DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Alexander Dahl <ada@thorsis.com>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH 5/9] platform: v8a: firmware-imx: Install more files for i.MX93
Date: Mon, 27 May 2024 18:15:02 +0200	[thread overview]
Message-ID: <ZlSxhhHSfCh5g4cI@pengutronix.de> (raw)
In-Reply-To: <20240425080303.171897-6-ada@thorsis.com>

applied to next

On Thu, Apr 25, 2024 at 10:02:58AM +0200, Alexander Dahl wrote:
> U-Boot builds for some i.MX93 boards (like Ka-Ro QS93-5210 SoM) require
> different files than barebox.
> 
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
>  configs/platform-v8a/platformconfig            | 1 +
>  configs/platform-v8a/platforms/firmware-imx.in | 8 +++++++-
>  configs/platform-v8a/rules/firmware-imx.make   | 7 +++++++
>  3 files changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
> index 664ed1b..65c767a 100644
> --- a/configs/platform-v8a/platformconfig
> +++ b/configs/platform-v8a/platformconfig
> @@ -356,6 +356,7 @@ PTXCONF_FIRMWARE_IMX=y
>  # PTXCONF_FIRMWARE_IMX_VPU_IMX6DL is not set
>  # PTXCONF_FIRMWARE_IMX_VPU_IMX6Q is not set
>  PTXCONF_FIRMWARE_IMX_BOOTIMAGE_IMX8=y
> +# PTXCONF_FIRMWARE_IMX_BOOTIMAGE_IMX9 is not set
>  PTXCONF_FIRMWARE_ROCKCHIP=y
>  # PTXCONF_FIRMWARE_ROCKCHIP_RK3566_SDRAM is not set
>  PTXCONF_FIRMWARE_ROCKCHIP_RK3568_SDRAM=y
> diff --git a/configs/platform-v8a/platforms/firmware-imx.in b/configs/platform-v8a/platforms/firmware-imx.in
> index fc89001..c93e9f8 100644
> --- a/configs/platform-v8a/platforms/firmware-imx.in
> +++ b/configs/platform-v8a/platforms/firmware-imx.in
> @@ -45,6 +45,13 @@ config FIRMWARE_IMX_BOOTIMAGE_IMX8
>  	  Install the Synopsis DDR PHY controller and Cadence HDMI TX
>  	  firmware used to build a boot image.
>  
> +config FIRMWARE_IMX_BOOTIMAGE_IMX9
> +	bool
> +	prompt "Install i.MX9 DDR PHY firmware"
> +	help
> +	  Install the Synopsis DDR PHY controller firmware used to build
> +	  a boot image.
> +
>  endif
>  
>  config BAREBOX_DEPENDENCIES
> @@ -52,4 +59,3 @@ config BAREBOX_DEPENDENCIES
>  	select FIRMWARE_IMX
>  	select FIRMWARE_IMX_BOOTIMAGE_IMX8
>  	select TF_A
> -
> diff --git a/configs/platform-v8a/rules/firmware-imx.make b/configs/platform-v8a/rules/firmware-imx.make
> index 20f102e..1cdc3ee 100644
> --- a/configs/platform-v8a/rules/firmware-imx.make
> +++ b/configs/platform-v8a/rules/firmware-imx.make
> @@ -112,6 +112,13 @@ ifdef PTXCONF_FIRMWARE_IMX_BOOTIMAGE_IMX8
>  		$(FIRMWARE_IMX_PKGDIR)/usr/lib/firmware/hdmi/cadence/$(f)$(ptx/nl))
>  endif
>  
> +ifdef PTXCONF_FIRMWARE_IMX_BOOTIMAGE_IMX9
> +	@$(foreach f, lpddr4_imem_1d_v202201.bin lpddr4_dmem_1d_v202201.bin \
> +	              lpddr4_imem_2d_v202201.bin lpddr4_dmem_2d_v202201.bin, \
> +		install -v -D -m644 $(FIRMWARE_IMX_DIR)/firmware/ddr/synopsys/$(f) \
> +		$(FIRMWARE_IMX_PKGDIR)/usr/lib/firmware/ddr/synopsys/$(f)$(ptx/nl))
> +endif
> +
>  	@$(call touch)
>  
>  # ----------------------------------------------------------------------------
> -- 
> 2.39.2
> 
> 
> 

-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |



  reply	other threads:[~2024-05-27 16:15 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-25  8:02 [DistroKit] [PATCH 0/9] platform: v8a: firmware: Rework for upper layers with different boards Alexander Dahl
2024-04-25  8:02 ` [DistroKit] [PATCH 1/9] platform: v8a: firmware-imx: Fix dependencies Alexander Dahl
2024-05-27 16:13   ` Robert Schwebel
2024-04-25  8:02 ` [DistroKit] [PATCH 2/9] platform: v8a: firmware-imx: Rework extract, install, and targetinstall Alexander Dahl
2024-05-27 16:13   ` Robert Schwebel
2024-04-25  8:02 ` [DistroKit] [PATCH 3/9] platform: v8a: firmware-imx: Version bump 8.8 -> 8.23 Alexander Dahl
2024-05-27 16:13   ` Robert Schwebel
2024-04-25  8:02 ` [DistroKit] [PATCH 4/9] platform: v8a: firmware-imx: Install more files for U-Boot Alexander Dahl
2024-05-27 16:14   ` Robert Schwebel
2024-04-25  8:02 ` [DistroKit] [PATCH 5/9] platform: v8a: firmware-imx: Install more files for i.MX93 Alexander Dahl
2024-05-27 16:15   ` Robert Schwebel [this message]
2024-04-25  8:02 ` [DistroKit] [PATCH 6/9] platform: v8a: firmware-imx: Move barebox injects to separate package Alexander Dahl
2024-04-25 12:33   ` Alexander Dahl
2024-05-27 16:15     ` Robert Schwebel
2024-05-28  6:32       ` Alexander Dahl
2024-04-25  8:03 ` [DistroKit] [PATCH 7/9] platform: v8a: firmware-rockchip: " Alexander Dahl
2024-05-27 16:16   ` Robert Schwebel
2024-04-25  8:03 ` [DistroKit] [PATCH 8/9] platform: v8a: barebox: Remove extra host prog Alexander Dahl
2024-05-27 16:16   ` Robert Schwebel
2024-05-28  6:14     ` Alexander Dahl
2024-05-28  8:23       ` Robert Schwebel
2024-04-25  8:03 ` [DistroKit] [PATCH 8/8] platform: v8a: firmware-sentinel: Add new package Alexander Dahl
2024-04-25  8:03 ` [DistroKit] [PATCH 9/9] " Alexander Dahl
2024-05-27 16:17   ` Robert Schwebel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZlSxhhHSfCh5g4cI@pengutronix.de \
    --to=r.schwebel@pengutronix.de \
    --cc=ada@thorsis.com \
    --cc=distrokit@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox