From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 5/7] ARM: Rockchip: rk3568 EVB: Add USB support
Date: Tue, 22 Jun 2021 08:47:09 +0200 [thread overview]
Message-ID: <20210622064711.14058-5-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20210622064711.14058-1-s.hauer@pengutronix.de>
Enable the USB nodes for the ports found on the rk3568 EVB board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/rk3568-evb1-v10.dts | 95 ++++++++++++++++++++++++++++++++
1 file changed, 95 insertions(+)
diff --git a/arch/arm/dts/rk3568-evb1-v10.dts b/arch/arm/dts/rk3568-evb1-v10.dts
index ca6f9c2803..91e2344195 100644
--- a/arch/arm/dts/rk3568-evb1-v10.dts
+++ b/arch/arm/dts/rk3568-evb1-v10.dts
@@ -87,6 +87,25 @@
regulator-off-in-suspend;
};
};
+
+ vcc5v0_otg: vcc5v0-otg-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_otg_en>;
+ regulator-name = "vcc5v0_otg";
+ };
+
+ vcc5v0_host: vcc5v0-host-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+ regulator-name = "vcc5v0_host";
+ regulator-always-on;
+ };
};
&gmac0 {
@@ -425,6 +444,16 @@
<0 RK_PA2 2 &pcfg_pull_none>;
};
};
+
+ usb {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ vcc5v0_otg_en: vcc5v0-otg-en {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&sdhci {
@@ -485,3 +514,69 @@
&uart2 {
status = "okay";
};
+
+&u2phy0_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy0_otg {
+ vbus-supply = <&vcc5v0_otg>;
+ status = "okay";
+};
+
+&u2phy1_host {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&u2phy1_otg {
+ phy-supply = <&vcc5v0_host>;
+ status = "okay";
+};
+
+&usb2phy0 {
+ status = "okay";
+};
+
+&usb2phy1 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd_dwc3 {
+ dr_mode = "otg";
+ extcon = <&usb2phy0>;
+};
+
+&usbdrd30 {
+ status = "okay";
+};
+
+&usbhost30 {
+ status = "okay";
+};
+
+&combphy0_us {
+ status = "okay";
+};
+
+&combphy1_usq {
+ status = "okay";
+};
+
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-06-22 6:48 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-22 6:47 [PATCH 1/7] usb: ehci: Handle clocks and phys Sascha Hauer
2021-06-22 6:47 ` [PATCH 2/7] phy: Rockchip: Add driver for usb2phy Sascha Hauer
2021-06-22 6:47 ` [PATCH 3/7] phy: rockchip: Add naneng-combphy support Sascha Hauer
2021-06-22 6:47 ` [PATCH 4/7] ARM: Rockchip: rk3568: Add USB nodes Sascha Hauer
2021-06-22 6:47 ` Sascha Hauer [this message]
2021-06-22 6:47 ` [PATCH 6/7] fixup! phy: Rockchip: Add driver for usb2phy Sascha Hauer
2021-06-22 6:54 ` Sascha Hauer
2021-06-22 6:47 ` [PATCH 7/7] fixup! phy: rockchip: Add naneng-combphy support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210622064711.14058-5-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox