From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [PATCH v3 7/8] v7a: kernel: enable STM32MP135F-DK support
Date: Wed, 3 Apr 2024 18:48:14 +0200 [thread overview]
Message-ID: <20240403164815.3929378-8-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20240403164815.3929378-1-a.fatoum@pengutronix.de>
The STM32MP13 shared many kernel config options with the STM32MP15, but
it requires some additional options to support SCMI-over-OP-TEE. Enable
these options as well as support for OTP-over-OPTEE and rng-over-OPTEE.
With the SCMI options enabled, it's possible to boot the STM32MP135F-DK,
so enable build of its device tree for inclusion into the image in the
follow-up commit.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.pengutronix.de/20240315211240.3016716-12-a.fatoum@pengutronix.de
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
v1 -> v3:
- no change
---
configs/platform-v7a/kernelconfig | 8 +++++++-
configs/platform-v7a/platformconfig | 2 +-
2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/configs/platform-v7a/kernelconfig b/configs/platform-v7a/kernelconfig
index 9087a8ae37a2..fb6d2fa8b526 100644
--- a/configs/platform-v7a/kernelconfig
+++ b/configs/platform-v7a/kernelconfig
@@ -1248,7 +1248,9 @@ CONFIG_ARM_SCMI_PROTOCOL=y
# CONFIG_ARM_SCMI_RAW_MODE_SUPPORT is not set
CONFIG_ARM_SCMI_HAVE_TRANSPORT=y
CONFIG_ARM_SCMI_HAVE_SHMEM=y
+CONFIG_ARM_SCMI_HAVE_MSG=y
CONFIG_ARM_SCMI_TRANSPORT_MAILBOX=y
+CONFIG_ARM_SCMI_TRANSPORT_OPTEE=y
CONFIG_ARM_SCMI_TRANSPORT_SMC=y
# CONFIG_ARM_SCMI_TRANSPORT_SMC_ATOMIC_ENABLE is not set
# CONFIG_ARM_SCMI_TRANSPORT_VIRTIO is not set
@@ -1931,6 +1933,7 @@ CONFIG_HW_RANDOM_IPROC_RNG200=y
CONFIG_HW_RANDOM_OMAP=y
CONFIG_HW_RANDOM_VIRTIO=y
CONFIG_HW_RANDOM_STM32=y
+CONFIG_HW_RANDOM_OPTEE=y
# CONFIG_HW_RANDOM_CCTRNG is not set
# CONFIG_HW_RANDOM_XIPHERA is not set
# CONFIG_HW_RANDOM_ARM_SMCCC_TRNG is not set
@@ -3106,6 +3109,7 @@ CONFIG_RTC_I2C_AND_SPI=y
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_OPTEE is not set
# CONFIG_RTC_DRV_ZYNQMP is not set
#
@@ -3578,6 +3582,7 @@ CONFIG_NVMEM_IMX_OCOTP_ELE=y
# CONFIG_NVMEM_MICROCHIP_OTPC is not set
CONFIG_NVMEM_RMEM=y
# CONFIG_NVMEM_SNVS_LPGPR is not set
+CONFIG_NVMEM_STM32_BSEC_OPTEE_TA=y
CONFIG_NVMEM_STM32_ROMEM=y
# CONFIG_NVMEM_U_BOOT_ENV is not set
@@ -3590,7 +3595,8 @@ CONFIG_NVMEM_STM32_ROMEM=y
# CONFIG_FPGA is not set
# CONFIG_FSI is not set
-# CONFIG_TEE is not set
+CONFIG_TEE=y
+CONFIG_OPTEE=y
CONFIG_MULTIPLEXER=y
#
diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
index ab9e5b2e6671..cef14be54d87 100644
--- a/configs/platform-v7a/platformconfig
+++ b/configs/platform-v7a/platformconfig
@@ -138,7 +138,7 @@ PTXCONF_KERNEL_IMAGE_Z=y
PTXCONF_KERNEL_IMAGE="zImage"
PTXCONF_KERNEL_DTB=y
PTXCONF_KERNEL_DTS_PATH="${PTXDIST_PLATFORMCONFIG_SUBDIR}/dts:${KERNEL_DIR}/arch/${GENERIC_KERNEL_ARCH}/boot/dts"
-PTXCONF_KERNEL_DTS="ti/omap/am335x-bone.dts ti/omap/am335x-boneblack.dts arm/vexpress-v2p-ca9.dts broadcom/bcm2836-rpi-2-b.dts nxp/imx/imx6q-sabrelite.dts nxp/imx/imx6sx-udoo-neo-full.dts nxp/imx/imx6dl-riotboard.dts nxp/imx/imx6q-nitrogen6x.dts nxp/imx/imx6qp-nitrogen6_max.dts broadcom/bcm2837-rpi-3-b.dts broadcom/bcm2837-rpi-cm3-io3.dts broadcom/bcm2711-rpi-4-b.dts broadcom/bcm2711-rpi-400.dts st/stm32mp157c-dk2.dts st/stm32mp157c-ev1.dts st/stm32mp157c-lxa-mc1.dts microchip/at91-sama5d27_som1_ek.dts at91-sama5d27_giantboard.dts at91-sama5d4_wifx_l1.dts"
+PTXCONF_KERNEL_DTS="ti/omap/am335x-bone.dts ti/omap/am335x-boneblack.dts arm/vexpress-v2p-ca9.dts broadcom/bcm2836-rpi-2-b.dts nxp/imx/imx6q-sabrelite.dts nxp/imx/imx6sx-udoo-neo-full.dts nxp/imx/imx6dl-riotboard.dts nxp/imx/imx6q-nitrogen6x.dts nxp/imx/imx6qp-nitrogen6_max.dts broadcom/bcm2837-rpi-3-b.dts broadcom/bcm2837-rpi-cm3-io3.dts broadcom/bcm2711-rpi-4-b.dts broadcom/bcm2711-rpi-400.dts st/stm32mp157c-dk2.dts st/stm32mp157c-ev1.dts st/stm32mp157c-lxa-mc1.dts st/stm32mp135f-dk.dts microchip/at91-sama5d27_som1_ek.dts at91-sama5d27_giantboard.dts at91-sama5d4_wifx_l1.dts"
# PTXCONF_KERNEL_DTBO is not set
# PTXCONF_KERNEL_CODE_SIGNING is not set
# PTXCONF_KERNEL_ZSTD is not set
--
2.39.2
next prev parent reply other threads:[~2024-04-03 16:48 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 16:48 [DistroKit] [PATCH v3 0/8] add " Ahmad Fatoum
2024-04-03 16:48 ` [DistroKit] [PATCH v3 1/8] v7a: bootstate: remove unused environment partitions Ahmad Fatoum
2024-04-03 16:48 ` [DistroKit] [PATCH v3 2/8] v7a: barebox: rpi4: fix rpi4 bootstate definition Ahmad Fatoum
2024-04-03 16:48 ` [DistroKit] [PATCH v3 3/8] v7a: images: stm32mp: use barebox-environment partition type UUID Ahmad Fatoum
2024-04-03 16:48 ` [DistroKit] [PATCH v3 4/8] v7a: barebox: enable STM32MP135F-DK support Ahmad Fatoum
2024-04-03 16:48 ` [DistroKit] [PATCH v3 5/8] v7a: build OP-TEE for STM32MP13 Ahmad Fatoum
2024-04-03 16:48 ` [DistroKit] [PATCH v3 6/8] v7a: stm32mp: add TF-A recipe " Ahmad Fatoum
2024-04-03 16:48 ` Ahmad Fatoum [this message]
2024-04-03 16:48 ` [DistroKit] [PATCH v3 8/8] v7a: stm32mp: add image recipe for STM32MP135F-DK Ahmad Fatoum
2024-04-22 14:25 ` [DistroKit] [PATCH v3 0/8] add STM32MP135F-DK support Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240403164815.3929378-8-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox