Re: [DistroKit] [PATCH 0/7] v8a: imx8m: build image for i.MX8M Nano

[Roland Hieber <rhi@pengutronix.de>]

On Fri, Jul 28, 2023 at 06:49:26PM +0200, Ahmad Fatoum wrote:
> Kernel is already configured to support booting on i.MX8MN
> and all other components just need little tweaking in order
> for DistroKit to build a full SD-Card image for it, so let's do it.
> 
> This was tested on a DDR4 i.MX8MN EVK, but it should work equally
> well on the LPDDR4 variant.
> 
> I have a spare DDR4 EVK here, so I'll add it to CI once this PR is
> merged, so v8a CI is not limited to Rock-3A and there is at long
> last some automated on-device testing for DistroKit on i.MX8M.
> 
> Ahmad Fatoum (7):
>   v8a: imx8m: tf-a: build for i.MX8M Nano as well
>   v8a: imx8m: imx-firmware: install DDR4 PHY firmware
>   v8a: barebox: enable i.MX8M Nano EVK support
>   v8a: imx8m: use common genimage configuration
>   v8a: imx8m: genimage: switch from MBR to GPT images
>   v8a: imx8m: include i.MX8MN DDR4 and LPDDR4 EVK DT in rootfs
>   v8a: imx8m: genimage: build i.MX8M Nano SD/eMMC image

Reviewed-by: Roland Hieber <rhi@pengutronix.de>

>  configs/platform-v8a/barebox.config           |  5 ++-
>  .../platform-v8a/config/images/imx8m.config   | 17 +++++++++
>  .../config/images/imx8mm-evk.config           | 17 ---------
>  .../config/images/imx8mp-evk.config           | 17 ---------
>  .../config/images/imx8mq-evk.config           | 17 ---------
>  configs/platform-v8a/platformconfig           |  5 +--
>  .../platforms/image-imx8mn-evk.in             | 10 ++++++
>  configs/platform-v8a/rules/firmware-imx.make  | 10 ++++++
>  .../platform-v8a/rules/image-imx8mm-evk.make  |  5 ++-
>  .../platform-v8a/rules/image-imx8mn-evk.make  | 35 +++++++++++++++++++
>  .../platform-v8a/rules/image-imx8mp-evk.make  |  5 ++-
>  .../platform-v8a/rules/image-imx8mq-evk.make  |  5 ++-
>  12 files changed, 91 insertions(+), 57 deletions(-)
>  create mode 100644 configs/platform-v8a/config/images/imx8m.config
>  delete mode 100644 configs/platform-v8a/config/images/imx8mm-evk.config
>  delete mode 100644 configs/platform-v8a/config/images/imx8mp-evk.config
>  delete mode 100644 configs/platform-v8a/config/images/imx8mq-evk.config
>  create mode 100644 configs/platform-v8a/platforms/image-imx8mn-evk.in
>  create mode 100644 configs/platform-v8a/rules/image-imx8mn-evk.make
> 
> -- 
> 2.39.2
> 
> 
> 

-- 
Roland Hieber, Pengutronix e.K.          | r.hieber@pengutronix.de     |
Steuerwalder Str. 21                     | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686         | Fax:   +49-5121-206917-5555 |