mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: Re: [PATCH 7/9] RISC-V: don't use x8/s0/fp in assembly
Date: Mon, 10 Jan 2022 13:59:46 +0300	[thread overview]
Message-ID: <20220110135946.772f42aea56fedc19c68c2d8@gmail.com> (raw)
In-Reply-To: <6136d698-30cd-12a7-58e4-a6598ff3a86e@pengutronix.de>

On Sat, 8 Jan 2022 19:25:03 +0100
Ahmad Fatoum <a.fatoum@pengutronix.de> wrote:

Hi Ahmad!

> Hello Antony,
> 
> On 08.01.22 18:15, Ahmad Fatoum wrote:
> > Free up the register to allow building a configuration with x8/s0 used
> > as the frame pointer.
> > 
> > Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> > ---
> >  arch/riscv/include/asm/debug_ll_litex.h   | 12 +++---
> >  arch/riscv/include/asm/debug_ll_ns16550.h |  8 ++--
> >  arch/riscv/include/asm/riscv_nmon.h       | 50 +++++++++++------------
> 
> I just bumped the s register: s2 -> s3, s1 -> s2, s0 -> s1 to
> clear s0. Is that ok?

I suppose that there is no problem if nmon still works under qemu.


> >  3 files changed, 35 insertions(+), 35 deletions(-)
> > 
> > diff --git a/arch/riscv/include/asm/debug_ll_litex.h b/arch/riscv/include/asm/debug_ll_litex.h
> > index 2fcdd9b0ec3e..295477fc1010 100644
> > --- a/arch/riscv/include/asm/debug_ll_litex.h
> > +++ b/arch/riscv/include/asm/debug_ll_litex.h
> > @@ -90,11 +90,11 @@ static inline void PUTC_LL(char ch)
> >  	li	t0, DEBUG_LL_UART_ADDR
> >  
> >  	/* get line status and check for data present */
> > -	lbu	s0, UART_RXEMPTY(t0)
> > -	bnez    s0, 243f
> > -	li	s0, 1
> > +	lbu	s1, UART_RXEMPTY(t0)
> > +	bnez    s1, 243f
> > +	li	s1, 1
> >  	j	244f
> > -243:	li	s0, 0
> > +243:	li	s1, 0
> >  244:	nop
> >  #endif /* CONFIG_DEBUG_LL */
> >  .endm
> > @@ -109,10 +109,10 @@ static inline void PUTC_LL(char ch)
> >  	debug_ll_tstc
> >  
> >  	/* try again */
> > -	beqz	s0, 204b
> > +	beqz	s1, 204b
> >  
> >  	/* read a character */
> > -	lb	s0, UART_RXTX(t0)
> > +	lb	s1, UART_RXTX(t0)
> >  	li      t1, UART_EV_RX
> >  	sb	t1, UART_EV_PENDING(t0)
> >  
> > diff --git a/arch/riscv/include/asm/debug_ll_ns16550.h b/arch/riscv/include/asm/debug_ll_ns16550.h
> > index e208ef4fb1e1..47f0be328ce8 100644
> > --- a/arch/riscv/include/asm/debug_ll_ns16550.h
> > +++ b/arch/riscv/include/asm/debug_ll_ns16550.h
> > @@ -143,8 +143,8 @@ static inline void debug_ll_ns16550_init(void)
> >  	li      t0, DEBUG_LL_UART_ADDR
> >  
> >  	/* get line status and check for data present */
> > -	UART_REG_L	s0, UART_LSR(DEBUG_LL_UART_SHIFT)(t0)
> > -	andi	s0, s0, UART_LSR_DR
> > +	UART_REG_L	s1, UART_LSR(DEBUG_LL_UART_SHIFT)(t0)
> > +	andi	s1, s1, UART_LSR_DR
> >  
> >  #endif /* CONFIG_DEBUG_LL */
> >  .endm
> > @@ -159,10 +159,10 @@ static inline void debug_ll_ns16550_init(void)
> >  	debug_ll_tstc
> >  
> >  	/* try again */
> > -	beqz	s0, 204b
> > +	beqz	s1, 204b
> >  
> >  	/* read a character */
> > -	UART_REG_L	s0, UART_RBR(DEBUG_LL_UART_SHIFT)(t0)
> > +	UART_REG_L	s1, UART_RBR(DEBUG_LL_UART_SHIFT)(t0)
> >  
> >  #endif /* CONFIG_DEBUG_LL */
> >  .endm
> > diff --git a/arch/riscv/include/asm/riscv_nmon.h b/arch/riscv/include/asm/riscv_nmon.h
> > index 8a44e216d72d..3e349025febc 100644
> > --- a/arch/riscv/include/asm/riscv_nmon.h
> > +++ b/arch/riscv/include/asm/riscv_nmon.h
> > @@ -84,7 +84,7 @@ nmon_main:
> >  	debug_ll_getc
> >  
> >  	li	a0, 'q'
> > -	bne	s0, a0, 3f
> > +	bne	s1, a0, 3f
> >  
> >  	jal	a2, _nmon_outc_a0
> >  
> > @@ -92,13 +92,13 @@ nmon_main:
> >  
> >  3:
> >  	li	a0, 'd'
> > -	beq	s0, a0, nmon_cmd_d
> > +	beq	s1, a0, nmon_cmd_d
> >  
> >  	li	a0, 'w'
> > -	beq	s0, a0, nmon_cmd_w
> > +	beq	s1, a0, nmon_cmd_w
> >  
> >  	li	a0, 'g'
> > -	beq	s0, a0, nmon_cmd_g
> > +	beq	s1, a0, nmon_cmd_g
> >  
> >  	j	nmon_main_help
> >  
> > @@ -112,7 +112,7 @@ nmon_cmd_d:
> >  
> >  	nmon_outs	msg_nl
> >  
> > -	lw	a0, (s0)
> > +	lw	a0, (s1)
> >  	debug_ll_outhexw
> >  
> >  	j	nmon_main
> > @@ -124,13 +124,13 @@ nmon_cmd_w:
> >  	jal	a2, _nmon_outc_a0
> >  
> >  	jal	a2, _nmon_gethexw
> > -	move	s2, s0
> > +	move	s3, s1
> >  
> >  	li	a0, ' '
> >  	jal	a2, _nmon_outc_a0
> >  	jal	a2, _nmon_gethexw
> >  
> > -	sw	s0, 0(s2)
> > +	sw	s1, 0(s3)
> >  	j	nmon_main
> >  
> >  nmon_cmd_g:
> > @@ -140,11 +140,11 @@ nmon_cmd_g:
> >  	jal	a2, _nmon_outc_a0
> >  
> >  	jal	a2, _nmon_gethexw
> > -	move	s2, s0
> > +	move	s3, s1
> >  
> >  	nmon_outs	msg_nl
> >  
> > -	jalr	s2
> > +	jalr	s3
> >  	j	nmon_main
> >  
> >  _nmon_outc_a0:
> > @@ -169,37 +169,37 @@ _nmon_gethexw:
> >  _get_hex_digit:
> >  	debug_ll_getc
> >  
> > -	li	s1, CODE_ESC
> > -	beq	s0, s1, nmon_main
> > +	li	s2, CODE_ESC
> > +	beq	s1, s2, nmon_main
> >  
> > -	li	s1, '0'
> > -	bge	s0, s1, 0f
> > +	li	s2, '0'
> > +	bge	s1, s2, 0f
> >  	j	_get_hex_digit
> >  
> >  0:
> > -	li	s1, '9'
> > -	ble	s0, s1, 9f
> > +	li	s2, '9'
> > +	ble	s1, s2, 9f
> >  
> > -	li	s1, 'f'
> > -	ble	s0, s1, 1f
> > +	li	s2, 'f'
> > +	ble	s1, s2, 1f
> >  	j	_get_hex_digit
> >  
> >  1:
> > -	li	s1, 'a'
> > -	bge	s0, s1, 8f
> > +	li	s2, 'a'
> > +	bge	s1, s2, 8f
> >  
> >  	j	_get_hex_digit
> >  
> > -8: /* s0 \in {'a', 'b' ... 'f'} */
> > -	sub	a3, s0, s1
> > +8: /* s1 \in {'a', 'b' ... 'f'} */
> > +	sub	a3, s1, s2
> >  	addi	a3, a3, 0xa
> >  	j	0f
> >  
> > -9: /* s0 \in {'0', '1' ... '9'} */
> > +9: /* s1 \in {'0', '1' ... '9'} */
> >  	li	a3, '0'
> > -	sub	a3, s0, a3
> > +	sub	a3, s1, a3
> >  
> > -0:	move	a0, s0
> > +0:	move	a0, s1
> >  	debug_ll_outc_a0
> >  
> >  	sll	t2, t2, 4
> > @@ -212,7 +212,7 @@ _get_hex_digit:
> >  	j	_get_hex_digit
> >  
> >  0:
> > -	move	s0, t2
> > +	move	s1, t2
> >  
> >  _nmon_jr_ra_exit:
> >  	jr	a2
> > 
> 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2022-01-10 11:01 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-08 17:15 [PATCH 1/9] RISC-V: virt: activate all consoles Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 2/9] power: reset: add RISC-V/UC Berkely HTIF poweroff driver support Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 3/9] RISC-V: virt: riscvemu: add HTIF DEBUG_LL support Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 4/9] RISC-V: virt: riscvemu: repurpose 64k low RAM for state/environment Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 5/9] RISC-V: virt: riscvemu: be explicit about HTIF base address Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 6/9] RISC-V: virt: riscvemu: clear frame buffer before jumping to reset vector Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 7/9] RISC-V: don't use x8/s0/fp in assembly Ahmad Fatoum
2022-01-08 18:25   ` Ahmad Fatoum
2022-01-10 10:59     ` Antony Pavlov [this message]
2022-01-08 17:15 ` [PATCH 8/9] RISC-V: add stacktrace support via frame pointer walking Ahmad Fatoum
2022-01-08 17:15 ` [PATCH 9/9] RISC-V: Virt: enable more useful options Ahmad Fatoum
2022-01-12 10:23 ` [PATCH 1/9] RISC-V: virt: activate all consoles Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220110135946.772f42aea56fedc19c68c2d8@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox