* [DistroKit] [PATCH] v8a/imx8m: barebox: Version bump: 2020.08.1 -> 2021.02.0
@ 2021-03-16 10:19 Uwe Kleine-König
2021-03-16 11:01 ` Robert Schwebel
0 siblings, 1 reply; 2+ messages in thread
From: Uwe Kleine-König @ 2021-03-16 10:19 UTC (permalink / raw)
To: distrokit
This gets rid of all patches, they are included in 2020.09.0.
---
configs/platform-v8a/barebox-imx8m.config | 19 +-
...RM-nxp-imx8mm-evk-always-set-up-UART.patch | 46 -----
...art-setup-function-name-more-generic.patch | 54 -----
...ARM-i.MX8M-boards-always-set-up-UART.patch | 185 ------------------
.../0004-clk-imx8mm-fix-CPU-clock.patch | 53 -----
...-Release-v2020.08.1-imx8m-20200821-1.patch | 21 --
.../patches/barebox-2020.08.1/series | 14 --
configs/platform-v8a/rules/barebox-imx8m.make | 4 +-
8 files changed, 19 insertions(+), 377 deletions(-)
delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0001-ARM-nxp-imx8mm-evk-always-set-up-UART.patch
delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0002-ARM-imx8m-Make-uart-setup-function-name-more-generic.patch
delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0003-ARM-i.MX8M-boards-always-set-up-UART.patch
delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0004-clk-imx8mm-fix-CPU-clock.patch
delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0101-Release-v2020.08.1-imx8m-20200821-1.patch
delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/series
diff --git a/configs/platform-v8a/barebox-imx8m.config b/configs/platform-v8a/barebox-imx8m.config
index 2f6c71d93f15..33c992ae1540 100644
--- a/configs/platform-v8a/barebox-imx8m.config
+++ b/configs/platform-v8a/barebox-imx8m.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2020.08.1-20200821-1 Configuration
+# Barebox/arm 2021.02.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -103,6 +103,7 @@ CONFIG_IMX_MULTI_BOARDS=y
# CONFIG_MACH_CM_FX6 is not set
# CONFIG_MACH_ADVANTECH_ROM_742X is not set
# CONFIG_MACH_WARP7 is not set
+# CONFIG_MACH_AC_SXB is not set
# CONFIG_MACH_VF610_TWR is not set
# CONFIG_MACH_ZII_RDU1 is not set
# CONFIG_MACH_ZII_RDU2 is not set
@@ -118,6 +119,8 @@ CONFIG_MACH_NXP_IMX8MQ_EVK=y
CONFIG_MACH_PHYTEC_SOM_IMX8MQ=y
# CONFIG_MACH_GRINN_LITEBOARD is not set
# CONFIG_MACH_DIGI_CCIMX6ULSBCPRO is not set
+# CONFIG_MACH_WEBASTO_CCBV2 is not set
+# CONFIG_MACH_MNT_REFORM is not set
#
# Board specific settings
@@ -267,6 +270,7 @@ CONFIG_POLLER=y
# CONFIG_STATE is not set
# CONFIG_BOOTCHOOSER is not set
CONFIG_RESET_SOURCE=y
+# CONFIG_SYSTEMD_OF_WATCHDOG is not set
#
# OP-TEE loading
@@ -293,6 +297,9 @@ CONFIG_DEBUG_IMX_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_UBSAN is not set
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_CC_HAS_KASAN_GENERIC=y
+# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
# end of Debugging
@@ -321,6 +328,7 @@ CONFIG_CMD_VERSION=y
# CONFIG_CMD_MMC is not set
CONFIG_CMD_MMC_EXTCSD=y
# CONFIG_CMD_POLLER is not set
+# CONFIG_CMD_SLICE is not set
# end of Information
#
@@ -357,6 +365,7 @@ CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_SETENV=y
# end of Environment
#
@@ -436,6 +445,7 @@ CONFIG_CMD_MEMCMP=y
CONFIG_CMD_MEMCPY=y
CONFIG_CMD_MEMSET=y
CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_MEMTESTER is not set
CONFIG_CMD_MM=y
CONFIG_CMD_MW=y
# end of Memory
@@ -489,6 +499,7 @@ CONFIG_NET_RESOLV=y
CONFIG_NET_IFUP=y
CONFIG_NET_DHCP=y
# CONFIG_NET_SNTP is not set
+# CONFIG_NET_FASTBOOT is not set
#
# Drivers
@@ -634,9 +645,10 @@ CONFIG_USB=y
CONFIG_USB_HOST=y
CONFIG_USB_IMX_CHIPIDEA=y
CONFIG_USB_IMX_CHIPIDEA_USBMISC=y
+# CONFIG_USB_DWC2_HOST is not set
+# CONFIG_USB_DWC2_GADGET is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_EHCI is not set
-# CONFIG_USB_DWC2_HOST is not set
# CONFIG_USB_XHCI is not set
# CONFIG_USB_ULPI is not set
CONFIG_USB_OTGDEV=y
@@ -670,6 +682,7 @@ CONFIG_MCI=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
+# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
#
# --- MCI host drivers ---
@@ -709,6 +722,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_TWL6030 is not set
CONFIG_RAVE_SP_CORE=y
# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_ATMEL_FLEXCOM is not set
# end of Multifunction device drivers
#
@@ -944,6 +958,7 @@ CONFIG_PRINTF_UUID=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
#
diff --git a/configs/platform-v8a/patches/barebox-2020.08.1/0001-ARM-nxp-imx8mm-evk-always-set-up-UART.patch b/configs/platform-v8a/patches/barebox-2020.08.1/0001-ARM-nxp-imx8mm-evk-always-set-up-UART.patch
deleted file mode 100644
index 377b2f6ff0af..000000000000
--- a/configs/platform-v8a/patches/barebox-2020.08.1/0001-ARM-nxp-imx8mm-evk-always-set-up-UART.patch
+++ /dev/null
@@ -1,46 +0,0 @@
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Tue, 11 Aug 2020 11:43:29 +0200
-Subject: [PATCH] ARM: nxp-imx8mm-evk: always set up UART
-
-When the TF-A is configured to have some output on the UART it does not
-set up the UART on its own, but just expects a pre-existing configuration.
-If Barebox did not set up the UART in the !DEBUG_LL case, TF-A will just
-hang without any user accessible debug output, which is a very non-obvious
-failure, so better be safe and always set up the UART in case TF-A wants
-to use it.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- arch/arm/boards/nxp-imx8mm-evk/lowlevel.c | 10 ++++++----
- 1 file changed, 6 insertions(+), 4 deletions(-)
-
-diff --git a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-index cd1f7d168bc6..082aefb8c1c5 100644
---- a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-+++ b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-@@ -32,9 +32,12 @@ static void setup_uart(void)
-
- imx8mm_setup_pad(IMX8MM_PAD_UART2_TXD_UART2_TX | UART_PAD_CTRL);
-
-- imx8m_uart_setup_ll();
-+ imx8mq_uart_setup((void *)MX8M_UART2_BASE_ADDR);
-
-- putc_ll('>');
-+ if (IS_ENABLED(CONFIG_DEBUG_LL)) {
-+ imx8m_uart_setup_ll();
-+ putc_ll('>');
-+ }
- }
-
- static void pmic_reg_write(void *i2c, int reg, uint8_t val)
-@@ -157,8 +160,7 @@ static void start_atf(void)
- */
- static __noreturn noinline void nxp_imx8mm_evk_start(void)
- {
-- if (IS_ENABLED(CONFIG_DEBUG_LL))
-- setup_uart();
-+ setup_uart();
-
- start_atf();
-
diff --git a/configs/platform-v8a/patches/barebox-2020.08.1/0002-ARM-imx8m-Make-uart-setup-function-name-more-generic.patch b/configs/platform-v8a/patches/barebox-2020.08.1/0002-ARM-imx8m-Make-uart-setup-function-name-more-generic.patch
deleted file mode 100644
index 4c7885a93a43..000000000000
--- a/configs/platform-v8a/patches/barebox-2020.08.1/0002-ARM-imx8m-Make-uart-setup-function-name-more-generic.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From: Sascha Hauer <s.hauer@pengutronix.de>
-Date: Fri, 21 Aug 2020 06:21:46 +0200
-Subject: [PATCH] ARM: imx8m: Make uart setup function name more generic
-
-So far all i.MX8M variants have the same UART base addresses, so let's
-be optimistic that it stays like that and rename imx8mq_uart_setup() to
-imx8m_uart_setup().
-
-Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- arch/arm/boards/nxp-imx8mm-evk/lowlevel.c | 2 +-
- arch/arm/mach-imx/include/mach/debug_ll.h | 2 +-
- include/serial/imx-uart.h | 2 +-
- 3 files changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-index 082aefb8c1c5..96b78d2c6695 100644
---- a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-+++ b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-@@ -32,7 +32,7 @@ static void setup_uart(void)
-
- imx8mm_setup_pad(IMX8MM_PAD_UART2_TXD_UART2_TX | UART_PAD_CTRL);
-
-- imx8mq_uart_setup((void *)MX8M_UART2_BASE_ADDR);
-+ imx8m_uart_setup((void *)MX8M_UART2_BASE_ADDR);
-
- if (IS_ENABLED(CONFIG_DEBUG_LL)) {
- imx8m_uart_setup_ll();
-diff --git a/arch/arm/mach-imx/include/mach/debug_ll.h b/arch/arm/mach-imx/include/mach/debug_ll.h
-index f2114d50e91e..3217fc1c32f6 100644
---- a/arch/arm/mach-imx/include/mach/debug_ll.h
-+++ b/arch/arm/mach-imx/include/mach/debug_ll.h
-@@ -105,7 +105,7 @@ static inline void imx8m_uart_setup_ll(void)
- {
- void *base = IOMEM(IMX_UART_BASE(IMX_DEBUG_SOC,
- CONFIG_DEBUG_IMX_UART_PORT));
-- imx8mq_uart_setup(base);
-+ imx8m_uart_setup(base);
- }
-
- static inline void PUTC_LL(int c)
-diff --git a/include/serial/imx-uart.h b/include/serial/imx-uart.h
-index 23cee26fcfb0..c0a03ac05401 100644
---- a/include/serial/imx-uart.h
-+++ b/include/serial/imx-uart.h
-@@ -201,7 +201,7 @@ static inline void imx7_uart_setup(void __iomem *uartbase)
- imx_uart_setup(uartbase, 24000000);
- }
-
--static inline void imx8mq_uart_setup(void __iomem *uartbase)
-+static inline void imx8m_uart_setup(void __iomem *uartbase)
- {
- imx_uart_setup(uartbase, 25000000);
- }
diff --git a/configs/platform-v8a/patches/barebox-2020.08.1/0003-ARM-i.MX8M-boards-always-set-up-UART.patch b/configs/platform-v8a/patches/barebox-2020.08.1/0003-ARM-i.MX8M-boards-always-set-up-UART.patch
deleted file mode 100644
index 77c5a40f8ca0..000000000000
--- a/configs/platform-v8a/patches/barebox-2020.08.1/0003-ARM-i.MX8M-boards-always-set-up-UART.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-From: Sascha Hauer <s.hauer@pengutronix.de>
-Date: Fri, 21 Aug 2020 06:18:43 +0200
-Subject: [PATCH] ARM: i.MX8M boards: always set up UART
-
-Quoting Lucas on b96cc34f91 ("ARM: nxp-imx8mm-evk: always set up UART"):
-
-| When the TF-A is configured to have some output on the UART it does not
-| set up the UART on its own, but just expects a pre-existing configuration.
-| If Barebox did not set up the UART in the !DEBUG_LL case, TF-A will just
-| hang without any user accessible debug output, which is a very non-obvious
-| failure, so better be safe and always set up the UART in case TF-A wants
-| to use it.
-
-This patch adopts this for all i.MX8M boards and makes the early UART
-setup consistent across all of them. We also add pbl_set_putc() to
-enable regular PBL console messages. For the i.MX8MM-EVK the unnecessary
-call to imx8m_uart_setup_ll() is dropped; we already configured the
-UART in imx8m_uart_setup(), no need to do that again.
-
-Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- arch/arm/boards/nxp-imx8mm-evk/lowlevel.c | 10 +++++-----
- arch/arm/boards/nxp-imx8mp-evk/lowlevel.c | 9 ++++++---
- arch/arm/boards/nxp-imx8mq-evk/lowlevel.c | 8 +++++---
- arch/arm/boards/phytec-som-imx8mq/lowlevel.c | 9 ++++++---
- arch/arm/boards/zii-imx8mq-dev/lowlevel.c | 10 ++++++----
- 5 files changed, 28 insertions(+), 18 deletions(-)
-
-diff --git a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-index 96b78d2c6695..2297dc01e77f 100644
---- a/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-+++ b/arch/arm/boards/nxp-imx8mm-evk/lowlevel.c
-@@ -28,16 +28,16 @@ extern char __dtb_imx8mm_evk_start[];
-
- static void setup_uart(void)
- {
-+ void __iomem *uart = IOMEM(MX8M_UART2_BASE_ADDR);
-+
- imx8m_early_setup_uart_clock();
-
- imx8mm_setup_pad(IMX8MM_PAD_UART2_TXD_UART2_TX | UART_PAD_CTRL);
-+ imx8m_uart_setup(uart);
-
-- imx8m_uart_setup((void *)MX8M_UART2_BASE_ADDR);
-+ pbl_set_putc(imx_uart_putc, uart);
-
-- if (IS_ENABLED(CONFIG_DEBUG_LL)) {
-- imx8m_uart_setup_ll();
-- putc_ll('>');
-- }
-+ putc_ll('>');
- }
-
- static void pmic_reg_write(void *i2c, int reg, uint8_t val)
-diff --git a/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
-index 5df1ed078001..e4f994a1d1b8 100644
---- a/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
-+++ b/arch/arm/boards/nxp-imx8mp-evk/lowlevel.c
-@@ -34,11 +34,15 @@ extern char __dtb_imx8mp_evk_start[];
-
- static void setup_uart(void)
- {
-+ void __iomem *uart = IOMEM(MX8M_UART2_BASE_ADDR);
-+
- imx8m_early_setup_uart_clock();
-
- imx8mp_setup_pad(MX8MP_PAD_UART2_TXD__UART2_DCE_TX | UART_PAD_CTRL);
- imx8mp_setup_pad(MX8MP_PAD_UART2_RXD__UART2_DCE_RX | UART_PAD_CTRL);
-- imx8m_uart_setup_ll();
-+ imx8m_uart_setup(uart);
-+
-+ pbl_set_putc(imx_uart_putc, uart);
-
- putc_ll('>');
- }
-@@ -163,8 +167,7 @@ static void start_atf(void)
- */
- static __noreturn noinline void nxp_imx8mp_evk_start(void)
- {
-- if (IS_ENABLED(CONFIG_DEBUG_LL))
-- setup_uart();
-+ setup_uart();
-
- start_atf();
-
-diff --git a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c
-index 39358afad196..564621abef57 100644
---- a/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c
-+++ b/arch/arm/boards/nxp-imx8mq-evk/lowlevel.c
-@@ -26,11 +26,14 @@ extern char __dtb_imx8mq_evk_start[];
-
- static void setup_uart(void)
- {
-+ void __iomem *uart = IOMEM(MX8M_UART1_BASE_ADDR);
-+
- imx8m_early_setup_uart_clock();
-
- imx8mq_setup_pad(IMX8MQ_PAD_UART1_TXD__UART1_TX | UART_PAD_CTRL);
-+ imx8m_uart_setup(uart);
-
-- imx8m_uart_setup_ll();
-+ pbl_set_putc(imx_uart_putc, uart);
-
- putc_ll('>');
- }
-@@ -53,8 +56,7 @@ static void setup_uart(void)
- */
- static __noreturn noinline void nxp_imx8mq_evk_start(void)
- {
-- if (IS_ENABLED(CONFIG_DEBUG_LL))
-- setup_uart();
-+ setup_uart();
-
- /*
- * If we are in EL3 we are running for the first time and need to
-diff --git a/arch/arm/boards/phytec-som-imx8mq/lowlevel.c b/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
-index f5b9b6c00882..05226866f828 100644
---- a/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
-+++ b/arch/arm/boards/phytec-som-imx8mq/lowlevel.c
-@@ -29,11 +29,15 @@ extern char __dtb_imx8mq_phytec_phycore_som_start[];
-
- static void setup_uart(void)
- {
-+ void __iomem *uart = IOMEM(MX8M_UART1_BASE_ADDR);
-+
- imx8m_early_setup_uart_clock();
-
- imx8mq_setup_pad(IMX8MQ_PAD_UART1_TXD__UART1_TX | UART_PAD_CTRL);
-
-- imx8m_uart_setup_ll();
-+ imx8m_uart_setup(uart);
-+
-+ pbl_set_putc(imx_uart_putc, uart);
-
- putc_ll('>');
- }
-@@ -56,8 +60,7 @@ static void phytec_imx8mq_som_sram_setup(void)
-
- static __noreturn noinline void phytec_phycore_imx8mq_start(void)
- {
-- if (IS_ENABLED(CONFIG_DEBUG_LL))
-- setup_uart();
-+ setup_uart();
-
- if (get_pc() < MX8MQ_DDR_CSD1_BASE_ADDR) {
- /*
-diff --git a/arch/arm/boards/zii-imx8mq-dev/lowlevel.c b/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
-index 640083380906..311e61fb1da4 100644
---- a/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
-+++ b/arch/arm/boards/zii-imx8mq-dev/lowlevel.c
-@@ -28,11 +28,14 @@
-
- static void setup_uart(void)
- {
-+ void __iomem *uart = IOMEM(MX8M_UART1_BASE_ADDR);
-+
- imx8m_early_setup_uart_clock();
-
- imx8mq_setup_pad(IMX8MQ_PAD_UART1_TXD__UART1_TX | UART_PAD_CTRL);
-+ imx8m_uart_setup(uart);
-
-- imx8m_uart_setup_ll();
-+ pbl_set_putc(imx_uart_putc, uart);
-
- putc_ll('>');
- }
-@@ -118,6 +121,8 @@ static __noreturn noinline void zii_imx8mq_dev_start(void)
- unsigned int system_type;
- void *fdt;
-
-+ setup_uart();
-+
- if (get_pc() < MX8MQ_DDR_CSD1_BASE_ADDR) {
- /*
- * We assume that we were just loaded by MaskROM into
-@@ -194,9 +199,6 @@ ENTRY_FUNCTION(start_zii_imx8mq_dev, r0, r1, r2)
- imx8mq_cpu_lowlevel_init();
- relocate_to_current_adr();
- setup_c();
--
-- if (IS_ENABLED(CONFIG_DEBUG_LL))
-- setup_uart();
-
- zii_imx8mq_dev_start();
- }
diff --git a/configs/platform-v8a/patches/barebox-2020.08.1/0004-clk-imx8mm-fix-CPU-clock.patch b/configs/platform-v8a/patches/barebox-2020.08.1/0004-clk-imx8mm-fix-CPU-clock.patch
deleted file mode 100644
index 9d51128f8fc2..000000000000
--- a/configs/platform-v8a/patches/barebox-2020.08.1/0004-clk-imx8mm-fix-CPU-clock.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From: Lucas Stach <l.stach@pengutronix.de>
-Date: Thu, 20 Aug 2020 21:45:47 +0200
-Subject: [PATCH] clk: imx8mm: fix CPU clock
-
-This is a port of the Linux kernel commit d3b70cd87e77 (clk: imx: imx8mm:
-fix a53 cpu cloc). This allows the reparenting as specified in the new DTs
-to succeed.
-
-Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
-Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
----
- drivers/clk/imx/clk-imx8mm.c | 13 +++++++++----
- 1 file changed, 9 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/clk/imx/clk-imx8mm.c b/drivers/clk/imx/clk-imx8mm.c
-index a31741af884f..17cb0177f758 100644
---- a/drivers/clk/imx/clk-imx8mm.c
-+++ b/drivers/clk/imx/clk-imx8mm.c
-@@ -26,6 +26,8 @@ static const char *sys_pll3_bypass_sels[] = {"sys_pll3", "sys_pll3_ref_sel", };
- static const char *imx8mm_a53_sels[] = {"osc_24m", "arm_pll_out", "sys_pll2_500m", "sys_pll2_1000m",
- "sys_pll1_800m", "sys_pll1_400m", "audio_pll1_out", "sys_pll3_out", };
-
-+static const char *imx8mm_a53_core_sels[] = {"arm_a53_div", "arm_pll_out", };
-+
- static const char *imx8mm_m4_sels[] = {"osc_24m", "sys_pll2_200m", "sys_pll2_250m", "sys_pll1_266m",
- "sys_pll1_800m", "audio_pll1_out", "video_pll1_out", "sys_pll3_out", };
-
-@@ -396,6 +398,9 @@ static int imx8mm_clocks_init(struct device_node *ccm_np)
- clks[IMX8MM_CLK_GPU3D_DIV] = imx_clk_divider2("gpu3d_div", "gpu3d_cg", ccm + 0x8180, 0, 3);
- clks[IMX8MM_CLK_GPU2D_DIV] = imx_clk_divider2("gpu2d_div", "gpu2d_cg", ccm + 0x8200, 0, 3);
-
-+ /* CORE SEL */
-+ clks[IMX8MM_CLK_A53_CORE] = imx_clk_mux2_flags("arm_a53_core", ccm + 0x9880, 24, 1, imx8mm_a53_core_sels, ARRAY_SIZE(imx8mm_a53_core_sels), CLK_IS_CRITICAL);
-+
- /* BUS */
- clks[IMX8MM_CLK_MAIN_AXI] = imx8m_clk_composite_critical("main_axi", imx8mm_main_axi_sels, ccm + 0x8800);
- clks[IMX8MM_CLK_ENET_AXI] = imx8m_clk_composite("enet_axi", imx8mm_enet_axi_sels, ccm + 0x8880);
-@@ -556,11 +561,11 @@ static int imx8mm_clocks_init(struct device_node *ccm_np)
- clks[IMX8MM_CLK_DRAM_ALT_ROOT] = imx_clk_fixed_factor("dram_alt_root", "dram_alt", 1, 4);
- clks[IMX8MM_CLK_DRAM_CORE] = imx_clk_mux2_flags("dram_core_clk", ccm + 0x9800, 24, 1, imx8mm_dram_core_sels, ARRAY_SIZE(imx8mm_dram_core_sels), CLK_IS_CRITICAL);
-
-- clks[IMX8MM_CLK_ARM] = imx_clk_cpu("arm", "arm_a53_div",
-- clks[IMX8MM_CLK_A53_DIV],
-- clks[IMX8MM_CLK_A53_SRC],
-+ clks[IMX8MM_CLK_ARM] = imx_clk_cpu("arm", "arm_a53_core",
-+ clks[IMX8MM_CLK_A53_CORE],
-+ clks[IMX8MM_CLK_A53_CORE],
- clks[IMX8MM_ARM_PLL_OUT],
-- clks[IMX8MM_SYS_PLL1_800M]);
-+ clks[IMX8MM_CLK_A53_DIV]);
-
- imx_check_clocks(clks, ARRAY_SIZE(clks));
-
diff --git a/configs/platform-v8a/patches/barebox-2020.08.1/0101-Release-v2020.08.1-imx8m-20200821-1.patch b/configs/platform-v8a/patches/barebox-2020.08.1/0101-Release-v2020.08.1-imx8m-20200821-1.patch
deleted file mode 100644
index e33e8e805622..000000000000
--- a/configs/platform-v8a/patches/barebox-2020.08.1/0101-Release-v2020.08.1-imx8m-20200821-1.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From: Sascha Hauer <s.hauer@pengutronix.de>
-Date: Fri, 21 Aug 2020 07:43:53 +0200
-Subject: [PATCH] Release v2020.08.1-imx8m/20200821-1
-
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index d27b78201bda..d6aab4c98507 100644
---- a/Makefile
-+++ b/Makefile
-@@ -2,7 +2,7 @@
- VERSION = 2020
- PATCHLEVEL = 08
- SUBLEVEL = 1
--EXTRAVERSION =
-+EXTRAVERSION =-20200821-1
- NAME = None
-
- # *DOCUMENTATION*
diff --git a/configs/platform-v8a/patches/barebox-2020.08.1/series b/configs/platform-v8a/patches/barebox-2020.08.1/series
deleted file mode 100644
index 7795aa15dbac..000000000000
--- a/configs/platform-v8a/patches/barebox-2020.08.1/series
+++ /dev/null
@@ -1,14 +0,0 @@
-# umpf-base: v2020.08.1
-# umpf-name: v2020.08.1-imx8m
-# umpf-version: v2020.08.1-imx8m/20200821-1
-# umpf-topic: v2020.08.0/topic/imx8m
-# umpf-hashinfo: f200913643b0a12af01d045261003de8bc6fc91c
-# umpf-topic-range: 4dcefc03c4db34233cfa49cf48141a75d574070e..19bddd83dd34d8c5b691db298847f351f5bc652d
-0001-ARM-nxp-imx8mm-evk-always-set-up-UART.patch
-0002-ARM-imx8m-Make-uart-setup-function-name-more-generic.patch
-0003-ARM-i.MX8M-boards-always-set-up-UART.patch
-0004-clk-imx8mm-fix-CPU-clock.patch
-# umpf-release: v2020.08.1-imx8m/20200821-1
-# umpf-topic-range: 19bddd83dd34d8c5b691db298847f351f5bc652d..08a8f1cc7a2d6ae1f100d721eeb697ca53889789
-0101-Release-v2020.08.1-imx8m-20200821-1.patch
-# umpf-end
diff --git a/configs/platform-v8a/rules/barebox-imx8m.make b/configs/platform-v8a/rules/barebox-imx8m.make
index 6db8abf4afdb..f9e7d2fd0813 100644
--- a/configs/platform-v8a/rules/barebox-imx8m.make
+++ b/configs/platform-v8a/rules/barebox-imx8m.make
@@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_BAREBOX_IMX8M) += barebox-imx8m
#
# Paths and names
#
-BAREBOX_IMX8M_VERSION := 2020.08.1
-BAREBOX_IMX8M_MD5 := d57031878390cb267f6641aedffcda9f
+BAREBOX_IMX8M_VERSION := 2021.02.0
+BAREBOX_IMX8M_MD5 := 07045e34faa1135d9cd18503186b2d7f
BAREBOX_IMX8M := barebox-imx8m-$(BAREBOX_IMX8M_VERSION)
BAREBOX_IMX8M_SUFFIX := tar.bz2
BAREBOX_IMX8M_URL := $(call barebox-url, BAREBOX_IMX8M)
--
2.29.2
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [DistroKit] [PATCH] v8a/imx8m: barebox: Version bump: 2020.08.1 -> 2021.02.0
2021-03-16 10:19 [DistroKit] [PATCH] v8a/imx8m: barebox: Version bump: 2020.08.1 -> 2021.02.0 Uwe Kleine-König
@ 2021-03-16 11:01 ` Robert Schwebel
0 siblings, 0 replies; 2+ messages in thread
From: Robert Schwebel @ 2021-03-16 11:01 UTC (permalink / raw)
To: Uwe Kleine-König; +Cc: distrokit
On Tue, Mar 16, 2021 at 11:19:46AM +0100, Uwe Kleine-König wrote:
> This gets rid of all patches, they are included in 2020.09.0.
> ---
> configs/platform-v8a/barebox-imx8m.config | 19 +-
> ...RM-nxp-imx8mm-evk-always-set-up-UART.patch | 46 -----
> ...art-setup-function-name-more-generic.patch | 54 -----
> ...ARM-i.MX8M-boards-always-set-up-UART.patch | 185 ------------------
> .../0004-clk-imx8mm-fix-CPU-clock.patch | 53 -----
> ...-Release-v2020.08.1-imx8m-20200821-1.patch | 21 --
> .../patches/barebox-2020.08.1/series | 14 --
> configs/platform-v8a/rules/barebox-imx8m.make | 4 +-
> 8 files changed, 19 insertions(+), 377 deletions(-)
> delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0001-ARM-nxp-imx8mm-evk-always-set-up-UART.patch
> delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0002-ARM-imx8m-Make-uart-setup-function-name-more-generic.patch
> delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0003-ARM-i.MX8M-boards-always-set-up-UART.patch
> delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0004-clk-imx8mm-fix-CPU-clock.patch
> delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/0101-Release-v2020.08.1-imx8m-20200821-1.patch
> delete mode 100644 configs/platform-v8a/patches/barebox-2020.08.1/series
Applied to next.
rsc
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-03-16 11:01 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-03-16 10:19 [DistroKit] [PATCH] v8a/imx8m: barebox: Version bump: 2020.08.1 -> 2021.02.0 Uwe Kleine-König
2021-03-16 11:01 ` Robert Schwebel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox