From: Jan Luebbe <jlu@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Jan Luebbe <jlu@pengutronix.de>
Subject: [DistroKit] [PATCH 1/2] v7a: barebox: enable CONFIG_BOOTM_INITRD consistenly
Date: Thu, 25 Aug 2022 12:45:08 +0200 [thread overview]
Message-ID: <20220825104509.735383-1-jlu@pengutronix.de> (raw)
It was enabled for mx6&rpi&stm32mp&vexpress, but not for am335x&at91.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
---
configs/platform-v7a/barebox-am335x.config | 2 +-
configs/platform-v7a/barebox-am335x.config.diff | 2 +-
configs/platform-v7a/barebox-at91.config | 2 +-
configs/platform-v7a/barebox-at91.config.diff | 2 +-
configs/platform-v7a/barebox-mx6.config.diff | 3 +--
configs/platform-v7a/barebox-rpi2.config.diff | 3 +--
configs/platform-v7a/barebox-stm32mp.config.diff | 3 +--
configs/platform-v7a/barebox-vexpress.config.diff | 3 +--
configs/platform-v7a/barebox.config | 2 +-
9 files changed, 9 insertions(+), 13 deletions(-)
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index d5158225a3b1..ca11a0dc40a5 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -171,7 +171,7 @@ CONFIG_ERRNO_MESSAGES=y
CONFIG_BOOTM=y
CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
-# CONFIG_BOOTM_INITRD is not set
+CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_AIMAGE is not set
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index b104b9de3213..a1b25b6bacb2 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-bccbfd59ca1a1f55312818ed9031a323
+9c16ea1d7fee27ebbd0ce983140a223d
# CONFIG_AM33XX_NET_BOOT is not set
CONFIG_ARCH_AM33XX=y
# CONFIG_ARCH_BCM283X is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index dde0ec8b8e39..e253ed5d97e4 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -176,7 +176,7 @@ CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
-# CONFIG_BOOTM_INITRD is not set
+CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_AIMAGE is not set
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index e7e3a813f21c..f2d44c5c2719 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-bccbfd59ca1a1f55312818ed9031a323
+9c16ea1d7fee27ebbd0ce983140a223d
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_TEXT_BASE=0x23f00000
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 93a31eeb7940..1d578c4f97bb 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-bccbfd59ca1a1f55312818ed9031a323
+9c16ea1d7fee27ebbd0ce983140a223d
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_FEC_IMX=y
CONFIG_ARCH_HAS_IMX_GPT=y
@@ -17,7 +17,6 @@ CONFIG_AT803X_PHY=y
CONFIG_BAREBOX_UPDATE_IMX_NAND_FCB=y
CONFIG_BCH=y
# CONFIG_BMP is not set
-CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_CACHE_L2X0 is not set
# CONFIG_CLOCKSOURCE_BCM283X is undefined
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 01d75e5ceda9..e77233fab822 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,6 +1,5 @@
-bccbfd59ca1a1f55312818ed9031a323
+9c16ea1d7fee27ebbd0ce983140a223d
CONFIG_ARM_ASM_UNIFIED=y
-CONFIG_BOOTM_INITRD=y
# CONFIG_CMD_I2C is undefined
CONFIG_CMD_MIITOOL=y
# CONFIG_CMD_NVMEM is not set
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index 39d7c5333749..430ab3c7782a 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-bccbfd59ca1a1f55312818ed9031a323
+9c16ea1d7fee27ebbd0ce983140a223d
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_NR_GPIO=416
@@ -16,7 +16,6 @@ CONFIG_ARM_USE_COMPRESSED_DTB=y
CONFIG_AT803X_PHY=y
# CONFIG_BOARD_ARM_GENERIC_DT is not set
# CONFIG_BOARD_GENERIC_DT is undefined
-CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BZLIB is not set
# CONFIG_CLKSRC_STM32 is not set
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index 01d5633ac198..8a4584e935e3 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,11 +1,10 @@
-bccbfd59ca1a1f55312818ed9031a323
+9c16ea1d7fee27ebbd0ce983140a223d
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
-CONFIG_BOOTM_INITRD=y
# CONFIG_CFI_BUFFER_WRITE is not set
# CONFIG_CLOCKSOURCE_BCM283X is undefined
# CONFIG_CMD_GPIO is undefined
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index da56af9ace67..d7129aca964f 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -161,7 +161,7 @@ CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
-# CONFIG_BOOTM_INITRD is not set
+CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_OFTREE_UIMAGE is not set
# CONFIG_BOOTM_AIMAGE is not set
--
2.30.2
next reply other threads:[~2022-08-25 10:45 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-25 10:45 Jan Luebbe [this message]
2022-08-25 10:45 ` [DistroKit] [PATCH 2/2] v7a: barebox: enable CONFIG_CMD_MIITOOL consistenly Jan Luebbe
2022-09-05 13:57 ` [DistroKit] [PATCH 1/2] v7a: barebox: enable CONFIG_BOOTM_INITRD consistenly Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220825104509.735383-1-jlu@pengutronix.de \
--to=jlu@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox