From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH v2 4/6] v8a: barebox: version bump v2023.09.0 -> v2023.12.0
Date: Fri, 12 Jan 2024 18:05:27 +0100 [thread overview]
Message-ID: <20240112170529.1970537-4-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20240112170529.1970537-1-a.fatoum@pengutronix.de>
There's not much new features relevant to our v8a platform in this
version bump, but there are a number of bug fixes, that may be relevant,
like improved support for HAB on i.MX8M and reworked regulator
initialization.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
- remove stack protector for i.MX6 for now. CAAM is very talkative on
debug log level rendering dmesg less useful. We should address that
before reenabling it.
---
configs/platform-v8a/barebox.config | 40 +++++++++++++++++++++++++----
configs/platform-v8a/platformconfig | 4 +--
2 files changed, 37 insertions(+), 7 deletions(-)
diff --git a/configs/platform-v8a/barebox.config b/configs/platform-v8a/barebox.config
index fef9397c784c..f90264d489b3 100644
--- a/configs/platform-v8a/barebox.config
+++ b/configs/platform-v8a/barebox.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.09.0 Configuration
+# Barebox/arm 2023.12.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -15,6 +15,7 @@ CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_ARM64_VIRT is not set
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_IMX=y
+# CONFIG_ARCH_K3 is not set
CONFIG_ARCH_ROCKCHIP=y
# CONFIG_ARCH_ZYNQMP is not set
@@ -32,6 +33,9 @@ CONFIG_CPU_64v8=y
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
CONFIG_ARCH_TEXT_BASE=0x0
CONFIG_ARCH_IMX_IMXIMAGE=y
+CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
+CONFIG_ARCH_IMX_ATF=y
+CONFIG_ARCH_IMX_ROMAPI=y
#
# i.MX boards
@@ -51,6 +55,7 @@ CONFIG_MACH_NXP_IMX8MM_EVK=y
CONFIG_MACH_NXP_IMX8MN_EVK=y
CONFIG_MACH_NXP_IMX8MP_EVK=y
CONFIG_MACH_NXP_IMX8MQ_EVK=y
+# CONFIG_MACH_PHYTEC_SOM_IMX8MM is not set
CONFIG_MACH_PHYTEC_SOM_IMX8MQ=y
# CONFIG_MACH_POLYHEX_DEBIX is not set
# CONFIG_MACH_PROTONIC_IMX8M is not set
@@ -58,6 +63,11 @@ CONFIG_MACH_PHYTEC_SOM_IMX8MQ=y
# CONFIG_MACH_TQ_MBA8MPXL is not set
# CONFIG_MACH_VARISCITE_DT8MCUSTOMBOARD_IMX8MP is not set
# CONFIG_MACH_ZII_IMX8MQ_DEV is not set
+
+#
+# i.MX93 boards
+#
+# CONFIG_MACH_TQ_MBA9XXXCA is not set
# end of i.MX boards
#
@@ -161,6 +171,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_ALIGNMENT=8
# end of memory layout
# CONFIG_EXPERIMENTAL is not set
@@ -184,7 +195,6 @@ CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
# CONFIG_PASSWORD is not set
-CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
@@ -504,6 +514,7 @@ CONFIG_REGMAP_I2C=y
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
+CONFIG_OF=y
CONFIG_OFDEVICE=y
CONFIG_FEATURE_CONTROLLER_FIXUP=y
CONFIG_OF_GPIO=y
@@ -524,6 +535,7 @@ CONFIG_SERIAL_DEV_BUS=y
CONFIG_DRIVER_SERIAL_IMX=y
CONFIG_DRIVER_SERIAL_NS16550=y
# CONFIG_DRIVER_SERIAL_CADENCE is not set
+# CONFIG_DRIVER_SERIAL_LPUART32 is not set
# CONFIG_SERIAL_SIFIVE is not set
# end of serial drivers
@@ -605,6 +617,7 @@ CONFIG_I2C=y
#
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_IMX=y
+# CONFIG_I2C_IMX_LPI2C is not set
# CONFIG_I2C_DESIGNWARE is not set
# CONFIG_I2C_MV64XXX is not set
CONFIG_I2C_RK3X=y
@@ -678,7 +691,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_ONBOARD_HUB is not set
# CONFIG_TYPEC_TUSB320 is not set
CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_GADGET_DRIVER_ARC=y
CONFIG_USB_GADGET_AUTOSTART=y
@@ -715,6 +727,7 @@ CONFIG_MCI_ROCKCHIP_DWCMSHC=y
CONFIG_MCI_IMX_ESDHC=y
# CONFIG_MCI_IMX_ESDHC_PIO is not set
CONFIG_MCI_ARASAN=y
+# CONFIG_MCI_AM654 is not set
# CONFIG_MCI_SPI is not set
CONFIG_MCI_IMX_ESDHC_PBL=y
CONFIG_HAVE_CLK=y
@@ -747,6 +760,7 @@ CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TWL6030 is not set
# CONFIG_RAVE_SP_CORE is not set
# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_PCA9450 is not set
# CONFIG_MFD_RN568PMIC is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
CONFIG_MFD_RK808=y
@@ -795,7 +809,9 @@ CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_POLLER is not set
CONFIG_WATCHDOG_DW=y
CONFIG_WATCHDOG_IMX=y
+# CONFIG_WATCHDOG_IMXULP is not set
# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_PWM is not set
# CONFIG_HWRNG is not set
@@ -840,6 +856,7 @@ CONFIG_NVMEM=y
CONFIG_IMX_OCOTP=y
# CONFIG_IMX_OCOTP_WRITE is not set
# CONFIG_EEPROM_93XX46 is not set
+CONFIG_NVMEM_ROCKCHIP_OTP=y
#
# Bus devices
@@ -943,10 +960,12 @@ CONFIG_IMX8M_FEATCTRL=y
# end of NVME Support
#
-# i.MX8M DDR controllers
+# i.MX DDR controllers
#
+CONFIG_IMX_DRAM=y
CONFIG_IMX8M_DRAM=y
-# end of i.MX8M DDR controllers
+# CONFIG_IMX9_DRAM is not set
+# end of i.MX DDR controllers
CONFIG_REBOOT_MODE=y
CONFIG_SYSCON_REBOOT_MODE=y
@@ -956,6 +975,7 @@ CONFIG_SYSCON_REBOOT_MODE=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
+# CONFIG_MAILBOX is not set
# end of Drivers
#
@@ -1044,6 +1064,16 @@ CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
+#
+# Hardening options
+#
+# CONFIG_STACK_GUARD_PAGE is not set
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Hardening options
+
#
# Crypto support
#
diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
index cfbaea98a2bc..b71b361952ae 100644
--- a/configs/platform-v8a/platformconfig
+++ b/configs/platform-v8a/platformconfig
@@ -180,10 +180,10 @@ PTXCONF_CONSOLE_SPEED="115200"
PTXCONF_BAREBOX_ARCH_STRING="arm"
PTXCONF_BAREBOX_DEPENDENCIES=y
PTXCONF_BAREBOX=y
-PTXCONF_BAREBOX_VERSION="2023.09.0"
+PTXCONF_BAREBOX_VERSION="2023.12.0"
PTXCONF_BAREBOX_CONFIG_BUILDSYSTEM_VERSION=y
PTXCONF_BAREBOX_BUILDSYSTEM_VERSION="${PTXDIST_VCS_VERSION}"
-PTXCONF_BAREBOX_MD5="a605929ca1d8295fc43b5e1f309152c9"
+PTXCONF_BAREBOX_MD5="e1513be5a2995203b75ac45043eac6d0"
PTXCONF_BAREBOX_CONFIG="barebox.config"
PTXCONF_BAREBOX_FIRMWARE=y
PTXCONF_BAREBOX_EXTRA_ENV=y
--
2.39.2
next prev parent reply other threads:[~2024-01-12 17:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-12 17:05 [DistroKit] [PATCH v2 1/6] v8a: barebox: disable RATP support Ahmad Fatoum
2024-01-12 17:05 ` [DistroKit] [PATCH v2 2/6] v8a: barebox: disable unnecessary commands Ahmad Fatoum
2024-01-12 17:05 ` [DistroKit] [PATCH v2 3/6] v8a: barebox: disable RAVE SP coprocessor support Ahmad Fatoum
2024-01-12 17:05 ` Ahmad Fatoum [this message]
2024-01-12 17:05 ` [DistroKit] [PATCH v2 5/6] v7a: update barebox to v2023.09.0 -> v2023.12.0 Ahmad Fatoum
2024-01-12 17:05 ` [DistroKit] [PATCH v2 6/6] v8a: barebox: enable support for booting FIT images Ahmad Fatoum
2024-01-23 9:35 ` Roland Hieber
2024-01-26 16:42 ` [DistroKit] [PATCH v2 1/6] v8a: barebox: disable RATP support Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240112170529.1970537-4-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox