[DistroKit] [PATCH] doc: remove left-overs of removed platforms

[DistroKit] [PATCH] doc: remove left-overs of removed platforms

[Roland Hieber]

Fixes: 6b0c6a97872d3354e93a (2025-12-17, "platforms: remove rpi1")
Fixes: 4304e1820197b0954450 (2025-12-17, "platforms: remove mipsel")
Fixes: 5efb124c6eecc8b70ced (2025-12-17, "platforms: remove mips")
Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
 doc/hardware.rst | 56 ------------------------------------------------
 1 file changed, 56 deletions(-)

diff --git a/doc/hardware.rst b/doc/hardware.rst
index 09e789b4e06b..b2f8300e69e1 100644
--- a/doc/hardware.rst
+++ b/doc/hardware.rst
@@ -201,62 +201,6 @@ Currently, DistroKit supports the following hardware:
    hardware_v8a_imx93_frdm
 
 
-rpi1 Platform
--------------
-
-+-------------------------+------------------------------------------+
-| platformconfig:         | ``configs/platform-rpi1/platformconfig`` |
-+-------------------------+------------------------------------------+
-| Toolchain architecture: | ``arm-1136jfs-linux-gnueabihf``          |
-+-------------------------+------------------------------------------+
-
-.. note::
-
-  The rpi1 platform is currently not actively maintained,
-  as RPi 1 has been superseded by newer models
-  which are supported in the v7a platform.
-  However, if you are targeting a RPi 1,
-  we will be happy to merge your patches anyways.
-
-The rpi1 platform has support for the Raspberry Pi 1 and Raspberry Pi Zero W,
-which is based on the Broadcom BCM2835 SoC (ARMv6):
-
-.. toctree::
-   :maxdepth: 1
-
-   hardware_rpi1_raspi1
-
-
-mips Platform
--------------
-
-+-------------------------+------------------------------------------+
-| platformconfig:         | ``configs/platform-mips/platformconfig`` |
-+-------------------------+------------------------------------------+
-| Toolchain architecture: | ``mips-softfloat-linux-gnu``             |
-+-------------------------+------------------------------------------+
-
-.. toctree::
-   :maxdepth: 1
-
-   hardware_mips_qemu
-
-
-mips Platform
--------------
-
-+-------------------------+--------------------------------------------+
-| platformconfig:         | ``configs/platform-mipsel/platformconfig`` |
-+-------------------------+--------------------------------------------+
-| Toolchain architecture: | ``mipsel-softfloat-linux-gnu``             |
-+-------------------------+--------------------------------------------+
-
-.. toctree::
-   :maxdepth: 1
-
-   hardware_mipsel_qemu
-
-
 x86_64 Platform
 ---------------
 
-- 
2.51.0

Re: [DistroKit] [PATCH] doc: remove left-overs of removed platforms

[Robert Schwebel]

applied to next

On Wed, Feb 04, 2026 at 03:16:12PM +0100, Roland Hieber wrote:
> Fixes: 6b0c6a97872d3354e93a (2025-12-17, "platforms: remove rpi1")
> Fixes: 4304e1820197b0954450 (2025-12-17, "platforms: remove mipsel")
> Fixes: 5efb124c6eecc8b70ced (2025-12-17, "platforms: remove mips")
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
>  doc/hardware.rst | 56 ------------------------------------------------
>  1 file changed, 56 deletions(-)
> 
> diff --git a/doc/hardware.rst b/doc/hardware.rst
> index 09e789b4e06b..b2f8300e69e1 100644
> --- a/doc/hardware.rst
> +++ b/doc/hardware.rst
> @@ -201,62 +201,6 @@ Currently, DistroKit supports the following hardware:
>     hardware_v8a_imx93_frdm
>  
>  
> -rpi1 Platform
> --------------
> -
> -+-------------------------+------------------------------------------+
> -| platformconfig:         | ``configs/platform-rpi1/platformconfig`` |
> -+-------------------------+------------------------------------------+
> -| Toolchain architecture: | ``arm-1136jfs-linux-gnueabihf``          |
> -+-------------------------+------------------------------------------+
> -
> -.. note::
> -
> -  The rpi1 platform is currently not actively maintained,
> -  as RPi 1 has been superseded by newer models
> -  which are supported in the v7a platform.
> -  However, if you are targeting a RPi 1,
> -  we will be happy to merge your patches anyways.
> -
> -The rpi1 platform has support for the Raspberry Pi 1 and Raspberry Pi Zero W,
> -which is based on the Broadcom BCM2835 SoC (ARMv6):
> -
> -.. toctree::
> -   :maxdepth: 1
> -
> -   hardware_rpi1_raspi1
> -
> -
> -mips Platform
> --------------
> -
> -+-------------------------+------------------------------------------+
> -| platformconfig:         | ``configs/platform-mips/platformconfig`` |
> -+-------------------------+------------------------------------------+
> -| Toolchain architecture: | ``mips-softfloat-linux-gnu``             |
> -+-------------------------+------------------------------------------+
> -
> -.. toctree::
> -   :maxdepth: 1
> -
> -   hardware_mips_qemu
> -
> -
> -mips Platform
> --------------
> -
> -+-------------------------+--------------------------------------------+
> -| platformconfig:         | ``configs/platform-mipsel/platformconfig`` |
> -+-------------------------+--------------------------------------------+
> -| Toolchain architecture: | ``mipsel-softfloat-linux-gnu``             |
> -+-------------------------+--------------------------------------------+
> -
> -.. toctree::
> -   :maxdepth: 1
> -
> -   hardware_mipsel_qemu
> -
> -
>  x86_64 Platform
>  ---------------
>  
> -- 
> 2.51.0
> 
> 
> 

-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |

Re: [DistroKit] [PATCH] doc: remove left-overs of removed platforms

[Roland Hieber]

On Tue, Mar 10, 2026 at 05:11:56PM +0100, Robert Schwebel wrote:
> applied to next
> 
> On Wed, Feb 04, 2026 at 03:16:12PM +0100, Roland Hieber wrote:
> > Fixes: 6b0c6a97872d3354e93a (2025-12-17, "platforms: remove rpi1")
> > Fixes: 4304e1820197b0954450 (2025-12-17, "platforms: remove mipsel")
> > Fixes: 5efb124c6eecc8b70ced (2025-12-17, "platforms: remove mips")
> > Signed-off-by: Roland Hieber <rhi@pengutronix.de>

Thanks, but somehow your original commits got lost on the next branch.
The top commit was 5efb124c6eec, if you don't have that anymore in your local
Git repo, I've pushed it to
ssh://intern@intern.scm.pengutronix.de/downstream/DistroKit branch
rsc/remove-mips-mipsel-rpi1.

 - Roland

-- 
Roland Hieber, Pengutronix e.K.          | rhi@pengutronix.de          |
Steuerwalder Str. 21                     | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686         | Fax:   +49-5121-206917-5555 |

[DistroKit] [PATCH] fixup! doc: remove left-overs of removed platforms

[Roland Hieber]

Some more docs were forgotten in my commit

Signed-off-by: Roland Hieber <rhi@pengutronix.de>
---
 doc/hardware_mips_qemu.rst   | 17 -----------------
 doc/hardware_mipsel_qemu.rst | 13 -------------
 doc/hardware_rpi1_raspi1.rst | 16 ----------------
 3 files changed, 46 deletions(-)
 delete mode 100644 doc/hardware_mips_qemu.rst
 delete mode 100644 doc/hardware_mipsel_qemu.rst
 delete mode 100644 doc/hardware_rpi1_raspi1.rst

diff --git a/doc/hardware_mips_qemu.rst b/doc/hardware_mips_qemu.rst
deleted file mode 100644
index 91a1d314b24e..000000000000
--- a/doc/hardware_mips_qemu.rst
+++ /dev/null
@@ -1,17 +0,0 @@
-QEmu
-====
-
-The mips platform is ready to run in qemu, using the MIPS Malta board simulation.
-
-There are two ways to run DistroKit inside qemu:
-
-* With barebox:
-  Run ``./configs/platform-mips/run barebox`` to barebox. The barebox should boot
-  the kernel if supported.
-* Without barebox:
-  Run ``./configs/platform-mips/run`` to directly start the kernel without barebox.
-
-Maintenance Status
-------------------
-Automated boot tests for the qemu machine are run at PTX for the *master* and
-*next* branches.
diff --git a/doc/hardware_mipsel_qemu.rst b/doc/hardware_mipsel_qemu.rst
deleted file mode 100644
index 9805a0acef78..000000000000
--- a/doc/hardware_mipsel_qemu.rst
+++ /dev/null
@@ -1,13 +0,0 @@
-QEmu
-====
-
-The mipsel platform is ready to run in qemu, using the MIPS Malta board
-simulation.
-There are two ways to run DistroKit inside qemu:
-
-* With barebox:
-  Run ``./configs/platform-mipsel/run barebox`` to barebox. The barebox should
-  boot the kernel if supported.
-* Without barebox:
-  Run ``./configs/platform-mipsel/run`` to directly start the kernel without
-  barebox.
diff --git a/doc/hardware_rpi1_raspi1.rst b/doc/hardware_rpi1_raspi1.rst
deleted file mode 100644
index 19825d98dba7..000000000000
--- a/doc/hardware_rpi1_raspi1.rst
+++ /dev/null
@@ -1,16 +0,0 @@
-Raspberry Pi 1 and Zero W
-=========================
-
-Boot Media
-----------
-Use the image ``platform-rpi1/images/hd.img`` and write it onto your SD Card.
-
-Serial Console
---------------
-The serial boot console is available at J8 (the GPIO header) with 115200
-baud, 8N1 on the following pins:
-
-* J8.6: GND
-* J8.8: Tx
-* J8.10: Rx
-
-- 
2.47.3

Re: [DistroKit] [PATCH] doc: remove left-overs of removed platforms

[Robert Schwebel]

On Thu, Mar 12, 2026 at 10:20:24PM +0100, Roland Hieber wrote:
> On Tue, Mar 10, 2026 at 05:11:56PM +0100, Robert Schwebel wrote:
> > applied to next
> > 
> > On Wed, Feb 04, 2026 at 03:16:12PM +0100, Roland Hieber wrote:
> > > Fixes: 6b0c6a97872d3354e93a (2025-12-17, "platforms: remove rpi1")
> > > Fixes: 4304e1820197b0954450 (2025-12-17, "platforms: remove mipsel")
> > > Fixes: 5efb124c6eecc8b70ced (2025-12-17, "platforms: remove mips")
> > > Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> 
> Thanks, but somehow your original commits got lost on the next branch.
> The top commit was 5efb124c6eec, if you don't have that anymore in your local
> Git repo, I've pushed it to
> ssh://intern@intern.scm.pengutronix.de/downstream/DistroKit branch
> rsc/remove-mips-mipsel-rpi1.

I've re-applied the original series to next.

rsc
-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |

Re: [DistroKit] [PATCH] fixup! doc: remove left-overs of removed platforms

[Robert Schwebel]

Applied, squashed & re-ordered.

On Mon, Mar 16, 2026 at 01:20:12PM +0100, Roland Hieber wrote:
> Some more docs were forgotten in my commit
> 
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
>  doc/hardware_mips_qemu.rst   | 17 -----------------
>  doc/hardware_mipsel_qemu.rst | 13 -------------
>  doc/hardware_rpi1_raspi1.rst | 16 ----------------
>  3 files changed, 46 deletions(-)
>  delete mode 100644 doc/hardware_mips_qemu.rst
>  delete mode 100644 doc/hardware_mipsel_qemu.rst
>  delete mode 100644 doc/hardware_rpi1_raspi1.rst
> 
> diff --git a/doc/hardware_mips_qemu.rst b/doc/hardware_mips_qemu.rst
> deleted file mode 100644
> index 91a1d314b24e..000000000000
> --- a/doc/hardware_mips_qemu.rst
> +++ /dev/null
> @@ -1,17 +0,0 @@
> -QEmu
> -====
> -
> -The mips platform is ready to run in qemu, using the MIPS Malta board simulation.
> -
> -There are two ways to run DistroKit inside qemu:
> -
> -* With barebox:
> -  Run ``./configs/platform-mips/run barebox`` to barebox. The barebox should boot
> -  the kernel if supported.
> -* Without barebox:
> -  Run ``./configs/platform-mips/run`` to directly start the kernel without barebox.
> -
> -Maintenance Status
> -------------------
> -Automated boot tests for the qemu machine are run at PTX for the *master* and
> -*next* branches.
> diff --git a/doc/hardware_mipsel_qemu.rst b/doc/hardware_mipsel_qemu.rst
> deleted file mode 100644
> index 9805a0acef78..000000000000
> --- a/doc/hardware_mipsel_qemu.rst
> +++ /dev/null
> @@ -1,13 +0,0 @@
> -QEmu
> -====
> -
> -The mipsel platform is ready to run in qemu, using the MIPS Malta board
> -simulation.
> -There are two ways to run DistroKit inside qemu:
> -
> -* With barebox:
> -  Run ``./configs/platform-mipsel/run barebox`` to barebox. The barebox should
> -  boot the kernel if supported.
> -* Without barebox:
> -  Run ``./configs/platform-mipsel/run`` to directly start the kernel without
> -  barebox.
> diff --git a/doc/hardware_rpi1_raspi1.rst b/doc/hardware_rpi1_raspi1.rst
> deleted file mode 100644
> index 19825d98dba7..000000000000
> --- a/doc/hardware_rpi1_raspi1.rst
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -Raspberry Pi 1 and Zero W
> -=========================
> -
> -Boot Media
> -----------
> -Use the image ``platform-rpi1/images/hd.img`` and write it onto your SD Card.
> -
> -Serial Console
> ---------------
> -The serial boot console is available at J8 (the GPIO header) with 115200
> -baud, 8N1 on the following pins:
> -
> -* J8.6: GND
> -* J8.8: Tx
> -* J8.10: Rx
> -
> -- 
> 2.47.3
> 
> 
> 

-- 
Pengutronix e.K.                           | Dipl.-Ing. Robert Schwebel  |
Steuerwalder Str. 21                       | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-9    |