From: "Leonard Göhrs" <l.goehrs@pengutronix.de>
To: distrokit@pengutronix.de
Cc: "Leonard Göhrs" <l.goehrs@pengutronix.de>
Subject: [DistroKit] [PATCH v1 1/5] tf-a: add patch to auto-detect the correct UART on i.MX8M
Date: Thu, 11 Jan 2024 16:01:13 +0100 [thread overview]
Message-ID: <20240111150117.3678555-2-l.goehrs@pengutronix.de> (raw)
In-Reply-To: <20240111150117.3678555-1-l.goehrs@pengutronix.de>
This helps us on the TQ MBa8MPxL i.MX8MP development board,
that uses a different UART for debug output than the EVKs we
currently support.
Other i.MX8M boards should not be affected by the
IMX_BOOT_UART_BASE=0 configuration option because the automatic
selection will choose the correct UART.
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
---
configs/platform-v8a/platformconfig | 2 +-
...t-console-base-address-during-runtim.patch | 254 ++++++++++++++++++
...MX_BOOT_UART_BASE-autodetection-opti.patch | 133 +++++++++
...mers-pengutronix-distrokit-20240111.patch} | 10 +-
patches/tf-a-v2.8/series | 13 +-
5 files changed, 402 insertions(+), 10 deletions(-)
create mode 100644 patches/tf-a-v2.8/0201-feat-imx8m-detect-console-base-address-during-runtim.patch
create mode 100644 patches/tf-a-v2.8/0202-fix-imx8m-make-IMX_BOOT_UART_BASE-autodetection-opti.patch
rename patches/tf-a-v2.8/{0201-Release-2.8-customers-pengutronix-distrokit-20230210.patch => 0301-Release-2.8-customers-pengutronix-distrokit-20240111.patch} (76%)
diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
index b71b361..6925dac 100644
--- a/configs/platform-v8a/platformconfig
+++ b/configs/platform-v8a/platformconfig
@@ -216,7 +216,7 @@ PTXCONF_TF_A_ARM_ARCH_MAJOR_8=y
PTXCONF_TF_A_ARM_ARCH_MAJOR=8
PTXCONF_TF_A_PLATFORMS="imx8mq imx8mm imx8mn imx8mp"
PTXCONF_TF_A_ARM_ARCH_MINOR=0
-PTXCONF_TF_A_EXTRA_ARGS=""
+PTXCONF_TF_A_EXTRA_ARGS="IMX_BOOT_UART_BASE=0"
PTXCONF_TF_A_ARTIFACTS="bl31.bin"
#
diff --git a/patches/tf-a-v2.8/0201-feat-imx8m-detect-console-base-address-during-runtim.patch b/patches/tf-a-v2.8/0201-feat-imx8m-detect-console-base-address-during-runtim.patch
new file mode 100644
index 0000000..09c4d79
--- /dev/null
+++ b/patches/tf-a-v2.8/0201-feat-imx8m-detect-console-base-address-during-runtim.patch
@@ -0,0 +1,254 @@
+From: Marco Felsch <m.felsch@pengutronix.de>
+Date: Mon, 24 Jul 2023 15:05:58 +0200
+Subject: [PATCH] feat(imx8m): detect console base address during runtime
+
+Provide a helper to detect the enabled UART device during runtime. This
+lower the integration effort and make it more straight forward for
+'simple' use-cases with a single UART enabled. If multiple UARTs are
+enabled the first enabled is returned.
+
+The auto-detection is enabled by setting IMX_BOOT_UART_BASE=0 to keep
+the backward compatibility. For more advanced use-cases (multiple UARTs
+are enabled) the user still has to provide the correct base address.
+
+Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
+Change-Id: I300a167e1a10f9aa991c8d1c3efe2c6b23f56c47
+---
+ plat/imx/imx8m/imx8m_ccm.c | 58 +++++++++++++++++++++++++++++++
+ plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c | 11 +++++-
+ plat/imx/imx8m/imx8mm/platform.mk | 1 +
+ plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c | 11 +++++-
+ plat/imx/imx8m/imx8mn/platform.mk | 1 +
+ plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c | 11 +++++-
+ plat/imx/imx8m/imx8mp/platform.mk | 1 +
+ plat/imx/imx8m/include/imx8m_ccm.h | 12 +++++++
+ 8 files changed, 103 insertions(+), 3 deletions(-)
+ create mode 100644 plat/imx/imx8m/imx8m_ccm.c
+ create mode 100644 plat/imx/imx8m/include/imx8m_ccm.h
+
+diff --git a/plat/imx/imx8m/imx8m_ccm.c b/plat/imx/imx8m/imx8m_ccm.c
+new file mode 100644
+index 000000000000..10a00c990031
+--- /dev/null
++++ b/plat/imx/imx8m/imx8m_ccm.c
+@@ -0,0 +1,58 @@
++/*
++ * Copyright (c) 2023, Pengutronix. All rights reserved.
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#include <lib/mmio.h>
++#include <platform_def.h>
++
++#define UCR1 0x80
++#define UCR1_UARTEN BIT(0)
++#define DOMAIN0_RUNNING(d) (((d) & 0x3) != 0)
++
++static struct imx_uart {
++ unsigned int ccm_reg;
++ unsigned int uart_base;
++} imx8m_uart_info[] = {
++ { /* UART 1 */
++ .ccm_reg = 0x4490,
++ .uart_base = 0x30860000,
++ }, { /* UART 2 */
++ .ccm_reg = 0x44a0,
++ .uart_base = 0x30890000,
++ }, { /* UART 3 */
++ .ccm_reg = 0x44b0,
++ .uart_base = 0x30880000,
++ }, { /* UART 4 */
++ .ccm_reg = 0x44c0,
++ .uart_base = 0x30a60000,
++ }
++};
++
++unsigned int imx8m_uart_get_base(void)
++{
++ unsigned int i;
++
++ for (i = 0; i < ARRAY_SIZE(imx8m_uart_info); i++) {
++ uint32_t val;
++
++ /*
++ * At least check that the clock-gate is ungated before we
++ * access the UART register.
++ */
++ val = mmio_read_32(IMX_CCM_BASE + imx8m_uart_info[i].ccm_reg);
++ if (DOMAIN0_RUNNING(val)) {
++ val = mmio_read_32(imx8m_uart_info[i].uart_base + UCR1);
++ if (val & UCR1_UARTEN) {
++ return imx8m_uart_info[i].uart_base;
++ }
++ }
++ }
++
++ /*
++ * We should return an error and inform the user but we can't do it
++ * this early.
++ */
++ return 0;
++}
+diff --git a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
+index 67bfd3651dfe..8e6636147438 100644
+--- a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
++++ b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
+@@ -27,6 +27,7 @@
+ #include <imx_uart.h>
+ #include <imx_rdc.h>
+ #include <imx8m_caam.h>
++#include <imx8m_ccm.h>
+ #include <imx8m_csu.h>
+ #include <plat_imx8.h>
+
+@@ -130,6 +131,7 @@ void bl31_tzc380_setup(void)
+ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+ {
++ unsigned int console_base = 0U;
+ static console_t console;
+ int i;
+
+@@ -144,7 +146,14 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+
+ imx_csu_init(csu_cfg);
+
+- console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
++#if IMX_BOOT_UART_BASE
++ console_base = IMX_BOOT_UART_BASE;
++#endif
++ if (console_base == 0U) {
++ console_base = imx8m_uart_get_base();
++ }
++
++ console_imx_uart_register(console_base, IMX_BOOT_UART_CLK_IN_HZ,
+ IMX_CONSOLE_BAUDRATE, &console);
+ /* This console is only used for boot stage */
+ console_set_scope(&console, CONSOLE_FLAG_BOOT);
+diff --git a/plat/imx/imx8m/imx8mm/platform.mk b/plat/imx/imx8m/imx8mm/platform.mk
+index 7a42554f5739..22791fda4c2c 100644
+--- a/plat/imx/imx8m/imx8mm/platform.mk
++++ b/plat/imx/imx8m/imx8mm/platform.mk
+@@ -37,6 +37,7 @@ BL31_SOURCES += plat/imx/common/imx8_helpers.S \
+ plat/imx/imx8m/imx_rdc.c \
+ plat/imx/imx8m/imx8m_csu.c \
+ plat/imx/imx8m/imx8m_caam.c \
++ plat/imx/imx8m/imx8m_ccm.c \
+ plat/imx/imx8m/imx8m_psci_common.c \
+ plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c \
+ plat/imx/imx8m/imx8mm/imx8mm_psci.c \
+diff --git a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
+index eff198dd741c..aeb1cbf2945f 100644
+--- a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
++++ b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
+@@ -25,6 +25,7 @@
+ #include <imx_uart.h>
+ #include <imx_rdc.h>
+ #include <imx8m_caam.h>
++#include <imx8m_ccm.h>
+ #include <imx8m_csu.h>
+ #include <platform_def.h>
+ #include <plat_imx8.h>
+@@ -121,6 +122,7 @@ static void bl31_tzc380_setup(void)
+ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+ {
++ unsigned int console_base = 0U;
+ static console_t console;
+ unsigned int val;
+ int i;
+@@ -141,7 +143,14 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);
+ mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, val | 0x3DFF0000);
+
+- console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
++#if IMX_BOOT_UART_BASE
++ console_base = IMX_BOOT_UART_BASE;
++#endif
++ if (console_base == 0U) {
++ console_base = imx8m_uart_get_base();
++ }
++
++ console_imx_uart_register(console_base, IMX_BOOT_UART_CLK_IN_HZ,
+ IMX_CONSOLE_BAUDRATE, &console);
+ /* This console is only used for boot stage */
+ console_set_scope(&console, CONSOLE_FLAG_BOOT);
+diff --git a/plat/imx/imx8m/imx8mn/platform.mk b/plat/imx/imx8m/imx8mn/platform.mk
+index 1c0ad4f3bc23..46516104f16d 100644
+--- a/plat/imx/imx8m/imx8mn/platform.mk
++++ b/plat/imx/imx8m/imx8mn/platform.mk
+@@ -31,6 +31,7 @@ BL31_SOURCES += plat/imx/common/imx8_helpers.S \
+ plat/imx/imx8m/imx_aipstz.c \
+ plat/imx/imx8m/imx_rdc.c \
+ plat/imx/imx8m/imx8m_caam.c \
++ plat/imx/imx8m/imx8m_ccm.c \
+ plat/imx/imx8m/imx8m_csu.c \
+ plat/imx/imx8m/imx8m_psci_common.c \
+ plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c \
+diff --git a/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c b/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
+index 4c31fa28dab7..e25668b879b3 100644
+--- a/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
++++ b/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
+@@ -25,6 +25,7 @@
+ #include <imx_uart.h>
+ #include <imx_rdc.h>
+ #include <imx8m_caam.h>
++#include <imx8m_ccm.h>
+ #include <imx8m_csu.h>
+ #include <platform_def.h>
+ #include <plat_imx8.h>
+@@ -117,6 +118,7 @@ static void bl31_tzc380_setup(void)
+ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+ {
++ unsigned int console_base = 0U;
+ static console_t console;
+ unsigned int val;
+ unsigned int i;
+@@ -137,7 +139,14 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);
+ mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, val | 0x3DFF0000);
+
+- console_imx_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
++#if IMX_BOOT_UART_BASE
++ console_base = IMX_BOOT_UART_BASE;
++#endif
++ if (console_base == 0U) {
++ console_base = imx8m_uart_get_base();
++ }
++
++ console_imx_uart_register(console_base, IMX_BOOT_UART_CLK_IN_HZ,
+ IMX_CONSOLE_BAUDRATE, &console);
+ /* This console is only used for boot stage */
+ console_set_scope(&console, CONSOLE_FLAG_BOOT);
+diff --git a/plat/imx/imx8m/imx8mp/platform.mk b/plat/imx/imx8m/imx8mp/platform.mk
+index 5414c0a5732d..cdb504de0f3d 100644
+--- a/plat/imx/imx8m/imx8mp/platform.mk
++++ b/plat/imx/imx8m/imx8mp/platform.mk
+@@ -32,6 +32,7 @@ BL31_SOURCES += plat/imx/common/imx8_helpers.S \
+ plat/imx/imx8m/imx_aipstz.c \
+ plat/imx/imx8m/imx_rdc.c \
+ plat/imx/imx8m/imx8m_caam.c \
++ plat/imx/imx8m/imx8m_ccm.c \
+ plat/imx/imx8m/imx8m_csu.c \
+ plat/imx/imx8m/imx8m_psci_common.c \
+ plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c \
+diff --git a/plat/imx/imx8m/include/imx8m_ccm.h b/plat/imx/imx8m/include/imx8m_ccm.h
+new file mode 100644
+index 000000000000..acbd135cb314
+--- /dev/null
++++ b/plat/imx/imx8m/include/imx8m_ccm.h
+@@ -0,0 +1,12 @@
++/*
++ * Copyright (c) 2023, Pengutronix. All rights reserved.
++ *
++ * SPDX-License-Identifier: BSD-3-Clause
++ */
++
++#ifndef IMX8M_CCM_H
++#define IMX8M_CCM_H
++
++unsigned int imx8m_uart_get_base(void);
++
++#endif /* IMX8M_CCM_H */
diff --git a/patches/tf-a-v2.8/0202-fix-imx8m-make-IMX_BOOT_UART_BASE-autodetection-opti.patch b/patches/tf-a-v2.8/0202-fix-imx8m-make-IMX_BOOT_UART_BASE-autodetection-opti.patch
new file mode 100644
index 0000000..88d9921
--- /dev/null
+++ b/patches/tf-a-v2.8/0202-fix-imx8m-make-IMX_BOOT_UART_BASE-autodetection-opti.patch
@@ -0,0 +1,133 @@
+From: Marco Felsch <m.felsch@pengutronix.de>
+Date: Wed, 2 Aug 2023 08:11:35 +0200
+Subject: [PATCH] fix(imx8m): make IMX_BOOT_UART_BASE autodetection option more
+ obvious
+
+Switch from IMX_BOOT_UART_BASE=0 to IMX_BOOT_UART_BASE=auto to make it
+more obvious that the detection is based on the runtime autodetection.
+
+In addition this moves the evaluation of IMX_BOOT_UART_BASE into the
+makefile which removes the ugly conditional compilation as well.
+
+Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
+Change-Id: I92c13607bf81c6267f4b6aee829d74902b7f72d2
+---
+ plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c | 5 +----
+ plat/imx/imx8m/imx8mm/platform.mk | 3 +++
+ plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c | 5 +----
+ plat/imx/imx8m/imx8mn/platform.mk | 3 +++
+ plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c | 5 +----
+ plat/imx/imx8m/imx8mp/platform.mk | 3 +++
+ 6 files changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
+index 8e6636147438..c8a3adf8f333 100644
+--- a/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
++++ b/plat/imx/imx8m/imx8mm/imx8mm_bl31_setup.c
+@@ -131,7 +131,7 @@ void bl31_tzc380_setup(void)
+ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+ {
+- unsigned int console_base = 0U;
++ unsigned int console_base = IMX_BOOT_UART_BASE;
+ static console_t console;
+ int i;
+
+@@ -146,9 +146,6 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+
+ imx_csu_init(csu_cfg);
+
+-#if IMX_BOOT_UART_BASE
+- console_base = IMX_BOOT_UART_BASE;
+-#endif
+ if (console_base == 0U) {
+ console_base = imx8m_uart_get_base();
+ }
+diff --git a/plat/imx/imx8m/imx8mm/platform.mk b/plat/imx/imx8m/imx8mm/platform.mk
+index 22791fda4c2c..1b4a1f2f37c7 100644
+--- a/plat/imx/imx8m/imx8mm/platform.mk
++++ b/plat/imx/imx8m/imx8mm/platform.mk
+@@ -159,6 +159,9 @@ BL32_SIZE ?= 0x2000000
+ $(eval $(call add_define,BL32_SIZE))
+
+ IMX_BOOT_UART_BASE ?= 0x30890000
++ifeq (${IMX_BOOT_UART_BASE},auto)
++ override IMX_BOOT_UART_BASE := 0
++endif
+ $(eval $(call add_define,IMX_BOOT_UART_BASE))
+
+ EL3_EXCEPTION_HANDLING := $(SDEI_SUPPORT)
+diff --git a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
+index aeb1cbf2945f..147249ee5e56 100644
+--- a/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
++++ b/plat/imx/imx8m/imx8mn/imx8mn_bl31_setup.c
+@@ -122,7 +122,7 @@ static void bl31_tzc380_setup(void)
+ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+ {
+- unsigned int console_base = 0U;
++ unsigned int console_base = IMX_BOOT_UART_BASE;
+ static console_t console;
+ unsigned int val;
+ int i;
+@@ -143,9 +143,6 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);
+ mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, val | 0x3DFF0000);
+
+-#if IMX_BOOT_UART_BASE
+- console_base = IMX_BOOT_UART_BASE;
+-#endif
+ if (console_base == 0U) {
+ console_base = imx8m_uart_get_base();
+ }
+diff --git a/plat/imx/imx8m/imx8mn/platform.mk b/plat/imx/imx8m/imx8mn/platform.mk
+index 46516104f16d..a6b43f213506 100644
+--- a/plat/imx/imx8m/imx8mn/platform.mk
++++ b/plat/imx/imx8m/imx8mn/platform.mk
+@@ -65,6 +65,9 @@ BL32_SIZE ?= 0x2000000
+ $(eval $(call add_define,BL32_SIZE))
+
+ IMX_BOOT_UART_BASE ?= 0x30890000
++ifeq (${IMX_BOOT_UART_BASE},auto)
++ override IMX_BOOT_UART_BASE := 0
++endif
+ $(eval $(call add_define,IMX_BOOT_UART_BASE))
+
+ EL3_EXCEPTION_HANDLING := $(SDEI_SUPPORT)
+diff --git a/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c b/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
+index e25668b879b3..b0a41c741c17 100644
+--- a/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
++++ b/plat/imx/imx8m/imx8mp/imx8mp_bl31_setup.c
+@@ -118,7 +118,7 @@ static void bl31_tzc380_setup(void)
+ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ u_register_t arg2, u_register_t arg3)
+ {
+- unsigned int console_base = 0U;
++ unsigned int console_base = IMX_BOOT_UART_BASE;
+ static console_t console;
+ unsigned int val;
+ unsigned int i;
+@@ -139,9 +139,6 @@ void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+ val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x2c);
+ mmio_write_32(IMX_IOMUX_GPR_BASE + 0x2c, val | 0x3DFF0000);
+
+-#if IMX_BOOT_UART_BASE
+- console_base = IMX_BOOT_UART_BASE;
+-#endif
+ if (console_base == 0U) {
+ console_base = imx8m_uart_get_base();
+ }
+diff --git a/plat/imx/imx8m/imx8mp/platform.mk b/plat/imx/imx8m/imx8mp/platform.mk
+index cdb504de0f3d..0169144f4a1a 100644
+--- a/plat/imx/imx8m/imx8mp/platform.mk
++++ b/plat/imx/imx8m/imx8mp/platform.mk
+@@ -156,6 +156,9 @@ BL32_SIZE ?= 0x2000000
+ $(eval $(call add_define,BL32_SIZE))
+
+ IMX_BOOT_UART_BASE ?= 0x30890000
++ifeq (${IMX_BOOT_UART_BASE},auto)
++ override IMX_BOOT_UART_BASE := 0
++endif
+ $(eval $(call add_define,IMX_BOOT_UART_BASE))
+
+ EL3_EXCEPTION_HANDLING := $(SDEI_SUPPORT)
diff --git a/patches/tf-a-v2.8/0201-Release-2.8-customers-pengutronix-distrokit-20230210.patch b/patches/tf-a-v2.8/0301-Release-2.8-customers-pengutronix-distrokit-20240111.patch
similarity index 76%
rename from patches/tf-a-v2.8/0201-Release-2.8-customers-pengutronix-distrokit-20230210.patch
rename to patches/tf-a-v2.8/0301-Release-2.8-customers-pengutronix-distrokit-20240111.patch
index f230656..d8e0796 100644
--- a/patches/tf-a-v2.8/0201-Release-2.8-customers-pengutronix-distrokit-20230210.patch
+++ b/patches/tf-a-v2.8/0301-Release-2.8-customers-pengutronix-distrokit-20240111.patch
@@ -1,13 +1,13 @@
-From: Marco Felsch <m.felsch@pengutronix.de>
-Date: Fri, 10 Feb 2023 12:51:49 +0100
-Subject: [PATCH] Release 2.8/customers/pengutronix/distrokit/20230210-1
+From: =?UTF-8?q?Leonard=20G=C3=B6hrs?= <l.goehrs@pengutronix.de>
+Date: Thu, 11 Jan 2024 07:41:25 +0100
+Subject: [PATCH] Release 2.8/customers/pengutronix/distrokit/20240111-1
---
Makefile | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Makefile b/Makefile
-index 1bfff716485a..cf80e5cac8f3 100644
+index 1bfff716485a..e796cff20e4a 100644
--- a/Makefile
+++ b/Makefile
@@ -327,7 +327,7 @@ endif
@@ -15,7 +15,7 @@ index 1bfff716485a..cf80e5cac8f3 100644
BUILD_STRING := $(shell git describe --always --dirty --tags 2> /dev/null)
endif
-VERSION_STRING := v${VERSION}(${BUILD_TYPE}):${BUILD_STRING}
-+VERSION_STRING := v${VERSION}(${BUILD_TYPE}):${BUILD_STRING}-20230210-1
++VERSION_STRING := v${VERSION}(${BUILD_TYPE}):${BUILD_STRING}-20240111-1
ifeq (${AARCH32_INSTRUCTION_SET},A32)
TF_CFLAGS_aarch32 += -marm
diff --git a/patches/tf-a-v2.8/series b/patches/tf-a-v2.8/series
index a29319d..ba47166 100644
--- a/patches/tf-a-v2.8/series
+++ b/patches/tf-a-v2.8/series
@@ -1,6 +1,6 @@
# umpf-base: v2.8
# umpf-name: 2.8/customers/pengutronix/distrokit
-# umpf-version: 2.8/customers/pengutronix/distrokit/20230210-1
+# umpf-version: 2.8/customers/pengutronix/distrokit/20240111-1
# umpf-topic: v2.8/topic/fix-build-warnings
# umpf-hashinfo: 4730b4b80206cf2fc27787f43cefd3169a6f8a2f
# umpf-topic-range: 9881bb93a3bc0a3ea37e9f093e09ab4b360a9e48..da1b5e74dc7c2b3e7a2d9a1adb7e23beeba079e3
@@ -16,7 +16,12 @@
0105-refactor-imx8mq-introduce-BL31_SIZE.patch
0106-feat-imx8mq-add-BL31-PIE-support.patch
0107-feat-imx8mq-add-support-for-gcc-12.x.patch
-# umpf-release: 2.8/customers/pengutronix/distrokit/20230210-1
-# umpf-topic-range: be7bcbebf5b22958e8b88564ca0865b4591263e7..827865ee983d0c7cd4bb99d85d46f972386e5ea9
-0201-Release-2.8-customers-pengutronix-distrokit-20230210.patch
+# umpf-topic: v2.8/topic/uart-runtime-detection
+# umpf-hashinfo: 6779c0c04fddf637567b2a3a2fef3dbea7b192b5
+# umpf-topic-range: be7bcbebf5b22958e8b88564ca0865b4591263e7..844a61329bf4e262a18da834cf38d7ae483b6923
+0201-feat-imx8m-detect-console-base-address-during-runtim.patch
+0202-fix-imx8m-make-IMX_BOOT_UART_BASE-autodetection-opti.patch
+# umpf-release: 2.8/customers/pengutronix/distrokit/20240111-1
+# umpf-topic-range: 844a61329bf4e262a18da834cf38d7ae483b6923..fdbd2dd6296701b615fc6cc70a90eae4242c6ad8
+0301-Release-2.8-customers-pengutronix-distrokit-20240111.patch
# umpf-end
base-commit: 593eec995f082b6ca7caab0e9da4ce95f0c78477
--
2.39.2
next prev parent reply other threads:[~2024-01-11 15:01 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-11 15:01 [DistroKit] [PATCH v1 0/5] v8a: imx8m: add i.MX8MP based TQ MBa8MPxL board Leonard Göhrs
2024-01-11 15:01 ` Leonard Göhrs [this message]
2024-01-11 18:03 ` [DistroKit] [PATCH v1 1/5] tf-a: add patch to auto-detect the correct UART on i.MX8M Ahmad Fatoum
2024-01-16 10:50 ` Leonard Göhrs
2024-01-16 11:08 ` Marco Felsch
2024-01-11 15:01 ` [DistroKit] [PATCH v1 2/5] v8a: images: imx8m: add barebox state partition Leonard Göhrs
2024-01-11 17:07 ` Jan Lübbe
2024-01-11 18:06 ` Ahmad Fatoum
2024-01-11 15:01 ` [DistroKit] [PATCH v1 3/5] v8a: imx8m: add i.MX8MP based TQ MBa8MPxL board Leonard Göhrs
2024-01-11 15:01 ` [DistroKit] [PATCH v1 4/5] v8a: imx8m: enable image generation for TQ MBa8MPxL Leonard Göhrs
2024-01-11 15:01 ` [DistroKit] [PATCH v1 5/5] v8a: imx8m: enable barebox state " Leonard Göhrs
2024-01-11 18:08 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240111150117.3678555-2-l.goehrs@pengutronix.de \
--to=l.goehrs@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox