[PATCH 1/2] net: designware: eqos: reset phy

[Sascha Hauer <s.hauer@pengutronix.de>]

The designware eqos DT binding has support for specifying reset GPIOs.
Add support for them.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 drivers/net/designware_eqos.c | 33 +++++++++++++++++++++++++++++++++
 drivers/of/of_gpio.c          |  7 +++++++
 2 files changed, 40 insertions(+)

diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
index d2baaeaf63..0321024169 100644
--- a/drivers/net/designware_eqos.c
+++ b/drivers/net/designware_eqos.c
@@ -8,9 +8,11 @@
 
 #include <common.h>
 #include <init.h>
+#include <gpio.h>
 #include <dma.h>
 #include <net.h>
 #include <of_net.h>
+#include <of_gpio.h>
 #include <linux/iopoll.h>
 #include <linux/time.h>
 #include <linux/sizes.h>
@@ -189,6 +191,33 @@ struct eqos_desc {
 
 #define MII_BUSY		(1 << 0)
 
+static int eqos_phy_reset(struct device_d *dev, struct eqos *eqos)
+{
+	int phy_reset;
+	int ret;
+	u32 delays[3] = { 0, 0, 0 };
+
+	phy_reset = of_get_named_gpio(dev->device_node, "snps,reset-gpio", 0);
+
+        if (!gpio_is_valid(phy_reset))
+		return 0;
+
+	ret = gpio_request(phy_reset, "phy-reset");
+	if (ret)
+		return ret;
+
+	of_property_read_u32_array(dev->device_node,
+				   "snps,reset-delays-us",
+				   delays, ARRAY_SIZE(delays));
+
+	gpio_direction_active(phy_reset, 0);
+	udelay(delays[1]);
+	gpio_set_active(phy_reset, 1);
+	udelay(delays[2]);
+
+	return 0;
+}
+
 static int eqos_mdio_wait_idle(struct eqos *eqos)
 {
 	u32 idle;
@@ -843,6 +872,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
 	if (ret)
 		return ret;
 
+	ret = eqos_phy_reset(dev, eqos);
+	if (ret)
+		return ret;
+
 	ret = mdiobus_register(miibus);
 	if (ret)
 		return ret;
diff --git a/drivers/of/of_gpio.c b/drivers/of/of_gpio.c
index 7cbeeaf69e..e1cafdc848 100644
--- a/drivers/of/of_gpio.c
+++ b/drivers/of/of_gpio.c
@@ -35,6 +35,13 @@ static void of_gpio_flags_quirks(struct device_node *np,
 		if (active_low)
 			*flags |= OF_GPIO_ACTIVE_LOW;
 	}
+
+	/* Legacy handling of stmmac's active-low PHY reset line */
+	if (IS_ENABLED(CONFIG_DRIVER_NET_DESIGNWARE_EQOS) &&
+	    !strcmp(propname, "snps,reset-gpio") &&
+	    of_property_read_bool(np, "snps,reset-active-low"))
+		*flags |= OF_GPIO_ACTIVE_LOW;
+
 }
 
 /**
-- 
2.29.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox