DistroKit Mailinglist
 help / color / mirror / Atom feed
From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: Roland Hieber <rhi@pengutronix.de>, distrokit@pengutronix.de
Subject: Re: [DistroKit]  [PATCH v3 3/6] v7a: barebox: pass root=mmcblkXpN instead of root=PARTUUID=… to kernel
Date: Wed, 22 Nov 2023 14:27:00 +0100	[thread overview]
Message-ID: <df2ac056-6138-a1a5-692c-e48a6bc624a2@pengutronix.de> (raw)
In-Reply-To: <20231020090519.3320460-3-rhi@pengutronix.de>

Hello Roland,

On 20.10.23 11:05, Roland Hieber wrote:
> Kernels prior to v5.10-rc1 could not ensure deterministic ordering for
> MMC devices. For this reason, the default 'append-root' behaviour of
> barebox for MMC block devices is to append a 'root=PARTUUID=XYZ' option
> to the kernel command line. The PARTUUID is derived from the partition
> table and is expected to be unique system-wide. This is however
> susceptible to breakage if the exact same image is written to different
> boot media in the system, e.g. SD and eMMC, so the PARTUUID will no
> longer uniquely refer to a single partition.
> 
> Newer kernel versions honor the numbering used for 'mmc' aliases,
> which makes 'root=mmcblkXpN' deterministic as long as barebox and
> kernel aliases are identical. Since we're using kernel 6.4, enable this
> option in barebox.

As you mention this feature requires that barebox and kernel aliases
are identical. At least for the STM32MP157C-EV1, this is not the case
as the kernel device tree has no aliases at all.

Can you send a revert?

Cheers,
Ahmad

> 
> Signed-off-by: Roland Hieber <rhi@pengutronix.de>
> ---
> PATCH v3: rebase to current next branch
> 
> PATCH v2: no change
> 
> PATCH v1: https://lore.distrokit.org/distrokit/20231010191631.31141-3-rhi@pengutronix.de
> ---
>  configs/platform-v7a/barebox-am335x.config               | 2 +-
>  configs/platform-v7a/barebox-am335x.config.diff          | 2 +-
>  configs/platform-v7a/barebox-at91.config                 | 2 +-
>  configs/platform-v7a/barebox-at91.config.diff            | 2 +-
>  configs/platform-v7a/barebox-mx6.config                  | 2 +-
>  configs/platform-v7a/barebox-mx6.config.diff             | 2 +-
>  configs/platform-v7a/barebox-rpi2.config                 | 2 +-
>  configs/platform-v7a/barebox-rpi2.config.diff            | 2 +-
>  configs/platform-v7a/barebox-stm32mp.config              | 2 +-
>  configs/platform-v7a/barebox-stm32mp.config.diff         | 2 +-
>  configs/platform-v7a/barebox-vexpress.config             | 2 +-
>  configs/platform-v7a/barebox-vexpress.config.diff        | 2 +-
>  configs/platform-v7a/barebox.config                      | 2 +-
>  configs/platform-v7a_noneon/barebox-at91.config          | 2 +-
>  configs/platform-v7a_noneon/barebox-at91.config.diff     | 2 +-
>  configs/platform-v7a_noneon/barebox-vexpress.config      | 2 +-
>  configs/platform-v7a_noneon/barebox-vexpress.config.diff | 2 +-
>  configs/platform-v7a_noneon/barebox.config               | 2 +-
>  18 files changed, 18 insertions(+), 18 deletions(-)
> 
> diff --git a/configs/platform-v7a/barebox-am335x.config b/configs/platform-v7a/barebox-am335x.config
> index e15e865c4443..40228f3b51e7 100644
> --- a/configs/platform-v7a/barebox-am335x.config
> +++ b/configs/platform-v7a/barebox-am335x.config
> @@ -182,7 +182,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a/barebox-am335x.config.diff b/configs/platform-v7a/barebox-am335x.config.diff
> index 899a66fc9381..95263f963905 100644
> --- a/configs/platform-v7a/barebox-am335x.config.diff
> +++ b/configs/platform-v7a/barebox-am335x.config.diff
> @@ -1,4 +1,4 @@
> -00cfb07a044814b94b716078e86d3d9b
> +da4e754ab156cc4c96aeadfc6c19b73f
>  # CONFIG_AM33XX_NET_BOOT is not set
>  CONFIG_ARCH_AM33XX=y
>  # CONFIG_ARCH_BCM283X is not set
> diff --git a/configs/platform-v7a/barebox-at91.config b/configs/platform-v7a/barebox-at91.config
> index 194d187ff137..1e9d40511ee9 100644
> --- a/configs/platform-v7a/barebox-at91.config
> +++ b/configs/platform-v7a/barebox-at91.config
> @@ -189,7 +189,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a/barebox-at91.config.diff b/configs/platform-v7a/barebox-at91.config.diff
> index 0eca8ce55755..35b055a9fd77 100644
> --- a/configs/platform-v7a/barebox-at91.config.diff
> +++ b/configs/platform-v7a/barebox-at91.config.diff
> @@ -1,4 +1,4 @@
> -00cfb07a044814b94b716078e86d3d9b
> +da4e754ab156cc4c96aeadfc6c19b73f
>  CONFIG_ARCH_AT91=y
>  # CONFIG_ARCH_BCM283X is not set
>  # CONFIG_ARCH_IMX is undefined
> diff --git a/configs/platform-v7a/barebox-mx6.config b/configs/platform-v7a/barebox-mx6.config
> index 06fe1ce71272..49b0c0fb31dc 100644
> --- a/configs/platform-v7a/barebox-mx6.config
> +++ b/configs/platform-v7a/barebox-mx6.config
> @@ -273,7 +273,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a/barebox-mx6.config.diff b/configs/platform-v7a/barebox-mx6.config.diff
> index 8c231f94471c..ba8d9c81a273 100644
> --- a/configs/platform-v7a/barebox-mx6.config.diff
> +++ b/configs/platform-v7a/barebox-mx6.config.diff
> @@ -1,4 +1,4 @@
> -00cfb07a044814b94b716078e86d3d9b
> +da4e754ab156cc4c96aeadfc6c19b73f
>  # CONFIG_ARCH_BCM283X is not set
>  CONFIG_ARCH_HAS_FEC_IMX=y
>  CONFIG_ARCH_HAS_IMX_GPT=y
> diff --git a/configs/platform-v7a/barebox-rpi2.config b/configs/platform-v7a/barebox-rpi2.config
> index 3bcbcc28b754..48c19d04bec7 100644
> --- a/configs/platform-v7a/barebox-rpi2.config
> +++ b/configs/platform-v7a/barebox-rpi2.config
> @@ -175,7 +175,7 @@ CONFIG_BOOTM_OFTREE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a/barebox-rpi2.config.diff b/configs/platform-v7a/barebox-rpi2.config.diff
> index b3b496fca3a8..614e7151fd70 100644
> --- a/configs/platform-v7a/barebox-rpi2.config.diff
> +++ b/configs/platform-v7a/barebox-rpi2.config.diff
> @@ -1,4 +1,4 @@
> -00cfb07a044814b94b716078e86d3d9b
> +da4e754ab156cc4c96aeadfc6c19b73f
>  CONFIG_ARM_ASM_UNIFIED=y
>  # CONFIG_CMD_NVMEM is not set
>  CONFIG_DRIVER_NET_BCMGENET=y
> diff --git a/configs/platform-v7a/barebox-stm32mp.config b/configs/platform-v7a/barebox-stm32mp.config
> index 76f051a68bb1..c9cb065ce3e1 100644
> --- a/configs/platform-v7a/barebox-stm32mp.config
> +++ b/configs/platform-v7a/barebox-stm32mp.config
> @@ -171,7 +171,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a/barebox-stm32mp.config.diff b/configs/platform-v7a/barebox-stm32mp.config.diff
> index 23f14eeed6c1..5708326ae722 100644
> --- a/configs/platform-v7a/barebox-stm32mp.config.diff
> +++ b/configs/platform-v7a/barebox-stm32mp.config.diff
> @@ -1,4 +1,4 @@
> -00cfb07a044814b94b716078e86d3d9b
> +da4e754ab156cc4c96aeadfc6c19b73f
>  # CONFIG_ARCH_BCM283X is not set
>  CONFIG_ARCH_HAS_RESET_CONTROLLER=y
>  CONFIG_ARCH_NR_GPIO=416
> diff --git a/configs/platform-v7a/barebox-vexpress.config b/configs/platform-v7a/barebox-vexpress.config
> index ba2cb67c499c..596776ab88fa 100644
> --- a/configs/platform-v7a/barebox-vexpress.config
> +++ b/configs/platform-v7a/barebox-vexpress.config
> @@ -158,7 +158,7 @@ CONFIG_BOOTM_OFTREE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a/barebox-vexpress.config.diff b/configs/platform-v7a/barebox-vexpress.config.diff
> index ff68e3efa1c3..24345a450c4e 100644
> --- a/configs/platform-v7a/barebox-vexpress.config.diff
> +++ b/configs/platform-v7a/barebox-vexpress.config.diff
> @@ -1,4 +1,4 @@
> -00cfb07a044814b94b716078e86d3d9b
> +da4e754ab156cc4c96aeadfc6c19b73f
>  CONFIG_AMBA_SP804=y
>  # CONFIG_ARCH_BCM283X is not set
>  CONFIG_ARCH_VEXPRESS=y
> diff --git a/configs/platform-v7a/barebox.config b/configs/platform-v7a/barebox.config
> index 7bc38c8cf20f..2cb5df8e4796 100644
> --- a/configs/platform-v7a/barebox.config
> +++ b/configs/platform-v7a/barebox.config
> @@ -174,7 +174,7 @@ CONFIG_BOOTM_OFTREE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config b/configs/platform-v7a_noneon/barebox-at91.config
> index d66e099ecada..600417a314df 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config
> +++ b/configs/platform-v7a_noneon/barebox-at91.config
> @@ -180,7 +180,7 @@ CONFIG_BOOTM_OFTREE_UIMAGE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  CONFIG_SYSTEM_PARTITIONS=y
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a_noneon/barebox-at91.config.diff b/configs/platform-v7a_noneon/barebox-at91.config.diff
> index 29584321f023..9a5ff84cf648 100644
> --- a/configs/platform-v7a_noneon/barebox-at91.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-at91.config.diff
> @@ -1,4 +1,4 @@
> -1dedd85e90c7b6ae44712caf6c69913b
> +4843d0dbea5da5cc603015348ad891de
>  CONFIG_ARCH_AT91=y
>  # CONFIG_ARCH_BCM283X is not set
>  # CONFIG_ARCH_IMX is undefined
> diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config b/configs/platform-v7a_noneon/barebox-vexpress.config
> index d2b7aa6c0073..cf504a6c606c 100644
> --- a/configs/platform-v7a_noneon/barebox-vexpress.config
> +++ b/configs/platform-v7a_noneon/barebox-vexpress.config
> @@ -158,7 +158,7 @@ CONFIG_BOOTM_OFTREE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  # CONFIG_SYSTEM_PARTITIONS is not set
>  CONFIG_IMD=y
> diff --git a/configs/platform-v7a_noneon/barebox-vexpress.config.diff b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> index fff891e02b70..2215ceb876cc 100644
> --- a/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> +++ b/configs/platform-v7a_noneon/barebox-vexpress.config.diff
> @@ -1,4 +1,4 @@
> -1dedd85e90c7b6ae44712caf6c69913b
> +4843d0dbea5da5cc603015348ad891de
>  CONFIG_AMBA_SP804=y
>  # CONFIG_ARCH_BCM283X is not set
>  CONFIG_ARCH_VEXPRESS=y
> diff --git a/configs/platform-v7a_noneon/barebox.config b/configs/platform-v7a_noneon/barebox.config
> index bbedcdb2d650..908bf1fe8d3f 100644
> --- a/configs/platform-v7a_noneon/barebox.config
> +++ b/configs/platform-v7a_noneon/barebox.config
> @@ -174,7 +174,7 @@ CONFIG_BOOTM_OFTREE=y
>  # CONFIG_BOOTM_FITIMAGE is not set
>  CONFIG_BLSPEC=y
>  CONFIG_FLEXIBLE_BOOTARGS=y
> -# CONFIG_MMCBLKDEV_ROOTARG is not set
> +CONFIG_MMCBLKDEV_ROOTARG=y
>  CONFIG_BAREBOX_UPDATE=y
>  # CONFIG_SYSTEM_PARTITIONS is not set
>  CONFIG_IMD=y

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




  reply	other threads:[~2023-11-22 13:27 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-20  9:05 [DistroKit] [PATCH v3 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Roland Hieber
2023-10-20  9:05 ` [DistroKit] [PATCH v3 2/6] images: use 'partition-table-type' option instead of 'partition-table' Roland Hieber
2023-10-20  9:05 ` [DistroKit] [PATCH v3 3/6] v7a: barebox: pass root=mmcblkXpN instead of root=PARTUUID=… to kernel Roland Hieber
2023-11-22 13:27   ` Ahmad Fatoum [this message]
2023-11-22 14:17     ` Roland Hieber
2023-11-22 14:24       ` Ahmad Fatoum
2023-12-11  9:37         ` [DistroKit] [PATCH] v7a: barebox-stm32mp1: pass " Roland Hieber
2023-12-12 17:58           ` Robert Schwebel
2023-10-20  9:05 ` [DistroKit] [PATCH v3 4/6] v7a: barebox: enable GUID Partition Table support Roland Hieber
2023-10-20  9:05 ` [DistroKit] [PATCH v3 5/6] images: remove qemu size hack Roland Hieber
2023-10-20  9:05 ` [DistroKit] [PATCH v3 6/6] images: convert to GPT format Roland Hieber
2023-10-20 10:56 ` [DistroKit] [PATCH v3 1/6] v7a: image-stm32mp: use 'partition-table-type' option instead of 'gpt' Robert Schwebel

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=df2ac056-6138-a1a5-692c-e48a6bc624a2@pengutronix.de \
    --to=a.fatoum@pengutronix.de \
    --cc=distrokit@pengutronix.de \
    --cc=rhi@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox