From: Alexander Dahl <ada@thorsis.com>
To: distrokit@pengutronix.de
Subject: [DistroKit] [PATCH 1/3] platform: v7a: barebox: Upgrade from 2023.12.0 to 2024.01.0
Date: Thu, 15 Feb 2024 16:05:30 +0100 [thread overview]
Message-ID: <20240215150532.2702910-2-ada@thorsis.com> (raw)
In-Reply-To: <20240215150532.2702910-1-ada@thorsis.com>
The latest and greatest. Has the nice support for 'noload' sub-images
in FIT images conforming for spec.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---
configs/platform-v7a/barebox-am335x-mlo.config | 10 +++++++++-
configs/platform-v7a/barebox-am335x.config | 11 ++++++++++-
configs/platform-v7a/barebox-am335x.config.diff | 3 +--
configs/platform-v7a/barebox-at91.config | 11 ++++++++++-
configs/platform-v7a/barebox-at91.config.diff | 3 +--
configs/platform-v7a/barebox-mx6.config | 12 +++++++++++-
configs/platform-v7a/barebox-mx6.config.diff | 4 ++--
configs/platform-v7a/barebox-rpi2.config | 12 ++++++++++--
configs/platform-v7a/barebox-rpi2.config.diff | 2 +-
configs/platform-v7a/barebox-stm32mp.config | 13 +++++++++++--
configs/platform-v7a/barebox-stm32mp.config.diff | 3 ++-
configs/platform-v7a/barebox-vexpress.config | 11 ++++++++++-
configs/platform-v7a/barebox-vexpress.config.diff | 3 +--
configs/platform-v7a/barebox.config | 12 ++++++++++--
configs/platform-v7a/platformconfig | 4 ++--
15 files changed, 91 insertions(+), 23 deletions(-)
diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
index b652d28..12707b7 100644
--- a/configs/platform-v7a/barebox-am335x-mlo.config
+++ b/configs/platform-v7a/barebox-am335x-mlo.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
@@ -188,6 +188,7 @@ CONFIG_DEFAULT_LOGLEVEL=7
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -412,6 +413,12 @@ CONFIG_TI_SYSC=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -458,6 +465,7 @@ CONFIG_TI_SYSC=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
index 54453ae..fbcdc25 100644
--- a/configs/platform-v7a/barebox-am335x.config
+++ b/configs/platform-v7a/barebox-am335x.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -244,6 +244,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
CONFIG_DEBUG_OMAP_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -529,6 +530,7 @@ CONFIG_DRIVER_NET_CPSW=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -819,6 +821,12 @@ CONFIG_REGULATOR_FIXED=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -866,6 +874,7 @@ CONFIG_REGULATOR_FIXED=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
index 7354b58..c0c929c 100644
--- a/configs/platform-v7a/barebox-am335x.config.diff
+++ b/configs/platform-v7a/barebox-am335x.config.diff
@@ -1,4 +1,4 @@
-53d21fb44946357f79471694e33102cc
+60c98fdd624cc491e6ab694be209074e
# CONFIG_AM33XX_NET_BOOT is not set
CONFIG_ARCH_AM33XX=y
# CONFIG_ARCH_BCM283X is not set
@@ -8,7 +8,6 @@ CONFIG_ARCH_OMAP_MULTI=y
CONFIG_ARM_ASM_UNIFIED=y
CONFIG_ARM_BOARD_APPEND_ATAG=y
# CONFIG_ARM_BOARD_PREPEND_ATAG is not set
-# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
# CONFIG_BAREBOX_UPDATE_AM33XX_EMMC is not set
diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
index eac5266..a8bef53 100644
--- a/configs/platform-v7a/barebox-at91.config
+++ b/configs/platform-v7a/barebox-at91.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -254,6 +254,7 @@ CONFIG_DEBUG_AT91_UART_BASE=0xfc069000
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -542,6 +543,7 @@ CONFIG_DRIVER_NET_MICREL=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -824,6 +826,12 @@ CONFIG_REGULATOR_FIXED=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -873,6 +881,7 @@ CONFIG_ATMEL_EBI=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
index b2e86af..34e71cb 100644
--- a/configs/platform-v7a/barebox-at91.config.diff
+++ b/configs/platform-v7a/barebox-at91.config.diff
@@ -1,4 +1,4 @@
-53d21fb44946357f79471694e33102cc
+60c98fdd624cc491e6ab694be209074e
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_IMX is undefined
@@ -7,7 +7,6 @@ CONFIG_ARCH_AT91=y
# CONFIG_ARCH_ROCKCHIP is undefined
CONFIG_ARCH_TEXT_BASE=0x23f00000
# CONFIG_ARM_AMBA is undefined
-# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
CONFIG_AT91SAM9_SMC=y
diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
index b235585..5e2d649 100644
--- a/configs/platform-v7a/barebox-mx6.config
+++ b/configs/platform-v7a/barebox-mx6.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -140,6 +140,7 @@ CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_WARP7 is not set
# CONFIG_MACH_FREESCALE_MX7_SABRESD is not set
# CONFIG_MACH_PHYTEC_PHYCORE_IMX7 is not set
+# CONFIG_MACH_VARISCITE_SOM_MX7 is not set
# CONFIG_MACH_ZII_IMX7D_DEV is not set
# CONFIG_MACH_KAMSTRUP_MX7_CONCENTRATOR is not set
@@ -336,6 +337,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
CONFIG_DEBUG_IMX_UART_PORT=1
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -631,6 +633,7 @@ CONFIG_AT803X_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
@@ -985,6 +988,12 @@ CONFIG_HW_HAS_PCI=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -1036,6 +1045,7 @@ CONFIG_USB_NOP_XCEIV=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
index 90a8680..dd4df80 100644
--- a/configs/platform-v7a/barebox-mx6.config.diff
+++ b/configs/platform-v7a/barebox-mx6.config.diff
@@ -1,4 +1,4 @@
-53d21fb44946357f79471694e33102cc
+60c98fdd624cc491e6ab694be209074e
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_FEC_IMX=y
CONFIG_ARCH_HAS_IMX_GPT=y
@@ -10,7 +10,6 @@ CONFIG_ARCH_IMX_IMXIMAGE=y
# CONFIG_ARCH_IMX_USBLOADER is not set
# CONFIG_ARCH_TEXT_BASE is undefined
CONFIG_ARM_ASM_UNIFIED=y
-# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
# CONFIG_ARM_USE_COMPRESSED_DTB is undefined
@@ -157,6 +156,7 @@ CONFIG_MACH_SABRELITE=y
# CONFIG_MACH_UDOO is not set
CONFIG_MACH_UDOO_NEO=y
# CONFIG_MACH_VARISCITE_MX6 is not set
+# CONFIG_MACH_VARISCITE_SOM_MX7 is not set
# CONFIG_MACH_VF610_TWR is not set
# CONFIG_MACH_WARP7 is not set
# CONFIG_MACH_WEBASTO_CCBV2 is not set
diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
index 252c115..43e5ba6 100644
--- a/configs/platform-v7a/barebox-rpi2.config
+++ b/configs/platform-v7a/barebox-rpi2.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -236,6 +236,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -518,6 +519,7 @@ CONFIG_DRIVER_NET_BCMGENET=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -797,8 +799,13 @@ CONFIG_REGULATOR_BCM283X=y
# Firmware Drivers
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -848,6 +855,7 @@ CONFIG_USB_NOP_XCEIV=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
index 9961863..692f645 100644
--- a/configs/platform-v7a/barebox-rpi2.config.diff
+++ b/configs/platform-v7a/barebox-rpi2.config.diff
@@ -1,4 +1,4 @@
-53d21fb44946357f79471694e33102cc
+60c98fdd624cc491e6ab694be209074e
CONFIG_ARM_ASM_UNIFIED=y
# CONFIG_CMD_NVMEM is not set
CONFIG_DRIVER_NET_BCMGENET=y
diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
index 7bbae9c..539f0a9 100644
--- a/configs/platform-v7a/barebox-stm32mp.config
+++ b/configs/platform-v7a/barebox-stm32mp.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -233,6 +233,7 @@ CONFIG_DEFAULT_LOGLEVEL=7
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -518,6 +519,7 @@ CONFIG_AT803X_PHY=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
@@ -626,6 +628,7 @@ CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_OF_PROVIDER=y
+CONFIG_COMMON_CLK_STM32MP157=y
CONFIG_COMMON_CLK_GPIO=y
#
@@ -773,8 +776,13 @@ CONFIG_RESET_SIMPLE=y
#
# Firmware Drivers
#
-# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -828,6 +836,7 @@ CONFIG_STM32_FMC2_EBI=y
CONFIG_RESET_STM32=y
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
index 1d49550..f5b6775 100644
--- a/configs/platform-v7a/barebox-stm32mp.config.diff
+++ b/configs/platform-v7a/barebox-stm32mp.config.diff
@@ -1,4 +1,4 @@
-53d21fb44946357f79471694e33102cc
+60c98fdd624cc491e6ab694be209074e
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_HAS_RESET_CONTROLLER=y
CONFIG_ARCH_NR_GPIO=416
@@ -30,6 +30,7 @@ CONFIG_CMD_POWEROFF=y
# CONFIG_CMD_PWM is not set
# CONFIG_CMD_SPI is undefined
# CONFIG_CMD_STACKSMASH is not set
+CONFIG_COMMON_CLK_STM32MP157=y
CONFIG_COMPILE_LOGLEVEL=6
# CONFIG_CONSOLE_ACTIVATE_FIRST is not set
CONFIG_CONSOLE_ACTIVATE_NONE=y
diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
index 3b9ab3a..4fde5e0 100644
--- a/configs/platform-v7a/barebox-vexpress.config
+++ b/configs/platform-v7a/barebox-vexpress.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -221,6 +221,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -499,6 +500,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -743,6 +745,12 @@ CONFIG_REGULATOR=y
# Firmware Drivers
#
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -787,6 +795,7 @@ CONFIG_REGULATOR=y
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
index 973db9d..2d9168e 100644
--- a/configs/platform-v7a/barebox-vexpress.config.diff
+++ b/configs/platform-v7a/barebox-vexpress.config.diff
@@ -1,8 +1,7 @@
-53d21fb44946357f79471694e33102cc
+60c98fdd624cc491e6ab694be209074e
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
-# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
# CONFIG_ARM_USE_COMPRESSED_DTB is undefined
diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
index 9128860..375aa9a 100644
--- a/configs/platform-v7a/barebox.config
+++ b/configs/platform-v7a/barebox.config
@@ -1,6 +1,6 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.12.0 Configuration
+# Barebox/arm 2024.01.0 Configuration
#
CONFIG_ARM=y
CONFIG_ARM_LINUX=y
@@ -236,6 +236,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -517,6 +518,7 @@ CONFIG_PHYLIB=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -791,8 +793,13 @@ CONFIG_REGULATOR_BCM283X=y
# Firmware Drivers
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -839,6 +846,7 @@ CONFIG_REGULATOR_BCM283X=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index 45b5477..bd3463e 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -186,8 +186,8 @@ PTXCONF_AT91BOOTSTRAP2_MD5="ef321a80bf428bfd6cb642c96126ef6c"
PTXCONF_AT91BOOTSTRAP2_CONFIG="at91bootstrap-wifx-l1.config"
PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2023.12.0"
-PTXCONF_BAREBOX_COMMON_MD5="e1513be5a2995203b75ac45043eac6d0"
+PTXCONF_BAREBOX_COMMON_VERSION="2024.01.0"
+PTXCONF_BAREBOX_COMMON_MD5="8a94bdde5eaa1362b6c752f975f9e954"
PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
PTXCONF_BAREBOX_AM335X_MLO=y
PTXCONF_BAREBOX_AM335X=y
--
2.39.2
next prev parent reply other threads:[~2024-02-15 15:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-15 15:05 [DistroKit] [PATCH 0/3] v7a: barebox: Support FIT images Alexander Dahl
2024-02-15 15:05 ` Alexander Dahl [this message]
2024-02-19 12:30 ` [DistroKit] [PATCH 1/3] platform: v7a: barebox: Upgrade from 2023.12.0 to 2024.01.0 Roland Hieber
2024-02-19 19:20 ` Roland Hieber
2024-02-15 15:05 ` [DistroKit] [PATCH 2/3] blspec-entry: Backport fix from ptxdist master Alexander Dahl
2024-02-19 12:28 ` [DistroKit] [PATCH 2/3] squash! " Roland Hieber
2024-02-15 15:05 ` [DistroKit] [PATCH 3/3] platform: v7a: barebox: Enable FIT image support Alexander Dahl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240215150532.2702910-2-ada@thorsis.com \
--to=ada@thorsis.com \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox