Re: [DistroKit] [PATCH] fixup! doc: remove left-overs of removed platforms

[Robert Schwebel <r.schwebel@pengutronix.de>]

Applied, squashed & re-ordered.

On Mon, Mar 16, 2026 at 01:20:12PM +0100, Roland Hieber wrote:
> Some more docs were forgotten in my commit
> 
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
>  doc/hardware_mips_qemu.rst   | 17 -----------------
>  doc/hardware_mipsel_qemu.rst | 13 -------------
>  doc/hardware_rpi1_raspi1.rst | 16 ----------------
>  3 files changed, 46 deletions(-)
>  delete mode 100644 doc/hardware_mips_qemu.rst
>  delete mode 100644 doc/hardware_mipsel_qemu.rst
>  delete mode 100644 doc/hardware_rpi1_raspi1.rst
> 
> diff --git a/doc/hardware_mips_qemu.rst b/doc/hardware_mips_qemu.rst
> deleted file mode 100644
> index 91a1d314b24e..000000000000
> --- a/doc/hardware_mips_qemu.rst
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -QEmu
> -====
> -
> -The mips platform is ready to run in qemu, using the MIPS Malta board simulation.
> -
> -There are two ways to run DistroKit inside qemu:
> -
> -* With barebox:
> -  Run ``./configs/platform-mips/run barebox`` to barebox. The barebox should boot
> -  the kernel if supported.
> -* Without barebox:
> -  Run ``./configs/platform-mips/run`` to directly start the kernel without barebox.
> -
> -Maintenance Status
> -------------------
> -Automated boot tests for the qemu machine are run at PTX for the *master* and
> -*next* branches.
> diff --git a/doc/hardware_mipsel_qemu.rst b/doc/hardware_mipsel_qemu.rst
> deleted file mode 100644
> index 9805a0acef78..000000000000
> --- a/doc/hardware_mipsel_qemu.rst
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -QEmu
> -====
> -
> -The mipsel platform is ready to run in qemu, using the MIPS Malta board
> -simulation.
> -There are two ways to run DistroKit inside qemu:
> -
> -* With barebox:
> -  Run ``./configs/platform-mipsel/run barebox`` to barebox. The barebox should
> -  boot the kernel if supported.
> -* Without barebox:
> -  Run ``./configs/platform-mipsel/run`` to directly start the kernel without
> -  barebox.
> diff --git a/doc/hardware_rpi1_raspi1.rst b/doc/hardware_rpi1_raspi1.rst
> deleted file mode 100644
> index 19825d98dba7..000000000000
> --- a/doc/hardware_rpi1_raspi1.rst
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -Raspberry Pi 1 and Zero W
> -=========================
> -
> -Boot Media
> -----------
> -Use the image ``platform-rpi1/images/hd.img`` and write it onto your SD Card.
> -
> -Serial Console
> ---------------
> -The serial boot console is available at J8 (the GPIO header) with 115200
> -baud, 8N1 on the following pins:
> -
> -* J8.6: GND
> -* J8.8: Tx
> -* J8.10: Rx
> -
> -- 
> 2.47.3
> 
> 
> 

-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |