mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Michael Tretter <m.tretter@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH] dts: zcu104: remove unnecessary ZynqMP clock dtsi
Date: Thu, 18 Mar 2021 10:22:06 +0100	[thread overview]
Message-ID: <20210318092206.2524324-1-m.tretter@pengutronix.de> (raw)

The clock definitions are now available from the Linux device tree as
dts/src/arm64/xilinx/zynqmp-clk-ccf.dtsi and the clock-controller is
defined in dts/src/arm64/xilinx/zynqmp.dtsi. Defining the clocks in a
Barebox-specific file is not necessary anymore.

Remove zynqmp-clk.dtsi and the include from the board device tree.

The files are already correctly included by the imported board device
trees (dts/src/arm64/xilinx/zynqmp-zcu104-revA.dts).

Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
---
 arch/arm/dts/zynqmp-clk.dtsi        | 155 ----------------------------
 arch/arm/dts/zynqmp-zcu104-revA.dts |   1 -
 2 files changed, 156 deletions(-)
 delete mode 100644 arch/arm/dts/zynqmp-clk.dtsi

diff --git a/arch/arm/dts/zynqmp-clk.dtsi b/arch/arm/dts/zynqmp-clk.dtsi
deleted file mode 100644
index 68ece9aa6732..000000000000
--- a/arch/arm/dts/zynqmp-clk.dtsi
+++ /dev/null
@@ -1,155 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Clock specification for Xilinx ZynqMP
- *
- * (C) Copyright 2017, Xilinx, Inc.
- *
- * Michal Simek <michal.simek@xilinx.com>
- */
-
-#include <dt-bindings/clock/xlnx-zynqmp-clk.h>
-
-&zynqmp_firmware {
-       zynqmp_clk: clock-controller {
-               #clock-cells = <1>;
-               compatible = "xlnx,zynqmp-clk";
-               clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
-               clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk", "aux_ref_clk", "gt_crx_ref_clk";
-       };
-};
-
-/ {
-	pss_ref_clk: pss_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <33333333>;
-	};
-
-	video_clk: video_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-	};
-
-	pss_alt_ref_clk: pss_alt_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <0>;
-	};
-
-	gt_crx_ref_clk: gt_crx_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <108000000>;
-	};
-
-	aux_ref_clk: aux_ref_clk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <27000000>;
-	};
-};
-
-&can0 {
-	clocks = <&zynqmp_clk CAN0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&can1 {
-	clocks = <&zynqmp_clk CAN1_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&cpu0 {
-	clocks = <&zynqmp_clk ACPU>;
-};
-
-&gem0 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM0_TX>, <&zynqmp_clk GEM0_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gem1 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM1_TX>, <&zynqmp_clk GEM1_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gem2 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM2_TX>, <&zynqmp_clk GEM2_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gem3 {
-	clocks = <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk LPD_LSBUS>, <&zynqmp_clk GEM3_TX>, <&zynqmp_clk GEM3_REF>, <&zynqmp_clk GEM_TSU>;
-	clock-names = "pclk", "hclk", "tx_clk", "rx_clk", "tsu_clk";
-};
-
-&gpio {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&i2c0 {
-	clocks = <&zynqmp_clk I2C0_REF>;
-};
-
-&i2c1 {
-	clocks = <&zynqmp_clk I2C1_REF>;
-};
-
-&pcie {
-	clocks = <&zynqmp_clk PCIE_REF>;
-};
-
-&sata {
-	clocks = <&zynqmp_clk SATA_REF>;
-};
-
-&sdhci0 {
-	clocks = <&zynqmp_clk SDIO0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&sdhci1 {
-	clocks = <&zynqmp_clk SDIO1_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&spi0 {
-	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&spi1 {
-	clocks = <&zynqmp_clk SPI0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc0 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc1 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc2 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&ttc3 {
-	clocks = <&zynqmp_clk LPD_LSBUS>;
-};
-
-&uart0 {
-	clocks = <&zynqmp_clk UART0_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&uart1 {
-	clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
-};
-
-&usb0 {
-	clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
-};
-
-&usb1 {
-	clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
-};
-
-&watchdog0 {
-	clocks = <&zynqmp_clk WDT>;
-};
diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts
index 8b8dd84c1dc3..8c467ee97045 100644
--- a/arch/arm/dts/zynqmp-zcu104-revA.dts
+++ b/arch/arm/dts/zynqmp-zcu104-revA.dts
@@ -8,4 +8,3 @@
  */
 
 #include <arm64/xilinx/zynqmp-zcu104-revA.dts>
-#include "zynqmp-clk.dtsi"
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


             reply	other threads:[~2021-03-18  9:23 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-18  9:22 Michael Tretter [this message]
2021-03-22  4:38 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210318092206.2524324-1-m.tretter@pengutronix.de \
    --to=m.tretter@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox