RE: Uart set up in PBL

["Barbier, Renaud" <renaud.barbier@abaco.com>]

> > Would it possible from the PBL to read the "baudrate" variable from the
> environment?
> 
> Normally, you would want to avoid doing anything, but the
> bare minimum from PBL. Does the baudrate device parameter
> work for you?
> 
[Barbier, Renaud] 
Just to give you a bit more context. In our platform ARM (all non-pbl) or PPC, we add a call to do a PBIT memory test before starting barebox. The uart is initialized just before that at a fixed baud rate of  9600 bauds. Now we have a requirement to support more than one baud rate configurable by the user. And our next ARM based board is going to have a PBL.

Are you saying that from the PBL, I can do something like baud=getenv("baudrate") to get the environment variable value. This would require to have /dev/env0 instantiated, would not it?
Does not that require to have the environment init code (fs support and all) be compiled as part of the PBL (lwl-y +=....).
My environment variables are in QSPI, so I would think I could parse the environment variable without the whole barebox support instead.
If not possible then I think we can find some other way to retrieve the baud rate.

Cheers.


> Cheers,
> Ahmad
> 
> >
> > Cheers,
> > Renaud
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> >
> https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.infra
> dead.org%2Fmailman%2Flistinfo%2Fbarebox&data=04%7C01%7Crenaud.b
> arbier%40abaco.com%7C5feb6191d4d647f8afdb08d8df0d5b4c%7Ce6f2745189
> 9d4d0db8fa88baafa551a7%7C0%7C0%7C637504595763337955%7CUnknown%
> 7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiL
> CJXVCI6Mn0%3D%7C1000&sdata=U5XVs%2Bf0L4t6LX49D7IJZNexAa77Pkjy
> kZv74%2FJ8klk%3D&reserved=0
> >
> 
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       |
> https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pen
> gutronix.de%2F&data=04%7C01%7Crenaud.barbier%40abaco.com%7C5fe
> b6191d4d647f8afdb08d8df0d5b4c%7Ce6f27451899d4d0db8fa88baafa551a7%7
> C0%7C0%7C637504595763337955%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC
> 4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&a
> mp;sdata=H1Ifw3D43oCbwUMkyKECroRAm22bBXka2wbBMGFhM%2BE%3D&a
> mp;reserved=0  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox