mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board
@ 2021-04-09 13:11 Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 1/6] mci: atmel_mci: add PBL support Oleksij Rempel
                   ` (5 more replies)
  0 siblings, 6 replies; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

This patch series provide multiimage support for the microchip-ksz9477-evb.
The main work was done to make atmel_mci driver reusable for the
pbl/xloader.

With this patches it is possible to build first and second stages in one
run with one defconfig.

Oleksij Rempel (6):
  mci: atmel_mci: add PBL support
  ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  ARM: at91: ddramc: add sama5d3_barebox_entry() handler
  ARM: at91: add __sama5d3_stashed_bootrom_r4 helper
  ARM: at91: add sama5d3_lowlevel_init() helpers
  ARM: at91: sama5d3: add multiimage support for the
    microchip-ksz9477-evb

 .../boards/microchip-ksz9477-evb/lowlevel.c   |  33 +-
 arch/arm/mach-at91/Kconfig                    |   2 +
 arch/arm/mach-at91/Makefile                   |   1 +
 arch/arm/mach-at91/ddramc.c                   |   8 +
 arch/arm/mach-at91/include/mach/ddramc.h      |   1 +
 .../mach-at91/include/mach/sama5_bootsource.h |   3 +
 .../include/mach/sama5d3-xplained-ddramc.h    |  88 ++++
 arch/arm/mach-at91/include/mach/sama5d3_ll.h  |  24 +
 arch/arm/mach-at91/include/mach/xload.h       |   4 +
 arch/arm/mach-at91/sama5d3_ll.c               |  34 ++
 arch/arm/mach-at91/xload-mmc.c                |  51 ++
 drivers/mci/Kconfig                           |   4 +
 drivers/mci/Makefile                          |   3 +-
 drivers/mci/atmel-mci-regs.h                  |  37 ++
 drivers/mci/atmel_mci.c                       | 494 +-----------------
 drivers/mci/atmel_mci_common.c                | 465 +++++++++++++++++
 drivers/mci/atmel_mci_pbl.c                   | 115 ++++
 images/Makefile.at91                          |   5 +
 18 files changed, 884 insertions(+), 488 deletions(-)
 create mode 100644 arch/arm/mach-at91/include/mach/sama5d3-xplained-ddramc.h
 create mode 100644 arch/arm/mach-at91/include/mach/sama5d3_ll.h
 create mode 100644 arch/arm/mach-at91/sama5d3_ll.c
 create mode 100644 drivers/mci/atmel_mci_common.c
 create mode 100644 drivers/mci/atmel_mci_pbl.c

-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v1 1/6] mci: atmel_mci: add PBL support
  2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
@ 2021-04-09 13:11 ` Oleksij Rempel
  2021-04-13  4:58   ` Sascha Hauer
  2021-04-09 13:11 ` [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper Oleksij Rempel
                   ` (4 subsequent siblings)
  5 siblings, 1 reply; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Move most of the atmel_mci code to atmel_mci_common.c and introduce
atmel_mci_pbl.c for the PBL part.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-at91/include/mach/xload.h |   2 +
 drivers/mci/Kconfig                     |   4 +
 drivers/mci/Makefile                    |   3 +-
 drivers/mci/atmel-mci-regs.h            |  37 ++
 drivers/mci/atmel_mci.c                 | 494 +-----------------------
 drivers/mci/atmel_mci_common.c          | 465 ++++++++++++++++++++++
 drivers/mci/atmel_mci_pbl.c             | 115 ++++++
 7 files changed, 644 insertions(+), 476 deletions(-)
 create mode 100644 drivers/mci/atmel_mci_common.c
 create mode 100644 drivers/mci/atmel_mci_pbl.c

diff --git a/arch/arm/mach-at91/include/mach/xload.h b/arch/arm/mach-at91/include/mach/xload.h
index 338577c221..9201e7d0b7 100644
--- a/arch/arm/mach-at91/include/mach/xload.h
+++ b/arch/arm/mach-at91/include/mach/xload.h
@@ -7,5 +7,7 @@
 void __noreturn sama5d2_sdhci_start_image(u32 r4);
 
 int at91_sdhci_bio_init(struct pbl_bio *bio, void __iomem *base);
+int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
+		      unsigned int clock, unsigned int slot);
 
 #endif /* __MACH_XLOAD_H */
diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig
index b4c4072596..7d4e72138d 100644
--- a/drivers/mci/Kconfig
+++ b/drivers/mci/Kconfig
@@ -210,6 +210,10 @@ config MCI_IMX_ESDHC_PBL
 	bool
 	select MCI_SDHCI
 
+config MCI_ATMEL_PBL
+	bool
+	select MCI_ATMEL
+
 config MCI_ATMEL_SDHCI_PBL
 	bool
 	select MCI_SDHCI
diff --git a/drivers/mci/Makefile b/drivers/mci/Makefile
index 4a53633674..60dc100c37 100644
--- a/drivers/mci/Makefile
+++ b/drivers/mci/Makefile
@@ -1,10 +1,11 @@
 obj-$(CONFIG_MCI)		+= mci-core.o
 obj-$(CONFIG_MCI_ARASAN)	+= arasan-sdhci.o
-obj-$(CONFIG_MCI_ATMEL)		+= atmel_mci.o
+obj-$(CONFIG_MCI_ATMEL)		+= atmel_mci.o atmel_mci_common.o
 obj-$(CONFIG_MCI_ATMEL_SDHCI)	+= atmel-sdhci.o atmel-sdhci-common.o
 obj-$(CONFIG_MCI_BCM283X)	+= mci-bcm2835.o
 obj-$(CONFIG_MCI_BCM283X_SDHOST)	+= bcm2835-sdhost.o
 obj-$(CONFIG_MCI_DOVE)		+= dove-sdhci.o
+pbl-$(CONFIG_MCI_ATMEL_PBL)	+= atmel_mci_pbl.o atmel_mci_common.o
 pbl-$(CONFIG_MCI_ATMEL_SDHCI_PBL)	+= atmel-sdhci-pbl.o atmel-sdhci-common.o
 obj-$(CONFIG_MCI_IMX)		+= imx.o
 obj-$(CONFIG_MCI_IMX_ESDHC)	+= imx-esdhc.o imx-esdhc-common.o
diff --git a/drivers/mci/atmel-mci-regs.h b/drivers/mci/atmel-mci-regs.h
index 676f419601..045c1a9f38 100644
--- a/drivers/mci/atmel-mci-regs.h
+++ b/drivers/mci/atmel-mci-regs.h
@@ -144,6 +144,37 @@
 #	define ATMCI_PDC_CONNECTED	1
 #endif
 
+struct atmel_mci_caps {
+	bool	has_cfg_reg;
+	bool	has_highspeed;
+	bool    has_rwproof;
+	bool	has_odd_clk_div;
+	bool	need_reset_after_xfer;
+};
+
+struct atmel_mci {
+	struct mci_host		mci;
+	void  __iomem		*regs;
+	struct device_d		*hw_dev;
+	struct clk		*clk;
+
+	u32			datasize;
+	struct mci_cmd		*cmd;
+	struct mci_data		*data;
+	unsigned		slot_b;
+	int			version;
+	struct atmel_mci_caps	caps;
+
+	unsigned long		bus_hz;
+	u32			mode_reg;
+	u32			cfg_reg;
+	u32			sdc_reg;
+	bool			need_reset;
+	int			detect_pin;
+};
+
+#define to_mci_host(mci)	container_of(mci, struct atmel_mci, mci)
+
 /*
  * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
  * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
@@ -158,4 +189,10 @@ static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
 		return 0;
 }
 
+void atmci_common_set_ios(struct atmel_mci *host, struct mci_ios *ios);
+int atmci_reset(struct mci_host *mci, struct device_d *mci_dev);
+int atmci_common_request(struct atmel_mci *host, struct mci_cmd *cmd,
+			 struct mci_data *data);
+void atmci_get_cap(struct atmel_mci *host);
+
 #endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
diff --git a/drivers/mci/atmel_mci.c b/drivers/mci/atmel_mci.c
index 2d51b0e2bc..e676c1bd5c 100644
--- a/drivers/mci/atmel_mci.c
+++ b/drivers/mci/atmel_mci.c
@@ -7,460 +7,28 @@
 /* Atmel MCI driver */
 
 #include <common.h>
-#include <init.h>
-#include <mci.h>
-#include <errno.h>
-#include <clock.h>
 #include <gpio.h>
-#include <io.h>
 #include <linux/clk.h>
-#include <linux/err.h>
-#include <platform_data/atmel-mci.h>
+#include <mci.h>
 #include <of_gpio.h>
+#include <platform_data/atmel-mci.h>
 
 #include "atmel-mci-regs.h"
 
-struct atmel_mci_caps {
-	bool	has_cfg_reg;
-	bool	has_highspeed;
-	bool    has_rwproof;
-	bool	has_odd_clk_div;
-	bool	need_reset_after_xfer;
-};
-
-struct atmel_mci {
-	struct mci_host		mci;
-	void  __iomem		*regs;
-	struct device_d		*hw_dev;
-	struct clk		*clk;
-
-	u32			datasize;
-	struct mci_cmd		*cmd;
-	struct mci_data		*data;
-	unsigned		slot_b;
-	int			version;
-	struct atmel_mci_caps	caps;
-
-	unsigned long		bus_hz;
-	u32			mode_reg;
-	u32			cfg_reg;
-	u32			sdc_reg;
-	bool			need_reset;
-	int			detect_pin;
-};
-
-#define to_mci_host(mci)	container_of(mci, struct atmel_mci, mci)
-
-#define STATUS_ERROR_MASK	(ATMCI_RINDE  \
-				| ATMCI_RDIRE \
-				| ATMCI_RCRCE \
-				| ATMCI_RENDE \
-				| ATMCI_RTOE  \
-				| ATMCI_DCRCE \
-				| ATMCI_DTOE  \
-				| ATMCI_OVRE  \
-				| ATMCI_UNRE)
-
-static void atmci_set_clk_rate(struct atmel_mci *host,
-			       unsigned int clock_min)
-{
-	unsigned int clkdiv;
-
-	if (!host->mode_reg) {
-		clk_enable(host->clk);
-		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
-		if (host->caps.has_cfg_reg)
-			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
-	}
-
-	if (host->caps.has_odd_clk_div) {
-		clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
-		if (clkdiv > 511) {
-			dev_dbg(host->hw_dev,
-			         "clock %u too slow; using %lu\n",
-			         clock_min, host->bus_hz / (511 + 2));
-			clkdiv = 511;
-		}
-		host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
-				 | ATMCI_MR_CLKODD(clkdiv & 1);
-	} else {
-		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
-		if (clkdiv > 255) {
-			dev_dbg(host->hw_dev,
-				 "clock %u too slow; using %lu\n",
-				 clock_min, host->bus_hz / (2 * 256));
-			clkdiv = 255;
-		}
-		host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
-	}
-
-	dev_dbg(host->hw_dev, "atmel_set_clk_rate: clkIn=%ld clkIos=%d divider=%d\n",
-		host->bus_hz, clock_min, clkdiv);
-
-	/*
-	 * WRPROOF and RDPROOF prevent overruns/underruns by
-	 * stopping the clock when the FIFO is full/empty.
-	 * This state is not expected to last for long.
-	 */
-	if (host->caps.has_rwproof)
-		host->mode_reg |= ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF;
-
-	atmci_writel(host, ATMCI_MR, host->mode_reg);
-}
-
-static int atmci_poll_status(struct atmel_mci *host, u32 mask)
-{
-	u32 stat;
-	uint64_t start = get_time_ns();
-
-	do {
-		stat = atmci_readl(host, ATMCI_SR);
-		if (stat & STATUS_ERROR_MASK)
-			return stat;
-		if (is_timeout(start, SECOND)) {
-			dev_err(host->hw_dev, "timeout\n");
-			host->need_reset = true;
-			return ATMCI_RTOE | stat;
-		}
-		if (stat & mask)
-			return 0;
-	} while (1);
-}
-
-static int atmci_pull(struct atmel_mci *host, void *_buf, int bytes)
-{
-	unsigned int stat;
-	u32 *buf = _buf;
-
-	while (bytes > 3) {
-		stat = atmci_poll_status(host, ATMCI_RXRDY);
-		if (stat)
-			return stat;
-
-		*buf++ = atmci_readl(host, ATMCI_RDR);
-		bytes -= 4;
-	}
-
-	if (WARN_ON(bytes))
-		return -EIO;
-
-	return 0;
-}
-
-#ifdef CONFIG_MCI_WRITE
-static int atmci_push(struct atmel_mci *host, const void *_buf, int bytes)
-{
-	unsigned int stat;
-	const u32 *buf = _buf;
-
-	while (bytes > 3) {
-		stat = atmci_poll_status(host, ATMCI_TXRDY);
-		if (stat)
-			return stat;
-
-		atmci_writel(host, ATMCI_TDR, *buf++);
-		bytes -= 4;
-	}
-
-	stat = atmci_poll_status(host, ATMCI_TXRDY);
-	if (stat)
-		return stat;
-
-	if (WARN_ON(bytes))
-		return -EIO;
-
-	return 0;
-}
-#endif /* CONFIG_MCI_WRITE */
-
-static int atmci_transfer_data(struct atmel_mci *host)
-{
-	struct mci_data *data = host->data;
-	int stat;
-	unsigned long length;
-
-	length = data->blocks * data->blocksize;
-	host->datasize = 0;
-
-	if (data->flags & MMC_DATA_READ) {
-		stat = atmci_pull(host, data->dest, length);
-		if (stat)
-			return stat;
-
-		stat = atmci_poll_status(host, ATMCI_NOTBUSY);
-		if (stat)
-			return stat;
-
-		host->datasize += length;
-	} else {
-#ifdef CONFIG_MCI_WRITE
-		stat = atmci_push(host, (const void *)(data->src), length);
-		if (stat)
-			return stat;
-
-		host->datasize += length;
-		stat = atmci_poll_status(host, ATMCI_NOTBUSY);
-		if (stat)
-			return stat;
-#endif /* CONFIG_MCI_WRITE */
-	}
-	return 0;
-}
-
-static void atmci_finish_request(struct atmel_mci *host)
-{
-	host->cmd = NULL;
-	host->data = NULL;
-}
-
-static int atmci_finish_data(struct atmel_mci *host, unsigned int stat)
-{
-	int data_error = 0;
-
-	if (stat & STATUS_ERROR_MASK) {
-		dev_err(host->hw_dev, "request failed (status=0x%08x)\n", stat);
-		if (stat & ATMCI_DCRCE)
-			data_error = -EILSEQ;
-		else if (stat & (ATMCI_RTOE | ATMCI_DTOE))
-			data_error = -ETIMEDOUT;
-		else
-			data_error = -EIO;
-	}
-
-	host->data = NULL;
-
-	return data_error;
-}
-
-static void atmci_setup_data(struct atmel_mci *host, struct mci_data *data)
-{
-	unsigned int nob = data->blocks;
-	unsigned int blksz = data->blocksize;
-	unsigned int datasize = nob * blksz;
-
-	BUG_ON(data->blocksize & 3);
-	BUG_ON(nob == 0);
-
-	host->data = data;
-
-	dev_dbg(host->hw_dev, "atmel_setup_data: nob=%d blksz=%d\n",
-		nob, blksz);
-
-	atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(nob)
-		| ATMCI_BLKLEN(blksz));
-
-	host->datasize = datasize;
-}
-
-static int atmci_read_response(struct atmel_mci *host, unsigned int stat)
-{
-	struct mci_cmd *cmd = host->cmd;
-	int i;
-	u32 *resp;
-
-	if (!cmd)
-		return 0;
-
-	resp = (u32 *)cmd->response;
-
-	if (stat & (ATMCI_RTOE | ATMCI_DTOE)) {
-		dev_err(host->hw_dev, "command/data timeout\n");
-		return -ETIMEDOUT;
-	} else if ((stat & ATMCI_RCRCE) && (cmd->resp_type & MMC_RSP_CRC)) {
-		dev_err(host->hw_dev, "cmd crc error\n");
-		return -EILSEQ;
-	}
-
-	if (cmd->resp_type & MMC_RSP_PRESENT) {
-		if (cmd->resp_type & MMC_RSP_136) {
-			for (i = 0; i < 4; i++)
-				resp[i] = atmci_readl(host, ATMCI_RSPR);
-		} else {
-			resp[0] = atmci_readl(host, ATMCI_RSPR);
-		}
-	}
-
-	return 0;
-}
-
-static int atmci_cmd_done(struct atmel_mci *host, unsigned int stat)
-{
-	int datastat;
-	int ret;
-
-	ret = atmci_read_response(host, stat);
-
-	if (ret) {
-		atmci_finish_request(host);
-		return ret;
-	}
-
-	if (!host->data) {
-		atmci_finish_request(host);
-		return 0;
-	}
-
-	datastat = atmci_transfer_data(host);
-	ret = atmci_finish_data(host, datastat);
-	atmci_finish_request(host);
-	return ret;
-}
-
-static int atmci_start_cmd(struct atmel_mci *host, struct mci_cmd *cmd,
-			   unsigned int cmdat)
-{
-	unsigned flags = 0;
-	unsigned cmdval = 0;
-
-	if (host->cmd != NULL)
-		dev_err(host->hw_dev, "error!\n");
-
-	if ((atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY) == 0) {
-		dev_err(host->hw_dev, "mci not ready!\n");
-		return -EBUSY;
-	}
-
-	host->cmd = cmd;
-	cmdval = ATMCI_CMDR_CMDNB_MASK & cmd->cmdidx;
-
-	switch (cmd->resp_type) {
-	case MMC_RSP_R1: /* short CRC, OPCODE */
-	case MMC_RSP_R1b:/* short CRC, OPCODE, BUSY */
-		flags |= ATMCI_CMDR_RSPTYP_48BIT;
-		break;
-	case MMC_RSP_R2: /* long 136 bit + CRC */
-		flags |= ATMCI_CMDR_RSPTYP_136BIT;
-		break;
-	case MMC_RSP_R3: /* short */
-		flags |= ATMCI_CMDR_RSPTYP_48BIT;
-		break;
-	case MMC_RSP_NONE:
-		flags |= ATMCI_CMDR_RSPTYP_NONE;
-		break;
-	default:
-		dev_err(host->hw_dev, "unhandled response type 0x%x\n",
-				cmd->resp_type);
-		return -EINVAL;
-	}
-	cmdval |= ATMCI_CMDR_RSPTYP & flags;
-	cmdval |= cmdat & ~(ATMCI_CMDR_CMDNB_MASK | ATMCI_CMDR_RSPTYP);
-
-	atmci_writel(host, ATMCI_ARGR, cmd->cmdarg);
-	atmci_writel(host, ATMCI_CMDR, cmdval);
-
-	return 0;
-}
-
-static int atmci_card_present(struct mci_host *mci)
-{
-	struct atmel_mci *host = to_mci_host(mci);
-	int ret;
-
-	/* No gpio, assume card is present */
-	if (!gpio_is_valid(host->detect_pin))
-		return 1;
-
-	ret = gpio_get_value(host->detect_pin);
-
-	return ret == 0 ? 1 : 0;
-}
-
-/** init the host interface */
-static int atmci_reset(struct mci_host *mci, struct device_d *mci_dev)
-{
-	struct atmel_mci *host = to_mci_host(mci);
-
-	clk_enable(host->clk);
-	atmci_writel(host, ATMCI_DTOR, 0x7f);
-	clk_disable(host->clk);
-
-	return 0;
-}
-
 /** change host interface settings */
 static void atmci_set_ios(struct mci_host *mci, struct mci_ios *ios)
 {
 	struct atmel_mci *host = to_mci_host(mci);
 
-	dev_dbg(host->hw_dev, "atmel_mci_set_ios: bus_width=%d clk=%d\n",
-		ios->bus_width, ios->clock);
-
-	host->sdc_reg &= ~ATMCI_SDCBUS_MASK;
-	switch (ios->bus_width) {
-	case MMC_BUS_WIDTH_4:
-		host->sdc_reg |= ATMCI_SDCBUS_4BIT;
-		break;
-	case MMC_BUS_WIDTH_8:
-		host->sdc_reg |= ATMCI_SDCBUS_8BIT;
-		break;
-	case MMC_BUS_WIDTH_1:
-		host->sdc_reg |= ATMCI_SDCBUS_1BIT;
-		break;
-	default:
-		return;
-	}
-
-	if (ios->clock) {
-		atmci_set_clk_rate(host, ios->clock);
-
-		if (host->caps.has_cfg_reg) {
-			/* setup High Speed mode in relation with card capacity */
-			if (ios->timing == MMC_TIMING_SD_HS)
-				host->cfg_reg |= ATMCI_CFG_HSMODE;
-			else
-				host->cfg_reg &= ~ATMCI_CFG_HSMODE;
-
-			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
-		}
-	} else {
-		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
-		if (host->mode_reg) {
-			atmci_readl(host, ATMCI_MR);
-			clk_disable(host->clk);
-		}
-		host->mode_reg = 0;
-	}
-
-	return;
+	atmci_common_set_ios(host, ios);
 }
 
-/** handle a command */
-static int atmci_request(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data)
+static int atmci_send_cmd(struct mci_host *mci, struct mci_cmd *cmd,
+		  struct mci_data *data)
 {
 	struct atmel_mci *host = to_mci_host(mci);
-	u32 stat, cmdat = 0;
-	int ret;
-
-	if (host->need_reset || host->caps.need_reset_after_xfer) {
-		atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
-		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
-		atmci_writel(host, ATMCI_MR, host->mode_reg);
-		if (host->caps.has_cfg_reg)
-			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
-		host->need_reset = false;
-	}
-	atmci_writel(host, ATMCI_SDCR, host->sdc_reg);
 
-	if (cmd->resp_type != MMC_RSP_NONE)
-		cmdat |= ATMCI_CMDR_MAXLAT_64CYC;
-
-	if (data) {
-		atmci_setup_data(host, data);
-
-		cmdat |= ATMCI_CMDR_START_XFER | ATMCI_CMDR_MULTI_BLOCK;
-
-		if (data->flags & MMC_DATA_READ)
-			cmdat |= ATMCI_CMDR_TRDIR_READ;
-	}
-
-	ret = atmci_start_cmd(host, cmd, cmdat);
-	if (ret) {
-		atmci_finish_request(host);
-		return ret;
-	}
-
-	stat = atmci_poll_status(host, ATMCI_CMDRDY);
-	return atmci_cmd_done(host, stat);
+	return atmci_common_request(host, cmd, data);
 }
 
 static void atmci_info(struct device_d *mci_dev)
@@ -484,43 +52,19 @@ static void atmci_info(struct device_d *mci_dev)
 		gpio_is_valid(host->detect_pin) ? "yes" : "no");
 
 }
-/*
- * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
- * HSMCI provides DMA support and a new config register but no more supports
- * PDC.
- */
-static void atmci_get_cap(struct atmel_mci *host)
+
+static int atmci_card_present(struct mci_host *mci)
 {
-	unsigned int version;
-
-	version = atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
-	host->version = version;
-
-	dev_info(host->hw_dev, "version: 0x%x\n", version);
-
-	host->caps.has_cfg_reg = 0;
-	host->caps.has_highspeed = 0;
-	host->caps.need_reset_after_xfer = 1;
-
-	switch (version & 0xf00) {
-	case 0x600:
-	case 0x500:
-		host->caps.has_odd_clk_div = 1;
-	case 0x400:
-	case 0x300:
-		host->caps.has_cfg_reg = 1;
-		host->caps.has_highspeed = 1;
-	case 0x200:
-		host->caps.has_rwproof = 1;
-	case 0x100:
-		host->caps.need_reset_after_xfer = 0;
-	case 0x0:
-		break;
-	default:
-		dev_warn(host->hw_dev,
-				"Unmanaged mci version, set minimum capabilities\n");
-		break;
-	}
+	struct atmel_mci *host = to_mci_host(mci);
+	int ret;
+
+	/* No gpio, assume card is present */
+	if (!gpio_is_valid(host->detect_pin))
+		return 1;
+
+	ret = gpio_get_value(host->detect_pin);
+
+	return ret == 0 ? 1 : 0;
 }
 
 static int atmci_probe(struct device_d *hw_dev)
@@ -532,7 +76,7 @@ static int atmci_probe(struct device_d *hw_dev)
 	int ret;
 
 	host = xzalloc(sizeof(*host));
-	host->mci.send_cmd = atmci_request;
+	host->mci.send_cmd = atmci_send_cmd;
 	host->mci.set_ios = atmci_set_ios;
 	host->mci.init = atmci_reset;
 	host->mci.card_present = atmci_card_present;
diff --git a/drivers/mci/atmel_mci_common.c b/drivers/mci/atmel_mci_common.c
new file mode 100644
index 0000000000..5c9e6f9c4d
--- /dev/null
+++ b/drivers/mci/atmel_mci_common.c
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// SPDX-FileCopyrightText: 2011 Hubert Feurstein <h.feurstein@gmail.com>
+// SPDX-FileCopyrightText: 2009 Ilya Yanok <yanok@emcraft.com>
+// SPDX-FileCopyrightText: 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+// SPDX-FileCopyrightText: 2006 Pavel Pisa <ppisa@pikron.com>, PiKRON
+
+#include <common.h>
+#include <init.h>
+#include <linux/clk.h>
+#include <linux/iopoll.h>
+#include <mci.h>
+
+#include "atmel-mci-regs.h"
+
+#ifdef __PBL__
+#define udelay early_udelay
+#undef  dev_err
+#define dev_err(d, ...)		pr_err(__VA_ARGS__)
+#undef  dev_warn
+#define dev_warn(d, ...)	pr_warn(__VA_ARGS__)
+#undef  dev_dbg
+#define dev_dbg(d, ...)		pr_debug(__VA_ARGS__)
+#undef  dev_info
+#define dev_info(d, ...)	pr_info(__VA_ARGS__)
+#undef	clk_enable
+#define clk_enable(...)
+#undef	clk_disable
+#define clk_disable(...)
+#endif
+
+#define STATUS_ERROR_MASK	(ATMCI_RINDE  \
+				| ATMCI_RDIRE \
+				| ATMCI_RCRCE \
+				| ATMCI_RENDE \
+				| ATMCI_RTOE  \
+				| ATMCI_DCRCE \
+				| ATMCI_DTOE  \
+				| ATMCI_OVRE  \
+				| ATMCI_UNRE)
+
+static void atmci_set_clk_rate(struct atmel_mci *host,
+			       unsigned int clock_min)
+{
+	unsigned int clkdiv;
+
+	if (!host->mode_reg) {
+		clk_enable(host->clk);
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+		if (host->caps.has_cfg_reg)
+			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+	}
+
+	if (host->caps.has_odd_clk_div) {
+		clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2;
+		if (clkdiv > 511) {
+			dev_dbg(host->hw_dev,
+			         "clock %u too slow; using %lu\n",
+			         clock_min, host->bus_hz / (511 + 2));
+			clkdiv = 511;
+		}
+		host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1)
+				 | ATMCI_MR_CLKODD(clkdiv & 1);
+	} else {
+		clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1;
+		if (clkdiv > 255) {
+			dev_dbg(host->hw_dev,
+				 "clock %u too slow; using %lu\n",
+				 clock_min, host->bus_hz / (2 * 256));
+			clkdiv = 255;
+		}
+		host->mode_reg = ATMCI_MR_CLKDIV(clkdiv);
+	}
+
+	dev_dbg(host->hw_dev, "atmel_set_clk_rate: clkIn=%ld clkIos=%d divider=%d\n",
+		host->bus_hz, clock_min, clkdiv);
+
+	/*
+	 * WRPROOF and RDPROOF prevent overruns/underruns by
+	 * stopping the clock when the FIFO is full/empty.
+	 * This state is not expected to last for long.
+	 */
+	if (host->caps.has_rwproof)
+		host->mode_reg |= ATMCI_MR_RDPROOF | ATMCI_MR_WRPROOF;
+
+	atmci_writel(host, ATMCI_MR, host->mode_reg);
+}
+
+static int atmci_poll_status(struct atmel_mci *host, u32 mask)
+{
+	u32 stat;
+	int ret;
+
+	ret = read_poll_timeout(atmci_readl, stat, (stat & mask), SECOND, host,
+				ATMCI_SR);
+	if (ret < 0) {
+		dev_err(host->hw_dev, "timeout\n");
+		host->need_reset = true;
+		return ATMCI_RTOE | stat;
+	}
+
+	if (stat & STATUS_ERROR_MASK)
+		return stat;
+
+	return 0;
+}
+
+static int atmci_pull(struct atmel_mci *host, void *_buf, int bytes)
+{
+	unsigned int stat;
+	u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = atmci_poll_status(host, ATMCI_RXRDY);
+		if (stat)
+			return stat;
+
+		*buf++ = atmci_readl(host, ATMCI_RDR);
+		bytes -= 4;
+	}
+
+	if (WARN_ON(bytes))
+		return -EIO;
+
+	return 0;
+}
+
+#ifdef CONFIG_MCI_WRITE
+static int atmci_push(struct atmel_mci *host, const void *_buf, int bytes)
+{
+	unsigned int stat;
+	const u32 *buf = _buf;
+
+	while (bytes > 3) {
+		stat = atmci_poll_status(host, ATMCI_TXRDY);
+		if (stat)
+			return stat;
+
+		atmci_writel(host, ATMCI_TDR, *buf++);
+		bytes -= 4;
+	}
+
+	stat = atmci_poll_status(host, ATMCI_TXRDY);
+	if (stat)
+		return stat;
+
+	if (WARN_ON(bytes))
+		return -EIO;
+
+	return 0;
+}
+#endif /* CONFIG_MCI_WRITE */
+
+static int atmci_transfer_data(struct atmel_mci *host)
+{
+	struct mci_data *data = host->data;
+	int stat;
+	unsigned long length;
+
+	length = data->blocks * data->blocksize;
+	host->datasize = 0;
+
+	if (data->flags & MMC_DATA_READ) {
+		stat = atmci_pull(host, data->dest, length);
+		if (stat)
+			return stat;
+
+		stat = atmci_poll_status(host, ATMCI_NOTBUSY);
+		if (stat)
+			return stat;
+
+		host->datasize += length;
+	} else {
+#ifdef CONFIG_MCI_WRITE
+		stat = atmci_push(host, (const void *)(data->src), length);
+		if (stat)
+			return stat;
+
+		host->datasize += length;
+		stat = atmci_poll_status(host, ATMCI_NOTBUSY);
+		if (stat)
+			return stat;
+#endif /* CONFIG_MCI_WRITE */
+	}
+	return 0;
+}
+
+static void atmci_finish_request(struct atmel_mci *host)
+{
+	host->cmd = NULL;
+	host->data = NULL;
+}
+
+static int atmci_finish_data(struct atmel_mci *host, unsigned int stat)
+{
+	int data_error = 0;
+
+	if (stat & STATUS_ERROR_MASK) {
+		dev_err(host->hw_dev, "request failed (status=0x%08x)\n", stat);
+		if (stat & ATMCI_DCRCE)
+			data_error = -EILSEQ;
+		else if (stat & (ATMCI_RTOE | ATMCI_DTOE))
+			data_error = -ETIMEDOUT;
+		else
+			data_error = -EIO;
+	}
+
+	host->data = NULL;
+
+	return data_error;
+}
+
+static void atmci_setup_data(struct atmel_mci *host, struct mci_data *data)
+{
+	unsigned int nob = data->blocks;
+	unsigned int blksz = data->blocksize;
+	unsigned int datasize = nob * blksz;
+
+	BUG_ON(data->blocksize & 3);
+	BUG_ON(nob == 0);
+
+	host->data = data;
+
+	dev_dbg(host->hw_dev, "atmel_setup_data: nob=%d blksz=%d\n",
+		nob, blksz);
+
+	atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(nob)
+		| ATMCI_BLKLEN(blksz));
+
+	host->datasize = datasize;
+}
+
+static int atmci_read_response(struct atmel_mci *host, unsigned int stat)
+{
+	struct mci_cmd *cmd = host->cmd;
+	int i;
+	u32 *resp;
+
+	if (!cmd)
+		return 0;
+
+	resp = (u32 *)cmd->response;
+
+	if (stat & (ATMCI_RTOE | ATMCI_DTOE)) {
+		dev_err(host->hw_dev, "command/data timeout\n");
+		return -ETIMEDOUT;
+	} else if ((stat & ATMCI_RCRCE) && (cmd->resp_type & MMC_RSP_CRC)) {
+		dev_err(host->hw_dev, "cmd crc error\n");
+		return -EILSEQ;
+	}
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			for (i = 0; i < 4; i++)
+				resp[i] = atmci_readl(host, ATMCI_RSPR);
+		} else {
+			resp[0] = atmci_readl(host, ATMCI_RSPR);
+		}
+	}
+
+	return 0;
+}
+
+static int atmci_cmd_done(struct atmel_mci *host, unsigned int stat)
+{
+	int datastat;
+	int ret;
+
+	ret = atmci_read_response(host, stat);
+
+	if (ret) {
+		atmci_finish_request(host);
+		return ret;
+	}
+
+	if (!host->data) {
+		atmci_finish_request(host);
+		return 0;
+	}
+
+	datastat = atmci_transfer_data(host);
+	ret = atmci_finish_data(host, datastat);
+	atmci_finish_request(host);
+	return ret;
+}
+
+static int atmci_start_cmd(struct atmel_mci *host, struct mci_cmd *cmd,
+			   unsigned int cmdat)
+{
+	unsigned flags = 0;
+	unsigned cmdval = 0;
+
+	if (host->cmd != NULL)
+		dev_err(host->hw_dev, "error!\n");
+
+	if ((atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY) == 0) {
+		dev_err(host->hw_dev, "mci not ready!\n");
+		return -EBUSY;
+	}
+
+	host->cmd = cmd;
+	cmdval = ATMCI_CMDR_CMDNB_MASK & cmd->cmdidx;
+
+	switch (cmd->resp_type) {
+	case MMC_RSP_R1: /* short CRC, OPCODE */
+	case MMC_RSP_R1b:/* short CRC, OPCODE, BUSY */
+		flags |= ATMCI_CMDR_RSPTYP_48BIT;
+		break;
+	case MMC_RSP_R2: /* long 136 bit + CRC */
+		flags |= ATMCI_CMDR_RSPTYP_136BIT;
+		break;
+	case MMC_RSP_R3: /* short */
+		flags |= ATMCI_CMDR_RSPTYP_48BIT;
+		break;
+	case MMC_RSP_NONE:
+		flags |= ATMCI_CMDR_RSPTYP_NONE;
+		break;
+	default:
+		dev_err(host->hw_dev, "unhandled response type 0x%x\n",
+				cmd->resp_type);
+		return -EINVAL;
+	}
+	cmdval |= ATMCI_CMDR_RSPTYP & flags;
+	cmdval |= cmdat & ~(ATMCI_CMDR_CMDNB_MASK | ATMCI_CMDR_RSPTYP);
+
+	atmci_writel(host, ATMCI_ARGR, cmd->cmdarg);
+	atmci_writel(host, ATMCI_CMDR, cmdval);
+
+	return 0;
+}
+
+/** init the host interface */
+int atmci_reset(struct mci_host *mci, struct device_d *mci_dev)
+{
+	struct atmel_mci *host = to_mci_host(mci);
+
+	clk_enable(host->clk);
+	atmci_writel(host, ATMCI_DTOR, 0x7f);
+	clk_disable(host->clk);
+
+	return 0;
+}
+
+/** change host interface settings */
+void atmci_common_set_ios(struct atmel_mci *host, struct mci_ios *ios)
+{
+	dev_dbg(host->hw_dev, "atmel_mci_set_ios: bus_width=%d clk=%d\n",
+		ios->bus_width, ios->clock);
+
+	host->sdc_reg &= ~ATMCI_SDCBUS_MASK;
+	switch (ios->bus_width) {
+	case MMC_BUS_WIDTH_4:
+		host->sdc_reg |= ATMCI_SDCBUS_4BIT;
+		break;
+	case MMC_BUS_WIDTH_8:
+		host->sdc_reg |= ATMCI_SDCBUS_8BIT;
+		break;
+	case MMC_BUS_WIDTH_1:
+		host->sdc_reg |= ATMCI_SDCBUS_1BIT;
+		break;
+	default:
+		return;
+	}
+
+	if (ios->clock) {
+		atmci_set_clk_rate(host, ios->clock);
+
+		if (host->caps.has_cfg_reg) {
+			/* setup High Speed mode in relation with card capacity */
+			if (ios->timing == MMC_TIMING_SD_HS)
+				host->cfg_reg |= ATMCI_CFG_HSMODE;
+			else
+				host->cfg_reg &= ~ATMCI_CFG_HSMODE;
+
+			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		}
+	} else {
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
+		if (host->mode_reg) {
+			atmci_readl(host, ATMCI_MR);
+			clk_disable(host->clk);
+		}
+		host->mode_reg = 0;
+	}
+
+	return;
+}
+
+/** handle a command */
+int atmci_common_request(struct atmel_mci *host, struct mci_cmd *cmd,
+			 struct mci_data *data)
+{
+	u32 stat, cmdat = 0;
+	int ret;
+
+	if (host->need_reset || host->caps.need_reset_after_xfer) {
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
+		atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
+		atmci_writel(host, ATMCI_MR, host->mode_reg);
+		if (host->caps.has_cfg_reg)
+			atmci_writel(host, ATMCI_CFG, host->cfg_reg);
+		host->need_reset = false;
+	}
+	atmci_writel(host, ATMCI_SDCR, host->sdc_reg);
+
+	if (cmd->resp_type != MMC_RSP_NONE)
+		cmdat |= ATMCI_CMDR_MAXLAT_64CYC;
+
+	if (data) {
+		atmci_setup_data(host, data);
+
+		cmdat |= ATMCI_CMDR_START_XFER | ATMCI_CMDR_MULTI_BLOCK;
+
+		if (data->flags & MMC_DATA_READ)
+			cmdat |= ATMCI_CMDR_TRDIR_READ;
+	}
+
+	ret = atmci_start_cmd(host, cmd, cmdat);
+	if (ret) {
+		atmci_finish_request(host);
+		return ret;
+	}
+
+	stat = atmci_poll_status(host, ATMCI_CMDRDY);
+	return atmci_cmd_done(host, stat);
+}
+
+
+/*
+ * HSMCI (High Speed MCI) module is not fully compatible with MCI module.
+ * HSMCI provides DMA support and a new config register but no more supports
+ * PDC.
+ */
+void atmci_get_cap(struct atmel_mci *host)
+{
+	unsigned int version;
+
+	version = atmci_readl(host, ATMCI_VERSION) & 0x00000fff;
+	host->version = version;
+
+	dev_info(host->hw_dev, "version: 0x%x\n", version);
+
+	host->caps.has_cfg_reg = 0;
+	host->caps.has_highspeed = 0;
+	host->caps.need_reset_after_xfer = 1;
+
+	switch (version & 0xf00) {
+	case 0x600:
+	case 0x500:
+		host->caps.has_odd_clk_div = 1;
+	case 0x400:
+	case 0x300:
+		host->caps.has_cfg_reg = 1;
+		host->caps.has_highspeed = 1;
+	case 0x200:
+		host->caps.has_rwproof = 1;
+	case 0x100:
+		host->caps.need_reset_after_xfer = 0;
+	case 0x0:
+		break;
+	default:
+		dev_warn(host->hw_dev,
+				"Unmanaged mci version, set minimum capabilities\n");
+		break;
+	}
+}
diff --git a/drivers/mci/atmel_mci_pbl.c b/drivers/mci/atmel_mci_pbl.c
new file mode 100644
index 0000000000..ff37dba7ea
--- /dev/null
+++ b/drivers/mci/atmel_mci_pbl.c
@@ -0,0 +1,115 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <common.h>
+#include <mach/xload.h>
+#include <mci.h>
+
+#include "atmel-mci-regs.h"
+
+#define SECTOR_SIZE			512
+#define SUPPORT_MAX_BLOCKS		16U
+
+struct atmel_mci_priv {
+	struct atmel_mci host;
+	bool highcapacity_card;
+};
+
+static struct atmel_mci_priv atmci_sdcard;
+
+static int atmel_mci_pbl_stop_transmission(struct atmel_mci_priv *priv)
+{
+	struct mci_cmd cmd = {
+		.cmdidx = MMC_CMD_STOP_TRANSMISSION,
+		.resp_type = MMC_RSP_R1b,
+	};
+
+	return atmci_common_request(&priv->host, &cmd, NULL);
+}
+
+static int at91_mci_sd_cmd_read_multiple_block(struct atmel_mci_priv *priv,
+				      void *buf,
+				      unsigned int start,
+				      unsigned int block_count)
+{
+	u16 block_len = SECTOR_SIZE;
+	struct mci_data data;
+	struct mci_cmd cmd = {
+		.cmdidx = MMC_CMD_READ_MULTIPLE_BLOCK,
+		.resp_type = MMC_RSP_R1,
+		.cmdarg = start,
+	};
+
+	if (!priv->highcapacity_card)
+		cmd.cmdarg *= block_len;
+
+	data.dest = buf;
+	data.flags = MMC_DATA_READ;
+	data.blocksize = block_len;
+	data.blocks = block_count;
+
+	return atmci_common_request(&priv->host, &cmd, &data);
+}
+
+static int at91_mci_bio_read(struct pbl_bio *bio, off_t start,
+				void *buf, unsigned int nblocks)
+{
+	struct atmel_mci_priv *priv = bio->priv;
+	unsigned int blocks_done = 0;
+	unsigned int blocks;
+	unsigned int block_len = SECTOR_SIZE;
+	unsigned int blocks_read;
+	int ret;
+
+	while (blocks_done < nblocks) {
+		blocks = min(nblocks - blocks_done, SUPPORT_MAX_BLOCKS);
+
+		blocks_read = at91_mci_sd_cmd_read_multiple_block(priv, buf,
+							 start + blocks_done,
+							 blocks);
+
+		ret = atmel_mci_pbl_stop_transmission(priv);
+		if (ret)
+			return ret;
+
+		blocks_done += blocks_read;
+
+		if (blocks_read != blocks)
+			break;
+
+		buf += blocks * block_len;
+	}
+
+	return blocks_done;
+}
+
+int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
+		      unsigned int clock, unsigned int slot)
+{
+	struct atmel_mci_priv *priv = &atmci_sdcard;
+	struct atmel_mci *host = &priv->host;
+	struct mci_ios ios = { .bus_width = MMC_BUS_WIDTH_4, .clock = 25000000 };
+
+	bio->priv = priv;
+	bio->read = at91_mci_bio_read;
+
+	host->regs = base;
+
+	atmci_get_cap(host);
+
+	/* get real HZ */
+	host->bus_hz = clock;
+
+	host->slot_b = slot;
+	if (host->slot_b)
+		host->sdc_reg = ATMCI_SDCSEL_SLOT_B;
+	else
+		host->sdc_reg = ATMCI_SDCSEL_SLOT_A;
+
+	atmci_writel(host, ATMCI_DTOR, 0x7f);
+
+	atmci_common_set_ios(host, &ios);
+
+	priv->highcapacity_card = 1;
+
+	return 0;
+}
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 1/6] mci: atmel_mci: add PBL support Oleksij Rempel
@ 2021-04-09 13:11 ` Oleksij Rempel
  2021-04-13  5:01   ` Sascha Hauer
  2021-04-09 13:11 ` [PATCH v1 3/6] ARM: at91: ddramc: add sama5d3_barebox_entry() handler Oleksij Rempel
                   ` (3 subsequent siblings)
  5 siblings, 1 reply; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

This helper should be called from the xloader

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-at91/Kconfig              |  2 +
 arch/arm/mach-at91/include/mach/xload.h |  2 +
 arch/arm/mach-at91/xload-mmc.c          | 51 +++++++++++++++++++++++++
 3 files changed, 55 insertions(+)

diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 52eefc7361..0fc8d25111 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -45,6 +45,7 @@ config HAVE_AT91_DDRAMC
 
 config AT91_MCI_PBL
 	bool
+	depends on MCI_ATMEL_PBL
 	depends on MCI_ATMEL_SDHCI_PBL
 	default y
 
@@ -599,6 +600,7 @@ config MACH_MICROCHIP_KSZ9477_EVB
 	bool "Microchip EVB-KSZ9477 Evaluation Kit"
 	select SOC_SAMA5D3
 	select OFDEVICE
+	select MCI_ATMEL_PBL
 	select COMMON_CLK_OF_PROVIDER
 	help
 	  Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
diff --git a/arch/arm/mach-at91/include/mach/xload.h b/arch/arm/mach-at91/include/mach/xload.h
index 9201e7d0b7..bbc70af210 100644
--- a/arch/arm/mach-at91/include/mach/xload.h
+++ b/arch/arm/mach-at91/include/mach/xload.h
@@ -5,6 +5,8 @@
 #include <pbl.h>
 
 void __noreturn sama5d2_sdhci_start_image(u32 r4);
+void __noreturn sama5d3_atmci_start_image(u32 r4, unsigned int clock,
+					  unsigned int slot);
 
 int at91_sdhci_bio_init(struct pbl_bio *bio, void __iomem *base);
 int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
diff --git a/arch/arm/mach-at91/xload-mmc.c b/arch/arm/mach-at91/xload-mmc.c
index e9edeccb7f..2e00cfc2a9 100644
--- a/arch/arm/mach-at91/xload-mmc.c
+++ b/arch/arm/mach-at91/xload-mmc.c
@@ -3,6 +3,7 @@
 #include <mach/sama5_bootsource.h>
 #include <mach/hardware.h>
 #include <mach/sama5d2_ll.h>
+#include <mach/sama5d3_ll.h>
 #include <mach/gpio.h>
 #include <linux/sizes.h>
 #include <asm/cache.h>
@@ -44,6 +45,23 @@ static const struct sdhci_instance {
 	},
 };
 
+static const struct atmci_instance {
+	void __iomem *base;
+	unsigned id;
+	u8 periph;
+	s8 pins[15];
+} atmci_instances[] = {
+	[0] = {
+		.base = IOMEM(SAMA5D3_BASE_HSMCI0),
+		.id = SAMA5D3_ID_HSMCI0,
+		.periph = AT91_MUX_PERIPH_A,
+		.pins = {
+			AT91_PIN_PD0, AT91_PIN_PD1, AT91_PIN_PD2, AT91_PIN_PD3,
+			AT91_PIN_PD4, AT91_PIN_PD5, AT91_PIN_PD6, AT91_PIN_PD7,
+			AT91_PIN_PD8, AT91_PIN_PD9, -1 }
+	},
+};
+
 /**
  * sama5d2_sdhci_start_image - Load and start an image from FAT-formatted SDHCI
  * @r4: value of r4 passed by BootROM
@@ -82,3 +100,36 @@ void __noreturn sama5d2_sdhci_start_image(u32 r4)
 out_panic:
 	panic("FAT chainloading failed\n");
 }
+
+void __noreturn sama5d3_atmci_start_image(u32 boot_src, unsigned int clock,
+					  unsigned int slot)
+{
+	void *buf = (void *)SAMA5_DDRCS;
+	const struct atmci_instance *instance;
+	struct pbl_bio bio;
+	const s8 *pin;
+	int ret;
+
+	ret = sama5_bootsource_instance(boot_src);
+	if (ret > 1)
+		panic("Couldn't determine boot MCI instance\n");
+
+	instance = &atmci_instances[boot_src];
+
+	sama5d3_pmc_enable_periph_clock(SAMA5D2_ID_PIOD);
+	for (pin = instance->pins; *pin >= 0; pin++) {
+		at91_mux_pio3_pin(IOMEM(SAMA5D3_BASE_PIOD),
+					 pin_to_mask(*pin), instance->periph, 0);
+	}
+
+	sama5d3_pmc_enable_periph_clock(instance->id);
+
+	ret = at91_mci_bio_init(&bio, instance->base, clock, slot);
+	if (ret)
+		goto out_panic;
+
+	at91_fat_start_image(&bio, buf, SZ_16M, boot_src);
+
+out_panic:
+	panic("FAT chainloading failed\n");
+}
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v1 3/6] ARM: at91: ddramc: add sama5d3_barebox_entry() handler
  2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 1/6] mci: atmel_mci: add PBL support Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper Oleksij Rempel
@ 2021-04-09 13:11 ` Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 4/6] ARM: at91: add __sama5d3_stashed_bootrom_r4 helper Oleksij Rempel
                   ` (2 subsequent siblings)
  5 siblings, 0 replies; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Add sama5d3 specific barebox_entry helper.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-at91/ddramc.c              | 8 ++++++++
 arch/arm/mach-at91/include/mach/ddramc.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/arch/arm/mach-at91/ddramc.c b/arch/arm/mach-at91/ddramc.c
index c3ef6b0090..0aece5345f 100644
--- a/arch/arm/mach-at91/ddramc.c
+++ b/arch/arm/mach-at91/ddramc.c
@@ -26,6 +26,14 @@ void __noreturn sama5d2_barebox_entry(unsigned int r4, void *boarddata)
 			  boarddata);
 }
 
+void __noreturn sama5d3_barebox_entry(unsigned int r4, void *boarddata)
+{
+	__sama5d3_stashed_bootrom_r4 = r4;
+
+	barebox_arm_entry(SAMA5_DDRCS, at91sama5d3_get_ddram_size(),
+			  boarddata);
+}
+
 static int sama5_ddr_probe(struct device_d *dev)
 {
 	struct resource *iores;
diff --git a/arch/arm/mach-at91/include/mach/ddramc.h b/arch/arm/mach-at91/include/mach/ddramc.h
index 5d6f3a70b7..7daef17636 100644
--- a/arch/arm/mach-at91/include/mach/ddramc.h
+++ b/arch/arm/mach-at91/include/mach/ddramc.h
@@ -33,5 +33,6 @@ void at91_lpddr1_sdram_initialize(void __iomem *base_address,
 				  const struct at91_ddramc_register *ddramc_config);
 
 void __noreturn sama5d2_barebox_entry(unsigned int r4, void *boarddata);
+void __noreturn sama5d3_barebox_entry(unsigned int r4, void *boarddata);
 
 #endif /* #ifndef __DDRAMC_H__ */
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v1 4/6] ARM: at91: add __sama5d3_stashed_bootrom_r4 helper
  2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
                   ` (2 preceding siblings ...)
  2021-04-09 13:11 ` [PATCH v1 3/6] ARM: at91: ddramc: add sama5d3_barebox_entry() handler Oleksij Rempel
@ 2021-04-09 13:11 ` Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 5/6] ARM: at91: add sama5d3_lowlevel_init() helpers Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb Oleksij Rempel
  5 siblings, 0 replies; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Add sama5d3 specific __sama5d3_stashed_bootrom_r4 helper.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-at91/include/mach/sama5_bootsource.h | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/mach-at91/include/mach/sama5_bootsource.h b/arch/arm/mach-at91/include/mach/sama5_bootsource.h
index 8355c2eeb6..931e1f29c8 100644
--- a/arch/arm/mach-at91/include/mach/sama5_bootsource.h
+++ b/arch/arm/mach-at91/include/mach/sama5_bootsource.h
@@ -46,6 +46,9 @@ static inline int sama5_bootsource_instance(u32 reg)
 #define __sama5d2_stashed_bootrom_r4 \
 	(*(volatile u32 *)(SAMA5D2_SRAM_BASE + SAMA5D2_SRAM_SIZE - 0x4))
 
+#define __sama5d3_stashed_bootrom_r4 \
+	(*(volatile u32 *)(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE - 0x4))
+
 static inline void __noreturn sama5_boot_xload(void __noreturn (*bb)(void), u32 r4)
 {
 	asm volatile("mov r4, %0" : : "r"(r4) : );
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v1 5/6] ARM: at91: add sama5d3_lowlevel_init() helpers
  2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
                   ` (3 preceding siblings ...)
  2021-04-09 13:11 ` [PATCH v1 4/6] ARM: at91: add __sama5d3_stashed_bootrom_r4 helper Oleksij Rempel
@ 2021-04-09 13:11 ` Oleksij Rempel
  2021-04-09 13:11 ` [PATCH v1 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb Oleksij Rempel
  5 siblings, 0 replies; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

This code can be potentially reused with other sama5d3 based boards

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/mach-at91/Makefile                  |  1 +
 arch/arm/mach-at91/include/mach/sama5d3_ll.h | 24 ++++++++++++++
 arch/arm/mach-at91/sama5d3_ll.c              | 34 ++++++++++++++++++++
 3 files changed, 59 insertions(+)
 create mode 100644 arch/arm/mach-at91/include/mach/sama5d3_ll.h
 create mode 100644 arch/arm/mach-at91/sama5d3_ll.c

diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 9cfba28fa0..c895af7a2f 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_SOC_SAMA5D3)	+= sama5d3.o sama5d3_devices.o
 endif
 lwl-$(CONFIG_SOC_SAMA5D2)	+= sama5d2_ll.o
 obj-$(CONFIG_SOC_SAMA5D2)	+= sama5d2.o
+lwl-$(CONFIG_SOC_SAMA5D3)	+= sama5d3_ll.o
 obj-$(CONFIG_SOC_AT91SAM9G20) += at91sam9260.o at91sam9260_devices.o
 obj-$(CONFIG_SOC_AT91SAM9G45) += at91sam9g45.o at91sam9g45_devices.o
 obj-$(CONFIG_SOC_AT91SAM9X5)	+= at91sam9x5.o at91sam9x5_devices.o
diff --git a/arch/arm/mach-at91/include/mach/sama5d3_ll.h b/arch/arm/mach-at91/include/mach/sama5d3_ll.h
new file mode 100644
index 0000000000..b5b6b5d820
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/sama5d3_ll.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#ifndef __SAMA5D3_LL_H__
+#define __SAMA5D3_LL_H__
+
+#include <mach/at91_pmc_ll.h>
+#include <mach/debug_ll.h>
+#include <mach/early_udelay.h>
+
+void sama5d3_lowlevel_init(void);
+
+static inline void sama5d3_pmc_enable_periph_clock(int clk)
+{
+	at91_pmc_enable_periph_clock(IOMEM(SAMA5D3_BASE_PMC), clk);
+}
+
+/* requires relocation */
+static inline void sama5d3_udelay_init(unsigned int msc)
+{
+	early_udelay_init(IOMEM(SAMA5D3_BASE_PMC), IOMEM(SAMA5D3_BASE_PIT),
+			  SAMA5D3_ID_PIT, msc, AT91_PMC_LL_SAMA5D3);
+}
+
+#endif /* __SAMA5D3_LL_H__ */
diff --git a/arch/arm/mach-at91/sama5d3_ll.c b/arch/arm/mach-at91/sama5d3_ll.c
new file mode 100644
index 0000000000..4650593699
--- /dev/null
+++ b/arch/arm/mach-at91/sama5d3_ll.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-only AND BSD-1-Clause
+// SPDX-FileCopyrightText: 2017, Microchip Corporation
+
+#include <mach/at91_wdt.h>
+#include <mach/barebox-arm.h>
+#include <mach/sama5d3_ll.h>
+
+void sama5d3_lowlevel_init(void)
+{
+	arm_cpu_lowlevel_init();
+
+	at91_wdt_disable(IOMEM(SAMA5D3_BASE_WDT));
+	at91_pmc_init(IOMEM(SAMA5D3_BASE_PMC), AT91_PMC_LL_SAMA5D3);
+
+	/* At this stage the main oscillator
+	 * is supposed to be enabled PCK = MCK = MOSC
+	 */
+
+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
+	at91_pmc_cfg_plla(IOMEM(SAMA5D3_BASE_PMC), AT91_PMC3_MUL_(43)
+			  | AT91_PMC_OUT_0 | AT91_PMC_PLLCOUNT
+			  | AT91_PMC_DIV_BYPASS, AT91_PMC_LL_SAMA5D3);
+
+	/* Initialize PLLA charge pump */
+	at91_pmc_init_pll(IOMEM(SAMA5D3_BASE_PMC), AT91_PMC_IPLLA_3);
+
+	/* Switch PCK/MCK on Main clock output */
+	at91_pmc_cfg_mck(IOMEM(SAMA5D3_BASE_PMC), AT91SAM9_PMC_MDIV_4
+			 | AT91_PMC_CSS_MAIN, AT91_PMC_LL_SAMA5D3);
+
+	/* Switch PCK/MCK on PLLA output */
+	at91_pmc_cfg_mck(IOMEM(SAMA5D3_BASE_PMC), AT91SAM9_PMC_MDIV_4
+			 | AT91_PMC_CSS_PLLA, AT91_PMC_LL_SAMA5D3);
+}
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* [PATCH v1 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb
  2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
                   ` (4 preceding siblings ...)
  2021-04-09 13:11 ` [PATCH v1 5/6] ARM: at91: add sama5d3_lowlevel_init() helpers Oleksij Rempel
@ 2021-04-09 13:11 ` Oleksij Rempel
  5 siblings, 0 replies; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-09 13:11 UTC (permalink / raw)
  To: barebox; +Cc: Oleksij Rempel

Rework the lowlevel init code to make it multiimage capable. With this
patch we can build first and second stage in one run.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../boards/microchip-ksz9477-evb/lowlevel.c   | 33 ++++---
 .../include/mach/sama5d3-xplained-ddramc.h    | 88 +++++++++++++++++++
 images/Makefile.at91                          |  5 ++
 3 files changed, 114 insertions(+), 12 deletions(-)
 create mode 100644 arch/arm/mach-at91/include/mach/sama5d3-xplained-ddramc.h

diff --git a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
index 30a5760da6..93ae481975 100644
--- a/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
+++ b/arch/arm/boards/microchip-ksz9477-evb/lowlevel.c
@@ -8,20 +8,16 @@
 #include <init.h>
 
 #include <asm/barebox-arm-head.h>
-#include <asm/barebox-arm.h>
-#include <mach/at91_pmc_ll.h>
-
-#include <mach/hardware.h>
-#include <mach/iomux.h>
 #include <debug_ll.h>
-#include <mach/at91_dbgu.h>
+#include <mach/barebox-arm.h>
+#include <mach/iomux.h>
+#include <mach/sama5d3.h>
+#include <mach/sama5d3-xplained-ddramc.h>
+#include <mach/xload.h>
 
 /* PCK = 528MHz, MCK = 132MHz */
 #define MASTER_CLOCK	132000000
 
-#define sama5d3_pmc_enable_periph_clock(clk) \
-	at91_pmc_enable_periph_clock(IOMEM(SAMA5D3_BASE_PMC), clk)
-
 static void dbgu_init(void)
 {
 	void __iomem *pio = IOMEM(SAMA5D3_BASE_PIOB);
@@ -36,14 +32,27 @@ static void dbgu_init(void)
 	putc_ll('>');
 }
 
+SAMA5_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071_xload_mmc, r4)
+{
+	sama5d3_lowlevel_init();
+
+	relocate_to_current_adr();
+	setup_c();
+
+	sama5d3_udelay_init(MASTER_CLOCK);
+	sama5d3_xplained_ddrconf();
+	if (IS_ENABLED(CONFIG_DEBUG_LL))
+		dbgu_init();
+
+	sama5d3_atmci_start_image(0, MASTER_CLOCK, 0);
+}
+
 extern char __dtb_z_at91_microchip_ksz9477_evb_start[];
 
-ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r0, r1, r2)
+SAMA5_ENTRY_FUNCTION(start_sama5d3_xplained_ung8071, r4)
 {
 	void *fdt;
 
-	arm_cpu_lowlevel_init();
-
 	arm_setup_stack(SAMA5D3_SRAM_BASE + SAMA5D3_SRAM_SIZE);
 
 	if (IS_ENABLED(CONFIG_DEBUG_LL))
diff --git a/arch/arm/mach-at91/include/mach/sama5d3-xplained-ddramc.h b/arch/arm/mach-at91/include/mach/sama5d3-xplained-ddramc.h
new file mode 100644
index 0000000000..6f829282c6
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/sama5d3-xplained-ddramc.h
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: BSD-1-Clause
+ *
+ * Copyright (C) 2014, Atmel Corporation
+ *
+ * SAMA5D27 System-in-Package DDRAMC configuration
+ */
+
+#include <mach/at91_ddrsdrc.h>
+#include <mach/ddramc.h>
+#include <mach/sama5d3_ll.h>
+
+static inline void sama5d3_xplained_ddrconf(void)
+{
+	const struct at91_ddramc_register conf = {
+		.mdr = AT91_DDRC2_DBW_32_BITS | AT91_DDRC2_MD_DDR2_SDRAM,
+
+		.cr = AT91_DDRC2_NC_DDR10_SDR9
+			| AT91_DDRC2_NR_13
+			| AT91_DDRC2_CAS_3
+			| AT91_DDRC2_DISABLE_RESET_DLL
+			| AT91_DDRC2_ENABLE_DLL
+			| AT91_DDRC2_ENRDM_ENABLE
+			| AT91_DDRC2_NB_BANKS_8
+			| AT91_DDRC2_NDQS_DISABLED
+			| AT91_DDRC2_DECOD_INTERLEAVED
+			| AT91_DDRC2_UNAL_SUPPORTED,
+
+		/*
+		 * The DDR2-SDRAM device requires a refresh every 15.625 us or 7.81 us.
+		 * With a 133 MHz frequency, the refresh timer count register must to be
+		 * set with (15.625 x 133 MHz) ~ 2084 i.e. 0x824
+		 * or (7.81 x 133 MHz) ~ 1039 i.e. 0x40F.
+		 */
+		.rtr = 0x40F,     /* Refresh timer: 7.812us */
+
+		/* One clock cycle @ 133 MHz = 7.5 ns */
+		.t0pr = AT91_DDRC2_TRAS_(6)	/* 6 * 7.5 = 45 ns */
+			| AT91_DDRC2_TRCD_(2)	/* 2 * 7.5 = 22.5 ns */
+			| AT91_DDRC2_TWR_(2)	/* 2 * 7.5 = 15   ns */
+			| AT91_DDRC2_TRC_(8)	/* 8 * 7.5 = 75   ns */
+			| AT91_DDRC2_TRP_(2)	/* 2 * 7.5 = 15   ns */
+			| AT91_DDRC2_TRRD_(2)	/* 2 * 7.5 = 15   ns */
+			| AT91_DDRC2_TWTR_(2)	/* 2 clock cycles min */
+			| AT91_DDRC2_TMRD_(2),	/* 2 clock cycles */
+
+		.t1pr = AT91_DDRC2_TXP_(2)		/* 2 clock cycles */
+			| AT91_DDRC2_TXSRD_(200)	/* 200 clock cycles */
+			| AT91_DDRC2_TXSNR_(19)	/* 19 * 7.5 = 142.5 ns */
+			| AT91_DDRC2_TRFC_(17),	/* 17 * 7.5 = 127.5 ns */
+
+		.t2pr = AT91_DDRC2_TFAW_(6)	/* 6 * 7.5 = 45 ns */
+			| AT91_DDRC2_TRTP_(2)		/* 2 clock cycles min */
+			| AT91_DDRC2_TRPA_(2)		/* 2 * 7.5 = 15 ns */
+			| AT91_DDRC2_TXARDS_(8)	/* = TXARD */
+			| AT91_DDRC2_TXARD_(8),	/* MR12 = 1 */
+	};
+	u32 reg;
+
+	/* enable ddr2 clock */
+	sama5d3_pmc_enable_periph_clock(SAMA5D3_ID_MPDDRC);
+	at91_pmc_enable_system_clock(IOMEM(SAMA5D3_BASE_PMC), AT91CAP9_PMC_DDR);
+
+
+	/* Init the special register for sama5d3x */
+	/* MPDDRC DLL Slave Offset Register: DDR2 configuration */
+	reg = AT91_MPDDRC_S0OFF_1
+		| AT91_MPDDRC_S2OFF_1
+		| AT91_MPDDRC_S3OFF_1;
+	writel(reg, SAMA5D3_BASE_MPDDRC + AT91_MPDDRC_DLL_SOR);
+
+	/* MPDDRC DLL Master Offset Register */
+	/* write master + clk90 offset */
+	reg = AT91_MPDDRC_MOFF_7
+		| AT91_MPDDRC_CLK90OFF_31
+		| AT91_MPDDRC_SELOFF_ENABLED | AT91_MPDDRC_KEY;
+	writel(reg, SAMA5D3_BASE_MPDDRC + AT91_MPDDRC_DLL_MOR);
+
+	/* MPDDRC I/O Calibration Register */
+	/* DDR2 RZQ = 50 Ohm */
+	/* TZQIO = 4 */
+	reg = AT91_MPDDRC_RDIV_DDR2_RZQ_50
+		| AT91_MPDDRC_TZQIO_4;
+	writel(reg, SAMA5D3_BASE_MPDDRC + AT91_MPDDRC_IO_CALIBR);
+
+	/* DDRAM2 Controller initialize */
+	at91_ddram_initialize(IOMEM(SAMA5D3_BASE_MPDDRC), IOMEM(SAMA5_DDRCS),
+			      &conf);
+}
diff --git a/images/Makefile.at91 b/images/Makefile.at91
index 00fa4cab27..7c32049270 100644
--- a/images/Makefile.at91
+++ b/images/Makefile.at91
@@ -14,6 +14,11 @@ pblb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += start_sama5d3_xplained_ung8071
 FILE_barebox-microchip-ksz9477-evb.img = start_sama5d3_xplained_ung8071.pblb
 image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb.img
 
+pblb-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += start_sama5d3_xplained_ung8071_xload_mmc
+MAX_PBL_IMAGE_SIZE_start_sama5d3_xplained_ung8071_xload_mmc = 0xffff
+FILE_barebox-microchip-ksz9477-evb-xload-mmc.img = start_sama5d3_xplained_ung8071_xload_mmc.pblb
+image-$(CONFIG_MACH_MICROCHIP_KSZ9477_EVB) += barebox-microchip-ksz9477-evb-xload-mmc.img
+
 pblb-$(CONFIG_MACH_SAMA5D27_SOM1) += start_sama5d27_som1_ek
 FILE_barebox-sama5d27-som1-ek.img = start_sama5d27_som1_ek.pblb
 image-$(CONFIG_MACH_SAMA5D27_SOM1) += barebox-sama5d27-som1-ek.img
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v1 1/6] mci: atmel_mci: add PBL support
  2021-04-09 13:11 ` [PATCH v1 1/6] mci: atmel_mci: add PBL support Oleksij Rempel
@ 2021-04-13  4:58   ` Sascha Hauer
  2021-04-23 14:14     ` Oleksij Rempel
  0 siblings, 1 reply; 11+ messages in thread
From: Sascha Hauer @ 2021-04-13  4:58 UTC (permalink / raw)
  To: Oleksij Rempel; +Cc: barebox

On Fri, Apr 09, 2021 at 03:11:44PM +0200, Oleksij Rempel wrote:
> +int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
> +		      unsigned int clock, unsigned int slot)
> +{
> +	struct atmel_mci_priv *priv = &atmci_sdcard;
> +	struct atmel_mci *host = &priv->host;
> +	struct mci_ios ios = { .bus_width = MMC_BUS_WIDTH_4, .clock = 25000000 };
> +
> +	bio->priv = priv;
> +	bio->read = at91_mci_bio_read;
> +
> +	host->regs = base;
> +
> +	atmci_get_cap(host);
> +
> +	/* get real HZ */
> +	host->bus_hz = clock;
> +
> +	host->slot_b = slot;
> +	if (host->slot_b)
> +		host->sdc_reg = ATMCI_SDCSEL_SLOT_B;
> +	else
> +		host->sdc_reg = ATMCI_SDCSEL_SLOT_A;
> +
> +	atmci_writel(host, ATMCI_DTOR, 0x7f);
> +
> +	atmci_common_set_ios(host, &ios);

Is it necessary to call this? The ROM should have already configured the
controller. By relying on this you could drop the controller
initialization code from PBL.

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper
  2021-04-09 13:11 ` [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper Oleksij Rempel
@ 2021-04-13  5:01   ` Sascha Hauer
  0 siblings, 0 replies; 11+ messages in thread
From: Sascha Hauer @ 2021-04-13  5:01 UTC (permalink / raw)
  To: Oleksij Rempel; +Cc: barebox

On Fri, Apr 09, 2021 at 03:11:45PM +0200, Oleksij Rempel wrote:
> This helper should be called from the xloader
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> ---
>  arch/arm/mach-at91/Kconfig              |  2 +
>  arch/arm/mach-at91/include/mach/xload.h |  2 +
>  arch/arm/mach-at91/xload-mmc.c          | 51 +++++++++++++++++++++++++
>  3 files changed, 55 insertions(+)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 52eefc7361..0fc8d25111 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -45,6 +45,7 @@ config HAVE_AT91_DDRAMC
>  
>  config AT91_MCI_PBL
>  	bool
> +	depends on MCI_ATMEL_PBL
>  	depends on MCI_ATMEL_SDHCI_PBL
>  	default y
>  
> @@ -599,6 +600,7 @@ config MACH_MICROCHIP_KSZ9477_EVB
>  	bool "Microchip EVB-KSZ9477 Evaluation Kit"
>  	select SOC_SAMA5D3
>  	select OFDEVICE
> +	select MCI_ATMEL_PBL
>  	select COMMON_CLK_OF_PROVIDER
>  	help
>  	  Select this if you are using Microchip's EVB-KSZ9477 Evaluation Kit.
> diff --git a/arch/arm/mach-at91/include/mach/xload.h b/arch/arm/mach-at91/include/mach/xload.h
> index 9201e7d0b7..bbc70af210 100644
> --- a/arch/arm/mach-at91/include/mach/xload.h
> +++ b/arch/arm/mach-at91/include/mach/xload.h
> @@ -5,6 +5,8 @@
>  #include <pbl.h>
>  
>  void __noreturn sama5d2_sdhci_start_image(u32 r4);
> +void __noreturn sama5d3_atmci_start_image(u32 r4, unsigned int clock,
> +					  unsigned int slot);
>  
>  int at91_sdhci_bio_init(struct pbl_bio *bio, void __iomem *base);
>  int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
> diff --git a/arch/arm/mach-at91/xload-mmc.c b/arch/arm/mach-at91/xload-mmc.c
> index e9edeccb7f..2e00cfc2a9 100644
> --- a/arch/arm/mach-at91/xload-mmc.c
> +++ b/arch/arm/mach-at91/xload-mmc.c
> @@ -3,6 +3,7 @@
>  #include <mach/sama5_bootsource.h>
>  #include <mach/hardware.h>
>  #include <mach/sama5d2_ll.h>
> +#include <mach/sama5d3_ll.h>
>  #include <mach/gpio.h>
>  #include <linux/sizes.h>
>  #include <asm/cache.h>
> @@ -44,6 +45,23 @@ static const struct sdhci_instance {
>  	},
>  };
>  
> +static const struct atmci_instance {
> +	void __iomem *base;
> +	unsigned id;
> +	u8 periph;
> +	s8 pins[15];
> +} atmci_instances[] = {
> +	[0] = {
> +		.base = IOMEM(SAMA5D3_BASE_HSMCI0),
> +		.id = SAMA5D3_ID_HSMCI0,
> +		.periph = AT91_MUX_PERIPH_A,
> +		.pins = {
> +			AT91_PIN_PD0, AT91_PIN_PD1, AT91_PIN_PD2, AT91_PIN_PD3,
> +			AT91_PIN_PD4, AT91_PIN_PD5, AT91_PIN_PD6, AT91_PIN_PD7,
> +			AT91_PIN_PD8, AT91_PIN_PD9, -1 }
> +	},
> +};

What about SAMA5D3_BASE_HSMCI1? Please either add it here or don't
access it below.

Sascha

> +
>  /**
>   * sama5d2_sdhci_start_image - Load and start an image from FAT-formatted SDHCI
>   * @r4: value of r4 passed by BootROM
> @@ -82,3 +100,36 @@ void __noreturn sama5d2_sdhci_start_image(u32 r4)
>  out_panic:
>  	panic("FAT chainloading failed\n");
>  }
> +
> +void __noreturn sama5d3_atmci_start_image(u32 boot_src, unsigned int clock,
> +					  unsigned int slot)
> +{
> +	void *buf = (void *)SAMA5_DDRCS;
> +	const struct atmci_instance *instance;
> +	struct pbl_bio bio;
> +	const s8 *pin;
> +	int ret;
> +
> +	ret = sama5_bootsource_instance(boot_src);
> +	if (ret > 1)
> +		panic("Couldn't determine boot MCI instance\n");
> +
> +	instance = &atmci_instances[boot_src];
> +
> +	sama5d3_pmc_enable_periph_clock(SAMA5D2_ID_PIOD);
> +	for (pin = instance->pins; *pin >= 0; pin++) {
> +		at91_mux_pio3_pin(IOMEM(SAMA5D3_BASE_PIOD),
> +					 pin_to_mask(*pin), instance->periph, 0);
> +	}
> +
> +	sama5d3_pmc_enable_periph_clock(instance->id);
> +
> +	ret = at91_mci_bio_init(&bio, instance->base, clock, slot);
> +	if (ret)
> +		goto out_panic;
> +
> +	at91_fat_start_image(&bio, buf, SZ_16M, boot_src);
> +
> +out_panic:
> +	panic("FAT chainloading failed\n");
> +}
> -- 
> 2.29.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v1 1/6] mci: atmel_mci: add PBL support
  2021-04-13  4:58   ` Sascha Hauer
@ 2021-04-23 14:14     ` Oleksij Rempel
  2021-05-03 11:39       ` Sascha Hauer
  0 siblings, 1 reply; 11+ messages in thread
From: Oleksij Rempel @ 2021-04-23 14:14 UTC (permalink / raw)
  To: Sascha Hauer; +Cc: barebox

On Tue, Apr 13, 2021 at 06:58:10AM +0200, Sascha Hauer wrote:
> On Fri, Apr 09, 2021 at 03:11:44PM +0200, Oleksij Rempel wrote:
> > +int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
> > +		      unsigned int clock, unsigned int slot)
> > +{
> > +	struct atmel_mci_priv *priv = &atmci_sdcard;
> > +	struct atmel_mci *host = &priv->host;
> > +	struct mci_ios ios = { .bus_width = MMC_BUS_WIDTH_4, .clock = 25000000 };
> > +
> > +	bio->priv = priv;
> > +	bio->read = at91_mci_bio_read;
> > +
> > +	host->regs = base;
> > +
> > +	atmci_get_cap(host);
> > +
> > +	/* get real HZ */
> > +	host->bus_hz = clock;
> > +
> > +	host->slot_b = slot;
> > +	if (host->slot_b)
> > +		host->sdc_reg = ATMCI_SDCSEL_SLOT_B;
> > +	else
> > +		host->sdc_reg = ATMCI_SDCSEL_SLOT_A;
> > +
> > +	atmci_writel(host, ATMCI_DTOR, 0x7f);
> > +
> > +	atmci_common_set_ios(host, &ios);
> 
> Is it necessary to call this? The ROM should have already configured the
> controller. By relying on this you could drop the controller
> initialization code from PBL.

We get MCI controller in disabled state. I do not see any way to avoid
reconfiguration.

Regards,
Oleksij
-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

* Re: [PATCH v1 1/6] mci: atmel_mci: add PBL support
  2021-04-23 14:14     ` Oleksij Rempel
@ 2021-05-03 11:39       ` Sascha Hauer
  0 siblings, 0 replies; 11+ messages in thread
From: Sascha Hauer @ 2021-05-03 11:39 UTC (permalink / raw)
  To: Oleksij Rempel; +Cc: barebox

On Fri, Apr 23, 2021 at 04:14:44PM +0200, Oleksij Rempel wrote:
> On Tue, Apr 13, 2021 at 06:58:10AM +0200, Sascha Hauer wrote:
> > On Fri, Apr 09, 2021 at 03:11:44PM +0200, Oleksij Rempel wrote:
> > > +int at91_mci_bio_init(struct pbl_bio *bio, void __iomem *base,
> > > +		      unsigned int clock, unsigned int slot)
> > > +{
> > > +	struct atmel_mci_priv *priv = &atmci_sdcard;
> > > +	struct atmel_mci *host = &priv->host;
> > > +	struct mci_ios ios = { .bus_width = MMC_BUS_WIDTH_4, .clock = 25000000 };
> > > +
> > > +	bio->priv = priv;
> > > +	bio->read = at91_mci_bio_read;
> > > +
> > > +	host->regs = base;
> > > +
> > > +	atmci_get_cap(host);
> > > +
> > > +	/* get real HZ */
> > > +	host->bus_hz = clock;
> > > +
> > > +	host->slot_b = slot;
> > > +	if (host->slot_b)
> > > +		host->sdc_reg = ATMCI_SDCSEL_SLOT_B;
> > > +	else
> > > +		host->sdc_reg = ATMCI_SDCSEL_SLOT_A;
> > > +
> > > +	atmci_writel(host, ATMCI_DTOR, 0x7f);
> > > +
> > > +	atmci_common_set_ios(host, &ios);
> > 
> > Is it necessary to call this? The ROM should have already configured the
> > controller. By relying on this you could drop the controller
> > initialization code from PBL.
> 
> We get MCI controller in disabled state. I do not see any way to avoid
> reconfiguration.

So on Atmel the ROM cleans up after itself, so in that case you have to
re-initialize it of course. i.MX doesn't do this, so I asked.

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


^ permalink raw reply	[flat|nested] 11+ messages in thread

end of thread, other threads:[~2021-05-03 11:44 UTC | newest]

Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-09 13:11 [PATCH v1 0/6] add multiimage support for sama5d3 based microchip-ksz9477-evb board Oleksij Rempel
2021-04-09 13:11 ` [PATCH v1 1/6] mci: atmel_mci: add PBL support Oleksij Rempel
2021-04-13  4:58   ` Sascha Hauer
2021-04-23 14:14     ` Oleksij Rempel
2021-05-03 11:39       ` Sascha Hauer
2021-04-09 13:11 ` [PATCH v1 2/6] ARM: at91: xload-mmc: add sama5d3_atmci_start_image() helper Oleksij Rempel
2021-04-13  5:01   ` Sascha Hauer
2021-04-09 13:11 ` [PATCH v1 3/6] ARM: at91: ddramc: add sama5d3_barebox_entry() handler Oleksij Rempel
2021-04-09 13:11 ` [PATCH v1 4/6] ARM: at91: add __sama5d3_stashed_bootrom_r4 helper Oleksij Rempel
2021-04-09 13:11 ` [PATCH v1 5/6] ARM: at91: add sama5d3_lowlevel_init() helpers Oleksij Rempel
2021-04-09 13:11 ` [PATCH v1 6/6] ARM: at91: sama5d3: add multiimage support for the microchip-ksz9477-evb Oleksij Rempel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox