* [DistroKit] [PATCH v2 2/6] images: use 'partition-table-type' option instead of 'partition-table'
2023-10-11 10:50 [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
@ 2023-10-11 10:50 ` Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 3/6] v7a: barebox: pass root=mmcblkXpN instead of root=PARTUUID=… to kernel Roland Hieber
` (4 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Roland Hieber @ 2023-10-11 10:50 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
genimage v16 complains that 'partition-table = false' is deprecated in
favour of 'partition-table-type = none'.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
PATCH v2: no change
PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-2-rhi@pengutronix.de
---
configs/platform-v7a/config/images/vexpress-nor.config | 2 +-
configs/platform-v7a_noneon/config/images/vexpress-nor.config | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/configs/platform-v7a/config/images/vexpress-nor.config b/configs/platform-v7a/config/images/vexpress-nor.config
index 790ee5fac1dd..cc7edd28f628 100644
--- a/configs/platform-v7a/config/images/vexpress-nor.config
+++ b/configs/platform-v7a/config/images/vexpress-nor.config
@@ -1,6 +1,6 @@
image @IMAGE@ {
hdimage {
- partition-table = false
+ partition-table-type = none
}
partition barebox {
image = barebox-vexpress-ca9.img
diff --git a/configs/platform-v7a_noneon/config/images/vexpress-nor.config b/configs/platform-v7a_noneon/config/images/vexpress-nor.config
index 790ee5fac1dd..cc7edd28f628 100644
--- a/configs/platform-v7a_noneon/config/images/vexpress-nor.config
+++ b/configs/platform-v7a_noneon/config/images/vexpress-nor.config
@@ -1,6 +1,6 @@
image @IMAGE@ {
hdimage {
- partition-table = false
+ partition-table-type = none
}
partition barebox {
image = barebox-vexpress-ca9.img
--
2.39.2
^ permalink raw reply [flat|nested] 7+ messages in thread* [DistroKit] [PATCH v2 3/6] v7a: barebox: pass root=mmcblkXpN instead of root=PARTUUID=… to kernel
2023-10-11 10:50 [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 2/6] images: use 'partition-table-type' option instead of 'partition-table' Roland Hieber
@ 2023-10-11 10:50 ` Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 4/6] v7a: barebox: enable GUID Partition Table support Roland Hieber
` (3 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Roland Hieber @ 2023-10-11 10:50 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
Kernels prior to v5.10-rc1 could not ensure deterministic ordering for
MMC devices. For this reason, the default 'append-root' behaviour of
barebox for MMC block devices is to append a 'root=PARTUUID=XYZ' option
to the kernel command line. The PARTUUID is derived from the partition
table and is expected to be unique system-wide. This is however
susceptible to breakage if the exact same image is written to different
boot media in the system, e.g. SD and eMMC, so the PARTUUID will no
longer uniquely refer to a single partition.
Newer kernel versions honor the numbering used for 'mmc' aliases,
which makes 'root=mmcblkXpN' deterministic as long as barebox and
kernel aliases are identical. Since we're using kernel 6.4, enable this
option in barebox.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
PATCH v2: no change
PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-3-rhi@pengutronix.de
---
configs/platform-v7a/barebox-am335x.config | 2 +-
configs/platform-v7a/barebox-am335x.config.diff | 2 +-
configs/platform-v7a/barebox-at91.config | 2 +-
configs/platform-v7a/barebox-at91.config.diff | 2 +-
configs/platform-v7a/barebox-mx6.config | 2 +-
configs/platform-v7a/barebox-mx6.config.diff | 2 +-
configs/platform-v7a/barebox-rpi2.config | 2 +-
configs/platform-v7a/barebox-rpi2.config.diff | 2 +-
configs/platform-v7a/barebox-stm32mp.config | 2 +-
configs/platform-v7a/barebox-stm32mp.config.diff | 2 +-
configs/platform-v7a/barebox-vexpress.config | 2 +-
configs/platform-v7a/barebox-vexpress.config.diff | 2 +-
configs/platform-v7a/barebox.config | 2 +-
configs/platform-v7a_noneon/barebox-at91.config | 2 +-
configs/platform-v7a_noneon/barebox-at91.config.diff | 2 +-
configs/platform-v7a_noneon/barebox-vexpress.config | 2 +-
configs/platform-v7a_noneon/barebox-vexpress.config.diff | 2 +-
configs/platform-v7a_noneon/barebox.config | 2 +-
18 files changed, 18 insertions(+), 18 deletions(-)
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 30a58497bc95..90e7756dabae 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -180,7 +180,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index 81e857d116e0..eeb39d3ffc0f 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-e1ec3277facf26f7ecc5fc49c9c31515
+767c9d2f029195d89d541b1de6347271
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
# CONFIG_AM33XX_NET_BOOT is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index 5dc6ec9dc51d..a9758bee288f 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -191,7 +191,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index 937c41987be2..e90f18cb58e0 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-e1ec3277facf26f7ecc5fc49c9c31515
+767c9d2f029195d89d541b1de6347271
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
CONFIG_ARCH_AT91=y
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index 0484d35e5087..8e8f0d78cef0 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -251,7 +251,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 93775f6509cf..f1308c66847c 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-e1ec3277facf26f7ecc5fc49c9c31515
+767c9d2f029195d89d541b1de6347271
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
# CONFIG_ARCH_BCM283X is not set
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 95de61f1c6b8..57250e40b6b6 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -179,7 +179,7 @@ CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 058f595cc787..6f8705a94859 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,4 +1,4 @@
-e1ec3277facf26f7ecc5fc49c9c31515
+767c9d2f029195d89d541b1de6347271
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_BOOTCHOOSER=y
CONFIG_CMD_BOOTCHOOSER=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
index 08a21f50c00e..af3552c4344b 100644
--- a/configs/platform-v7a/barebox-stm32mp.config
+++ b/configs/platform-v7a/barebox-stm32mp.config
@@ -170,7 +170,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index e951f3824fd3..034c89223848 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-e1ec3277facf26f7ecc5fc49c9c31515
+767c9d2f029195d89d541b1de6347271
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
# CONFIG_ARCH_BCM283X is not set
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 433c73be691c..1024c9d5f2bf 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -157,7 +157,7 @@ CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index ff170d222b86..1fce564357f0 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-e1ec3277facf26f7ecc5fc49c9c31515
+767c9d2f029195d89d541b1de6347271
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
CONFIG_AMBA_SP804=y
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index 27a6373837b0..f4d9cd21b11c 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -178,7 +178,7 @@ CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
index d66e099ecada..600417a314df 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config
+++ b/configs/platform-v7a_noneon/barebox-at91.config
@@ -180,7 +180,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
CONFIG_SYSTEM_PARTITIONS=y
CONFIG_IMD=y
diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
index 29584321f023..9a5ff84cf648 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config.diff
+++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-1dedd85e90c7b6ae44712caf6c69913b
+4843d0dbea5da5cc603015348ad891de
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_IMX is undefined
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
index d2b7aa6c0073..cf504a6c606c 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config
@@ -158,7 +158,7 @@ CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
# CONFIG_SYSTEM_PARTITIONS is not set
CONFIG_IMD=y
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
index fff891e02b70..2215ceb876cc 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-1dedd85e90c7b6ae44712caf6c69913b
+4843d0dbea5da5cc603015348ad891de
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
index bbedcdb2d650..908bf1fe8d3f 100644
--- a/configs/platform-v7a_noneon/barebox.config
+++ b/configs/platform-v7a_noneon/barebox.config
@@ -174,7 +174,7 @@ CONFIG_BOOTM_OFTREE=y
# CONFIG_BOOTM_FITIMAGE is not set
CONFIG_BLSPEC=y
CONFIG_FLEXIBLE_BOOTARGS=y
-# CONFIG_MMCBLKDEV_ROOTARG is not set
+CONFIG_MMCBLKDEV_ROOTARG=y
CONFIG_BAREBOX_UPDATE=y
# CONFIG_SYSTEM_PARTITIONS is not set
CONFIG_IMD=y
--
2.39.2
^ permalink raw reply [flat|nested] 7+ messages in thread* [DistroKit] [PATCH v2 4/6] v7a: barebox: enable GUID Partition Table support
2023-10-11 10:50 [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 2/6] images: use 'partition-table-type' option instead of 'partition-table' Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 3/6] v7a: barebox: pass root=mmcblkXpN instead of root=PARTUUID=… to kernel Roland Hieber
@ 2023-10-11 10:50 ` Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 5/6] images: remove qemu size hack Roland Hieber
` (2 subsequent siblings)
5 siblings, 0 replies; 7+ messages in thread
From: Roland Hieber @ 2023-10-11 10:50 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
We want to be able to boot from devices formatted with GPT, enable this
on the platforms that don't have it yet.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
PATCH v2: no change
PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-4-rhi@pengutronix.de
---
configs/platform-v7a/barebox-am335x.config | 5 ++++-
configs/platform-v7a/barebox-am335x.config.diff | 2 +-
configs/platform-v7a/barebox-at91.config | 5 ++++-
configs/platform-v7a/barebox-at91.config.diff | 2 +-
configs/platform-v7a/barebox-mx6.config.diff | 6 +-----
configs/platform-v7a/barebox-rpi2.config | 5 ++++-
configs/platform-v7a/barebox-rpi2.config.diff | 2 +-
configs/platform-v7a/barebox-stm32mp.config.diff | 4 +---
configs/platform-v7a/barebox-vexpress.config | 5 ++++-
configs/platform-v7a/barebox-vexpress.config.diff | 2 +-
configs/platform-v7a/barebox.config | 5 ++++-
configs/platform-v7a_noneon/barebox-at91.config | 5 ++++-
configs/platform-v7a_noneon/barebox-at91.config.diff | 2 +-
configs/platform-v7a_noneon/barebox-vexpress.config | 5 ++++-
configs/platform-v7a_noneon/barebox-vexpress.config.diff | 2 +-
configs/platform-v7a_noneon/barebox.config | 5 ++++-
16 files changed, 40 insertions(+), 22 deletions(-)
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 90e7756dabae..875d935b1755 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -197,7 +197,9 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -928,6 +930,7 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index eeb39d3ffc0f..aa31220c8dab 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-767c9d2f029195d89d541b1de6347271
+a8029702e337f16bb6355beda6d149d7
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
# CONFIG_AM33XX_NET_BOOT is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index a9758bee288f..36925a447cfa 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -208,7 +208,9 @@ CONFIG_PBL_CONSOLE=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -937,6 +939,7 @@ CONFIG_IMAGE_SPARSE=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index e90f18cb58e0..913695684ecb 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-767c9d2f029195d89d541b1de6347271
+a8029702e337f16bb6355beda6d149d7
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
CONFIG_ARCH_AT91=y
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index f1308c66847c..b15528a71ae4 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-767c9d2f029195d89d541b1de6347271
+a8029702e337f16bb6355beda6d149d7
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
# CONFIG_ARCH_BCM283X is not set
@@ -210,9 +210,6 @@ CONFIG_NVMEM=y
# CONFIG_NVMEM_REBOOT_MODE is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
-CONFIG_PARTITION_DISK_EFI=y
-CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
-CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
# CONFIG_PBL_OPTEE is undefined
# CONFIG_PCI is not set
# CONFIG_PCI_ECAM_GENERIC is not set
@@ -222,7 +219,6 @@ CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
# CONFIG_PINCTRL_BCM283X is undefined
CONFIG_PINCTRL_IMX_IOMUX_V3=y
CONFIG_PNG=y
-CONFIG_PRINTF_UUID=y
CONFIG_PROMPT="barebox:"
CONFIG_PWM=y
CONFIG_PWM_IMX=y
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 57250e40b6b6..1789d9c8faa1 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -196,7 +196,9 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -917,6 +919,7 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 6f8705a94859..7dceb530ed66 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,4 +1,4 @@
-767c9d2f029195d89d541b1de6347271
+a8029702e337f16bb6355beda6d149d7
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_BOOTCHOOSER=y
CONFIG_CMD_BOOTCHOOSER=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index 034c89223848..f0c4045194df 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-767c9d2f029195d89d541b1de6347271
+a8029702e337f16bb6355beda6d149d7
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
# CONFIG_ARCH_BCM283X is not set
@@ -109,7 +109,6 @@ CONFIG_NVMEM=y
# CONFIG_NVMEM_REBOOT_MODE is not set
# CONFIG_NVMEM_RMEM is not set
# CONFIG_NVMEM_SNVS_LPGPR is not set
-CONFIG_PARTITION_DISK_EFI=y
# CONFIG_PARTITION_DISK_EFI_GPT_COMPARE is not set
# CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE is not set
CONFIG_PBL_CONSOLE=y
@@ -118,7 +117,6 @@ CONFIG_PBL_CONSOLE=y
CONFIG_PHY_STM32_USBPHYC=y
# CONFIG_PINCTRL_BCM283X is undefined
CONFIG_PINCTRL_STM32=y
-CONFIG_PRINTF_UUID=y
CONFIG_PROMPT="barebox:"
CONFIG_PWM=y
CONFIG_PWM_STM32=y
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 1024c9d5f2bf..0d3ab3bde546 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -174,7 +174,9 @@ CONFIG_PBL_CONSOLE=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -850,6 +852,7 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index 1fce564357f0..f47f7b66f9e2 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-767c9d2f029195d89d541b1de6347271
+a8029702e337f16bb6355beda6d149d7
# CONFIG_32BIT is undefined
# CONFIG_64BIT is undefined
CONFIG_AMBA_SP804=y
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index f4d9cd21b11c..b0b3d64c5a0e 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -195,7 +195,9 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -907,6 +909,7 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
# CONFIG_NLS is not set
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
index 600417a314df..c24b5d36b79d 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config
+++ b/configs/platform-v7a_noneon/barebox-at91.config
@@ -197,7 +197,9 @@ CONFIG_PBL_CONSOLE=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -966,6 +968,7 @@ CONFIG_IMAGE_SPARSE=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
index 9a5ff84cf648..e2cdc16d00ff 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config.diff
+++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-4843d0dbea5da5cc603015348ad891de
+71b0583d9737e188a32240ae7d29a558
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_IMX is undefined
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
index cf504a6c606c..09f112d397e1 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config
@@ -175,7 +175,9 @@ CONFIG_PBL_CONSOLE=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -864,6 +866,7 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
index 2215ceb876cc..36ab78e8ebc3 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
@@ -1,4 +1,4 @@
-4843d0dbea5da5cc603015348ad891de
+71b0583d9737e188a32240ae7d29a558
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
index 908bf1fe8d3f..9bbc3745d184 100644
--- a/configs/platform-v7a_noneon/barebox.config
+++ b/configs/platform-v7a_noneon/barebox.config
@@ -191,7 +191,9 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PARTITION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
-# CONFIG_PARTITION_DISK_EFI is not set
+CONFIG_PARTITION_DISK_EFI=y
+CONFIG_PARTITION_DISK_EFI_GPT_NO_FORCE=y
+CONFIG_PARTITION_DISK_EFI_GPT_COMPARE=y
CONFIG_ENV_HANDLING=y
CONFIG_DEFAULT_ENVIRONMENT=y
CONFIG_DEFAULT_COMPRESSION_NONE=y
@@ -916,6 +918,7 @@ CONFIG_LIBFDT=y
#
# end of Library gui routines
+CONFIG_PRINTF_UUID=y
CONFIG_NLS=y
# CONFIG_BLOBGEN is not set
CONFIG_ARCH_HAS_STACK_DUMP=y
--
2.39.2
^ permalink raw reply [flat|nested] 7+ messages in thread* [DistroKit] [PATCH v2 5/6] images: remove qemu size hack
2023-10-11 10:50 [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
` (2 preceding siblings ...)
2023-10-11 10:50 ` [DistroKit] [PATCH v2 4/6] v7a: barebox: enable GUID Partition Table support Roland Hieber
@ 2023-10-11 10:50 ` Roland Hieber
2023-10-11 10:50 ` [DistroKit] [PATCH v2 6/6] images: convert to GPT format Roland Hieber
2023-10-18 9:17 ` [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Robert Schwebel
5 siblings, 0 replies; 7+ messages in thread
From: Roland Hieber @ 2023-10-11 10:50 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
genimage knows about the 'size' option for images to fill the image to a
certain size, and since genimage v14 it supports the 'fill' option to
write all zeroes at the end of the image and not cut them off to
optimise the image size. Use this to blow up the images that are used
with qemu to the next power of two so qemu can work with them, and
remove our invisible-partition-at-the-end hack.
Since the first MiB (when using 1 MiB alignment) is occupied by the
partition table, and the first partition only starts at offset 1 MiB,
the data partition now no longer fits into the available space. Set it
to 'autoresize' so that genimage computes the size to fill the remaining
space in the image.
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
PATCH v2:
* use 'autoresize' for data partition instead of explicit size
PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-5-rhi@pengutronix.de
---
.../platform-mips/config/images/ar9331.config | 16 ++++------------
.../platform-mips/config/images/malta.config | 16 ++++------------
.../platform-mipsel/config/images/malta.config | 16 ++++------------
.../config/images/vexpress-nor.config | 10 +++-------
.../platform-v7a/config/images/vexpress.config | 17 ++++-------------
.../config/images/vexpress-nor.config | 10 +++-------
.../config/images/vexpress.config | 17 ++++-------------
7 files changed, 26 insertions(+), 76 deletions(-)
diff --git a/configs/platform-mips/config/images/ar9331.config b/configs/platform-mips/config/images/ar9331.config
index 07125bea4c88..16122eb26a22 100644
--- a/configs/platform-mips/config/images/ar9331.config
+++ b/configs/platform-mips/config/images/ar9331.config
@@ -1,7 +1,10 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 1G
hdimage {
align = 1M
disk-signature = 0x74823abf
+ fill = true
}
partition root-A {
image = root.ext2
@@ -10,18 +13,7 @@ image @IMAGE@ {
}
partition data {
partition-type = 0x83
- size = 512M
- }
- /* genimage does not write zeros at the end of an image to save space,
- * but the kernel in qemu will complain if the image file is smaller
- * than the partition sizes. work around this by adding an empty
- * partition at the end.
- */
- partition end {
- image = /dev/null
- size = 1M
- offset = 1025M
- in-partition-table = false
+ autoresize = true
}
}
diff --git a/configs/platform-mips/config/images/malta.config b/configs/platform-mips/config/images/malta.config
index 07125bea4c88..16122eb26a22 100644
--- a/configs/platform-mips/config/images/malta.config
+++ b/configs/platform-mips/config/images/malta.config
@@ -1,7 +1,10 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 1G
hdimage {
align = 1M
disk-signature = 0x74823abf
+ fill = true
}
partition root-A {
image = root.ext2
@@ -10,18 +13,7 @@ image @IMAGE@ {
}
partition data {
partition-type = 0x83
- size = 512M
- }
- /* genimage does not write zeros at the end of an image to save space,
- * but the kernel in qemu will complain if the image file is smaller
- * than the partition sizes. work around this by adding an empty
- * partition at the end.
- */
- partition end {
- image = /dev/null
- size = 1M
- offset = 1025M
- in-partition-table = false
+ autoresize = true
}
}
diff --git a/configs/platform-mipsel/config/images/malta.config b/configs/platform-mipsel/config/images/malta.config
index 07125bea4c88..16122eb26a22 100644
--- a/configs/platform-mipsel/config/images/malta.config
+++ b/configs/platform-mipsel/config/images/malta.config
@@ -1,7 +1,10 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 1G
hdimage {
align = 1M
disk-signature = 0x74823abf
+ fill = true
}
partition root-A {
image = root.ext2
@@ -10,18 +13,7 @@ image @IMAGE@ {
}
partition data {
partition-type = 0x83
- size = 512M
- }
- /* genimage does not write zeros at the end of an image to save space,
- * but the kernel in qemu will complain if the image file is smaller
- * than the partition sizes. work around this by adding an empty
- * partition at the end.
- */
- partition end {
- image = /dev/null
- size = 1M
- offset = 1025M
- in-partition-table = false
+ autoresize = true
}
}
diff --git a/configs/platform-v7a/config/images/vexpress-nor.config b/configs/platform-v7a/config/images/vexpress-nor.config
index cc7edd28f628..58bbbfca404a 100644
--- a/configs/platform-v7a/config/images/vexpress-nor.config
+++ b/configs/platform-v7a/config/images/vexpress-nor.config
@@ -1,6 +1,9 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 64M
hdimage {
partition-table-type = none
+ fill = true
}
partition barebox {
image = barebox-vexpress-ca9.img
@@ -19,13 +22,6 @@ image @IMAGE@ {
in-partition-table = false
size = 1M
}
- /* expand image size to 64 MiB; dummy size, results in 0 bytes length */
- partition end {
- image = /dev/null
- offset = 64M
- size = 1M
- in-partition-table = false
- }
}
/* vim: set tabstop=8 noexpandtab : */
diff --git a/configs/platform-v7a/config/images/vexpress.config b/configs/platform-v7a/config/images/vexpress.config
index 3aa64a4299ce..5c523ae1707d 100644
--- a/configs/platform-v7a/config/images/vexpress.config
+++ b/configs/platform-v7a/config/images/vexpress.config
@@ -1,7 +1,10 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 256M
hdimage {
align = 1M
disk-signature = 0x74823abf
+ fill = true
}
partition root-A {
image = root.ext2
@@ -15,19 +18,7 @@ image @IMAGE@ {
}
partition data {
partition-type = 0x83
- size = 63M
- }
- /* genimage does not write zeros at the end of an image to save space,
- * but the kernel in qemu will complain if the image file is smaller
- * than the partition sizes, and qemu will complain if the SD card size
- * is not a power of 2. work around this issues by adding an empty
- * partition at the end.
- */
- partition end {
- image = /dev/null
- size = 1M
- offset = 256M
- in-partition-table = false
+ autoresize = true
}
}
diff --git a/configs/platform-v7a_noneon/config/images/vexpress-nor.config b/configs/platform-v7a_noneon/config/images/vexpress-nor.config
index cc7edd28f628..58bbbfca404a 100644
--- a/configs/platform-v7a_noneon/config/images/vexpress-nor.config
+++ b/configs/platform-v7a_noneon/config/images/vexpress-nor.config
@@ -1,6 +1,9 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 64M
hdimage {
partition-table-type = none
+ fill = true
}
partition barebox {
image = barebox-vexpress-ca9.img
@@ -19,13 +22,6 @@ image @IMAGE@ {
in-partition-table = false
size = 1M
}
- /* expand image size to 64 MiB; dummy size, results in 0 bytes length */
- partition end {
- image = /dev/null
- offset = 64M
- size = 1M
- in-partition-table = false
- }
}
/* vim: set tabstop=8 noexpandtab : */
diff --git a/configs/platform-v7a_noneon/config/images/vexpress.config b/configs/platform-v7a_noneon/config/images/vexpress.config
index d51a58be2893..54c47a42c8bf 100644
--- a/configs/platform-v7a_noneon/config/images/vexpress.config
+++ b/configs/platform-v7a_noneon/config/images/vexpress.config
@@ -1,7 +1,10 @@
image @IMAGE@ {
+ /* Note: qemu will complain if the SD card size is not a power of two */
+ size = 256M
hdimage {
align = 1M
disk-signature = 0x74823abf
+ fill = true
}
partition root-A {
image = root.ext2
@@ -10,19 +13,7 @@ image @IMAGE@ {
}
partition data {
partition-type = 0x83
- size = 63M
- }
- /* genimage does not write zeros at the end of an image to save space,
- * but the kernel in qemu will complain if the image file is smaller
- * than the partition sizes, and qemu will complain if the SD card size
- * is not a power of 2. work around this issues by adding an empty
- * partition at the end.
- */
- partition end {
- image = /dev/null
- size = 1M
- offset = 256M
- in-partition-table = false
+ autoresize = true
}
}
--
2.39.2
^ permalink raw reply [flat|nested] 7+ messages in thread* [DistroKit] [PATCH v2 6/6] images: convert to GPT format
2023-10-11 10:50 [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
` (3 preceding siblings ...)
2023-10-11 10:50 ` [DistroKit] [PATCH v2 5/6] images: remove qemu size hack Roland Hieber
@ 2023-10-11 10:50 ` Roland Hieber
2023-10-18 9:17 ` [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Robert Schwebel
5 siblings, 0 replies; 7+ messages in thread
From: Roland Hieber @ 2023-10-11 10:50 UTC (permalink / raw)
To: distrokit; +Cc: Roland Hieber
The GUID Partition Table format has several advantages over the legacy
MBR format. Especially when we want to make use of systemd-repart
functionality later, the GPT format is a necessity. Therefore, migrate
all images to the GPT format.
For some platforms (Raspberry Pi, AM355x, AT91), we still need a legacy
MBR partition table so that the ROM code can find a bootable partition
(which contains our barebox image). For those cases, transform the image
into a hybrid format containing an MBR at offset 0, which contains the
VFAT boot partition for the ROM loader, and a protective GPT partition
of partition type 0xEE after it to claim the remaining space on the
storage medium for GPT purposes. Then a GPT header is added at the
default GPT offset of 0x200, which defines the boot partition as well as
the root partition, and which is read by Barebox and Linux to boot the
system.
For images that contain a raw barebox image at a fixed offset outside of
a GPT partition, make sure that the GPT does not conflict with the
barebox image, and write only the primary GPT header into the hole
specified by the barebox image (offset 440 to 1K), but move the GPT
partition array to an offset behind the barebox image. (genimage will
then also offset the following partitions accordingly.)
Remove any 'disk-signature' options, which are not compatible with GPT;
genimage will generate a random Disk UUID instead. Also remove any
'partition-type' options, and set the respective partition type GUIDs
specified by the Discoverable Partitions Specification [1], or let
genimage default to the 'linux-generic' partition type.
For the rpi1 image-hdimg, overwrite the upstream hd.config with a
hardcoded genimage config file since it is not possible to build a
hybrid MBR/GPT image with the image recipe from upstream PTXdist.
For the v7a image-hdimg, enable GPT support in the platformconfig menu,
and re-add the respective config lines from the upstream version of the
config file in order to make GPT work.
The images with fixed partition sizes for qemu need to stay below the
size specified in the 'size' option, so decrease the size of the last
partition further to make space for the secondary GPT header, which will
reside in the last block of the image.
Link: [1] https://uapi-group.org/specifications/specs/discoverable_partitions_specification/
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
PATCH v2:
* fix typo in log message
* use partition-type-uuids from Discoverable Partitions Specification
PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-6-rhi@pengutronix.de
---
.../platform-mips/config/images/ar9331.config | 5 ++---
configs/platform-mips/config/images/malta.config | 5 ++---
.../platform-mipsel/config/images/malta.config | 5 ++---
configs/platform-rpi1/config/images/hd.config | 16 ++++++++++++++++
configs/platform-rpi1/platformconfig | 4 ----
configs/platform-rpi1/platforms/image-hdimg.in | 11 +++++++++++
.../platform-v7a/config/images/at91-sd.config | 6 +++---
.../platform-v7a/config/images/beaglebone.config | 8 ++++----
configs/platform-v7a/config/images/gf.config | 6 +++---
configs/platform-v7a/config/images/hd.config | 4 ++--
.../platform-v7a/config/images/riotboard.config | 8 ++++----
configs/platform-v7a/config/images/rpi2.config | 8 ++++----
.../platform-v7a/config/images/sabrelite.config | 6 +++---
.../platform-v7a/config/images/udoo-neo.config | 6 +++---
.../platform-v7a/config/images/vexpress.config | 7 +++----
configs/platform-v7a/platformconfig | 2 +-
.../config/images/at91-sd.config | 6 +++---
.../config/images/vexpress.config | 5 ++---
.../config/images/espressobin.config | 4 ++--
configs/platform-v8a/config/images/rock3a.config | 5 ++---
20 files changed, 72 insertions(+), 55 deletions(-)
create mode 100644 configs/platform-rpi1/config/images/hd.config
create mode 100644 configs/platform-rpi1/platforms/image-hdimg.in
diff --git a/configs/platform-mips/config/images/ar9331.config b/configs/platform-mips/config/images/ar9331.config
index 16122eb26a22..f26627f84cc0 100644
--- a/configs/platform-mips/config/images/ar9331.config
+++ b/configs/platform-mips/config/images/ar9331.config
@@ -3,16 +3,15 @@ image @IMAGE@ {
size = 1G
hdimage {
align = 1M
- disk-signature = 0x74823abf
fill = true
+ partition-table-type = gpt
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = e9434544-6e2c-47cc-bae2-12d6deafb44c # root-mips
size = 512M
}
partition data {
- partition-type = 0x83
autoresize = true
}
}
diff --git a/configs/platform-mips/config/images/malta.config b/configs/platform-mips/config/images/malta.config
index 16122eb26a22..f26627f84cc0 100644
--- a/configs/platform-mips/config/images/malta.config
+++ b/configs/platform-mips/config/images/malta.config
@@ -3,16 +3,15 @@ image @IMAGE@ {
size = 1G
hdimage {
align = 1M
- disk-signature = 0x74823abf
fill = true
+ partition-table-type = gpt
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = e9434544-6e2c-47cc-bae2-12d6deafb44c # root-mips
size = 512M
}
partition data {
- partition-type = 0x83
autoresize = true
}
}
diff --git a/configs/platform-mipsel/config/images/malta.config b/configs/platform-mipsel/config/images/malta.config
index 16122eb26a22..c873c7e8b724 100644
--- a/configs/platform-mipsel/config/images/malta.config
+++ b/configs/platform-mipsel/config/images/malta.config
@@ -3,16 +3,15 @@ image @IMAGE@ {
size = 1G
hdimage {
align = 1M
- disk-signature = 0x74823abf
fill = true
+ partition-table-type = gpt
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 37c58c8a-d913-4156-a25f-48b1b64e07f0 # root-mips-le
size = 512M
}
partition data {
- partition-type = 0x83
autoresize = true
}
}
diff --git a/configs/platform-rpi1/config/images/hd.config b/configs/platform-rpi1/config/images/hd.config
new file mode 100644
index 000000000000..7b659a3130ad
--- /dev/null
+++ b/configs/platform-rpi1/config/images/hd.config
@@ -0,0 +1,16 @@
+image @IMAGE@ {
+ hdimage {
+ align = 1M
+ partition-table-type = hybrid
+ }
+ partition boot-vfat {
+ image = boot.vfat
+ partition-type-uuid = F
+ partition-type = 0xc
+ bootable = true
+ }
+ partition root {
+ image = root.ext2
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
+ }
+}
diff --git a/configs/platform-rpi1/platformconfig b/configs/platform-rpi1/platformconfig
index 67e5f161cd78..8fd1b1983015 100644
--- a/configs/platform-rpi1/platformconfig
+++ b/configs/platform-rpi1/platformconfig
@@ -230,10 +230,6 @@ PTXCONF_IMAGE_BOOT_VFAT=y
PTXCONF_IMAGE_BOOT_VFAT_GPU_MEM=16
# PTXCONF_IMAGE_HD_VDI is not set
PTXCONF_IMAGE_HDIMG=y
-# PTXCONF_IMAGE_HDIMG_GPT is not set
-# PTXCONF_IMAGE_HDIMG_NONE is not set
-# PTXCONF_IMAGE_HDIMG_BAREBOX is not set
-PTXCONF_IMAGE_HDIMG_VFAT=y
PTXCONF_IMAGE_KERNEL=y
#
diff --git a/configs/platform-rpi1/platforms/image-hdimg.in b/configs/platform-rpi1/platforms/image-hdimg.in
new file mode 100644
index 000000000000..052e7e71df38
--- /dev/null
+++ b/configs/platform-rpi1/platforms/image-hdimg.in
@@ -0,0 +1,11 @@
+## SECTION=image
+
+config IMAGE_HDIMG
+ bool
+ select HOST_GENIMAGE
+ select IMAGE_BOOT_VFAT
+ select IMAGE_ROOT_EXT
+ prompt "Generate images/hd.img"
+ help
+ Build a harddisk root image. The image will contain one partition
+ containing the root.ext2 and a corresponding partition table.
diff --git a/configs/platform-v7a/config/images/at91-sd.config b/configs/platform-v7a/config/images/at91-sd.config
index 641db071224f..a892868cd7b7 100644
--- a/configs/platform-v7a/config/images/at91-sd.config
+++ b/configs/platform-v7a/config/images/at91-sd.config
@@ -9,19 +9,19 @@ image @IMAGE@-boot.vfat {
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0x67823abf
+ partition-table-type = hybrid
}
partition boot {
image = @IMAGE@-boot.vfat
partition-type = 0xc
+ partition-type-uuid = F
bootable = true
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/beaglebone.config b/configs/platform-v7a/config/images/beaglebone.config
index 07d251bfbe69..7509f501ec86 100644
--- a/configs/platform-v7a/config/images/beaglebone.config
+++ b/configs/platform-v7a/config/images/beaglebone.config
@@ -9,23 +9,23 @@ image beaglebone-boot.vfat {
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0xabe26147
+ partition-table-type = hybrid
}
partition boot {
image = beaglebone-boot.vfat
partition-type = 0xc
+ partition-type-uuid = F
bootable = true
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition root-B {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/gf.config b/configs/platform-v7a/config/images/gf.config
index fbaddf15f527..6ec1d90db659 100644
--- a/configs/platform-v7a/config/images/gf.config
+++ b/configs/platform-v7a/config/images/gf.config
@@ -9,19 +9,19 @@ image gf-boot.vfat {
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0x74823abf
+ partition-table-type = hybrid
}
partition boot {
image = gf-boot.vfat
partition-type = 0xc
+ partition-type-uuid = F
bootable = true
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/hd.config b/configs/platform-v7a/config/images/hd.config
index 03cf37a0dbcf..dba48ca106ae 100644
--- a/configs/platform-v7a/config/images/hd.config
+++ b/configs/platform-v7a/config/images/hd.config
@@ -4,11 +4,11 @@
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0xdfb978e3
+ partition-table-type = "@PARTITION_TABLE_TYPE@"
}
@BOOTLOADER_PARTITIONS@
partition root {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
}
diff --git a/configs/platform-v7a/config/images/riotboard.config b/configs/platform-v7a/config/images/riotboard.config
index f311fd5e41b0..8ce12a07c71c 100644
--- a/configs/platform-v7a/config/images/riotboard.config
+++ b/configs/platform-v7a/config/images/riotboard.config
@@ -1,7 +1,8 @@
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0x67bac764
+ partition-table-type = gpt
+ gpt-location = 2M
}
partition barebox {
@@ -13,16 +14,15 @@ image @IMAGE@ {
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition root-B {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/rpi2.config b/configs/platform-v7a/config/images/rpi2.config
index eebf7052713f..71baae3bb8be 100644
--- a/configs/platform-v7a/config/images/rpi2.config
+++ b/configs/platform-v7a/config/images/rpi2.config
@@ -10,24 +10,24 @@ image rpi2-boot.vfat {
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0xbedf7893
+ partition-table-type = hybrid
}
partition boot {
offset = 4M
image = rpi2-boot.vfat
partition-type = 0xc
+ partition-type-uuid = F
bootable = true
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition root-B {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/sabrelite.config b/configs/platform-v7a/config/images/sabrelite.config
index 29e6b5f5a44a..2c7109c5c310 100644
--- a/configs/platform-v7a/config/images/sabrelite.config
+++ b/configs/platform-v7a/config/images/sabrelite.config
@@ -1,7 +1,8 @@
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0x67bac764
+ partition-table-type = gpt
+ gpt-location = 2M
}
partition barebox {
@@ -13,10 +14,9 @@ image @IMAGE@ {
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/udoo-neo.config b/configs/platform-v7a/config/images/udoo-neo.config
index da677757804d..f801b5524baf 100644
--- a/configs/platform-v7a/config/images/udoo-neo.config
+++ b/configs/platform-v7a/config/images/udoo-neo.config
@@ -1,7 +1,8 @@
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0x374ac764
+ partition-table-type = gpt
+ gpt-location = 2M
}
partition barebox {
@@ -13,10 +14,9 @@ image @IMAGE@ {
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a/config/images/vexpress.config b/configs/platform-v7a/config/images/vexpress.config
index 5c523ae1707d..87eaedfe8b82 100644
--- a/configs/platform-v7a/config/images/vexpress.config
+++ b/configs/platform-v7a/config/images/vexpress.config
@@ -3,21 +3,20 @@ image @IMAGE@ {
size = 256M
hdimage {
align = 1M
- disk-signature = 0x74823abf
fill = true
+ partition-table-type = gpt
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
size = 96M
}
partition root-B {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
size = 96M
}
partition data {
- partition-type = 0x83
autoresize = true
}
}
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 1e83fb3620cd..63e98e7ff4af 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -242,7 +242,7 @@ PTXCONF_IMAGE_BEAGLEBONE=y
PTXCONF_IMAGE_GF=y
# PTXCONF_IMAGE_HD_VDI is not set
PTXCONF_IMAGE_HDIMG=y
-# PTXCONF_IMAGE_HDIMG_GPT is not set
+PTXCONF_IMAGE_HDIMG_GPT=y
PTXCONF_IMAGE_HDIMG_NONE=y
# PTXCONF_IMAGE_HDIMG_BAREBOX is not set
# PTXCONF_IMAGE_HDIMG_VFAT is not set
diff --git a/configs/platform-v7a_noneon/config/images/at91-sd.config b/configs/platform-v7a_noneon/config/images/at91-sd.config
index caecd247065a..9bf369ec9c2b 100644
--- a/configs/platform-v7a_noneon/config/images/at91-sd.config
+++ b/configs/platform-v7a_noneon/config/images/at91-sd.config
@@ -9,19 +9,19 @@ image @IMAGE@-boot.vfat {
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0x67823abf
+ partition-table-type = hybrid
}
partition boot {
image = @IMAGE@-boot.vfat
partition-type = 0xc
+ partition-type-uuid = F
bootable = true
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v7a_noneon/config/images/vexpress.config b/configs/platform-v7a_noneon/config/images/vexpress.config
index 54c47a42c8bf..0712ad82ce96 100644
--- a/configs/platform-v7a_noneon/config/images/vexpress.config
+++ b/configs/platform-v7a_noneon/config/images/vexpress.config
@@ -3,16 +3,15 @@ image @IMAGE@ {
size = 256M
hdimage {
align = 1M
- disk-signature = 0x74823abf
fill = true
+ partition-table-type = gpt
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
size = 192M
}
partition data {
- partition-type = 0x83
autoresize = true
}
}
diff --git a/configs/platform-v8a/config/images/espressobin.config b/configs/platform-v8a/config/images/espressobin.config
index c4ab201691a9..188bb9ae4d9e 100644
--- a/configs/platform-v8a/config/images/espressobin.config
+++ b/configs/platform-v8a/config/images/espressobin.config
@@ -1,14 +1,14 @@
image @IMAGE@ {
hdimage {
align = 1M
+ partition-table-type = gpt
}
partition root-A {
image = root.ext2
- partition-type = 0x83
+ partition-type-uuid = 69dad710-2ce4-4e3c-b16c-21a1d49abed3 # root-arm
size = 512M
}
partition data {
- partition-type = 0x83
size = 512M
}
}
diff --git a/configs/platform-v8a/config/images/rock3a.config b/configs/platform-v8a/config/images/rock3a.config
index 522d82cdc9c9..d6d5ada84426 100644
--- a/configs/platform-v8a/config/images/rock3a.config
+++ b/configs/platform-v8a/config/images/rock3a.config
@@ -1,7 +1,7 @@
image @IMAGE@ {
hdimage {
align = 1M
- disk-signature = 0xf5feaddc
+ partition-table-type = gpt
}
partition boot1 {
offset = 32k
@@ -24,10 +24,9 @@ image @IMAGE@ {
partition root-A {
offset = 5M
image = "root.ext2"
- partition-type = 0x83
+ partition-type-uuid = b921b045-1df0-41c3-af44-4c6f280d3fae # root-arm64
}
partition data {
- partition-type = 0x83
size = 512M
}
}
--
2.39.2
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt'
2023-10-11 10:50 [DistroKit] [PATCH v2 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
` (4 preceding siblings ...)
2023-10-11 10:50 ` [DistroKit] [PATCH v2 6/6] images: convert to GPT format Roland Hieber
@ 2023-10-18 9:17 ` Robert Schwebel
5 siblings, 0 replies; 7+ messages in thread
From: Robert Schwebel @ 2023-10-18 9:17 UTC (permalink / raw)
To: Roland Hieber; +Cc: distrokit
Hi Roland,
the series doesn't apply any more, could you respin against next?
On Wed, Oct 11, 2023 at 12:50:33PM +0200, Roland Hieber wrote:
> The 'gpt' option in genimage has been deprecated in favour of
> 'partition-table-type = gpt'.
>
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
> PATCH v2: no change
>
> PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-1-rhi@pengutronix.de
> ---
> configs/platform-v7a/config/images/stm32mp.config | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/configs/platform-v7a/config/images/stm32mp.config b/configs/platform-v7a/config/images/stm32mp.config
> index 908ed44ce78c..805c50ded520 100644
> --- a/configs/platform-v7a/config/images/stm32mp.config
> +++ b/configs/platform-v7a/config/images/stm32mp.config
> @@ -1,7 +1,7 @@
> image @IMAGE@ {
> hdimage {
> align = 1M
> - gpt = true
> + partition-table-type = gpt
> gpt-no-backup = true
> }
> partition fsbl1 {
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
^ permalink raw reply [flat|nested] 7+ messages in thread