From: Oleksij Rempel <o.rempel@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [DistroKit] [PATCH v1 1/5] v7a_noneon: barebox: version bump v2023.01.0 → v2023.07.1
Date: Thu, 6 Jul 2023 13:44:30 +0200 [thread overview]
Message-ID: <20230706114434.1751248-1-o.rempel@pengutronix.de> (raw)
This version updated includes some patches for the Microchip KSZ9477
and support for the Microchip SAMA5D3 Ethernet Development System (EDS)
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
.../platform-v7a_noneon/barebox-at91.config | 66 ++++--
.../barebox-at91.config.diff | 29 ++-
.../barebox-vexpress.config | 69 ++++--
.../barebox-vexpress.config.diff | 9 +-
configs/platform-v7a_noneon/barebox.config | 74 ++++--
...nable-ddramc-for-sama5d3-and-sama5d4.patch | 32 +++
...port-for-SAMA5D3-Ethernet-Developmen.patch | 219 ++++++++++++++++++
...ip-ksz9477-evb-migrate-to-sama5d3_ba.patch | 23 ++
...0-customers-pengutronix-distrokit-sa.patch | 22 ++
.../patches/barebox-2023.07.1/series | 13 ++
configs/platform-v7a_noneon/platformconfig | 4 +-
11 files changed, 476 insertions(+), 84 deletions(-)
create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
index 9c18061..584bfae 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config
+++ b/configs/platform-v7a_noneon/barebox-at91.config
@@ -1,42 +1,35 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.05.0 Configuration
+# Barebox/arm 2023.07.1-20230706-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
-CONFIG_HAVE_MACH_ARM_HEAD=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
CONFIG_TEXT_BASE=0x0
#
# System Type
#
+# CONFIG_ARCH_MULTIARCH is not set
CONFIG_ARCH_AT91=y
-# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DIGIC is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_OMAP_SINGLE is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_S3C24xx is not set
-# CONFIG_ARCH_S5PCxx is not set
-# CONFIG_ARCH_S3C64xx is not set
-# CONFIG_ARCH_STM32MP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCH_ARM64_VIRT is not set
+# CONFIG_ARCH_BCM283X is not set
+# CONFIG_ARCH_STM32MP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
#
# Processor Type
@@ -53,10 +46,12 @@ CONFIG_HAVE_AT91_UTMI=y
CONFIG_HAVE_AT91_USB_CLK=y
CONFIG_COMMON_CLK_AT91=y
CONFIG_HAVE_AT91_SMD=y
+CONFIG_HAVE_AT91_DDRAMC=y
CONFIG_AT91_MCI_PBL=y
CONFIG_AT91SAM9_SMC=y
CONFIG_HAVE_AT91SAM9_RST=y
CONFIG_SOC_SAMA5=y
+CONFIG_SOC_SAMA5_MULTI=y
CONFIG_SOC_SAMA5D3=y
CONFIG_ARCH_TEXT_BASE=0x23f00000
@@ -68,19 +63,23 @@ CONFIG_AT91_MULTI_BOARDS=y
# CONFIG_MACH_AT91SAM9263EK is not set
# CONFIG_MACH_AT91SAM9X5EK is not set
CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
+# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set
# CONFIG_MACH_SAMA5D3_XPLAINED is not set
# CONFIG_MACH_SAMA5D27_SOM1 is not set
# CONFIG_MACH_SAMA5D27_GIANTBOARD is not set
+# CONFIG_MACH_SAMA5D4_WIFX is not set
#
# AT91 Board Options
#
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
# CONFIG_BOARD_ARM_GENERIC_DT is not set
CONFIG_AEABI=y
# CONFIG_ARM_BOARD_APPEND_ATAG is not set
# end of System Type
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
+
#
# ARM specific settings
#
@@ -97,11 +96,10 @@ CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_HAS_CACHE=y
CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
-CONFIG_USE_COMPRESSED_DTB=y
CONFIG_FILETYPE=y
CONFIG_BINFMT=y
CONFIG_UIMAGE=y
@@ -130,6 +128,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_USE_COMPRESSED_DTB=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_LZ4 is not set
@@ -138,7 +137,7 @@ CONFIG_IMAGE_COMPRESSION=y
# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
CONFIG_IMAGE_COMPRESSION_NONE=y
CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
@@ -200,7 +199,6 @@ CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
-# CONFIG_DEFAULT_COMPRESSION_LZO is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set
@@ -236,6 +234,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
@@ -244,6 +243,7 @@ CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
+# CONFIG_WERROR is not set
# end of Debugging
#
@@ -266,6 +266,7 @@ CONFIG_COMPILE_HASH=y
CONFIG_CMD_AT91CLK=y
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_DEVLOOKUP is not set
# CONFIG_CMD_DEVUNBIND is not set
CONFIG_CMD_DMESG=y
CONFIG_CMD_DRVINFO=y
@@ -337,6 +338,7 @@ CONFIG_CMD_DIRNAME=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_LN=y
CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
@@ -427,15 +429,18 @@ CONFIG_CMD_USBGADGET=y
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_BLOBGEN is not set
# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_OF_COMPATIBLE is not set
# CONFIG_CMD_OF_DIFF is not set
CONFIG_CMD_OF_DUMP=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP is not set
# CONFIG_CMD_OF_FIXUP_STATUS is not set
# CONFIG_CMD_OF_OVERLAY is not set
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
# CONFIG_CMD_SEED is not set
@@ -481,8 +486,9 @@ CONFIG_PHYLIB=y
#
# Network drivers
#
-# CONFIG_DRIVER_NET_DESIGNWARE is not set
-# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
+# CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_BCMGENET is not set
+# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
# CONFIG_DRIVER_NET_ENC28J60 is not set
# CONFIG_DRIVER_NET_FSL_FMAN is not set
# CONFIG_DRIVER_NET_KS8851_MLL is not set
@@ -507,6 +513,7 @@ CONFIG_DRIVER_NET_MICREL=y
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
+# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_SMSC_PHY is not set
@@ -618,6 +625,7 @@ CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_GPIO=y
#
# Clocksource
@@ -634,6 +642,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_MC13XXX is not set
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_ATMEL_FLEXCOM is not set
+CONFIG_MFD_ATMEL_SMC=y
# end of Multifunction device drivers
#
@@ -685,6 +694,7 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_GENERIC_PLATFORM is not set
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
# end of GPIO
CONFIG_W1=y
@@ -737,6 +747,7 @@ CONFIG_REGULATOR_FIXED=y
# Firmware Drivers
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
+# CONFIG_QEMU_FW_CFG is not set
# end of Firmware Drivers
#
@@ -746,11 +757,16 @@ CONFIG_REGULATOR_FIXED=y
# end of FPGA Configuration Support
# CONFIG_GENERIC_PHY is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Hardware crypto devices
+#
+# end of Hardware crypto devices
#
# Memory controller drivers
#
+CONFIG_ATMEL_EBI=y
# end of Memory controller drivers
#
@@ -801,6 +817,7 @@ CONFIG_FS_EXT4=y
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
@@ -858,11 +875,11 @@ CONFIG_IMAGE_SPARSE=y
#
# end of Library gui routines
-# CONFIG_BAREBOX_LOGO is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
#
@@ -888,6 +905,7 @@ CONFIG_DIGEST_MD5_GENERIC=y
# Firmware files
#
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_MISSING_FIRMWARE_ERROR=y
# end of Firmware files
#
diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
index d4bd071..a183a3d 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config.diff
+++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
@@ -1,16 +1,20 @@
-503a2995018ed6b994350193b131ee59
+1dedd85e90c7b6ae44712caf6c69913b
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
+# CONFIG_ARCH_IMX is undefined
+# CONFIG_ARCH_MULTIARCH is not set
+# CONFIG_ARCH_OMAP_MULTI is undefined
+# CONFIG_ARCH_ROCKCHIP is undefined
CONFIG_ARCH_TEXT_BASE=0x23f00000
# CONFIG_ARM_AMBA is undefined
# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
-CONFIG_ARM_USE_COMPRESSED_DTB=y
CONFIG_AT91SAM9_SMC=y
CONFIG_AT91_MCI_PBL=y
CONFIG_AT91_MULTI_BOARDS=y
+CONFIG_ATMEL_EBI=y
# CONFIG_BOARD_ARM_GENERIC_DT is not set
# CONFIG_BOARD_GENERIC_DT is undefined
CONFIG_BOOTM_OFTREE_UIMAGE=y
@@ -49,9 +53,7 @@ CONFIG_COMPILE_LOGLEVEL=6
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_NONE=y
CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
-# CONFIG_DEFAULT_COMPRESSION_BZIP2 is undefined
-# CONFIG_DEFAULT_COMPRESSION_GZIP is undefined
-# CONFIG_DEFAULT_COMPRESSION_XZ is undefined
+# CONFIG_DEBUG_PBL is not set
# CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU is undefined
# CONFIG_DIGEST_SHA1_GENERIC is not set
CONFIG_DRIVER_NET_MACB=y
@@ -70,14 +72,15 @@ CONFIG_DRIVER_SPI_ATMEL=y
# CONFIG_GPIO_WATCHDOG is undefined
CONFIG_HAS_MACB=y
CONFIG_HAVE_AT91SAM9_RST=y
+CONFIG_HAVE_AT91_DDRAMC=y
CONFIG_HAVE_AT91_SMD=y
CONFIG_HAVE_AT91_USB_CLK=y
CONFIG_HAVE_AT91_UTMI=y
# CONFIG_HAVE_DIGEST_SHA1 is undefined
-CONFIG_HAVE_MACH_ARM_HEAD=y
# CONFIG_HWRNG is not set
# CONFIG_I2C is not set
# CONFIG_I2C_ALGOBIT is undefined
+# CONFIG_I2C_BCM283X is undefined
# CONFIG_I2C_DESIGNWARE is undefined
# CONFIG_I2C_GPIO is undefined
# CONFIG_I2C_MUX is undefined
@@ -93,14 +96,18 @@ CONFIG_IMD_TARGET=y
# CONFIG_MACH_AT91SAM9263EK is not set
# CONFIG_MACH_AT91SAM9X5EK is not set
CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
+# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set
# CONFIG_MACH_RPI2 is undefined
# CONFIG_MACH_RPI3 is undefined
+# CONFIG_MACH_RPI4 is undefined
# CONFIG_MACH_RPI is undefined
+# CONFIG_MACH_RPI_AARCH_32_64 is undefined
# CONFIG_MACH_RPI_CM3 is undefined
# CONFIG_MACH_RPI_COMMON is undefined
# CONFIG_MACH_SAMA5D27_GIANTBOARD is not set
# CONFIG_MACH_SAMA5D27_SOM1 is not set
# CONFIG_MACH_SAMA5D3_XPLAINED is not set
+# CONFIG_MACH_SAMA5D4_WIFX is not set
# CONFIG_MACH_SKOV_ARM9CPU is not set
CONFIG_MCI_ATMEL=y
CONFIG_MCI_ATMEL_PBL=y
@@ -111,20 +118,26 @@ CONFIG_MCI_ATMEL_SDHCI=y
CONFIG_MCI_MMC_BOOT_PARTITIONS=y
CONFIG_MCI_SDHCI=y
# CONFIG_MCI_STARTUP is not set
+# CONFIG_MEMTEST is undefined
# CONFIG_MENUTREE is undefined
# CONFIG_MFD_ACT8846 is undefined
+CONFIG_MFD_ATMEL_SMC=y
+# CONFIG_MFD_AXP20X_I2C is undefined
# CONFIG_MFD_DA9053 is undefined
# CONFIG_MFD_DA9063 is undefined
# CONFIG_MFD_LP3972 is undefined
# CONFIG_MFD_MC34704 is undefined
# CONFIG_MFD_MC9SDZ60 is undefined
+# CONFIG_MFD_RK808 is undefined
# CONFIG_MFD_RN568PMIC is undefined
+# CONFIG_MFD_ROHM_BD718XX is undefined
# CONFIG_MFD_STMPE is undefined
# CONFIG_MFD_STPMIC1 is undefined
CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TWL4030 is undefined
# CONFIG_MFD_TWL6030 is undefined
CONFIG_MICREL_PHY=y
+# CONFIG_MMUINFO is undefined
CONFIG_MTD_M25P80=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
@@ -147,6 +160,7 @@ CONFIG_REGULATOR_FIXED=y
# CONFIG_SERIAL_AMBA_PL011 is undefined
CONFIG_SOC_SAMA5=y
CONFIG_SOC_SAMA5D3=y
+CONFIG_SOC_SAMA5_MULTI=y
CONFIG_SPI_ATMEL_QUADSPI=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MEM=y
@@ -158,6 +172,7 @@ CONFIG_SPI_MEM=y
# CONFIG_SYSTEMD_OF_WATCHDOG is undefined
CONFIG_SYSTEM_PARTITIONS=y
# CONFIG_THUMB2_BAREBOX is undefined
+# CONFIG_TYPEC_TUSB320 is undefined
# CONFIG_USB_DWC2_GADGET is undefined
# CONFIG_USB_DWC2_HOST is undefined
# CONFIG_USB_DWC3 is undefined
@@ -167,10 +182,10 @@ CONFIG_USB_GADGET_DUALSPEED=y
# CONFIG_USB_HOST is not set
# CONFIG_USB_HUB_USB251XB is undefined
# CONFIG_USB_NET_AX88179_178A is undefined
+# CONFIG_USB_ONBOARD_HUB is undefined
# CONFIG_USB_STORAGE is undefined
# CONFIG_USB_ULPI is undefined
# CONFIG_USB_XHCI is undefined
-CONFIG_USE_COMPRESSED_DTB=y
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_MMIO is not set
CONFIG_W1=y
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
index 2caf92d..d2b7aa6 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.05.0 Configuration
+# Barebox/arm 2023.07.1-20230706-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -9,32 +9,29 @@ CONFIG_TEXT_BASE=0x0
#
# System Type
#
+CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DIGIC is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_OMAP_SINGLE is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_S3C24xx is not set
-# CONFIG_ARCH_S5PCxx is not set
-# CONFIG_ARCH_S3C64xx is not set
-# CONFIG_ARCH_STM32MP is not set
-# CONFIG_ARCH_VERSATILE is not set
-CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCH_ARM64_VIRT is not set
+# CONFIG_ARCH_BCM283X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_OMAP_MULTI is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_STM32MP is not set
+# CONFIG_ARCH_VERSATILE is not set
+CONFIG_ARCH_VEXPRESS=y
#
# Processor Type
@@ -48,7 +45,6 @@ CONFIG_CPU_32v7=y
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_ARCH_TEXT_BASE=0x0
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_MACH_VEXPRESS=y
# CONFIG_MACH_VIRT is not set
CONFIG_BOARD_ARM_GENERIC_DT=y
@@ -57,6 +53,9 @@ CONFIG_AEABI=y
# CONFIG_ARM_BOARD_APPEND_ATAG is not set
# end of System Type
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
+
#
# ARM specific settings
#
@@ -73,7 +72,7 @@ CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_HAS_CACHE=y
CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
CONFIG_FILETYPE=y
@@ -93,6 +92,7 @@ CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
CONFIG_MEMINFO=y
+CONFIG_MEMTEST=y
CONFIG_ENVIRONMENT_VARIABLES=y
CONFIG_GLOBALVAR=y
CONFIG_NVVAR=y
@@ -114,7 +114,8 @@ CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
+CONFIG_MMUINFO=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
@@ -177,10 +178,6 @@ CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
-# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
-# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set
-# CONFIG_DEFAULT_COMPRESSION_LZO is not set
-# CONFIG_DEFAULT_COMPRESSION_XZ is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
@@ -220,6 +217,7 @@ CONFIG_COMPILE_LOGLEVEL=7
CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
+# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
@@ -228,6 +226,7 @@ CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
+# CONFIG_WERROR is not set
# end of Debugging
#
@@ -249,6 +248,7 @@ CONFIG_COMPILE_HASH=y
# CONFIG_CMD_TUTORIAL is not set
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_DEVLOOKUP is not set
# CONFIG_CMD_DEVUNBIND is not set
CONFIG_CMD_DMESG=y
CONFIG_CMD_DRVINFO=y
@@ -319,6 +319,7 @@ CONFIG_CMD_DIRNAME=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_LN=y
CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
@@ -413,15 +414,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_BLOBGEN is not set
# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_OF_COMPATIBLE is not set
# CONFIG_CMD_OF_DIFF is not set
CONFIG_CMD_OF_DUMP=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP is not set
CONFIG_CMD_OF_FIXUP_STATUS=y
CONFIG_CMD_OF_OVERLAY=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
CONFIG_CMD_STATE=y
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
@@ -468,8 +472,9 @@ CONFIG_PHYLIB=y
#
# Network drivers
#
-# CONFIG_DRIVER_NET_DESIGNWARE is not set
-# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
+# CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_BCMGENET is not set
+# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
# CONFIG_DRIVER_NET_ENC28J60 is not set
# CONFIG_DRIVER_NET_FSL_FMAN is not set
# CONFIG_DRIVER_NET_KS8851_MLL is not set
@@ -493,6 +498,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
+# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_SMSC_PHY is not set
@@ -588,6 +594,8 @@ CONFIG_USB_STORAGE=y
# USB Miscellaneous drivers
#
# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_ONBOARD_HUB is not set
+# CONFIG_TYPEC_TUSB320 is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_AUTOSTART=y
@@ -624,6 +632,7 @@ CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_GPIO=y
#
# Clocksource
@@ -651,6 +660,9 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_RN568PMIC is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_ROHM_BD718XX is not set
# end of Multifunction device drivers
#
@@ -722,6 +734,7 @@ CONFIG_REGULATOR=y
#
# Firmware Drivers
#
+# CONFIG_QEMU_FW_CFG is not set
# end of Firmware Drivers
#
@@ -731,7 +744,11 @@ CONFIG_REGULATOR=y
# end of FPGA Configuration Support
# CONFIG_GENERIC_PHY is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Hardware crypto devices
+#
+# end of Hardware crypto devices
#
# Memory controller drivers
@@ -782,6 +799,7 @@ CONFIG_FS_EXT4=y
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
@@ -846,11 +864,11 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
-# CONFIG_BAREBOX_LOGO is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
#
@@ -877,6 +895,7 @@ CONFIG_DIGEST_SHA1_GENERIC=y
# Firmware files
#
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_MISSING_FIRMWARE_ERROR=y
# end of Firmware files
#
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
index ea72472..fff891e 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
@@ -1,16 +1,18 @@
-503a2995018ed6b994350193b131ee59
+1dedd85e90c7b6ae44712caf6c69913b
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
+# CONFIG_ARM_USE_COMPRESSED_DTB is undefined
# CONFIG_CFI_BUFFER_WRITE is not set
# CONFIG_CLOCKSOURCE_BCM283X is undefined
# CONFIG_CMD_GPIO is undefined
# CONFIG_CMD_SMC is undefined
CONFIG_CONSOLE_ACTIVATE_ALL=y
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+# CONFIG_DEBUG_PBL is not set
CONFIG_DRIVER_CFI=y
CONFIG_DRIVER_CFI_AMD=y
CONFIG_DRIVER_CFI_BANK_WIDTH_1=y
@@ -27,6 +29,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_GPIO_74XX_MMIO is undefined
# CONFIG_GPIO_DESIGNWARE is undefined
# CONFIG_GPIO_GENERIC_PLATFORM is undefined
+# CONFIG_GPIO_LATCH is undefined
# CONFIG_GPIO_PCA953X is undefined
# CONFIG_GPIO_PCF857X is undefined
# CONFIG_GPIO_PL061 is undefined
@@ -35,6 +38,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_GPIO_SX150X is undefined
# CONFIG_GPIO_WATCHDOG is undefined
# CONFIG_I2C_ALGOBIT is undefined
+# CONFIG_I2C_BCM283X is undefined
# CONFIG_I2C_GPIO is undefined
# CONFIG_JTAG is undefined
# CONFIG_KEYBOARD_GPIO is undefined
@@ -45,7 +49,9 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_LED_GPIO_RGB is undefined
# CONFIG_MACH_RPI2 is undefined
# CONFIG_MACH_RPI3 is undefined
+# CONFIG_MACH_RPI4 is undefined
# CONFIG_MACH_RPI is undefined
+# CONFIG_MACH_RPI_AARCH_32_64 is undefined
# CONFIG_MACH_RPI_CM3 is undefined
# CONFIG_MACH_RPI_COMMON is undefined
CONFIG_MACH_VEXPRESS=y
@@ -64,4 +70,5 @@ CONFIG_PROMPT="vexpress: "
# CONFIG_REGULATOR_FIXED is undefined
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SRAM=y
+# CONFIG_USE_COMPRESSED_DTB is undefined
# CONFIG_WATCHDOG_BCM2835 is undefined
diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
index 8b3a2f4..bbedcdb 100644
--- a/configs/platform-v7a_noneon/barebox.config
+++ b/configs/platform-v7a_noneon/barebox.config
@@ -1,40 +1,38 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2022.05.0 Configuration
+# Barebox/arm 2023.07.1-20230706-1 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
+CONFIG_ARM_USE_COMPRESSED_DTB=y
CONFIG_TEXT_BASE=0x0
#
# System Type
#
+CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_AT91 is not set
-CONFIG_ARCH_BCM283X=y
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_DIGIC is not set
# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_OMAP_SINGLE is not set
# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_SOCFPGA is not set
-# CONFIG_ARCH_S3C24xx is not set
-# CONFIG_ARCH_S5PCxx is not set
-# CONFIG_ARCH_S3C64xx is not set
-# CONFIG_ARCH_STM32MP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_VEXPRESS is not set
# CONFIG_ARCH_TEGRA is not set
# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
-# CONFIG_ARCH_ZYNQMP is not set
-# CONFIG_ARCH_ARM64_VIRT is not set
+CONFIG_ARCH_BCM283X=y
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_OMAP_MULTI is not set
+# CONFIG_ARCH_ROCKCHIP is not set
+# CONFIG_ARCH_STM32MP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_VEXPRESS is not set
#
# Processor Type
@@ -49,6 +47,7 @@ CONFIG_CPU_32v7=y
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_ARCH_TEXT_BASE=0x0
CONFIG_MACH_RPI_COMMON=y
+CONFIG_MACH_RPI_AARCH_32_64=y
#
# select Broadcom BCM283X boards to be built
@@ -57,15 +56,18 @@ CONFIG_MACH_RPI_COMMON=y
# CONFIG_MACH_RPI2 is not set
CONFIG_MACH_RPI3=y
# CONFIG_MACH_RPI_CM3 is not set
+# CONFIG_MACH_RPI4 is not set
# end of select Broadcom BCM283X boards to be built
-CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_BOARD_ARM_GENERIC_DT=y
CONFIG_AEABI=y
# CONFIG_THUMB2_BAREBOX is not set
# CONFIG_ARM_BOARD_APPEND_ATAG is not set
# end of System Type
+# CONFIG_64BIT is not set
+CONFIG_32BIT=y
+
#
# ARM specific settings
#
@@ -84,7 +86,7 @@ CONFIG_HAS_KALLSYMS=y
CONFIG_HAS_MODULES=y
CONFIG_HAS_CACHE=y
CONFIG_HAS_DMA=y
-CONFIG_HAS_ARCH_SJLJ=y
+CONFIG_ARCH_HAS_SJLJ=y
CONFIG_GENERIC_GPIO=y
CONFIG_BLOCK=y
CONFIG_BLOCK_WRITE=y
@@ -105,6 +107,7 @@ CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_BANNER=y
CONFIG_MEMINFO=y
+CONFIG_MEMTEST=y
CONFIG_ENVIRONMENT_VARIABLES=y
CONFIG_GLOBALVAR=y
CONFIG_NVVAR=y
@@ -117,6 +120,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y
CONFIG_HAVE_IMAGE_COMPRESSION=y
CONFIG_PBL_IMAGE=y
CONFIG_PBL_MULTI_IMAGES=y
+CONFIG_USE_COMPRESSED_DTB=y
CONFIG_PBL_RELOCATABLE=y
CONFIG_BOARD_GENERIC_DT=y
CONFIG_IMAGE_COMPRESSION=y
@@ -126,7 +130,8 @@ CONFIG_IMAGE_COMPRESSION_LZO=y
# CONFIG_IMAGE_COMPRESSION_XZKERN is not set
# CONFIG_IMAGE_COMPRESSION_NONE is not set
CONFIG_MMU=y
-CONFIG_MMU_EARLY=y
+CONFIG_MMUINFO=y
+CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
@@ -189,10 +194,6 @@ CONFIG_PARTITION_DISK_DOS=y
# CONFIG_PARTITION_DISK_EFI is not set
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
-# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
-# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set
-# CONFIG_DEFAULT_COMPRESSION_LZO is not set
-# CONFIG_DEFAULT_COMPRESSION_XZ is not set
CONFIG_DEFAULT_COMPRESSION_NONE=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
@@ -240,6 +241,7 @@ CONFIG_HAVE_ARCH_KASAN=y
CONFIG_CC_HAS_KASAN_GENERIC=y
# CONFIG_KASAN is not set
# CONFIG_COMPILE_TEST is not set
+# CONFIG_WERROR is not set
# end of Debugging
#
@@ -261,6 +263,7 @@ CONFIG_COMPILE_HASH=y
# CONFIG_CMD_TUTORIAL is not set
CONFIG_CMD_ARM_CPUINFO=y
CONFIG_CMD_DEVINFO=y
+# CONFIG_CMD_DEVLOOKUP is not set
# CONFIG_CMD_DEVUNBIND is not set
CONFIG_CMD_DMESG=y
CONFIG_CMD_DRVINFO=y
@@ -331,6 +334,7 @@ CONFIG_CMD_DIRNAME=y
CONFIG_CMD_FILETYPE=y
CONFIG_CMD_LN=y
CONFIG_CMD_LS=y
+# CONFIG_CMD_STAT is not set
CONFIG_CMD_MD5SUM=y
CONFIG_CMD_MKDIR=y
CONFIG_CMD_PWD=y
@@ -427,15 +431,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_BLOBGEN is not set
# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_OF_COMPATIBLE is not set
# CONFIG_CMD_OF_DIFF is not set
CONFIG_CMD_OF_DUMP=y
CONFIG_CMD_OF_NODE=y
CONFIG_CMD_OF_PROPERTY=y
# CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
+# CONFIG_CMD_OF_FIXUP is not set
CONFIG_CMD_OF_FIXUP_STATUS=y
CONFIG_CMD_OF_OVERLAY=y
CONFIG_CMD_OFTREE=y
CONFIG_CMD_TIME=y
+# CONFIG_CMD_UPTIME is not set
CONFIG_CMD_STATE=y
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
@@ -483,8 +490,9 @@ CONFIG_PHYLIB=y
#
# Network drivers
#
-# CONFIG_DRIVER_NET_DESIGNWARE is not set
-# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
+# CONFIG_DRIVER_NET_ARC_EMAC is not set
+# CONFIG_DRIVER_NET_BCMGENET is not set
+# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
# CONFIG_DRIVER_NET_ENC28J60 is not set
# CONFIG_DRIVER_NET_FSL_FMAN is not set
# CONFIG_DRIVER_NET_KS8851_MLL is not set
@@ -508,6 +516,7 @@ CONFIG_PHYLIB=y
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
+# CONFIG_MOTORCOMM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_SMSC_PHY is not set
@@ -544,6 +553,7 @@ CONFIG_I2C_ALGOBIT=y
# I2C Hardware Bus support
#
CONFIG_I2C_GPIO=y
+# CONFIG_I2C_BCM283X is not set
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_MV64XXX is not set
# end of I2C Hardware Bus support
@@ -600,6 +610,8 @@ CONFIG_USB_STORAGE=y
# USB Miscellaneous drivers
#
# CONFIG_USB_HUB_USB251XB is not set
+# CONFIG_USB_ONBOARD_HUB is not set
+# CONFIG_TYPEC_TUSB320 is not set
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_AUTOSTART=y
@@ -638,6 +650,7 @@ CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_GPIO=y
#
# Clocksource
@@ -665,6 +678,9 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_STPMIC1 is not set
# CONFIG_MFD_RN568PMIC is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
+# CONFIG_MFD_RK808 is not set
+# CONFIG_MFD_AXP20X_I2C is not set
+# CONFIG_MFD_ROHM_BD718XX is not set
# end of Multifunction device drivers
#
@@ -730,6 +746,7 @@ CONFIG_GPIOLIB=y
# CONFIG_GPIO_DESIGNWARE is not set
# CONFIG_GPIO_SX150X is not set
# CONFIG_GPIO_SIFIVE is not set
+# CONFIG_GPIO_LATCH is not set
# end of GPIO
# CONFIG_W1 is not set
@@ -767,6 +784,7 @@ CONFIG_REGULATOR_BCM283X=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_QEMU_FW_CFG is not set
# end of Firmware Drivers
#
@@ -776,7 +794,11 @@ CONFIG_REGULATOR_BCM283X=y
# end of FPGA Configuration Support
# CONFIG_GENERIC_PHY is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Hardware crypto devices
+#
+# end of Hardware crypto devices
#
# Memory controller drivers
@@ -829,6 +851,7 @@ CONFIG_FS_EXT4=y
CONFIG_FS_RAMFS=y
CONFIG_FS_DEVFS=y
CONFIG_FS_TFTP=y
+CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
CONFIG_FS_NFS=y
CONFIG_FS_FAT=y
CONFIG_FS_FAT_WRITE=y
@@ -893,11 +916,11 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
-# CONFIG_BAREBOX_LOGO is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
+CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
#
@@ -924,6 +947,7 @@ CONFIG_DIGEST_SHA1_GENERIC=y
# Firmware files
#
CONFIG_EXTRA_FIRMWARE_DIR="firmware"
+CONFIG_MISSING_FIRMWARE_ERROR=y
# end of Firmware files
#
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
new file mode 100644
index 0000000..1afe828
--- /dev/null
+++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
@@ -0,0 +1,32 @@
+From: Oleksij Rempel <o.rempel@pengutronix.de>
+Date: Thu, 6 Jul 2023 09:04:40 +0200
+Subject: [PATCH] ARM: at91: enable ddramc for sama5d3 and sama5d4
+
+ddramc has already support for sama5d3 and sama5d4, so enable it
+officially.
+
+Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
+---
+ arch/arm/mach-at91/Kconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
+index b803a1185d20..349586b68339 100644
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -104,6 +104,7 @@ config SOC_SAMA5D3
+ select HAVE_AT91_UTMI
+ select PINCTRL_AT91
+ select HAS_MACB
++ select HAVE_AT91_DDRAMC
+
+ config SOC_SAMA5D4
+ bool
+@@ -116,6 +117,7 @@ config SOC_SAMA5D4
+ select HAVE_AT91_UTMI
+ select PINCTRL_AT91
+ select HAS_MACB
++ select HAVE_AT91_DDRAMC
+
+ config SOC_SAM9X60
+ bool
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
new file mode 100644
index 0000000..7aeec24
--- /dev/null
+++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
@@ -0,0 +1,219 @@
+From: Oleksij Rempel <o.rempel@pengutronix.de>
+Date: Tue, 4 Jul 2023 06:35:09 +0200
+Subject: [PATCH] ARM: at91: add support for SAMA5D3 - Ethernet Development
+ System Board
+
+Microchip Technology SAMA5D3 Ethernet Development System (EDS) Board
+(DM320114) is an MPU-based platform for evaluating Ethernet Switch and
+PHY products. Compatible Ethernet Switch and PHY Evaluation Boards
+connect to the SAMA5D3 EDS Board via either an RGMII or RMII connector.
+The Microchip Technology SAMA5D3 EDS Board is not intended for
+stand-alone use and has no Ethernet capabilities when no daughter board
+or an USB Ethernet adapter is connected.
+
+For more information see:
+https://www.microchip.com/en-us/development-tool/DM320114
+
+Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
+---
+ Documentation/boards/at91.rst | 2 +
+ arch/arm/boards/Makefile | 1 +
+ arch/arm/boards/microchip-sama5d3-eds/Makefile | 3 ++
+ arch/arm/boards/microchip-sama5d3-eds/lowlevel.c | 62 ++++++++++++++++++++++++
+ arch/arm/configs/at91_multi_defconfig | 1 +
+ arch/arm/dts/Makefile | 1 +
+ arch/arm/dts/at91-microchip-sama5d3-eds.dts | 14 ++++++
+ arch/arm/mach-at91/Kconfig | 10 ++++
+ images/Makefile.at91 | 9 ++++
+ 9 files changed, 103 insertions(+)
+ create mode 100644 arch/arm/boards/microchip-sama5d3-eds/Makefile
+ create mode 100644 arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
+ create mode 100644 arch/arm/dts/at91-microchip-sama5d3-eds.dts
+
+diff --git a/Documentation/boards/at91.rst b/Documentation/boards/at91.rst
+index f502979df6eb..961ef58d84ac 100644
+--- a/Documentation/boards/at91.rst
++++ b/Documentation/boards/at91.rst
+@@ -35,6 +35,8 @@ The resulting images will be placed under ``images/``:
+ barebox-at91sam9263ek.img
+ barebox-microchip-ksz9477-evb.img
+ barebox-microchip-ksz9477-evb-xload-mmc.img
++ barebox-microchip-sama5d3-eds.img
++ barebox-microchip-sama5d3-eds-xload-mmc.img
+ barebox-sama5d3-xplained.img
+ barebox-sama5d3-xplained-xload-mmc.img
+ barebox-sama5d27-som1-ek.img
+diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
+index 2877debad535..382e649fce62 100644
+--- a/arch/arm/boards/Makefile
++++ b/arch/arm/boards/Makefile
+@@ -121,6 +121,7 @@ obj-$(CONFIG_MACH_SAMA5D27_SOM1) += sama5d27-som1/
+ obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/
+ obj-$(CONFIG_MACH_SAMA5D3_XPLAINED) += sama5d3_xplained/
+ obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/
++obj-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += microchip-sama5d3-eds/
+ obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/
+ obj-$(CONFIG_MACH_SAMA5D4_WIFX) += sama5d4_wifx/
+ obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/
+diff --git a/arch/arm/boards/microchip-sama5d3-eds/Makefile b/arch/arm/boards/microchip-sama5d3-eds/Makefile
+new file mode 100644
+index 000000000000..458f5209008d
+--- /dev/null
++++ b/arch/arm/boards/microchip-sama5d3-eds/Makefile
+@@ -0,0 +1,3 @@
++# SPDX-License-Identifier: GPL-2.0-only
++
++lwl-y += lowlevel.o
+diff --git a/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
+new file mode 100644
+index 000000000000..79346a9b6ac1
+--- /dev/null
++++ b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
+@@ -0,0 +1,62 @@
++// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause
++/*
++ * Copyright (C) 2014, Atmel Corporation
++ * Copyright (C) 2018 Ahmad Fatoum, Pengutronix
++ */
++
++#include <common.h>
++#include <init.h>
++
++#include <asm/barebox-arm-head.h>
++#include <debug_ll.h>
++#include <mach/at91/barebox-arm.h>
++#include <mach/at91/iomux.h>
++#include <mach/at91/sama5d3.h>
++#include <mach/at91/sama5d3-xplained-ddramc.h>
++#include <mach/at91/xload.h>
++
++/* PCK = 528MHz, MCK = 132MHz */
++#define MASTER_CLOCK 132000000
++
++static void dbgu_init(void)
++{
++ void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB);
++
++ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_PIOB);
++
++ at91_mux_pio3_pin(pio, pin_to_mask(AT91_PIN_PB31), AT91_MUX_PERIPH_A, 0);
++
++ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_DBGU);
++ at91_dbgu_setup_ll(IOMEM(AT91_BASE_DBGU1), MASTER_CLOCK, 115200);
++
++ putc_ll('>');
++}
++
++SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds_xload_mmc, r4)
++{
++ sama5d3_lowlevel_init();
++
++ relocate_to_current_adr();
++ setup_c();
++
++ sama5d3_udelay_init(MASTER_CLOCK);
++ sama5d3_xplained_ddrconf();
++ if (IS_ENABLED(CONFIG_DEBUG_LL))
++ dbgu_init();
++
++ sama5d3_atmci_start_image(0, MASTER_CLOCK, 0);
++}
++
++extern char __dtb_z_at91_microchip_sama5d3_eds_start[];
++
++SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds, r4)
++{
++ void *fdt;
++
++ if (IS_ENABLED(CONFIG_DEBUG_LL))
++ dbgu_init();
++
++ fdt = __dtb_z_at91_microchip_sama5d3_eds_start + get_runtime_offset();
++
++ sama5d3_barebox_entry(r4, fdt);
++}
+diff --git a/arch/arm/configs/at91_multi_defconfig b/arch/arm/configs/at91_multi_defconfig
+index c93c2f578609..de47af3bd0a6 100644
+--- a/arch/arm/configs/at91_multi_defconfig
++++ b/arch/arm/configs/at91_multi_defconfig
+@@ -4,6 +4,7 @@ CONFIG_MACH_SKOV_ARM9CPU=y
+ CONFIG_MACH_AT91SAM9263EK=y
+ CONFIG_MACH_AT91SAM9X5EK=y
+ CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
++CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
+ CONFIG_MACH_SAMA5D3_XPLAINED=y
+ CONFIG_MACH_SAMA5D27_SOM1=y
+ CONFIG_MACH_SAMA5D27_GIANTBOARD=y
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 98f4c4e0194b..eb9e0e062adf 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -193,6 +193,7 @@ lwl-$(CONFIG_MACH_AC_SXB) += ac-sxb.dtb.o
+ lwl-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
+ lwl-$(CONFIG_MACH_SAMA5D3_XPLAINED) += at91-sama5d3_xplained.dtb.o
+ lwl-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
++lwl-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += at91-microchip-sama5d3-eds.dtb.o
+ lwl-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
+ lwl-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
+ lwl-$(CONFIG_MACH_SAMA5D4_WIFX) += at91-sama5d4_wifx_l1.dtb.o
+diff --git a/arch/arm/dts/at91-microchip-sama5d3-eds.dts b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
+new file mode 100644
+index 000000000000..ad75fc882c63
+--- /dev/null
++++ b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
+@@ -0,0 +1,14 @@
++/* SPDX-License-Identifier: GPL-2.0 */
++/dts-v1/;
++#include <arm/at91-sama5d3_eds.dts>
++#include "sama5d3.dtsi"
++
++/ {
++ chosen {
++ environment {
++ compatible = "barebox,environment";
++ device-path = &mmc0, "partname:0";
++ file-path = "barebox.env";
++ };
++ };
++};
+diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
+index 349586b68339..d2499747252d 100644
+--- a/arch/arm/mach-at91/Kconfig
++++ b/arch/arm/mach-at91/Kconfig
+@@ -606,6 +606,16 @@ config MACH_MICROCHIP_KSZ9477_EVB
+ help
+ Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
+
++config MACH_MICROCHIP_SAMA5D3_EDS
++ bool "Microchip SAMA5D3 Ethernet Development System"
++ select SOC_SAMA5D3
++ select OFDEVICE
++ select MCI_ATMEL_PBL
++ select COMMON_CLK_OF_PROVIDER
++ help
++ Select this if you are using Microchip's SAMA5D3 Ethernet Development
++ System.
++
+ config MACH_SAMA5D3_XPLAINED
+ bool "Atmel SAMA5D3_XPLAINED Evaluation Kit"
+ select SOC_SAMA5D3
+diff --git a/images/Makefile.at91 b/images/Makefile.at91
+index 19a81e2e9a3c..36f725940639 100644
+--- a/images/Makefile.at91
++++ b/images/Makefile.at91
+@@ -20,6 +20,15 @@ MAX_PBL_IMAGE_SIZE_start_sama5d3_xplained_ung8071_xload_mmc = 0xffff
+ FILE_barebox-microchip-ksz9477-evb-xload-mmc.img = start_sama5d3_xplained_ung8071_xload_mmc.pblb
+ image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-xload-mmc.img
+
++pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds
++FILE_barebox-microchip-sama5d3-eds.img = start_microchip_sama5d3_eds.pblb
++image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds.img
++
++pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds_xload_mmc
++MAX_PBL_IMAGE_SIZE_start_microchip_sama5d3_eds_xload_mmc = 0xffff
++FILE_barebox-microchip-sama5d3-eds-xload-mmc.img = start_microchip_sama5d3_eds_xload_mmc.pblb
++image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds-xload-mmc.img
++
+ pblb-$(CONFIG_MACH_SAMA5D3_XPLAINED) += start_sama5d3_xplained
+ FILE_barebox-sama5d3-xplained.img = start_sama5d3_xplained.pblb
+ image-$(CONFIG_MACH_SAMA5D3_XPLAINED) += barebox-sama5d3-xplained.img
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
new file mode 100644
index 0000000..519ea4a
--- /dev/null
+++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
@@ -0,0 +1,23 @@
+From: Oleksij Rempel <o.rempel@pengutronix.de>
+Date: Thu, 6 Jul 2023 09:26:22 +0200
+Subject: [PATCH] ARM: at91: microchip-ksz9477-evb: migrate to
+ sama5d3_barebox_entry()
+
+We have sama5d3_barebox_entry(), so make use of it.
+
+Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
+---
+ arch/arm/boards/microchip-ksz9477-evb/lowlevel.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
+index bda6a94160a5..aa2161daeef0 100644
+--- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
++++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
+@@ -58,5 +58,5 @@ SAMA5D3_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r4)
+
+ fdt = __dtb_z_at91_microchip_ksz9477_evb_start + get_runtime_offset();
+
+- barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt);
++ sama5d3_barebox_entry(r4, fdt);
+ }
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
new file mode 100644
index 0000000..d6e6193
--- /dev/null
+++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
@@ -0,0 +1,22 @@
+From: Oleksij Rempel <o.rempel@pengutronix.de>
+Date: Thu, 6 Jul 2023 11:03:50 +0200
+Subject: [PATCH] Release
+ 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
+
+---
+ Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/Makefile b/Makefile
+index 92b5c6779a52..323f757908bc 100644
+--- a/Makefile
++++ b/Makefile
+@@ -2,7 +2,7 @@
+ VERSION = 2023
+ PATCHLEVEL = 07
+ SUBLEVEL = 1
+-EXTRAVERSION =
++EXTRAVERSION =-20230706-1
+ NAME = None
+
+ # *DOCUMENTATION*
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
new file mode 100644
index 0000000..bdd8894
--- /dev/null
+++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
@@ -0,0 +1,13 @@
+# umpf-base: v2023.07.1
+# umpf-name: 2023.07.0/customers/pengutronix/distrokit-sama5d3
+# umpf-version: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
+# umpf-topic: v2023.07.0/topic/microchip-sama5d3-ether-dev-sys
+# umpf-hashinfo: 8a1d1b8e7204ee57b743ae7f1325d5729104425e
+# umpf-topic-range: 0186c17838e655dbf6a3bcd01fa74821d5e67ae6..b2883ce6100ca0f8259a1726bf53387e6da04a99
+0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
+0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
+0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
+# umpf-release: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
+# umpf-topic-range: b2883ce6100ca0f8259a1726bf53387e6da04a99..eaaffd9164ab19a152d00c6d5f8f91cd07e5ec48
+0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
+# umpf-end
diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig
index 784f35d..160c422 100644
--- a/configs/platform-v7a_noneon/platformconfig
+++ b/configs/platform-v7a_noneon/platformconfig
@@ -180,8 +180,8 @@ PTXCONF_CONSOLE_SPEED="115200"
# PTXCONF_AT91BOOTSTRAP2 is not set
PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2022.05.0"
-PTXCONF_BAREBOX_COMMON_MD5="2bf7e136b3bfb59179f154ee096ef716"
+PTXCONF_BAREBOX_COMMON_VERSION="2023.07.1"
+PTXCONF_BAREBOX_COMMON_MD5="0b7ea966cd01266a93a4ccfa7d68bce0"
PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
PTXCONF_BAREBOX_AT91=y
PTXCONF_BAREBOX_VEXPRESS=y
--
2.39.2
next reply other threads:[~2023-07-06 11:44 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-06 11:44 Oleksij Rempel [this message]
2023-07-06 11:44 ` [DistroKit] [PATCH v1 2/5] v7a_noneon: use upstreamed devicetree the KSZ9477 EVB Oleksij Rempel
2023-07-06 12:22 ` Ahmad Fatoum
2023-07-06 11:44 ` [DistroKit] [PATCH v1 3/5] v7a_noneon: add Microchip SAMA5D3 Ethernet Delopment System Board support Oleksij Rempel
2023-07-06 12:50 ` Ahmad Fatoum
2023-07-07 10:26 ` Oleksij Rempel
2023-07-06 11:44 ` [DistroKit] [PATCH v1 4/5] v7a_noneon: kernel: make KSZ9477 work again Oleksij Rempel
2023-07-06 12:51 ` Ahmad Fatoum
2023-07-07 10:25 ` Oleksij Rempel
2023-07-06 11:44 ` [DistroKit] [PATCH v1 5/5] v7a_noneon: kernel: enable Microchip LAN9370 T1 PHY support Oleksij Rempel
2023-07-06 12:52 ` Ahmad Fatoum
2023-07-06 12:20 ` [DistroKit] [PATCH v1 1/5] v7a_noneon: barebox: version bump v2023.01.0 → v2023.07.1 Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230706114434.1751248-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox