From: Roland Hieber <rhi@pengutronix.de>
To: distrokit@pengutronix.de
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [DistroKit] [RESEND][PATCH v1 1/6] v7a_noneon: barebox: update to v2024.07.0
Date: Wed, 14 Aug 2024 11:32:04 +0200 [thread overview]
Message-ID: <20240814093207.606528-2-rhi@pengutronix.de> (raw)
In-Reply-To: <20240814093207.606528-1-rhi@pengutronix.de>
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
Besides being a year newer, this update allows us to drop the patches we
have carrying around.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
.../platform-v7a_noneon/barebox-at91.config | 90 +++++--
.../barebox-at91.config.diff | 19 +-
.../barebox-vexpress.config | 81 +++++--
.../barebox-vexpress.config.diff | 5 +-
configs/platform-v7a_noneon/barebox.config | 84 +++++--
...nable-ddramc-for-sama5d3-and-sama5d4.patch | 32 ---
...port-for-SAMA5D3-Ethernet-Developmen.patch | 219 ------------------
...ip-ksz9477-evb-migrate-to-sama5d3_ba.patch | 23 --
...0-customers-pengutronix-distrokit-sa.patch | 22 --
.../patches/barebox-2023.07.1/series | 13 --
configs/platform-v7a_noneon/platformconfig | 4 +-
11 files changed, 234 insertions(+), 358 deletions(-)
delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
delete mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
index c24b5d36b79d..97f5f2b95031 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config
+++ b/configs/platform-v7a_noneon/barebox-at91.config
@@ -1,11 +1,11 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.07.1-20230706-1 Configuration
+# Barebox/arm 2024.07.0 Configuration
#
CONFIG_ARM=y
+CONFIG_ARCH_TEXT_BASE=0x00000000
CONFIG_ARM_LINUX=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
-CONFIG_TEXT_BASE=0x0
#
# System Type
@@ -13,18 +13,11 @@ CONFIG_TEXT_BASE=0x0
# CONFIG_ARCH_MULTIARCH is not set
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGIC is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP_SINGLE is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_STM32MP is not set
@@ -50,15 +43,16 @@ CONFIG_HAVE_AT91_DDRAMC=y
CONFIG_AT91_MCI_PBL=y
CONFIG_AT91SAM9_SMC=y
CONFIG_HAVE_AT91SAM9_RST=y
+CONFIG_SOC_SAM_V7=y
CONFIG_SOC_SAMA5=y
CONFIG_SOC_SAMA5_MULTI=y
CONFIG_SOC_SAMA5D3=y
-CONFIG_ARCH_TEXT_BASE=0x23f00000
#
# Atmel AT91 System-on-Chip
#
CONFIG_AT91_MULTI_BOARDS=y
+# CONFIG_MACH_CALAO is not set
# CONFIG_MACH_SKOV_ARM9CPU is not set
# CONFIG_MACH_AT91SAM9263EK is not set
# CONFIG_MACH_AT91SAM9X5EK is not set
@@ -143,6 +137,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_ALIGNMENT=8
# end of memory layout
# CONFIG_EXPERIMENTAL is not set
@@ -151,7 +146,9 @@ CONFIG_MALLOC_TLSF=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_KALLSYMS=y
CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_POWEROFF is not set
# CONFIG_PANIC_HANG is not set
+CONFIG_PANIC_RESET=y
CONFIG_PROMPT="barebox:"
CONFIG_BAUDRATE=115200
CONFIG_CBSIZE=1024
@@ -166,7 +163,6 @@ CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
# CONFIG_PASSWORD is not set
-CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
@@ -174,7 +170,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
# CONFIG_BOOTM_VERBOSE is not set
CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
-CONFIG_BOOTM_OFTREE_UIMAGE=y
+# CONFIG_BOOTM_UIMAGE is not set
# CONFIG_BOOTM_AIMAGE is not set
# CONFIG_BOOTM_ELF is not set
# CONFIG_BOOTM_FITIMAGE is not set
@@ -195,6 +191,7 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PBL_CONSOLE=y
# CONFIG_CONSOLE_RATP is not set
CONFIG_PARTITION=y
+CONFIG_PARTITION_MANIPULATION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
CONFIG_PARTITION_DISK_EFI=y
@@ -234,11 +231,14 @@ CONFIG_FASTBOOT_CMD_OEM=y
#
CONFIG_COMPILE_LOGLEVEL=6
CONFIG_DEFAULT_LOGLEVEL=6
+CONFIG_HAS_DEBUG_LL=y
# CONFIG_DEBUG_LL is not set
CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DEBUG_LIST is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -252,9 +252,9 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
#
# EFI (Extensible Firmware Interface) Support
#
+CONFIG_HAVE_EFI_STUB=y
# end of EFI (Extensible Firmware Interface) Support
-CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
@@ -310,6 +310,8 @@ CONFIG_CMD_UIMAGE=y
# CONFIG_CMD_PARTITION is not set
CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_MOUNT=y
+# CONFIG_CMD_FINDMNT is not set
+CONFIG_CMD_PARTED=y
CONFIG_CMD_UBI=y
CONFIG_CMD_UBIFORMAT=y
CONFIG_CMD_UMOUNT=y
@@ -439,6 +441,7 @@ CONFIG_CMD_USBGADGET=y
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_BLOBGEN is not set
# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_KALLSYMS is not set
# CONFIG_CMD_OF_COMPATIBLE is not set
# CONFIG_CMD_OF_DIFF is not set
CONFIG_CMD_OF_DUMP=y
@@ -454,6 +457,7 @@ CONFIG_CMD_TIME=y
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
# CONFIG_CMD_SEED is not set
+# CONFIG_CMD_STACKSMASH is not set
# end of Miscellaneous
# end of Commands
@@ -475,6 +479,7 @@ CONFIG_REGMAP_SPI=y
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
+CONFIG_OF=y
CONFIG_OFDEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_BAREBOX_DRIVERS=y
@@ -523,6 +528,7 @@ CONFIG_DRIVER_NET_MICREL=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
CONFIG_MICREL_PHY=y
@@ -597,17 +603,38 @@ CONFIG_MTD_M25P80=y
# end of Self contained MTD devices
# CONFIG_DRIVER_CFI is not set
+
+#
+# NAND
+#
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_RAW_NAND=y
CONFIG_NAND=y
CONFIG_MTD_NAND_ECC_SOFT=y
-CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_NAND_ECC_HW_SYNDROME is not set
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
+CONFIG_NAND_NEED_EXEC_OP=y
+
+#
+# Raw/parallel NAND flash controllers
+#
CONFIG_NAND_ATMEL=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
# CONFIG_MTD_NAND_DENALI is not set
+
+#
+# ECC engine support
+#
+CONFIG_MTD_NAND_ECC=y
+# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
+CONFIG_MTD_NAND_ECC_SW_BCH=y
+# end of ECC engine support
+# end of NAND
+
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
# CONFIG_SPI_CADENCE_QUADSPI is not set
+# CONFIG_SPI_SYNOPSYS_OCTALSPI_NOR is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
# CONFIG_MTD_UBI_FASTMAP is not set
@@ -669,6 +696,7 @@ CONFIG_MCI=y
#
# --- Feature list ---
#
+# CONFIG_MCI_TUNING is not set
# CONFIG_MCI_STARTUP is not set
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
@@ -678,11 +706,13 @@ CONFIG_MCI_MMC_BOOT_PARTITIONS=y
#
# --- MCI host drivers ---
#
+# CONFIG_MCI_DWC_MSHC is not set
# CONFIG_MCI_DW is not set
# CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
CONFIG_MCI_ATMEL=y
CONFIG_MCI_ATMEL_SDHCI=y
# CONFIG_MCI_ARASAN is not set
+# CONFIG_MCI_AM654 is not set
# CONFIG_MCI_SPI is not set
CONFIG_MCI_ATMEL_PBL=y
CONFIG_HAVE_CLK=y
@@ -715,6 +745,7 @@ CONFIG_MFD_SYSCON=y
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_PCA9450 is not set
# CONFIG_MFD_RN568PMIC is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_RK808 is not set
@@ -751,6 +782,7 @@ CONFIG_LED_TRIGGERS=y
#
# Input device support
#
+# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
@@ -833,6 +865,12 @@ CONFIG_REGULATOR_FIXED=y
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -869,6 +907,16 @@ CONFIG_ATMEL_EBI=y
# end of KVX SoC drivers
# end of SoC drivers
+#
+# PM Domains
+#
+
+#
+# i.MX PM Domains
+#
+# end of i.MX PM Domains
+# end of PM Domains
+
#
# NVME Support
#
@@ -881,6 +929,8 @@ CONFIG_ATMEL_EBI=y
# CONFIG_POWER_RESET_GPIO_RESTART is not set
CONFIG_VIRTIO_MENU=y
# CONFIG_VIRTIO_MMIO is not set
+# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
@@ -953,6 +1003,7 @@ CONFIG_ZSTD_DECOMPRESS=y
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_BCH=y
+CONFIG_BITREV=y
CONFIG_FNMATCH=y
CONFIG_QSORT=y
CONFIG_LIBSCAN=y
@@ -977,6 +1028,17 @@ CONFIG_ARCH_HAS_ZERO_PAGE=y
CONFIG_GENERIC_ALLOCATOR=y
# end of Library routines
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+CONFIG_STACK_GUARD_PAGE=y
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Hardening options
+
#
# Crypto support
#
diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
index e2cdc16d00ff..9f362cd4f8aa 100644
--- a/configs/platform-v7a_noneon/barebox-at91.config.diff
+++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
@@ -1,14 +1,13 @@
-71b0583d9737e188a32240ae7d29a558
+e4e5faf13c3a7da2755222882364530a
CONFIG_ARCH_AT91=y
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_IMX is undefined
+# CONFIG_ARCH_LAYERSCAPE is undefined
# CONFIG_ARCH_MULTIARCH is not set
# CONFIG_ARCH_OMAP_MULTI is undefined
# CONFIG_ARCH_ROCKCHIP is undefined
-CONFIG_ARCH_TEXT_BASE=0x23f00000
# CONFIG_ARM_AMBA is undefined
# CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
-# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
CONFIG_AT91SAM9_SMC=y
@@ -16,11 +15,12 @@ CONFIG_AT91_MCI_PBL=y
CONFIG_AT91_MULTI_BOARDS=y
CONFIG_ATMEL_EBI=y
CONFIG_BCH=y
+CONFIG_BITREV=y
# CONFIG_BOARD_ARM_GENERIC_DT is not set
# CONFIG_BOARD_GENERIC_DT is undefined
-CONFIG_BOOTM_OFTREE_UIMAGE=y
# CONFIG_BOOTM_VERBOSE is not set
# CONFIG_BZLIB is not set
+# CONFIG_CADENCE_WATCHDOG is undefined
CONFIG_CLOCKSOURCE_ATMEL_PIT=y
# CONFIG_CLOCKSOURCE_BCM283X is undefined
# CONFIG_CMD_ARM_MMUINFO is not set
@@ -89,6 +89,9 @@ CONFIG_HAVE_AT91_USB_CLK=y
CONFIG_HAVE_AT91_UTMI=y
# CONFIG_HAVE_DIGEST_SHA1 is undefined
# CONFIG_HWRNG is not set
+# CONFIG_HW_RANDOM_BCM2835 is undefined
+# CONFIG_HW_RANDOM_IPROC_RNG200 is undefined
+# CONFIG_HW_RANDOM_TIMERIOMEM is undefined
# CONFIG_I2C_ALGOBIT is undefined
# CONFIG_I2C_AT91 is not set
# CONFIG_I2C_BCM283X is undefined
@@ -102,6 +105,7 @@ CONFIG_LIBUBIGEN=y
# CONFIG_MACHINE_ID is undefined
# CONFIG_MACH_AT91SAM9263EK is not set
# CONFIG_MACH_AT91SAM9X5EK is not set
+# CONFIG_MACH_CALAO is not set
CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
# CONFIG_MACH_RPI2 is undefined
@@ -132,10 +136,13 @@ CONFIG_MFD_SYSCON=y
CONFIG_MICREL_PHY=y
# CONFIG_MMUINFO is undefined
CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND_CORE=y
# CONFIG_MTD_NAND_DENALI is not set
+CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_SOFT=y
CONFIG_MTD_NAND_ECC_SW_BCH=y
# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
+CONFIG_MTD_RAW_NAND=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
# CONFIG_MTD_SST25L is not set
@@ -148,6 +155,7 @@ CONFIG_NAND=y
# CONFIG_NAND_ALLOW_ERASE_BAD is not set
CONFIG_NAND_ATMEL=y
# CONFIG_NAND_ECC_HW_SYNDROME is not set
+CONFIG_NAND_NEED_EXEC_OP=y
CONFIG_NET_USB_RTL8152=y
CONFIG_OF_BAREBOX_ENV_IN_FS=y
# CONFIG_OF_OVERLAY is not set
@@ -167,9 +175,11 @@ CONFIG_REGULATOR_FIXED=y
CONFIG_SOC_SAMA5=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5_MULTI=y
+CONFIG_SOC_SAM_V7=y
CONFIG_SPI_ATMEL_QUADSPI=y
# CONFIG_SPI_CADENCE_QUADSPI is not set
CONFIG_SPI_MEM=y
+# CONFIG_SPI_SYNOPSYS_OCTALSPI_NOR is not set
# CONFIG_STATE is not set
# CONFIG_STATE_BACKWARD_COMPATIBLE is undefined
# CONFIG_STATE_CRYPTO is undefined
@@ -198,6 +208,7 @@ CONFIG_W1=y
# CONFIG_WATCHDOG_POLLER is undefined
CONFIG_XXHASH=y
# CONFIG_XZ_DECOMPRESS is not set
+# CONFIG_XZ_DEC_ARM64 is undefined
# CONFIG_XZ_DEC_ARM is undefined
# CONFIG_XZ_DEC_ARMTHUMB is undefined
# CONFIG_XZ_DEC_IA64 is undefined
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
index 09f112d397e1..9423207ea413 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config
@@ -1,10 +1,10 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.07.1-20230706-1 Configuration
+# Barebox/arm 2024.07.0 Configuration
#
CONFIG_ARM=y
+CONFIG_ARCH_TEXT_BASE=0x00000000
CONFIG_ARM_LINUX=y
-CONFIG_TEXT_BASE=0x0
#
# System Type
@@ -12,21 +12,15 @@ CONFIG_TEXT_BASE=0x0
CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGIC is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP_SINGLE is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
# CONFIG_ARCH_BCM283X is not set
# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_OMAP_MULTI is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_STM32MP is not set
@@ -44,7 +38,6 @@ CONFIG_CPU_32v7=y
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
-CONFIG_ARCH_TEXT_BASE=0x0
CONFIG_MACH_VEXPRESS=y
# CONFIG_MACH_VIRT is not set
CONFIG_BOARD_ARM_GENERIC_DT=y
@@ -120,6 +113,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_ALIGNMENT=8
# end of memory layout
# CONFIG_EXPERIMENTAL is not set
@@ -128,7 +122,9 @@ CONFIG_MALLOC_TLSF=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_KALLSYMS=y
CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_POWEROFF is not set
# CONFIG_PANIC_HANG is not set
+CONFIG_PANIC_RESET=y
CONFIG_PROMPT="vexpress: "
CONFIG_BAUDRATE=115200
CONFIG_CBSIZE=1024
@@ -144,7 +140,6 @@ CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
# CONFIG_PASSWORD is not set
-CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
@@ -152,7 +147,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
-# CONFIG_BOOTM_OFTREE_UIMAGE is not set
+# CONFIG_BOOTM_UIMAGE is not set
# CONFIG_BOOTM_AIMAGE is not set
# CONFIG_BOOTM_ELF is not set
# CONFIG_BOOTM_FITIMAGE is not set
@@ -173,6 +168,7 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
CONFIG_PBL_CONSOLE=y
# CONFIG_CONSOLE_RATP is not set
CONFIG_PARTITION=y
+CONFIG_PARTITION_MANIPULATION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
CONFIG_PARTITION_DISK_EFI=y
@@ -217,10 +213,13 @@ CONFIG_FASTBOOT_CMD_OEM=y
#
CONFIG_COMPILE_LOGLEVEL=7
CONFIG_DEFAULT_LOGLEVEL=6
+CONFIG_HAS_DEBUG_LL=y
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PBL is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DEBUG_LIST is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -234,9 +233,9 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
#
# EFI (Extensible Firmware Interface) Support
#
+CONFIG_HAVE_EFI_STUB=y
# end of EFI (Extensible Firmware Interface) Support
-CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
@@ -290,6 +289,8 @@ CONFIG_CMD_UIMAGE=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_MOUNT=y
+# CONFIG_CMD_FINDMNT is not set
+CONFIG_CMD_PARTED=y
CONFIG_CMD_UMOUNT=y
# end of Partition
@@ -416,6 +417,7 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_BLOBGEN is not set
# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_KALLSYMS is not set
# CONFIG_CMD_OF_COMPATIBLE is not set
# CONFIG_CMD_OF_DIFF is not set
CONFIG_CMD_OF_DUMP=y
@@ -432,6 +434,7 @@ CONFIG_CMD_STATE=y
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
# CONFIG_CMD_SEED is not set
+# CONFIG_CMD_STACKSMASH is not set
# end of Miscellaneous
# end of Commands
@@ -450,6 +453,7 @@ CONFIG_NET_FASTBOOT=y
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
+CONFIG_OF=y
CONFIG_OFDEVICE=y
CONFIG_OF_BAREBOX_DRIVERS=y
# CONFIG_OF_BAREBOX_ENV_IN_FS is not set
@@ -497,6 +501,7 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -566,7 +571,20 @@ CONFIG_DRIVER_CFI_BANK_WIDTH_2=y
CONFIG_DRIVER_CFI_BANK_WIDTH_4=y
# CONFIG_DRIVER_CFI_BANK_WIDTH_8 is not set
# CONFIG_CFI_BUFFER_WRITE is not set
+
+#
+# NAND
+#
# CONFIG_NAND is not set
+
+#
+# ECC engine support
+#
+# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
+# CONFIG_MTD_NAND_ECC_SW_BCH is not set
+# end of ECC engine support
+# end of NAND
+
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_DISK=y
@@ -616,6 +634,7 @@ CONFIG_MCI=y
#
# --- Feature list ---
#
+# CONFIG_MCI_TUNING is not set
CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
@@ -625,10 +644,12 @@ CONFIG_MCI_WRITE=y
#
# --- MCI host drivers ---
#
+# CONFIG_MCI_DWC_MSHC is not set
# CONFIG_MCI_DW is not set
# CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
CONFIG_MCI_MMCI=y
# CONFIG_MCI_ARASAN is not set
+# CONFIG_MCI_AM654 is not set
# CONFIG_MCI_SPI is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
@@ -660,6 +681,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_PCA9450 is not set
# CONFIG_MFD_RN568PMIC is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_RK808 is not set
@@ -691,6 +713,7 @@ CONFIG_LED_TRIGGERS=y
#
# Input device support
#
+# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_USB is not set
# CONFIG_INPUT_SPECIALKEYS is not set
# end of Input device support
@@ -698,8 +721,10 @@ CONFIG_LED_TRIGGERS=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_POLLER is not set
# CONFIG_WATCHDOG_DW is not set
+# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_PWM is not set
CONFIG_HWRNG=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
#
# DMA support
@@ -737,6 +762,12 @@ CONFIG_REGULATOR=y
# Firmware Drivers
#
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -772,6 +803,16 @@ CONFIG_REGULATOR=y
# end of KVX SoC drivers
# end of SoC drivers
+#
+# PM Domains
+#
+
+#
+# i.MX PM Domains
+#
+# end of i.MX PM Domains
+# end of PM Domains
+
#
# NVME Support
#
@@ -780,6 +821,8 @@ CONFIG_REGULATOR=y
# CONFIG_POWER_RESET_SYSCON is not set
# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set
# CONFIG_VIRTIO_MENU is not set
+# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
@@ -849,6 +892,7 @@ CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_ARM64=y
# CONFIG_BASE64 is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
@@ -874,6 +918,17 @@ CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+CONFIG_STACK_GUARD_PAGE=y
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Hardening options
+
#
# Crypto support
#
diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
index 36ab78e8ebc3..23060c8178b1 100644
--- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
+++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
@@ -1,8 +1,7 @@
-71b0583d9737e188a32240ae7d29a558
+e4e5faf13c3a7da2755222882364530a
CONFIG_AMBA_SP804=y
# CONFIG_ARCH_BCM283X is not set
CONFIG_ARCH_VEXPRESS=y
-# CONFIG_ARM_SCMI_PROTOCOL is undefined
# CONFIG_ARM_SECURE_MONITOR is undefined
# CONFIG_ARM_SMCCC is undefined
# CONFIG_ARM_USE_COMPRESSED_DTB is undefined
@@ -37,6 +36,8 @@ CONFIG_DRIVER_NET_SMC911X=y
# CONFIG_GPIO_SIFIVE is undefined
# CONFIG_GPIO_SX150X is undefined
# CONFIG_GPIO_WATCHDOG is undefined
+# CONFIG_HW_RANDOM_BCM2835 is undefined
+# CONFIG_HW_RANDOM_IPROC_RNG200 is undefined
# CONFIG_I2C_ALGOBIT is undefined
# CONFIG_I2C_BCM283X is undefined
# CONFIG_I2C_GPIO is undefined
diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
index 9bbc3745d184..8734770abc4d 100644
--- a/configs/platform-v7a_noneon/barebox.config
+++ b/configs/platform-v7a_noneon/barebox.config
@@ -1,11 +1,11 @@
#
# Automatically generated file; DO NOT EDIT.
-# Barebox/arm 2023.07.1-20230706-1 Configuration
+# Barebox/arm 2024.07.0 Configuration
#
CONFIG_ARM=y
+CONFIG_ARCH_TEXT_BASE=0x00000000
CONFIG_ARM_LINUX=y
CONFIG_ARM_USE_COMPRESSED_DTB=y
-CONFIG_TEXT_BASE=0x0
#
# System Type
@@ -13,21 +13,15 @@ CONFIG_TEXT_BASE=0x0
CONFIG_ARCH_MULTIARCH=y
# CONFIG_ARCH_AT91 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_DIGIC is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_MVEBU is not set
# CONFIG_ARCH_MXS is not set
-# CONFIG_ARCH_NOMADIK is not set
-# CONFIG_ARCH_OMAP_SINGLE is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_SOCFPGA is not set
# CONFIG_ARCH_TEGRA is not set
-# CONFIG_ARCH_UEMD is not set
# CONFIG_ARCH_ZYNQ is not set
CONFIG_ARCH_BCM283X=y
# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_LAYERSCAPE is not set
# CONFIG_ARCH_OMAP_MULTI is not set
# CONFIG_ARCH_ROCKCHIP is not set
# CONFIG_ARCH_STM32MP is not set
@@ -45,7 +39,6 @@ CONFIG_CPU_32v7=y
# processor features
#
# CONFIG_BOOT_ENDIANNESS_SWITCH is not set
-CONFIG_ARCH_TEXT_BASE=0x0
CONFIG_MACH_RPI_COMMON=y
CONFIG_MACH_RPI_AARCH_32_64=y
@@ -136,6 +129,7 @@ CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
CONFIG_STACK_SIZE=0x8000
CONFIG_MALLOC_SIZE=0x0
+CONFIG_MALLOC_ALIGNMENT=8
# end of memory layout
# CONFIG_EXPERIMENTAL is not set
@@ -144,7 +138,9 @@ CONFIG_MALLOC_TLSF=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_KALLSYMS=y
CONFIG_RELOCATABLE=y
+# CONFIG_PANIC_POWEROFF is not set
# CONFIG_PANIC_HANG is not set
+CONFIG_PANIC_RESET=y
CONFIG_PROMPT="barebox>"
CONFIG_BAUDRATE=115200
CONFIG_CBSIZE=1024
@@ -160,7 +156,6 @@ CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
CONFIG_MENU=y
# CONFIG_PASSWORD is not set
-CONFIG_DYNAMIC_CRC_TABLE=y
CONFIG_ERRNO_MESSAGES=y
CONFIG_TIMESTAMP=y
CONFIG_BOOTM=y
@@ -168,7 +163,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_VERBOSE=y
CONFIG_BOOTM_INITRD=y
CONFIG_BOOTM_OFTREE=y
-# CONFIG_BOOTM_OFTREE_UIMAGE is not set
+# CONFIG_BOOTM_UIMAGE is not set
# CONFIG_BOOTM_AIMAGE is not set
# CONFIG_BOOTM_ELF is not set
# CONFIG_BOOTM_FITIMAGE is not set
@@ -189,6 +184,7 @@ CONFIG_CONSOLE_ALLOW_COLOR=y
# CONFIG_PBL_CONSOLE is not set
# CONFIG_CONSOLE_RATP is not set
CONFIG_PARTITION=y
+CONFIG_PARTITION_MANIPULATION=y
CONFIG_PARTITION_DISK=y
CONFIG_PARTITION_DISK_DOS=y
CONFIG_PARTITION_DISK_EFI=y
@@ -233,9 +229,12 @@ CONFIG_FASTBOOT_CMD_OEM=y
#
CONFIG_COMPILE_LOGLEVEL=7
CONFIG_DEFAULT_LOGLEVEL=6
+CONFIG_HAS_DEBUG_LL=y
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_INITCALLS is not set
# CONFIG_DEBUG_PROBES is not set
+# CONFIG_DMA_API_DEBUG is not set
+# CONFIG_DEBUG_LIST is not set
# CONFIG_PBL_BREAK is not set
# CONFIG_PRINTF_FULL is not set
# CONFIG_UBSAN is not set
@@ -249,9 +248,9 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
#
# EFI (Extensible Firmware Interface) Support
#
+CONFIG_HAVE_EFI_STUB=y
# end of EFI (Extensible Firmware Interface) Support
-CONFIG_HAS_DEBUG_LL=y
CONFIG_COMMAND_SUPPORT=y
CONFIG_COMPILE_HASH=y
@@ -305,6 +304,8 @@ CONFIG_CMD_UIMAGE=y
CONFIG_CMD_PARTITION=y
CONFIG_CMD_AUTOMOUNT=y
CONFIG_CMD_MOUNT=y
+# CONFIG_CMD_FINDMNT is not set
+CONFIG_CMD_PARTED=y
CONFIG_CMD_UMOUNT=y
# end of Partition
@@ -433,6 +434,7 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
CONFIG_CMD_BAREBOX_UPDATE=y
# CONFIG_CMD_BLOBGEN is not set
# CONFIG_CMD_FIRMWARELOAD is not set
+# CONFIG_CMD_KALLSYMS is not set
# CONFIG_CMD_OF_COMPATIBLE is not set
# CONFIG_CMD_OF_DIFF is not set
CONFIG_CMD_OF_DUMP=y
@@ -449,6 +451,7 @@ CONFIG_CMD_STATE=y
# CONFIG_CMD_DHRYSTONE is not set
# CONFIG_CMD_SPD_DECODE is not set
# CONFIG_CMD_SEED is not set
+# CONFIG_CMD_STACKSMASH is not set
# end of Miscellaneous
# end of Commands
@@ -467,6 +470,7 @@ CONFIG_NET_FASTBOOT=y
CONFIG_OFTREE=y
CONFIG_OFTREE_MEM_GENERIC=y
CONFIG_DTC=y
+CONFIG_OF=y
CONFIG_OFDEVICE=y
CONFIG_OF_GPIO=y
CONFIG_OF_BAREBOX_DRIVERS=y
@@ -515,6 +519,7 @@ CONFIG_PHYLIB=y
# CONFIG_DAVICOM_PHY is not set
# CONFIG_DP83867_PHY is not set
# CONFIG_DP83TD510_PHY is not set
+# CONFIG_DP83TG720_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
@@ -582,7 +587,20 @@ CONFIG_MTD_OOB_DEVICE=y
# end of Self contained MTD devices
# CONFIG_DRIVER_CFI is not set
+
+#
+# NAND
+#
# CONFIG_NAND is not set
+
+#
+# ECC engine support
+#
+# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
+# CONFIG_MTD_NAND_ECC_SW_BCH is not set
+# end of ECC engine support
+# end of NAND
+
# CONFIG_MTD_SPI_NOR is not set
# CONFIG_MTD_UBI is not set
CONFIG_DISK=y
@@ -632,6 +650,7 @@ CONFIG_MCI=y
#
# --- Feature list ---
#
+# CONFIG_MCI_TUNING is not set
CONFIG_MCI_STARTUP=y
CONFIG_MCI_INFO=y
CONFIG_MCI_WRITE=y
@@ -641,12 +660,14 @@ CONFIG_MCI_WRITE=y
#
# --- MCI host drivers ---
#
+# CONFIG_MCI_DWC_MSHC is not set
# CONFIG_MCI_DW is not set
# CONFIG_MCI_ROCKCHIP_DWCMSHC is not set
# CONFIG_MCI_BCM283X is not set
# CONFIG_MCI_BCM283X_SDHOST is not set
CONFIG_MCI_MMCI=y
# CONFIG_MCI_ARASAN is not set
+# CONFIG_MCI_AM654 is not set
# CONFIG_MCI_SPI is not set
CONFIG_HAVE_CLK=y
CONFIG_CLKDEV_LOOKUP=y
@@ -678,6 +699,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
# CONFIG_MFD_TWL4030 is not set
# CONFIG_MFD_TWL6030 is not set
# CONFIG_MFD_STPMIC1 is not set
+# CONFIG_MFD_PCA9450 is not set
# CONFIG_MFD_RN568PMIC is not set
# CONFIG_MFD_ATMEL_FLEXCOM is not set
# CONFIG_MFD_RK808 is not set
@@ -714,6 +736,7 @@ CONFIG_LED_TRIGGERS=y
#
# Input device support
#
+# CONFIG_INPUT_EVBUG is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_USB is not set
@@ -725,8 +748,12 @@ CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_DW is not set
# CONFIG_WATCHDOG_BCM2835 is not set
# CONFIG_GPIO_WATCHDOG is not set
+# CONFIG_CADENCE_WATCHDOG is not set
# CONFIG_PWM is not set
CONFIG_HWRNG=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM_BCM2835 is not set
+# CONFIG_HW_RANDOM_IPROC_RNG200 is not set
#
# DMA support
@@ -785,8 +812,13 @@ CONFIG_REGULATOR_BCM283X=y
# Firmware Drivers
#
# CONFIG_FIRMWARE_ALTERA_SERIAL is not set
-# CONFIG_ARM_SCMI_PROTOCOL is not set
# CONFIG_QEMU_FW_CFG is not set
+
+#
+# ARM System Control and Management Interface Protocol
+#
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# end of ARM System Control and Management Interface Protocol
# end of Firmware Drivers
#
@@ -822,6 +854,16 @@ CONFIG_REGULATOR_BCM283X=y
# end of KVX SoC drivers
# end of SoC drivers
+#
+# PM Domains
+#
+
+#
+# i.MX PM Domains
+#
+# end of i.MX PM Domains
+# end of PM Domains
+
#
# NVME Support
#
@@ -832,6 +874,8 @@ CONFIG_REGULATOR_BCM283X=y
# CONFIG_POWER_RESET_GPIO is not set
# CONFIG_POWER_RESET_GPIO_RESTART is not set
# CONFIG_VIRTIO_MENU is not set
+# CONFIG_MAILBOX is not set
+# CONFIG_TEE is not set
# end of Drivers
#
@@ -901,6 +945,7 @@ CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
+CONFIG_XZ_DEC_ARM64=y
# CONFIG_BASE64 is not set
CONFIG_PROCESS_ESCAPE_SEQUENCE=y
CONFIG_LZO_DECOMPRESS=y
@@ -926,6 +971,17 @@ CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
CONFIG_ARCH_HAS_ZERO_PAGE=y
# end of Library routines
+#
+# Hardening options
+#
+# CONFIG_BUG_ON_DATA_CORRUPTION is not set
+CONFIG_STACK_GUARD_PAGE=y
+CONFIG_STACKPROTECTOR_NONE=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_PBL_STACKPROTECTOR_NONE=y
+# CONFIG_PBL_STACKPROTECTOR_STRONG is not set
+# end of Hardening options
+
#
# Crypto support
#
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
deleted file mode 100644
index 1afe82806d60..000000000000
--- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
+++ /dev/null
@@ -1,32 +0,0 @@
-From: Oleksij Rempel <o.rempel@pengutronix.de>
-Date: Thu, 6 Jul 2023 09:04:40 +0200
-Subject: [PATCH] ARM: at91: enable ddramc for sama5d3 and sama5d4
-
-ddramc has already support for sama5d3 and sama5d4, so enable it
-officially.
-
-Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
----
- arch/arm/mach-at91/Kconfig | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
-index b803a1185d20..349586b68339 100644
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -104,6 +104,7 @@ config SOC_SAMA5D3
- select HAVE_AT91_UTMI
- select PINCTRL_AT91
- select HAS_MACB
-+ select HAVE_AT91_DDRAMC
-
- config SOC_SAMA5D4
- bool
-@@ -116,6 +117,7 @@ config SOC_SAMA5D4
- select HAVE_AT91_UTMI
- select PINCTRL_AT91
- select HAS_MACB
-+ select HAVE_AT91_DDRAMC
-
- config SOC_SAM9X60
- bool
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
deleted file mode 100644
index 7aeec243824b..000000000000
--- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
+++ /dev/null
@@ -1,219 +0,0 @@
-From: Oleksij Rempel <o.rempel@pengutronix.de>
-Date: Tue, 4 Jul 2023 06:35:09 +0200
-Subject: [PATCH] ARM: at91: add support for SAMA5D3 - Ethernet Development
- System Board
-
-Microchip Technology SAMA5D3 Ethernet Development System (EDS) Board
-(DM320114) is an MPU-based platform for evaluating Ethernet Switch and
-PHY products. Compatible Ethernet Switch and PHY Evaluation Boards
-connect to the SAMA5D3 EDS Board via either an RGMII or RMII connector.
-The Microchip Technology SAMA5D3 EDS Board is not intended for
-stand-alone use and has no Ethernet capabilities when no daughter board
-or an USB Ethernet adapter is connected.
-
-For more information see:
-https://www.microchip.com/en-us/development-tool/DM320114
-
-Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
----
- Documentation/boards/at91.rst | 2 +
- arch/arm/boards/Makefile | 1 +
- arch/arm/boards/microchip-sama5d3-eds/Makefile | 3 ++
- arch/arm/boards/microchip-sama5d3-eds/lowlevel.c | 62 ++++++++++++++++++++++++
- arch/arm/configs/at91_multi_defconfig | 1 +
- arch/arm/dts/Makefile | 1 +
- arch/arm/dts/at91-microchip-sama5d3-eds.dts | 14 ++++++
- arch/arm/mach-at91/Kconfig | 10 ++++
- images/Makefile.at91 | 9 ++++
- 9 files changed, 103 insertions(+)
- create mode 100644 arch/arm/boards/microchip-sama5d3-eds/Makefile
- create mode 100644 arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
- create mode 100644 arch/arm/dts/at91-microchip-sama5d3-eds.dts
-
-diff --git a/Documentation/boards/at91.rst b/Documentation/boards/at91.rst
-index f502979df6eb..961ef58d84ac 100644
---- a/Documentation/boards/at91.rst
-+++ b/Documentation/boards/at91.rst
-@@ -35,6 +35,8 @@ The resulting images will be placed under ``images/``:
- barebox-at91sam9263ek.img
- barebox-microchip-ksz9477-evb.img
- barebox-microchip-ksz9477-evb-xload-mmc.img
-+ barebox-microchip-sama5d3-eds.img
-+ barebox-microchip-sama5d3-eds-xload-mmc.img
- barebox-sama5d3-xplained.img
- barebox-sama5d3-xplained-xload-mmc.img
- barebox-sama5d27-som1-ek.img
-diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
-index 2877debad535..382e649fce62 100644
---- a/arch/arm/boards/Makefile
-+++ b/arch/arm/boards/Makefile
-@@ -121,6 +121,7 @@ obj-$(CONFIG_MACH_SAMA5D27_SOM1) += sama5d27-som1/
- obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/
- obj-$(CONFIG_MACH_SAMA5D3_XPLAINED) += sama5d3_xplained/
- obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/
-+obj-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += microchip-sama5d3-eds/
- obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/
- obj-$(CONFIG_MACH_SAMA5D4_WIFX) += sama5d4_wifx/
- obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/
-diff --git a/arch/arm/boards/microchip-sama5d3-eds/Makefile b/arch/arm/boards/microchip-sama5d3-eds/Makefile
-new file mode 100644
-index 000000000000..458f5209008d
---- /dev/null
-+++ b/arch/arm/boards/microchip-sama5d3-eds/Makefile
-@@ -0,0 +1,3 @@
-+# SPDX-License-Identifier: GPL-2.0-only
-+
-+lwl-y += lowlevel.o
-diff --git a/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
-new file mode 100644
-index 000000000000..79346a9b6ac1
---- /dev/null
-+++ b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
-@@ -0,0 +1,62 @@
-+// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause
-+/*
-+ * Copyright (C) 2014, Atmel Corporation
-+ * Copyright (C) 2018 Ahmad Fatoum, Pengutronix
-+ */
-+
-+#include <common.h>
-+#include <init.h>
-+
-+#include <asm/barebox-arm-head.h>
-+#include <debug_ll.h>
-+#include <mach/at91/barebox-arm.h>
-+#include <mach/at91/iomux.h>
-+#include <mach/at91/sama5d3.h>
-+#include <mach/at91/sama5d3-xplained-ddramc.h>
-+#include <mach/at91/xload.h>
-+
-+/* PCK = 528MHz, MCK = 132MHz */
-+#define MASTER_CLOCK 132000000
-+
-+static void dbgu_init(void)
-+{
-+ void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB);
-+
-+ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_PIOB);
-+
-+ at91_mux_pio3_pin(pio, pin_to_mask(AT91_PIN_PB31), AT91_MUX_PERIPH_A, 0);
-+
-+ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_DBGU);
-+ at91_dbgu_setup_ll(IOMEM(AT91_BASE_DBGU1), MASTER_CLOCK, 115200);
-+
-+ putc_ll('>');
-+}
-+
-+SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds_xload_mmc, r4)
-+{
-+ sama5d3_lowlevel_init();
-+
-+ relocate_to_current_adr();
-+ setup_c();
-+
-+ sama5d3_udelay_init(MASTER_CLOCK);
-+ sama5d3_xplained_ddrconf();
-+ if (IS_ENABLED(CONFIG_DEBUG_LL))
-+ dbgu_init();
-+
-+ sama5d3_atmci_start_image(0, MASTER_CLOCK, 0);
-+}
-+
-+extern char __dtb_z_at91_microchip_sama5d3_eds_start[];
-+
-+SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds, r4)
-+{
-+ void *fdt;
-+
-+ if (IS_ENABLED(CONFIG_DEBUG_LL))
-+ dbgu_init();
-+
-+ fdt = __dtb_z_at91_microchip_sama5d3_eds_start + get_runtime_offset();
-+
-+ sama5d3_barebox_entry(r4, fdt);
-+}
-diff --git a/arch/arm/configs/at91_multi_defconfig b/arch/arm/configs/at91_multi_defconfig
-index c93c2f578609..de47af3bd0a6 100644
---- a/arch/arm/configs/at91_multi_defconfig
-+++ b/arch/arm/configs/at91_multi_defconfig
-@@ -4,6 +4,7 @@ CONFIG_MACH_SKOV_ARM9CPU=y
- CONFIG_MACH_AT91SAM9263EK=y
- CONFIG_MACH_AT91SAM9X5EK=y
- CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
-+CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
- CONFIG_MACH_SAMA5D3_XPLAINED=y
- CONFIG_MACH_SAMA5D27_SOM1=y
- CONFIG_MACH_SAMA5D27_GIANTBOARD=y
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 98f4c4e0194b..eb9e0e062adf 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -193,6 +193,7 @@ lwl-$(CONFIG_MACH_AC_SXB) += ac-sxb.dtb.o
- lwl-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
- lwl-$(CONFIG_MACH_SAMA5D3_XPLAINED) += at91-sama5d3_xplained.dtb.o
- lwl-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
-+lwl-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += at91-microchip-sama5d3-eds.dtb.o
- lwl-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
- lwl-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
- lwl-$(CONFIG_MACH_SAMA5D4_WIFX) += at91-sama5d4_wifx_l1.dtb.o
-diff --git a/arch/arm/dts/at91-microchip-sama5d3-eds.dts b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
-new file mode 100644
-index 000000000000..ad75fc882c63
---- /dev/null
-+++ b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
-@@ -0,0 +1,14 @@
-+/* SPDX-License-Identifier: GPL-2.0 */
-+/dts-v1/;
-+#include <arm/at91-sama5d3_eds.dts>
-+#include "sama5d3.dtsi"
-+
-+/ {
-+ chosen {
-+ environment {
-+ compatible = "barebox,environment";
-+ device-path = &mmc0, "partname:0";
-+ file-path = "barebox.env";
-+ };
-+ };
-+};
-diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
-index 349586b68339..d2499747252d 100644
---- a/arch/arm/mach-at91/Kconfig
-+++ b/arch/arm/mach-at91/Kconfig
-@@ -606,6 +606,16 @@ config MACH_MICROCHIP_KSZ9477_EVB
- help
- Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
-
-+config MACH_MICROCHIP_SAMA5D3_EDS
-+ bool "Microchip SAMA5D3 Ethernet Development System"
-+ select SOC_SAMA5D3
-+ select OFDEVICE
-+ select MCI_ATMEL_PBL
-+ select COMMON_CLK_OF_PROVIDER
-+ help
-+ Select this if you are using Microchip's SAMA5D3 Ethernet Development
-+ System.
-+
- config MACH_SAMA5D3_XPLAINED
- bool "Atmel SAMA5D3_XPLAINED Evaluation Kit"
- select SOC_SAMA5D3
-diff --git a/images/Makefile.at91 b/images/Makefile.at91
-index 19a81e2e9a3c..36f725940639 100644
---- a/images/Makefile.at91
-+++ b/images/Makefile.at91
-@@ -20,6 +20,15 @@ MAX_PBL_IMAGE_SIZE_start_sama5d3_xplained_ung8071_xload_mmc = 0xffff
- FILE_barebox-microchip-ksz9477-evb-xload-mmc.img = start_sama5d3_xplained_ung8071_xload_mmc.pblb
- image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-xload-mmc.img
-
-+pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds
-+FILE_barebox-microchip-sama5d3-eds.img = start_microchip_sama5d3_eds.pblb
-+image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds.img
-+
-+pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds_xload_mmc
-+MAX_PBL_IMAGE_SIZE_start_microchip_sama5d3_eds_xload_mmc = 0xffff
-+FILE_barebox-microchip-sama5d3-eds-xload-mmc.img = start_microchip_sama5d3_eds_xload_mmc.pblb
-+image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds-xload-mmc.img
-+
- pblb-$(CONFIG_MACH_SAMA5D3_XPLAINED) += start_sama5d3_xplained
- FILE_barebox-sama5d3-xplained.img = start_sama5d3_xplained.pblb
- image-$(CONFIG_MACH_SAMA5D3_XPLAINED) += barebox-sama5d3-xplained.img
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
deleted file mode 100644
index 519ea4ace1a7..000000000000
--- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From: Oleksij Rempel <o.rempel@pengutronix.de>
-Date: Thu, 6 Jul 2023 09:26:22 +0200
-Subject: [PATCH] ARM: at91: microchip-ksz9477-evb: migrate to
- sama5d3_barebox_entry()
-
-We have sama5d3_barebox_entry(), so make use of it.
-
-Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
----
- arch/arm/boards/microchip-ksz9477-evb/lowlevel.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
-index bda6a94160a5..aa2161daeef0 100644
---- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
-+++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
-@@ -58,5 +58,5 @@ SAMA5D3_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r4)
-
- fdt = __dtb_z_at91_microchip_ksz9477_evb_start + get_runtime_offset();
-
-- barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt);
-+ sama5d3_barebox_entry(r4, fdt);
- }
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
deleted file mode 100644
index d6e6193a9fde..000000000000
--- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From: Oleksij Rempel <o.rempel@pengutronix.de>
-Date: Thu, 6 Jul 2023 11:03:50 +0200
-Subject: [PATCH] Release
- 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
-
----
- Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/Makefile b/Makefile
-index 92b5c6779a52..323f757908bc 100644
---- a/Makefile
-+++ b/Makefile
-@@ -2,7 +2,7 @@
- VERSION = 2023
- PATCHLEVEL = 07
- SUBLEVEL = 1
--EXTRAVERSION =
-+EXTRAVERSION =-20230706-1
- NAME = None
-
- # *DOCUMENTATION*
diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
deleted file mode 100644
index bdd8894835ae..000000000000
--- a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
+++ /dev/null
@@ -1,13 +0,0 @@
-# umpf-base: v2023.07.1
-# umpf-name: 2023.07.0/customers/pengutronix/distrokit-sama5d3
-# umpf-version: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
-# umpf-topic: v2023.07.0/topic/microchip-sama5d3-ether-dev-sys
-# umpf-hashinfo: 8a1d1b8e7204ee57b743ae7f1325d5729104425e
-# umpf-topic-range: 0186c17838e655dbf6a3bcd01fa74821d5e67ae6..b2883ce6100ca0f8259a1726bf53387e6da04a99
-0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
-0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
-0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
-# umpf-release: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
-# umpf-topic-range: b2883ce6100ca0f8259a1726bf53387e6da04a99..eaaffd9164ab19a152d00c6d5f8f91cd07e5ec48
-0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
-# umpf-end
diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig
index d600f7c84534..9aec8b079cc5 100644
--- a/configs/platform-v7a_noneon/platformconfig
+++ b/configs/platform-v7a_noneon/platformconfig
@@ -179,8 +179,8 @@ PTXCONF_CONSOLE_SPEED="115200"
# PTXCONF_AT91BOOTSTRAP2 is not set
PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
PTXCONF_BAREBOX_COMMON=y
-PTXCONF_BAREBOX_COMMON_VERSION="2023.07.1"
-PTXCONF_BAREBOX_COMMON_MD5="0b7ea966cd01266a93a4ccfa7d68bce0"
+PTXCONF_BAREBOX_COMMON_VERSION="2024.07.0"
+PTXCONF_BAREBOX_COMMON_MD5="c82948dfe7fba729e9d7eaaeff45f863"
PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
PTXCONF_BAREBOX_AT91=y
PTXCONF_BAREBOX_VEXPRESS=y
--
2.39.2
next prev parent reply other threads:[~2024-08-14 9:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-14 9:32 [DistroKit] [RESEND][PATCH v1 0/6] v7a_noneon: barebox update Roland Hieber
2024-08-14 9:32 ` Roland Hieber [this message]
2024-08-14 9:32 ` [DistroKit] [RESEND][PATCH v1 2/6] v7a_noneon: barebox: don't activate all consoles by default Roland Hieber
2024-08-14 9:32 ` [DistroKit] [RESEND][PATCH v1 3/6] v7a_noneon: barebox: use ARM-optimized routines where appropriate Roland Hieber
2024-08-14 9:32 ` [DistroKit] [RESEND][PATCH v1 4/6] v7a_noneon: barebox: enable of_diff command Roland Hieber
2024-08-14 9:32 ` [DistroKit] [RESEND][PATCH v1 5/6] v7a_noneon: generate vexpress.norimg by default Roland Hieber
2024-08-14 9:32 ` [DistroKit] [RESEND][PATCH v1 6/6] v7a_noneon: run: really constrain the forwarded SSH port to <= 64000 Roland Hieber
2024-08-14 10:03 ` [DistroKit] [RESEND][PATCH v1 0/6] v7a_noneon: barebox update Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240814093207.606528-2-rhi@pengutronix.de \
--to=rhi@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox