From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH v2] v7a: barebox update 2020.09.0 -> 2021.02.0
Date: Fri, 12 Mar 2021 15:03:26 +0100 [thread overview]
Message-ID: <3d17e219-7097-674e-47f2-93e69225f334@pengutronix.de> (raw)
In-Reply-To: <20210312134753.814101-1-u.kleine-koenig@pengutronix.de>
Hello Uwe,
On 12.03.21 14:47, Uwe Kleine-König wrote:
> One new patch is required to fix a regression for USB on rpi3. Also USB
> on rpi3 requires CONFIG_USB_NOP_XCEIV=y now which is enabled in the rpi2
> config now.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Thanks :-)
> ---
> Hello Robert,
>
> Ahmad tested my update on beaglebone and pointed out to more patches to
> add to the barebox patchstack. All three patches in this series were
> already sent to the barebox list. Can you please replace the commit that
> is currently 619f18c57d1aa1eac308f84137d1d2a8d98c53cf in next by this
> one?
>
> Best regards and thanks
> Uwe
>
> .../platform-v7a/barebox-am335x-mlo.config | 17 ++++----
> configs/platform-v7a/barebox-am335x.config | 24 +++++------
> .../platform-v7a/barebox-am335x.config.diff | 16 ++------
> configs/platform-v7a/barebox-at91.config | 13 +++++-
> configs/platform-v7a/barebox-at91.config.diff | 4 +-
> configs/platform-v7a/barebox-mx6.config | 29 ++++++++------
> configs/platform-v7a/barebox-mx6.config.diff | 20 ++++------
> configs/platform-v7a/barebox-rpi2.config | 16 +++++++-
> configs/platform-v7a/barebox-rpi2.config.diff | 5 ++-
> configs/platform-v7a/barebox-stm32mp.config | 15 ++++++-
> .../platform-v7a/barebox-stm32mp.config.diff | 6 +--
> configs/platform-v7a/barebox-vexpress.config | 12 +++++-
> .../platform-v7a/barebox-vexpress.config.diff | 4 +-
> configs/platform-v7a/barebox.config | 12 +++++-
> configs/platform-v7a/kernelconfig | 10 +++++
> .../bcm283X-Select-OF-clock-providers.patch | 30 ++++++++++++++
> .../net-phy-fix-waiting-for-link.patch | 35 ++++++++++++++++
> ...probe-simple-pm-bus-children-as-well.patch | 40 +++++++++++++++++++
> .../patches/barebox-2021.02.0/series | 6 +++
> configs/platform-v7a/platformconfig | 4 +-
> .../platform-v7a/rules/barebox-stm32mp.make | 2 +-
> .../rules/image-stm32mp157c-dk2.make | 2 +-
> configs/platform-v7a/run | 2 +-
> 23 files changed, 245 insertions(+), 79 deletions(-)
> create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
> create mode 100644 configs/platform-v7a/patches/barebox-2021.02.0/series
>
> diff --git a/configs/platform-v7a/barebox-am335x-mlo.config b/configs/platform-v7a/barebox-am335x-mlo.config
> index 022d53c045e4..618d8e77bb3a 100644
> --- a/configs/platform-v7a/barebox-am335x-mlo.config
> +++ b/configs/platform-v7a/barebox-am335x-mlo.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> @@ -187,6 +187,9 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -248,18 +251,11 @@ CONFIG_MTD_M25P80=y
>
> # CONFIG_DRIVER_CFI is not set
> CONFIG_NAND=y
> -# CONFIG_NAND_ECC_SOFT is not set
> -# CONFIG_NAND_ECC_BCH is not set
> -CONFIG_NAND_ECC_HW=y
> -# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
> +# CONFIG_MTD_NAND_ECC_SOFT is not set
> # CONFIG_NAND_ECC_HW_SYNDROME is not set
> -# CONFIG_NAND_ECC_HW_NONE is not set
> -# CONFIG_NAND_INFO is not set
> -# CONFIG_NAND_BBT is not set
> CONFIG_NAND_OMAP_GPMC=y
> # CONFIG_MTD_NAND_OMAP_ELM is not set
> -# CONFIG_MTD_NAND_ECC_SMC is not set
> -CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> # CONFIG_MTD_NAND_DENALI is not set
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> @@ -290,6 +286,7 @@ CONFIG_MCI=y
> # CONFIG_MCI_STARTUP is not set
> # CONFIG_MCI_WRITE is not set
> # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
> index a43071027572..d959c499b75a 100644
> --- a/configs/platform-v7a/barebox-am335x.config
> +++ b/configs/platform-v7a/barebox-am335x.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -213,6 +213,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -238,6 +239,9 @@ CONFIG_DEBUG_OMAP_UART_PORT=1
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -267,6 +271,7 @@ CONFIG_CMD_VERSION=y
> CONFIG_CMD_MMC=y
> # CONFIG_CMD_MMC_EXTCSD is not set
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -305,6 +310,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -384,6 +390,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -397,7 +404,6 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_LED=y
> CONFIG_CMD_NAND=y
> -# CONFIG_CMD_NANDTEST is not set
> # CONFIG_CMD_NAND_BITFLIP is not set
> # CONFIG_CMD_POWEROFF is not set
> CONFIG_CMD_SPI=y
> @@ -439,6 +445,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -558,20 +565,12 @@ CONFIG_MTD_M25P80=y
>
> # CONFIG_DRIVER_CFI is not set
> CONFIG_NAND=y
> -CONFIG_NAND_ECC_SOFT=y
> -# CONFIG_NAND_ECC_BCH is not set
> -CONFIG_NAND_ECC_HW=y
> -# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
> +# CONFIG_MTD_NAND_ECC_SOFT is not set
> CONFIG_NAND_ECC_HW_SYNDROME=y
> -CONFIG_NAND_ECC_HW_NONE=y
> -CONFIG_NAND_INFO=y
> -CONFIG_NAND_READ_OOB=y
> -CONFIG_NAND_BBT=y
> # CONFIG_NAND_ALLOW_ERASE_BAD is not set
> CONFIG_NAND_OMAP_GPMC=y
> # CONFIG_MTD_NAND_OMAP_ELM is not set
> -# CONFIG_MTD_NAND_ECC_SMC is not set
> -CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> # CONFIG_MTD_NAND_DENALI is not set
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> @@ -629,6 +628,7 @@ CONFIG_MCI_STARTUP=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
> index e944803f8d0b..75d489722ecf 100644
> --- a/configs/platform-v7a/barebox-am335x.config.diff
> +++ b/configs/platform-v7a/barebox-am335x.config.diff
> @@ -1,4 +1,4 @@
> -e6072dae533833bfa758a60d8e3b92b6
> +550b611f7e000b2105486cbceddb2144
> # CONFIG_AM33XX_NET_BOOT is not set
> CONFIG_ARCH_AM33XX=y
> # CONFIG_ARCH_BCM283X is not set
> @@ -22,10 +22,10 @@ CONFIG_CLOCKSOURCE_TI_DM=y
> # CONFIG_CMD_KEYSTORE is not set
> CONFIG_CMD_MIITOOL=y
> CONFIG_CMD_NAND=y
> -# CONFIG_CMD_NANDTEST is not set
> # CONFIG_CMD_NAND_BITFLIP is not set
> # CONFIG_CMD_SMC is undefined
> # CONFIG_COMMON_CLK is undefined
> +# CONFIG_COMMON_CLK_OF_PROVIDER is undefined
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_CONSOLE_ACTIVATE_NONE=y
> CONFIG_CRYPTO_KEYSTORE=y
> @@ -69,24 +69,16 @@ CONFIG_MACH_BEAGLEBONE=y
> CONFIG_MCI_OMAP_HSMMC=y
> CONFIG_MTD_M25P80=y
> # CONFIG_MTD_NAND_DENALI is not set
> -# CONFIG_MTD_NAND_ECC_SMC is not set
> -CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_ECC_SOFT is not set
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> # CONFIG_MTD_NAND_OMAP_ELM is not set
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> # CONFIG_MTD_SST25L is not set
> CONFIG_NAND=y
> # CONFIG_NAND_ALLOW_ERASE_BAD is not set
> -CONFIG_NAND_BBT=y
> -# CONFIG_NAND_ECC_BCH is not set
> -CONFIG_NAND_ECC_HW=y
> -CONFIG_NAND_ECC_HW_NONE=y
> -# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
> CONFIG_NAND_ECC_HW_SYNDROME=y
> -CONFIG_NAND_ECC_SOFT=y
> -CONFIG_NAND_INFO=y
> CONFIG_NAND_OMAP_GPMC=y
> -CONFIG_NAND_READ_OOB=y
> CONFIG_NVMEM=y
> # CONFIG_NVMEM_SNVS_LPGPR is not set
> # CONFIG_OMAP_BUILD_IFT is not set
> diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
> index 48d48fe086f4..127b79f21e47 100644
> --- a/configs/platform-v7a/barebox-at91.config
> +++ b/configs/platform-v7a/barebox-at91.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -214,6 +214,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -233,6 +234,9 @@ CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -263,6 +267,7 @@ CONFIG_CMD_VERSION=y
> # CONFIG_CMD_MMC is not set
> # CONFIG_CMD_MMC_EXTCSD is not set
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -302,6 +307,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -381,6 +387,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -431,6 +438,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -577,6 +585,7 @@ CONFIG_MCI=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> @@ -730,6 +739,8 @@ CONFIG_REGULATOR_FIXED=y
> # NVME Support
> #
> # end of NVME Support
> +
> +# CONFIG_SYSCON_REBOOT_MODE is not set
> # end of Drivers
>
> #
> diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
> index 3f636d86a633..3fa0142d83bd 100644
> --- a/configs/platform-v7a/barebox-at91.config.diff
> +++ b/configs/platform-v7a/barebox-at91.config.diff
> @@ -1,4 +1,4 @@
> -e6072dae533833bfa758a60d8e3b92b6
> +550b611f7e000b2105486cbceddb2144
> CONFIG_ARCH_AT91=y
> # CONFIG_ARCH_BCM283X is not set
> CONFIG_ARCH_TEXT_BASE=0x23f00000
> @@ -21,7 +21,6 @@ CONFIG_CMD_MENU_MANAGEMENT=y
> # CONFIG_CMD_USB is undefined
> # CONFIG_CMD_USBGADGET is undefined
> CONFIG_COMMON_CLK_AT91=y
> -CONFIG_COMMON_CLK_OF_PROVIDER=y
> CONFIG_COMPILE_LOGLEVEL=6
> CONFIG_DEBUG_AT91_UART_BASE=0xf8020000
> CONFIG_DEFAULT_COMPRESSION_BZIP2=y
> @@ -99,6 +98,7 @@ CONFIG_SOC_SAMA5D2=y
> CONFIG_SPI_ATMEL_QUADSPI=y
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> CONFIG_SPI_MEM=y
> +# CONFIG_SYSCON_REBOOT_MODE is not set
> # CONFIG_THUMB2_BAREBOX is undefined
> # CONFIG_USB is undefined
> # CONFIG_USBGADGET_START is undefined
> diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
> index 13400907e6d0..8af1a2a0fdf0 100644
> --- a/configs/platform-v7a/barebox-mx6.config
> +++ b/configs/platform-v7a/barebox-mx6.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -118,6 +118,8 @@ CONFIG_MACH_UDOO_NEO=y
> # CONFIG_MACH_PHYTEC_SOM_IMX8MQ is not set
> # CONFIG_MACH_GRINN_LITEBOARD is not set
> # CONFIG_MACH_DIGI_CCIMX6ULSBCPRO is not set
> +# CONFIG_MACH_WEBASTO_CCBV2 is not set
> +# CONFIG_MACH_MNT_REFORM is not set
>
> #
> # Board specific settings
> @@ -279,6 +281,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -304,6 +307,9 @@ CONFIG_DEBUG_IMX_UART_PORT=1
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -333,6 +339,7 @@ CONFIG_CMD_VERSION=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_MMC_EXTCSD=y
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -373,6 +380,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -454,6 +462,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -468,7 +477,6 @@ CONFIG_CMD_GPIO=y
> CONFIG_CMD_I2C=y
> CONFIG_CMD_LED=y
> CONFIG_CMD_NAND=y
> -CONFIG_CMD_NANDTEST=y
> # CONFIG_CMD_NAND_BITFLIP is not set
> # CONFIG_CMD_POWEROFF is not set
> CONFIG_CMD_SPI=y
> @@ -510,6 +518,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -634,20 +643,12 @@ CONFIG_MTD_SST25L=y
>
> # CONFIG_DRIVER_CFI is not set
> CONFIG_NAND=y
> -CONFIG_NAND_ECC_SOFT=y
> -# CONFIG_NAND_ECC_BCH is not set
> -CONFIG_NAND_ECC_HW=y
> -# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
> +# CONFIG_MTD_NAND_ECC_SOFT is not set
> CONFIG_NAND_ECC_HW_SYNDROME=y
> -CONFIG_NAND_ECC_HW_NONE=y
> -CONFIG_NAND_INFO=y
> -CONFIG_NAND_READ_OOB=y
> -CONFIG_NAND_BBT=y
> CONFIG_NAND_ALLOW_ERASE_BAD=y
> CONFIG_NAND_IMX=y
> CONFIG_NAND_MXS=y
> -# CONFIG_MTD_NAND_ECC_SMC is not set
> -CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> # CONFIG_MTD_NAND_DENALI is not set
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> @@ -714,6 +715,7 @@ CONFIG_VIDEO_VPL=y
> CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
> CONFIG_DRIVER_VIDEO_IMX_IPUV3_LVDS=y
> # CONFIG_DRIVER_VIDEO_IMX_IPUV3_PARALLEL is not set
> +# CONFIG_DRIVER_VIDEO_BOCHS_ISA is not set
> CONFIG_DRIVER_VIDEO_SIMPLEFB=y
> # CONFIG_DRIVER_VIDEO_EDID is not set
> # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
> @@ -733,6 +735,7 @@ CONFIG_MCI=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> @@ -913,6 +916,8 @@ CONFIG_USB_NOP_XCEIV=y
> # NVME Support
> #
> # end of NVME Support
> +
> +# CONFIG_SYSCON_REBOOT_MODE is not set
> # end of Drivers
>
> #
> diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
> index 3c04319ba252..58450f94a7c0 100644
> --- a/configs/platform-v7a/barebox-mx6.config.diff
> +++ b/configs/platform-v7a/barebox-mx6.config.diff
> @@ -1,4 +1,4 @@
> -e6072dae533833bfa758a60d8e3b92b6
> +550b611f7e000b2105486cbceddb2144
> # CONFIG_ARCH_BCM283X is not set
> CONFIG_ARCH_HAS_FEC_IMX=y
> CONFIG_ARCH_HAS_IMX_GPT=y
> @@ -26,13 +26,11 @@ CONFIG_CLOCKSOURCE_IMX_GPT=y
> CONFIG_CMD_MIITOOL=y
> CONFIG_CMD_MMC_EXTCSD=y
> CONFIG_CMD_NAND=y
> -CONFIG_CMD_NANDTEST=y
> # CONFIG_CMD_NAND_BITFLIP is not set
> # CONFIG_CMD_SMC is undefined
> CONFIG_CMD_SPLASH=y
> CONFIG_CMD_UBI=y
> CONFIG_CMD_UBIFORMAT=y
> -CONFIG_COMMON_CLK_OF_PROVIDER=y
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_CONSOLE_ACTIVATE_NONE=y
> CONFIG_CRYPTO_KEYSTORE=y
> @@ -52,6 +50,7 @@ CONFIG_DRIVER_SERIAL_IMX=y
> CONFIG_DRIVER_SPI_IMX=y
> CONFIG_DRIVER_SPI_IMX_2_3=y
> # CONFIG_DRIVER_VIDEO_BACKLIGHT is not set
> +# CONFIG_DRIVER_VIDEO_BOCHS_ISA is not set
> # CONFIG_DRIVER_VIDEO_EDID is not set
> # CONFIG_DRIVER_VIDEO_FB_SSD1307 is not set
> CONFIG_DRIVER_VIDEO_IMX_IPUV3=y
> @@ -115,6 +114,7 @@ CONFIG_MACH_EMBEST_RIOTBOARD=y
> # CONFIG_MACH_GW_VENTANA is not set
> # CONFIG_MACH_KINDLE_MX50 is not set
> # CONFIG_MACH_KONTRON_SAMX6I is not set
> +# CONFIG_MACH_MNT_REFORM is not set
> CONFIG_MACH_NITROGEN6=y
> # CONFIG_MACH_NXP_IMX6ULL_EVK is not set
> # CONFIG_MACH_NXP_IMX8MM_EVK is not set
> @@ -148,6 +148,7 @@ CONFIG_MACH_UDOO_NEO=y
> # CONFIG_MACH_VARISCITE_MX6 is not set
> # CONFIG_MACH_VF610_TWR is not set
> # CONFIG_MACH_WARP7 is not set
> +# CONFIG_MACH_WEBASTO_CCBV2 is not set
> # CONFIG_MACH_ZII_IMX7D_DEV is not set
> # CONFIG_MACH_ZII_IMX8MQ_DEV is not set
> # CONFIG_MACH_ZII_RDU1 is not set
> @@ -167,8 +168,8 @@ CONFIG_MTD_DATAFLASH=y
> # CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
> CONFIG_MTD_M25P80=y
> # CONFIG_MTD_NAND_DENALI is not set
> -# CONFIG_MTD_NAND_ECC_SMC is not set
> -CONFIG_MTD_NAND_IDS=y
> +# CONFIG_MTD_NAND_ECC_SOFT is not set
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> CONFIG_MTD_RAW_DEVICE=y
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> @@ -181,17 +182,9 @@ CONFIG_MTD_UBI_FASTMAP=y
> CONFIG_MXS_APBH_DMA=y
> CONFIG_NAND=y
> CONFIG_NAND_ALLOW_ERASE_BAD=y
> -CONFIG_NAND_BBT=y
> -# CONFIG_NAND_ECC_BCH is not set
> -CONFIG_NAND_ECC_HW=y
> -CONFIG_NAND_ECC_HW_NONE=y
> -# CONFIG_NAND_ECC_HW_OOB_FIRST is not set
> CONFIG_NAND_ECC_HW_SYNDROME=y
> -CONFIG_NAND_ECC_SOFT=y
> CONFIG_NAND_IMX=y
> -CONFIG_NAND_INFO=y
> CONFIG_NAND_MXS=y
> -CONFIG_NAND_READ_OOB=y
> CONFIG_NVMEM=y
> # CONFIG_NVMEM_SNVS_LPGPR is not set
> CONFIG_PARTITION_DISK_EFI=y
> @@ -217,6 +210,7 @@ CONFIG_RESET_IMX_SRC=y
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> CONFIG_SPI_MEM=y
> CONFIG_STMP_DEVICE=y
> +# CONFIG_SYSCON_REBOOT_MODE is not set
> CONFIG_THUMB2_BAREBOX=y
> CONFIG_UBIFORMAT=y
> CONFIG_USB_GADGET_DFU=y
> diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
> index 9e73e9ee877a..4535c2963577 100644
> --- a/configs/platform-v7a/barebox-rpi2.config
> +++ b/configs/platform-v7a/barebox-rpi2.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -202,6 +202,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -219,6 +220,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -248,6 +252,7 @@ CONFIG_CMD_VERSION=y
> CONFIG_CMD_MMC=y
> # CONFIG_CMD_MMC_EXTCSD is not set
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -286,6 +291,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -365,6 +371,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -416,6 +423,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -562,6 +570,7 @@ CONFIG_MCI=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> @@ -575,6 +584,7 @@ CONFIG_MCI_BCM283X_SDHOST=y
> CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_COMMON_CLK=y
> +CONFIG_COMMON_CLK_OF_PROVIDER=y
>
> #
> # Clocksource
> @@ -686,7 +696,9 @@ CONFIG_REGULATOR_BCM283X=y
> # CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> # end of Firmware Drivers
>
> -# CONFIG_GENERIC_PHY is not set
> +CONFIG_GENERIC_PHY=y
> +CONFIG_USB_NOP_XCEIV=y
> +# CONFIG_PHY_FSL_IMX8MQ_USB is not set
> # CONFIG_CRYPTO_HW is not set
>
> #
> diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
> index 4ca4bd22ca09..98f09156371d 100644
> --- a/configs/platform-v7a/barebox-rpi2.config.diff
> +++ b/configs/platform-v7a/barebox-rpi2.config.diff
> @@ -1,4 +1,4 @@
> -e6072dae533833bfa758a60d8e3b92b6
> +550b611f7e000b2105486cbceddb2144
> CONFIG_ARM_ASM_UNIFIED=y
> CONFIG_BOOTM_INITRD=y
> # CONFIG_CMD_I2C is undefined
> @@ -8,6 +8,7 @@ CONFIG_DRIVER_SERIAL_NS16550=y
> # CONFIG_EEPROM_93XX46 is not set
> # CONFIG_EEPROM_AT24 is undefined
> # CONFIG_FILE_LIST is undefined
> +CONFIG_GENERIC_PHY=y
> # CONFIG_GPIO_PCA953X is undefined
> # CONFIG_GPIO_PCF857X is undefined
> CONFIG_GPIO_RASPBERRYPI_EXP=y
> @@ -43,6 +44,7 @@ CONFIG_NET_NETCONSOLE=y
> CONFIG_NVMEM=y
> # CONFIG_NVMEM_SNVS_LPGPR is not set
> # CONFIG_PBL_OPTEE is undefined
> +# CONFIG_PHY_FSL_IMX8MQ_USB is not set
> CONFIG_PINCTRL_BCM283X=y
> CONFIG_PROMPT="R-Pi> "
> CONFIG_SERIAL_AMBA_PL011=y
> @@ -58,5 +60,6 @@ CONFIG_USB_DWC2_HOST=y
> # CONFIG_USB_GADGET_FASTBOOT is undefined
> # CONFIG_USB_GADGET_SERIAL is undefined
> # CONFIG_USB_HUB_USB251XB is undefined
> +CONFIG_USB_NOP_XCEIV=y
> CONFIG_USB_OTGDEV=y
> CONFIG_WATCHDOG_BCM2835=y
> diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
> index 10df8b08857a..b64fedbd221e 100644
> --- a/configs/platform-v7a/barebox-stm32mp.config
> +++ b/configs/platform-v7a/barebox-stm32mp.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -52,7 +52,7 @@ CONFIG_CPU_32v7=y
> CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_ARCH_NR_GPIO=416
> CONFIG_ARCH_STM32MP157=y
> -CONFIG_MACH_STM32MP157C_DK2=y
> +CONFIG_MACH_STM32MP15XX_DKX=y
> CONFIG_MACH_LXA_MC1=y
> # CONFIG_MACH_SEEED_ODYSSEY is not set
> # CONFIG_BOARD_ARM_GENERIC_DT is not set
> @@ -198,6 +198,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -215,6 +216,9 @@ CONFIG_DEFAULT_LOGLEVEL=7
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -244,6 +248,7 @@ CONFIG_CMD_VERSION=y
> CONFIG_CMD_MMC=y
> CONFIG_CMD_MMC_EXTCSD=y
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -282,6 +287,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -361,6 +367,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -410,6 +417,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -524,6 +532,7 @@ CONFIG_MCI_STARTUP=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> @@ -684,6 +693,8 @@ CONFIG_RESET_STM32=y
> # NVME Support
> #
> # end of NVME Support
> +
> +# CONFIG_SYSCON_REBOOT_MODE is not set
> # end of Drivers
>
> #
> diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
> index 4b1564f9cb7a..3212fc145b9c 100644
> --- a/configs/platform-v7a/barebox-stm32mp.config.diff
> +++ b/configs/platform-v7a/barebox-stm32mp.config.diff
> @@ -1,4 +1,4 @@
> -e6072dae533833bfa758a60d8e3b92b6
> +550b611f7e000b2105486cbceddb2144
> # CONFIG_ARCH_BCM283X is not set
> CONFIG_ARCH_HAS_RESET_CONTROLLER=y
> CONFIG_ARCH_NR_GPIO=416
> @@ -30,7 +30,6 @@ CONFIG_CMD_POWEROFF=y
> # CONFIG_CMD_SPI is undefined
> # CONFIG_CMD_USB is undefined
> # CONFIG_CMD_USBGADGET is undefined
> -CONFIG_COMMON_CLK_OF_PROVIDER=y
> CONFIG_COMPILE_LOGLEVEL=6
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_CONSOLE_ACTIVATE_NONE=y
> @@ -69,7 +68,7 @@ CONFIG_MACH_LXA_MC1=y
> # CONFIG_MACH_RPI_CM3 is undefined
> # CONFIG_MACH_RPI_COMMON is undefined
> # CONFIG_MACH_SEEED_ODYSSEY is not set
> -CONFIG_MACH_STM32MP157C_DK2=y
> +CONFIG_MACH_STM32MP15XX_DKX=y
> # CONFIG_MCI_BCM283X is undefined
> # CONFIG_MCI_BCM283X_SDHOST is undefined
> # CONFIG_MCI_MMCI is not set
> @@ -126,6 +125,7 @@ CONFIG_STM32_BSEC=y
> CONFIG_STM32_IWDG_WATCHDOG=y
> CONFIG_STM32_REMOTEPROC=y
> # CONFIG_STPMIC1_WATCHDOG is not set
> +# CONFIG_SYSCON_REBOOT_MODE is not set
> CONFIG_THUMB2_BAREBOX=y
> # CONFIG_USB is undefined
> # CONFIG_USBGADGET_START is undefined
> diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
> index d50789871a8c..1765134bac45 100644
> --- a/configs/platform-v7a/barebox-vexpress.config
> +++ b/configs/platform-v7a/barebox-vexpress.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -51,6 +51,7 @@ CONFIG_CPU_32v7=y
> CONFIG_ARCH_TEXT_BASE=0x0
> CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_MACH_VEXPRESS=y
> +# CONFIG_MACH_VIRT is not set
> CONFIG_BOARD_ARM_GENERIC_DT=y
> CONFIG_AEABI=y
> # CONFIG_THUMB2_BAREBOX is not set
> @@ -190,6 +191,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -208,6 +210,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -237,6 +242,7 @@ CONFIG_CMD_VERSION=y
> CONFIG_CMD_MMC=y
> # CONFIG_CMD_MMC_EXTCSD is not set
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -275,6 +281,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -354,6 +361,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -405,6 +413,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -571,6 +580,7 @@ CONFIG_MCI_STARTUP=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
> index ac5b99af308f..211256bd7d71 100644
> --- a/configs/platform-v7a/barebox-vexpress.config.diff
> +++ b/configs/platform-v7a/barebox-vexpress.config.diff
> @@ -1,4 +1,4 @@
> -e6072dae533833bfa758a60d8e3b92b6
> +550b611f7e000b2105486cbceddb2144
> CONFIG_AMBA_SP804=y
> # CONFIG_ARCH_BCM283X is not set
> CONFIG_ARCH_VEXPRESS=y
> @@ -9,7 +9,6 @@ CONFIG_BOOTM_INITRD=y
> # CONFIG_CLOCKSOURCE_BCM283X is undefined
> # CONFIG_CMD_GPIO is undefined
> # CONFIG_CMD_SMC is undefined
> -CONFIG_COMMON_CLK_OF_PROVIDER=y
> CONFIG_CONSOLE_ACTIVATE_ALL=y
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_DRIVER_CFI=y
> @@ -47,6 +46,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_MACH_RPI_CM3 is undefined
> # CONFIG_MACH_RPI_COMMON is undefined
> CONFIG_MACH_VEXPRESS=y
> +# CONFIG_MACH_VIRT is not set
> # CONFIG_MCI_BCM283X is undefined
> # CONFIG_MCI_BCM283X_SDHOST is undefined
> # CONFIG_MDIO_BUS_MUX_GPIO is undefined
> diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
> index bbe7f3e51986..fd9da0519224 100644
> --- a/configs/platform-v7a/barebox.config
> +++ b/configs/platform-v7a/barebox.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2020.09.0 Configuration
> +# Barebox/arm 2021.02.0 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -203,6 +203,7 @@ CONFIG_STATE=y
> # CONFIG_BOOTCHOOSER is not set
> CONFIG_RESET_SOURCE=y
> # CONFIG_MACHINE_ID is not set
> +# CONFIG_SYSTEMD_OF_WATCHDOG is not set
>
> #
> # OP-TEE loading
> @@ -221,6 +222,9 @@ CONFIG_DEFAULT_LOGLEVEL=6
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_UBSAN is not set
> +CONFIG_HAVE_ARCH_KASAN=y
> +CONFIG_CC_HAS_KASAN_GENERIC=y
> +# CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> # end of Debugging
>
> @@ -250,6 +254,7 @@ CONFIG_CMD_VERSION=y
> CONFIG_CMD_MMC=y
> # CONFIG_CMD_MMC_EXTCSD is not set
> # CONFIG_CMD_POLLER is not set
> +# CONFIG_CMD_SLICE is not set
> # end of Information
>
> #
> @@ -288,6 +293,7 @@ CONFIG_CMD_PRINTENV=y
> CONFIG_CMD_MAGICVAR=y
> CONFIG_CMD_MAGICVAR_HELP=y
> CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_SETENV=y
> # end of Environment
>
> #
> @@ -367,6 +373,7 @@ CONFIG_CMD_MEMCMP=y
> CONFIG_CMD_MEMCPY=y
> CONFIG_CMD_MEMSET=y
> CONFIG_CMD_MEMTEST=y
> +# CONFIG_CMD_MEMTESTER is not set
> CONFIG_CMD_MM=y
> CONFIG_CMD_MW=y
> # end of Memory
> @@ -420,6 +427,7 @@ CONFIG_NET_RESOLV=y
> CONFIG_NET_IFUP=y
> CONFIG_NET_DHCP=y
> # CONFIG_NET_SNTP is not set
> +# CONFIG_NET_FASTBOOT is not set
>
> #
> # Drivers
> @@ -584,6 +592,7 @@ CONFIG_MCI_STARTUP=y
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> # CONFIG_MCI_MMC_BOOT_PARTITIONS is not set
> +# CONFIG_MCI_MMC_GPP_PARTITIONS is not set
>
> #
> # --- MCI host drivers ---
> @@ -597,6 +606,7 @@ CONFIG_MCI_MMCI=y
> CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_COMMON_CLK=y
> +CONFIG_COMMON_CLK_OF_PROVIDER=y
>
> #
> # Clocksource
> diff --git a/configs/platform-v7a/kernelconfig b/configs/platform-v7a/kernelconfig
> index b32a368a0a19..968a6c9b8253 100644
> --- a/configs/platform-v7a/kernelconfig
> +++ b/configs/platform-v7a/kernelconfig
> @@ -555,6 +555,7 @@ CONFIG_ALIGNMENT_TRAP=y
> # CONFIG_PARAVIRT is not set
> # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set
> # CONFIG_XEN is not set
> +CONFIG_STACKPROTECTOR_PER_TASK=y
> # end of Kernel Features
>
> #
> @@ -769,6 +770,11 @@ CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
> # end of GCOV-based kernel profiling
>
> CONFIG_HAVE_GCC_PLUGINS=y
> +CONFIG_GCC_PLUGINS=y
> +# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set
> +# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set
> +# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set
> +CONFIG_GCC_PLUGIN_ARM_SSP_PER_TASK=y
> # end of General architecture-dependent options
>
> CONFIG_RT_MUTEXES=y
> @@ -3455,6 +3461,9 @@ CONFIG_LSM="yama,loadpin,safesetid,integrity"
> # Memory initialization
> #
> CONFIG_INIT_STACK_NONE=y
> +# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set
> +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set
> +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set
> # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
> # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
> # end of Memory initialization
> @@ -3763,6 +3772,7 @@ CONFIG_DEBUG_INFO=y
> # CONFIG_DEBUG_INFO_SPLIT is not set
> # CONFIG_DEBUG_INFO_DWARF4 is not set
> # CONFIG_DEBUG_INFO_BTF is not set
> +CONFIG_PAHOLE_HAS_SPLIT_BTF=y
> # CONFIG_GDB_SCRIPTS is not set
> CONFIG_FRAME_WARN=1024
> # CONFIG_STRIP_ASM_SYMS is not set
> diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch b/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
> new file mode 100644
> index 000000000000..8b08428d8c51
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2021.02.0/bcm283X-Select-OF-clock-providers.patch
> @@ -0,0 +1,30 @@
> +From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= <u.kleine-koenig@pengutronix.de>
> +Date: Thu, 11 Mar 2021 13:10:47 +0100
> +Subject: [PATCH] bcm283X: Select OF clock providers
> +MIME-Version: 1.0
> +Content-Type: text/plain; charset=UTF-8
> +Content-Transfer-Encoding: 8bit
> +
> +This makes available the fixed clock needed on rpi3 for USB.
> +
> +USB stopped working when the dwc driver started to require an otg clock.
> +
> +Fixes: f73ca701bb85 ("usb: dwc2: add clk dependency for probe via oftree")
> +Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> +Link: https://lore.pengutronix.de/20210312133030.521569-1-u.kleine-koenig@pengutronix.de
> +---
> + arch/arm/Kconfig | 1 +
> + 1 file changed, 1 insertion(+)
> +
> +diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> +index ab0bf030131c..f9be9d42ecff 100644
> +--- a/arch/arm/Kconfig
> ++++ b/arch/arm/Kconfig
> +@@ -44,6 +44,7 @@ config ARCH_BCM283X
> + select GPIOLIB
> + select CLKDEV_LOOKUP
> + select COMMON_CLK
> ++ select COMMON_CLK_OF_PROVIDER
> + select CLOCKSOURCE_BCM283X
> + select ARM_AMBA
> + select HAS_DEBUG_LL
> diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch b/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
> new file mode 100644
> index 000000000000..cf4279860c6e
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2021.02.0/net-phy-fix-waiting-for-link.patch
> @@ -0,0 +1,35 @@
> +From: Sascha Hauer <s.hauer@pengutronix.de>
> +Date: Fri, 12 Mar 2021 11:13:09 +0100
> +Subject: [PATCH] net: phy: fix waiting for link
> +
> +phydev->adjust_link() is called only from phy_update_status() when the
> +link status changes during that function. phydev->link is also updated
> +in genphy_update_link() called from phy_wait_aneg_done(), so it can
> +happen that phydev->link changes outside of phy_update_status(), thus
> +phydev->adjust_link is never called and no link change notice is
> +printed.
> +
> +Instead of calling genphy_update_link() from phy_wait_aneg_done(), call
> +phy_update_status(). This makes sure that a link change is properly
> +noticed.
> +
> +Fixes: 8f75aa496dcb ("net: reply to ping requests")
> +Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> +Link: https://lore.pengutronix.de/20210312101309.29650-1-s.hauer@pengutronix.de
> +---
> + drivers/net/phy/phy.c | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> +index 622acbe40dd9..e8e8dad5bd25 100644
> +--- a/drivers/net/phy/phy.c
> ++++ b/drivers/net/phy/phy.c
> +@@ -571,7 +571,7 @@ int phy_wait_aneg_done(struct phy_device *phydev)
> + }
> +
> + do {
> +- genphy_update_link(phydev);
> ++ phy_update_status(phydev);
> + if (phydev->link == 1)
> + return 0;
> + } while (!is_timeout(start, PHY_AN_TIMEOUT * SECOND));
> diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch b/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
> new file mode 100644
> index 000000000000..787366640b99
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2021.02.0/of-base-probe-simple-pm-bus-children-as-well.patch
> @@ -0,0 +1,40 @@
> +From: Ahmad Fatoum <a.fatoum@pengutronix.de>
> +Date: Fri, 12 Mar 2021 08:27:46 +0100
> +Subject: [PATCH] of: base: probe simple-pm-bus children as well
> +
> +Upstream is migrating device trees like those of the am33xx to use
> +simple-pm-bus, where applicable. These are buses that reference a clock
> +or a power domain that needs to be enabled in order to use devices on it.
> +
> +As we didn't yet support this binding, this broke the Beaglebone
> +and all other am33xx board since v2021.02.0.
> +
> +Fix this by adding simple-pm-bus to the of_default_bus_match_table.
> +Note that this is only an adequate solution for when the power domain
> +and clocks referenced are already enabled prior to barebox startup.
> +
> +For all other cases, driver support must be available for the clock
> +and power domains in questions and this driver must be extended to
> +make use of them. For the am33xx, the relevant buses are powered
> +and clocked on boot up, so we leave general support to another day..
> +
> +Fixes: 6ea3de1b8ce7 ("dts: update to v5.11-rc1")
> +Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> +Link: https://lore.pengutronix.de/20210312082218.17058-1-a.fatoum@pengutronix.de
> +---
> + drivers/of/base.c | 2 ++
> + 1 file changed, 2 insertions(+)
> +
> +diff --git a/drivers/of/base.c b/drivers/of/base.c
> +index 8759099d7480..6fe02649ee53 100644
> +--- a/drivers/of/base.c
> ++++ b/drivers/of/base.c
> +@@ -2272,6 +2272,8 @@ const char *of_get_model(void)
> + const struct of_device_id of_default_bus_match_table[] = {
> + {
> + .compatible = "simple-bus",
> ++ }, {
> ++ .compatible = "simple-pm-bus",
> + }, {
> + .compatible = "simple-mfd",
> + }, {
> diff --git a/configs/platform-v7a/patches/barebox-2021.02.0/series b/configs/platform-v7a/patches/barebox-2021.02.0/series
> new file mode 100644
> index 000000000000..0654fa5ec638
> --- /dev/null
> +++ b/configs/platform-v7a/patches/barebox-2021.02.0/series
> @@ -0,0 +1,6 @@
> +# generated by git-ptx-patches
> +#tag:base --start-number 1
> +of-base-probe-simple-pm-bus-children-as-well.patch
> +net-phy-fix-waiting-for-link.patch
> +bcm283X-Select-OF-clock-providers.patch
> +# ad5056773d1eb319e6b321f55c67cc0c - git-ptx-patches magic
> diff --git a/configs/platform-v7a/platformconfig b/configs/platform-v7a/platformconfig
> index 9145bb8e4a08..2ef8b8e87b61 100644
> --- a/configs/platform-v7a/platformconfig
> +++ b/configs/platform-v7a/platformconfig
> @@ -176,8 +176,8 @@ PTXCONF_CONSOLE_SPEED="115200"
> # PTXCONF_AT91BOOTSTRAP2 is not set
> PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
> PTXCONF_BAREBOX_COMMON=y
> -PTXCONF_BAREBOX_COMMON_VERSION="2020.09.0"
> -PTXCONF_BAREBOX_COMMON_MD5="907dc813298fcded06fa9c788d3fb6c8"
> +PTXCONF_BAREBOX_COMMON_VERSION="2021.02.0"
> +PTXCONF_BAREBOX_COMMON_MD5="07045e34faa1135d9cd18503186b2d7f"
> PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
> PTXCONF_BAREBOX_AM335X_MLO=y
> PTXCONF_BAREBOX_AM335X=y
> diff --git a/configs/platform-v7a/rules/barebox-stm32mp.make b/configs/platform-v7a/rules/barebox-stm32mp.make
> index 82a3c3178f66..2ad1fa4d02b6 100644
> --- a/configs/platform-v7a/rules/barebox-stm32mp.make
> +++ b/configs/platform-v7a/rules/barebox-stm32mp.make
> @@ -43,7 +43,7 @@ BAREBOX_STM32MP_MAKE_ENV := $(BAREBOX_STM32MP_CONF_ENV)
> BAREBOX_STM32MP_MAKE_OPT := $(BAREBOX_STM32MP_CONF_OPT)
>
> BAREBOX_STM32MP_IMAGES := \
> - images/barebox-stm32mp157c-dk2.img \
> + images/barebox-stm32mp15xx-dkx.img \
> images/barebox-stm32mp157c-lxa-mc1.img
>
> BAREBOX_STM32MP_IMAGES := $(addprefix $(BAREBOX_STM32MP_DIR)/,$(BAREBOX_STM32MP_IMAGES))
> diff --git a/configs/platform-v7a/rules/image-stm32mp157c-dk2.make b/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
> index 2c739d388c93..7c0f4424936a 100644
> --- a/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
> +++ b/configs/platform-v7a/rules/image-stm32mp157c-dk2.make
> @@ -13,7 +13,7 @@ IMAGE_PACKAGES-$(PTXCONF_IMAGE_STM32MP157C_DK2) += image-stm32mp157c-dk2
>
> IMAGE_STM32MP157C_DK2_ENV := \
> STM32MP_BOARD_FSBL=stm32mp157c-dk2 \
> - STM32MP_BOARD_SSBL=stm32mp157c-dk2
> + STM32MP_BOARD_SSBL=stm32mp15xx-dkx
>
> #
> # Paths and names
> diff --git a/configs/platform-v7a/run b/configs/platform-v7a/run
> index 1dc4fd645d88..65fa068e3bac 100755
> --- a/configs/platform-v7a/run
> +++ b/configs/platform-v7a/run
> @@ -65,7 +65,7 @@ if [ -z "${QEMU_NET}" ]; then
> QEMU_NET=(-netdev user,id=net1,hostfwd=tcp:127.0.0.1:${TELNET_EXTERNAL_PORT}-:${TELNET_INTERNAL_PORT},hostfwd=tcp:127.0.0.1:${SSH_EXTERNAL_PORT}-:${SSH_INTERNAL_PORT} )
> fi
>
> -BASE_CMDLINE="console=ttyAMA0,115200 loglevel=5 systemd.log_level=warning systemd.show_status=auto"
> +BASE_CMDLINE="console=ttyAMA0,115200 systemd.show_status=auto"
>
> if [ -d "${PTXDIST_PLATFORMDIR}/root/.virtfs_metadata" ]; then
> security_model="mapped-file"
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
DistroKit mailing list
DistroKit@pengutronix.de
next prev parent reply other threads:[~2021-03-12 14:03 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-12 13:47 Uwe Kleine-König
2021-03-12 14:03 ` Ahmad Fatoum [this message]
2021-03-12 18:52 ` Robert Schwebel
2021-03-13 10:48 ` Michael Olbrich
2021-03-13 13:17 ` Robert Schwebel
2021-03-13 13:41 ` Michael Olbrich
2021-03-15 9:16 ` Robert Schwebel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=3d17e219-7097-674e-47f2-93e69225f334@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox