From: Robert Schwebel <r.schwebel@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH] v8a: barebox: update to v2024.07.0
Date: Fri, 12 Jul 2024 16:33:40 +0200 [thread overview]
Message-ID: <ZpE-xDtt5q9mE83H@pengutronix.de> (raw)
In-Reply-To: <20240712095256.1666220-1-a.fatoum@pengutronix.de>
Applied to next.
On Fri, Jul 12, 2024 at 11:52:56AM +0200, Ahmad Fatoum wrote:
> We already updated platform-v7a to v2024.07.0, so let's follow suit for
> the 64-bit ARM platforms as well.
>
> This release jump fixes a bug in DMA handling, which among other things,
> caused network drivers to occasionally return corrupted packet buffers
> when download TFTP payloads whose file name was of a certain length.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> configs/platform-v8a/barebox.config | 40 ++++++++++++++++++++++++-----
> configs/platform-v8a/platformconfig | 4 +--
> 2 files changed, 35 insertions(+), 9 deletions(-)
>
> diff --git a/configs/platform-v8a/barebox.config b/configs/platform-v8a/barebox.config
> index 699b4f324afa..6bbdd9224e1b 100644
> --- a/configs/platform-v8a/barebox.config
> +++ b/configs/platform-v8a/barebox.config
> @@ -1,11 +1,11 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2024.03.0 Configuration
> +# Barebox/arm 2024.07.0 Configuration
> #
> CONFIG_ARM=y
> +CONFIG_ARCH_TEXT_BASE=0x00000000
> CONFIG_ARM_LINUX=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> -CONFIG_TEXT_BASE=0x0
>
> #
> # System Type
> @@ -31,7 +31,6 @@ CONFIG_CPU_64v8=y
> # processor features
> #
> # CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> -CONFIG_ARCH_TEXT_BASE=0x0
> CONFIG_ARCH_IMX_IMXIMAGE=y
> CONFIG_USB_GADGET_DRIVER_ARC_PBL=y
> CONFIG_ARCH_IMX_ATF=y
> @@ -50,7 +49,9 @@ CONFIG_ARCH_IMX8MQ=y
> #
> # i.MX8M boards
> #
> +# CONFIG_MACH_KOENIGBAUER_ALPHAJET is not set
> # CONFIG_MACH_INNOCOMM_WB15 is not set
> +# CONFIG_MACH_KARO_QSXP_ML81 is not set
> # CONFIG_MACH_MNT_REFORM is not set
> CONFIG_MACH_NXP_IMX8MM_EVK=y
> CONFIG_MACH_NXP_IMX8MN_EVK=y
> @@ -92,9 +93,11 @@ CONFIG_ARCH_RK3568=y
> CONFIG_MACH_RK3568_EVB=y
> # CONFIG_MACH_RK3568_BPI_R2PRO is not set
> # CONFIG_MACH_PINE64_QUARTZ64 is not set
> +# CONFIG_MACH_PROTONIC_MECSBC is not set
> CONFIG_MACH_RADXA_ROCK3=y
> # CONFIG_MACH_RADXA_ROCK5 is not set
> # CONFIG_MACH_RADXA_CM3 is not set
> +# CONFIG_MACH_WOLFVISION_PF5 is not set
>
> #
> # select board features:
> @@ -161,6 +164,7 @@ CONFIG_PBL_IMAGE=y
> CONFIG_PBL_MULTI_IMAGES=y
> CONFIG_USE_COMPRESSED_DTB=y
> CONFIG_PBL_RELOCATABLE=y
> +# CONFIG_PBL_FULLY_PIC is not set
> CONFIG_IMAGE_COMPRESSION=y
> # CONFIG_IMAGE_COMPRESSION_LZ4 is not set
> # CONFIG_IMAGE_COMPRESSION_LZO is not set
> @@ -181,7 +185,9 @@ CONFIG_MALLOC_ALIGNMENT=8
> CONFIG_MALLOC_TLSF=y
> CONFIG_KALLSYMS=y
> CONFIG_RELOCATABLE=y
> +# CONFIG_PANIC_POWEROFF is not set
> # CONFIG_PANIC_HANG is not set
> +CONFIG_PANIC_RESET=y
> CONFIG_PROMPT="barebox:"
> CONFIG_BAUDRATE=115200
> CONFIG_CBSIZE=1024
> @@ -204,6 +210,7 @@ CONFIG_BOOTM_SHOW_TYPE=y
> CONFIG_BOOTM_VERBOSE=y
> CONFIG_BOOTM_INITRD=y
> CONFIG_BOOTM_OFTREE=y
> +CONFIG_BOOTM_UIMAGE=y
> CONFIG_BOOTM_OFTREE_UIMAGE=y
> # CONFIG_BOOTM_AIMAGE is not set
> # CONFIG_BOOTM_ELF is not set
> @@ -271,11 +278,12 @@ CONFIG_FASTBOOT_CMD_OEM=y
> #
> CONFIG_COMPILE_LOGLEVEL=6
> CONFIG_DEFAULT_LOGLEVEL=7
> +CONFIG_HAS_DEBUG_LL=y
> # CONFIG_DEBUG_LL is not set
> -CONFIG_ARCH_WANT_FRAME_POINTERS=y
> -CONFIG_FRAME_POINTER=y
> CONFIG_DEBUG_IMX_UART_PORT=1
> CONFIG_DEBUG_ROCKCHIP_UART_PORT=2
> +CONFIG_ARCH_WANT_FRAME_POINTERS=y
> +CONFIG_FRAME_POINTER=y
> # CONFIG_DEBUG_INITCALLS is not set
> # CONFIG_DEBUG_PBL is not set
> # CONFIG_DEBUG_PROBES is not set
> @@ -294,9 +302,10 @@ CONFIG_CC_HAS_KASAN_GENERIC=y
> #
> # EFI (Extensible Firmware Interface) Support
> #
> +CONFIG_HAVE_EFI_PAYLOAD=y
> +CONFIG_HAVE_EFI_STUB=y
> # end of EFI (Extensible Firmware Interface) Support
>
> -CONFIG_HAS_DEBUG_LL=y
> CONFIG_COMMAND_SUPPORT=y
> CONFIG_COMPILE_HASH=y
>
> @@ -351,6 +360,7 @@ CONFIG_CMD_BOOTCHOOSER=y
> CONFIG_CMD_PARTITION=y
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_MOUNT=y
> +# CONFIG_CMD_FINDMNT is not set
> CONFIG_CMD_PARTED=y
> CONFIG_CMD_UMOUNT=y
> # end of Partition
> @@ -482,6 +492,7 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> CONFIG_CMD_FIRMWARELOAD=y
> +# CONFIG_CMD_KALLSYMS is not set
> CONFIG_CMD_OF_COMPATIBLE=y
> CONFIG_CMD_OF_DIFF=y
> CONFIG_CMD_OF_DUMP=y
> @@ -656,7 +667,20 @@ CONFIG_MTD_M25P80=y
> # end of Self contained MTD devices
>
> # CONFIG_DRIVER_CFI is not set
> +
> +#
> +# NAND
> +#
> # CONFIG_NAND is not set
> +
> +#
> +# ECC engine support
> +#
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING is not set
> +# CONFIG_MTD_NAND_ECC_SW_BCH is not set
> +# end of ECC engine support
> +# end of NAND
> +
> CONFIG_MTD_SPI_NOR=y
> CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> @@ -719,6 +743,7 @@ CONFIG_MCI=y
> #
> # --- Feature list ---
> #
> +# CONFIG_MCI_TUNING is not set
> # CONFIG_MCI_STARTUP is not set
> CONFIG_MCI_INFO=y
> CONFIG_MCI_WRITE=y
> @@ -805,6 +830,7 @@ CONFIG_EEPROM_AT24=y
> #
> # Input device support
> #
> +# CONFIG_INPUT_EVBUG is not set
> # CONFIG_KEYBOARD_GPIO is not set
> # CONFIG_KEYBOARD_IMX_KEYPAD is not set
> # CONFIG_KEYBOARD_QT1070 is not set
> @@ -932,6 +958,7 @@ CONFIG_USB_NOP_XCEIV=y
> CONFIG_PHY_FSL_IMX8MQ_USB=y
> CONFIG_PHY_ROCKCHIP_INNO_USB2=y
> CONFIG_PHY_ROCKCHIP_NANENG_COMBO_PHY=y
> +# CONFIG_PHY_ROCKCHIP_SNPS_PCIE3 is not set
>
> #
> # Hardware crypto devices
> @@ -988,7 +1015,6 @@ CONFIG_IMX8M_BLK_CTRL=y
> #
> CONFIG_IMX_DRAM=y
> CONFIG_IMX8M_DRAM=y
> -# CONFIG_IMX9_DRAM is not set
> # end of i.MX DDR controllers
>
> CONFIG_REBOOT_MODE=y
> diff --git a/configs/platform-v8a/platformconfig b/configs/platform-v8a/platformconfig
> index 33c4545c66ef..f06d7cfe9bab 100644
> --- a/configs/platform-v8a/platformconfig
> +++ b/configs/platform-v8a/platformconfig
> @@ -177,10 +177,10 @@ PTXCONF_CONSOLE_SPEED="115200"
> PTXCONF_BAREBOX_ARCH_STRING="arm"
> PTXCONF_BAREBOX_DEPENDENCIES=y
> PTXCONF_BAREBOX=y
> -PTXCONF_BAREBOX_VERSION="2024.03.0"
> +PTXCONF_BAREBOX_VERSION="2024.07.0"
> PTXCONF_BAREBOX_CONFIG_BUILDSYSTEM_VERSION=y
> PTXCONF_BAREBOX_BUILDSYSTEM_VERSION="${PTXDIST_VCS_VERSION}"
> -PTXCONF_BAREBOX_MD5="dcb443c48b64662b52974502c502427e"
> +PTXCONF_BAREBOX_MD5="c82948dfe7fba729e9d7eaaeff45f863"
> PTXCONF_BAREBOX_CONFIG="barebox.config"
> PTXCONF_BAREBOX_FIRMWARE=y
> PTXCONF_BAREBOX_EXTRA_ENV=y
> --
> 2.39.2
>
>
>
--
Pengutronix e.K. | Dipl.-Ing. Robert Schwebel |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
prev parent reply other threads:[~2024-07-12 14:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-12 9:52 Ahmad Fatoum
2024-07-12 14:33 ` Robert Schwebel [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZpE-xDtt5q9mE83H@pengutronix.de \
--to=r.schwebel@pengutronix.de \
--cc=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox