From: Jules Maselbas <jmaselbas@kalray.eu>
To: barebox@lists.infradead.org
Cc: Clement Leger <clement.leger@bootlin.com>,
Louis Morhet <lmorhet@kalray.eu>, Luc Michel <lmichel@kalray.eu>,
Yann Sionneau <ysionneau@kalray.eu>,
Clement Leger <cleger@kalray.eu>,
Jules Maselbas <jmaselbas@kalray.eu>
Subject: [PATCH 04/13] common: elf: add elf_load_binary
Date: Fri, 14 Jan 2022 17:52:03 +0100 [thread overview]
Message-ID: <20220114165208.9980-5-jmaselbas@kalray.eu> (raw)
In-Reply-To: <20220114165208.9980-1-jmaselbas@kalray.eu>
From: Clement Leger <cleger@kalray.eu>
In order to load elf from a binary buffer, add elf_load_binary. This
will be used by FIT support to allow loading an elf from FIT.
Signed-off-by: Clement Leger <cleger@kalray.eu>
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
common/elf.c | 83 +++++++++++++++++++++++++++++++++++++--------------
include/elf.h | 1 +
2 files changed, 62 insertions(+), 22 deletions(-)
diff --git a/common/elf.c b/common/elf.c
index af22be37e6..f10fb77953 100644
--- a/common/elf.c
+++ b/common/elf.c
@@ -101,15 +101,17 @@ static int elf_section_cmp(void *priv, struct list_head *a, struct list_head *b)
static int load_elf_to_memory(struct elf_image *elf)
{
void *dst;
- int ret, fd;
+ int ret, fd = -1;
u64 p_filesz, p_memsz, p_offset;
struct elf_section *r;
struct list_head *list = &elf->list;
- fd = open(elf->filename, O_RDONLY);
- if (fd < 0) {
- pr_err("could not open: %s\n", errno_str());
- return -errno;
+ if (elf->filename) {
+ fd = open(elf->filename, O_RDONLY);
+ if (fd < 0) {
+ pr_err("could not open: %s\n", errno_str());
+ return -errno;
+ }
}
list_for_each_entry(r, list, list) {
@@ -118,21 +120,26 @@ static int load_elf_to_memory(struct elf_image *elf)
p_memsz = elf_phdr_p_memsz(elf, r->phdr);
dst = (void *) (phys_addr_t) elf_phdr_p_paddr(elf, r->phdr);
- ret = lseek(fd, p_offset, SEEK_SET);
- if (ret == -1) {
- pr_err("lseek at offset 0x%llx failed\n", p_offset);
- close(fd);
- return ret;
- }
-
pr_debug("Loading phdr offset 0x%llx to 0x%p (%llu bytes)\n",
p_offset, dst, p_filesz);
- if (read_full(fd, dst, p_filesz) < 0) {
- pr_err("could not read elf segment: %s\n",
- errno_str());
- close(fd);
- return -errno;
+ if (fd >= 0) {
+ ret = lseek(fd, p_offset, SEEK_SET);
+ if (ret == -1) {
+ pr_err("lseek at offset 0x%llx failed\n",
+ p_offset);
+ close(fd);
+ return ret;
+ }
+
+ if (read_full(fd, dst, p_filesz) < 0) {
+ pr_err("could not read elf segment: %s\n",
+ errno_str());
+ close(fd);
+ return -errno;
+ }
+ } else {
+ memcpy(dst, elf->hdr_buf + p_offset, p_filesz);
}
if (p_filesz < p_memsz)
@@ -202,6 +209,37 @@ static int elf_check_image(struct elf_image *elf, void *buf)
return 0;
}
+static void elf_init_struct(struct elf_image *elf)
+{
+ INIT_LIST_HEAD(&elf->list);
+ elf->low_addr = (void *) (unsigned long) -1;
+ elf->high_addr = 0;
+ elf->filename = NULL;
+}
+
+struct elf_image *elf_open_binary(void *buf)
+{
+ int ret;
+ struct elf_image *elf;
+
+ elf = calloc(1, sizeof(*elf));
+ if (!elf)
+ return ERR_PTR(-ENOMEM);
+
+ elf_init_struct(elf);
+
+ elf->hdr_buf = buf;
+ ret = elf_check_image(elf, buf);
+ if (ret) {
+ free(elf);
+ return ERR_PTR(-EINVAL);
+ }
+
+ elf->entry = elf_hdr_e_entry(elf, elf->hdr_buf);
+
+ return elf;
+}
+
static struct elf_image *elf_check_init(const char *filename)
{
int ret, fd;
@@ -213,9 +251,7 @@ static struct elf_image *elf_check_init(const char *filename)
if (!elf)
return ERR_PTR(-ENOMEM);
- INIT_LIST_HEAD(&elf->list);
- elf->low_addr = (void *) (unsigned long) -1;
- elf->high_addr = 0;
+ elf_init_struct(elf);
/* First pass is to read elf header only */
fd = open(filename, O_RDONLY);
@@ -299,7 +335,10 @@ void elf_close(struct elf_image *elf)
{
elf_release_regions(elf);
- free(elf->hdr_buf);
- free(elf->filename);
+ if (elf->filename) {
+ free(elf->hdr_buf);
+ free(elf->filename);
+ }
+
free(elf);
}
diff --git a/include/elf.h b/include/elf.h
index 7970fd2c95..12673e93ed 100644
--- a/include/elf.h
+++ b/include/elf.h
@@ -414,6 +414,7 @@ static inline size_t elf_get_mem_size(struct elf_image *elf)
return elf->high_addr - elf->low_addr;
}
+struct elf_image *elf_open_binary(void *buf);
struct elf_image *elf_open(const char *filename);
void elf_close(struct elf_image *elf);
int elf_load(struct elf_image *elf);
--
2.17.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2022-01-14 16:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-14 16:51 [PATCH 00/13] kvx arch update Jules Maselbas
2022-01-14 16:52 ` [PATCH 01/13] kvx: dma: Remove arch dma_map/unmap_single Jules Maselbas
2022-01-14 16:52 ` [PATCH 02/13] kvx: Move LINUX_BOOT_PARAM_MAGIC in asm/common.h Jules Maselbas
2022-01-14 16:52 ` [PATCH 03/13] kvx: Accept LINUX_BOOT_PARAM_MAGIC as a valid magic value Jules Maselbas
2022-01-14 16:52 ` Jules Maselbas [this message]
2022-01-14 17:21 ` [PATCH 04/13] common: elf: add elf_load_binary Clément Léger
2022-01-14 17:24 ` Jules Maselbas
2022-01-14 16:52 ` [PATCH 05/13] kvx: enable FITIMAGE support Jules Maselbas
2022-01-14 16:52 ` [PATCH 06/13] clocksource: kvx: Register as postcore_platform_driver Jules Maselbas
2022-01-14 16:52 ` [PATCH 07/13] watchdog: kvx: do not disable watchdog on probe Jules Maselbas
2022-01-14 16:52 ` [PATCH 08/13] nvmem: add kvx otp non volatile regbank support Jules Maselbas
2022-01-17 8:24 ` Sascha Hauer
2022-01-17 11:17 ` Jules Maselbas
2022-01-14 16:52 ` [PATCH 09/13] kvx: add kvx_sfr_field_val Jules Maselbas
2022-01-14 16:54 ` [PATCH 10/13] drivers: add soc hierarchy properly Jules Maselbas
2022-01-14 16:54 ` [PATCH 11/13] soc: add kvx_socinfo driver Jules Maselbas
2022-01-14 16:54 ` [PATCH 12/13] kvx: Update defconfig Jules Maselbas
2022-01-14 16:54 ` [PATCH 13/13] kvx: dts: Update k200.dts Jules Maselbas
2022-01-14 17:31 ` Clément Léger
2022-01-14 17:06 ` [PATCH 10/13] drivers: add soc hierarchy properly Ahmad Fatoum
2022-01-14 17:11 ` Jules Maselbas
2022-01-14 17:20 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220114165208.9980-5-jmaselbas@kalray.eu \
--to=jmaselbas@kalray.eu \
--cc=barebox@lists.infradead.org \
--cc=cleger@kalray.eu \
--cc=clement.leger@bootlin.com \
--cc=lmichel@kalray.eu \
--cc=lmorhet@kalray.eu \
--cc=ysionneau@kalray.eu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox