From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>, distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH v1 1/5] v7a_noneon: barebox: version bump v2023.01.0 → v2023.07.1
Date: Thu, 6 Jul 2023 14:20:43 +0200 [thread overview]
Message-ID: <b54ee825-77f6-a49e-0f41-19b363b33fbe@pengutronix.de> (raw)
In-Reply-To: <20230706114434.1751248-1-o.rempel@pengutronix.de>
On 06.07.23 13:44, Oleksij Rempel wrote:
> This version updated includes some patches for the Microchip KSZ9477
> and support for the Microchip SAMA5D3 Ethernet Development System (EDS)
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> .../platform-v7a_noneon/barebox-at91.config | 66 ++++--
> .../barebox-at91.config.diff | 29 ++-
> .../barebox-vexpress.config | 69 ++++--
> .../barebox-vexpress.config.diff | 9 +-
> configs/platform-v7a_noneon/barebox.config | 74 ++++--
> ...nable-ddramc-for-sama5d3-and-sama5d4.patch | 32 +++
> ...port-for-SAMA5D3-Ethernet-Developmen.patch | 219 ++++++++++++++++++
> ...ip-ksz9477-evb-migrate-to-sama5d3_ba.patch | 23 ++
> ...0-customers-pengutronix-distrokit-sa.patch | 22 ++
> .../patches/barebox-2023.07.1/series | 13 ++
> configs/platform-v7a_noneon/platformconfig | 4 +-
> 11 files changed, 476 insertions(+), 84 deletions(-)
> create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> create mode 100644 configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
>
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
> index 9c18061..584bfae 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config
> +++ b/configs/platform-v7a_noneon/barebox-at91.config
> @@ -1,42 +1,35 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2022.05.0 Configuration
> +# Barebox/arm 2023.07.1-20230706-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> -CONFIG_HAVE_MACH_ARM_HEAD=y
> CONFIG_ARM_USE_COMPRESSED_DTB=y
> CONFIG_TEXT_BASE=0x0
>
> #
> # System Type
> #
> +# CONFIG_ARCH_MULTIARCH is not set
> CONFIG_ARCH_AT91=y
> -# CONFIG_ARCH_BCM283X is not set
> # CONFIG_ARCH_CLPS711X is not set
> # CONFIG_ARCH_DAVINCI is not set
> # CONFIG_ARCH_DIGIC is not set
> # CONFIG_ARCH_EP93XX is not set
> -# CONFIG_ARCH_IMX is not set
> # CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_MVEBU is not set
> # CONFIG_ARCH_MXS is not set
> # CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_OMAP_SINGLE is not set
> # CONFIG_ARCH_PXA is not set
> -# CONFIG_ARCH_ROCKCHIP is not set
> # CONFIG_ARCH_SOCFPGA is not set
> -# CONFIG_ARCH_S3C24xx is not set
> -# CONFIG_ARCH_S5PCxx is not set
> -# CONFIG_ARCH_S3C64xx is not set
> -# CONFIG_ARCH_STM32MP is not set
> -# CONFIG_ARCH_VERSATILE is not set
> -# CONFIG_ARCH_VEXPRESS is not set
> # CONFIG_ARCH_TEGRA is not set
> # CONFIG_ARCH_UEMD is not set
> # CONFIG_ARCH_ZYNQ is not set
> -# CONFIG_ARCH_ZYNQMP is not set
> -# CONFIG_ARCH_ARM64_VIRT is not set
> +# CONFIG_ARCH_BCM283X is not set
> +# CONFIG_ARCH_STM32MP is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +# CONFIG_ARCH_VEXPRESS is not set
>
> #
> # Processor Type
> @@ -53,10 +46,12 @@ CONFIG_HAVE_AT91_UTMI=y
> CONFIG_HAVE_AT91_USB_CLK=y
> CONFIG_COMMON_CLK_AT91=y
> CONFIG_HAVE_AT91_SMD=y
> +CONFIG_HAVE_AT91_DDRAMC=y
> CONFIG_AT91_MCI_PBL=y
> CONFIG_AT91SAM9_SMC=y
> CONFIG_HAVE_AT91SAM9_RST=y
> CONFIG_SOC_SAMA5=y
> +CONFIG_SOC_SAMA5_MULTI=y
> CONFIG_SOC_SAMA5D3=y
> CONFIG_ARCH_TEXT_BASE=0x23f00000
>
> @@ -68,19 +63,23 @@ CONFIG_AT91_MULTI_BOARDS=y
> # CONFIG_MACH_AT91SAM9263EK is not set
> # CONFIG_MACH_AT91SAM9X5EK is not set
> CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> +# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set
> # CONFIG_MACH_SAMA5D3_XPLAINED is not set
> # CONFIG_MACH_SAMA5D27_SOM1 is not set
> # CONFIG_MACH_SAMA5D27_GIANTBOARD is not set
> +# CONFIG_MACH_SAMA5D4_WIFX is not set
>
> #
> # AT91 Board Options
> #
> -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> # CONFIG_BOARD_ARM_GENERIC_DT is not set
> CONFIG_AEABI=y
> # CONFIG_ARM_BOARD_APPEND_ATAG is not set
> # end of System Type
>
> +# CONFIG_64BIT is not set
> +CONFIG_32BIT=y
> +
> #
> # ARM specific settings
> #
> @@ -97,11 +96,10 @@ CONFIG_HAS_KALLSYMS=y
> CONFIG_HAS_MODULES=y
> CONFIG_HAS_CACHE=y
> CONFIG_HAS_DMA=y
> -CONFIG_HAS_ARCH_SJLJ=y
> +CONFIG_ARCH_HAS_SJLJ=y
> CONFIG_GENERIC_GPIO=y
> CONFIG_BLOCK=y
> CONFIG_BLOCK_WRITE=y
> -CONFIG_USE_COMPRESSED_DTB=y
> CONFIG_FILETYPE=y
> CONFIG_BINFMT=y
> CONFIG_UIMAGE=y
> @@ -130,6 +128,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y
> CONFIG_HAVE_IMAGE_COMPRESSION=y
> CONFIG_PBL_IMAGE=y
> CONFIG_PBL_MULTI_IMAGES=y
> +CONFIG_USE_COMPRESSED_DTB=y
> CONFIG_PBL_RELOCATABLE=y
> CONFIG_IMAGE_COMPRESSION=y
> # CONFIG_IMAGE_COMPRESSION_LZ4 is not set
> @@ -138,7 +137,7 @@ CONFIG_IMAGE_COMPRESSION=y
> # CONFIG_IMAGE_COMPRESSION_XZKERN is not set
> CONFIG_IMAGE_COMPRESSION_NONE=y
> CONFIG_MMU=y
> -CONFIG_MMU_EARLY=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> CONFIG_STACK_SIZE=0x8000
> @@ -200,7 +199,6 @@ CONFIG_PARTITION_DISK_DOS=y
> # CONFIG_PARTITION_DISK_EFI is not set
> CONFIG_ENV_HANDLING=y
> CONFIG_DEFAULT_ENVIRONMENT=y
> -# CONFIG_DEFAULT_COMPRESSION_LZO is not set
> CONFIG_DEFAULT_COMPRESSION_NONE=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> # CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_IKCONFIG is not set
> @@ -236,6 +234,7 @@ CONFIG_DEFAULT_LOGLEVEL=6
> # CONFIG_DEBUG_LL is not set
> CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
> # CONFIG_DEBUG_INITCALLS is not set
> +# CONFIG_DEBUG_PBL is not set
> # CONFIG_DEBUG_PROBES is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_PRINTF_FULL is not set
> @@ -244,6 +243,7 @@ CONFIG_HAVE_ARCH_KASAN=y
> CONFIG_CC_HAS_KASAN_GENERIC=y
> # CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> +# CONFIG_WERROR is not set
> # end of Debugging
>
> #
> @@ -266,6 +266,7 @@ CONFIG_COMPILE_HASH=y
> CONFIG_CMD_AT91CLK=y
> CONFIG_CMD_ARM_CPUINFO=y
> CONFIG_CMD_DEVINFO=y
> +# CONFIG_CMD_DEVLOOKUP is not set
> # CONFIG_CMD_DEVUNBIND is not set
> CONFIG_CMD_DMESG=y
> CONFIG_CMD_DRVINFO=y
> @@ -337,6 +338,7 @@ CONFIG_CMD_DIRNAME=y
> CONFIG_CMD_FILETYPE=y
> CONFIG_CMD_LN=y
> CONFIG_CMD_LS=y
> +# CONFIG_CMD_STAT is not set
> CONFIG_CMD_MD5SUM=y
> CONFIG_CMD_MKDIR=y
> CONFIG_CMD_PWD=y
> @@ -427,15 +429,18 @@ CONFIG_CMD_USBGADGET=y
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> # CONFIG_CMD_FIRMWARELOAD is not set
> +# CONFIG_CMD_OF_COMPATIBLE is not set
> # CONFIG_CMD_OF_DIFF is not set
> CONFIG_CMD_OF_DUMP=y
> CONFIG_CMD_OF_NODE=y
> CONFIG_CMD_OF_PROPERTY=y
> # CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
> +# CONFIG_CMD_OF_FIXUP is not set
> # CONFIG_CMD_OF_FIXUP_STATUS is not set
> # CONFIG_CMD_OF_OVERLAY is not set
> CONFIG_CMD_OFTREE=y
> CONFIG_CMD_TIME=y
> +# CONFIG_CMD_UPTIME is not set
> # CONFIG_CMD_DHRYSTONE is not set
> # CONFIG_CMD_SPD_DECODE is not set
> # CONFIG_CMD_SEED is not set
> @@ -481,8 +486,9 @@ CONFIG_PHYLIB=y
> #
> # Network drivers
> #
> -# CONFIG_DRIVER_NET_DESIGNWARE is not set
> -# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
> +# CONFIG_DRIVER_NET_ARC_EMAC is not set
> +# CONFIG_DRIVER_NET_BCMGENET is not set
> +# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
> # CONFIG_DRIVER_NET_ENC28J60 is not set
> # CONFIG_DRIVER_NET_FSL_FMAN is not set
> # CONFIG_DRIVER_NET_KS8851_MLL is not set
> @@ -507,6 +513,7 @@ CONFIG_DRIVER_NET_MICREL=y
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> CONFIG_MICREL_PHY=y
> +# CONFIG_MOTORCOMM_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_SMSC_PHY is not set
> @@ -618,6 +625,7 @@ CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_COMMON_CLK=y
> CONFIG_COMMON_CLK_OF_PROVIDER=y
> +CONFIG_COMMON_CLK_GPIO=y
>
> #
> # Clocksource
> @@ -634,6 +642,7 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
> # CONFIG_MFD_MC13XXX is not set
> CONFIG_MFD_SYSCON=y
> # CONFIG_MFD_ATMEL_FLEXCOM is not set
> +CONFIG_MFD_ATMEL_SMC=y
> # end of Multifunction device drivers
>
> #
> @@ -685,6 +694,7 @@ CONFIG_GPIOLIB=y
> # CONFIG_GPIO_GENERIC_PLATFORM is not set
> # CONFIG_GPIO_DESIGNWARE is not set
> # CONFIG_GPIO_SIFIVE is not set
> +# CONFIG_GPIO_LATCH is not set
> # end of GPIO
>
> CONFIG_W1=y
> @@ -737,6 +747,7 @@ CONFIG_REGULATOR_FIXED=y
> # Firmware Drivers
> #
> # CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> +# CONFIG_QEMU_FW_CFG is not set
> # end of Firmware Drivers
>
> #
> @@ -746,11 +757,16 @@ CONFIG_REGULATOR_FIXED=y
> # end of FPGA Configuration Support
>
> # CONFIG_GENERIC_PHY is not set
> -# CONFIG_CRYPTO_HW is not set
> +
> +#
> +# Hardware crypto devices
> +#
> +# end of Hardware crypto devices
>
> #
> # Memory controller drivers
> #
> +CONFIG_ATMEL_EBI=y
> # end of Memory controller drivers
>
> #
> @@ -801,6 +817,7 @@ CONFIG_FS_EXT4=y
> CONFIG_FS_RAMFS=y
> CONFIG_FS_DEVFS=y
> CONFIG_FS_TFTP=y
> +CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
> CONFIG_FS_NFS=y
> CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> @@ -858,11 +875,11 @@ CONFIG_IMAGE_SPARSE=y
> #
> # end of Library gui routines
>
> -# CONFIG_BAREBOX_LOGO is not set
> -# CONFIG_NLS is not set
> +CONFIG_NLS=y
> # CONFIG_BLOBGEN is not set
> CONFIG_ARCH_HAS_STACK_DUMP=y
> CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
> +CONFIG_ARCH_HAS_ZERO_PAGE=y
> # end of Library routines
>
> #
> @@ -888,6 +905,7 @@ CONFIG_DIGEST_MD5_GENERIC=y
> # Firmware files
> #
> CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +CONFIG_MISSING_FIRMWARE_ERROR=y
> # end of Firmware files
>
> #
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
> index d4bd071..a183a3d 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
> @@ -1,16 +1,20 @@
> -503a2995018ed6b994350193b131ee59
> +1dedd85e90c7b6ae44712caf6c69913b
> CONFIG_ARCH_AT91=y
> # CONFIG_ARCH_BCM283X is not set
> +# CONFIG_ARCH_IMX is undefined
> +# CONFIG_ARCH_MULTIARCH is not set
> +# CONFIG_ARCH_OMAP_MULTI is undefined
> +# CONFIG_ARCH_ROCKCHIP is undefined
> CONFIG_ARCH_TEXT_BASE=0x23f00000
> # CONFIG_ARM_AMBA is undefined
> # CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS is not set
> # CONFIG_ARM_SCMI_PROTOCOL is undefined
> # CONFIG_ARM_SECURE_MONITOR is undefined
> # CONFIG_ARM_SMCCC is undefined
> -CONFIG_ARM_USE_COMPRESSED_DTB=y
> CONFIG_AT91SAM9_SMC=y
> CONFIG_AT91_MCI_PBL=y
> CONFIG_AT91_MULTI_BOARDS=y
> +CONFIG_ATMEL_EBI=y
> # CONFIG_BOARD_ARM_GENERIC_DT is not set
> # CONFIG_BOARD_GENERIC_DT is undefined
> CONFIG_BOOTM_OFTREE_UIMAGE=y
> @@ -49,9 +53,7 @@ CONFIG_COMPILE_LOGLEVEL=6
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> CONFIG_CONSOLE_ACTIVATE_NONE=y
> CONFIG_DEBUG_AT91_UART_BASE=0xffffee00
> -# CONFIG_DEFAULT_COMPRESSION_BZIP2 is undefined
> -# CONFIG_DEFAULT_COMPRESSION_GZIP is undefined
> -# CONFIG_DEFAULT_COMPRESSION_XZ is undefined
> +# CONFIG_DEBUG_PBL is not set
> # CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU is undefined
> # CONFIG_DIGEST_SHA1_GENERIC is not set
> CONFIG_DRIVER_NET_MACB=y
> @@ -70,14 +72,15 @@ CONFIG_DRIVER_SPI_ATMEL=y
> # CONFIG_GPIO_WATCHDOG is undefined
> CONFIG_HAS_MACB=y
> CONFIG_HAVE_AT91SAM9_RST=y
> +CONFIG_HAVE_AT91_DDRAMC=y
> CONFIG_HAVE_AT91_SMD=y
> CONFIG_HAVE_AT91_USB_CLK=y
> CONFIG_HAVE_AT91_UTMI=y
> # CONFIG_HAVE_DIGEST_SHA1 is undefined
> -CONFIG_HAVE_MACH_ARM_HEAD=y
> # CONFIG_HWRNG is not set
> # CONFIG_I2C is not set
> # CONFIG_I2C_ALGOBIT is undefined
> +# CONFIG_I2C_BCM283X is undefined
> # CONFIG_I2C_DESIGNWARE is undefined
> # CONFIG_I2C_GPIO is undefined
> # CONFIG_I2C_MUX is undefined
> @@ -93,14 +96,18 @@ CONFIG_IMD_TARGET=y
> # CONFIG_MACH_AT91SAM9263EK is not set
> # CONFIG_MACH_AT91SAM9X5EK is not set
> CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> +# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set
> # CONFIG_MACH_RPI2 is undefined
> # CONFIG_MACH_RPI3 is undefined
> +# CONFIG_MACH_RPI4 is undefined
> # CONFIG_MACH_RPI is undefined
> +# CONFIG_MACH_RPI_AARCH_32_64 is undefined
> # CONFIG_MACH_RPI_CM3 is undefined
> # CONFIG_MACH_RPI_COMMON is undefined
> # CONFIG_MACH_SAMA5D27_GIANTBOARD is not set
> # CONFIG_MACH_SAMA5D27_SOM1 is not set
> # CONFIG_MACH_SAMA5D3_XPLAINED is not set
> +# CONFIG_MACH_SAMA5D4_WIFX is not set
> # CONFIG_MACH_SKOV_ARM9CPU is not set
> CONFIG_MCI_ATMEL=y
> CONFIG_MCI_ATMEL_PBL=y
> @@ -111,20 +118,26 @@ CONFIG_MCI_ATMEL_SDHCI=y
> CONFIG_MCI_MMC_BOOT_PARTITIONS=y
> CONFIG_MCI_SDHCI=y
> # CONFIG_MCI_STARTUP is not set
> +# CONFIG_MEMTEST is undefined
> # CONFIG_MENUTREE is undefined
> # CONFIG_MFD_ACT8846 is undefined
> +CONFIG_MFD_ATMEL_SMC=y
> +# CONFIG_MFD_AXP20X_I2C is undefined
> # CONFIG_MFD_DA9053 is undefined
> # CONFIG_MFD_DA9063 is undefined
> # CONFIG_MFD_LP3972 is undefined
> # CONFIG_MFD_MC34704 is undefined
> # CONFIG_MFD_MC9SDZ60 is undefined
> +# CONFIG_MFD_RK808 is undefined
> # CONFIG_MFD_RN568PMIC is undefined
> +# CONFIG_MFD_ROHM_BD718XX is undefined
> # CONFIG_MFD_STMPE is undefined
> # CONFIG_MFD_STPMIC1 is undefined
> CONFIG_MFD_SYSCON=y
> # CONFIG_MFD_TWL4030 is undefined
> # CONFIG_MFD_TWL6030 is undefined
> CONFIG_MICREL_PHY=y
> +# CONFIG_MMUINFO is undefined
> CONFIG_MTD_M25P80=y
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> @@ -147,6 +160,7 @@ CONFIG_REGULATOR_FIXED=y
> # CONFIG_SERIAL_AMBA_PL011 is undefined
> CONFIG_SOC_SAMA5=y
> CONFIG_SOC_SAMA5D3=y
> +CONFIG_SOC_SAMA5_MULTI=y
> CONFIG_SPI_ATMEL_QUADSPI=y
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> CONFIG_SPI_MEM=y
> @@ -158,6 +172,7 @@ CONFIG_SPI_MEM=y
> # CONFIG_SYSTEMD_OF_WATCHDOG is undefined
> CONFIG_SYSTEM_PARTITIONS=y
> # CONFIG_THUMB2_BAREBOX is undefined
> +# CONFIG_TYPEC_TUSB320 is undefined
> # CONFIG_USB_DWC2_GADGET is undefined
> # CONFIG_USB_DWC2_HOST is undefined
> # CONFIG_USB_DWC3 is undefined
> @@ -167,10 +182,10 @@ CONFIG_USB_GADGET_DUALSPEED=y
> # CONFIG_USB_HOST is not set
> # CONFIG_USB_HUB_USB251XB is undefined
> # CONFIG_USB_NET_AX88179_178A is undefined
> +# CONFIG_USB_ONBOARD_HUB is undefined
> # CONFIG_USB_STORAGE is undefined
> # CONFIG_USB_ULPI is undefined
> # CONFIG_USB_XHCI is undefined
> -CONFIG_USE_COMPRESSED_DTB=y
> CONFIG_VIRTIO_MENU=y
> # CONFIG_VIRTIO_MMIO is not set
> CONFIG_W1=y
> diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
> index 2caf92d..d2b7aa6 100644
> --- a/configs/platform-v7a_noneon/barebox-vexpress.config
> +++ b/configs/platform-v7a_noneon/barebox-vexpress.config
> @@ -1,6 +1,6 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2022.05.0 Configuration
> +# Barebox/arm 2023.07.1-20230706-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> @@ -9,32 +9,29 @@ CONFIG_TEXT_BASE=0x0
> #
> # System Type
> #
> +CONFIG_ARCH_MULTIARCH=y
> # CONFIG_ARCH_AT91 is not set
> -# CONFIG_ARCH_BCM283X is not set
> # CONFIG_ARCH_CLPS711X is not set
> # CONFIG_ARCH_DAVINCI is not set
> # CONFIG_ARCH_DIGIC is not set
> # CONFIG_ARCH_EP93XX is not set
> -# CONFIG_ARCH_IMX is not set
> # CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_MVEBU is not set
> # CONFIG_ARCH_MXS is not set
> # CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_OMAP_SINGLE is not set
> # CONFIG_ARCH_PXA is not set
> -# CONFIG_ARCH_ROCKCHIP is not set
> # CONFIG_ARCH_SOCFPGA is not set
> -# CONFIG_ARCH_S3C24xx is not set
> -# CONFIG_ARCH_S5PCxx is not set
> -# CONFIG_ARCH_S3C64xx is not set
> -# CONFIG_ARCH_STM32MP is not set
> -# CONFIG_ARCH_VERSATILE is not set
> -CONFIG_ARCH_VEXPRESS=y
> # CONFIG_ARCH_TEGRA is not set
> # CONFIG_ARCH_UEMD is not set
> # CONFIG_ARCH_ZYNQ is not set
> -# CONFIG_ARCH_ZYNQMP is not set
> -# CONFIG_ARCH_ARM64_VIRT is not set
> +# CONFIG_ARCH_BCM283X is not set
> +# CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_OMAP_MULTI is not set
> +# CONFIG_ARCH_ROCKCHIP is not set
> +# CONFIG_ARCH_STM32MP is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +CONFIG_ARCH_VEXPRESS=y
>
> #
> # Processor Type
> @@ -48,7 +45,6 @@ CONFIG_CPU_32v7=y
> #
> # CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> CONFIG_ARCH_TEXT_BASE=0x0
> -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_MACH_VEXPRESS=y
> # CONFIG_MACH_VIRT is not set
> CONFIG_BOARD_ARM_GENERIC_DT=y
> @@ -57,6 +53,9 @@ CONFIG_AEABI=y
> # CONFIG_ARM_BOARD_APPEND_ATAG is not set
> # end of System Type
>
> +# CONFIG_64BIT is not set
> +CONFIG_32BIT=y
> +
> #
> # ARM specific settings
> #
> @@ -73,7 +72,7 @@ CONFIG_HAS_KALLSYMS=y
> CONFIG_HAS_MODULES=y
> CONFIG_HAS_CACHE=y
> CONFIG_HAS_DMA=y
> -CONFIG_HAS_ARCH_SJLJ=y
> +CONFIG_ARCH_HAS_SJLJ=y
> CONFIG_BLOCK=y
> CONFIG_BLOCK_WRITE=y
> CONFIG_FILETYPE=y
> @@ -93,6 +92,7 @@ CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_BANNER=y
> CONFIG_MEMINFO=y
> +CONFIG_MEMTEST=y
> CONFIG_ENVIRONMENT_VARIABLES=y
> CONFIG_GLOBALVAR=y
> CONFIG_NVVAR=y
> @@ -114,7 +114,8 @@ CONFIG_IMAGE_COMPRESSION_LZO=y
> # CONFIG_IMAGE_COMPRESSION_XZKERN is not set
> # CONFIG_IMAGE_COMPRESSION_NONE is not set
> CONFIG_MMU=y
> -CONFIG_MMU_EARLY=y
> +CONFIG_MMUINFO=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> CONFIG_STACK_SIZE=0x8000
> @@ -177,10 +178,6 @@ CONFIG_PARTITION_DISK_DOS=y
> # CONFIG_PARTITION_DISK_EFI is not set
> CONFIG_ENV_HANDLING=y
> CONFIG_DEFAULT_ENVIRONMENT=y
> -# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
> -# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set
> -# CONFIG_DEFAULT_COMPRESSION_LZO is not set
> -# CONFIG_DEFAULT_COMPRESSION_XZ is not set
> CONFIG_DEFAULT_COMPRESSION_NONE=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
> @@ -220,6 +217,7 @@ CONFIG_COMPILE_LOGLEVEL=7
> CONFIG_DEFAULT_LOGLEVEL=6
> # CONFIG_DEBUG_LL is not set
> # CONFIG_DEBUG_INITCALLS is not set
> +# CONFIG_DEBUG_PBL is not set
> # CONFIG_DEBUG_PROBES is not set
> # CONFIG_PBL_BREAK is not set
> # CONFIG_PRINTF_FULL is not set
> @@ -228,6 +226,7 @@ CONFIG_HAVE_ARCH_KASAN=y
> CONFIG_CC_HAS_KASAN_GENERIC=y
> # CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> +# CONFIG_WERROR is not set
> # end of Debugging
>
> #
> @@ -249,6 +248,7 @@ CONFIG_COMPILE_HASH=y
> # CONFIG_CMD_TUTORIAL is not set
> CONFIG_CMD_ARM_CPUINFO=y
> CONFIG_CMD_DEVINFO=y
> +# CONFIG_CMD_DEVLOOKUP is not set
> # CONFIG_CMD_DEVUNBIND is not set
> CONFIG_CMD_DMESG=y
> CONFIG_CMD_DRVINFO=y
> @@ -319,6 +319,7 @@ CONFIG_CMD_DIRNAME=y
> CONFIG_CMD_FILETYPE=y
> CONFIG_CMD_LN=y
> CONFIG_CMD_LS=y
> +# CONFIG_CMD_STAT is not set
> CONFIG_CMD_MD5SUM=y
> CONFIG_CMD_MKDIR=y
> CONFIG_CMD_PWD=y
> @@ -413,15 +414,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> # CONFIG_CMD_FIRMWARELOAD is not set
> +# CONFIG_CMD_OF_COMPATIBLE is not set
> # CONFIG_CMD_OF_DIFF is not set
> CONFIG_CMD_OF_DUMP=y
> CONFIG_CMD_OF_NODE=y
> CONFIG_CMD_OF_PROPERTY=y
> # CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
> +# CONFIG_CMD_OF_FIXUP is not set
> CONFIG_CMD_OF_FIXUP_STATUS=y
> CONFIG_CMD_OF_OVERLAY=y
> CONFIG_CMD_OFTREE=y
> CONFIG_CMD_TIME=y
> +# CONFIG_CMD_UPTIME is not set
> CONFIG_CMD_STATE=y
> # CONFIG_CMD_DHRYSTONE is not set
> # CONFIG_CMD_SPD_DECODE is not set
> @@ -468,8 +472,9 @@ CONFIG_PHYLIB=y
> #
> # Network drivers
> #
> -# CONFIG_DRIVER_NET_DESIGNWARE is not set
> -# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
> +# CONFIG_DRIVER_NET_ARC_EMAC is not set
> +# CONFIG_DRIVER_NET_BCMGENET is not set
> +# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
> # CONFIG_DRIVER_NET_ENC28J60 is not set
> # CONFIG_DRIVER_NET_FSL_FMAN is not set
> # CONFIG_DRIVER_NET_KS8851_MLL is not set
> @@ -493,6 +498,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> +# CONFIG_MOTORCOMM_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_SMSC_PHY is not set
> @@ -588,6 +594,8 @@ CONFIG_USB_STORAGE=y
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_HUB_USB251XB is not set
> +# CONFIG_USB_ONBOARD_HUB is not set
> +# CONFIG_TYPEC_TUSB320 is not set
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_AUTOSTART=y
>
> @@ -624,6 +632,7 @@ CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_COMMON_CLK=y
> CONFIG_COMMON_CLK_OF_PROVIDER=y
> +CONFIG_COMMON_CLK_GPIO=y
>
> #
> # Clocksource
> @@ -651,6 +660,9 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
> # CONFIG_MFD_STPMIC1 is not set
> # CONFIG_MFD_RN568PMIC is not set
> # CONFIG_MFD_ATMEL_FLEXCOM is not set
> +# CONFIG_MFD_RK808 is not set
> +# CONFIG_MFD_AXP20X_I2C is not set
> +# CONFIG_MFD_ROHM_BD718XX is not set
> # end of Multifunction device drivers
>
> #
> @@ -722,6 +734,7 @@ CONFIG_REGULATOR=y
> #
> # Firmware Drivers
> #
> +# CONFIG_QEMU_FW_CFG is not set
> # end of Firmware Drivers
>
> #
> @@ -731,7 +744,11 @@ CONFIG_REGULATOR=y
> # end of FPGA Configuration Support
>
> # CONFIG_GENERIC_PHY is not set
> -# CONFIG_CRYPTO_HW is not set
> +
> +#
> +# Hardware crypto devices
> +#
> +# end of Hardware crypto devices
>
> #
> # Memory controller drivers
> @@ -782,6 +799,7 @@ CONFIG_FS_EXT4=y
> CONFIG_FS_RAMFS=y
> CONFIG_FS_DEVFS=y
> CONFIG_FS_TFTP=y
> +CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
> CONFIG_FS_NFS=y
> CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> @@ -846,11 +864,11 @@ CONFIG_LIBFDT=y
> #
> # end of Library gui routines
>
> -# CONFIG_BAREBOX_LOGO is not set
> -# CONFIG_NLS is not set
> +CONFIG_NLS=y
> # CONFIG_BLOBGEN is not set
> CONFIG_ARCH_HAS_STACK_DUMP=y
> CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
> +CONFIG_ARCH_HAS_ZERO_PAGE=y
> # end of Library routines
>
> #
> @@ -877,6 +895,7 @@ CONFIG_DIGEST_SHA1_GENERIC=y
> # Firmware files
> #
> CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +CONFIG_MISSING_FIRMWARE_ERROR=y
> # end of Firmware files
>
> #
> diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> index ea72472..fff891e 100644
> --- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> @@ -1,16 +1,18 @@
> -503a2995018ed6b994350193b131ee59
> +1dedd85e90c7b6ae44712caf6c69913b
> CONFIG_AMBA_SP804=y
> # CONFIG_ARCH_BCM283X is not set
> CONFIG_ARCH_VEXPRESS=y
> # CONFIG_ARM_SCMI_PROTOCOL is undefined
> # CONFIG_ARM_SECURE_MONITOR is undefined
> # CONFIG_ARM_SMCCC is undefined
> +# CONFIG_ARM_USE_COMPRESSED_DTB is undefined
> # CONFIG_CFI_BUFFER_WRITE is not set
> # CONFIG_CLOCKSOURCE_BCM283X is undefined
> # CONFIG_CMD_GPIO is undefined
> # CONFIG_CMD_SMC is undefined
> CONFIG_CONSOLE_ACTIVATE_ALL=y
> # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
> +# CONFIG_DEBUG_PBL is not set
> CONFIG_DRIVER_CFI=y
> CONFIG_DRIVER_CFI_AMD=y
> CONFIG_DRIVER_CFI_BANK_WIDTH_1=y
> @@ -27,6 +29,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_GPIO_74XX_MMIO is undefined
> # CONFIG_GPIO_DESIGNWARE is undefined
> # CONFIG_GPIO_GENERIC_PLATFORM is undefined
> +# CONFIG_GPIO_LATCH is undefined
> # CONFIG_GPIO_PCA953X is undefined
> # CONFIG_GPIO_PCF857X is undefined
> # CONFIG_GPIO_PL061 is undefined
> @@ -35,6 +38,7 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_GPIO_SX150X is undefined
> # CONFIG_GPIO_WATCHDOG is undefined
> # CONFIG_I2C_ALGOBIT is undefined
> +# CONFIG_I2C_BCM283X is undefined
> # CONFIG_I2C_GPIO is undefined
> # CONFIG_JTAG is undefined
> # CONFIG_KEYBOARD_GPIO is undefined
> @@ -45,7 +49,9 @@ CONFIG_DRIVER_NET_SMC911X=y
> # CONFIG_LED_GPIO_RGB is undefined
> # CONFIG_MACH_RPI2 is undefined
> # CONFIG_MACH_RPI3 is undefined
> +# CONFIG_MACH_RPI4 is undefined
> # CONFIG_MACH_RPI is undefined
> +# CONFIG_MACH_RPI_AARCH_32_64 is undefined
> # CONFIG_MACH_RPI_CM3 is undefined
> # CONFIG_MACH_RPI_COMMON is undefined
> CONFIG_MACH_VEXPRESS=y
> @@ -64,4 +70,5 @@ CONFIG_PROMPT="vexpress: "
> # CONFIG_REGULATOR_FIXED is undefined
> CONFIG_SERIAL_AMBA_PL011=y
> CONFIG_SRAM=y
> +# CONFIG_USE_COMPRESSED_DTB is undefined
> # CONFIG_WATCHDOG_BCM2835 is undefined
> diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
> index 8b3a2f4..bbedcdb 100644
> --- a/configs/platform-v7a_noneon/barebox.config
> +++ b/configs/platform-v7a_noneon/barebox.config
> @@ -1,40 +1,38 @@
> #
> # Automatically generated file; DO NOT EDIT.
> -# Barebox/arm 2022.05.0 Configuration
> +# Barebox/arm 2023.07.1-20230706-1 Configuration
> #
> CONFIG_ARM=y
> CONFIG_ARM_LINUX=y
> +CONFIG_ARM_USE_COMPRESSED_DTB=y
> CONFIG_TEXT_BASE=0x0
>
> #
> # System Type
> #
> +CONFIG_ARCH_MULTIARCH=y
> # CONFIG_ARCH_AT91 is not set
> -CONFIG_ARCH_BCM283X=y
> # CONFIG_ARCH_CLPS711X is not set
> # CONFIG_ARCH_DAVINCI is not set
> # CONFIG_ARCH_DIGIC is not set
> # CONFIG_ARCH_EP93XX is not set
> -# CONFIG_ARCH_IMX is not set
> # CONFIG_ARCH_LAYERSCAPE is not set
> # CONFIG_ARCH_MVEBU is not set
> # CONFIG_ARCH_MXS is not set
> # CONFIG_ARCH_NOMADIK is not set
> -# CONFIG_ARCH_OMAP is not set
> +# CONFIG_ARCH_OMAP_SINGLE is not set
> # CONFIG_ARCH_PXA is not set
> -# CONFIG_ARCH_ROCKCHIP is not set
> # CONFIG_ARCH_SOCFPGA is not set
> -# CONFIG_ARCH_S3C24xx is not set
> -# CONFIG_ARCH_S5PCxx is not set
> -# CONFIG_ARCH_S3C64xx is not set
> -# CONFIG_ARCH_STM32MP is not set
> -# CONFIG_ARCH_VERSATILE is not set
> -# CONFIG_ARCH_VEXPRESS is not set
> # CONFIG_ARCH_TEGRA is not set
> # CONFIG_ARCH_UEMD is not set
> # CONFIG_ARCH_ZYNQ is not set
> -# CONFIG_ARCH_ZYNQMP is not set
> -# CONFIG_ARCH_ARM64_VIRT is not set
> +CONFIG_ARCH_BCM283X=y
> +# CONFIG_ARCH_IMX is not set
> +# CONFIG_ARCH_OMAP_MULTI is not set
> +# CONFIG_ARCH_ROCKCHIP is not set
> +# CONFIG_ARCH_STM32MP is not set
> +# CONFIG_ARCH_VERSATILE is not set
> +# CONFIG_ARCH_VEXPRESS is not set
>
> #
> # Processor Type
> @@ -49,6 +47,7 @@ CONFIG_CPU_32v7=y
> # CONFIG_BOOT_ENDIANNESS_SWITCH is not set
> CONFIG_ARCH_TEXT_BASE=0x0
> CONFIG_MACH_RPI_COMMON=y
> +CONFIG_MACH_RPI_AARCH_32_64=y
>
> #
> # select Broadcom BCM283X boards to be built
> @@ -57,15 +56,18 @@ CONFIG_MACH_RPI_COMMON=y
> # CONFIG_MACH_RPI2 is not set
> CONFIG_MACH_RPI3=y
> # CONFIG_MACH_RPI_CM3 is not set
> +# CONFIG_MACH_RPI4 is not set
> # end of select Broadcom BCM283X boards to be built
>
> -CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_BOARD_ARM_GENERIC_DT=y
> CONFIG_AEABI=y
> # CONFIG_THUMB2_BAREBOX is not set
> # CONFIG_ARM_BOARD_APPEND_ATAG is not set
> # end of System Type
>
> +# CONFIG_64BIT is not set
> +CONFIG_32BIT=y
> +
> #
> # ARM specific settings
> #
> @@ -84,7 +86,7 @@ CONFIG_HAS_KALLSYMS=y
> CONFIG_HAS_MODULES=y
> CONFIG_HAS_CACHE=y
> CONFIG_HAS_DMA=y
> -CONFIG_HAS_ARCH_SJLJ=y
> +CONFIG_ARCH_HAS_SJLJ=y
> CONFIG_GENERIC_GPIO=y
> CONFIG_BLOCK=y
> CONFIG_BLOCK_WRITE=y
> @@ -105,6 +107,7 @@ CONFIG_LOCALVERSION=""
> CONFIG_LOCALVERSION_AUTO=y
> CONFIG_BANNER=y
> CONFIG_MEMINFO=y
> +CONFIG_MEMTEST=y
> CONFIG_ENVIRONMENT_VARIABLES=y
> CONFIG_GLOBALVAR=y
> CONFIG_NVVAR=y
> @@ -117,6 +120,7 @@ CONFIG_HAVE_PBL_MULTI_IMAGES=y
> CONFIG_HAVE_IMAGE_COMPRESSION=y
> CONFIG_PBL_IMAGE=y
> CONFIG_PBL_MULTI_IMAGES=y
> +CONFIG_USE_COMPRESSED_DTB=y
> CONFIG_PBL_RELOCATABLE=y
> CONFIG_BOARD_GENERIC_DT=y
> CONFIG_IMAGE_COMPRESSION=y
> @@ -126,7 +130,8 @@ CONFIG_IMAGE_COMPRESSION_LZO=y
> # CONFIG_IMAGE_COMPRESSION_XZKERN is not set
> # CONFIG_IMAGE_COMPRESSION_NONE is not set
> CONFIG_MMU=y
> -CONFIG_MMU_EARLY=y
> +CONFIG_MMUINFO=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_PBL_SIZE=0xffffffff
> CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0xffffffff
> CONFIG_STACK_SIZE=0x8000
> @@ -189,10 +194,6 @@ CONFIG_PARTITION_DISK_DOS=y
> # CONFIG_PARTITION_DISK_EFI is not set
> CONFIG_ENV_HANDLING=y
> CONFIG_DEFAULT_ENVIRONMENT=y
> -# CONFIG_DEFAULT_COMPRESSION_GZIP is not set
> -# CONFIG_DEFAULT_COMPRESSION_BZIP2 is not set
> -# CONFIG_DEFAULT_COMPRESSION_LZO is not set
> -# CONFIG_DEFAULT_COMPRESSION_XZ is not set
> CONFIG_DEFAULT_COMPRESSION_NONE=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
> CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW_MENU=y
> @@ -240,6 +241,7 @@ CONFIG_HAVE_ARCH_KASAN=y
> CONFIG_CC_HAS_KASAN_GENERIC=y
> # CONFIG_KASAN is not set
> # CONFIG_COMPILE_TEST is not set
> +# CONFIG_WERROR is not set
> # end of Debugging
>
> #
> @@ -261,6 +263,7 @@ CONFIG_COMPILE_HASH=y
> # CONFIG_CMD_TUTORIAL is not set
> CONFIG_CMD_ARM_CPUINFO=y
> CONFIG_CMD_DEVINFO=y
> +# CONFIG_CMD_DEVLOOKUP is not set
> # CONFIG_CMD_DEVUNBIND is not set
> CONFIG_CMD_DMESG=y
> CONFIG_CMD_DRVINFO=y
> @@ -331,6 +334,7 @@ CONFIG_CMD_DIRNAME=y
> CONFIG_CMD_FILETYPE=y
> CONFIG_CMD_LN=y
> CONFIG_CMD_LS=y
> +# CONFIG_CMD_STAT is not set
> CONFIG_CMD_MD5SUM=y
> CONFIG_CMD_MKDIR=y
> CONFIG_CMD_PWD=y
> @@ -427,15 +431,18 @@ CONFIG_CMD_WD_DEFAULT_TIMOUT=0
> CONFIG_CMD_BAREBOX_UPDATE=y
> # CONFIG_CMD_BLOBGEN is not set
> # CONFIG_CMD_FIRMWARELOAD is not set
> +# CONFIG_CMD_OF_COMPATIBLE is not set
> # CONFIG_CMD_OF_DIFF is not set
> CONFIG_CMD_OF_DUMP=y
> CONFIG_CMD_OF_NODE=y
> CONFIG_CMD_OF_PROPERTY=y
> # CONFIG_CMD_OF_DISPLAY_TIMINGS is not set
> +# CONFIG_CMD_OF_FIXUP is not set
> CONFIG_CMD_OF_FIXUP_STATUS=y
> CONFIG_CMD_OF_OVERLAY=y
> CONFIG_CMD_OFTREE=y
> CONFIG_CMD_TIME=y
> +# CONFIG_CMD_UPTIME is not set
> CONFIG_CMD_STATE=y
> # CONFIG_CMD_DHRYSTONE is not set
> # CONFIG_CMD_SPD_DECODE is not set
> @@ -483,8 +490,9 @@ CONFIG_PHYLIB=y
> #
> # Network drivers
> #
> -# CONFIG_DRIVER_NET_DESIGNWARE is not set
> -# CONFIG_DRIVER_NET_DESIGNWARE_EQOS is not set
> +# CONFIG_DRIVER_NET_ARC_EMAC is not set
> +# CONFIG_DRIVER_NET_BCMGENET is not set
> +# CONFIG_DRIVER_NET_DESIGNWARE_GENERIC is not set
> # CONFIG_DRIVER_NET_ENC28J60 is not set
> # CONFIG_DRIVER_NET_FSL_FMAN is not set
> # CONFIG_DRIVER_NET_KS8851_MLL is not set
> @@ -508,6 +516,7 @@ CONFIG_PHYLIB=y
> # CONFIG_LXT_PHY is not set
> # CONFIG_MARVELL_PHY is not set
> # CONFIG_MICREL_PHY is not set
> +# CONFIG_MOTORCOMM_PHY is not set
> # CONFIG_NATIONAL_PHY is not set
> # CONFIG_REALTEK_PHY is not set
> # CONFIG_SMSC_PHY is not set
> @@ -544,6 +553,7 @@ CONFIG_I2C_ALGOBIT=y
> # I2C Hardware Bus support
> #
> CONFIG_I2C_GPIO=y
> +# CONFIG_I2C_BCM283X is not set
> # CONFIG_I2C_DESIGNWARE is not set
> # CONFIG_I2C_MV64XXX is not set
> # end of I2C Hardware Bus support
> @@ -600,6 +610,8 @@ CONFIG_USB_STORAGE=y
> # USB Miscellaneous drivers
> #
> # CONFIG_USB_HUB_USB251XB is not set
> +# CONFIG_USB_ONBOARD_HUB is not set
> +# CONFIG_TYPEC_TUSB320 is not set
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_AUTOSTART=y
>
> @@ -638,6 +650,7 @@ CONFIG_HAVE_CLK=y
> CONFIG_CLKDEV_LOOKUP=y
> CONFIG_COMMON_CLK=y
> CONFIG_COMMON_CLK_OF_PROVIDER=y
> +CONFIG_COMMON_CLK_GPIO=y
>
> #
> # Clocksource
> @@ -665,6 +678,9 @@ CONFIG_CLOCKSOURCE_ARM_ARCHITECTED_TIMER=y
> # CONFIG_MFD_STPMIC1 is not set
> # CONFIG_MFD_RN568PMIC is not set
> # CONFIG_MFD_ATMEL_FLEXCOM is not set
> +# CONFIG_MFD_RK808 is not set
> +# CONFIG_MFD_AXP20X_I2C is not set
> +# CONFIG_MFD_ROHM_BD718XX is not set
> # end of Multifunction device drivers
>
> #
> @@ -730,6 +746,7 @@ CONFIG_GPIOLIB=y
> # CONFIG_GPIO_DESIGNWARE is not set
> # CONFIG_GPIO_SX150X is not set
> # CONFIG_GPIO_SIFIVE is not set
> +# CONFIG_GPIO_LATCH is not set
> # end of GPIO
>
> # CONFIG_W1 is not set
> @@ -767,6 +784,7 @@ CONFIG_REGULATOR_BCM283X=y
> #
> # CONFIG_FIRMWARE_ALTERA_SERIAL is not set
> # CONFIG_ARM_SCMI_PROTOCOL is not set
> +# CONFIG_QEMU_FW_CFG is not set
> # end of Firmware Drivers
>
> #
> @@ -776,7 +794,11 @@ CONFIG_REGULATOR_BCM283X=y
> # end of FPGA Configuration Support
>
> # CONFIG_GENERIC_PHY is not set
> -# CONFIG_CRYPTO_HW is not set
> +
> +#
> +# Hardware crypto devices
> +#
> +# end of Hardware crypto devices
>
> #
> # Memory controller drivers
> @@ -829,6 +851,7 @@ CONFIG_FS_EXT4=y
> CONFIG_FS_RAMFS=y
> CONFIG_FS_DEVFS=y
> CONFIG_FS_TFTP=y
> +CONFIG_FS_TFTP_MAX_WINDOW_SIZE=128
> CONFIG_FS_NFS=y
> CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> @@ -893,11 +916,11 @@ CONFIG_LIBFDT=y
> #
> # end of Library gui routines
>
> -# CONFIG_BAREBOX_LOGO is not set
> -# CONFIG_NLS is not set
> +CONFIG_NLS=y
> # CONFIG_BLOBGEN is not set
> CONFIG_ARCH_HAS_STACK_DUMP=y
> CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
> +CONFIG_ARCH_HAS_ZERO_PAGE=y
> # end of Library routines
>
> #
> @@ -924,6 +947,7 @@ CONFIG_DIGEST_SHA1_GENERIC=y
> # Firmware files
> #
> CONFIG_EXTRA_FIRMWARE_DIR="firmware"
> +CONFIG_MISSING_FIRMWARE_ERROR=y
> # end of Firmware files
>
> #
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> new file mode 100644
> index 0000000..1afe828
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> @@ -0,0 +1,32 @@
> +From: Oleksij Rempel <o.rempel@pengutronix.de>
> +Date: Thu, 6 Jul 2023 09:04:40 +0200
> +Subject: [PATCH] ARM: at91: enable ddramc for sama5d3 and sama5d4
> +
> +ddramc has already support for sama5d3 and sama5d4, so enable it
> +officially.
> +
> +Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> +---
> + arch/arm/mach-at91/Kconfig | 2 ++
> + 1 file changed, 2 insertions(+)
> +
> +diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> +index b803a1185d20..349586b68339 100644
> +--- a/arch/arm/mach-at91/Kconfig
> ++++ b/arch/arm/mach-at91/Kconfig
> +@@ -104,6 +104,7 @@ config SOC_SAMA5D3
> + select HAVE_AT91_UTMI
> + select PINCTRL_AT91
> + select HAS_MACB
> ++ select HAVE_AT91_DDRAMC
> +
> + config SOC_SAMA5D4
> + bool
> +@@ -116,6 +117,7 @@ config SOC_SAMA5D4
> + select HAVE_AT91_UTMI
> + select PINCTRL_AT91
> + select HAS_MACB
> ++ select HAVE_AT91_DDRAMC
> +
> + config SOC_SAM9X60
> + bool
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> new file mode 100644
> index 0000000..7aeec24
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> @@ -0,0 +1,219 @@
> +From: Oleksij Rempel <o.rempel@pengutronix.de>
> +Date: Tue, 4 Jul 2023 06:35:09 +0200
> +Subject: [PATCH] ARM: at91: add support for SAMA5D3 - Ethernet Development
> + System Board
> +
> +Microchip Technology SAMA5D3 Ethernet Development System (EDS) Board
> +(DM320114) is an MPU-based platform for evaluating Ethernet Switch and
> +PHY products. Compatible Ethernet Switch and PHY Evaluation Boards
> +connect to the SAMA5D3 EDS Board via either an RGMII or RMII connector.
> +The Microchip Technology SAMA5D3 EDS Board is not intended for
> +stand-alone use and has no Ethernet capabilities when no daughter board
> +or an USB Ethernet adapter is connected.
> +
> +For more information see:
> +https://www.microchip.com/en-us/development-tool/DM320114
> +
> +Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> +---
> + Documentation/boards/at91.rst | 2 +
> + arch/arm/boards/Makefile | 1 +
> + arch/arm/boards/microchip-sama5d3-eds/Makefile | 3 ++
> + arch/arm/boards/microchip-sama5d3-eds/lowlevel.c | 62 ++++++++++++++++++++++++
> + arch/arm/configs/at91_multi_defconfig | 1 +
> + arch/arm/dts/Makefile | 1 +
> + arch/arm/dts/at91-microchip-sama5d3-eds.dts | 14 ++++++
> + arch/arm/mach-at91/Kconfig | 10 ++++
> + images/Makefile.at91 | 9 ++++
> + 9 files changed, 103 insertions(+)
> + create mode 100644 arch/arm/boards/microchip-sama5d3-eds/Makefile
> + create mode 100644 arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
> + create mode 100644 arch/arm/dts/at91-microchip-sama5d3-eds.dts
> +
> +diff --git a/Documentation/boards/at91.rst b/Documentation/boards/at91.rst
> +index f502979df6eb..961ef58d84ac 100644
> +--- a/Documentation/boards/at91.rst
> ++++ b/Documentation/boards/at91.rst
> +@@ -35,6 +35,8 @@ The resulting images will be placed under ``images/``:
> + barebox-at91sam9263ek.img
> + barebox-microchip-ksz9477-evb.img
> + barebox-microchip-ksz9477-evb-xload-mmc.img
> ++ barebox-microchip-sama5d3-eds.img
> ++ barebox-microchip-sama5d3-eds-xload-mmc.img
> + barebox-sama5d3-xplained.img
> + barebox-sama5d3-xplained-xload-mmc.img
> + barebox-sama5d27-som1-ek.img
> +diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
> +index 2877debad535..382e649fce62 100644
> +--- a/arch/arm/boards/Makefile
> ++++ b/arch/arm/boards/Makefile
> +@@ -121,6 +121,7 @@ obj-$(CONFIG_MACH_SAMA5D27_SOM1) += sama5d27-som1/
> + obj-$(CONFIG_MACH_SAMA5D3XEK) += sama5d3xek/
> + obj-$(CONFIG_MACH_SAMA5D3_XPLAINED) += sama5d3_xplained/
> + obj-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += microchip-ksz9477-evb/
> ++obj-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += microchip-sama5d3-eds/
> + obj-$(CONFIG_MACH_SAMA5D4_XPLAINED) += sama5d4_xplained/
> + obj-$(CONFIG_MACH_SAMA5D4_WIFX) += sama5d4_wifx/
> + obj-$(CONFIG_MACH_SAMA5D4EK) += sama5d4ek/
> +diff --git a/arch/arm/boards/microchip-sama5d3-eds/Makefile b/arch/arm/boards/microchip-sama5d3-eds/Makefile
> +new file mode 100644
> +index 000000000000..458f5209008d
> +--- /dev/null
> ++++ b/arch/arm/boards/microchip-sama5d3-eds/Makefile
> +@@ -0,0 +1,3 @@
> ++# SPDX-License-Identifier: GPL-2.0-only
> ++
> ++lwl-y += lowlevel.o
> +diff --git a/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
> +new file mode 100644
> +index 000000000000..79346a9b6ac1
> +--- /dev/null
> ++++ b/arch/arm/boards/microchip-sama5d3-eds/lowlevel.c
> +@@ -0,0 +1,62 @@
> ++// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause
> ++/*
> ++ * Copyright (C) 2014, Atmel Corporation
> ++ * Copyright (C) 2018 Ahmad Fatoum, Pengutronix
> ++ */
> ++
> ++#include <common.h>
> ++#include <init.h>
> ++
> ++#include <asm/barebox-arm-head.h>
> ++#include <debug_ll.h>
> ++#include <mach/at91/barebox-arm.h>
> ++#include <mach/at91/iomux.h>
> ++#include <mach/at91/sama5d3.h>
> ++#include <mach/at91/sama5d3-xplained-ddramc.h>
> ++#include <mach/at91/xload.h>
> ++
> ++/* PCK = 528MHz, MCK = 132MHz */
> ++#define MASTER_CLOCK 132000000
> ++
> ++static void dbgu_init(void)
> ++{
> ++ void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB);
> ++
> ++ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_PIOB);
> ++
> ++ at91_mux_pio3_pin(pio, pin_to_mask(AT91_PIN_PB31), AT91_MUX_PERIPH_A, 0);
> ++
> ++ sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_DBGU);
> ++ at91_dbgu_setup_ll(IOMEM(AT91_BASE_DBGU1), MASTER_CLOCK, 115200);
> ++
> ++ putc_ll('>');
> ++}
> ++
> ++SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds_xload_mmc, r4)
> ++{
> ++ sama5d3_lowlevel_init();
> ++
> ++ relocate_to_current_adr();
> ++ setup_c();
> ++
> ++ sama5d3_udelay_init(MASTER_CLOCK);
> ++ sama5d3_xplained_ddrconf();
> ++ if (IS_ENABLED(CONFIG_DEBUG_LL))
> ++ dbgu_init();
> ++
> ++ sama5d3_atmci_start_image(0, MASTER_CLOCK, 0);
> ++}
> ++
> ++extern char __dtb_z_at91_microchip_sama5d3_eds_start[];
> ++
> ++SAMA5D3_ENTRY_FUNCTION(start_microchip_sama5d3_eds, r4)
> ++{
> ++ void *fdt;
> ++
> ++ if (IS_ENABLED(CONFIG_DEBUG_LL))
> ++ dbgu_init();
> ++
> ++ fdt = __dtb_z_at91_microchip_sama5d3_eds_start + get_runtime_offset();
> ++
> ++ sama5d3_barebox_entry(r4, fdt);
> ++}
> +diff --git a/arch/arm/configs/at91_multi_defconfig b/arch/arm/configs/at91_multi_defconfig
> +index c93c2f578609..de47af3bd0a6 100644
> +--- a/arch/arm/configs/at91_multi_defconfig
> ++++ b/arch/arm/configs/at91_multi_defconfig
> +@@ -4,6 +4,7 @@ CONFIG_MACH_SKOV_ARM9CPU=y
> + CONFIG_MACH_AT91SAM9263EK=y
> + CONFIG_MACH_AT91SAM9X5EK=y
> + CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> ++CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
> + CONFIG_MACH_SAMA5D3_XPLAINED=y
> + CONFIG_MACH_SAMA5D27_SOM1=y
> + CONFIG_MACH_SAMA5D27_GIANTBOARD=y
> +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> +index 98f4c4e0194b..eb9e0e062adf 100644
> +--- a/arch/arm/dts/Makefile
> ++++ b/arch/arm/dts/Makefile
> +@@ -193,6 +193,7 @@ lwl-$(CONFIG_MACH_AC_SXB) += ac-sxb.dtb.o
> + lwl-$(CONFIG_MACH_AT91SAM9263EK_DT) += at91sam9263ek.dtb.o
> + lwl-$(CONFIG_MACH_SAMA5D3_XPLAINED) += at91-sama5d3_xplained.dtb.o
> + lwl-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += at91-microchip-ksz9477-evb.dtb.o
> ++lwl-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += at91-microchip-sama5d3-eds.dtb.o
> + lwl-$(CONFIG_MACH_SAMA5D27_SOM1) += at91-sama5d27_som1_ek.dtb.o
> + lwl-$(CONFIG_MACH_SAMA5D27_GIANTBOARD) += at91-sama5d27_giantboard.dtb.o
> + lwl-$(CONFIG_MACH_SAMA5D4_WIFX) += at91-sama5d4_wifx_l1.dtb.o
> +diff --git a/arch/arm/dts/at91-microchip-sama5d3-eds.dts b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
> +new file mode 100644
> +index 000000000000..ad75fc882c63
> +--- /dev/null
> ++++ b/arch/arm/dts/at91-microchip-sama5d3-eds.dts
> +@@ -0,0 +1,14 @@
> ++/* SPDX-License-Identifier: GPL-2.0 */
> ++/dts-v1/;
> ++#include <arm/at91-sama5d3_eds.dts>
> ++#include "sama5d3.dtsi"
> ++
> ++/ {
> ++ chosen {
> ++ environment {
> ++ compatible = "barebox,environment";
> ++ device-path = &mmc0, "partname:0";
> ++ file-path = "barebox.env";
> ++ };
> ++ };
> ++};
> +diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> +index 349586b68339..d2499747252d 100644
> +--- a/arch/arm/mach-at91/Kconfig
> ++++ b/arch/arm/mach-at91/Kconfig
> +@@ -606,6 +606,16 @@ config MACH_MICROCHIP_KSZ9477_EVB
> + help
> + Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
> +
> ++config MACH_MICROCHIP_SAMA5D3_EDS
> ++ bool "Microchip SAMA5D3 Ethernet Development System"
> ++ select SOC_SAMA5D3
> ++ select OFDEVICE
> ++ select MCI_ATMEL_PBL
> ++ select COMMON_CLK_OF_PROVIDER
> ++ help
> ++ Select this if you are using Microchip's SAMA5D3 Ethernet Development
> ++ System.
> ++
> + config MACH_SAMA5D3_XPLAINED
> + bool "Atmel SAMA5D3_XPLAINED Evaluation Kit"
> + select SOC_SAMA5D3
> +diff --git a/images/Makefile.at91 b/images/Makefile.at91
> +index 19a81e2e9a3c..36f725940639 100644
> +--- a/images/Makefile.at91
> ++++ b/images/Makefile.at91
> +@@ -20,6 +20,15 @@ MAX_PBL_IMAGE_SIZE_start_sama5d3_xplained_ung8071_xload_mmc = 0xffff
> + FILE_barebox-microchip-ksz9477-evb-xload-mmc.img = start_sama5d3_xplained_ung8071_xload_mmc.pblb
> + image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-xload-mmc.img
> +
> ++pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds
> ++FILE_barebox-microchip-sama5d3-eds.img = start_microchip_sama5d3_eds.pblb
> ++image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds.img
> ++
> ++pblb-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += start_microchip_sama5d3_eds_xload_mmc
> ++MAX_PBL_IMAGE_SIZE_start_microchip_sama5d3_eds_xload_mmc = 0xffff
> ++FILE_barebox-microchip-sama5d3-eds-xload-mmc.img = start_microchip_sama5d3_eds_xload_mmc.pblb
> ++image-$(CONFIG_MACH_MICROCHIP_SAMA5D3_EDS) += barebox-microchip-sama5d3-eds-xload-mmc.img
> ++
> + pblb-$(CONFIG_MACH_SAMA5D3_XPLAINED) += start_sama5d3_xplained
> + FILE_barebox-sama5d3-xplained.img = start_sama5d3_xplained.pblb
> + image-$(CONFIG_MACH_SAMA5D3_XPLAINED) += barebox-sama5d3-xplained.img
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> new file mode 100644
> index 0000000..519ea4a
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> @@ -0,0 +1,23 @@
> +From: Oleksij Rempel <o.rempel@pengutronix.de>
> +Date: Thu, 6 Jul 2023 09:26:22 +0200
> +Subject: [PATCH] ARM: at91: microchip-ksz9477-evb: migrate to
> + sama5d3_barebox_entry()
> +
> +We have sama5d3_barebox_entry(), so make use of it.
> +
> +Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> +---
> + arch/arm/boards/microchip-ksz9477-evb/lowlevel.c | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
> +index bda6a94160a5..aa2161daeef0 100644
> +--- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
> ++++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
> +@@ -58,5 +58,5 @@ SAMA5D3_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r4)
> +
> + fdt = __dtb_z_at91_microchip_ksz9477_evb_start + get_runtime_offset();
> +
> +- barebox_arm_entry(SAMA5_DDRCS, SZ_256M, fdt);
> ++ sama5d3_barebox_entry(r4, fdt);
> + }
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> new file mode 100644
> index 0000000..d6e6193
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> @@ -0,0 +1,22 @@
> +From: Oleksij Rempel <o.rempel@pengutronix.de>
> +Date: Thu, 6 Jul 2023 11:03:50 +0200
> +Subject: [PATCH] Release
> + 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
> +
> +---
> + Makefile | 2 +-
> + 1 file changed, 1 insertion(+), 1 deletion(-)
> +
> +diff --git a/Makefile b/Makefile
> +index 92b5c6779a52..323f757908bc 100644
> +--- a/Makefile
> ++++ b/Makefile
> +@@ -2,7 +2,7 @@
> + VERSION = 2023
> + PATCHLEVEL = 07
> + SUBLEVEL = 1
> +-EXTRAVERSION =
> ++EXTRAVERSION =-20230706-1
> + NAME = None
> +
> + # *DOCUMENTATION*
> diff --git a/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
> new file mode 100644
> index 0000000..bdd8894
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/patches/barebox-2023.07.1/series
> @@ -0,0 +1,13 @@
> +# umpf-base: v2023.07.1
> +# umpf-name: 2023.07.0/customers/pengutronix/distrokit-sama5d3
> +# umpf-version: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
> +# umpf-topic: v2023.07.0/topic/microchip-sama5d3-ether-dev-sys
> +# umpf-hashinfo: 8a1d1b8e7204ee57b743ae7f1325d5729104425e
> +# umpf-topic-range: 0186c17838e655dbf6a3bcd01fa74821d5e67ae6..b2883ce6100ca0f8259a1726bf53387e6da04a99
> +0001-ARM-at91-enable-ddramc-for-sama5d3-and-sama5d4.patch
> +0002-ARM-at91-add-support-for-SAMA5D3-Ethernet-Developmen.patch
> +0003-ARM-at91-microchip-ksz9477-evb-migrate-to-sama5d3_ba.patch
> +# umpf-release: 2023.07.0/customers/pengutronix/distrokit-sama5d3/20230706-1
> +# umpf-topic-range: b2883ce6100ca0f8259a1726bf53387e6da04a99..eaaffd9164ab19a152d00c6d5f8f91cd07e5ec48
> +0101-Release-2023.07.0-customers-pengutronix-distrokit-sa.patch
> +# umpf-end
> diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig
> index 784f35d..160c422 100644
> --- a/configs/platform-v7a_noneon/platformconfig
> +++ b/configs/platform-v7a_noneon/platformconfig
> @@ -180,8 +180,8 @@ PTXCONF_CONSOLE_SPEED="115200"
> # PTXCONF_AT91BOOTSTRAP2 is not set
> PTXCONF_BAREBOX_COMMON_ARCH_STRING="arm"
> PTXCONF_BAREBOX_COMMON=y
> -PTXCONF_BAREBOX_COMMON_VERSION="2022.05.0"
> -PTXCONF_BAREBOX_COMMON_MD5="2bf7e136b3bfb59179f154ee096ef716"
> +PTXCONF_BAREBOX_COMMON_VERSION="2023.07.1"
> +PTXCONF_BAREBOX_COMMON_MD5="0b7ea966cd01266a93a4ccfa7d68bce0"
> PTXCONF_BAREBOX_COMMON_NEEDS_HOST_LZOP=y
> PTXCONF_BAREBOX_AT91=y
> PTXCONF_BAREBOX_VEXPRESS=y
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
prev parent reply other threads:[~2023-07-06 12:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-06 11:44 Oleksij Rempel
2023-07-06 11:44 ` [DistroKit] [PATCH v1 2/5] v7a_noneon: use upstreamed devicetree the KSZ9477 EVB Oleksij Rempel
2023-07-06 12:22 ` Ahmad Fatoum
2023-07-06 11:44 ` [DistroKit] [PATCH v1 3/5] v7a_noneon: add Microchip SAMA5D3 Ethernet Delopment System Board support Oleksij Rempel
2023-07-06 12:50 ` Ahmad Fatoum
2023-07-07 10:26 ` Oleksij Rempel
2023-07-06 11:44 ` [DistroKit] [PATCH v1 4/5] v7a_noneon: kernel: make KSZ9477 work again Oleksij Rempel
2023-07-06 12:51 ` Ahmad Fatoum
2023-07-07 10:25 ` Oleksij Rempel
2023-07-06 11:44 ` [DistroKit] [PATCH v1 5/5] v7a_noneon: kernel: enable Microchip LAN9370 T1 PHY support Oleksij Rempel
2023-07-06 12:52 ` Ahmad Fatoum
2023-07-06 12:20 ` Ahmad Fatoum [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b54ee825-77f6-a49e-0f41-19b363b33fbe@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox