From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>, distrokit@pengutronix.de
Subject: Re: [DistroKit] [PATCH v2 4/7] v7a_noneon: add Microchip SAMA5D3 Ethernet Delopment System Board support
Date: Fri, 7 Jul 2023 15:25:06 +0200 [thread overview]
Message-ID: <c57c8613-4329-7498-aee7-3f269e4da26a@pengutronix.de> (raw)
In-Reply-To: <20230707110818.3510860-5-o.rempel@pengutronix.de>
Hello Oleksij,
On 07.07.23 13:08, Oleksij Rempel wrote:
> Microchip Technology SAMA5D3 Ethernet Development System (EDS) Board
> (DM320114) is an MPU-based platform for evaluating Ethernet Switch and
> PHY products. Compatible Ethernet Switch and PHY Evaluation Boards
> connect to the SAMA5D3 EDS Board via either an RGMII or RMII connector.
> The Microchip Technology SAMA5D3 EDS Board is not intended for
> stand-alone use and has no Ethernet capabilities when no daughter board
> or an USB Ethernet adapter is connected.
>
> For more information see:
> https://www.microchip.com/en-us/development-tool/DM320114
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
> .../platform-v7a_noneon/barebox-at91.config | 61 +++++++++++++++++--
> .../barebox-at91.config.diff | 52 ++++++++++------
> configs/platform-v7a_noneon/platformconfig | 3 +-
> .../platforms/image-sama5d3-eds.in | 13 ++++
> .../rules/barebox-at91.make | 4 +-
> .../rules/blspec-sama5d3-eds.make | 36 +++++++++++
You shouldn't need this file any longer.
Rest looks fine, so with file deleted:
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> .../rules/image-sama5d3-eds.make | 36 +++++++++++
> 7 files changed, 181 insertions(+), 24 deletions(-)
> create mode 100644 configs/platform-v7a_noneon/platforms/image-sama5d3-eds.in
> create mode 100644 configs/platform-v7a_noneon/rules/blspec-sama5d3-eds.make
> create mode 100644 configs/platform-v7a_noneon/rules/image-sama5d3-eds.make
>
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
> index 584bfae..8736816 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config
> +++ b/configs/platform-v7a_noneon/barebox-at91.config
> @@ -63,7 +63,7 @@ CONFIG_AT91_MULTI_BOARDS=y
> # CONFIG_MACH_AT91SAM9263EK is not set
> # CONFIG_MACH_AT91SAM9X5EK is not set
> CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> -# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set
> +CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
> # CONFIG_MACH_SAMA5D3_XPLAINED is not set
> # CONFIG_MACH_SAMA5D27_SOM1 is not set
> # CONFIG_MACH_SAMA5D27_GIANTBOARD is not set
> @@ -105,6 +105,7 @@ CONFIG_BINFMT=y
> CONFIG_UIMAGE=y
> CONFIG_LOGBUF=y
> CONFIG_STDDEV=y
> +CONFIG_UBIFORMAT=y
> CONFIG_USBGADGET_START=y
> CONFIG_BOOT=y
> CONFIG_FASTBOOT_BASE=y
> @@ -307,6 +308,8 @@ CONFIG_CMD_UIMAGE=y
> # CONFIG_CMD_PARTITION is not set
> CONFIG_CMD_AUTOMOUNT=y
> CONFIG_CMD_MOUNT=y
> +CONFIG_CMD_UBI=y
> +CONFIG_CMD_UBIFORMAT=y
> CONFIG_CMD_UMOUNT=y
> # end of Partition
>
> @@ -416,9 +419,13 @@ CONFIG_CMD_DETECT=y
> CONFIG_CMD_FLASH=y
> CONFIG_CMD_GPIO=y
> CONFIG_CMD_LED=y
> +CONFIG_CMD_NAND=y
> +# CONFIG_CMD_NANDTEST is not set
> +# CONFIG_CMD_NAND_BITFLIP is not set
> # CONFIG_CMD_POWEROFF is not set
> CONFIG_CMD_SPI=y
> CONFIG_CMD_LED_TRIGGER=y
> +CONFIG_CMD_USB=y
> CONFIG_CMD_USBGADGET=y
> # end of Hardware manipulation
>
> @@ -526,6 +533,11 @@ CONFIG_MICREL_PHY=y
> # CONFIG_MDIO_BUS_MUX_GPIO is not set
> # end of phylib
>
> +CONFIG_NET_USB=y
> +CONFIG_NET_USB_ASIX=y
> +CONFIG_USB_NET_AX88179_178A=y
> +CONFIG_NET_USB_SMSC95XX=y
> +CONFIG_NET_USB_RTL8152=y
> # CONFIG_DSA is not set
> # end of Network drivers
>
> @@ -564,11 +576,26 @@ CONFIG_MTD_M25P80=y
> # end of Self contained MTD devices
>
> # CONFIG_DRIVER_CFI is not set
> -# CONFIG_NAND is not set
> +CONFIG_NAND=y
> +CONFIG_MTD_NAND_ECC_SOFT=y
> +CONFIG_MTD_NAND_ECC_SW_BCH=y
> +# CONFIG_NAND_ECC_HW_SYNDROME is not set
> +# CONFIG_NAND_ALLOW_ERASE_BAD is not set
> +CONFIG_NAND_ATMEL=y
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> +# CONFIG_MTD_NAND_DENALI is not set
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> # CONFIG_SPI_CADENCE_QUADSPI is not set
> -# CONFIG_MTD_UBI is not set
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BEB_LIMIT=20
> +# CONFIG_MTD_UBI_FASTMAP is not set
> +
> +#
> +# UBI debugging options
> +#
> +# CONFIG_MTD_UBI_CHECK_IO is not set
> +# CONFIG_MTD_UBI_GENERAL_EXTRA_CHECKS is not set
> CONFIG_DISK=y
> CONFIG_DISK_WRITE=y
>
> @@ -583,7 +610,21 @@ CONFIG_DISK_WRITE=y
> #
> # CONFIG_DISK_INTF_PLATFORM_IDE is not set
> CONFIG_USB=y
> -# CONFIG_USB_HOST is not set
> +CONFIG_USB_HOST=y
> +# CONFIG_USB_DWC2_HOST is not set
> +# CONFIG_USB_DWC2_GADGET is not set
> +# CONFIG_USB_DWC3 is not set
> +CONFIG_USB_EHCI=y
> +CONFIG_USB_EHCI_ATMEL=y
> +CONFIG_USB_OHCI_AT91=y
> +# CONFIG_USB_XHCI is not set
> +# CONFIG_USB_ULPI is not set
> +# CONFIG_USB_STORAGE is not set
> +
> +#
> +# USB Miscellaneous drivers
> +#
> +# CONFIG_USB_ONBOARD_HUB is not set
> CONFIG_USB_GADGET=y
> CONFIG_USB_GADGET_DUALSPEED=y
> CONFIG_USB_GADGET_DRIVER_AT91=y
> @@ -672,6 +713,7 @@ CONFIG_LED_TRIGGERS=y
> # Input device support
> #
> # CONFIG_KEYBOARD_GPIO is not set
> +# CONFIG_KEYBOARD_USB is not set
> # CONFIG_INPUT_SPECIALKEYS is not set
> # end of Input device support
>
> @@ -823,6 +865,10 @@ CONFIG_FS_FAT=y
> CONFIG_FS_FAT_WRITE=y
> CONFIG_FS_FAT_LFN=y
> # CONFIG_FS_JFFS2 is not set
> +CONFIG_FS_UBIFS=y
> +CONFIG_FS_UBIFS_COMPRESSION_LZO=y
> +# CONFIG_FS_UBIFS_COMPRESSION_ZLIB is not set
> +CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
> # CONFIG_FS_BPKFS is not set
> # CONFIG_FS_UIMAGEFS is not set
> # CONFIG_FS_PSTORE is not set
> @@ -854,16 +900,20 @@ CONFIG_FS_FAT_LFN=y
> #
> CONFIG_PARAMETER=y
> CONFIG_UNCOMPRESS=y
> +CONFIG_XXHASH=y
> # CONFIG_ZLIB is not set
> # CONFIG_BZLIB is not set
> # CONFIG_LZ4_DECOMPRESS is not set
> -# CONFIG_ZSTD_DECOMPRESS is not set
> +CONFIG_ZSTD_DECOMPRESS=y
> # CONFIG_XZ_DECOMPRESS is not set
> # CONFIG_BASE64 is not set
> CONFIG_PROCESS_ESCAPE_SEQUENCE=y
> CONFIG_LZO_DECOMPRESS=y
> +CONFIG_BCH=y
> CONFIG_FNMATCH=y
> CONFIG_QSORT=y
> +CONFIG_LIBSCAN=y
> +CONFIG_LIBUBIGEN=y
> CONFIG_IMAGE_SPARSE=y
> # CONFIG_RATP is not set
> # CONFIG_ALLOW_PRNG_FALLBACK is not set
> @@ -880,6 +930,7 @@ CONFIG_NLS=y
> CONFIG_ARCH_HAS_STACK_DUMP=y
> CONFIG_ARCH_HAS_DATA_ABORT_MASK=y
> CONFIG_ARCH_HAS_ZERO_PAGE=y
> +CONFIG_GENERIC_ALLOCATOR=y
> # end of Library routines
>
> #
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
> index a183a3d..635e39d 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
> @@ -15,6 +15,7 @@ CONFIG_AT91SAM9_SMC=y
> CONFIG_AT91_MCI_PBL=y
> CONFIG_AT91_MULTI_BOARDS=y
> CONFIG_ATMEL_EBI=y
> +CONFIG_BCH=y
> # CONFIG_BOARD_ARM_GENERIC_DT is not set
> # CONFIG_BOARD_GENERIC_DT is undefined
> CONFIG_BOOTM_OFTREE_UIMAGE=y
> @@ -35,6 +36,9 @@ CONFIG_CMD_AT91_BOOT_TEST=y
> # CONFIG_CMD_MENUTREE is not set
> # CONFIG_CMD_MENU_MANAGEMENT is undefined
> # CONFIG_CMD_MMC is not set
> +CONFIG_CMD_NAND=y
> +# CONFIG_CMD_NANDTEST is not set
> +# CONFIG_CMD_NAND_BITFLIP is not set
> # CONFIG_CMD_OF_FIXUP_STATUS is not set
> # CONFIG_CMD_OF_OVERLAY is not set
> # CONFIG_CMD_PARTITION is not set
> @@ -44,8 +48,9 @@ CONFIG_CMD_AT91_BOOT_TEST=y
> # CONFIG_CMD_SMC is undefined
> # CONFIG_CMD_STATE is undefined
> # CONFIG_CMD_TFTP is not set
> +CONFIG_CMD_UBI=y
> +CONFIG_CMD_UBIFORMAT=y
> # CONFIG_CMD_UNCOMPRESS is not set
> -# CONFIG_CMD_USB is undefined
> # CONFIG_CMD_WD is undefined
> # CONFIG_CMD_WD_DEFAULT_TIMOUT is undefined
> CONFIG_COMMON_CLK_AT91=y
> @@ -64,6 +69,11 @@ CONFIG_DRIVER_SPI_ATMEL=y
> # CONFIG_DRIVER_SPI_GPIO is not set
> # CONFIG_EEPROM_AT24 is undefined
> # CONFIG_FIRMWARE is undefined
> +CONFIG_FS_UBIFS=y
> +CONFIG_FS_UBIFS_COMPRESSION_LZO=y
> +# CONFIG_FS_UBIFS_COMPRESSION_ZLIB is not set
> +CONFIG_FS_UBIFS_COMPRESSION_ZSTD=y
> +CONFIG_GENERIC_ALLOCATOR=y
> # CONFIG_GPIO_PCA953X is undefined
> # CONFIG_GPIO_PCF857X is undefined
> # CONFIG_GPIO_PL061 is undefined
> @@ -89,14 +99,15 @@ CONFIG_HAVE_AT91_UTMI=y
> CONFIG_IMAGE_COMPRESSION_NONE=y
> CONFIG_IMD_TARGET=y
> # CONFIG_KEYBOARD_QT1070 is undefined
> -# CONFIG_KEYBOARD_USB is undefined
> # CONFIG_LED_PCA955X is undefined
> # CONFIG_LIBFDT is undefined
> +CONFIG_LIBSCAN=y
> +CONFIG_LIBUBIGEN=y
> # CONFIG_MACHINE_ID is undefined
> # CONFIG_MACH_AT91SAM9263EK is not set
> # CONFIG_MACH_AT91SAM9X5EK is not set
> CONFIG_MACH_MICROCHIP_KSZ9477_EVB=y
> -# CONFIG_MACH_MICROCHIP_SAMA5D3_EDS is not set
> +CONFIG_MACH_MICROCHIP_SAMA5D3_EDS=y
> # CONFIG_MACH_RPI2 is undefined
> # CONFIG_MACH_RPI3 is undefined
> # CONFIG_MACH_RPI4 is undefined
> @@ -139,13 +150,23 @@ CONFIG_MFD_SYSCON=y
> CONFIG_MICREL_PHY=y
> # CONFIG_MMUINFO is undefined
> CONFIG_MTD_M25P80=y
> +# CONFIG_MTD_NAND_DENALI is not set
> +CONFIG_MTD_NAND_ECC_SOFT=y
> +CONFIG_MTD_NAND_ECC_SW_BCH=y
> +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set
> CONFIG_MTD_SPI_NOR=y
> # CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
> # CONFIG_MTD_SST25L is not set
> -# CONFIG_NET_USB is undefined
> -# CONFIG_NET_USB_ASIX is undefined
> -# CONFIG_NET_USB_RTL8152 is undefined
> -# CONFIG_NET_USB_SMSC95XX is undefined
> +CONFIG_MTD_UBI=y
> +CONFIG_MTD_UBI_BEB_LIMIT=20
> +# CONFIG_MTD_UBI_CHECK_IO is not set
> +# CONFIG_MTD_UBI_FASTMAP is not set
> +# CONFIG_MTD_UBI_GENERAL_EXTRA_CHECKS is not set
> +CONFIG_NAND=y
> +# CONFIG_NAND_ALLOW_ERASE_BAD is not set
> +CONFIG_NAND_ATMEL=y
> +# CONFIG_NAND_ECC_HW_SYNDROME is not set
> +CONFIG_NET_USB_RTL8152=y
> CONFIG_OF_BAREBOX_ENV_IN_FS=y
> # CONFIG_OF_OVERLAY is not set
> # CONFIG_OF_OVERLAY_LIVE is undefined
> @@ -173,19 +194,14 @@ CONFIG_SPI_MEM=y
> CONFIG_SYSTEM_PARTITIONS=y
> # CONFIG_THUMB2_BAREBOX is undefined
> # CONFIG_TYPEC_TUSB320 is undefined
> -# CONFIG_USB_DWC2_GADGET is undefined
> -# CONFIG_USB_DWC2_HOST is undefined
> -# CONFIG_USB_DWC3 is undefined
> -# CONFIG_USB_EHCI is undefined
> +CONFIG_UBIFORMAT=y
> +CONFIG_USB_EHCI_ATMEL=y
> CONFIG_USB_GADGET_DRIVER_AT91=y
> CONFIG_USB_GADGET_DUALSPEED=y
> -# CONFIG_USB_HOST is not set
> # CONFIG_USB_HUB_USB251XB is undefined
> -# CONFIG_USB_NET_AX88179_178A is undefined
> -# CONFIG_USB_ONBOARD_HUB is undefined
> -# CONFIG_USB_STORAGE is undefined
> -# CONFIG_USB_ULPI is undefined
> -# CONFIG_USB_XHCI is undefined
> +CONFIG_USB_NET_AX88179_178A=y
> +CONFIG_USB_OHCI_AT91=y
> +# CONFIG_USB_STORAGE is not set
> CONFIG_VIRTIO_MENU=y
> # CONFIG_VIRTIO_MMIO is not set
> CONFIG_W1=y
> @@ -197,6 +213,7 @@ CONFIG_W1=y
> # CONFIG_WATCHDOG_BCM2835 is undefined
> # CONFIG_WATCHDOG_DW is undefined
> # CONFIG_WATCHDOG_POLLER is undefined
> +CONFIG_XXHASH=y
> # CONFIG_XZ_DECOMPRESS is not set
> # CONFIG_XZ_DEC_ARM is undefined
> # CONFIG_XZ_DEC_ARMTHUMB is undefined
> @@ -205,3 +222,4 @@ CONFIG_W1=y
> # CONFIG_XZ_DEC_SPARC is undefined
> # CONFIG_XZ_DEC_X86 is undefined
> # CONFIG_ZLIB is not set
> +CONFIG_ZSTD_DECOMPRESS=y
> diff --git a/configs/platform-v7a_noneon/platformconfig b/configs/platform-v7a_noneon/platformconfig
> index 1bedb23..1ae6a9d 100644
> --- a/configs/platform-v7a_noneon/platformconfig
> +++ b/configs/platform-v7a_noneon/platformconfig
> @@ -135,7 +135,7 @@ PTXCONF_KERNEL_IMAGE_Z=y
> PTXCONF_KERNEL_IMAGE="zImage"
> PTXCONF_KERNEL_DTB=y
> PTXCONF_KERNEL_DTS_PATH="${PTXDIST_PLATFORMCONFIGDIR}/dts:${KERNEL_DIR}/arch/${GENERIC_KERNEL_ARCH}/boot/dts"
> -PTXCONF_KERNEL_DTS="at91-sama5d3_ksz9477_evb.dts vexpress-v2p-ca9.dts"
> +PTXCONF_KERNEL_DTS="at91-sama5d3_ksz9477_evb.dts vexpress-v2p-ca9.dts at91-sama5d3_eds.dts"
> # PTXCONF_KERNEL_DTBO is not set
> # PTXCONF_KERNEL_CODE_SIGNING is not set
> # PTXCONF_KERNEL_ZSTD is not set
> @@ -239,6 +239,7 @@ PTXCONF_IMAGE_ROOT_TGZ=y
> PTXCONF_IMAGE_ROOT_TGZ_LABEL=""
> # PTXCONF_IMAGE_ROOT_UBI is not set
> # PTXCONF_IMAGE_ROOT_UBIFS is not set
> +PTXCONF_IMAGE_SAMA5D3_EDS=y
> # PTXCONF_IMAGE_VEXPRESS_NOR is not set
> PTXCONF_IMAGE_VEXPRESS=y
>
> diff --git a/configs/platform-v7a_noneon/platforms/image-sama5d3-eds.in b/configs/platform-v7a_noneon/platforms/image-sama5d3-eds.in
> new file mode 100644
> index 0000000..3d3d899
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/platforms/image-sama5d3-eds.in
> @@ -0,0 +1,13 @@
> +## SECTION=image
> +
> +config IMAGE_SAMA5D3_EDS
> + tristate
> + select HOST_GENIMAGE
> + select IMAGE_ROOT_EXT
> + select HOST_DOSFSTOOLS
> + select BAREBOX_AT91
> + select HOST_MTOOLS
> + prompt "Generate images/image-sama5d3-eds.hdimg"
> + help
> + Includes DistroKit support for the Microchip SAMA5D3 Ethernet
> + Development System (EDS).
> diff --git a/configs/platform-v7a_noneon/rules/barebox-at91.make b/configs/platform-v7a_noneon/rules/barebox-at91.make
> index a479f1e..d9576aa 100644
> --- a/configs/platform-v7a_noneon/rules/barebox-at91.make
> +++ b/configs/platform-v7a_noneon/rules/barebox-at91.make
> @@ -48,7 +48,9 @@ BAREBOX_AT91_MAKE_OPT := $(BAREBOX_AT91_CONF_OPT)
>
> BAREBOX_AT91_IMAGES := \
> images/barebox-microchip-ksz9477-evb.img \
> - images/barebox-microchip-ksz9477-evb-xload-mmc.img
> + images/barebox-microchip-ksz9477-evb-xload-mmc.img \
> + images/barebox-microchip-sama5d3-eds.img \
> + images/barebox-microchip-sama5d3-eds-xload-mmc.img
>
> BAREBOX_AT91_IMAGES := $(addprefix $(BAREBOX_AT91_BUILD_DIR)/,$(BAREBOX_AT91_IMAGES))
>
> diff --git a/configs/platform-v7a_noneon/rules/blspec-sama5d3-eds.make b/configs/platform-v7a_noneon/rules/blspec-sama5d3-eds.make
> new file mode 100644
> index 0000000..a4a02f0
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/rules/blspec-sama5d3-eds.make
> @@ -0,0 +1,36 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2020 by Holger Assmann <h.assmann@pengutronix.de>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +PACKAGES-$(PTXCONF_BLSPEC_SAMA5D3_EDS) += blspec-sama5d3-eds
> +
> +BLSPEC_SAMA5D3_EDS_VERSION := 5.8
> +
> +# ----------------------------------------------------------------------------
> +# Target-Install
> +# ----------------------------------------------------------------------------
> +
> +$(STATEDIR)/blspec-sama5d3-eds.targetinstall:
> + @$(call targetinfo)
> +
> + @$(call install_init, blspec-sama5d3-eds)
> + @$(call install_fixup,blspec-sama5d3-eds,PRIORITY,optional)
> + @$(call install_fixup,blspec-sama5d3-eds,SECTION,base)
> + @$(call install_fixup,blspec-sama5d3-eds,AUTHOR,"Holger Assmann <h.assmann@pengutronix.de>")
> + @$(call install_fixup,blspec-sama5d3-eds,DESCRIPTION,missing)
> +
> + @$(call install_alternative, blspec-sama5d3-eds, 0, 0, 0644, \
> + /loader/entries/sama5d3-eds.conf)
> +
> + @$(call install_finish,blspec-sama5d3-eds)
> +
> + @$(call touch)
> +
> +# vim: syntax=make
> diff --git a/configs/platform-v7a_noneon/rules/image-sama5d3-eds.make b/configs/platform-v7a_noneon/rules/image-sama5d3-eds.make
> new file mode 100644
> index 0000000..9879bf1
> --- /dev/null
> +++ b/configs/platform-v7a_noneon/rules/image-sama5d3-eds.make
> @@ -0,0 +1,36 @@
> +# -*-makefile-*-
> +#
> +# Copyright (C) 2020 by Holger Assmann <h.assmann@pengutronix.de>
> +#
> +# For further information about the PTXdist project and license conditions
> +# see the README file.
> +#
> +
> +#
> +# We provide this package
> +#
> +IMAGE_PACKAGES-$(PTXCONF_IMAGE_SAMA5D3_EDS) += image-sama5d3-eds
> +
> +#
> +# Paths and names
> +#
> +IMAGE_SAMA5D3_EDS := image-sama5d3-eds
> +IMAGE_SAMA5D3_EDS_DIR := $(BUILDDIR)/$(IMAGE_SAMA5D3_EDS)
> +IMAGE_SAMA5D3_EDS_IMAGE := $(IMAGEDIR)/image-sama5d3-eds.hdimg
> +IMAGE_SAMA5D3_EDS_FILES := $(IMAGEDIR)/root.tgz
> +IMAGE_SAMA5D3_EDS_CONFIG := at91-sd.config
> +
> +# ----------------------------------------------------------------------------
> +# Image
> +# ----------------------------------------------------------------------------
> +
> +IMAGE_SAMA5D3_EDS_ENV := \
> + FSBL=barebox-microchip-sama5d3-eds-xload-mmc.img \
> + SSBL=barebox-microchip-sama5d3-eds.img
> +
> +$(IMAGE_SAMA5D3_EDS_IMAGE):
> + @$(call targetinfo)
> + @$(call image/genimage, IMAGE_SAMA5D3_EDS)
> + @$(call finish)
> +
> +# vim: syntax=make
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
next prev parent reply other threads:[~2023-07-07 13:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-07 11:08 [DistroKit] [PATCH v2 0/7] v7a_noneon maintenance Oleksij Rempel
2023-07-07 11:08 ` [DistroKit] [PATCH v2 1/7] v7a_noneon: barebox: version bump v2023.01.0 → v2023.07.1 Oleksij Rempel
2023-07-07 11:08 ` [DistroKit] [PATCH v2 2/7] v7a_noneon: use upstreamed devicetree the KSZ9477 EVB Oleksij Rempel
2023-07-07 11:08 ` [DistroKit] [PATCH v2 3/7] v7a_noneon: blspec: convert to ptxdist default entries Oleksij Rempel
2023-07-07 13:23 ` Ahmad Fatoum
2023-07-07 11:08 ` [DistroKit] [PATCH v2 4/7] v7a_noneon: add Microchip SAMA5D3 Ethernet Delopment System Board support Oleksij Rempel
2023-07-07 13:25 ` Ahmad Fatoum [this message]
2023-07-07 11:08 ` [DistroKit] [PATCH v2 5/7] v7a_noneon: kernel: make KSZ9477 work again Oleksij Rempel
2023-07-07 11:08 ` [DistroKit] [PATCH v2 6/7] v7a_noneon: barebox-at91: enable DSA support Oleksij Rempel
2023-07-07 13:26 ` Ahmad Fatoum
2023-07-07 11:08 ` [DistroKit] [PATCH v2 7/7] v7a_noneon: kernel: enable Microchip LAN9370 T1 PHY support Oleksij Rempel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c57c8613-4329-7498-aee7-3f269e4da26a@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=distrokit@pengutronix.de \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox