From: Roland Hieber <rhi@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Roland Hieber <rhi@pengutronix.de>
Subject: [DistroKit] [PATCH 01/14] platforms: revert to default systemd loglevel
Date: Fri, 23 Jun 2023 14:47:42 +0200 [thread overview]
Message-ID: <20230623124755.2292833-2-rhi@pengutronix.de> (raw)
In-Reply-To: <20230623124755.2292833-1-rhi@pengutronix.de>
By decreasing the systemd loglevel to "warning", the journal no longer
contains useful lines like which units were started and stopped and
when, which is quite sparse information for debugging. Remove the
systemd.log_level from the kernel command line so systemd defaults to
loglevel "info" (same level as loglevel=5 for the kernel).
Keep the systemd.show_status setting on "auto" so that systemd only
produces actual console output when the boot takes a significant amount
of time, or produces error messages; so this change only changes the
verbosity of the journal, not the console, on normal boots.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
configs/platform-mips/run | 2 +-
.../barebox-am335x-defaultenv/nv/linux.bootargs.loglevel | 2 +-
.../barebox-mx6-defaultenv/nv/linux.bootargs.loglevel | 2 +-
.../barebox-rpi2-defaultenv/nv/linux.bootargs.loglevel | 2 +-
.../barebox-stm32mp-defaultenv/nv/linux.bootargs.loglevel | 2 +-
.../barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel | 2 +-
configs/platform-v7a/run | 2 +-
configs/platform-v7a/run-nfs | 2 +-
.../barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel | 2 +-
configs/platform-v7a_noneon/run | 2 +-
configs/platform-v7a_noneon/run-nfs | 2 +-
.../barebox-common-defaultenv/nv/linux.bootargs.loglevel | 2 +-
.../barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel | 2 +-
configs/platform-x86_64/run | 2 +-
14 files changed, 14 insertions(+), 14 deletions(-)
diff --git a/configs/platform-mips/run b/configs/platform-mips/run
index edfce51a96b5..cf8a535167e3 100755
--- a/configs/platform-mips/run
+++ b/configs/platform-mips/run
@@ -65,7 +65,7 @@ if [ -z "${QEMU_NET}" ]; then
QEMU_NET=(-netdev user,id=net1,hostfwd=tcp:127.0.0.1:${TELNET_EXTERNAL_PORT}-:${TELNET_INTERNAL_PORT},hostfwd=tcp:127.0.0.1:${SSH_EXTERNAL_PORT}-:${SSH_INTERNAL_PORT} )
fi
-BASE_CMDLINE="console=ttyS0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto"
+BASE_CMDLINE="console=ttyS0,115200 loglevel=5 systemd.show_status=auto"
# Machine to emulate
QEMU_ARGS=( -M malta -m 256 -serial stdio -monitor null -device qemu-xhci,id=xhci)
diff --git a/configs/platform-v7a/barebox-am335x-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-am335x-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v7a/barebox-am335x-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v7a/barebox-am335x-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v7a/barebox-mx6-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-mx6-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v7a/barebox-mx6-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v7a/barebox-mx6-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v7a/barebox-rpi2-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-rpi2-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v7a/barebox-rpi2-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v7a/barebox-rpi2-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v7a/barebox-stm32mp-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-stm32mp-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v7a/barebox-stm32mp-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v7a/barebox-stm32mp-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v7a/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v7a/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v7a/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v7a/run b/configs/platform-v7a/run
index 3f62b237ac12..004706ddaf59 100755
--- a/configs/platform-v7a/run
+++ b/configs/platform-v7a/run
@@ -62,7 +62,7 @@ if [ -z "${QEMU_NET}" ]; then
echo "Forwarding SSH port 127.0.0.1:${SSH_EXTERNAL_PORT} -> qemu:${SSH_INTERNAL_PORT}"
fi
-BASE_CMDLINE="console=ttyAMA0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto"
+BASE_CMDLINE="console=ttyAMA0,115200 loglevel=5 systemd.show_status=auto"
if [ -d "${PTXDIST_PLATFORMDIR}/root/.virtfs_metadata" ]; then
security_model="mapped-file"
diff --git a/configs/platform-v7a/run-nfs b/configs/platform-v7a/run-nfs
index d1675fb47bfd..c78e36ca1ea0 100755
--- a/configs/platform-v7a/run-nfs
+++ b/configs/platform-v7a/run-nfs
@@ -16,5 +16,5 @@ ${QEMU_EXEC} ${QEMU_NOGRAPHIC} \
-kernel ${PTXDIST_PLATFORMDIR}/images/linuximage \
-dtb ${PTXDIST_PLATFORMDIR}/images/vexpress-v2p-ca9.dtb \
-smp 1 \
- -append "console=ttyAMA0 root=/dev/nfs nfsroot=10.0.2.2:/root,v3,tcp,port=2049,mountport=2049 rw mem=1024M rootwait loglevel=5 systemd.log_level=warning systemd.show_status=auto ip=dhcp"
+ -append "console=ttyAMA0 root=/dev/nfs nfsroot=10.0.2.2:/root,v3,tcp,port=2049,mountport=2049 rw mem=1024M rootwait loglevel=5 systemd.show_status=auto ip=dhcp"
diff --git a/configs/platform-v7a_noneon/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v7a_noneon/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v7a_noneon/barebox-vexpress-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v7a_noneon/run b/configs/platform-v7a_noneon/run
index 8af190f11eb4..0bb06bc60868 100755
--- a/configs/platform-v7a_noneon/run
+++ b/configs/platform-v7a_noneon/run
@@ -62,7 +62,7 @@ if [ -z "${QEMU_NET}" ]; then
echo "Forwarding SSH port 127.0.0.1:${SSH_EXTERNAL_PORT} -> qemu:${SSH_INTERNAL_PORT}"
fi
-BASE_CMDLINE="console=ttyAMA0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto"
+BASE_CMDLINE="console=ttyAMA0,115200 loglevel=5 systemd.show_status=auto"
if [ -d "${PTXDIST_PLATFORMDIR}/root/.virtfs_metadata" ]; then
security_model="mapped-file"
diff --git a/configs/platform-v7a_noneon/run-nfs b/configs/platform-v7a_noneon/run-nfs
index d1675fb47bfd..c78e36ca1ea0 100755
--- a/configs/platform-v7a_noneon/run-nfs
+++ b/configs/platform-v7a_noneon/run-nfs
@@ -16,5 +16,5 @@ ${QEMU_EXEC} ${QEMU_NOGRAPHIC} \
-kernel ${PTXDIST_PLATFORMDIR}/images/linuximage \
-dtb ${PTXDIST_PLATFORMDIR}/images/vexpress-v2p-ca9.dtb \
-smp 1 \
- -append "console=ttyAMA0 root=/dev/nfs nfsroot=10.0.2.2:/root,v3,tcp,port=2049,mountport=2049 rw mem=1024M rootwait loglevel=5 systemd.log_level=warning systemd.show_status=auto ip=dhcp"
+ -append "console=ttyAMA0 root=/dev/nfs nfsroot=10.0.2.2:/root,v3,tcp,port=2049,mountport=2049 rw mem=1024M rootwait loglevel=5 systemd.show_status=auto ip=dhcp"
diff --git a/configs/platform-v8a/barebox-common-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v8a/barebox-common-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v8a/barebox-common-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v8a/barebox-common-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel b/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
index 705752ca416d..d45c34464422 100644
--- a/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
+++ b/configs/platform-v8a/barebox-rock3a-defaultenv/nv/linux.bootargs.loglevel
@@ -1 +1 @@
-loglevel=5 systemd.log_level=warning systemd.show_status=auto
+loglevel=5 systemd.show_status=auto
diff --git a/configs/platform-x86_64/run b/configs/platform-x86_64/run
index 963222928964..ddc510070418 100755
--- a/configs/platform-x86_64/run
+++ b/configs/platform-x86_64/run
@@ -65,7 +65,7 @@ if [ -z "${QEMU_NET}" ]; then
QEMU_NET=(-netdev user,id=net1,hostfwd=tcp:127.0.0.1:${TELNET_EXTERNAL_PORT}-:${TELNET_INTERNAL_PORT},hostfwd=tcp:127.0.0.1:${SSH_EXTERNAL_PORT}-:${SSH_INTERNAL_PORT} )
fi
-BASE_CMDLINE="console=ttyS0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto"
+BASE_CMDLINE="console=ttyS0,115200 loglevel=5 systemd.show_status=auto"
if [ -d "${PTXDIST_PLATFORMDIR}/root/.virtfs_metadata" ]; then
security_model="mapped-file"
--
2.39.2
next prev parent reply other threads:[~2023-06-23 12:48 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-23 12:47 [DistroKit] [PATCH 00/14] v7a: add redundant update support via RAUC Roland Hieber
2023-06-23 12:47 ` Roland Hieber [this message]
2023-08-14 15:39 ` [DistroKit] [PATCH 01/14] platforms: revert to default systemd loglevel Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 02/14] ptxconfig: enable more tools for debugging Roland Hieber
2023-08-14 16:03 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 03/14] rauc-udev: add a compatibility layer for mapping partitions Roland Hieber
2023-08-14 16:36 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 04/14] v7a: barebox: include generic bootstate node in device tree Roland Hieber
2023-08-14 16:36 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 05/14] v7a: add RAUC support for qemu-vexpress Roland Hieber
2023-08-14 16:36 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 06/14] v7a: add RAUC support for beaglebone black Roland Hieber
2023-08-14 16:36 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 07/14] v7a: add RAUC support for rpi3 Roland Hieber
2023-08-14 16:37 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 08/14] v7a: add RAUC support for riotboard Roland Hieber
2023-08-14 16:37 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 09/14] v7a: kernel: enable features necessary for RAUC Roland Hieber
2023-08-14 16:37 ` Robert Schwebel
2023-08-15 8:47 ` Robert Schwebel
2023-08-25 11:06 ` Roland Hieber
2023-06-23 12:47 ` [DistroKit] [PATCH 10/14] rauc: add initial support Roland Hieber
2023-08-14 16:37 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 11/14] v7a: enable RAUC bundle creation Roland Hieber
2023-08-14 16:37 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 12/14] image-rauc: fork config from PTXdist 2023.04.0 Roland Hieber
2023-08-14 16:38 ` Robert Schwebel
2023-06-23 12:47 ` [DistroKit] [PATCH 13/14] image-rauc: use ext4 rootfs instead of tar.gz Roland Hieber
2023-08-14 16:38 ` Robert Schwebel
2023-08-15 8:14 ` Robert Schwebel
2023-08-15 8:18 ` Robert Schwebel
2023-08-25 11:04 ` Roland Hieber
2023-06-23 12:47 ` [DistroKit] [PATCH 14/14] v7a: run: start with barebox by default Roland Hieber
2023-08-14 16:38 ` Robert Schwebel
2023-06-23 12:49 ` [DistroKit] [PATCH v4 00/14] v7a: add redundant update support via RAUC Roland Hieber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230623124755.2292833-2-rhi@pengutronix.de \
--to=rhi@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox