULT_COMPRESSION_BZIP2=y
@@ -99,6 +98,7 @@ CONFIG_SOC_SAMA5D2=y
CONFIG_SPI_ATMEL_QUADSPI=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MEM=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
# CONFIG_THUMB2_BAREBOX is undefined
# CONFIG_USB is undefined
# CONFIG_USBGADGET_START is undefined
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 13400907e6d0..8af1a2a0fdf0 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -118,6 +118,8 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_PHYTEC_SOM_IMX8MQ is not set
# CONFIG_MACH_GRINN_LITEBOARD is not set
# CONFIG_MACH_DIGI_CCIMX6ULSBCPRO is not set
+# CONFIG_MACH_WEBASTO_CCBV2 is not set
+# CONFIG_MACH_MNT_REFORM is not set
#
# Board specific settings
@@ -279,6 +281,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -304,6 +307,9 @@ CONFIG_DEBUG_IMX_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -333,6 +339,7 @@ CONFIG_CMD_VERSION=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MMC_EXTCSD=y
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -373,6 +380,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -454,6 +462,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -468,7 +477,6 @@ CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_LED=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_NANDTEST=y
# CONFIG_CMD_NAND_BITFLIP is not set
# CONFIG_CMD_POWEROFF is not set
CONFIG_CMD_SPI=y
@@ -510,6 +518,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -634,20 +643,12 @@ CONFIG_MTD_SST25L=y
# CONFIG_DRIVER_CFI is not set
CONFIG_NAND=y
-CONFIG_NAND_ECC_SOFT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
+# CONFIG_MTD_NAND_ECC_SOFT is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_HW_NONE=y
-CONFIG_NAND_INFO=y
-CONFIG_NAND_READ_OOB=y
-CONFIG_NAND_BBT=y
CONFIG_NAND_ALLOW_ERASE_BAD=y
CONFIG_NAND_IMX=y
CONFIG_NAND_MXS=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_DENALI is not set
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -714,6 +715,7 @@ CONFIG_VIDEO_VPL=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
# CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set
+# CONFIG_DRIVER_VIDEO_BOCHS_ISA is not set
CONFIG_DRIVER_VIDEO_SIMPLEFB=y
# CONFIG_DRIVER_VIDEO_EDID is not set
# CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
@@ -733,6 +735,7 @@ CONFIG_MCI=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
@@ -913,6 +916,8 @@ CONFIG_USB_NOP_XCEIV=y
# NVME Support
#
# end of NVME Support
+
+# CONFIG_SYSCON_REBOOT_MODE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 3c04319ba252..58450f94a7c0 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_FEC_IMX=y
CONFIG_ARCH_HAS_IMX_GPT=y
@@ -26,13 +26,11 @@ CONFIG_CLOCKSOURCE_IMX_GPT=y
CONFIG_CMD_MIITOOL=y
CONFIG_CMD_MMC_EXTCSD=y
CONFIG_CMD_NAND=y
-CONFIG_CMD_NANDTEST=y
# CONFIG_CMD_NAND_BITFLIP is not set
# CONFIG_CMD_SMC is undefined
CONFIG_CMD_SPLASH=y
CONFIG_CMD_UBI=y
CONFIG_CMD_UBIFORMAT=y
-CONFIG_COMMON_CLK_OF_PROVIDER=y
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_NONE=y
CONFIG_CRYPTO_KEYSTORE=y
@@ -52,6 +50,7 @@ CONFIG_DRIVER_SERIAL_IMX=y
CONFIG_DRIVER_SPI_IMX=y
CONFIG_DRIVER_SPI_IMX_2_3=y
# CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
+# CONFIG_DRIVER_VIDEO_BOCHS_ISA is not set
# CONFIG_DRIVER_VIDEO_EDID is not set
# CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
@@ -115,6 +114,7 @@ CONFIG_MACH_EMBEST_RIOTBOARD=y
# CONFIG_MACH_GW_VENTANA is not set
# CONFIG_MACH_KINDLE_MX50 is not set
# CONFIG_MACH_KONTRON_SAMX6I is not set
+# CONFIG_MACH_MNT_REFORM is not set
CONFIG_MACH_NITROGEN6=y
# CONFIG_MACH_NXP_IMX6ULL_EVK is not set
# CONFIG_MACH_NXP_IMX8MM_EVK is not set
@@ -148,6 +148,7 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_VARISCITE_MX6 is not set
# CONFIG_MACH_VF610_TWR is not set
# CONFIG_MACH_WARP7 is not set
+# CONFIG_MACH_WEBASTO_CCBV2 is not set
# CONFIG_MACH_ZII_IMX7D_DEV is not set
# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
# CONFIG_MACH_ZII_RDU1 is not set
@@ -167,8 +168,8 @@ CONFIG_MTD_DATAFLASH=y
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
CONFIG_MTD_M25P80=y
# CONFIG_MTD_NAND_DENALI is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_ECC_SOFT is not set
+# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
CONFIG_MTD_RAW_DEVICE=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -181,17 +182,9 @@ CONFIG_MTD_UBI_FASTMAP=y
CONFIG_MXS_APBH_DMA=y
CONFIG_NAND=y
CONFIG_NAND_ALLOW_ERASE_BAD=y
-CONFIG_NAND_BBT=y
-# CONFIG_NAND_ECC_BCH is not set
-CONFIG_NAND_ECC_HW=y
-CONFIG_NAND_ECC_HW_NONE=y
-# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
CONFIG_NAND_ECC_HW_SYNDROME=y
-CONFIG_NAND_ECC_SOFT=y
CONFIG_NAND_IMX=y
-CONFIG_NAND_INFO=y
CONFIG_NAND_MXS=y
-CONFIG_NAND_READ_OOB=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
CONFIG_PARTITION_DISK_EFI=y
@@ -217,6 +210,7 @@ CONFIG_RESET_IMX_SRC=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MEM=y
CONFIG_STMP_DEVICE=y
+# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_THUMB2_BAREBOX=y
CONFIG_UBIFORMAT=y
CONFIG_USB_GADGET_DFU=y
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 9e73e9ee877a..4535c2963577 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -202,6 +202,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -219,6 +220,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -248,6 +252,7 @@ CONFIG_CMD_VERSION=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_MMC_EXTCSD is not set
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -286,6 +291,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -365,6 +371,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -416,6 +423,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -562,6 +570,7 @@ CONFIG_MCI=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
@@ -575,6 +584,7 @@ CONFIG_MCI_BCM283X_SDHOST=y
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
#
# Clocksource
@@ -686,7 +696,9 @@ CONFIG_REGULATOR_BCM283X=y
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# end of Firmware Drivers
-# CONFIG_GENERIC_PHY is not set
+CONFIG_GENERIC_PHY=y
+CONFIG_USB_NOP_XCEIV=y
+# CONFIG_PHY_FSL_IMX8MQ_USB is not set
# CONFIG_CRYPTO_HW is not set
#
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 4ca4bd22ca09..98f09156371d 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_BOOTM_INITRD=y
# CONFIG_CMD_I2C is undefined
@@ -8,6 +8,7 @@ CONFIG_DRIVER_SERIAL_NS16550=y
# CONFIG_EEPROM_93XX46 is not set
# CONFIG_EEPROM_AT24 is undefined
# CONFIG_FILE_LIST is undefined
+CONFIG_GENERIC_PHY=y
# CONFIG_GPIO_PCA953X is undefined
# CONFIG_GPIO_PCF857X is undefined
CONFIG_GPIO_RASPBERRYPI_EXP=y
@@ -43,6 +44,7 @@ CONFIG_NET_NETCONSOLE=y
CONFIG_NVMEM=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
# CONFIG_PBL_OPTEE is undefined
+# CONFIG_PHY_FSL_IMX8MQ_USB is not set
CONFIG_PINCTRL_BCM283X=y
CONFIG_PROMPT="R-Pi> "
CONFIG_SERIAL_AMBA_PL011=y
@@ -58,5 +60,6 @@ CONFIG_USB_DWC2_HOST=y
# CONFIG_USB_GADGET_FASTBOOT is undefined
# CONFIG_USB_GADGET_SERIAL is undefined
# CONFIG_USB_HUB_USB251XB is undefined
+CONFIG_USB_NOP_XCEIV=y
CONFIG_USB_OTGDEV=y
CONFIG_WATCHDOG_BCM2835=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
index 10df8b08857a..b64fedbd221e 100644
--- a/configs/platform-v7a/barebox-stm32mp.config
+++ b/configs/platform-v7a/barebox-stm32mp.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -52,7 +52,7 @@ CONFIG_CPU_32v7=y
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_ARCH_NR_GPIO=416
CONFIG_ARCH_STM32MP157=y
-CONFIG_MACH_STM32MP157C_DK2=y
+CONFIG_MACH_STM32MP15XX_DKX=y
CONFIG_MACH_LXA_MC1=y
# CONFIG_MACH_SEEED_ODYSSEY is not set
# CONFIG_BOARD_ARM_GENERIC_DT is not set
@@ -198,6 +198,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -215,6 +216,9 @@ CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -244,6 +248,7 @@ CONFIG_CMD_VERSION=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MMC_EXTCSD=y
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -282,6 +287,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -361,6 +367,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -410,6 +417,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -524,6 +532,7 @@ CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
@@ -684,6 +693,8 @@ CONFIG_RESET_STM32=y
# NVME Support
#
# end of NVME Support
+
+# CONFIG_SYSCON_REBOOT_MODE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index 4b1564f9cb7a..3212fc145b9c 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_NR_GPIO=416
@@ -30,7 +30,6 @@ CONFIG_CMD_POWEROFF=y
# CONFIG_CMD_SPI is undefined
# CONFIG_CMD_USB is undefined
# CONFIG_CMD_USBGADGET is undefined
-CONFIG_COMMON_CLK_OF_PROVIDER=y
CONFIG_COMPILE_LOGLEVEL=6
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_NONE=y
@@ -69,7 +68,7 @@ CONFIG_MACH_LXA_MC1=y
# CONFIG_MACH_RPI_CM3 is undefined
# CONFIG_MACH_RPI_COMMON is undefined
# CONFIG_MACH_SEEED_ODYSSEY is not set
-CONFIG_MACH_STM32MP157C_DK2=y
+CONFIG_MACH_STM32MP15XX_DKX=y
# CONFIG_MCI_BCM283X is undefined
# CONFIG_MCI_BCM283X_SDHOST is undefined
# CONFIG_MCI_MMCI is not set
@@ -126,6 +125,7 @@ CONFIG_STM32_BSEC=y
CONFIG_STM32_IWDG_WATCHDOG=y
CONFIG_STM32_REMOTEPROC=y
# CONFIG_STPMIC1_WATCHDOG is not set
+# CONFIG_SYSCON_REBOOT_MODE is not set
CONFIG_THUMB2_BAREBOX=y
# CONFIG_USB is undefined
# CONFIG_USBGADGET_START is undefined
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index d50789871a8c..1765134bac45 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -51,6 +51,7 @@ CONFIG_CPU_32v7=y
CONFIG_ARCH_TEXT_BASE=0x0
CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_MACH_VEXPRESS=y
+# CONFIG_MACH_VIRT is not set
CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
@@ -190,6 +191,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -208,6 +210,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -237,6 +242,7 @@ CONFIG_CMD_VERSION=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_MMC_EXTCSD is not set
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -275,6 +281,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -354,6 +361,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -405,6 +413,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -571,6 +580,7 @@ CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index ac5b99af308f..211256bd7d71 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-e6072dae533833bfa758a60d8e3b92b6
+550b611f7e000b2105486cbceddb2144
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
@@ -9,7 +9,6 @@ CONFIG_BOOTM_INITRD=y
# CONFIG_CLOCKSOURCE_BCM283X is undefined
# CONFIG_CMD_GPIO is undefined
# CONFIG_CMD_SMC is undefined
-CONFIG_COMMON_CLK_OF_PROVIDER=y
CONFIG_CONSOLE_ACTIVATE_ALL=y
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_DRIVER_CFI=y
@@ -47,6 +46,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_MACH_RPI_CM3 is undefined
# CONFIG_MACH_RPI_COMMON is undefined
CONFIG_MACH_VEXPRESS=y
+# CONFIG_MACH_VIRT is not set
# CONFIG_MCI_BCM283X is undefined
# CONFIG_MCI_BCM283X_SDHOST is undefined
# CONFIG_MDIO_BUS_MUX_GPIO is undefined
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index bbe7f3e51986..fd9da0519224 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.09.0 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -203,6 +203,7 @@ CONFIG_STATE=y
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
# CONFIG_MACHINE_ID is not set
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -221,6 +222,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -250,6 +254,7 @@ CONFIG_CMD_VERSION=y
CONFIG_CMD_MMC=y
# CONFIG_CMD_MMC_EXTCSD is not set
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -288,6 +293,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -367,6 +373,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -420,6 +427,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -584,6 +592,7 @@ CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
# CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
@@ -597,6 +606,7 @@ CONFIG_MCI_MMCI=y
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_OF_PROVIDER=y
#
# Clocksource
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch b/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
new file mode 100644
index 000000000000..8b08428d8c51
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
@@ -0,0 +1,30 @@
+From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
+Date: Thu, 11 Mar 2021 13:10:47 +0100
+Subject: [PATCH] bcm283X: Select OF clock providers
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This makes available the fixed clock needed on rpi3 for USB.
+
+USB stopped working when the dwc driver started to require an otg clock.
+
+Fixes: f73ca701bb85 ("usb: dwc2: add clk dependency for probe via oftree")
+Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
+Link: https://lore.pengutronix.de/20210312133030.521569-1-u.kleine-koenig@pengutronix.de
+---
+ arch/arm/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
+index ab0bf030131c..f9be9d42ecff 100644
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -44,6 +44,7 @@ config ARCH_BCM283X
+ select GPIOLIB
+ select CLKDEV_LOOKUP
+ select COMMON_CLK
++ select COMMON_CLK_OF_PROVIDER
+ select CLOCKSOURCE_BCM283X
+ select ARM_AMBA
+ select HAS_DEBUG_LL
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch b/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
new file mode 100644
index 000000000000..cf4279860c6e
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
@@ -0,0 +1,35 @@
+From: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Fri, 12 Mar 2021 11:13:09 +0100
+Subject: [PATCH] net: phy: fix waiting for link
+
+phydev->adjust_link() is called only from phy_update_status() when the
+link status changes during that function. phydev->link is also updated
+in genphy_update_link() called from phy_wait_aneg_done(), so it can
+happen that phydev->link changes outside of phy_update_status(), thus
+phydev->adjust_link is never called and no link change notice is
+printed.
+
+Instead of calling genphy_update_link() from phy_wait_aneg_done(), call
+phy_update_status(). This makes sure that a link change is properly
+noticed.
+
+Fixes: 8f75aa496dcb ("net: reply to ping requests")
+Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+Link: https://lore.pengutronix.de/20210312101309.29650-1-s.hauer@pengutronix.de
+---
+ drivers/net/phy/phy.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
+index 622acbe40dd9..e8e8dad5bd25 100644
+--- a/drivers/net/phy/phy.c
++++ b/drivers/net/phy/phy.c
+@@ -571,7 +571,7 @@ int phy_wait_aneg_done(struct phy_device *phydev)
+ }
+
+ do {
+- genphy_update_link(phydev);
++ phy_update_status(phydev);
+ if (phydev->link == 1)
+ return 0;
+ } while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND));
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch b/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
new file mode 100644
index 000000000000..787366640b99
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
@@ -0,0 +1,40 @@
+From: Ahmad Fatoum <a.fatoum@pengutronix.de>
+Date: Fri, 12 Mar 2021 08:27:46 +0100
+Subject: [PATCH] of: base: probe simple-pm-bus children as well
+
+Upstream is migrating device trees like those of the am33xx to use
+simple-pm-bus, where applicable. These are buses that reference a clock
+or a power domain that needs to be enabled in order to use devices on it.
+
+As we didn't yet support this binding, this broke the Beaglebone
+and all other am33xx board since v2021.02.0.
+
+Fix this by adding simple-pm-bus to the of_default_bus_match_table.
+Note that this is only an adequate solution for when the power domain
+and clocks referenced are already enabled prior to barebox startup.
+
+For all other cases, driver support must be available for the clock
+and power domains in questions and this driver must be extended to
+make use of them. For the am33xx, the relevant buses are powered
+and clocked on boot up, so we leave general support to another day..
+
+Fixes: 6ea3de1b8ce7 ("dts: update to v5.11-rc1")
+Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
+Link: https://lore.pengutronix.de/20210312082218.17058-1-a.fatoum@pengutronix.de
+---
+ drivers/of/base.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/drivers/of/base.c b/drivers/of/base.c
+index 8759099d7480..6fe02649ee53 100644
+--- a/drivers/of/base.c
++++ b/drivers/of/base.c
+@@ -2272,6 +2272,8 @@ const char *of_get_model(void)
+ const struct of_device_id of_default_bus_match_table[] = {
+ {
+ .compatible = "simple-bus",
++ }, {
++ .compatible = "simple-pm-bus",
+ }, {
+ .compatible = "simple-mfd",
+ }, {
diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/series b/configs/platform-v7a/patches/barebox-2021.02.0/series
new file mode 100644
index 000000000000..0654fa5ec638
--- /dev/null
+++ b/configs/platform-v7a/patches/barebox-2021.02.0/series
@@ -0,0 +1,6 @@
+# generated by git-ptx-patches
+#tag:base --start-number 1
+of-base-probe-simple-pm-bus-children-as-well.patch
+net-phy-fix-waiting-for-link.patch
+bcm283X-Select-OF-clock-providers.patch
+# ad5056773d1eb319e6b321f55c67cc0c - git-ptx-patches magic
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 9145bb8e4a08..2ef8b8e87b61 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -176,8 +176,8 @@ PTXCONF_CONSOLE_SPEED="115200"
# PTXCONF_AT91BOOTSTRAP2 is not set
PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2020.09.0"
-PTXCONF_BAREBOX_COMMON_MD5="907dc813298fcded06fa9c788d3fb6c8"
+PTXCONF_BAREBOX_COMMON_VERSION="2021.02.0"
+PTXCONF_BAREBOX_COMMON_MD5="07045e34faa1135d9cd18503186b2d7f"
PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
PTXCONF_BAREBOX_AM335X_MLO=y
PTXCONF_BAREBOX_AM335X=y
diff --git a/configs/platform-v7a/rules/barebox-stm32mp.make b/configs/platform-v7a/rules/barebox-stm32mp.make
index 82a3c3178f66..2ad1fa4d02b6 100644
--- a/configs/platform-v7a/rules/barebox-stm32mp.make
+++ b/configs/platform-v7a/rules/barebox-stm32mp.make
@@ -43,7 +43,7 @@ BAREBOX_STM32MP_MAKE_ENV := $(BAREBOX_STM32MP_CONF_ENV)
BAREBOX_STM32MP_MAKE_OPT := $(BAREBOX_STM32MP_CONF_OPT)
BAREBOX_STM32MP_IMAGES := \
- images/barebox-stm32mp157c-dk2.img \
+ images/barebox-stm32mp15xx-dkx.img \
images/barebox-stm32mp157c-lxa-mc1.img
BAREBOX_STM32MP_IMAGES := $(addprefix $(BAREBOX_STM32MP_DIR)/,$(BAREBOX_STM32MP_IMAGES))
diff --git a/configs/platform-v7a/rules/image-stm32mp157c-dk2.make b/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
index 2c739d388c93..7c0f4424936a 100644
--- a/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
+++ b/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
@@ -13,7 +13,7 @@ IMAGE_PACKAGES-$(PTXCONF_IMAGE_STM32MP157C_DK2) += image-stm32mp157c-dk2
IMAGE_STM32MP157C_DK2_ENV := \
STM32MP_BOARD_FSBL=stm32mp157c-dk2 \
- STM32MP_BOARD_SSBL=stm32mp157c-dk2
+ STM32MP_BOARD_SSBL=stm32mp15xx-dkx
#
# Paths and names
--
2.30.1
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
next reply other threads:[~2021-03-14 15:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-14 15:47 Uwe Kleine-König [this message]
2021-03-15 9:13 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210314154746.2331014-1-u.kleine-koenig@pengutronix.de \
--to=u.kleine-koenig@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox