* [PATCH v1 0/6] protonic: maintaining and new board
@ 2021-08-25 12:54 Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support Oleksij Rempel
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Oleksij Rempel @ 2021-08-25 12:54 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
This patch series contains fixes and updates for currently mainlined
protonic boards and one new board.
Please close one eye on the arch/arm/dts/imx6ull-jozacp.dtsi, it will be
reviewed and reworked on the kernel side.
Oleksij Rempel (2):
ARM: boards: protonic-imx6: enable deep-probe support
ARM: boards: protonic-imx6: use decode error values instead error
numbers.
Robin van der Gracht (2):
ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default
ARM: boards: protonic-imx6: Add support for jozacp board
arch/arm/boards/protonic-imx6/board.c | 109 +++-
.../protonic-imx6/flash-header-jozacp.imxcfg | 81 +++
arch/arm/boards/protonic-imx6/lowlevel.c | 20 +
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx6ull-jozacp.dts | 47 ++
arch/arm/dts/imx6ull-jozacp.dtsi | 525 ++++++++++++++++++
images/Makefile.imx | 2 +
7 files changed, 761 insertions(+), 26 deletions(-)
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-jozacp.imxcfg
create mode 100644 arch/arm/dts/imx6ull-jozacp.dts
create mode 100644 arch/arm/dts/imx6ull-jozacp.dtsi
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support
2021-08-25 12:54 [PATCH v1 0/6] protonic: maintaining and new board Oleksij Rempel
@ 2021-08-25 12:54 ` Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 2/4] ARM: boards: protonic-imx6: use decode error values instead error numbers Oleksij Rempel
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Oleksij Rempel @ 2021-08-25 12:54 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Enable deep-probe support and fix gpio dependency for the early probe.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/protonic-imx6/board.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index 9ded94b3b0..81e09a8d8b 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -5,6 +5,7 @@
#include <bbu.h>
#include <common.h>
+#include <deep-probe.h>
#include <environment.h>
#include <fcntl.h>
#include <gpio.h>
@@ -707,8 +708,17 @@ static int prt_imx6_get_id(struct prt_imx6_priv *priv)
{
struct gpio gpios_type[] = GPIO_HW_TYPE_ID;
struct gpio gpios_rev[] = GPIO_HW_REV_ID;
+ struct device_node *gpio_np = NULL;
int ret;
+ gpio_np = of_find_node_by_name(NULL, "gpio@20a0000");
+ if (!gpio_np)
+ return -ENODEV;
+
+ ret = of_device_ensure_probed(gpio_np);
+ if (ret)
+ return ret;
+
ret = gpio_array_to_id(gpios_type, ARRAY_SIZE(gpios_type), &priv->hw_id);
if (ret)
goto exit_get_id;
@@ -1071,6 +1081,7 @@ static const struct of_device_id prt_imx6_of_match[] = {
{ .compatible = "prt,prtwd3", .data = &prt_imx6_cfg_prtwd3 },
{ /* sentinel */ },
};
+BAREBOX_DEEP_PROBE_ENABLE(prt_imx6_of_match);
static struct driver_d prt_imx6_board_driver = {
.name = "board-protonic-imx6",
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v1 2/4] ARM: boards: protonic-imx6: use decode error values instead error numbers.
2021-08-25 12:54 [PATCH v1 0/6] protonic: maintaining and new board Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support Oleksij Rempel
@ 2021-08-25 12:54 ` Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 3/4] ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default Oleksij Rempel
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Oleksij Rempel @ 2021-08-25 12:54 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel
Current barebox version provides "%pe" support with error to string
conversion. So, let's use it.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/protonic-imx6/board.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index 81e09a8d8b..9a95495327 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -138,7 +138,7 @@ static int prt_imx6_read_rfid(struct prt_imx6_priv *priv, void *buf,
/* 0x6000 user storage in the RFID tag */
ret = i2c_read_reg(&cl, 0x6000 | I2C_ADDR_16_BIT, buf, size);
if (ret < 0) {
- dev_err(dev, "Failed to read the RFID: %i\n", ret);
+ dev_err(dev, "Failed to read the RFID: %pe\n", ERR_PTR(ret));
return ret;
}
@@ -404,7 +404,7 @@ static int prt_imx6_env_init(struct prt_imx6_priv *priv)
return 0;
exit_env_init:
- dev_err(dev, "Failed to set env: %i\n", ret);
+ dev_err(dev, "Failed to set env: %pe\n", ERR_PTR(ret));
return ret;
}
@@ -437,7 +437,7 @@ static int prt_imx6_bbu(struct prt_imx6_priv *priv)
return 0;
exit_bbu:
- dev_err(priv->dev, "Failed to register bbu: %i\n", ret);
+ dev_err(priv->dev, "Failed to register bbu: %pe\n", ERR_PTR(ret));
return ret;
}
@@ -510,7 +510,7 @@ static int prt_imx6_yaco_set_kvg_power_mode(struct prt_imx6_priv *priv,
return 0;
exit_yaco_set_kvg_power_mode:
- dev_err(dev, "Failed to set YaCO pw mode: %i", ret);
+ dev_err(dev, "Failed to set YaCO pw mode: %pe", ERR_PTR(ret));
return ret;
}
@@ -679,7 +679,7 @@ free_eeprom:
free_alias:
kfree(alias);
exit_error:
- dev_err(priv->dev, "Failed to apply fixup: %i\n", ret);
+ dev_err(priv->dev, "Failed to apply fixup: %pe\n", ERR_PTR(ret));
return ret;
}
@@ -700,7 +700,7 @@ static int prt_imx6_of_fixup(struct device_node *root, void *data)
return 0;
exit_of_fixups:
- dev_err(priv->dev, "Failed to apply OF fixups: %i\n", ret);
+ dev_err(priv->dev, "Failed to apply OF fixups: %pe\n", ERR_PTR(ret));
return ret;
}
@@ -729,7 +729,7 @@ static int prt_imx6_get_id(struct prt_imx6_priv *priv)
return 0;
exit_get_id:
- dev_err(priv->dev, "Failed to read gpio ID: %i\n", ret);
+ dev_err(priv->dev, "Failed to read gpio ID: %pe\n", ERR_PTR(ret));
return ret;
}
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v1 3/4] ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default
2021-08-25 12:54 [PATCH v1 0/6] protonic: maintaining and new board Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 2/4] ARM: boards: protonic-imx6: use decode error values instead error numbers Oleksij Rempel
@ 2021-08-25 12:54 ` Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 4/4] ARM: boards: protonic-imx6: Add support for jozacp board Oleksij Rempel
2021-10-04 11:52 ` [PATCH v1 0/6] protonic: maintaining and new board Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Oleksij Rempel @ 2021-08-25 12:54 UTC (permalink / raw)
To: barebox; +Cc: Robin van der Gracht, Oleksij Rempel
From: Robin van der Gracht <robin@protonic.nl>
This product has physical buttons. When a certain combination is pressed,
the usb check should be performed otherwise it can be skipped to allow
faster booting.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/protonic-imx6/board.c | 61 +++++++++++++++++++--------
1 file changed, 43 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index 9a95495327..cacbdafa31 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -84,6 +84,7 @@ struct prt_imx6_priv {
const char *name;
struct poller_async poller;
unsigned int usb_delay;
+ unsigned int no_usb_check;
};
struct prti6q_rfid_contents {
@@ -380,16 +381,20 @@ static int prt_imx6_env_init(struct prt_imx6_priv *priv)
if (ret)
goto exit_env_init;
- if (dcfg->flags & PRT_IMX6_USB_LONG_DELAY)
- priv->usb_delay = 4;
- else
- priv->usb_delay = 1;
-
- /* the usb_delay value is used for poller_call_async() */
- delay = basprintf("%d", priv->usb_delay);
- ret = setenv("global.autoboot_timeout", delay);
- if (ret)
- goto exit_env_init;
+ if (priv->no_usb_check) {
+ set_autoboot_state(AUTOBOOT_BOOT);
+ } else {
+ if (dcfg->flags & PRT_IMX6_USB_LONG_DELAY)
+ priv->usb_delay = 4;
+ else
+ priv->usb_delay = 1;
+
+ /* the usb_delay value is used for poller_call_async() */
+ delay = basprintf("%d", priv->usb_delay);
+ ret = setenv("global.autoboot_timeout", delay);
+ if (ret)
+ goto exit_env_init;
+ }
if (dcfg->flags & PRT_IMX6_BOOTCHOOSER)
bootsrc = "bootchooser";
@@ -458,14 +463,16 @@ static int prt_imx6_devices_init(void)
prt_imx6_env_init(priv);
- ret = poller_async_register(&priv->poller, "usb-boot");
- if (ret) {
- dev_err(priv->dev, "can't setup poller\n");
- return ret;
- }
+ if (!priv->no_usb_check) {
+ ret = poller_async_register(&priv->poller, "usb-boot");
+ if (ret) {
+ dev_err(priv->dev, "can't setup poller\n");
+ return ret;
+ }
- poller_call_async(&priv->poller, priv->usb_delay * SECOND,
- &prt_imx6_check_usb_boot, priv);
+ poller_call_async(&priv->poller, priv->usb_delay * SECOND,
+ &prt_imx6_check_usb_boot, priv);
+ }
return 0;
}
@@ -618,6 +625,22 @@ static int prt_imx6_init_kvg_yaco(struct prt_imx6_priv *priv)
return prt_imx6_init_kvg_power(priv, PW_MODE_KVG_WITH_YACO);
}
+#define GPIO_KEY_F6 (0xe0 + 5)
+#define GPIO_KEY_CYCLE (0xe0 + 2)
+
+static int prt_imx6_init_prtvt7(struct prt_imx6_priv *priv)
+{
+ /* This function relies heavely on the gpio-pca9539 driver */
+
+ gpio_direction_input(GPIO_KEY_F6);
+ gpio_direction_input(GPIO_KEY_CYCLE);
+
+ if (gpio_get_value(GPIO_KEY_CYCLE) && gpio_get_value(GPIO_KEY_F6))
+ priv->no_usb_check = 1;
+
+ return 0;
+}
+
static int prt_imx6_rfid_fixup(struct prt_imx6_priv *priv,
struct device_node *root)
{
@@ -1031,7 +1054,9 @@ static const struct prt_machine_data prt_imx6_cfg_prtvt7[] = {
.i2c_addr = 0x51,
.i2c_adapter = 0,
.emmc_usdhc = 2,
- .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
+ .init = prt_imx6_init_prtvt7,
+ .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER |
+ PRT_IMX6_USB_LONG_DELAY,
}, {
.hw_id = UINT_MAX
},
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v1 4/4] ARM: boards: protonic-imx6: Add support for jozacp board
2021-08-25 12:54 [PATCH v1 0/6] protonic: maintaining and new board Oleksij Rempel
` (2 preceding siblings ...)
2021-08-25 12:54 ` [PATCH v1 3/4] ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default Oleksij Rempel
@ 2021-08-25 12:54 ` Oleksij Rempel
2021-10-04 11:52 ` [PATCH v1 0/6] protonic: maintaining and new board Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Oleksij Rempel @ 2021-08-25 12:54 UTC (permalink / raw)
To: barebox; +Cc: Robin van der Gracht, Oleksij Rempel
From: Robin van der Gracht <robin@protonic.nl>
The jozacp is an industrial imx6ull based board with ethernet,
wifi and zigbee.
Note: this patch includes WIP version of the devicetree:
arch/arm/dts/imx6ull-jozacp.dtsi. This devicetree will be reworked,
mainlined to the kernel and at the end replaced with the kernel
mainline version.
Signed-off-by: Robin van der Gracht <robin@protonic.nl>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/protonic-imx6/board.c | 23 +
| 81 +++
arch/arm/boards/protonic-imx6/lowlevel.c | 20 +
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx6ull-jozacp.dts | 47 ++
arch/arm/dts/imx6ull-jozacp.dtsi | 525 ++++++++++++++++++
images/Makefile.imx | 2 +
7 files changed, 700 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-jozacp.imxcfg
create mode 100644 arch/arm/dts/imx6ull-jozacp.dts
create mode 100644 arch/arm/dts/imx6ull-jozacp.dtsi
diff --git a/arch/arm/boards/protonic-imx6/board.c b/arch/arm/boards/protonic-imx6/board.c
index cacbdafa31..9b2a00c6c3 100644
--- a/arch/arm/boards/protonic-imx6/board.c
+++ b/arch/arm/boards/protonic-imx6/board.c
@@ -51,6 +51,8 @@ enum {
HW_TYPE_LANMCU = 23,
HW_TYPE_PLYBAS = 24,
HW_TYPE_VICTGO = 28,
+ HW_TYPE_JOZACP = 30,
+ HW_TYPE_JOZACPP = 31,
};
enum prt_imx6_kvg_pw_mode {
@@ -1088,6 +1090,26 @@ static const struct prt_machine_data prt_imx6_cfg_prtwd3[] = {
},
};
+static const struct prt_machine_data prt_imx6_cfg_jozacp[] = {
+ {
+ .hw_id = HW_TYPE_JOZACP,
+ .hw_rev = 1,
+ .i2c_addr = 0x51,
+ .i2c_adapter = 0,
+ .emmc_usdhc = 0,
+ .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
+ }, {
+ .hw_id = HW_TYPE_JOZACPP,
+ .hw_rev = 1,
+ .i2c_addr = 0x51,
+ .i2c_adapter = 0,
+ .emmc_usdhc = 0,
+ .flags = PRT_IMX6_BOOTSRC_EMMC | PRT_IMX6_BOOTCHOOSER,
+ }, {
+ .hw_id = UINT_MAX
+ },
+};
+
static const struct of_device_id prt_imx6_of_match[] = {
{ .compatible = "alt,alti6p", .data = &prt_imx6_cfg_alti6p },
{ .compatible = "kvg,victgo", .data = &prt_imx6_cfg_victgo },
@@ -1104,6 +1126,7 @@ static const struct of_device_id prt_imx6_of_match[] = {
{ .compatible = "prt,prtvt7", .data = &prt_imx6_cfg_prtvt7 },
{ .compatible = "prt,prtwd2", .data = &prt_imx6_cfg_prtwd2 },
{ .compatible = "prt,prtwd3", .data = &prt_imx6_cfg_prtwd3 },
+ { .compatible = "joz,jozacp", .data = &prt_imx6_cfg_jozacp },
{ /* sentinel */ },
};
BAREBOX_DEEP_PROBE_ENABLE(prt_imx6_of_match);
--git a/arch/arm/boards/protonic-imx6/flash-header-jozacp.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-jozacp.imxcfg
new file mode 100644
index 0000000000..ec9fb84108
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-jozacp.imxcfg
@@ -0,0 +1,81 @@
+soc imx6
+loadaddr 0x80000000
+ivtofs 0x400
+
+#include "ddr3-defines.imxcfg"
+#include "padsetup-ul.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 0x00000047 /* MDASP_512MIB */
+wm 32 0x021b0000 MDCTL_2G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 0x00000117 /* MPODTCTRL_ODT_120 */
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b0850 0x40404040 /* For now set all to 50%. */
+
+/* MPWLDECTRL0 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Enable all clocks */
+wm 32 0x020c4068 0xffffffff
+wm 32 0x020c406c 0xffffffff
+wm 32 0x020c4070 0xffffffff
+wm 32 0x020c4074 0xffffffff
+wm 32 0x020c4078 0xffffffff
+wm 32 0x020c407c 0xffffffff
+wm 32 0x020c4080 0xffffffff
diff --git a/arch/arm/boards/protonic-imx6/lowlevel.c b/arch/arm/boards/protonic-imx6/lowlevel.c
index f5784cc6b1..ef8e7016d1 100644
--- a/arch/arm/boards/protonic-imx6/lowlevel.c
+++ b/arch/arm/boards/protonic-imx6/lowlevel.c
@@ -24,6 +24,7 @@ extern char __dtb_z_imx6dl_vicut1_start[];
extern char __dtb_z_imx6qp_prtwd3_start[];
extern char __dtb_z_imx6qp_vicutp_start[];
extern char __dtb_z_imx6ul_prti6g_start[];
+extern char __dtb_z_imx6ull_jozacp_start[];
ENTRY_FUNCTION(start_imx6q_prti6q, r0, r1, r2)
{
@@ -189,3 +190,22 @@ ENTRY_FUNCTION(start_imx6ul_prti6g, r0, r1, r2)
imx6ul_barebox_entry(fdt);
}
+
+ENTRY_FUNCTION(start_imx6ull_jozacp, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6ul_cpu_lowlevel_init();
+
+ /* Disconnect USDHC2 from SD card */
+ writel(0x5, 0x020e0178);
+ writel(0x5, 0x020e017c);
+ writel(0x5, 0x020e0180);
+ writel(0x5, 0x020e0184);
+ writel(0x5, 0x020e0188);
+ writel(0x5, 0x020e018c);
+
+ fdt = __dtb_z_imx6ull_jozacp_start + get_runtime_offset();
+
+ imx6ul_barebox_entry(fdt);
+}
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index ffa9fe88c1..2acdb08483 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -91,7 +91,8 @@ lwl-$(CONFIG_MACH_PROTONIC_IMX6) += \
imx6dl-vicut1.dtb.o \
imx6qp-prtwd3.dtb.o \
imx6qp-vicutp.dtb.o \
- imx6ul-prti6g.dtb.o
+ imx6ul-prti6g.dtb.o \
+ imx6ull-jozacp.dtb.o
lwl-$(CONFIG_MACH_PROTONIC_IMX8M) += imx8mm-prt8mm.dtb.o
lwl-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
lwl-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
diff --git a/arch/arm/dts/imx6ull-jozacp.dts b/arch/arm/dts/imx6ull-jozacp.dts
new file mode 100644
index 0000000000..f41028455a
--- /dev/null
+++ b/arch/arm/dts/imx6ull-jozacp.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/dts-v1/;
+
+#include "imx6ull-jozacp.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+
+ environment@0 {
+ compatible = "barebox,environment";
+ device-path = &usdhc1, "partname:barebox-environment";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address will be determined by the bootloader */
+ ramoops {
+ compatible = "ramoops";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ /* Address will be determined by the bootloader */
+ ramoops {
+ compatible = "ramoops";
+ };
+ };
+};
+
+&usdhc1 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@40000 {
+ label = "barebox-environment";
+ reg = <0x40000 0x80000>;
+ };
+};
diff --git a/arch/arm/dts/imx6ull-jozacp.dtsi b/arch/arm/dts/imx6ull-jozacp.dtsi
new file mode 100644
index 0000000000..f7d35684f8
--- /dev/null
+++ b/arch/arm/dts/imx6ull-jozacp.dtsi
@@ -0,0 +1,525 @@
+/*
+ * Copyright (C) 2020 Protonic Holland
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include <arm/imx6ull.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "JOZ Access Point";
+ compatible = "joz,jozacp", "fsl,imx6ull";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_5v: 5v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: 3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <®_5v>;
+ regulator-always-on;
+ };
+
+ reg_1p4v: 1p4-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-1P4V";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <1400000>;
+ vin-supply = <®_5v>;
+ regulator-always-on;
+ };
+
+ reg_vbus: vbus-regulator {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vbus>;
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <®_5v>;
+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
+
+ usdhc2_pwrseq: usdhc2-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan0_reg_on>;
+ reset-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+ };
+
+ pwm_leds {
+ compatible = "pwm-leds";
+
+ rgb1_red {
+ label = "pwm:red:rgb1";
+ pwms = <&pwm1 0 10000000 0>;
+ max-brightness = <255>;
+ };
+
+ rgb1_green {
+ label = "pwm:green:rgb1";
+ pwms = <&pwm3 0 10000000 0>;
+ max-brightness = <255>;
+ };
+
+ rgb1_blue {
+ label = "pwm:blue:rgb1";
+ pwms = <&pwm5 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ rgb2_red {
+ label = "pwm:red:rgb2";
+ pwms = <&pwm2 0 10000000 0>;
+ max-brightness = <255>;
+ };
+
+ rgb2_green {
+ label = "pwm:green:rgb2";
+ pwms = <&pwm4 0 10000000 0>;
+ max-brightness = <255>;
+ linux,default-trigger = "netdev";
+ };
+
+ rgb2_blue {
+ label = "pwm:blue:rgb2";
+ pwms = <&pwm6 0 10000000 0>;
+ max-brightness = <255>;
+ };
+ };
+};
+
+&cpu0 {
+ clock-frequency = <792000000>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* HW Revision */
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0
+
+ /* HW ID */
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0
+
+ /* Digital inputs */
+ MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x11000
+ MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0x11000
+ MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x11000
+ MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x11000
+ MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x11000
+
+ /* Isolated outputs */
+ MX6UL_PAD_UART2_TX_DATA__GPIO1_IO20 0x01020
+ MX6UL_PAD_UART2_RX_DATA__GPIO1_IO21 0x01020
+ MX6UL_PAD_UART2_RTS_B__GPIO1_IO23 0x01020
+ MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x01020
+ MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x01020
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b0b0
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001f8b1
+ MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001f8b1
+ MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA00__PWM1_OUT 0x01010
+ >;
+ };
+
+ pinctrl_pwm2: pwm2-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA01__PWM2_OUT 0x01010
+ >;
+ };
+
+ pinctrl_pwm3: pwm3-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA02__PWM3_OUT 0x01010
+ >;
+ };
+
+ pinctrl_pwm4: pwm4-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA03__PWM4_OUT 0x01010
+ >;
+ };
+
+ pinctrl_pwm5: pwm5-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA18__PWM5_OUT 0x01010
+ >;
+ };
+
+ pinctrl_pwm6: pwm6-grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_DATA19__PWM6_OUT 0x01010
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DATA04__UART2_DCE_TX 0x1b0b0
+ MX6UL_PAD_NAND_DATA05__UART2_DCE_RX 0x1b0b0
+ MX6UL_PAD_NAND_DATA06__GPIO4_IO08 0x1b0b0
+ MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6UL_PAD_LCD_CLK__UART4_DCE_TX 0x1b0b0
+ MX6UL_PAD_LCD_ENABLE__UART4_DCE_RX 0x1b0b0
+ MX6UL_PAD_LCD_HSYNC__UART4_DCE_CTS 0x1b0b0
+ MX6UL_PAD_LCD_VSYNC__UART4_DCE_RTS 0x1b0b0
+ MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x1b0b0
+ >;
+ };
+
+ pinctrl_vbus: vbus0grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0x030b0
+ >;
+ };
+
+ pinctrl_usbotg1: usbotg1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO01__USB_OTG1_OC 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WP_B__USDHC1_RESET_B 0x17099
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x1f099
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10099
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17099
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17099
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17099
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17099
+ MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17099
+ MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17099
+ MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17099
+ MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17099
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x100b9
+ MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x170b9
+ MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x170b9
+ MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x170b9
+ MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x170b9
+ MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_wlan0_reg_on: wlan0-regon-grp0 {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA04__GPIO4_IO25 0x03020
+ >;
+ };
+
+ pinctrl_wlan0_host_wake: wlan0-host_wake-grp0 {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x1b0b0
+ >;
+ };
+
+ pinctrl_bt0_reg_on: bt0-regon-grp0 {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA07__GPIO4_IO28 0x03020
+ >;
+ };
+
+ pinctrl_bt0_host_wake: bt0-host_wake-grp0 {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA06__GPIO4_IO27 0x1b0b0
+ >;
+ };
+
+ pinctrl_etnphy0_rst: etnphy-rstgrp-grp0 {
+ fsl,pins = <
+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x038b0
+ >;
+ };
+
+ pinctrl_etnphy0_int: etnphy-intgrp-grp0 {
+ fsl,pins = <
+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x170b0
+ >;
+ };
+};
+
+&iomuxc_snvs {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_snvs_hog>;
+
+ pinctrl_snvs_hog: snvs-hog-grp {
+ fsl,pins = <
+ /* Digital outputs */
+ MX6ULL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x00020
+ MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x00020
+ MX6ULL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x00020
+ MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x00020
+ MX6ULL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x00020
+
+ /* Digital outputs fault feedback */
+ MX6ULL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x17000
+ MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17000
+ MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x17000
+ MX6ULL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x17000
+ MX6ULL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x17000
+ >;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1 &pinctrl_etnphy0_rst>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ phy-reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <11>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
+ interrupt-parent = <&gpio1>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&snvs_rtc {
+ status = "disabled";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ cts-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
+ rts-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+ status = "disabled";
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bt0_reg_on &pinctrl_bt0_host_wake>;
+ host-wakeup-gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ vbat-supply = <®_3p3v>;
+ vddio-supply = <®_3p3v>;
+ max-speed = <921600>;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ dtr-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ uart-has-rtscts;
+ status = "okay";
+};
+
+&usbotg1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg1>;
+ vbus-supply = <®_vbus>;
+ dr_mode = "host";
+ over-current-active-low;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ vmmc-supply = <®_3p3v>;
+ bus-width = <8>;
+ no-1-8-v;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
+ bus-width = <4>;
+ no-1-8-v;
+ non-removable;
+ pm-ignore-notify;
+ status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan0_host_wake>;
+ //interrupt-parent = <&gpio4>;
+ //interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ //interrupt-names = "host-wake";
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&pwm4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm4>;
+ status = "okay";
+};
+
+&pwm5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm5>;
+ status = "okay";
+};
+
+&pwm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm6>;
+ status = "okay";
+};
diff --git a/images/Makefile.imx b/images/Makefile.imx
index dd927aba55..2baca6b4ea 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -329,6 +329,8 @@ $(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6qp_prtwd3, proto
$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6qp_vicutp, protonic-imx6/flash-header-vicutp, protonic-vicutp)
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6ull_jozacp, protonic-imx6/flash-header-jozacp, protonic-jozacp)
+
$(call build_imx_habv4img, CONFIG_MACH_KONTRON_SAMX6I, start_imx6q_samx6i, kontron-samx6i/flash-header-samx6i-quad, imx6q-samx6i)
$(call build_imx_habv4img, CONFIG_MACH_KONTRON_SAMX6I, start_imx6dl_samx6i, kontron-samx6i/flash-header-samx6i-duallite, imx6dl-samx6i)
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v1 0/6] protonic: maintaining and new board
2021-08-25 12:54 [PATCH v1 0/6] protonic: maintaining and new board Oleksij Rempel
` (3 preceding siblings ...)
2021-08-25 12:54 ` [PATCH v1 4/4] ARM: boards: protonic-imx6: Add support for jozacp board Oleksij Rempel
@ 2021-10-04 11:52 ` Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2021-10-04 11:52 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox
On Wed, Aug 25, 2021 at 02:54:26PM +0200, Oleksij Rempel wrote:
> This patch series contains fixes and updates for currently mainlined
> protonic boards and one new board.
>
> Please close one eye on the arch/arm/dts/imx6ull-jozacp.dtsi, it will be
> reviewed and reworked on the kernel side.
>
> Oleksij Rempel (2):
> ARM: boards: protonic-imx6: enable deep-probe support
> ARM: boards: protonic-imx6: use decode error values instead error
> numbers.
>
> Robin van der Gracht (2):
> ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default
> ARM: boards: protonic-imx6: Add support for jozacp board
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-10-04 11:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-25 12:54 [PATCH v1 0/6] protonic: maintaining and new board Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 1/4] ARM: boards: protonic-imx6: enable deep-probe support Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 2/4] ARM: boards: protonic-imx6: use decode error values instead error numbers Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 3/4] ARM: boards: protonic-imx6: Skip usb check on prtvt7 by default Oleksij Rempel
2021-08-25 12:54 ` [PATCH v1 4/4] ARM: boards: protonic-imx6: Add support for jozacp board Oleksij Rempel
2021-10-04 11:52 ` [PATCH v1 0/6] protonic: maintaining and new board Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox