* [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
@ 2021-08-31 15:32 Ahmad Fatoum
2021-09-02 7:00 ` Rouven Czerwinski
2021-10-04 11:26 ` Sascha Hauer
0 siblings, 2 replies; 6+ messages in thread
From: Ahmad Fatoum @ 2021-08-31 15:32 UTC (permalink / raw)
To: barebox; +Cc: Ahmad Fatoum
The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
Fix networking for them by only falling back to the mdio node name when a
child node with the correct compatible could not be found.
Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/net/designware_eqos.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
index f83ec127143c..5eee844e289a 100644
--- a/drivers/net/designware_eqos.c
+++ b/drivers/net/designware_eqos.c
@@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
{
+ struct device_node *np = dev->device_node;
struct mii_bus *miibus;
struct resource *iores;
struct eqos *eqos;
@@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
miibus->read = eqos_mdio_read;
miibus->write = eqos_mdio_write;
miibus->priv = eqos;
- miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
+
+ miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
+ if (!miibus->dev.device_node)
+ miibus->dev.device_node = of_get_child_by_name(np, "mdio");
ret = eqos_init(dev, eqos);
if (ret)
--
2.30.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
2021-08-31 15:32 [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards Ahmad Fatoum
@ 2021-09-02 7:00 ` Rouven Czerwinski
2021-10-04 11:26 ` Sascha Hauer
1 sibling, 0 replies; 6+ messages in thread
From: Rouven Czerwinski @ 2021-09-02 7:00 UTC (permalink / raw)
To: Ahmad Fatoum, barebox
Hi,
On Tue, 2021-08-31 at 17:32 +0200, Ahmad Fatoum wrote:
> The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
> since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
>
> Fix networking for them by only falling back to the mdio node name when a
> child node with the correct compatible could not be found.
>
> Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/net/designware_eqos.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
> index f83ec127143c..5eee844e289a 100644
> --- a/drivers/net/designware_eqos.c
> +++ b/drivers/net/designware_eqos.c
> @@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
>
> int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
> {
> + struct device_node *np = dev->device_node;
> struct mii_bus *miibus;
> struct resource *iores;
> struct eqos *eqos;
> @@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
> miibus->read = eqos_mdio_read;
> miibus->write = eqos_mdio_write;
> miibus->priv = eqos;
> - miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
> +
> + miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
> + if (!miibus->dev.device_node)
> + miibus->dev.device_node = of_get_child_by_name(np, "mdio");
>
> ret = eqos_init(dev, eqos);
> if (ret)
Reviewed-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Regards,
Rouven
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
2021-08-31 15:32 [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards Ahmad Fatoum
2021-09-02 7:00 ` Rouven Czerwinski
@ 2021-10-04 11:26 ` Sascha Hauer
2021-10-04 11:39 ` Ahmad Fatoum
1 sibling, 1 reply; 6+ messages in thread
From: Sascha Hauer @ 2021-10-04 11:26 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
On Tue, Aug 31, 2021 at 05:32:14PM +0200, Ahmad Fatoum wrote:
> The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
> since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
>
> Fix networking for them by only falling back to the mdio node name when a
> child node with the correct compatible could not be found.
>
> Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> drivers/net/designware_eqos.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
> index f83ec127143c..5eee844e289a 100644
> --- a/drivers/net/designware_eqos.c
> +++ b/drivers/net/designware_eqos.c
> @@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
>
> int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
> {
> + struct device_node *np = dev->device_node;
> struct mii_bus *miibus;
> struct resource *iores;
> struct eqos *eqos;
> @@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
> miibus->read = eqos_mdio_read;
> miibus->write = eqos_mdio_write;
> miibus->priv = eqos;
> - miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
> +
> + miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
> + if (!miibus->dev.device_node)
> + miibus->dev.device_node = of_get_child_by_name(np, "mdio");
Do we need this fallback? I think I introduced ed8c7bdf8592 for the
rk3568, which also should work without the fallback.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
2021-10-04 11:26 ` Sascha Hauer
@ 2021-10-04 11:39 ` Ahmad Fatoum
2021-11-05 7:51 ` Ahmad Fatoum
0 siblings, 1 reply; 6+ messages in thread
From: Ahmad Fatoum @ 2021-10-04 11:39 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hello Sascha,
On 04.10.21 13:26, Sascha Hauer wrote:
> On Tue, Aug 31, 2021 at 05:32:14PM +0200, Ahmad Fatoum wrote:
>> The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
>> since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
>>
>> Fix networking for them by only falling back to the mdio node name when a
>> child node with the correct compatible could not be found.
>>
>> Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>> ---
>> drivers/net/designware_eqos.c | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
>> index f83ec127143c..5eee844e289a 100644
>> --- a/drivers/net/designware_eqos.c
>> +++ b/drivers/net/designware_eqos.c
>> @@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
>>
>> int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
>> {
>> + struct device_node *np = dev->device_node;
>> struct mii_bus *miibus;
>> struct resource *iores;
>> struct eqos *eqos;
>> @@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
>> miibus->read = eqos_mdio_read;
>> miibus->write = eqos_mdio_write;
>> miibus->priv = eqos;
>> - miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
>> +
>> + miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
>> + if (!miibus->dev.device_node)
>> + miibus->dev.device_node = of_get_child_by_name(np, "mdio");
>
> Do we need this fallback? I think I introduced ed8c7bdf8592 for the
> rk3568, which also should work without the fallback.
Linux driver uses "mdio" node name for snps,dwc-qos-ethernet-4.10 and looks
at compatible otherwise. That's why I chose to keep support for both.
>
> Sascha
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
2021-10-04 11:39 ` Ahmad Fatoum
@ 2021-11-05 7:51 ` Ahmad Fatoum
2021-11-05 9:20 ` Sascha Hauer
0 siblings, 1 reply; 6+ messages in thread
From: Ahmad Fatoum @ 2021-11-05 7:51 UTC (permalink / raw)
To: Sascha Hauer; +Cc: barebox
Hello Sascha,
On 04.10.21 13:39, Ahmad Fatoum wrote:
> Hello Sascha,
>
> On 04.10.21 13:26, Sascha Hauer wrote:
>> On Tue, Aug 31, 2021 at 05:32:14PM +0200, Ahmad Fatoum wrote:
>>> The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
>>> since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
>>>
>>> Fix networking for them by only falling back to the mdio node name when a
>>> child node with the correct compatible could not be found.
>>>
>>> Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
>>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
>>> ---
>>> drivers/net/designware_eqos.c | 6 +++++-
>>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
>>> index f83ec127143c..5eee844e289a 100644
>>> --- a/drivers/net/designware_eqos.c
>>> +++ b/drivers/net/designware_eqos.c
>>> @@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
>>>
>>> int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
>>> {
>>> + struct device_node *np = dev->device_node;
>>> struct mii_bus *miibus;
>>> struct resource *iores;
>>> struct eqos *eqos;
>>> @@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
>>> miibus->read = eqos_mdio_read;
>>> miibus->write = eqos_mdio_write;
>>> miibus->priv = eqos;
>>> - miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
>>> +
>>> + miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
>>> + if (!miibus->dev.device_node)
>>> + miibus->dev.device_node = of_get_child_by_name(np, "mdio");
>>
>> Do we need this fallback? I think I introduced ed8c7bdf8592 for the
>> rk3568, which also should work without the fallback.
>
> Linux driver uses "mdio" node name for snps,dwc-qos-ethernet-4.10 and looks
> at compatible otherwise. That's why I chose to keep support for both.
STM32MP1 support in master is broken. Can this be cherry picked?
Thanks,
Ahmad
>
>>
>> Sascha
>>
>
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards
2021-11-05 7:51 ` Ahmad Fatoum
@ 2021-11-05 9:20 ` Sascha Hauer
0 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2021-11-05 9:20 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox
On Fri, Nov 05, 2021 at 08:51:01AM +0100, Ahmad Fatoum wrote:
> Hello Sascha,
>
> On 04.10.21 13:39, Ahmad Fatoum wrote:
> > Hello Sascha,
> >
> > On 04.10.21 13:26, Sascha Hauer wrote:
> >> On Tue, Aug 31, 2021 at 05:32:14PM +0200, Ahmad Fatoum wrote:
> >>> The STM32MP1 boards call their mdio subnode mdio0, which is now skipped
> >>> since ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node").
> >>>
> >>> Fix networking for them by only falling back to the mdio node name when a
> >>> child node with the correct compatible could not be found.
> >>>
> >>> Fixes: ed8c7bdf8592 ("net: designware: eqos: set mdio bus device node")
> >>> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> >>> ---
> >>> drivers/net/designware_eqos.c | 6 +++++-
> >>> 1 file changed, 5 insertions(+), 1 deletion(-)
> >>>
> >>> diff --git a/drivers/net/designware_eqos.c b/drivers/net/designware_eqos.c
> >>> index f83ec127143c..5eee844e289a 100644
> >>> --- a/drivers/net/designware_eqos.c
> >>> +++ b/drivers/net/designware_eqos.c
> >>> @@ -824,6 +824,7 @@ static void eqos_probe_dt(struct device_d *dev, struct eqos *eqos)
> >>>
> >>> int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
> >>> {
> >>> + struct device_node *np = dev->device_node;
> >>> struct mii_bus *miibus;
> >>> struct resource *iores;
> >>> struct eqos *eqos;
> >>> @@ -862,7 +863,10 @@ int eqos_probe(struct device_d *dev, const struct eqos_ops *ops, void *priv)
> >>> miibus->read = eqos_mdio_read;
> >>> miibus->write = eqos_mdio_write;
> >>> miibus->priv = eqos;
> >>> - miibus->dev.device_node = of_get_child_by_name(dev->device_node, "mdio");
> >>> +
> >>> + miibus->dev.device_node = of_get_compatible_child(np, "snps,dwmac-mdio");
> >>> + if (!miibus->dev.device_node)
> >>> + miibus->dev.device_node = of_get_child_by_name(np, "mdio");
> >>
> >> Do we need this fallback? I think I introduced ed8c7bdf8592 for the
> >> rk3568, which also should work without the fallback.
> >
> > Linux driver uses "mdio" node name for snps,dwc-qos-ethernet-4.10 and looks
> > at compatible otherwise. That's why I chose to keep support for both.
>
> STM32MP1 support in master is broken. Can this be cherry picked?
Just did that.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2021-11-05 9:22 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-31 15:32 [PATCH master] net: designware: eqos: fix MDIO regression for STM32MP1 boards Ahmad Fatoum
2021-09-02 7:00 ` Rouven Czerwinski
2021-10-04 11:26 ` Sascha Hauer
2021-10-04 11:39 ` Ahmad Fatoum
2021-11-05 7:51 ` Ahmad Fatoum
2021-11-05 9:20 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox