From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: distrokit@pengutronix.de
Subject: [DistroKit] [PATCH 0/7] v8a: imx8m: build image for i.MX8M Nano
Date: Fri, 28 Jul 2023 18:49:26 +0200 [thread overview]
Message-ID: <20230728164933.342061-1-a.fatoum@pengutronix.de> (raw)
Kernel is already configured to support booting on i.MX8MN
and all other components just need little tweaking in order
for DistroKit to build a full SD-Card image for it, so let's do it.
This was tested on a DDR4 i.MX8MN EVK, but it should work equally
well on the LPDDR4 variant.
I have a spare DDR4 EVK here, so I'll add it to CI once this PR is
merged, so v8a CI is not limited to Rock-3A and there is at long
last some automated on-device testing for DistroKit on i.MX8M.
Ahmad Fatoum (7):
v8a: imx8m: tf-a: build for i.MX8M Nano as well
v8a: imx8m: imx-firmware: install DDR4 PHY firmware
v8a: barebox: enable i.MX8M Nano EVK support
v8a: imx8m: use common genimage configuration
v8a: imx8m: genimage: switch from MBR to GPT images
v8a: imx8m: include i.MX8MN DDR4 and LPDDR4 EVK DT in rootfs
v8a: imx8m: genimage: build i.MX8M Nano SD/eMMC image
configs/platform-v8a/barebox.config | 5 ++-
.../platform-v8a/config/images/imx8m.config | 17 +++++++++
.../config/images/imx8mm-evk.config | 17 ---------
.../config/images/imx8mp-evk.config | 17 ---------
.../config/images/imx8mq-evk.config | 17 ---------
configs/platform-v8a/platformconfig | 5 +--
.../platforms/image-imx8mn-evk.in | 10 ++++++
configs/platform-v8a/rules/firmware-imx.make | 10 ++++++
.../platform-v8a/rules/image-imx8mm-evk.make | 5 ++-
.../platform-v8a/rules/image-imx8mn-evk.make | 35 +++++++++++++++++++
.../platform-v8a/rules/image-imx8mp-evk.make | 5 ++-
.../platform-v8a/rules/image-imx8mq-evk.make | 5 ++-
12 files changed, 91 insertions(+), 57 deletions(-)
create mode 100644 configs/platform-v8a/config/images/imx8m.config
delete mode 100644 configs/platform-v8a/config/images/imx8mm-evk.config
delete mode 100644 configs/platform-v8a/config/images/imx8mp-evk.config
delete mode 100644 configs/platform-v8a/config/images/imx8mq-evk.config
create mode 100644 configs/platform-v8a/platforms/image-imx8mn-evk.in
create mode 100644 configs/platform-v8a/rules/image-imx8mn-evk.make
--
2.39.2
next reply other threads:[~2023-07-28 16:49 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-28 16:49 Ahmad Fatoum [this message]
2023-07-28 16:49 ` [DistroKit] [PATCH 1/7] v8a: imx8m: tf-a: build for i.MX8M Nano as well Ahmad Fatoum
2023-07-28 16:49 ` [DistroKit] [PATCH 2/7] v8a: imx8m: imx-firmware: install DDR4 PHY firmware Ahmad Fatoum
2023-07-28 16:49 ` [DistroKit] [PATCH 3/7] v8a: barebox: enable i.MX8M Nano EVK support Ahmad Fatoum
2023-07-28 16:49 ` [DistroKit] [PATCH 4/7] v8a: imx8m: use common genimage configuration Ahmad Fatoum
2023-07-28 16:49 ` [DistroKit] [PATCH 5/7] v8a: imx8m: genimage: switch from MBR to GPT images Ahmad Fatoum
2023-07-28 16:49 ` [DistroKit] [PATCH 6/7] v8a: imx8m: include i.MX8MN DDR4 and LPDDR4 EVK DT in rootfs Ahmad Fatoum
2023-07-28 16:49 ` [DistroKit] [PATCH 7/7] v8a: imx8m: genimage: build i.MX8M Nano SD/eMMC image Ahmad Fatoum
2023-08-13 19:39 ` [DistroKit] [PATCH 0/7] v8a: imx8m: build image for i.MX8M Nano Roland Hieber
2023-08-15 9:51 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230728164933.342061-1-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox