From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH 06/10] v7a: kernel: configure for 32-bit Raspberry Pi 4 support
Date: Fri, 30 Sep 2022 18:21:55 +0200 [thread overview]
Message-ID: <20220930162159.814389-7-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20220930162159.814389-1-a.fatoum@pengutronix.de>
We already support the Raspberry Pi 3 with our v7a kernel configuration,
flip a few more options to get the kernel running on a Raspberry Pi 4
in A32 mode as well.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
configs/platform-v7a/kernelconfig | 21 +++++++++++++--------
1 file changed, 13 insertions(+), 8 deletions(-)
diff --git a/configs/platform-v7a/kernelconfig b/configs/platform-v7a/kernelconfig
index 43752f0dc9ab..f1021bc5e6ad 100644
--- a/configs/platform-v7a/kernelconfig
+++ b/configs/platform-v7a/kernelconfig
@@ -1476,7 +1476,10 @@ CONFIG_ETHERNET=y
# CONFIG_NET_VENDOR_ARC is not set
CONFIG_NET_VENDOR_ASIX=y
# CONFIG_SPI_AX88796C is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_NET_VENDOR_BROADCOM=y
+# CONFIG_B44 is not set
+CONFIG_BCMGENET=y
+# CONFIG_SYSTEMPORT is not set
CONFIG_NET_VENDOR_CADENCE=y
CONFIG_MACB=y
CONFIG_MACB_USE_HWSTAMP=y
@@ -1559,11 +1562,12 @@ CONFIG_FIXED_PHY=y
# CONFIG_ADIN_PHY is not set
# CONFIG_AQUANTIA_PHY is not set
CONFIG_AX88796B_PHY=y
-# CONFIG_BROADCOM_PHY is not set
+CONFIG_BROADCOM_PHY=y
# CONFIG_BCM54140_PHY is not set
-# CONFIG_BCM7XXX_PHY is not set
+CONFIG_BCM7XXX_PHY=y
# CONFIG_BCM84881_PHY is not set
# CONFIG_BCM87XX_PHY is not set
+CONFIG_BCM_NET_PHYLIB=y
# CONFIG_CICADA_PHY is not set
# CONFIG_CORTINA_PHY is not set
# CONFIG_DAVICOM_PHY is not set
@@ -1605,7 +1609,7 @@ CONFIG_FWNODE_MDIO=y
CONFIG_OF_MDIO=y
CONFIG_MDIO_DEVRES=y
# CONFIG_MDIO_BITBANG is not set
-# CONFIG_MDIO_BCM_UNIMAC is not set
+CONFIG_MDIO_BCM_UNIMAC=y
# CONFIG_MDIO_HISI_FEMAC is not set
# CONFIG_MDIO_MVUSB is not set
# CONFIG_MDIO_MSCC_MIIM is not set
@@ -1808,7 +1812,7 @@ CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_ATMEL=y
# CONFIG_HW_RANDOM_BA431 is not set
CONFIG_HW_RANDOM_BCM2835=y
-# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
+CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_STM32=y
@@ -2018,7 +2022,7 @@ CONFIG_GPIO_GENERIC=y
#
# CONFIG_GPIO_74XX_MMIO is not set
# CONFIG_GPIO_ALTERA is not set
-# CONFIG_GPIO_RASPBERRYPI_EXP is not set
+CONFIG_GPIO_RASPBERRYPI_EXP=y
# CONFIG_GPIO_CADENCE is not set
# CONFIG_GPIO_DWAPB is not set
# CONFIG_GPIO_FTGPIO010 is not set
@@ -2173,7 +2177,7 @@ CONFIG_IMX_THERMAL=y
#
# Broadcom thermal drivers
#
-# CONFIG_BCM2711_THERMAL is not set
+CONFIG_BCM2711_THERMAL=y
CONFIG_BCM2835_THERMAL=y
# end of Broadcom thermal drivers
@@ -3365,7 +3369,7 @@ CONFIG_NVMEM_IMX_IIM=y
CONFIG_NVMEM_IMX_OCOTP=y
CONFIG_NVMEM_STM32_ROMEM=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
-# CONFIG_NVMEM_RMEM is not set
+CONFIG_NVMEM_RMEM=y
#
# HW tracing support
@@ -3856,6 +3860,7 @@ CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
# CONFIG_IRQ_POLL is not set
CONFIG_MPILIB=y
+CONFIG_DIMLIB=y
CONFIG_LIBFDT=y
CONFIG_OID_REGISTRY=y
CONFIG_HAVE_GENERIC_VDSO=y
--
2.30.2
next prev parent reply other threads:[~2022-09-30 16:22 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-30 16:21 [DistroKit] [PATCH 00/10] v7a: add Raspberry Pi 4 32-bit support Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 01/10] v7a: barebox: version bump v2022.06.0 → v2022.09.0 Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 02/10] v7a: barebox: switch to new broken-cd device parameter Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 03/10] v7a: rpi2: move rpi-firmware directory to top-level workspace Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 04/10] rpi-firmware: Update firmware to v1.20220331 for Rpi4 support Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 05/10] barebox: deploy new barebox-raspberry-pi.img Ahmad Fatoum
2022-09-30 16:21 ` Ahmad Fatoum [this message]
2022-09-30 16:21 ` [DistroKit] [PATCH 07/10] v7a: dts: build Raspberry Pi 4 device trees Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 08/10] v7a: rpi4: add boot loader spec support Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 09/10] v7a: rpi4: place DT into /boot for VideoCore consumption Ahmad Fatoum
2022-09-30 16:21 ` [DistroKit] [PATCH 10/10] v7a: barebox: enable of_diff command Ahmad Fatoum
2022-09-30 16:55 ` [DistroKit] [PATCH 00/10] v7a: add Raspberry Pi 4 32-bit support Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220930162159.814389-7-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox