DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Johannes Zink <j.zink@pengutronix.de>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>, distrokit@pengutronix.de
Cc: patchwork-jzi@pengutronix.de
Subject: Re: [DistroKit] [PATCH 3/5] v8a: images: generate sparse images from rock3a initramfs, kernel and dtb
Date: Tue, 6 Jun 2023 17:04:01 +0200	[thread overview]
Message-ID: <b4b38edf-7217-7fe0-fd88-ab322b9e209f@pengutronix.de> (raw)
In-Reply-To: <088608ad-dad6-f6c1-0b51-415c5b508b23@pengutronix.de>

On 6/6/23 16:51, Ahmad Fatoum wrote:
> Hello Johannes,
> 
> On 06.06.23 16:47, Johannes Zink wrote:
>> On 6/6/23 16:41, Ahmad Fatoum wrote:
>>> On 06.06.23 16:31, Johannes Zink wrote:
>>>> This allows to load the images to barebox using android fastboot, since
>>>> otherwise the sparse header is missing and the image size is not
>>>> properly aligned as required by fastboot.
>>>
>>> IME fastboot just complains and transfers the files anyway. In that
>>> case building sparse images just adds complication. Did your fastboot
>>> command fail without this change?
>>>
>>
>> Uploading non-sparse images failed with an error
>>
>> Invalid sparse file format at header magic
>> error: write_sparse_skip_chunk: don't care size 45251584 is not a multiple of the block size 4096
>>
>> at the host tool, which is why I decided to use sparse images.
> 
> Can you describe how to reproduce this with a normal DistroKit build?

sure, just apply this series (or at least patch 1/5 for initrd generation), run 
ptxdist images and expose a fastboot partition on the DUT by calling

usbgadget -A /tmp/initramfs(initramfs)c

then use fastboot to upload the cpio.gz from your distrokit build dir

fastboot flash initramfs platform-v8a/images/initramfs-sparse.img

Johannes

> 
>> It saves upload time anyway, at least for the initramfs, so it's a good idea to use sparse images, anyway.
> 
> Sparse is a compression algorithm, albeit a very primitive one. Your kernel and
> initrd should already be compressed, so if you have savings from compressing
> them again with sparse, there's something wrong IMO.
> 
> The device tree is small enough that it shouldn't matter.
> 
> Cheers,
> Ahmad
> 
> 
>>
>> Johannes
>>
>>
>>>>
>>>> Signed-off-by: Johannes Zink <j.zink@pengutronix.de>
>>>> ---
>>>>    configs/platform-v8a/config/images/rock3a.config | 21 +++++++++++++++++++++
>>>>    1 file changed, 21 insertions(+)
>>>>
>>>> diff --git a/configs/platform-v8a/config/images/rock3a.config b/configs/platform-v8a/config/images/rock3a.config
>>>> index 522d82cdc9c9..cb0c7c4e575d 100644
>>>> --- a/configs/platform-v8a/config/images/rock3a.config
>>>> +++ b/configs/platform-v8a/config/images/rock3a.config
>>>> @@ -44,3 +44,24 @@ image barebox-rock3a.norimg {
>>>>            image = "barebox-rock3a.img"
>>>>        }
>>>>    }
>>>> +
>>>> +image initramfs-sparse.img {
>>>> +    android-sparse {
>>>> +        image = "root.cpio.gz"
>>>> +        block-size = 4k
>>>> +    }
>>>> +}
>>>> +
>>>> +image kernel-sparse.img {
>>>> +    android-sparse {
>>>> +        image = "linuximage"
>>>> +        block-size = 4k
>>>> +    }
>>>> +}
>>>> +
>>>> +image dtb-rock3a-sparse.img {
>>>> +    android-sparse {
>>>> +        image = "rk3568-rock-3a.dtb"
>>>> +        block-size = 4k
>>>> +    }
>>>> +}
>>>>
>>>
>>
> 

-- 
Pengutronix e.K.                | Johannes Zink                  |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |




  reply	other threads:[~2023-06-06 15:04 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-06 14:31 [DistroKit] [PATCH 0/5] enable uploading kernel, dtb and initramfs over fastboot and boot it on Rock3A Johannes Zink
2023-06-06 14:31 ` [DistroKit] [PATCH 1/5] v8a: enable initrd generation Johannes Zink
2023-06-06 14:37   ` Ahmad Fatoum
2023-06-06 14:44     ` Johannes Zink
2023-06-06 14:59       ` Jan Lübbe
2023-06-06 15:02         ` Johannes Zink
2023-06-06 14:31 ` [DistroKit] [PATCH 2/5] v8a: kernel: enable initramfs in kernel config Johannes Zink
2023-06-06 14:37   ` Ahmad Fatoum
2023-06-06 14:31 ` [DistroKit] [PATCH 3/5] v8a: images: generate sparse images from rock3a initramfs, kernel and dtb Johannes Zink
2023-06-06 14:41   ` Ahmad Fatoum
2023-06-06 14:42     ` Ahmad Fatoum
2023-06-06 14:49       ` Johannes Zink
2023-06-06 14:54         ` Ahmad Fatoum
2023-06-06 14:47     ` Johannes Zink
2023-06-06 14:51       ` Ahmad Fatoum
2023-06-06 15:04         ` Johannes Zink [this message]
2023-06-06 15:26           ` Ahmad Fatoum
2023-06-08  7:28             ` Ahmad Fatoum
2023-06-06 14:31 ` [DistroKit] [PATCH 4/5] v8a: barebox: enable loading kernel, dtb and initrd via fastboot Johannes Zink
2023-06-06 14:44   ` Ahmad Fatoum
2023-06-06 14:54     ` Johannes Zink
2023-06-08  7:36       ` Ahmad Fatoum
2023-06-09  6:26         ` Johannes Zink
2023-06-06 15:04     ` Jan Lübbe
2023-06-06 15:14       ` Johannes Zink
2023-06-06 15:16         ` Jan Lübbe
2023-06-06 14:31 ` [DistroKit] [PATCH 5/5] v8a: barebox: add a boot target for fastboot loaded image files Johannes Zink
2023-06-06 14:47   ` Ahmad Fatoum
2023-06-06 15:07     ` Jan Lübbe
2023-06-06 15:13       ` Johannes Zink
2023-06-09  9:53       ` Johannes Zink

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=b4b38edf-7217-7fe0-fd88-ab322b9e209f@pengutronix.de \
    --to=j.zink@pengutronix.de \
    --cc=a.fatoum@pengutronix.de \
    --cc=distrokit@pengutronix.de \
    --cc=patchwork-jzi@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox